클래스 인덱스

이들은 API 클래스입니다. 모든 API 패키지를 참조하십시오.

AaptParser 'aapt dump badging' 출력을 파싱하여 apk에서 정보를 추출하는 클래스입니다.
AaptParser.AaptVersion APK 파일을 구문 분석하는 데 사용되는 AAPT 버전에 대한 옵션의 열거형입니다.
아비 ABI를 나타내는 클래스입니다.
AbiFormatter abi의 유틸리티 클래스입니다.
AbiUtils 장치 ABI를 처리하기 위한 유틸리티 클래스
추상 연결 추상 연결 표현.
추상 호스트 모니터 호스트 상태 모니터링의 일반적인 클래스입니다.
AbstractXml파서 xml 파일 구문 분석을 위한 도우미 기본 클래스
AbstractXmlParser.ParseException XML 입력을 구문 분석할 수 없는 경우 발생합니다.
AcloudConfigParser Acloud 구성을 구문 분석하는 도우미 클래스(클라우드 장치 인스턴스를 시작하는 데 사용됨).
AcloudConfigParser.AcloudKeys 구성에서 검색할 수 있는 키 세트입니다.
작업 진행 중 일반 작업이 진행 중입니다.
액티브 트레이스 활성 추적을 설명하고 관리하는 데 도움이 되는 기본 클래스입니다.
활동 상태 검사기 모듈 끝에서 실행 중인 나머지 활동에 대한 상태 검사기.
AdbRoot엘리베이터 필요한 경우 구성될 때 adb 루트를 활성화하고 완료되면 루트 상태를 복원하는 AutoCloseable 입니다.
AdbSsh연결 SSH 브리지를 통한 ADB 연결.
AdbStopServerPreparer adb 테스트 실행 전후에 호스트에서 adb 서버를 중지하는 대상 준비자.
AdbTcp연결 장치의 표준 adb 연결로 간주되는 장치의 기본 연결 표현입니다.
AdbUtils adb 작업을 위한 유틸리티 클래스입니다.
AfterClassWithInfo AfterClass 와 유사한 보장이지만 주석이 달린 메서드에는 TestInformation 매개변수가 필요합니다.
AggregatePostProcessor 다중 반복 테스트 실행 중에 수집된 숫자 메트릭에 대한 최소, 최대, 평균, 분산, 표준 편차, 총계, 개수 및 백분위수(선택 사항)를 제공하여 두 배로 취급하는 메트릭 집계기입니다.
AllTestAppsInstallSetup IDeviceBuildInfo#getTestsDir() 폴더의 모든 앱을 장치에 설치하는 ITargetPreparer .
AltDir행동 다양한 테스트 아티팩트 설치 프로그램/푸셔에 대한 대체 디렉토리 동작을 정의하는 열거형

AndroidJUnitTest android.support.test.runner.AndroidJUnitRunner를 사용하여 지정된 기기에서 계측 테스트 패키지를 실행하는 테스트입니다.
AoaTargetPreparer AOAv2(Android Open Accessory) 프로토콜을 사용하여 일련의 작업(예: 클릭 및 스와이프)을 실행하는 ITargetPreparer .
AppBuildInfo Android 애플리케이션 및 해당 테스트 패키지를 나타내는 IBuildInfo .
AppDeviceBuildInfo 이 클래스는 더 이상 사용되지 않습니다. IDeviceBuildInfo 직접 사용하십시오.
AppSetup apk 및 해당 테스트를 설치하는 ITargetPreparer 입니다.
AppVersionFetcher 장치에서 앱 버전 문자열을 가져오는 유틸리티 클래스입니다.
AppVersionFetcher.AppVersionInfo 앱 버전 정보 유형.
ArchModuleController 지정된 아키텍처와 일치하지 않는 경우 테스트를 실행하지 않는 모듈 컨트롤러.
ArgsOptionParser 구문 분석된 명령줄 인수에서 Option 필드를 채웁니다.
어레이유틸 어레이의 유틸리티 메서드
ArtChroot준비자 ART 테스트를 위한 chroot 디렉터리를 만듭니다.
ArtGTest
ArtRunTest ART 실행 테스트를 실행하는 테스트 러너입니다.
ArtRunTest.AdbShellCommandException ADB 셸 명령 실행 중에 발생한 오류를 보고하는 예외 클래스입니다.
ATestFileSystemLogSaver 이 LogSaver 클래스는 ATest에서 특정 경로에 로그를 저장하는 데 사용됩니다.
AtestRunner ITestSuite 구현
AtraceCollector 테스트 중에 atrace를 실행하고 결과를 수집하고 호출에 기록하는 IMetricCollector 입니다.
AtraceRunMetricCollector 테스트 장치에서 지정된 디렉토리 아래의 모든 테스트 디렉토리에서 추적을 수집하고 테스트 디렉토리를 기록하고 테스트 디렉토리 아래의 추적 파일을 사후 처리하고 메트릭을 집계합니다.
AutoLogCollector 하네스에서 자동으로 처리할 수 있는 수집기를 설명하는 열거형입니다.
자동화된 보고자 Tradefed 자동 보고자의 매핑을 정의하는 클래스입니다.
AveragePostProcessor 메트릭 목록의 평균을 계산하는 포스트 프로세서 구현.

