클래스 인덱스

API 클래스입니다. 모든 API 패키지를 확인하세요.

AaptParser 'aapt 덤프 배지'의 출력을 구문 분석하여 apk에서 정보를 추출하는 클래스입니다.
AaptParser.AaptVersion APK 파일을 구문 분석하는 데 사용되는 AAPT 버전 옵션의 열거형입니다.
아비 ABI를 나타내는 클래스입니다.
AbiFormatter abi용 유틸리티 클래스입니다.
AbiUtils 장치 ABI를 처리하기 위한 유틸리티 클래스
추상연결 추상 연결 표현.
추상호스트모니터 호스트 상태 모니터링을 위한 일반적인 클래스입니다.
AbstractXml파서 XML 파일 구문 분석을 위한 도우미 기본 클래스
AbstractXmlParser.ParseException XML 입력을 구문 분석할 수 없는 경우 발생합니다.
AcloudConfigParser Acloud 구성을 구문 분석하는 도우미 클래스입니다(클라우드 장치 인스턴스를 시작하는 데 사용됨).
AcloudConfigParser.AcloudKeys 구성에서 검색할 수 있는 키 세트입니다.
작업 진행 중 일반 작업이 진행 중입니다.
액티브트레이스 활성 추적을 설명하고 관리하는 데 도움이 되는 기본 클래스입니다.
활동상태검사기 모듈이 끝날 때 실행되는 남은 활동에 대한 상태 검사기입니다.
AdbRootElevator 필요한 경우 구성 시 adb 루트를 활성화하고 완료되면 루트 상태를 복원하는 AutoCloseable 입니다.
AdbSsh연결 SSH 브리지를 통한 Adb 연결.
AdbStopServerPreparer adb 테스트 실행 전후에 호스트에서 adb 서버를 중지하는 대상 준비자입니다.
AdbTcpConnection 장치의 표준 adb 연결로 간주되는 장치의 기본 연결 표현입니다.
AdbUtils adb 작업을 위한 유틸리티 클래스입니다.
AfterClassWithInfo AfterClass 와 유사하지만 주석이 달린 메서드에는 TestInformation 매개변수가 필요합니다.
AggregatePostProcessor 다중 반복 테스트 실행 중에 수집된 숫자 지표에 대한 최소, 최대, 평균, 분산, 표준 편차, 합계, 개수 및 선택적으로 백분위수를 제공하여 이를 두 배로 처리하는 지표 수집기입니다.
모든TestApps설치설정 IDeviceBuildInfo#getTestsDir() 폴더의 모든 앱을 장치에 설치하는 ITargetPreparer .
AltDirBehavior 다양한 테스트 아티팩트 설치 프로그램/푸셔에 대한 대체 디렉터리 동작을 정의하는 열거형

AndroidJUnit테스트 android.support.test.runner.AndroidJUnitRunner를 사용하여 특정 기기에서 계측 테스트 패키지를 실행하는 테스트입니다.
AoaTargetPreparer AOAv2(Android 오픈 액세서리) 프로토콜을 사용하여 일련의 작업(예: 클릭 및 스와이프)을 실행하는 ITargetPreparer 입니다.
앱빌드정보 Android 애플리케이션과 해당 테스트 패키지를 나타내는 IBuildInfo .
앱장치빌드정보 이 클래스는 더 이상 사용되지 않습니다. IDeviceBuildInfo 직접 사용하세요.
앱 설정 APK와 해당 테스트를 설치하는 ITargetPreparer 입니다.
앱버전 가져오기 프로그램 기기에서 앱 버전 문자열을 가져오는 유틸리티 클래스입니다.
AppVersionFetcher.AppVersionInfo 앱 버전 정보 유형.
아치모듈컨트롤러 특정 아키텍처와 일치하지 않는 경우 테스트를 실행하지 않는 모듈 컨트롤러입니다.
ArgsOptionParser 구문 분석된 명령줄 인수에서 Option 필드를 채웁니다.
ArrayUtil 배열의 유틸리티 메서드
아트ChrootPreparer ART 테스트를 위한 chroot 디렉터리를 만듭니다.
아트지테스트
유물세부정보 이는 CAS 도구에 의해 생성된 콘텐츠 및 설명자의 구조를 설명합니다.
ArtifactDetails.ArtifactFileDescriptor
아티팩트 분석기 통찰력을 얻기 위해 빌드 아티팩트를 분석하는 데 도움이 되는 유틸리티입니다.
아트런테스트 ART 실행 테스트를 실행하는 테스트 실행기입니다.
ArtRunTest.AdbShellCommandException ADB 쉘 명령 실행 중에 발생한 오류를 보고하는 예외 클래스입니다.
ATestFileSystemLogSaver 이 LogSaver 클래스는 ATest에서 특정 경로에 로그를 저장하는 데 사용됩니다.
AtestRunner ITestSuite 구현
AtraceCollector 테스트 중에 atrace를 실행하고 결과를 수집하여 호출에 기록하는 IMetricCollector 입니다.
AtraceRunMetricCollector 테스트 장치에서 지정된 디렉터리 아래의 모든 테스트 디렉터리에서 추적을 수집하고, 테스트 디렉터리를 기록하고, 테스트 디렉터리 아래의 추적 파일을 사후 처리하고 측정항목을 집계합니다.
자동로그수집기 하네스에서 자동으로 처리할 수 있는 컬렉터를 설명하는 열거형입니다.
자동화된 보고자 Tradefed 자동 보고기의 매핑을 정의하는 클래스입니다.
평균 포스트 프로세서 메트릭 목록의 평균을 계산하는 사후 프로세서 구현.

배경장치액션 작업이 취소될 때까지 필요에 따라 반복되는 특정 장치에서 명령을 실행합니다.
BaseDeviceMetricCollector onTestRunStart(com.android.tradefed.device.metric.DeviceMetricData)ERROR(/#onTestRunEnd(com.android.tradefed.device.metric.DeviceMetricData,Map)) 에서 수집을 시작하고 중지할 수 있는 IMetricCollector 의 기본 구현입니다.
BaseEmulatorPreparer 로컬 에뮬레이터를 시작하기 위한 일반적인 준비자입니다.
BaseHostJUnit4테스트 호스트 JUnit4 스타일 테스트를 실행하기 위한 기본 테스트 클래스입니다.
BaseLeveledLog출력 이름이나 구성 요소를 기반으로 일부 태그를 필터링할 수 있는 ILeveledLogOutput 의 기본 구현입니다.
베이스모듈컨트롤러 모듈이 실행되어야 하는지 여부를 확인하기 위해 구현되어야 하는 IModuleController 의 기본 구현입니다.
BaseMultiTargetPreparer 개체를 비활성화할 수 있는 IMultiTargetPreparer 의 기본 구현입니다.
베이스포스트 프로세서 모든 구현이 확장되어야 하는 기본 IPostProcessor 입니다.
기본재시도결정 IRetryDecision 의 기본 구현입니다.
BaseStreamLogger <OS는 OutputStream을 확장함> 로그 메시지를 출력 스트림과 stdout으로 보내는 ILeveledLogOutput .
BaseTargetPreparer 개체의 비활성화 여부를 제어할 수 있는 ITargetPreparer 에 대한 기본 구현 클래스입니다.
BaseTestSuite 새로운 제품군 시스템으로 호환성 테스트 제품군을 실행하기 위한 테스트입니다.
배터리컨트롤러 장치의 배터리 충전 상태를 제어할 수 있는 유틸리티 클래스입니다.
배터리충전장치복구 장치의 배터리 수준이 지정된 임계값 아래로 떨어지면 명령을 트리거할 수 있습니다.
배터리온도
배터리를 사용할 수 없음장치복구 배터리 수준을 사용할 수 없는 경우 구성을 트리거하는 복구 검사기입니다.
BeforeClassWithInfo BeforeClass 와 유사하지만 주석이 달린 메소드에는 TestInformation 매개변수가 필요합니다.
바이너리상태 IGNORE 무작동 상태로 ON/OFF 상태를 기록하는 데 사용되는 열거형입니다.
블루투스연결지연수집기 수집기는 사전 정의된 통계 기간 측정항목 구성을 기기에 푸시하고 각 프로필에 대한 Bluetooth 연결 기간을 수집합니다.
BluetoothConnectionStateCollector 이 수집기는 BluetoothConnectionStateChanged 측정항목을 수집하고 각 프로필의 연결 상태 번호를 기록합니다.
블루투스연결성공률포스트 프로세서 블루투스 프로필의 성공률을 계산하는 후처리기 구현

숫자 배열 예 [0, 1, 2, 3, 0, 1, 2, 3]에 Bluetooth 연결 상태를 포함하는 측정 항목을 지정하려면 "metric-key-match"를 사용하십시오.

BluetoothHciSnoopLogCollector DUT에서 Bluetooth HCI 스누프 로깅을 활성화하고 각 테스트에 대한 로그를 수집하는 수집기입니다.
BluetoothUtils 장치에서 BluetoothInstrumentation을 호출하기 위한 유틸리티 함수

기기 측 Bluetooth 계측 코드는 AOSP frameworks/base/core/tests/bluetoothtests 에서 찾을 수 있습니다.

부트스트랩빌드 제공자 테스트 장치에서 빌드 정보를 부트스트랩하는 IDeviceBuildProvider

이는 일반적으로 외부에서 제공되는 빌드가 있는 장치에 사용됩니다.

BootstrapServiceFileResolverLoader 서비스 로딩 기능을 사용하여 해석기를 로드합니다.
버그 신고 플랫 버그 보고서 및 압축된 버그 보고서(bugreportz)와 호환되는 버그 보고서 파일 참조를 보유하는 개체입니다.
버그 신고 수집기 구성 가능한 이벤트가 발생할 때 버그 보고서를 수집한 다음 각 버그 보고서가 수집된 후 해당 하위 항목에서 ITestInvocationListener#testLog 호출하는 통과 ITestInvocationListener 입니다.
BugreportCollector.Filter
BugreportCollector.Freq
BugreportCollector.Noun
BugreportCollector.Predicate 버그 신고를 캡처할 시기를 설명하는 전체 조건자입니다.
BugreportCollector.Relation
BugreportCollector.SubPredicate
BugreportzOnFailureCollector 테스트 사례가 실패하면 버그 보고서를 수집합니다.
BugreportzOnTestCaseFailureCollector 실행 중인 테스트 사례가 실패하면 버그 보고서를 수집합니다.
빌드 분석 단일 빌드 분석의 결과를 나타냅니다.
빌드오류 제공된 빌드가 실행되지 않으면 발생합니다.
빌드정보 ITestDevice 와 연결되어야 하는 IBuildInfo 의 일반 구현입니다.
BuildInfoKey 빌드 정보 쿼리와 관련된 클래스 보유 열거입니다.
BuildInfoKey.BuildInfoFileKey IBuildInfo.getFile(com.android.tradefed.build.BuildInfoKey.BuildInfoFileKey) 통해 쿼리할 수 있는 알려진 모든 파일 형식을 설명하는 열거형입니다.
BuildInfoRecorder 빌드 정보 메타데이터를 지정된 파일에 쓰는 ITargetPreparer 입니다.
BuildInfoUtil IBuildInfo 조작을 돕는 유틸리티 클래스
빌드검색오류 테스트용 빌드를 검색하는 동안 치명적인 오류가 발생했습니다.
빌드직렬화된 버전 모든 IBuildInfo 의 현재 직렬화 버전을 포함하는 클래스입니다.
BuildTestsZipUtils Android 빌드 시스템에서 생성된 테스트 zip과 관련된 작업을 위한 도우미 클래스입니다.
대량이메일러 전송 간격, 초기 버스트 크기, 수신자 및 총 메시지 수 등의 구성을 허용하는 이메일 발신자 유틸리티입니다.
BundletoolUtil Bundletool 명령줄을 사용하여 기기에 .apk를 설치하는 유틸리티 클래스입니다.
ByteArrayInputStreamSource
ByteArrayList 경량 바이트 배열을 나타내는 클래스입니다.
ByteArrayUtil 바이트 배열에서 작동하는 유틸리티(예: 바이트를 정수로 변환)

자동차모듈컨트롤러 이 컨트롤러는 자동차가 아닌 장치에서 테스트 사례가 실행되는 것을 방지합니다.
CarryDnaeError JUnit4 프레임워크를 통해 DeviceNotAvailableException 전달하는 내부 RuntimeException .
CarryInterruptedException 테스트 단계 제한 시간이 트리거되고 InterruptedException이 테스트 실행 스레드에서 호출 실행 스레드로 전달되어야 할 때 발생합니다.
Cdma장치성 노출증 CDMA 라디오를 사용하여 실제 Android 기기에 이미지를 플래시하는 클래스입니다.
CecControllerTokenProvider CEC(Consumer Electronics Control) 관련 토큰을 위한 토큰 공급자입니다.
중앙디렉토리정보 CentralDirectoryInfo는 zip 파일 내의 파일/폴더 정보를 포함하는 클래스입니다.
페어링 준비자 확인 기본 장치와 컴패니언 장치 간의 BT 결합을 확인하는 CompanionAwarePreparer
CircularAtraceUtil 주로 Monkey 테스트 중 ANR의 근본 원인을 식별하기 위해 개발된 atrace 유틸리티입니다.
원형바이트배열 순환 버퍼로 작동하고 배열에 있는 모든 값의 총합을 추적하는 고정 크기 배열을 보유하기 위한 데이터 구조입니다.
ClangCodeCoverageCollector 장치에서 Clang 적용 범위 측정값을 가져와 테스트 아티팩트로 기록하는 BaseDeviceMetricCollector 입니다.
ClassNotFoundConfigurationException 객체의 클래스를 찾을 수 없는 경우에 대한 ConfigurationException .
클래스 경로 스캐너 클래스 경로에서 항목을 찾습니다.
ClassPathScanner.ClassNameFilter Java 클래스 이름을 필터링하고 변환하는 IClassPathFilter 입니다.
ClassPathScanner.ExternalClassNameFilter 내부 클래스를 거부하는 ClassNameFilter
ClassPathScanner.IClassPathFilter 클래스 경로 항목 경로에 대한 필터

