גזירים במסך

ב-Android 9 נוספה תמיכה בהטמעה של סוגים שונים של חתכים במסך במכשירים. חתכים במסך מאפשרים ליצור חוויות immersive (מרתקות) מקצה לקצה, ועדיין משאירים מקום לחיישנים חשובים בחזית המכשירים.

מגרעת במסך בחלק העליון במרכז

איור 1. מגרעת במסך בחלק העליון במרכז

ב-Android 9 יש תמיכה בסוגי החורים הבאים:

  • במרכז למעלה: חור באמצע הקצה העליון
  • החלק העליון לא במרכז: יכול להיות שהחתוך נמצא בפינה או מעט מחוץ למרכז
  • תחתון: חור בתחתית התמונה
  • כפול: פתח אחד בחלק העליון ופתח אחד בחלק התחתון

דוגמאות ומקור

קוד מנהל החלונות הבא בקובץ PhoneWindowManager.java מראה איך מסגרות התצוגה מוכנסות לאזור הבטוח כשLAYOUT_IN_DISPLAY_CUTOUT_MODE_ALWAYS לא מוגדר.

// Ensure that windows with a DEFAULT or NEVER display cutout mode are laid out in
// the cutout safe zone.
if (cutoutMode != LAYOUT_IN_DISPLAY_CUTOUT_MODE_ALWAYS) {
    final Rect displayCutoutSafeExceptMaybeBars = mTmpDisplayCutoutSafeExceptMaybeBarsRect;
    displayCutoutSafeExceptMaybeBars.set(displayFrames.mDisplayCutoutSafe);
    if (layoutInScreen && layoutInsetDecor && !requestedFullscreen
            && cutoutMode == LAYOUT_IN_DISPLAY_CUTOUT_MODE_DEFAULT) {
        // At the top we have the status bar, so apps that are
        // LAYOUT_IN_SCREEN | LAYOUT_INSET_DECOR but not FULLSCREEN
        // already expect that there's an inset there and we don't need to exclude
        // the window from that area.
        displayCutoutSafeExceptMaybeBars.top = Integer.MIN_VALUE;
    }
    if (layoutInScreen && layoutInsetDecor && !requestedHideNavigation
            && cutoutMode == LAYOUT_IN_DISPLAY_CUTOUT_MODE_DEFAULT) {
        // Same for the navigation bar.
        switch (mNavigationBarPosition) {
            case NAV_BAR_BOTTOM:
                displayCutoutSafeExceptMaybeBars.bottom = Integer.MAX_VALUE;
                break;
            case NAV_BAR_RIGHT:
                displayCutoutSafeExceptMaybeBars.right = Integer.MAX_VALUE;
                break;
            case NAV_BAR_LEFT:
                displayCutoutSafeExceptMaybeBars.left = Integer.MIN_VALUE;
                break;
        }
    }
    if (type == TYPE_INPUT_METHOD && mNavigationBarPosition == NAV_BAR_BOTTOM) {
        // The IME can always extend under the bottom cutout if the navbar is there.
        displayCutoutSafeExceptMaybeBars.bottom = Integer.MAX_VALUE;
    }
    // Windows that are attached to a parent and laid out in said parent already avoid
    // the cutout according to that parent and don't need to be further constrained.
    // Floating IN_SCREEN windows get what they ask for and lay out in the full screen.
    // They will later be cropped or shifted using the displayFrame in WindowState,
    // which prevents overlap with the DisplayCutout.
    if (!attachedInParent && !floatingInScreenWindow) {
        mTmpRect.set(pf);
        pf.intersectUnchecked(displayCutoutSafeExceptMaybeBars);
        parentFrameWasClippedByDisplayCutout |= !mTmpRect.equals(pf);
    }
    // Make sure that NO_LIMITS windows clipped to the display don't extend under the
    // cutout.
    df.intersectUnchecked(displayCutoutSafeExceptMaybeBars);
}

SystemUI מבצעת רינדור באזור החור, וצריך לקבוע איפה היא יכולה לצייר. PhoneStatusBarView.java הוא דוגמה לתצוגה שמאפשרת לקבוע איפה נמצאת הקצה המעוגל של המסך, כמה הוא גדול ואם החלק הפנימי של סרגל הניווט נמצא מחוץ לאזור הקצה המעוגל.

שינוי הערך של onApplyWindowInsets() מאפשר לתצוגה לקבוע איפה נמצאת החתיכה החתוכה ולעדכן את הפריסה שלה בהתאם.

@Override
    public WindowInsets onApplyWindowInsets(WindowInsets insets) {
        if (updateOrientationAndCutout(mLastOrientation)) {
            updateLayoutForCutout();
            requestLayout();
        }
        return super.onApplyWindowInsets(insets);
    }

השיטות האלה מתארות איך מטפלים בחתכים בסרגל הסטטוס בכל המקרים (כלומר, בחלק העליון במרכז, בחלק העליון ללא מרכוז, בחלק התחתון ובחתכים כפולים בכל הכיוונים).

דרישות

כדי לוודא שאפליקציות לא יושפעו לרעה מהחורים, עליכם לוודא:

  • סרגל הסטטוס מגיע לגובה של פתח המצלמה לפחות בפריסה לאורך
  • אזור החיתוך צריך להיות בפורמט letterbox במצב מסך מלא ובמצב לרוחב

אפשר להוסיף למכשיר עד חור אחד בכל אחד מהקצוות הקצרים (למעלה ולמטה).