배경장치작업 작업이 취소될 때까지 필요에 따라 지정된 장치에서 반복되는 명령을 실행합니다.
BaseDeviceMetricCollector onTestRunStart(com.android.tradefed.device.metric.DeviceMetricData)ERROR(/#onTestRunEnd(com.android.tradefed.device.metric.DeviceMetricData,Map)) 에서 수집을 시작하고 중지할 수 있는 IMetricCollector 의 기본 구현입니다.
BaseEmulatorPreparer 로컬 에뮬레이터를 시작하기 위한 일반 준비자입니다.
BaseHostJUnit4Test 호스트 JUnit4 스타일 테스트를 실행하기 위한 기본 테스트 클래스입니다.
BaseLeveledLogOutput 이름 또는 구성 요소를 기반으로 일부 태그를 필터링할 수 있는 ILeveledLogOutput 의 기본 구현입니다.
BaseModuleController 모듈 실행 여부를 확인하기 위해 구현해야 하는 IModuleController 의 기본 구현입니다.
BaseMultiTargetPreparer 개체를 비활성화할 수 있는 IMultiTargetPreparer 의 기본 구현입니다.
베이스 포스트 프로세서 모든 구현이 확장해야 하는 기본 IPostProcessor 입니다.
BaseRetryDecision IRetryDecision 의 기본 구현입니다.
BaseStreamLogger <OS는 OutputStream을 확장> 로그 메시지를 출력 스트림과 stdout으로 보내는 ILeveledLogOutput .
BaseTargetPreparer 개체의 비활성화 여부를 제어할 수 있는 ITargetPreparer 의 기본 구현 클래스입니다.
BaseTestSuite 새로운 제품군 시스템으로 호환성 테스트 제품군을 실행하기 위한 테스트입니다.
배터리 컨트롤러 장치의 배터리 충전 상태를 제어할 수 있는 유틸리티 클래스입니다.
배터리재충전장치복구 장치의 배터리 수준이 지정된 임계값 아래로 떨어질 때 명령을 트리거하도록 허용합니다.
배터리 온도
배터리사용불가장치복구 배터리 수준을 사용할 수 없는 경우 구성을 트리거하는 복구 검사기입니다.
BeforeClassWithInfo BeforeClass 와 유사한 보장이지만 주석이 달린 메서드에는 TestInformation 매개변수가 필요합니다.
바이너리 상태 IGNORE no-op 상태로 ON/OFF 상태를 기록하는 데 사용되는 열거형입니다.
BluetoothConnectionLatencyCollector 수집기는 미리 정의된 statsd 기간 메트릭 구성을 장치에 푸시하고 각 프로필에 대한 Bluetooth 연결 기간을 수집합니다.
BluetoothConnectionStateCollector 이 수집기는 BluetoothConnectionStateChanged 메트릭을 수집하고 각 프로필에 대한 연결 상태 번호를 기록합니다.
BluetoothConnectionSuccessRatePostProcessor 블루투스 프로필의 성공률을 계산하는 포스트 프로세서 구현

"metric-key-match"를 사용하여 숫자 배열 예 [0, 1, 2, 3, 0, 1, 2, 3]에 블루투스 연결 상태를 포함하는 메트릭을 지정합니다.