FileFilter 이후 패턴화됨

ClockworkUtils 다중 장치 로직을 공유하기 위한 시계태엽 유틸리티
닫기 가능한TraceScope try-with-resources를 통해 추적 섹션을 보고할 수 있는 범위가 지정된 클래스
클러스터빌드정보 TFC에서 파이프된 빌드를 위한 IBuildInfo 클래스입니다.
ClusterBuildProvider TFC 테스트 리소스를 다운로드하기 위한 IBuildProvider 입니다.
클러스터클라이언트 TFC 백엔드와 상호작용하기 위한 IClusterClient 구현입니다.
클러스터명령 TF 클러스터에서 가져온 작업을 나타내는 클래스입니다.
ClusterCommand.RequestType
ClusterCommand.State TF 클러스터의 명령 상태입니다.
ClusterCommandConfigBuilder 클러스터 명령에 대한 구성 파일을 빌드하는 클래스입니다.
ClusterCommand이벤트 업로드할 클러스터 명령 이벤트를 캡슐화하는 클래스입니다.
ClusterCommandEvent.Builder
ClusterCommandEvent.Type
ClusterCommandLauncher 하위 프로세스 TF를 통해 TFC에서 명령을 실행하는 IRemoteTest 클래스입니다.
ClusterCommandScheduler TFC(Tradefed Cluster)를 지원하는 ICommandScheduler 입니다.
클러스터명령상태 TF Cluster의 명령에 대한 상태 및 취소 이유를 나타내는 클래스입니다.
ClusterDeviceInfo 업로드할 클러스터 장치 정보를 캡슐화하는 클래스입니다.
ClusterDeviceInfo.Builder
ClusterDeviceMonitor Tradefed 클러스터 서비스에 결과를 보고하는 IDeviceMonitor 구현입니다.
ClusterEventUploader <T는 IClusterEvent를 확장합니다. > IClusterEvent TFC에 업로드하는 ClusterEventUploader 클래스.
ClusterHost이벤트 업로드할 클러스터 호스트 이벤트를 캡슐화하는 클래스입니다.
ClusterHostEvent.Builder
ClusterHostEvent.HostEventType 다양한 유형의 호스트 이벤트 열거형입니다.
ClusterHostUtil TF 클러스터의 정적 유틸리티 기능으로 전역 구성 인스턴스, 호스트 정보 등을 가져옵니다.
ClusterLogSaver 테스트 출력을 TFC에 업로드하는 ILogSaver 클래스입니다.
ClusterLogSaver.FilePickingStrategy 파일 따기 전략.
클러스터옵션
코드 적용 범위 테스트 특정 장치에서 계측 테스트 패키지를 실행하고 코드 적용 범위 보고서를 생성하는 테스트입니다.
ByteOutputReceiver 수집 전체 쉘 출력을 byte[] 로 수집하는 IShellOutputReceiver .
출력수신기 수집 전체 셸 출력을 하나의 String 으로 수집하는 IShellOutputReceiver 입니다.
테스트리스너 수집 모든 테스트 결과를 수집하는 ITestInvocationListener 입니다.
CollectorHelper 여러 위치에서 필요한 일부 IMetricCollector 작업을 수행하는 도우미입니다.
명령파일파서 일련의 명령줄이 포함된 파일에 대한 파서입니다.
CommandFileParser.CommandLine
명령인터럽터 TradeFederation 명령을 중단하거나 중단 불가능으로 표시할 수 있는 서비스입니다.
CommandLineBuildInfoBuilder 명령줄에서 일반적인 빌드 정보 인수를 캡처하고 그로부터 IBuildInfo 생성하기 위한 유틸리티입니다.
명령옵션 ICommandOptions 구현.
명령옵션Getter 지정된 호출의 명령 옵션 값을 반환하는 서비스 구현입니다.
명령결과 명령의 결과를 포함합니다.
CommandRunner 명령줄 인수에 지정된 명령을 실행한 다음 종료하는 대체 TradeFederation 진입점입니다.
CommandRunner.ExitCode 종료할 수 있는 오류 코드입니다.
명령스케줄러 사용 가능한 모든 장치에서 TradeFederation 명령을 실행하기 위한 스케줄러입니다.
CommandScheduler.HostState 다양한 호스트 상태의 열거형
명령상태 시간 제한 작업의 상태를 나타냅니다.
명령상태 처리기 호출 상태를 모니터링하고 업데이트하는 데 도움이 되는 핸들러입니다.
CommonLogRemoteFileUtil 이 유틸리티를 사용하면 공통 파일의 원격 로그 가져오기 논리에 대해 다양한 원격 장치 표현에서 코드 중복을 방지할 수 있습니다.
CommonLogRemoteFileUtil.KnownLogFileEntry 원격 장치에 대해 알려진 로그 항목의 표현입니다.
동반자 할당자 컴패니언 장치 할당 및 해제를 담당하는 기본 클래스

컴패니언 장치를 할당하는 데 필요한 기준을 설명하려면 getCompanionDeviceSelectionOptions() 구현해야 합니다.

CompanionAwarePreparer 이미 할당된 컴패니언 장치를 가져오는 논리를 캡슐화하는 ITargetPreparer 입니다.
CompanionAwareTest 컴패니언 장치를 가져오고 확인하는 상용구를 캡슐화하는 기본 테스트 클래스

서브클래스는 할당된 컴패니언을 검색하기 위해 getCompanion() 호출할 수 있습니다.

CompanionDeviceTracker 컴패니언 장치를 할당하고 해제하는 클래스
CompanionRunCommandTargetPreparer 할당된 컴패니언 장치에서 지정된 명령을 실행하는 ITargetPreparer
CompanionTestApp설치설정 IDeviceBuildInfo#getTestsDir() 폴더에서 하나 이상의 앱을 할당된 동반 장치에 설치하는 ITargetPreparer 입니다.
CompileBootImageWithSpeedTargetPreparer 컴파일러 필터 'speed'를 사용하여 부팅 클래스 경로와 시스템 서버를 다시 컴파일합니다.
조건실패모니터 호출의 실패를 모니터링합니다.
조건우선순위BlockingQueue <T> 특정 조건과 일치하는 객체를 검색할 수 있는 ERROR(/PriorityBlockingQueue) 같은 작업을 사용하는 스레드로부터 안전한 클래스입니다.
ConditionPriorityBlockingQueue.AlwaysMatch <T> 모든 개체와 일치하는 ConditionPriorityBlockingQueue.IMatcher 입니다.
ConditionPriorityBlockingQueue.IMatcher <T> 요소가 일종의 조건과 일치하는지 확인하기 위한 인터페이스입니다.
구성완성자 TF 구성을 위한 Completer 구현.
구성 가능한GrpcDynamicShardingClient
구성 로드된 구성 개체를 맵에 저장하는 구체적인 IConfiguration 구현입니다.
구성 정의 구성, 관련 개체 및 해당 옵션에 대한 기록을 보유합니다.
구성Def.ConfigObjectDef className에 대한 정보와 그 모양 번호를 담는 개체입니다(예: 구성에 동일한 개체가 두 번 있는 경우 첫 번째 개체가 첫 번째 모양 번호를 갖습니다).
구성 설명자 구성 자체의 일부 측면을 설명하는 구성 개체입니다.
ConfigurationDescriptor.LocalTestRunner 로컬 테스트 실행기를 나타내는 데 사용되는 열거형입니다.
구성예외 구성을 로드할 수 없는 경우 발생합니다.
구성공장 IConfiguration 생성을 위한 팩토리입니다.
구성Factory.ConfigLoader 하나의 루트 구성에서 포함된 구성을 추적하고 순환 포함에 예외를 발생시키는 IConfigDefLoader 구현입니다.
ConfigurationFactory.ExceptionLoader
구성 유틸리티 구성 파일을 처리하는 유틸리티 함수입니다.
ConfigurationXmlParserSettings ConfigurationXmlParser에 대한 설정을 허용하는 간단한 클래스

이 클래스에 설정을 전달하려면 별칭이 필수입니다.

구성YamlParser YAML 스타일 Tradefed 구성을 위한 파서
구성유틸 statsd 구성 파일을 생성하고, 상호 작용하고, 푸시하기 위한 유틸리티 클래스입니다.
ConfigUtil.LogSource
콘솔 사용자에게 상호 작용할 인터페이스를 제공하는 기본 TradeFederation 콘솔

현재 다음과 같은 작업을 지원합니다.

  • 테스트할 명령 추가
  • 장치 및 해당 상태 나열
  • 진행 중인 호출 나열
  • 대기열에 있는 명령 나열
  • 파일/stdout에 호출 로그 덤프
  • 일시 휴업
Console.ArgRunnable <T> 인수를 받을 수 있는 run 메서드가 있는 Runnable
콘솔.캡처목록 List<List<String>> 의 편의 유형
ConsoleReaderOutputStream System.out.print() 가 사용자의 LineReader unfinishedLine과 잘 작동하도록 만드는 데 사용할 수 있는 OutputStream입니다.
콘솔결과보고자 테스트 결과를 콘솔에 인쇄하는 결과 보고자.
콘텐츠분석컨텍스트 콘텐츠를 둘러싼 맥락을 제공하여 콘텐츠를 올바르게 분석하세요.
ContentAnalyticContext.AnalyticMethod 이는 적절한 분석을 위해 콘텐츠 구조에서 기대할 수 있는 사항을 설명합니다.
콘텐츠분석결과 내용분석 요약입니다.
콘텐츠정보 기본 및 현재 버전의 특정 빌드 대상에 대한 콘텐츠를 나타냅니다.
ContentProviderHandler 콘텐츠 제공자 상호작용을 추상화하고 다양한 작업에 장치 측 콘텐츠 제공자를 사용할 수 있게 해주는 핸들러입니다.
테스트결과 리스너 계산 TestStatus 에 의한 총 테스트 수를 추적하는 TestResultListener
CountTestCases수집기 특정 IRemoteTest 에 대한 테스트 사례 수를 계산하고 보고합니다.
적용 범위측정 전달자 빌드 제공자에서 로거로 적용 범위 측정을 전달하는 자리 표시자 테스트입니다.
보장범위옵션 적용 범위 옵션을 보유하는 Tradefed 개체입니다.
CoverageOptions.Toolchain
Cpu조절 대기자 모든 코어의 최대 주파수가 사용 가능한 최고 수준으로 복원될 때까지 기다리는 ITargetPreparer
CreateAvdPreparer
CreateUserPreparer 사용자를 생성하고 마지막에 정리하기 위한 대상 준비자입니다.
현재 호출 호출 내부 어디에서나 유용한 현재 호출 정보를 추적하고 제공하는 클래스입니다.
CurrentInvocation.InvocationInfo 호출을 위해 항상 채울 특별한 명명된 키입니다.
CurrentInvocation.IsolationGrade 격리 수준을 설명합니다.

DebugHostLogOnFailureCollector 테스트 사례 실패가 발생할 때 호스트 측 로그를 수집하고 기록하는 수집기입니다.
기본 연결 장치의 표준 adb 연결로 간주되는 장치의 기본 연결 표현입니다.
DefaultConnection.ConnectionBuilder 빌더는 연결을 설명하는 데 사용되었습니다.
기본RemoteAndroidTestRunner Tradefed 사용 사례에 대한 일부 기본값을 설정하기 위한 ddmlib RemoteAndroidTestRunner 의 확장입니다.
기본테스트Zip설치 프로그램 테스트 zip 설치 프로그램의 기본 구현입니다.
위임된 호출실행 다른 Tradefed 바이너리에 실행을 위임하는 InvocationExecution .
종속성해석기 테스트에 대한 모든 종속성을 가져올 수 있는 새로운 유형의 공급자입니다.
DeviceActionTargetPreparer 장치 작업을 수행하는 ITargetPreparer 입니다.
DeviceActionUtil 장치 작업을 실행하는 유틸리티 클래스입니다.
DeviceActionUtil.Command 장치 작업에 대한 명령입니다.
DeviceActionUtil.DeviceActionConfigError 구성 오류에 대한 예외입니다.
장치 할당 결과 명령에 대한 할당 시도의 결과를 나타냅니다.
장치할당상태 IDeviceManager 관점에서 장치의 할당 상태를 나타냅니다.
DeviceAvailableChecker 모듈이 장치를 오프라인 상태로 두지 않는지 확인하는 검사기입니다.
DeviceBaselineChecker 각 모듈 전에 장치 기준 설정을 지정합니다.
DeviceBaselineSetter 장치 기준 설정을 만드는 데 사용되는 추상 클래스입니다.
DeviceBatteryLevelChecker 최소 배터리 충전량을 확인하고, 최소 충전량이 없으면 배터리가 두 번째 충전 임계값에 도달할 때까지 기다리는 IRemoteTest 입니다.
DeviceBatteryResourceMetricCollector 이 수집기는 장치 배터리 측정항목을 수집합니다.
DeviceBuildDescriptor 장치 플랫폼 빌드 정보를 검색하는 도우미 메서드가 포함된 IBuildInfo 에 대한 래퍼 클래스입니다.
장치빌드정보 전체 Android 기기 빌드 및 해당 테스트(선택 사항)를 나타내는 IBuildInfo 입니다.
DeviceBuildInfoBootStrapper 빌드 정보 필드를 장치에서 읽은 특성으로 바꾸는 ITargetPreparer

이는 외부 소스에서 생성된 빌드로 장치를 테스트하는 데 유용합니다(예:

DeviceBuildInfoInjector DeviceBuildDescriptor 메타데이터를 IBuildInfo 에 삽입하는 ITargetPreparer 입니다.
장치클리너 테스트 후 정리 작업으로 재부팅 또는 포맷을 수행하고 선택적으로 화면을 끕니다.
DeviceCleaner.CleanupAction
DeviceCleaner.PostCleanupAction
DeviceConcurrentUtil 동시 장치 측 명령 실행을 위한 유틸리티 메서드 및 클래스가 포함되어 있습니다.