מידע נוסף זמין בCDD.

הטמעה

כדי להטמיע חתכים במסך במכשיר, צריך להגדיר את הערכים הבאים לממשק המשתמש של המערכת.

ערך תיאור
quick_qs_offset_height

הגדרת השוליים העליונים של חלונית ההגדרות המהירות. השעון והסוללה מוצגים מעל החלונית.

ב-values-land, מגדירים את הערך ל-status_bar_height_landscape, ובפורמט portrait מגדירים את הערך ל-48dp (ברירת המחדל) או לגובה של החלק החתוך, לפי הערך הגדול מביניהם. אם רוצים, אפשר להגדיר את התמונה גבוהה יותר מהחור.

quick_qs_total_height

הגובה הכולל של חלונית ההגדרות המהירות (חלונית ההגדרות המהירות המקוצרת) כשחלונית ההתראות מורחבת, כולל המרחב שמעל החלונית שמכילה את השעון.

בגלל אופן הפריסה של ההגדרות המהירות, צריך לדעת את הגובה הכולל של חלונית ההגדרות המהירות (כולל ההיסט) באופן סטטי, ולכן צריך לשנות את הערך הזה לפי אותה דלתא quick_qs_offset_height. כברירת מחדל, הערך הזה הוא 152dp בפורמט לאורך, ו-176dp בפורמט לרוחב.

status_bar_height_portrait

גובה ברירת המחדל של שורת הסטטוס מנקודת המבט של המסגרת.

ברוב המכשירים, הערך שמוגדר כברירת מחדל הוא 24dp. כשיש חיתוך, מגדירים את הערך הזה לגובה החיתוך. אם רוצים, אפשר להגדיר את התמונה גבוהה יותר מהחור.

status_bar_height_landscape

הגובה של שורת הסטטוס בפריסה לרוחב. התכונה תומכת רק בקצוות הקצרים של המכשיר, כך שהגובה של שורת המצב תמיד יישאר ללא שינוי.

במכשיר ללא חור, הערך הזה שווה ל-status_bar_height_portrait. כשיש חור בתמונה, צריך לשמור על הערך הזה בגובה ברירת המחדל של שורת הסטטוס.

config_mainBuiltInDisplayCutout

הנתיב שמגדיר את צורת היצירה. זוהי מחרוזת שניתנת לניתוח על ידי android.util.PathParser, והיא מגדירה למערכת את הגודל והצורה של היצירה.

אפשר לציין את @dp בנתיב כדי לדמות טירגוט של צורה למכשירים שונים. מכיוון שלחורים פיזיים בחלק העליון של המסך הם בגודל פיקסלים מדויק, לא משתמשים במאפיין @dp כשמגדירים את הנתיב לחור בחומרה.

config_fillMainBuiltinDisplayCutout

ערך בוליאני שקובע אם לצייר את נתיב החיתוך (שמתוארת למעלה) בתוכנה. אפשר להשתמש בהם כדי לדמות חיתוך או כדי למלא חתיכה פיזית חתוכה כדי להשיג פסאודו-החלקה.

אם הערך הוא True, התא config_mainBuiltInDisplayCutout יתמלא בשחור.

ההגדרות של ברירת המחדל מפורטות בקובצי dimens הבאים:

דוגמה לשכבת-על של חיתוך מודגם:

<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">

    <!-- The bounding path of the cutout region of the main built-in display.
         Must either be empty if there is no cutout region, or a string that is parsable by
         {@link android.util.PathParser}.

         The path is assumed to be specified in display coordinates with pixel units and in
         the display's native orientation, with the origin of the coordinate system at the
         center top of the display.

         To facilitate writing device-independent emulation overlays, the marker `@dp` can be
         appended after the path string to interpret coordinates in dp instead of px units.
         Note that a physical cutout should be configured in pixels for the best results.
         -->
    <string translatable="false" name="config_mainBuiltInDisplayCutout">
        M 0,0
        L -48, 0
        L -44.3940446283, 36.0595537175
        C -43.5582133885, 44.4178661152 -39.6, 48.0 -31.2, 48.0
        L 31.2, 48.0
        C 39.6, 48.0 43.5582133885, 44.4178661152 44.3940446283, 36.0595537175
        L 48, 0
        Z
        @dp
    </string>

    <!-- Whether the display cutout region of the main built-in display should be forced to
         black in software (to avoid aliasing or emulate a cutout that is not physically existent).
     -->
    <bool name="config_fillMainBuiltInDisplayCutout">true</bool>

    <!-- Height of the status bar -->
    <dimen name="status_bar_height_portrait">48dp</dimen>
    <dimen name="status_bar_height_landscape">28dp</dimen>
    <!-- Height of area above QQS where battery/time go (equal to status bar height if > 48dp) -->
    <dimen name="quick_qs_offset_height">48dp</dimen>
    <!-- Total height of QQS (quick_qs_offset_height + 128) -->
    <dimen name="quick_qs_total_height">176dp</dimen>

</resources>

אימות

כדי לאמת את ההטמעה של חתכים במסך, מריצים את בדיקות CTS בקטע tests/framework/base/windowmanager/src/android/server/wm.