BluetoothHciSnoopLogCollector DUT에서 Bluetooth HCI 스눕 로깅을 활성화하고 각 테스트에 대한 로그를 수집하는 수집기.
BluetoothUtils 장치에서 BluetoothInstrumentation을 호출하기 위한 유틸리티 기능

기기 측 Bluetooth 계측 코드는 AOSP frameworks/base/core/tests/bluetoothtests 에서 찾을 수 있습니다.

BootstrapBuildProvider 테스트 장치에서 빌드 정보를 부트스트랩하는 IDeviceBuildProvider

이것은 일반적으로 외부에서 제공되는 빌드가 있는 장치에 사용됩니다.

BootstrapServiceFileResolverLoader 서비스 로딩 기능을 사용하여 확인자를 로드합니다.
버그 리포트 플랫 버그 보고서 및 압축된 버그 보고서(bugreportz)와 호환되는 버그 보고서 파일 참조를 포함하는 개체입니다.
BugreportCollector 구성 가능한 이벤트가 발생할 때 버그 보고서를 수집한 다음 각 버그 보고서가 수집된 후 하위에서 ITestInvocationListener#testLog 호출하는 통과 ITestInvocationListener 입니다.
BugreportCollector.Filter
BugreportCollector.Freq
BugreportCollector.명사
BugreportCollector.Predicate 버그 보고서를 캡처할 시기를 설명하는 전체 조건자입니다.
BugreportCollector.Relation
BugreportCollector.SubPredicate
BugreportzOnFailureCollector 테스트 사례가 실패하면 bugreportz를 수집합니다.
BugreportzOnTestCaseFailureCollector 실행의 테스트 사례가 실패하면 bugreportz를 수집합니다.
빌드오류 제공된 빌드가 실행되지 않으면 발생합니다.
빌드 정보 ITestDevice 와 연결되어야 하는 IBuildInfo 의 일반 구현입니다.
빌드 정보 키 빌드 정보 쿼리와 관련된 클래스 보유 열거형입니다.
BuildInfoKey.BuildInfoFileKey IBuildInfo.getFile(com.android.tradefed.build.BuildInfoKey.BuildInfoFileKey) 통해 쿼리할 수 있는 알려진 모든 파일 형식을 설명하는 열거형입니다.
빌드 정보 레코더 빌드 정보 메타 데이터를 지정된 파일에 쓰는 ITargetPreparer 입니다.
BuildInfoUtil IBuildInfo 조작을 돕는 util 클래스
빌드 검색 오류 테스트를 위해 빌드를 검색하는 동안 치명적인 오류가 발생했습니다.
BuildSerializedVersion 모든 IBuildInfo 의 현재 직렬화 버전을 포함하는 클래스입니다.
BuildTestsZipUtils Android 빌드 시스템에서 생성된 테스트 zip과 관련된 작업을 위한 도우미 클래스
대량 이메일 다음 구성을 허용하는 이메일 발신자 유틸리티: 전송 간격, 초기 버스트 크기, 수신자 및 총 메시지 수.
BundletoolUtil bundletool 명령줄을 사용하여 장치에 .apks를 설치하는 유틸리티 클래스입니다.
ByteArrayInputStreamSource
바이트 배열 목록 경량 바이트 배열을 나타내는 클래스입니다.
바이트 배열 유틸리티 바이트 배열에서 작동하는 유틸리티(예: 바이트를 정수로 변환).