ERROR(/ExecutorService) 사용하여 ShellCommandCallable 로 구현된 명령을 실행하고, 명령 실행을 위해 ERROR(/ExecutorService) 에서 반환한 ERROR(/Future) 에 대한 동기화를 위해 ERROR(/#joinFuture(String,Future,long)) 사용합니다.

DeviceConcurrentUtil.ShellCommandCallable <V> ITestDevice 에서 쉘 명령 실행의 세부사항을 래핑하는 ERROR(/Callable) .
장치 구성 홀더 로드된 장치 구성 개체를 해당 특성에 저장하는 구체적인 IDeviceConfiguration 구현입니다.
장치 설명자 테스트 중인 장치를 설명하는 정보가 포함된 클래스입니다.
DeviceDisconnectedException 해당 전송 유형을 통해 장치에 더 이상 연결할 수 없을 때 발생합니다(예: USB 또는 TCP/IP 연결을 통해 장치가 더 이상 표시되지 않는 경우).
장치 오류 식별자 장치 오류 및 장치 보고 오류의 오류 식별자입니다.
DeviceFailedToBootError 빌드로 플래시한 후 장치가 부팅되지 않으면 발생합니다.
DeviceFeatureFlag
DeviceFeatureModuleController 특정 기능을 지원하지 않는 경우 테스트를 실행하지 않는 모듈 컨트롤러입니다.
DeviceFileReporter 장치에서 파일을 확인하고 파일이 발견되면 ITestInvocationListener#testLog(String, LogDataType, InputStreamSource) 로 보내는 유틸리티 클래스입니다.
DeviceFlashPreparer 실제 Android 하드웨어에 이미지를 플래시하는 ITargetPreparer 입니다.
DeviceFoldableState 'cmd device_state print-states'에서 반환된 폴더블 기기 상태 표현입니다.
장치폴더빌드정보 로컬 파일 시스템의 디렉터리에 포함된 다른 빌드 아티팩트도 포함하는 IDeviceBuildInfo 입니다.
DeviceImageTracker 일부 증분 장치 업데이트의 경우 차이점을 계산하기 위한 기준 파일이 필요합니다.
DeviceImageTracker.FileCacheTracker 캐시된 장치 이미지 및 해당 메타데이터의 정보를 추적합니다.
DeviceImageZipFlashingTargetPreparer 특정 형식을 통해 제공되는 장치 이미지로 장치를 플래시하는 대상 준비자입니다.
DeviceInternetAccessibilityResourceMetricCollector 수집기는 google.com에 핑을 보내 기기에 인터넷 접속이 가능한지 확인합니다.
DeviceJUnit4ClassRunner IDeviceTest 도 수용하는 JUnit4 테스트 실행기입니다.
DeviceJUnit4ClassRunner.LogAnnotation 기자에게 로그를 전달하기 위한 가짜 주석입니다.
DeviceJUnit4ClassRunner.MetricAnnotation 기자에게 측정항목을 전달하기 위한 가짜 주석입니다.
DeviceJUnit4ClassRunner.TestLogData ExternalResourceTestRule 구현.
DeviceJUnit4ClassRunner.TestMetrics ExternalResourceTestRule 구현.
장치관리Grpc서버 Tradefed에서 기기를 예약할 수 있는 GRPC 서버입니다.
기기 관리자
DeviceManager.FastbootDevice Fastboot 모드의 장치 표현.
장치메트릭데이터 메트릭 수집기가 수집한 모든 데이터를 보관하는 개체입니다.
DeviceMonitor멀티플렉서 여러 IDeviceMonitor 에 요청을 전파하는 프록시 클래스입니다.
DeviceNotAvailableException 장치를 더 이상 테스트할 수 없을 때 발생합니다.
DeviceOwnerTargetPreparer 장치 소유자 구성 요소를 설정하는 ITargetPreparer 입니다.
DeviceParameterizedRunner 호스트 측 구동 매개변수화 테스트를 위한 JUnit4 스타일 매개변수화 실행기입니다.
장치 속성 장치 측 속성 이름에 대한 공통 상수 정의
DeviceRecoveryModeUtil
DeviceReleaseReporter 릴리스될 장치의 상위 프로세스와의 통신을 처리하는 장치 릴리스 보고자입니다.
장치 재설정 기능 장치 재설정의 서버 측 구현입니다.
DeviceResetHandler 일반적으로 장치 재설정을 처리하는 유틸리티입니다.
DeviceRuntime예외 장치 작업으로 인해 예상한 결과가 나오지 않을 때 발생합니다.
장치 선택 옵션 장치 선택 기준에 대한 컨테이너입니다.
DeviceSelectionOptions.DeviceRequestedType 다양한 유형의 자리 표시자 장치가 지원됩니다.
DeviceSettingChecker 모듈 실행 중에 장치 설정이 변경되었는지 확인하세요.
장치 설정 제공된 Option 을 기반으로 테스트할 장치를 구성하는 ITargetPreparer 입니다.
장치스냅샷 기능 장치 스냅샷의 서버 측 구현입니다.
장치스냅샷 처리기 Cuttlefish 스냅샷을 처리하는 유틸리티입니다.
장치상태모니터 IDevice 상태를 모니터링하기 위한 도우미 클래스입니다.
DeviceStorageAgeResourceMetricCollector Logcat에서 저장 기간을 구문 분석합니다.
DeviceStorageFiller 일정량의 여유 공간을 사용할 수 있도록 스토리지를 채우는 대상 준비자입니다.
장치저장상태검사기 장치에 지정된 파티션을 위한 충분한 디스크 공간이 있는지 확인하세요.
DeviceStringPusher 파일에 문자열을 쓰는 대상 준비자입니다.
DeviceSuite 필요한 테스트에 ITestDevice 제공하기 위해 JUnit4 컨테이너 Suite 확장합니다.
DeviceSyncHelper 새 장치 이미지를 장치에 동기화하는 데 도움이 되는 도우미입니다.
DeviceTestCase IRemoteTestIDeviceTest 서비스를 제공하는 도우미 JUnit 테스트 사례입니다.
장치 테스트 결과 DeviceNotAvailableException 이 발생할 때 중단되는 TestResult 의 특수화
DeviceTestResult.RuntimeDeviceNotAvailableException
DeviceTestRun옵션 BaseHostJUnit4Test를 통한 장치 테스트 실행과 관련된 옵션에 대한 빌더 클래스입니다.
DeviceTestSuite IRemoteTestIDeviceTest 서비스를 제공하는 도우미 JUnit 테스트 모음입니다.
DeviceTraceCollector 테스트 실행이 시작될 때 perfetto 추적을 시작하고 마지막에 추적 파일을 기록하는 수집기입니다.
장치를 사용할 수 없음모니터링 이 리스너는 테스트 케이스 수준 DNAE만 캡처하려고 시도합니다.
DeviceUnResponseException 장치가 adb에 표시되지만 응답하지 않음(예: 명령 시간 초과, 부팅되지 않음 등)을 나타내는 DeviceNotAvailableException 의 특수화
DeviceUpdateTargetPreparer 외부 소스(빌드 서비스와 반대)의 장치 이미지 파일로 장치를 업데이트하는 일반적인 단계를 처리하는 추상 ITargetPreparer 입니다.
DeviceWifiResourceMetricCollector 수집기는 현재 연결된 Wi-Fi 신호 강도와 링크 속도 측정항목을 수집합니다.
장치와이퍼 사용자 데이터를 지우는 ITargetPreparer
디렉티드그래프 <V> 방향성 비가중 그래프 구현.
비활성화SELinuxTargetPreparer 활성화된 경우 SELinux를 비활성화하는 대상 준비자입니다.
DryRunKey스토어 키 저장소 값이 항상 적절하게 교체되고 발견되는 테스트 실행용 키 저장소입니다.
드라이러너 테스트를 실제로 실행하는 대신 투명하게 테스트를 실행합니다.
동적파일스텁테스트 이는 tradefed가 동적 파일을 올바르게 해결할 수 있는지 테스트하기 위한 tradefed 테스트입니다.
DynamicRemoteFileResolver 원격 파일에 대한 경로를 확인하는 데 도움이 되는 클래스입니다.
DynamicRemoteFileResolver.FileResolverLoader IRemoteFileResolver 구현을 로드합니다.
DynamicShardHelper 여러 TF 인스턴스 간의 작업 원격 작업 대기열을 허용하는 샤딩 전략
DynamicShardingConnectionInfo메시지 피처 서버를 통해 전송을 더 쉽게 하기 위한 데이터 보유 클래스입니다.
DynamicSystemPreparer 동적 시스템 업데이트를 사용하여 장치 빌드 위에 시스템 이미지를 설정하는 ITargetPreparer 입니다.

이자형

EarlyDeviceRelease기능 초기 장치 출시를 위한 기능 서버 구현입니다.
이메일 이메일을 보내는 도우미 클래스입니다.
이메일HostHealthAgent 호스트 모니터 보고서에서 이메일을 보내는 IHostHealthAgent 구현
EmmaXml상수 emma xml 보고서를 구문 분석할 때 사용되는 상수입니다.
에뮬레이터메모리CpuCapturer
EndCentralDirectory정보 EndCentralDirectoryInfo는 zip 파일의 전체 정보를 포함하는 클래스입니다.
강제SeLinuxChecker Selinux의 상태를 확인하는 상태 검사기입니다.
EraseUserDataPreparer 장치에서 사용자 데이터를 지우는 ITargetPreparer 입니다.
오류식별자 이 인터페이스는 특정 오류와 해당 속성을 설명합니다.
ErrorStorageUtil 공통 저장소에 맞게 오류를 조작하기 위한 도우미 클래스입니다.
이벤트로거리스너 수신한 모든 이벤트를 파일에 기록하는 리스너
예외ThrowingRunnerWrapper
ExecutableBaseTest 실행 가능한 테스트 스타일의 기본 클래스입니다.
실행 가능한 호스트 테스트 호스트에서 실행되는 실행 파일에 대한 테스트 실행기입니다.
ExecutableTargetTest 대상에서 실행되는 실행 파일에 대한 테스트 실행기입니다.
실행파일 테스트를 위해 수행해야 하는 테스트 또는 호출 실행 중에 생성된 파일 종속성입니다.
실행파일.파일키 지도에 대해 알려진 표준 키의 열거입니다.
실행 속성 테스트 또는 호출 실행 중에 생성된 속성입니다.
기존빌드공급자 이미 생성된 IBuildInfo 반환하는 IBuildProvider 입니다.
확장파일 빌드 관련 메타데이터를 전달하는 표준 파일의 확장입니다.
확장AtomsRegistry statsd의 로컬 사용을 위한 ExtensionAtomsRegistry.

에프

실패설명 Trade Federation의 실패 정보를 설명하는 클래스입니다.
가짜 테스트 반복 가능한 테스트 결과를 쉽게 생성하는 것이 목적인 가짜 테스트입니다.
가짜테스트Zip폴더 콘텐츠 목록을 기반으로 압축이 풀린 가짜 테스트 폴더를 생성하는 테스트 장치입니다.
FakeTestsZipFolder.ItemType
FastbootCommandPreparer fastboot를 트리거하고 fastboot 명령을 보내는 대상 준비자입니다.
Fastboot장치성 노출증 실제 Android 하드웨어에 이미지를 플래시하기 위해 fastboot를 사용하는 클래스입니다.
FastbootHelper 빠른 부팅 작업을 위한 도우미 클래스입니다.
FastbootUpdateBootstrapPreparer 지정된 파일(부트로더, 라디오, 장치 이미지 zip)을 IDeviceBuildInfo 에 준비하여 FastbootDeviceFlasher 로 플래시된 장치를 가져온 다음 결과 보고 목적으로 부팅 후 장치 특성을 빌드 정보에 삽입하는 ITargetPreparer 입니다.
치명적인 호스트 오류 TradeFederation을 실행하는 호스트 컴퓨터에서 복구할 수 없는 치명적인 오류가 발생했으며 TradeFederation 인스턴스를 종료해야 함을 나타내는 예외가 발생했습니다.
FeatureFlagTargetPreparer DeviceConfig(원격 서비스에 의해 조정된 기능 플래그)를 업데이트합니다.
파일다운로드캐시 다운로드된 파일의 로컬 파일 시스템 LRU 캐시를 유지 관리하는 도우미 클래스입니다.
파일다운로드캐시공장 FileDownloadCache 생성하기 위한 팩토리
FiledownloadCacheWrapper IFileDownloader 인터페이스를 구현하면서 FileDownloadCache 시설을 제공하는 래퍼 클래스.
FileIdlemonitor 유휴 상태 인 경우 파일을 모니터링하고 콜백을 실행합니다 (예 :
FileInputStreamSource 입력 파일을 취하는 InputStreamSource .
Filelogger 로그 메시지를 파일 및 stdout으로 지시하는 ILeveledLogOutput .
FileProtoresultreporter TestRecord 를 파일에 버린 프로토 리포터.
FilePullerDeveMetricCollector 기기에서 나오는 메트릭 키를 듣고 장치에서 파일로 당기는 BaseDeviceMetricCollector .
FilePullerLogCollector 장치 측에서보고 된 파일의 로거.
FileSystemLogsaver 로그를 파일 시스템에 저장합니다.
fileutil 파일 관련 작업을위한 도우미 클래스
FileUtil.lowdiskSpaceException 사용 가능한 디스크 공간이 최소 임계 값 미만인 경우 던져집니다.
Filtersultforwarder TestDescription 의 허용리스트 만보고 할 수있는 ResultForwarder 의 변형.
FIXEDBYTERRAYOUTPUTSTREAM 최대량의 데이터 만 유지하는 메모리 내 ERROR(/OutputStream) .
플래시 메드 테스트 중 장치 플래시 장치에 사용되는 방법을 설명하기위한 열거
FlashingResourcesParser 장치를 플래시하는 데 필요한 버전의 보조 이미지 파일을 구문 분석하는 클래스.
FlashingResourcesParser.AndroidInfo Map&lt;String, MultiMap&lt;String, String&gt;&gt; .
FlashingResourcesParser.constraint FlashingResourcesParser 그렇지 않으면 사용할 수있는 일부 리소스를 무시할 수 있도록 필터링 인터페이스
FlashingResourceutil 이 유틸리티는 적절한 버전의 아티팩트를 설정하여 DeviceFlashPreparer 통해 플래시 할 수 있습니다.
FoldableExpandingHandler 각각의 비 임시 접이식 구성에 대해 더 많은 내로 확장되는 IModuleParameterHandler .
접이식 처리기 접이식 매개 변수를 사용하여 특수 모듈을 생성 할 수있는 일반 접이식 처리기.
FoldableModePreparer 장치의 접이식 상태를 전환 할 수있는 대상 준비기.
FolderBuildinfo IFolderBuildInfo 의 콘크리트 구현.
폴더 베이비 디렉토리를 장치에서 끌어 내고 압축하여 로깅 백엔드에 저장하는 ITargetPreparer .
형식 GeneratorReporter 특정 형식으로 보고서를 생성 할 수있는 기자.
Freedevicestate
Fuseutil 퓨즈 작업을위한 도우미 클래스.