자동차 모듈 컨트롤러 이 컨트롤러는 자동차가 아닌 장치에서 테스트 케이스 실행을 방지합니다.
CarryDnaeError JUnit4 프레임워크를 통해 DeviceNotAvailableException 전달하는 내부 RuntimeException .
CarryInterruptedException 테스트 단계 제한 시간이 트리거되고 InterruptedException이 테스트 실행 스레드에서 호출 실행 스레드로 전달되어야 하는 경우 발생합니다.
Cdma장치점멸 장치 CDMA 라디오를 사용하여 실제 Android 기기에서 이미지를 플래시하는 클래스입니다.
CecControllerTokenProvider CEC(Consumer Electronics Control) 관련 토큰에 대한 토큰 공급자입니다.
CentralDirectoryInfo CentralDirectoryInfo는 zip 파일 내부의 파일/폴더 정보를 포함하는 클래스입니다.
CheckPairingPreparer 기본 장치와 컴패니언 장치 간의 BT 본딩을 확인하는 CompanionAwarePreparer
CircularAtrace유틸 Monkey 테스트 중 ANR의 근본 원인을 식별하기 위해 주로 개발된 atrace 유틸리티입니다.
CircularByteArray 순환 버퍼로 작동하고 배열에 있는 모든 값의 총합을 추적하는 고정 크기 배열을 유지하기 위한 데이터 구조입니다.
ClangCodeCoverage수집기 장치에서 Clang 커버리지 측정을 가져와 테스트 아티팩트로 기록하는 BaseDeviceMetricCollector 입니다.
ClassNotFoundConfigurationException 개체의 클래스를 찾을 수 없는 경우에 대한 ConfigurationException .
클래스패스스캐너 클래스 경로에서 항목을 찾습니다.
ClassPathScanner.ClassNameFilter Java 클래스 이름을 필터링하고 변환하는 IClassPathFilter 입니다.
ClassPathScanner.ExternalClassNameFilter 내부 클래스를 거부하는 ClassNameFilter
ClassPathScanner.IClassPathFilter 클래스 경로 진입 경로에 대한 필터

FileFilter 이후에 패턴화됨

ClockworkUtils 다중 장치 로직 공유를 위한 시계 장치 유틸리티
CloseableTraceScope try-with-resources를 통해 추적 섹션을 보고할 수 있는 범위가 지정된 클래스
ClusterBuildInfo TFC에서 파이프된 빌드를 위한 IBuildInfo 클래스입니다.
ClusterBuildProvider TFC 테스트 리소스를 다운로드하기 위한 IBuildProvider .
클러스터클라이언트 TFC 백엔드와 상호 작용하기 위한 IClusterClient 구현.
클러스터 명령 TF 클러스터에서 가져온 작업을 나타내는 클래스입니다.
ClusterCommand.RequestType
ClusterCommand.State TF 클러스터에서 명령의 상태입니다.
ClusterCommandConfigBuilder 클러스터 명령에 대한 구성 파일을 빌드하는 클래스입니다.
ClusterCommandEvent 업로드할 클러스터 명령 이벤트를 캡슐화하는 클래스입니다.
ClusterCommandEvent.빌더
ClusterCommandEvent.Type
ClusterCommandLauncher 하위 프로세스 TF를 통해 TFC에서 명령을 실행하는 IRemoteTest 클래스.
ClusterCommandScheduler TFC(Tradefed Cluster)를 지원하는 ICommandScheduler .
클러스터 명령 상태 TF 클러스터의 명령에 대한 상태 및 취소 이유를 나타내는 클래스입니다.
클러스터 장치 정보 업로드할 클러스터 장치 정보를 캡슐화하는 클래스입니다.
ClusterDeviceInfo.빌더
ClusterDeviceMonitor Tradefed 클러스터 서비스에 결과를 보고하는 IDeviceMonitor 구현입니다.
ClusterEventUploader <T 확장 IClusterEvent > IClusterEvent TFC에 업로드하는 ClusterEventUploader 클래스.
클러스터 호스트 이벤트 업로드할 클러스터 호스트 이벤트를 캡슐화하는 클래스입니다.
ClusterHostEvent.빌더
ClusterHostEvent.HostEventType 다양한 호스트 이벤트 유형의 열거형입니다.
ClusterHostUtil 전역 구성 인스턴스, 호스트 정보 등을 가져오는 TF 클러스터용 정적 유틸리티 함수
ClusterLogSaver TFC에 테스트 출력을 업로드하기 위한 ILogSaver 클래스.
ClusterLogSaver.FilePickingStrategy 파일 선택 전략.
클러스터 옵션
CodeCoverageTest 지정된 장치에서 계측 테스트 패키지를 실행하고 코드 검사 보고서를 생성하는 테스트입니다.
CollectingByteOutputReceiver 전체 셸 출력을 byte[] 로 수집하는 IShellOutputReceiver 입니다.
수집출력수신기 전체 쉘 출력을 하나의 String 으로 수집하는 IShellOutputReceiver 입니다.
수집 테스트 리스너 모든 테스트 결과를 수집할 ITestInvocationListener 입니다.
CollectorHelper 여러 위치에서 필요한 일부 IMetricCollector 작업을 수행하는 도우미입니다.
CommandFileParser 명령줄 세트를 포함하는 파일의 파서입니다.
CommandFileParser.CommandLine
명령 인터럽터 TradeFederation 명령을 중단하거나 중단할 수 없는 것으로 표시할 수 있는 서비스입니다.
CommandLineBuildInfoBuilder 명령줄에서 일반적인 빌드 정보 인수를 캡처하고 여기에서 IBuildInfo 만드는 유틸리티입니다.
명령 옵션 ICommandOptions 구현.
CommandOptionsGetter 지정된 호출의 명령 옵션 값을 반환하는 서비스 구현입니다.
명령 결과 명령의 결과를 포함합니다.
커맨드러너 명령줄 인수에 지정된 명령을 실행한 다음 종료하는 대체 TradeFederation 진입점입니다.
CommandRunner.ExitCode 종료할 수 있는 오류 코드입니다.
명령 스케줄러 사용 가능한 모든 장치에서 TradeFederation 명령을 실행하기 위한 스케줄러.
CommandScheduler.HostState 호스트 상태가 다른 열거형
명령 상태 시간 초과 작업의 상태를 나타냅니다.
CommandStatusHandler 호출 상태를 모니터링하고 업데이트하는 데 도움이 되는 핸들러입니다.
CommonLogRemoteFileUtil 이 유틸리티를 사용하면 공통 파일의 논리를 가져오는 원격 로그에 대해 서로 다른 원격 장치 표현에서 코드 중복을 방지할 수 있습니다.
CommonLogRemoteFileUtil.KnownLogFileEntry 원격 장치에 대한 알려진 로그 항목의 표현입니다.
CompanionAllocator 컴패니언 장치 할당 및 해제를 처리하는 기본 클래스