G

gceavdinfo 주어진 GCE AVD 인스턴스에 대한 관련 데이터를 보유하는 구조.
gceavdinfo.gcestatus
gceavdinfo.logfileentry
gcemanager GCE 호출을 관리하는 도우미는 GCE에서 로그를 시작/중지하고 수집합니다.
gceremotecmdformatter 원격 GCE 장치에 도달하기 위해 명령을 포맷하는 유틸리티 클래스.
gceremotecmdformath.scpmode SCP는 ARGS의 구조에 따라 파일을 밀거나 당기는 데 사용될 수 있습니다.
GCESSHTUNNELLONITOR GCE SSH 터널에 대한 스레드 모니터.
gcovcodecoverAgecollector GCOV 커버리지 측정을 장치에서 가져 와서 테스트 아티팩트로 기록하는 BaseDeviceMetricCollector .
gcovkernelcodecoverAgecollector GCOV 커널 커버리지 측정을 디버그프에서 장치에서 벗어난 다음 테스트 아티팩트로 기록하는 BaseDeviceMetricCollector .
Gcsbucketutil GCS (Google Cloud Storage)에서 파일을 다운로드하고 업로드하려면 파일 관리자.
gcsbucketutil.gcsfilemetadata GCS의 파일 정보를위한 간단한 래퍼.
GCSCOMMON 다운로드 및 업로드와 같은 GCS 작업을위한 기본 클래스.
GCSConfigurationFactory ConfigurationFactory 는 Google Cloud Storage의 구성을로드합니다.
gcsconfigurationfactory.gcsconfigloader GCS에서 구성을로드하고 하나의 루트 구성에서 포함 된 구성을 추적하고 Circular Include에서 예외를 던지는 ConfigurationFactory.ConfigLoader 의 확장자.
gcsconfigurationserver Config Server는 GCS (Google Cloud Storage)에서 구성을로드합니다.
gcsdownloaderHelper 캐싱 및 글로벌 구성을 해결하는 GCS 버킷의 다운로더.
gcsfiledownloader GCS (Google Cloud Storage)에서 파일을 다운로드하려면 파일 다운로더.
gcsfileuploader 파일 업로더는 파일 데이터를 GCS (Google Cloud Storage)에 업로드합니다.
GCSHOSTRESOURCEMANAGER GCS (Google Cloud Storage)에서 호스트 리소스를 다운로드하십시오.
GCSREMOTEFILERESOLVER GCS 버킷에서 다운로드 할 수있는 IRemoteFileResolver 구현.
genericlogcateventparser <logcateventtype> 이벤트에 대한 Logcat 입력을 구문 분석합니다.
genericlogcateventparser.logcatevent 이벤트 유형으로 로그 캣 이벤트를 개최하고 로그 캣 메시지를 트리거하는 구조
GetPreviousPassedHelper 이전에 통과 한 테스트 필터를 얻을 수있는 도우미.
gkideviceflashpreparer 안드로이드 공통 커널 일반 이미지로 장치를 플래시하는 대상 준비기.
GlobalConfiguration 로드 된 구성 객체를지도에 저장하는 IGlobalConfiguration 구현
GlobalFiltergetter 주어진 호출의 필터를 반환하는 서비스 구현.
GlobalTestFilter 호출에 적용되는 필터 옵션.
googleapiclientutil Google API 클라이언트 생성을위한 Utils.
GoogleBenchmarkresultParser Shell에서 실행되는 Google Benchmark의 결과를 구문 분석하고 모든 결과와 함께지도를 반환합니다.
Googlebenchmarktest 주어진 장치에서 Google 벤치 마크 테스트 패키지를 실행하는 테스트.
granularretriabletestwrapper 래퍼 클래스는 IRemoteTest 에서 작동하여 테스트 케이스 레벨에서 iremotetest를 과립합니다.
granularretriabletestwrapper.startendCollector 누락 된 런 시작과 끝을 잡을 수있는 클래스 도우미.
gsideviceflashpreparer Android Generic System 이미지로 장치를 플래시하는 대상 준비 자.
gtest 주어진 장치에서 기본 테스트 패키지를 실행하는 테스트.
gtestbase Gtest의 기본 클래스
gtestlistTestParser "-gtest_list_tests"매개 변수를 사용한 Gtest Dry Run 모드의 결과 파서.
gtestresultparser 쉘에서 실행되는 GTEST를 사용하여 기본 테스트의 '원시 출력 모드'결과를 구문 분석하고 결과를 itestinVocationListener에 알려줍니다.
gtestxmlresultparser 쉘에서 실행되는 GTEST를 사용하여 기본 테스트의 'XML 출력 모드'결과를 구문 분석하고 결과를 ITEStrunListener에게 알려줍니다.

시간

HarnessException 하네스 내에서 예외를위한 기본 예외 클래스.
하네스 리오 외인 파일 문제를 수행하는 데 도움이되는 하네스 예외.
HarnessRuntImeexception
heaphostmonitor 호스트의 힙 메모리를 모니터링하고 이력 로그에 주기적으로 로그인하는 AbstractHostMonitor 구현.
helloworldmultitargetpreparer IMultiTargetPreparer 의 예제 구현.
HistoryLogger TF 히스토리 로거, 특정 이벤트 만 포함하는 특별 로그.
hostgtest 기본 테스트 패키지를 실행하는 테스트.
호스트 metric 이 클래스는보고 할 호스트 메트릭 샘플을 나타냅니다.
Hostoptions 호스트 옵션 보유자 클래스.
HostStatsDmetricCollector STATSD 유틸리티 명령을 사용하여 호스트 측에서 STATSD 메트릭을 수집하는 IMetricCollector .
호스트 테스트 Junit 호스트 기반 테스트의 테스트 러너.
hostutils 호스트 테스트를 실행하는 데 유용한 유틸리티 방법을 구현합니다.
HPROFALLOCSITEPARSER HPROF 보고서의 할당 사이트 섹션에서 정보를 구문 분석하는 도우미 클래스.
httphelper HTTP 요청을위한 도우미 방법이 포함되어 있습니다
httphelper.requestrunnable IRunUtil#runEscalatingTimedRetry(long, long, long, long, IRunnableResult) 와 함께 요청할 수 있습니다.
httpmultipartpost Multipart HTTP Post 요청을위한 도우미 클래스.
httpremotefileresolver http를 통해 원격 파일을 다운로드 할 수있는 IRemoteFileResolver 구현
httpsremotefileresolver https를 통해 원격 파일을 다운로드 할 수있는 IRemoteFileResolver 구현

IABI 테스트중인 ABI를 나타내는 인터페이스.
iabireceiver 테스트 중에 ABI가 필요한 테스트.
Iandroiddebugbridge 이 패키지에 사용 된 AndroidDebugBridge 메소드에 대한 인터페이스 정의.
IAPPBUILDINFO 이 인터페이스는 더 이상 사용되지 않습니다. IBuildInfo 직접 사용하십시오.
iAutoretRiableTest ITestFilterReceiver 구현하지 않지만 여전히 자동 레트로를 지원하려는 IRemoteTest 의 인터페이스.
Ibatteryinfo 장치 배터리와의 상호 작용을 정의하는 인터페이스.
ibatteryinfo.batterystate 현재 배터리 충전 상태를 설명합니다.
Ibuildinfo 테스트 중에 빌드에 대한 정보를 보유합니다.
Ibuildinfo.Buildinfoproperties IBuildInfo 처리해야 할 속성은 일부 특성을 처리해야합니다.
iBuildProvider 테스트중인 빌드에 관한 정보를 제공 할 책임이 있습니다.
iBuildReceiver 테스트 중에 빌드를 참조 해야하는 테스트.
IclusterClient TFC 백엔드와 상호 작용하기위한 인터페이스.
iclusterevent TFC에 업로드 할 클러스터 이벤트에 대한 인터페이스.
iclustereventuploader <t는 iclusterevent >를 확장합니다 ClusterEventUploader의 인터페이스
iclusteroptions 클러스터 관련 옵션을 얻기위한 인터페이스.
icommandoptions 명령 실행 옵션 용 컨테이너.
ICOMMANDSCHEDULER TradeFederation 명령을 실행하기위한 스케줄러.
IcommandScheduler.ischeduledInvocationListener 호출이 완료 될 때 호출 이벤트에 대한 리스너.
icompressionstrategy 런타임에서 선택할 수있는 압축 알고리즘을 나타내는 인터페이스.
iconfigoptionvaluetransformer 구성 옵션 값 조작을위한 인터페이스
iconfigurableVirtualDevice 사전 구성된 가상 장치 정보 (호스트 IP, 호스트 사용자, 포트 오프셋 등)에 대한 정보를 제공하는 인터페이스.
상징적 인 TradeFederation 호출을위한 구성 정보.
IConfigurationFactory IConfiguration 을 만드는 공장
iconfigurationReceiver IConfiguration 수용하는 객체를 나타내는 간단한 인터페이스.
ICONFIGURATIONSERVER 구성 서버의 인터페이스.
icredentialfactory 자격 증명 공장의 인터페이스 OAUTH2 Credential 생성합니다.
idefaultobjectloader YAML 구성의 일부가되어야하는 기본 객체를로드하기위한 인터페이스.
idefaultobjectloader.loaderConfiguration 로드 구성 개체는 정보를 로더로 전달합니다.
IDEVICECTIONRECEIVER 장치 이벤트를 수신하기위한 API를 제공합니다.
idevicebuildinfo 완전한 안드로이드 장치 빌드를 나타내는 IBuildInfo 및 (선택적으로) 테스트.
idevicebuildprovider ITestDevice 의 정보를 사용하여 빌드를 검색하는 IBuildProvider .
ideviceconfiguration 장치 구성 홀더 인터페이스.
ideviceflasher 장치에서 장치 이미지를 플래시합니다.
ideviceflasher.userdataflashoption userData 이미지를 처리하기위한 옵션의 열거
IDEVICEMANAGER 테스트에 사용 가능한 장치 세트를 관리하기위한 인터페이스.
idevicemanager.ifastbootlistener Fastboot 상태가 변경되는 청취자가 변경됩니다.
IDEVICEMENITOR 장치 상태 모니터링을위한 인터페이스.
idevicemonitor.devicelister 알려진 장치와 해당 주를 반환 해야하는 Runnable 클래스.
Idevicerecovery 오프라인 상태가 된 장치를 복구하기위한 인터페이스.
IDEVICESECTION 장치 선택 기준에 대한 인터페이스.
ideviceSection.basedeviceType
IDEVICESTATEMONITOR IDevice 상태를 모니터링하기위한 시설을 제공합니다.
idevicetest ITestDevice 에 대한 참조가 필요한 개체의 인터페이스.
edisableable 비활성화 할 수있는 Tradefed 객체를 설명하는 인터페이스.
Idynamicshardingclient 샤드 클라이언트의 래퍼 인터페이스

이것은 우리가 HTTP 하나를 교체하거나 필요한 경우 하나를 테스트 할 수 있도록 존재합니다.

idynamicshardingconnectionInfo 동적 샤딩 연결 정보가 포함 된 클래스의 인터페이스
아이 메일 이메일 전송을위한 인터페이스.
IEMAIL.MESSAGE 이메일 메시지 데이터 용 컨테이너.
ifiledownloader 원격 파일을 다운로드하기위한 인터페이스.
ifileentry FileEntry 메소드에 더 간단하고 조롱 가능한 계약을 제공하는 인터페이스 정의.
ifileresolverloader IRemoteFileResolver 의 구현을로드합니다.
ifileresolverloader.resolverloadingException 리졸버를로드하거나 초기화 할 수없는 경우 예외가 발생합니다.
iflashingResourcesParser 장치를 플래시하는 데 필요한 보조 이미지 파일의 필요한 버전을 제공하기위한 인터페이스.
iflashingResourcesReSretriever 장치를 플래시하는 데 필요한 보조 이미지 파일 검색을위한 인터페이스.
ifolderbuildinfo 빌드 아티팩트가 로컬 파일 시스템 디렉토리에 포함 된 간단한 추상 IBuildInfo .
iformattergenerator SuiteResultHolder 에 대한 형태를 설명하는 인터페이스.
Iglobalconfiguration 단일 무역 연맹 사례에 대한 글로벌 구성 정보를 포함하는 클래스 (실제 구성의 수많은 호출을 포함).
iharnessexception 하네스 예외에 의해 구현 될 하네스 예외 인터페이스에 대한 설명.
ihostcleaner 테스트 실행이 완료된 후 호스트를 정리합니다.
Ihosthealthagent 호스트 또는 장치 메트릭을 방출하는 인터페이스.
ihostmonitor 호스트 데이터를 발송하는 인터페이스
ihostmonitor.hostdatapoint 데이터 가보고 될 일반 클래스.
IHOSTMONITOR.HOSTMETRICTYPE
ihostoptions 호스트 옵션 홀더 인터페이스.
ihostoptions.permitlimittype 가능한 허가 한도를 설명하는 열거
ihostresourcemanager 관리자 호스트 리소스 인터페이스.
ihttphelper HTTP 요청을 수행하는 도우미 방법.
ihttphelper.datasizeexception
iinvocationContext 필요한 경우 테스트에 액세스 할 수있는 호출에 대한 정보를 보유합니다.
iinvocationContext.TimingEvent
iinvocationcontextreceiver 호출의 맥락을 참조 해야하는 테스트.
iinvocationExecution 인터페이스는 호출의 일부로 수행 될 조치를 설명합니다.
ikeystoreclient 비밀번호 또는 민감한 데이터에 대한 키 저장소에 액세스하는 인터페이스.
ikeystorefactory IKeyStoreClient 만드는 공장.
Ilabpreparer 실험실 준비기를위한 마커 인터페이스

이러한 인터페이스의 의도에 대한 설명은 ITargetPreparer 참조하십시오.