getCompanionDeviceSelectionOptions() 도우미 장치를 할당하는 데 필요한 기준을 설명하기 위해 구현되어야 합니다.

CompanionAwarePreparer 이미 할당된 동반 장치를 가져오는 논리를 캡슐화하는 ITargetPreparer 입니다.
CompanionAwareTest 컴패니언 장치 가져오기 및 확인의 상용구를 캡슐화하는 기본 테스트 클래스

서브클래스는 getCompanion() 호출하여 할당된 컴패니언을 검색할 수 있습니다.

CompanionDeviceTracker 컴패니언 장치를 할당하고 해제하는 클래스
CompanionRunCommandTargetPreparer 할당된 컴패니언 장치에서 지정된 명령을 실행하는 ITargetPreparer
CompanionTestAppInstallSetup IDeviceBuildInfo#getTestsDir() 폴더에서 할당된 컴패니언 장치에 하나 이상의 앱을 설치하는 ITargetPreparer 입니다.
CompileBootImageWithSpeedTargetPreparer 컴파일러 필터 'speed'를 사용하여 부트 클래스 경로 및 시스템 서버를 다시 컴파일합니다.
상태실패모니터 호출의 실패를 모니터링합니다.
ConditionPriorityBlockingQueue <T> 특정 조건과 일치하는 개체를 검색할 수 있는 ERROR(/PriorityBlockingQueue) 유사 작업이 있는 스레드로부터 안전한 클래스입니다.
ConditionPriorityBlockingQueue.AlwaysMatch <T> 모든 개체와 일치하는 ConditionPriorityBlockingQueue.IMatcher 입니다.
ConditionPriorityBlockingQueue.IMatcher <T> 요소가 일종의 조건과 일치하는지 확인하기 위한 인터페이스입니다.
구성 완료자 TF 구성을 위한 Completer 구현.
구성 로드된 구성 개체를 맵에 저장하는 구체적인 IConfiguration 구현입니다.
구성 정의 구성, 관련 개체 및 해당 옵션에 대한 기록을 보유합니다.
ConfigurationDef.ConfigObjectDef className에 대한 정보와 그것이 가진 모양 번호를 담을 개체(예: 구성에 동일한 개체가 두 번 있는 경우 첫 번째 항목이 첫 번째 모양 번호를 가집니다).
구성 설명자 구성 자체의 일부 측면을 설명하는 구성 개체입니다.
ConfigurationDescriptor.LocalTestRunner 로컬 테스트 실행기를 나타내는 데 사용되는 열거형입니다.
구성 예외 구성을 로드할 수 없는 경우 발생합니다.
구성 공장 IConfiguration 생성을 위한 팩터리입니다.
ConfigurationFactory.ConfigLoader 하나의 루트 구성에서 포함된 구성을 추적하고 순환 포함에서 예외를 발생시키는 IConfigDefLoader의 구현입니다.
ConfigurationFactory.ExceptionLoader
구성유틸 구성 파일을 처리하는 유틸리티 기능.
ConfigurationXmlParserSettings ConfigurationXmlParser에 대한 설정을 수락하는 간단한 클래스

이 클래스에 설정을 전달하려면 별칭이 필수입니다.

구성YamlParser YAML 스타일 Tradefed 구성용 파서
구성 유틸리티 statsd 구성 파일 생성, 상호 작용 및 푸시를 위한 유틸리티 클래스입니다.
ConfigUtil.LogSource
콘솔 사용자에게 상호 작용할 수 있는 인터페이스를 제공하는 기본 TradeFederation 콘솔

현재 다음과 같은 작업을 지원합니다.

  • 테스트할 명령 추가
  • 장치 및 해당 상태 나열
  • 진행 중인 호출 나열
  • 대기열의 명령 나열
  • file/stdout에 호출 로그 덤프
  • 일시 휴업
콘솔.ArgRunnable <T> 인수를 취할 수 있는 run 메서드가 있는 Runnable
콘솔.CaptureList List<List<String>> 의 편리한 유형
ConsoleReaderOutputStream System.out.print() 가 사용자의 LineReader unfinishedLine과 잘 작동하도록 만드는 데 사용할 수 있는 OutputStream입니다.
ConsoleResultReporter 테스트 결과를 콘솔에 출력하는 결과 보고자.
ContentProviderHandler 콘텐츠 제공자 상호 작용을 추상화하고 다양한 작업에 대해 장치 측 콘텐츠 제공자를 사용할 수 있도록 허용하는 핸들러입니다.
CountingTestResultListener TestStatus 별로 총 테스트 수를 추적하는 TestResultListener
CountTestCasesCollector 지정된 IRemoteTest 에 대한 테스트 사례 수를 세고 보고합니다.
커버리지측정포워더 빌드 공급자에서 로거로 커버리지 측정을 전달하는 자리 표시자 테스트입니다.
적용 범위 옵션 적용 범위 옵션을 보유하는 Tradefed 개체입니다.
CoverageOptions.Toolchain
Cpu스로틀링웨이터 모든 코어의 최대 주파수가 사용 가능한 최고 수준으로 복원될 때까지 기다리는 ITargetPreparer
CreateAvdPreparer
CreateUserPreparer 사용자를 생성하고 마지막에 정리하기 위한 대상 준비자.
현재 호출 호출 내부 어디에서나 유용한 현재 호출 정보를 추적하고 제공하는 클래스입니다.
CurrentInvocation.InvocationInfo 호출을 위해 항상 채울 일부 특수 명명된 키입니다.
CurrentInvocation.IsolationGrade 격리 수준을 설명합니다.

DebugHostLogOnFailureCollector 테스트 사례 실패가 발생할 때 호스트 측 로그를 수집하고 기록하는 수집기.
기본 연결 장치의 표준 adb 연결로 간주되는 장치의 기본 연결 표현입니다.
DefaultConnection.ConnectionBuilder 연결을 설명하는 데 사용되는 작성기입니다.
DefaultRemoteAndroidTestRunner Tradefed 사용 사례에 대한 몇 가지 기본값을 설정하기 위한 ddmlib RemoteAndroidTestRunner 의 확장입니다.
DefaultTestsZipInstaller 테스트 zip 설치 프로그램의 기본 구현입니다.
위임된 호출 실행 실행을 다른 Tradefed 바이너리에 위임하는 InvocationExecution .
종속성 확인자 테스트에 대한 모든 종속성을 가져올 수 있는 새로운 유형의 공급자입니다.
장치 할당 결과 명령에 대한 할당 시도의 결과를 나타냅니다.
장치 할당 상태 IDeviceManager 관점에서 장치의 할당 상태를 나타냅니다.
DeviceAvailableChecker 모듈이 장치를 오프라인 상태로 두지 않는지 확인하는 검사기.
DeviceBaselineChecker 각 모듈 전에 장치 기본 설정을 지정합니다.
DeviceBaselineSetter 장치 기준 설정을 만드는 데 사용되는 추상 클래스입니다.
DeviceBatteryLevelChecker 최소 배터리 충전량을 확인하고 최소 충전량이 없으면 배터리가 두 번째 충전 임계값에 도달할 때까지 기다리는 IRemoteTest 입니다.
DeviceBatteryResourceMetricCollector 이 수집기는 장치 배터리 지표를 수집합니다.
DeviceBuildDescriptor 장치 플랫폼 빌드 정보를 검색하기 위한 도우미 메서드가 포함된 IBuildInfo 의 래퍼 클래스입니다.
DeviceBuildInfo 완전한 Android 장치 빌드 및 (선택 사항) 해당 테스트를 나타내는 IBuildInfo 입니다.
DeviceBuildInfoBootStrapper 빌드 정보 필드를 장치에서 읽은 속성으로 대체하는 ITargetPreparer