IleveledLogoutput 이 인터페이스를 구현하는 클래스는 로그 메시지를 출력하는 방법을 제공합니다.
Ilogcatreceiver InputStreamSource 로 장치의 LogCat의 출력을 제공하는 클래스.
ilogregistry 다중 로거를 다중화하고 관리하는 ILogOutput 싱글 톤 로거의 인터페이스.
ilogregistry.eventType 기록되는 데 유용한 이벤트
Ilogsaver 이 인터페이스를 구현하는 클래스는 로그를 중앙 위치에 저장하는 방법을 제공합니다.
ilogsaverlistener 로그 파일이 저장 될 때 ITestInvocationListener 가들을 수 있습니다.
imagecontentanalyzer 장치 이미지 컨텐츠 분석을위한 분석기
ImanagedTestDevice 수명주기가 관리되는 ItestDevice.
imanagedTestDevice.DeviceEventResponse IManagedTestDevice#handleAllocationEvent(DeviceEvent) 에 대한 응답 용 컨테이너
imanagedTestDeviceFactory IManagedTestDevice 에 대한 Creator 인터페이스
ImetricCollector 이 인터페이스는 일치하는 메트릭을 수집하기 위해 테스트 결과를보고 할 때 데코레이터로 추가됩니다.
ImetricCollectorReceiver IRemoteTest 에 대한 인터페이스는 테스트 실행에 대한 IMetricCollector 목록을 가져와야하는 경우 구현할 수 있습니다.
imoblyyamlresulthandler Mobly Yaml 결과 처리기의 인터페이스.
imoblyyamlresulthandler.itestresult Mobly Yaml 결과의 인터페이스
Imodulecontroller 모듈을 실행 해야하는지 여부를 제어하기위한 인터페이스.
imodulecontroller.runstrategy 모듈 실행 방법을 설명하는 열거.
ImoduleparameterAndler 스위트 모듈의 매개 변수에 대한 인터페이스.
Imultidevicerecovery 여러 오프라인 장치를 복구하기위한 인터페이스.
imultidevicetest 이 인터페이스는 더 이상 사용되지 않습니다. 이 인터페이스는 호환성을 위해 일시적으로 유지되지만 실제로는 더 이상 사용되지 않습니다. 구현하지 마십시오.
ImultitargetPreparer 여러 장치의 테스트 환경을 함께 준비합니다.
InativedEvice DDMLIB IDevice 에 신뢰할 수 있고 약간 높은 레벨 API를 제공합니다.
IntivedEviceTest INativeDevice 에 대한 참조가 필요한 객체의 인터페이스.
증분 알리지 우틸 증분 이미지 및 장치 업데이트를 활용하는 유틸리티.
인프라 식별기 Trade Federation Infra 및 종속 인프라 (예 : 빌드 인프라)의 오류 식별자.
inputStreamSource 이 인터페이스는 기본적으로 ERROR(/InputStream) 래핑하여 클로닝 가능하게 만듭니다.
installAllTestZipAppSsetUp 모든 앱을 테스트 zip에 설치하는 ITargetPreparer .
installApexModuleTargetPreparer
installApkSetup 파일 시스템에 위치한 하나 이상의 APK를 설치하는 ITargetPreparer .
installBuildenVapkSetup Android 플랫폼 빌드 env에서 하나 이상의 테스트 APK를 설치하는 ITargetPreparer .
installedInstrumentationStest 현재 장치에서 발견 된 모든 계측을 실행합니다.
InstantAppHandler ModuleParameters#INSTANT_APP 용 처리기.
악기가 있습니다 계측을 실행하는 ITargetPreparer
인스트루먼트 테스트 주어진 장치에서 계측 테스트 패키지를 실행하는 테스트.
invocationContext IInvocationContext 의 일반적인 구현.
invocationExecution 모든 호출 단계를 설명하는 클래스 : 빌드 다운로드, target_prep, 실행 테스트, 정리.
invocationLocal <t> 이 클래스는 호출 스코프 변수를 제공합니다.
invocationMetricLogger 일부 메트릭을 기록하기위한 호출을위한 유틸리티 클래스.
invocationMetricLogger.invocationGroupMetricKey 그룹화를 사용하면 동일한 키로 여러 그룹을 기록 할 수 있습니다.
invocationMetricLogger.invocationMetricKey 우리가 항상 호출을 위해 채워질 특별한 명명 된 키.
invocationstatus 호출 상태를 저장하는 클래스.
invocationstatus 호출 상태를 나타내는 도우미 열거
invocationsUmmaryHelper 청취자 세트에 대한 수집 및보고를위한 TestSummary 수업
invocationtojunitresultforwarder ITestInvocationListener 이벤트를 듣고 TestListener 로 전달하는 클래스.
IpostProcessor 포스트 프로세서는 테스트 후 및 결과보고 전에 메트릭 및 로그를 처리 할 수 ​​있도록하는 무역 연맹 대상입니다.
iremotefeature 요청에 따라 실행할 수있는 Tradefed의 기능을 설명하는 인터페이스.
iremotefileresolver 원격 파일을 로컬 파일로 해결할 수있는 객체의 인터페이스.
iremotefileresolver.remotefileresolverargs Args는 Resolvers에게 전달되었습니다
iremotefileresolver.resolvedfile 해결 된 파일 및 일부 메타 데이터에 대한 정보를 보유하고 있습니다.
iremotescheduledlistenersfeature IScheduledInvocationListener 의 통과를 지원하기위한 IRemoteFeature 의 확장.
iremotetest ITestInvocationListener 에 직접 결과를보고하는 테스트.
ireportnotexecuted 불완전한 실행의 경우,이 인터페이스를 구현하는 IRemoteTest 는보고 된 보고서를 위해 비 행사 테스트를보고 할 수 있습니다.
Irescheduler 향후 실행을위한 구성 재조정을위한 인터페이스.
iresourcemetriccollector 사용자가 맞춤형 리소스 수집기를 구현할 수있는 인터페이스.
Irestapihelper REST API 호출을 수행하기위한 도우미 인터페이스.
iresumabletest 이 인터페이스는 더 이상 사용되지 않습니다. 더 이상 필요하지 않습니다
iRetryDecision 인터페이스 레트리 결정을 주도하고 클래스에 필터를 적용하여 더 목표로하는 재 시도.
iruntimehintprovider
Irunutil 시간이 정한 작업 및 시스템 명령을 실행하기위한 인터페이스.
irunutil.envpriority 특정 대상을 설정하는지 또는 설정을 정의하는 열거.
irunutil.irunnableresult 부울 상태를 반환하는 작업을 비동기로 실행하기위한 인터페이스.
Isandbox 인터페이스는 호출을 실행하는 데 사용할 수있는 샌드 박스를 정의합니다.
isandboxfactory ISandbox 만드는 공장.
isetoptionreceiver 이 인터페이스의 구현에는 HostTest#SET_OPTION_NAME 에 링크 된 "set-option"이름이있는 Option 있어야합니다.
Ishardablelistener 샤드를 할 수있는 ITestInvocationListener .
ishardabletest 별도로 실행 가능한 하위 테스트로 분할 될 수있는 IRemoteTest .
Ishardhelper 구성을 위해 채택 할 샤딩 전략을 설명하는 객체의 인터페이스.
분리 된 호스트 테스트 하위 프로세스를 사용하여 주요 프로세스에서 실행하는 대신 낮은 의존성 환경에서 테스트를 실행하는 Tradefed Runner를 구현합니다.
IsupportGranularResults 인터페이스 ITestInvocationListener 가 과립 결과 수신을 지원하는지 여부를 지정합니다.
isystemstatuschecker 시스템 상태에 대한 검사를 수행하고 시스템이 예상 상태인지 표시하기 위해 부울을 반환하는 체커.
isystemstatuscheckerreceiver 구성에서 ISystemStatusChecker 에 대한 액세스가 필요한 IRemoteTest .
ItargetCleaner 이 인터페이스는 더 이상 사용되지 않습니다. 분해는 기본 ItargetPreparer 인터페이스로 이동되었습니다.
ItargetPreparer 테스트 실행을위한 테스트 환경을 준비합니다.
IterribleFailureHandler LogUtil.CLog.wtf(String, Throwable)
itestAnnotationFilterReceiver 주석에 따라 실행하도록 테스트 할 수있는 러너.
itestCollector 테스트 수집 지원을 제공합니다. 설정시 테스트 러너는 실제로 실행하지 않고 테스트 케이스를 수집하기 위해 드라이 런을 수행해야합니다.
itestDevice DDMLIB IDevice 에 신뢰할 수 있고 약간 높은 레벨 API를 제공합니다.
itestdevice.apexinfo 단일 정점에 대한 정보를 저장하는 간단한 구조 클래스
itestDevice.mountPointInfo 단일 마운트 포인트에 대한 정보를 저장하는 간단한 구조 클래스
itestDevice.RecoveryMode
itestFileFilterReceiver 실행 및/또는 실행하지 않는 테스트를 지정하는 파일을받을 수있는 러너.
itestFilterReceiver 실행할 테스트를 필터링 할 수있는 러너.
itestInformationReceiver 일부 클래스에 대한 TestInformation 받는 인터페이스.
itestinvocation 하나의 TradeFederation 테스트 호출을 처리합니다.
itestinvocation.exitinformation 호출에 대한 일부 종료 정보를 나타냅니다.
itestinvocationListener 테스트 호출에서 테스트 결과에 대한 리스너.
ITESTLIFECYCLERECEIVER 계측 테스트 실행 중에 이벤트 알림을받습니다.
ItestLogger 다양한 유형의 데이터 스트림의 로깅을 수행 할 수있는 엔티티.
ItestLoggerReceiver 로깅 목적으로 사용할 수 있도록 ITestLogger 인스턴스를 주입 할 수있는 엔티티.
ItestSpool 우리가 액세스하고 실행할 수있는 테스트 풀을 설명하는 인터페이스
itestsuite 초록 클래스 테스트 스위트를 실행하는 데 사용됩니다.
itestsuite.multidevicemodulestrategy
itestSuiterEsultloader 인터페이스는 헬퍼를 설명하여 이전 결과를 다시 실행할 수있는 방식으로 설명합니다.
ItestSummarylistener ITestInvocationListener 요약을 통해 제한된 정보를 교환 할 수있는 인터페이스.
itestszipinstaller 장치의 테스트 ZIP 파일 (빌드 시스템에서 출력 한)에서 테스트를 설치합니다.
itokenprovider 인터페이스 특정 장치의 토큰을 제공 할 수있는 객체를 설명합니다.
ItokenRequest 인터페이스 IRemoteTest 특별 토큰이있는 장치가 필요하다는 사실을 노출시키기 위해 구현할 수 있습니다.

제이

Jarhosttest 호스트 측 주니트 테스트의 테스트 러너.
jarhosttest.hosttestlistener testRunStarted () 및 testRunedended ()를 제외한 모든 이벤트를 내장 리스너에게 전달하는 래퍼 리스너.
JavacodecoverAgecollector Java 커버리지 측정을 장치에서 가져 와서 테스트 아티팩트로 기록하는 BaseDeviceMetricCollector .
javacodecoverageflusher 장치에서 실행되는 프로세스에서 Java 코드 커버리지 측정을 재설정하고 강요하는 유틸리티 클래스.
jsonfilekeystoreclient 로컬 JSON 파일이 키 스토어를 작용하는 샘플 구현.
JSONFILEKEYSTOREFACTORY JSON 키 스토어 팩토리 구현 JSONFileKeyStoreClient
JSONHTTPTESTRESULTREPORTER 테스트 메트릭 결과 및 브랜치, JSON에 장치 정보를 인코딩하고 HTTP 서비스 엔드 포인트에 게시하는 결과 리포터
junit4resultforwarder Junit4 Runner의 결과 전달자.
Junit4testFilter Filter 확장하여 Junit4 Runner의 필터링을 제공하는 헬퍼 클래스.
Junitrunutil IRemoteTest#run(TestInformation, ITestInvocationListener) 지시하기위한 도우미 클래스 Test#run(TestResult) 호출로 호출.
junittoinvocationresultforwarder TestListener 이벤트를 듣고 ITestInvocationListener 로 전달하는 클래스.
junitxmlparser ANT의 XMLJUnitresultFormatter에 저장된 Junit 결과에서 테스트 결과 데이터를 추출하는 파서는 ItestInvocationListener로 전달합니다.