이는 외부 소스(예:

DeviceBuildInfoInjector DeviceBuildDescriptor 메타데이터를 IBuildInfo 에 삽입하는 ITargetPreparer 입니다.
디바이스클리너 테스트 후 정리 작업으로 재부팅 또는 포맷을 수행하고 선택적으로 화면을 끕니다.
DeviceCleaner.CleanupAction
DeviceCleaner.PostCleanupAction
DeviceConcurrentUtil 동시 장치 측 명령 실행을 위한 유틸리티 메서드 및 클래스 포함

ShellCommandCallable 로 구현된 명령을 실행하려면 ERROR(/ExecutorService) 사용하고 명령 실행을 위해 ERROR(/ExecutorService) 에서 반환된 ERROR(/Future) 에 대한 동기화를 위해 ERROR(/#joinFuture(String,Future,long)) 사용합니다.

DeviceConcurrentUtil.ShellCommandCallable <V> ITestDevice 에서 셸 명령을 실행하는 세부 정보를 래핑하는 ERROR(/Callable) .
DeviceConfigurationHolder 로드된 장치 구성 개체를 속성에 저장하는 구체적인 IDeviceConfiguration 구현입니다.
장치 설명자 테스트 중인 장치를 설명하는 정보가 포함된 클래스입니다.
DeviceDisconnectedException 장치가 USB 또는 TCP/IP 연결을 통해 더 이상 표시되지 않는 경우 전송 유형을 통해 더 이상 장치에 연결할 수 없을 때 발생합니다.
장치 오류 식별자 장치 오류 및 장치 보고 오류의 오류 식별자.
DeviceFailedToBootError 빌드로 플래시된 후 기기가 부팅에 실패하면 발생합니다.
DeviceFeatureModuleController 특정 기능을 지원하지 않을 때 테스트를 실행하지 않는 모듈 컨트롤러.
DeviceFileReporter 장치에서 파일을 확인하고 발견되면 ITestInvocationListener#testLog(String, LogDataType, InputStreamSource) 로 전송하는 유틸리티 클래스입니다.
DeviceFlashPreparer 실제 Android 하드웨어에서 이미지를 플래시하는 ITargetPreparer 입니다.
DeviceFoldableState "cmd device_state print-states"에 의해 반환된 기기 접기 가능 상태를 나타냅니다.
DeviceFolderBuildInfo 로컬 파일 시스템의 디렉터리에 포함된 다른 빌드 아티팩트도 포함하는 IDeviceBuildInfo 입니다.
DeviceImageZipFlashingTargetPreparer 특정 형식을 통해 제공되는 장치 이미지로 장치를 플래싱하는 대상 준비자.
DeviceInternetAccessibilityResourceMetricCollector 수집기는 google.com에 ping을 보내 기기에 인터넷 액세스가 가능한지 확인합니다.
DeviceJUnit4ClassRunner IDeviceTest 도 수용하는 JUnit4 테스트 러너.
DeviceJUnit4ClassRunner.LogAnnotation 기자에게 로그를 전달하기 위한 가짜 주석.
DeviceJUnit4ClassRunner.MetricAnnotation 리포터에게 메트릭을 전달하기 위한 가짜 주석입니다.
DeviceJUnit4ClassRunner.TestLogData ExternalResourceTestRule 구현.
DeviceJUnit4ClassRunner.TestMetrics ExternalResourceTestRule 구현.
DeviceManagementGrpcServer Tradefed에서 기기를 예약할 수 있는 GRPC 서버.
기기 관리자
DeviceManager.FastbootDevice Fastboot 모드의 장치 표현.
DeviceMetricData 메트릭 수집기가 수집한 모든 데이터를 보관하는 개체입니다.