케이

KerneltAggetTest 커널 테스트의 대상 및 구문 분석 실행 실행 가능에 대한 테스트 러너.
KerneltestModuleController 모듈 컨트롤러가 아키텍처와 일치하지 않을 때 테스트를 실행하지 않도록 기본 클래스.
KeyGuardControllerstate 키 가드 상태를위한 컨테이너.
KeyGuardStatusChecker 모듈 실행 후 키 가드 상태를 확인합니다.
keystoreException 치명적인 키 저장소 오류가 발생하면 던져졌습니다.
KillExistingemulatorPreparer 실행중인 에뮬레이터를 종료하는 ITargetPreparer .
알려진 자료가 있습니다 알려진 실패를 재 시도하는 대상 준비 자.
Ktapresultparser Kunit 테스트 모듈에 의해 생성 된 것으로 KTAP 출력을 읽고 Debugfs 아래의 '결과'파일에 배치됩니다.
KTapResultParser.ParseResolution
KUNITMODULETEST 장치에서 Kunit 테스트 모듈을 실행하기위한 테스트 러너.

labresourcedevicemonitor Labresourceservice 용 GRPC 서버를 초기화/관리하는 실험실 리소스 모니터.
대형 OutputReceiver 장기 실행 명령을 실행하도록 설계된 클래스는 출력을 수집합니다.
LastshardDetector 로컬 샤딩을 실행할 때 때때로 마지막 샤드가 invocationEnded(long) 도달 할 때만 일부 조치를 수행하고 싶습니다.
LANCHCVDHELPER 오징어 VM에서 런치 _cvd를 제어하는 ​​유틸리티 도우미.
누출되었습니다 모듈이 실행 스레드를 누출하지 않도록 상태 검사기.
LegacySubProcessResultSrepsorter 슈퍼 클래스의 변화에도 불구하고 이전 버전의 TF/CTS (예 : 8+)와 호환 될 수있는 하위 프로세스 결과 리포터의 냉동 구현.
ListInstrumentationParser 'PM List Instrumentation'쿼리의 출력을 구문 분석하는 IShellOutputReceiver
ListInstrumentationParser.instrumentationTarget
LocalAndroidvirtualDevice Tradefed 호스트에서 실행되는 로컬 가상 장치의 클래스.
LocalAppBuildProvider 제공된 로컬 경로를 기반으로 IBuildInfo 구성하는 IBuildProvider
지역 개발자 Tradefed를 운영하는 현지 개발자인지 여부를 감지하고 반환합니다.
LocalDeviceBuildProvider 제공된 파일 시스템 디렉토리 경로를 기반으로 IDeviceBuildInfo 구성하는 IBuildProvider .
LocalEmulatorLaunch Android 빌드 환경에서 로컬로 에뮬레이터를 시작하는 TargetPreparer.
LocalEmulatorsnapShot Android 빌드/개발 환경에서 깨끗한 에뮬레이터 스냅 샷을 생성하기위한 TargetPreparer
LocalFileHeader LocalFileHeader는 ZIP 파일 내부에 파일/폴더의 정보가 포함 된 클래스입니다.
LocalFileresolver 로컬 파일을 연결할 수있는 IRemoteFileResolver 구현
LocalFolderBuildProvider 제공된 로컬 경로를 기반으로 IFolderBuildInfo 구성하는 IBuildProvider
localhostresourcemanager 관리자 호스트 리소스.
로컬 풀 로컬 테스트 풀의 구현
LocalRuninStructionBuilder 로컬에서 테스트를 실행하도록 지침을 컴파일하는 유틸리티.
Locksettingsbaselinesetter 화면 잠금 설정을 제거하는 세터.
logcatcrashresultforwarder 특수 청취자 : 실패 (계측 프로세스 충돌)에서 Logcat에서 추락을 추출하려고 시도하여 테스트와 관련된 고장 메시지에 추가합니다.
logcateventparser
logcateventType LogcatEventParser 의 이벤트 유형.
logcatonfailurecollector 테스트 케이스가 실패 할 때 로그 캣을 캡처하고 로그인하는 수집기.
로그 카트리버 백그라운드에서 logcat을 수집하는 클래스.
logcattimingmetriccollector 주어진 regex 패턴을 사용하여 LOGCAT 라인의 이벤트의 시작 및 종료를 통해 하나 또는 다중 반복 테스트 중에 LOGCAT에서 타이밍 정보 (예 : 사용자 스위치 시간)를 수집하는 메트릭 수집기.
logdatatype 로그 데이터의 데이터 유형을 나타냅니다.
로그 파일 저장된 로그 파일의 메타 데이터를 보유하는 클래스.
logfilesaver 로그 데이터를 파일에 저장하는 ITestInvocationListener 의 도우미
Logreceiver
로그 레스트 호출을 만드는 스레드의 ThreadGroup 기반으로 적절한 것을 사용하여 멀티 플렉스를 다른 로거를 사용하고 관리하는 ILogRegistry 구현.
Logsaverresultforwarder 글로벌 파일 세이버로 로그를 저장하기위한 ResultForwarder .
logutil 로깅 유틸리티 클래스.
logutil.clog 로그 태그로 발신자의 간단한 클래스 이름을 자동으로 사용하는 Log 용 Shim 클래스
Luciresultreporter resultdb와 luci에 필요한 테스트 결과를 JSON 형식 (go/result-sink)으로 저장하고 콘솔에 파일 위치를 기록하는 결과 리포터.

MainLineModule Handler InstallApexModuleTargetPreparer를 생성하는 Mainline 모듈의 간단한 핸들러 클래스로 주어진 메인 라인 모듈을 기반으로 동적 링크를 주입하여 해당 모듈을 자동으로 검색합니다.
MainlinetestModuleController 테스트중인 장치의 사전로드 된 메인 라인 모듈을 기반으로 테스트를 실행할 모듈 컨트롤러의 기본 클래스.
ManagedRemotedEvice VM 내부의 Tradefed 인스턴스를 통해 원격으로 관리하는 가상 시스템 내부에서 실행되는 장치.
ManagedTestDeviceFactory TF가 모니터링 할 수있는 다양한 종류의 장치를 만들기위한 공장
MAXSDKMODULECONTROLLER 지정된 SDK 버전 번호 이상의 버전에서 테스트를 실행하지 않도록 모듈 컨트롤러의 기본 클래스.
mergedzipentRyCollection 다운로드 시도를 최소화하기 위해 대형 지퍼 파일의 개별 지퍼 항목을 블록으로 병합하십시오.
MergemultibuildTargetPreparer IMultiTargetPreparer 는 하나의 빌드에서 다른 빌드로 전달할 수 있으며 파일 키를 다른 빌드에 복사 할 수 있습니다.
mergestrategy 여러 시도가있을 때 결과가 어떻게 집계되어야하는지 설명합니다.
MetricFilePostProcessor 테스트 및 실행 레벨 동안 수집 된 메트릭 로그 파일을 업로드하는 데 사용됩니다.
메트릭 콥 테스트 방법에 대한 주석이 @Test 와 주석이 달린 또는 주석이 주석이 주석 목록의 일부인 경우 TestDescription 의 동작 조정, 일부 방법을 필터링하는 데 유용한 추가 매개 변수를 지정할 수 있습니다.
metricsxmlresultreporter metricsxmlresultreporter는 테스트 메트릭을 작성하고 메트릭을 테스트의 호출 단계에서 메트릭스 폴더 매개 변수로 지정된 폴더의 XML 파일로 실행합니다.
metrictestescase Tradefed의 일부로 실행할 때 메트릭을 기록 할 수있는 TestCase 확장.
metrictestcase.logholder 보고 할 로그 파일을 보유하는 구조.
Metricutil 푸시 된 Statsd 구성에서 메트릭을 끌어 내기위한 유틸리티 클래스.
미터법 테스트 메트릭을 저장하고 유사한 테스트에서 메트릭을 집계하고 메트릭을 파일에 작성하는 일반적인 유틸리티 방법이 포함되어 있습니다.
MinapilevelModuleController 지정된 API 수준 아래에서 테스트를 실행하지 않도록 모듈 컨트롤러의 기본 클래스.
minsdkmodulecontroller 지정된 SDK 버전 번호 아래 버전에서 테스트를 실행하지 않도록 모듈 컨트롤러의 기본 클래스.
Miximagezippreparer 장치 빌드에서 시스템 빌드의 이미지를 혼합하는 IMultiTargetPreparer .
MixKerneltAggetPreparer 커널 이미지를 장치 이미지와 혼합 할 수있는 ITargetPreparer .
Moblybinaryhosttest Android 빌드 시스템 (SOONG)에서 Mobly Python 바이너리 파일을 실행하기위한 호스트 테스트
moblyyamlresultcontrollerinfohandler Mobly Yaml 결과 '컨트롤러 정보'요소 처리기.
moblyyamlresultcontrollerinfohandler.controllerinfo
Moblyyamlresultcontrollerinfohandler.controllerinfo.builder
moblyyamlresulthandlerfactory 결과 유형에 따라 적절한 핸들러를 생성하는 Mobly Yaml 결과 처리기 공장.
moblyyamlresulthandlerfactory.invalidresulttypeexception
moblyyamlresulthandlerfactory.type
Moblyyamlresultparser Mobly Yaml 테스트 결과 파서.
Moblyyamlresultrecordhandler Mobly Yaml 결과 '레코드'요소 처리기.
Moblyyamlresultrecordhandler.record
Moblyyamlresultrecordhandler.record.builder
Moblyyamlresultrecordhandler.recordresult
moblyyamlresultsummmaryhandler Mobly Yaml 결과 '요약'요소 처리기.
Moblyyamlresultsummmaryhandler.summary
moblyyamlresultsummmaryhandler.summary.builder
moblyyamlresulttestamelisthandler Mobly Yaml 결과 '테스트 이름 목록'요소 처리기.
moblyyamlresulttestamelisthandler.testnamelist
Moblyyamlresulttestamelisthandler.testnamelist.builder
Moblyyamlresultuserdatahandler Mobly yaml result 'User Data' element handler.
MoblyYamlResultUserDataHandler.UserData
MoblyYamlResultUserDataHandler.UserData.Builder
ModuleDefinition Container for the test run configuration.
ModuleListener Listener attached to each IRemoteTest of each module in order to collect the list of results.
ModuleLogcatCollector Version of logcat collector but for module.
ModuleMerger Helper class for operation related to merging ITestSuite and ModuleDefinition after a split.
ModuleOemTargetPreparer
ModuleParameters Special values associated with the suite "parameter" keys in the metadata of each module.
ModuleParametersHelper Helper to get the IModuleParameterHandler associated with the parameter.
ModulePusher
ModulePusher.ModulePushError Fatal error during Mainline module push.
ModuleSplitter Helper to split a list of modules represented by IConfiguration into a list of execution units represented by ModuleDefinition .
ModuleTestTypeUtil Contains common utility methods for checking module.
MultiFailureDescription Collect multiple FailureDescription in one holder.
MultiMap <K, V> A ERROR(/Map) that supports multiple values per key.

N

NameMangleListener A proxy listener to translate test method, class, and package names as results are reported.
NativeBenchmarkTest A Test that runs a native benchmark test executable on given device.
NativeBenchmarkTestParser A IShellOutputReceiver that parses the benchmark test data output, collecting metrics on average time per operation.
NativeBridgeModuleController A module controller to check if a device support native bridge.
NativeCodeCoverageFlusher A utility class that clears native coverage measurements and forces a flush of native coverage data from processes on the device.
NativeDevice Default implementation of a ITestDevice Non-full stack android devices.
NativeDevice.AdbAction A ERROR(DeviceAction/com.android.tradefed.device.NativeDevice.DeviceAction DeviceAction) for running a OS 'adb ....' command.
NativeDevice.AdbShellAction
NativeDevice.RebootDeviceAction ERROR(DeviceAction/com.android.tradefed.device.NativeDevice.DeviceAction DeviceAction) for rebooting a device.
NativeDevice.RebootMode A mode of a reboot.
NativeDeviceStateMonitor Helper class for monitoring the state of a IDevice with no framework support.
NativeLeakCollector A ITargetPreparer that runs 'dumpsys meminfo --unreachable -a' to identify the unreachable native memory currently held by each process.
NativeStressTest A Test that runs a native stress test executable on given device.
NativeStressTestParser A IShellOutputReceiver that parses the stress test data output, collecting metrics on number of iterations complete and average time per iteration.
NegativeHandler Handler that specify that nothing should be done and the parameter should not create any extra module.
NestedDeviceStateMonitor Device state monitor that executes extra checks on nested device to accommodate the specifics of the virtualized environment.
NestedRemoteDevice Representation of the device running inside a remote Cuttlefish VM.
NetworkNotAvailableException Thrown when a device is not able to connect to network for testing.
NoApkTestSkipper Special preparer that allows to skip an invocation completely (preparation and tests) if there are no apks to tests.
NoDeviceException Thrown when there's no device to execute a given command.
NoisyDryRunTest Run noisy dry run on a command file.
NoOpConfigOptionValueTransformer An no-op IConfigOptionValueTransformer
NotMultiAbiHandler Special handler that notify the SuiteModuleLoader that the secondary abi should not create a module.
NullDevice A placeholder IDevice used by DeviceManager to allocate when IDeviceSelection#nullDeviceRequested() is true

영형

OpenObjectLoader Loader for the default objects available in AOSP.
옵션 Annotates a field as representing a IConfiguration option.
Option.Importance
OptionClass Annotates a class as representing a IConfiguration object.
OptionCopier A helper class that can copy Option field values with same names from one object to another.
OptionDef Holds the details of an Option .
OptionFetcher Helper to get the test options from the parent process.
OptionNotAllowedException Specific ConfigurationException when an option is not allowed to be passed in the command line.
OptionSetter Populates Option fields.
OptionSetter.OptionFieldsForName Container for the list of option fields with given name.
OptionUpdateRule Controls the behavior when an option is specified multiple times.
OtaDeviceBuildInfo A IDeviceBuildInfo used for over-the-air update testing.
OtatoolsBuildInfo An IBuildInfo that contains otatools artifacts.
OtaZipfileBuildProvider Provides a IBuildInfo based on a local OTA zip file.
OxygenClient A class that manages the use of Oxygen client binary to lease or release Oxygen device.
OxygenUtil Utility to interact with Oxygen service.

PackageInfo Container for an application's package info parsed from device.
PackageInstalledModuleController Module controller to not run tests when the device has not got the given packages installed.
Pair <A, B> Define our own Pair class which contains two objects.
PairingMultiTargetPreparer A multi-target preparer helps make Bluetooth pairing (and connection) between two devices.
ParallelDeviceExecutor <V> Wrapper of ERROR(/ExecutorService) to execute a function in parallel.
ParentSandboxInvocationExecution Version of InvocationExecution for the parent invocation special actions when running a sandbox.
ParentShardReplicate Replicate a setup for one device to all other devices that will be part of sharding.
PartialZipDownloadCache Utility to cache partial download files based on their content.
PassingTestFileReporter A ITestInvocationListener that saves the list of passing test cases to a test file
PerfettoGenericPostProcessor A post processor that processes text/binary metric perfetto proto file into key-value pairs by recursively expanding the proto messages and fields with string values until the field with numeric value is encountered.
PerfettoGenericPostProcessor.AlternativeParseFormat
PerfettoGenericPostProcessor.METRIC_FILE_FORMAT
PerfettoPreparer Perfetto preparer pushes the config file in to the device at a standard location to which perfetto have access to.
PerfettoPullerMetricCollector Base implementation of FilePullerDeviceMetricCollector that allows pulling the perfetto files from the device and collect the metrics from it.
PerfettoPullerMetricCollector.METRIC_FILE_FORMAT
PerfettoTraceRecorder A utility class for recording perfetto trace on a ITestDevice .
PrettyPrintDelimiter Helper utility that helps to print delimited message that stands out.
PrettyTestEventLogger Logger matching the events and logging them in order to make it easier to debug.
ProcessInfo Used to store process related(USER, PID, NAME, START TIME IN SECOND SINCE EPOCH) information.
ProfileParameterHandler Base parameter handler for any profile user.
ProfileTargetPreparer Base class for setting up target preparer for any profile user android.os.usertype.profile.XXX .
PropertyChanger A utility class for changing (or adding) items in an Android property file
ProtoResultParser Parser for the Tradefed results proto format.
ProtoResultParser.TestLevel Enumeration representing the current level of the proto being processed.
ProtoResultReporter Result reporter build a TestRecord protobuf with all the results inside.
ProtoUtil Utility methods for dealing with protobuf messages type-agnostically.
ProxyConfiguration Object that allows pointing to a remote configuration to execute.
PsParser Utility used to parse(USER,PID and NAME) from the "ps" command output
PtsBotTest Run PTS-bot tests.
PushFileInvoker This class is deprecated. Use PushFilePreparer instead
PushFilePreparer A ITargetPreparer that attempts to push any number of files from any host path to any device path.
PythonBinaryHostTest Host test meant to run a python binary file from the Android Build system (Soong)

The test runner supports include-filter and exclude-filter.

PythonBinaryHostTest.PythonForwarder Result forwarder to replace the run name by the binary name.
PythonUnitTestResultParser Interprets the output of tests run with Python's unittest framework and translates it into calls on a series of ITestInvocationListener s.
PythonUnitTestRunner This class is deprecated. Use PythonBinaryHostTest instead.
PythonVirtualenvHelper A helper class for activating Python 3 virtual environment.
PythonVirtualenvPreparer Sets up a Python virtualenv on the host and installs packages.

QuotationAwareTokenizer

아르 자형

RebootReasonCollector Collector that collects device reboot during the test run and report them by reason and counts.
RebootTargetPreparer Target preparer that reboots the device.
RecoveryLogPreparer A target preparer used to collect logs before recovery.
RegexTrie <V> The RegexTrie is a trie where each 저장됨 segment of the key is a regex ERROR(/Pattern) .
RemoteAndroidDevice Implementation of a ITestDevice for a full stack android device connected via adb connect.
RemoteAndroidVirtualDevice Extends RemoteAndroidDevice behavior for a full stack android device running in the Google Compute Engine (Gce).
RemoteAvdIDevice A placeholder IDevice used by DeviceManager to allocate when DeviceSelectionOptions.gceDeviceRequested() is true
RemoteDynamicPool Implementation of a pool of remote work queued tests
RemoteFileResolver A simple class that allows one to load files from a variety of places using URIs and the service provider functionality.
RemoteFileUtil Utility class to handle file from a remote instance
RemoteInvocationExecution Implementation of InvocationExecution that drives a remote execution.
RemoteInvocationExecution.FileOptionValueTransformer
RemoteSshUtil Utility to execute ssh commands on remote instances.
RemoteTestTimeOutEnforcer Listeners that allows to check the execution time of a given test config and fail it if it goes over a given timeout.
RemoteZip Utilities to unzip individual files inside a remote zip file.
RemoveSystemAppPreparer A ITargetPreparer for removing an apk from the system partition before a test run.
ReportPassedTests Report in a file possible filters to exclude passed test.
ResolvePartialDownload Resolve a partial download request.
ResourceMetricUtil Utility functions for composing metrics.
ResourceUtil Utility for reading configuration resources.
RestApiHelper A helper class for performing REST API calls.
RestartSystemServerTargetPreparer Target preparer that restarts the system server without rebooting the device.
ResultAggregator Special forwarder that aggregates the results when needed, based on the retry strategy that was taken.
ResultAndLogForwarder Forwarder for results and logs events.
ResultForwarder A ITestInvocationListener that forwards invocation results to a list of other listeners.
ResultsPlayer Special runner that replays the results given to it.
RetentionFileSaver Helper class for creating a .retention file in a directory.
RetryConfigurationFactory Factory that handles retrying a command.
RetryLogSaverResultForwarder Forwarder that also handles passing the current attempt we are at.
RetryPreparationDecision A Class to describe the decisions about whether or not to retry preparation and to fail the module run.
RetryRescheduler A special runner that allows to reschedule a previous run tests that failed or where not executed.
RetryRescheduler.RetryType The types of the tests that can be retried.
RetryResultForwarder An Extension of ResultForwarder that always push to a given attempt number.
RetryResultHelper Helper class to determine which module or test should run or not.
RetryStatistics Structure holding the statistics for a retry session of one IRemoteTest .
RetryStrategy The Retry Strategy to be used when re-running some tests.
RootcanalForwarderPreparer
RootTargetPreparer Target preparer that performs "adb root" or "adb unroot" based on option "force-root".
RunAftersWithInfo
RunBeforesWithInfo
RunCommandTargetPreparer
RunConfigDeviceRecovery Generic base IMultiDeviceRecovery to run a tradefed configuration to do the recovery step.
RunHostCommandTargetPreparer Target preparer to run arbitrary host commands before and after running the test.
RunHostScriptTargetPreparer Target preparer which executes a script before running a test.
RunInterruptedException Thrown when a run operation is interrupted by an external request.
RunNotifierWrapper Wrapper of RunNotifier so we can carry the DeviceNotAvailableException .
RunOnCloneProfileParameterHandler
RunOnCloneProfileTargetPreparer
RunOnSdkSandboxHandler Handler for ModuleParameters#RUN_ON_SDK_SANDBOX .
RunOnSdkSandboxTargetPreparer An ITargetPreparer to marks that tests should run in the sdk sandbox.
RunOnSecondaryUserParameterHandler
RunOnSecondaryUserTargetPreparer An ITargetPreparer that creates a secondary user in setup, and marks that tests should be run in that user.
RunOnSystemUserTargetPreparer An ITargetPreparer that marks that tests should be run on the user (rather than the current user).
RunOnWorkProfileParameterHandler
RunOnWorkProfileTargetPreparer An ITargetPreparer that creates a work profile in setup, and marks that tests should be run in that user.
RuntimeRestartCollector Collector that collects timestamps of runtime restarts (system server crashes) during the test run, if any.
RunUtil A collection of helper methods for executing operations.
RustBenchmarkResultParser Interprets the output of tests run with Criterion benchmarking framework and translates it into calls on a series of ITestInvocationListener s.
RustBinaryHostTest Host test meant to run a rust binary file from the Android Build system (Soong)
RustBinaryTest A Test that runs a rust binary on given device.
RustTestBase Base class of RustBinaryHostTest and RustBinaryTest
RustTestBase.EnvPair
RustTestBase.Invocation
RustTestResultParser Interprets the output of tests run with Rust's unittest framework and translates it into calls on a series of ITestInvocationListener s.

에스

SandboxConfigDump Runner class that creates a IConfiguration based on a command line and dump it to a file.
SandboxConfigDump.DumpCmd
SandboxConfigurationException Special Configuration Exception coming from the Sandbox setup.
SandboxConfigurationFactory Special Configuration factory to handle creation of configurations for Sandboxing purpose.
SandboxConfigUtil A utility class for managing IConfiguration when doing sandboxing.
SandboxedInvocationExecution Special sandbox execution of the invocation: This is the InvocationExection for when we are inside the sandbox running the command.
SandboxInvocationRunner Run the tests associated with the invocation in the sandbox.
SandboxOptions Class that can receive and provide options to a ISandbox .
ScreenshotOnFailureCollector Collector that will capture and log a screenshot when a test case fails.
Sdk28ModuleController A module controller to check if a device is on SDK 28 (Android 9) or above.
Sdk29ModuleController Only run tests if the device under test is SDK version 29 or above.
Sdk30ModuleController Only run tests if the device under test is SDK version 30 or above.
Sdk31ModuleController Only run tests if the device under test is SDK version 31 or above.
Sdk32ModuleController Only run tests if the device under test is SDK version 32 or above.
Sdk33ModuleController Only run tests if the device under test is SDK version 33 or above.
Sdk34ModuleController Only run tests if the device under test is SDK version 34 or above.
SecondaryUserHandler Handler for ModuleParameters#SECONDARY_USER .
SecondaryUserOnDefaultDisplayHandler Handler for ModuleParameters#SECONDARY_USER_ON_DEFAULT_DISPLAY .
SecondaryUserOnSecondaryDisplayHandler Handler for ModuleParameters#SECONDARY_USER_ON_SECONDARY_DISPLAY .
SemaphoreTokenTargetPreparer This is a preparer used to use token to serialize test excution in tradefed host.
SerializationUtil Utility to serialize/deserialize an object that implements ERROR(/Serializable) .
ServiceAccountKeyCredentialFactory A credential factory to create service account key based oauth Credential .
SettingsBaselineSetter A common setter to handle device baseline settings via ITestDevice.setSetting.
ShardBuildCloner Helper class that handles cloning a build info from the command line.
ShardHelper Helper class that handles creating the shards and scheduling them for an invocation.
샤드리스너 호출 샤드(여러 리소스에서 병렬로 실행하기 위한 호출 분할이라고도 함)에서 결과를 수집하고 이를 다른 리스너에게 전달하는 ITestInvocationListener 입니다.
ShardMainResultForwarder A ResultForwarder that combines the results of a sharded test invocations.
ShellOutputReceiverStream Utility subclass of OutputStream that writes into an IShellOutputReceiver.
ShellStatusChecker Check if the shell status is as expected before and after a module run.
ShippingApiLevelModuleController Run tests if the device meets the following conditions:
  • If min-api-level is defined:
    • The device shipped with the min-api-level or later.
ShowmapPullerMetricCollector Base implementation of FilePullerDeviceMetricCollector that allows pulling the showmap files from the device and collect the metrics from it.
SideloadOtaTargetPreparer A target preparer that performs sideload of a specified OTA package, applies the package, waits for device to boot up, and injects the device build properties to use as build info

This target preparer assumes that the device will be in regular adb mode when started, and will ensure that the device exits in the same mode but with the newer build applied.

SimpleFileLogger A ILeveledLogOutput that directs log messages to stdout and to a single log file.
SimplePerfResult Object to hold all simpleperf test results
SimplePerfStatResultParser A utility class to parse simpleperf result.
SimplePerfUtil Utility class to dispatch simple command and collect results
SimplePerfUtil.SimplePerfType Enum of simpleperf command options
SimpleStats A small utility class that calculates a few statistical measures given a numerical dataset.
SizeLimitedOutputStream A thread safe file backed ERROR(/OutputStream) that limits the maximum amount of data that can be written.
SkipHWASanModuleController Base class for a module controller to not run tests on HWASan builds.
SkipManager Based on a variety of criteria the skip manager helps to decide what should be skipped at different levels: invocation, modules and tests.
SkipReason Provide a reason and its metadata for skipping a test.
SkipReason.DemotionTrigger
Sl4aBluetoothUtil A utility class provides Bluetooth operations on one or two devices using SL4A
Sl4aBluetoothUtil.BluetoothAccessLevel Enums for Bluetooth device access level which are based on BluetoothDevice.java
Sl4aBluetoothUtil.BluetoothConnectionState Enums for Bluetooth connection states which are based on BluetoothProfile.java
Sl4aBluetoothUtil.BluetoothPriorityLevel Enums for Bluetooth profile priority level which are based on BluetoothProfile.java
Sl4aBluetoothUtil.BluetoothProfile Enums for Bluetooth profiles which are based on BluetoothProfile.java
Sl4aClient Sl4A client to interact via RPC with SL4A scripting layer.
Sl4aEventDispatcher Event dispatcher polls for event and queue them by name to be queried.
Sl4aEventDispatcher.EventSl4aObject Object returned by the event poller.
SnapshotInputStreamSource A File-backed InputStreamSource.
SparseImageUtil Utility to unsparse sparse images.
SparseImageUtil.SparseInputStream SparseInputStream read from upstream and detects the data format.
StatsdBeforeAfterGaugeMetricPostProcessor A post processor that processes gauge metrics collected in a "before/after" approach, ie
StatsdEventMetricPostProcessor A post processor that processes event metrics in statsd reports into key-value pairs, using the formatters specified on the processor.
StatsdGenericPostProcessor A post processor that processes binary proto statsd reports into key-value pairs by expanding the report as a tree structure.
StatusCheckerResult Contains the result of a ISystemStatusChecker execution.
StatusCheckerResult.CheckStatus
StdoutLogger A ILeveledLogOutput that directs log messages to stdout.
StopServicesSetup A ITargetPreparer that stops services on the device.
StreamProtoReceiver A receiver that translates proto TestRecord received into Tradefed events.
StreamProtoResultReporter An implementation of ProtoResultReporter
StreamUtil Utility class for managing input streams.
StrictShardHelper Sharding strategy to create strict shards that do not report together,
StringEscapeUtils Utility class for escaping strings for specific formats.
StringUtil Utility class for escaping strings for common string manipulation.
StubBuildProvider No-op empty implementation of a IBuildProvider .
StubDevice Stub placeholder implementation of a IDevice .
StubKeyStoreClient Default stub implementation for KeyStore Client.
StubKeyStoreFactory Default stub implementation for KeyStore Factory
StubLocalAndroidVirtualDevice A placeholder IDevice used by DeviceManager to allocate when DeviceSelectionOptions.localVirtualDeviceRequested() is true
StubMultiTargetPreparer Placeholder empty implementation of a IMultiTargetPreparer .
StubTargetPreparer Placeholder empty implementation of a ITargetPreparer .
StubTest No-op empty test implementation.
StubTestRunListener Stub implementation of ITestRunListener
SubprocessCommandException A subprocess command failed to run.
SubprocessConfigBuilder Build a wrapper TF config XML for an existing TF config.
SubprocessEventHelper Helper to serialize/deserialize the events to be passed to the log.
SubprocessEventHelper.BaseTestEventInfo Base Helper for TestIgnored information.
SubprocessEventHelper.FailedTestEventInfo Helper for testFailed information.
SubprocessEventHelper.InvocationEndedEventInfo Helper for invocation ended information.
SubprocessEventHelper.InvocationFailedEventInfo Helper for InvocationFailed information.
SubprocessEventHelper.InvocationStartedEventInfo Helper for invocation started information.
SubprocessEventHelper.LogAssociationEventInfo Helper for logAssociation information.
SubprocessEventHelper.SkippedTestEventInfo
SubprocessEventHelper.TestEndedEventInfo Helper for testEnded information.
SubprocessEventHelper.TestLogEventInfo Helper for testLog information.
SubprocessEventHelper.TestModuleStartedEventInfo Helper for test module started information.
SubprocessEventHelper.TestRunEndedEventInfo Helper for testRunEnded Information.
SubprocessEventHelper.TestRunFailedEventInfo Helper for testRunFailed information
SubprocessEventHelper.TestRunStartedEventInfo Helper for testRunStarted information
SubprocessEventHelper.TestStartedEventInfo Helper for testStarted information
SubprocessExceptionParser Helper to handle the exception output from standard Tradefed command runners.
SubprocessReportingHelper A class to build a wrapper configuration file to use subprocess results reporter for a cluster command.
SubprocessResultsReporter Implements ITestInvocationListener to be specified as a result_reporter and forward from the subprocess the results of tests, test runs, test invocations.
SubprocessTestResultsParser Extends ERROR(/FileOutputStream) to parse the output before writing to the file so we can generate the test events on the launcher side.
SubprocessTestResultsParser.StatusKeys Relevant test status keys.
SubprocessTfLauncher A IRemoteTest for running tests against a separate TF installation.
SuiteApkInstaller Installs specified APKs for Suite configuration: either from $ANDROID_TARGET_OUT_TESTCASES variable or the ROOT_DIR in build info.
SuiteModuleLoader Retrieves Compatibility test module definitions from the repository.
SuiteModuleLoader.ConfigFilter A ERROR(/FilenameFilter) to find all the config files in a directory.
SuiteResultHolder Helper object to ease up serializing and deserializing the invocation results.
SuiteResultReporter Collect test results for an entire suite invocation and output the final results.
SuiteResultReporter.ModulePrepTimes Object holder for the preparation and tear down time of one module.
SuiteTestFilter Represents a filter for including and excluding tests.
SwitchUserTargetPreparer A ITargetPreparer that switches to the specified user kind in setUp.
SystemServerFileDescriptorChecker Checks if system server appears to be running out of FDs.
SystemServerStatusChecker Check if the pid of system_server has changed from before and after a module run.
SystemUpdaterDeviceFlasher A IDeviceFlasher that relies on the system updater to install a system image bundled in a OTA update package.
SystemUtil Utility class for making system calls.
SystemUtil.EnvVariable

TableBuilder Helper class to display a matrix of String elements in a table.
TableFormatter Helper class to display a matrix of String elements so each element column is lined up
TargetFileUtils
TargetFileUtils.FilePermission
TargetSetupError A fatal error occurred while preparing the target for testing.
TarUtil Utility to manipulate a tar file.
TcpDevice A placeholder IDevice used by DeviceManager to allocate when DeviceSelectionOptions.tcpDeviceRequested() is true
TearDownPassThroughPreparer Allows for running tearDown on preparers that are included in a config as an object.
TelephonyHelper A utility to use and get information related to the telephony.
TelephonyHelper.SimCardInformation An information holder for the sim card related information.
TelephonyTokenProvider Token provider for telephony related tokens.
TemperatureThrottlingWaiter An ITargetPreparer that waits until device's temperature gets down to target
TemplateResolutionError Class extending ConfigurationException for template related error during configuration parsing.
TerribleFailureEmailHandler A simple handler class that sends an email to interested people when a WTF (What a Terrible Failure) error occurs within a Trade Federation instance.
TestAppInstallSetup A ITargetPreparer that installs one or more apps from a IDeviceBuildInfo.getTestsDir() folder onto device.
TestContentAnalyzer The analyzer takes context for the analysis and determine what is interesting.
TestContext A class to model a TestContext message of TFC API.
TestDependencyResolver Helper to resolve dependencies if needed.
TestDescription Class representing information about a test case.
TestDescriptionsFile A utility class for marshalling and unmarshalling a list of TestDescriptions to a test file.
TestDevice Implementation of a ITestDevice for a full stack android device
TestDevice.MicrodroidBuilder A builder used to create a Microdroid TestDevice.
TestDeviceOptions Container for ITestDevice Option s
TestDeviceOptions.InstanceType
TestDeviceState A more fully featured representation of device state than DeviceState .
TestEnvironment A class to model a TestEnvironment message returned by TFC API.
TestErrorIdentifier Error identifier from tests and tests runners.
TestFailureListener Listener used to take action such as screenshot, bugreport, logcat collection upon a test failure when requested.
TestFailureModuleController Controller for module that simply want to tune how the tests failures log collected are behaving.
TestFilePushSetup A ITargetPreparer that pushes one or more files/dirs from a IDeviceBuildInfo.getTestsDir() folder onto device.
TestFilterHelper Helper class for filtering tests
TestGroupStatus A class to store status of a test group.
TestInfo Stores the test information set in a TEST_MAPPING file.
TestInformation Holder object that contains all the information and dependencies a test runner or test might need to execute properly.
TestInformation.Builder Builder to create a TestInformation instance.
TestInvocation Default implementation of ITestInvocation .
TestInvocation.RunMode The different mode an invocation can run into.
TestInvocation.Stage
TestInvocationManagementServer GRPC server helping to management test invocation and their lifecycle.
TestInvocationManagementServer.InvocationInformation
TestMapping A class for loading a TEST_MAPPING file.
TestMappingSuiteRunner Implementation of BaseTestSuite to run tests specified by option include-filter, or TEST_MAPPING files from build, as a suite.
TestOption Stores the test option details set in a TEST_MAPPING file.
TestOutputUploader Uploads test output files to local file system, GCS, or an HTTP(S) endpoint.
TestRecordInterpreter Utility to convert a TestRecord proto into a more easily manipulable format in Tradefed.
TestRecordProtoUtil Utility to read the TestRecord proto from a file.
TestResource A class to model a TestResource message returned by TFC API.
TestResourceDownloader A class to download test resource files from file system/GCS/HTTP.
검사 결과 Container for a result of a single test.
TestResultListener A simplification of ITestLifecycleListener for implementers that only care about individual test results.
TestRunnerUtil A utility class to help various test runners.
테스트실행결과 단일 테스트 실행의 결과를 보관합니다.
TestRunToTestInvocationForwarder Forwarder from ddmlib ITestRunListener to ITestLifeCycleReceiver .
TestsPoolPoller Tests wrapper that allow to execute all the tests of a pool of tests.
TestStatus Representation in Tradefed of possible statuses for test methods.
TestSuiteInfo A class that resolves loading of build related metadata for test suite

To properly expose related info, a test suite must include a test-suite-info.properties file in its jar resources

TestSummary A class to represent a test summary.
TestSummary.Type
TestSummary.TypedString
TestSystemAppInstallSetup A ITargetPreparer that installs one or more apps from a IDeviceBuildInfo.getTestsDir() folder onto the /system partition on device.
TestTimeoutEnforcer Listeners that allows to check the execution time of a given test case and fail it if it goes over a given timeout.
TextResultReporter A test result reporter that forwards results to the JUnit text result printer.
TfMetricProtoUtil Utility class to help with the Map to Map 이행.
TfObjectTracker A utility to track the usage of the different Trade Fedederation objects.
TfSuiteRunner Implementation of ITestSuite which will load tests from TF jars res/config/suite/ folder.
TfTestLauncher A IRemoteTest for running unit or functional tests against a separate TF installation.
TimeStatusChecker Status checker to ensure that the device and host time are kept in sync.
TimeUtil Contains time related utility methods.
TimeVal This is a sentinel type which wraps a Long .
시간 낭비 자 A simple target preparer to waste time and potentially restart the device.
TokenProperty Supported token with dynamic sharding.
TokenProviderHelper Helper that gives the provider associated to a particular token, in order to find out if a device supports the token.
TraceCmdCollector A IMetricCollector that collects traces during the test using trace-cmd, and logs them to the invocation.
TracePropagatingExecutorService An executor service that forwards tasks to an underlying implementation while propagating the tracing context.
TracingLogger Class that helps to manage tracing for each test invocation.
TradefedConfigObject A class to model a TradefedConfigObject message of TFC API.
TradefedConfigObject.Type A list of configuration object types which can be injected to a cluster command config.
TradefedDelegator Objects that helps delegating the invocation to another Tradefed binary.
TradefedFeatureClient A grpc client to request feature execution from the server.
TradefedFeatureServer A server that responds to requests for triggering features.
TradefedSandbox Sandbox container that can run a Trade Federation invocation.
TradefedSandboxFactory Default implementation for SandboxFactory
TradefedSandboxRunner Runner associated with a TradefedSandbox that will allow executing the sandbox.
TradefedSandboxRunner.StubScheduledInvocationListener A stub IScheduledInvocationListener that does nothing.

UiAutomatorRunner Runs UI Automator test on device and reports results.
UiAutomatorTest
UiAutomatorTest.LoggingOption
UiAutomatorTest.TestFailureAction
UnexecutedTestReporterThread Threads that takes care of reporting all unexecuted tests.
UniqueMultiMap <K, V> A MultiMap that ensures unique values for each key.
UsbResetMultiDeviceRecovery A IMultiDeviceRecovery which resets USB buses for offline devices.
UsbResetRunConfigRecovery Allow to trigger a command to reset the USB of a device
UsbResetTest An IRemoteTest that reset the device USB and checks whether the device comes back online afterwards.
UserChecker Checks if users have changed during the test.
UserCleaner A ITargetPreparer that removes secondary users on teardown.
UserHelper
사용자 정보 Similar to UserInfo class from platform.
UserInfo.UserType Supported variants of a user's type in external APIs.

V

ValidateSuiteConfigHelper This class will help validating that the IConfiguration loaded for the suite are meeting the expected requirements: - No Build providers - No Result reporters
VersionedFile Data structure representing a file that has an associated version.
VersionParser Fetch the version of the running tradefed artifacts.
VisibleBackgroundUserPreparer Target preparer for running tests in a user that is started in the visible in the background.
VmRemoteDevice A Remote virtual device that we will manage from inside the Virtual Machine.

WaitDeviceRecovery A simple implementation of a IDeviceRecovery that waits for device to be online and respond to simple commands.
WaitForDeviceDatetimePreparer A ITargetPreparer that waits for datetime to be set on device

Optionally this preparer can force a TargetSetupError if datetime is not set within timeout, or force host datetime onto device,

WifiCommandUtil A utility class that can parse wifi command outputs.
WifiCommandUtil.ScanResult Represents a wifi network containing its related info.
WifiHelper Helper class for manipulating wifi services on device.
WifiPreparer A ITargetPreparer that configures wifi on the device if necessary.

엑스

XmlFormattedGeneratorReporter Implementation of the FormattedGeneratorReporter which format the suite results in an xml format.
XmlResultReporter Writes JUnit results to an XML files in a format consistent with Ant's XMLJUnitResultFormatter.
XmlSuiteResultFormatter Utility class to save a suite run as an XML.
XmlSuiteResultFormatter.RunHistory Helper object for JSON conversion.

와이

YamlClassOptionsParser Helper to parse test runner information from the YAML Tradefed Configuration.

ZipCompressionStrategy An ICompressionStrategy for creating zip archives.
ZipUtil A helper class for compression-related operations
ZipUtil2 A helper class for zip extraction that takes POSIX file permissions into account