DeviceMonitorMultiplexer 여러 IDeviceMonitor 에 요청을 전파하는 프록시 클래스입니다.
DeviceNotAvailableException 장치를 더 이상 테스트할 수 없을 때 발생합니다.
DeviceOwnerTargetPreparer 장치 소유자 구성 요소를 설정하는 ITargetPreparer 입니다.
DeviceParameterizedRunner 호스트 측 구동 매개변수화 테스트를 위한 JUnit4 스타일 매개변수화 러너.
장치 속성 장치 측 속성 이름에 대한 일반적인 상수 정의
DeviceRecoveryMode유틸
DeviceReleaseReporter 해제할 장치의 상위 프로세스와의 통신을 처리하는 장치 해제 보고자.
장치 재설정 기능 장치 재설정의 서버 측 구현.
DeviceResetHandler 유틸리티는 일반적으로 장치 재설정을 처리합니다.
DeviceRuntimeException 장치 작업이 예상한 결과를 가져오지 않을 때 발생합니다.
장치 선택 옵션 장치 선택 기준을 위한 컨테이너입니다.
DeviceSelectionOptions.DeviceRequestedType 가능한 다양한 유형의 자리 표시자 장치가 지원됩니다.
DeviceSettingChecker 모듈 실행 중에 장치 설정이 변경되었는지 확인하십시오.
장치 설정 제공된 Option 을 기반으로 테스트용 장치를 구성하는 ITargetPreparer 입니다.
DeviceStateMonitor IDevice 의 상태를 모니터링하기 위한 도우미 클래스입니다.
DeviceStorageAgeResourceMetricCollector logcat에서 저장 기간을 구문 분석합니다.
DeviceStorageFiller 어느 정도의 여유 공간을 사용할 수 있도록 저장소를 채우는 대상 준비자.
DeviceStorageStatusChecker 장치에 주어진 파티션에 대한 충분한 디스크 공간이 있는지 확인하십시오.
DeviceStringPusher 문자열을 파일에 쓰는 대상 준비자.
디바이스 스위트 필요한 테스트에 ITestDevice 제공하기 위해 JUnit4 컨테이너 Suite 확장합니다.
DeviceSyncHelper 새 장치 이미지를 장치에 동기화하는 데 도움이 되는 도우미입니다.
DeviceTestCase IRemoteTestIDeviceTest 서비스를 제공하는 헬퍼 JUnit 테스트 케이스.
DeviceTestResult DeviceNotAvailableException 이 발생할 때 중단되는 TestResult 의 특수화
DeviceTestResult.RuntimeDeviceNotAvailableException
DeviceTestRun옵션 BaseHostJUnit4Test를 통한 장치 테스트 실행과 관련된 옵션의 빌더 클래스입니다.
DeviceTestSuite IRemoteTestIDeviceTest 서비스를 제공하는 도우미 JUnit 테스트 도구 모음입니다.
DeviceTraceCollector 테스트 실행이 시작될 때 perfetto 추적을 시작하고 마지막에 추적 파일을 기록하는 수집기.
장치사용불가모니터 이 수신기는 테스트 사례 수준 DNAE만 캡처하려고 시도합니다.
DeviceUnresponsiveException 장치가 adb에 표시되지만 응답하지 않음(예: 명령 시간 초과, 부팅되지 않음 등)을 나타내는 DeviceNotAvailableException 의 특수화
DeviceUpdateTargetPreparer 외부 소스(빌드 서비스와 반대)의 장치 이미지 파일로 장치를 업데이트하는 일반적인 단계를 처리하는 추상적인 ITargetPreparer 입니다.
DeviceWifiResourceMetricCollector 수집기는 현재 연결된 Wi-Fi 신호 강도 및 링크 속도 메트릭을 수집합니다.
디바이스 와이퍼 사용자 데이터를 지우는 ITargetPreparer
방향성 그래프 <V> 가중치가 없는 방향성 그래프 구현입니다.
DisableSELinuxTargetPreparer 활성화된 경우 SELinux를 비활성화하는 대상 준비자.
DryRunKeyStore 모든 키 저장소 값이 항상 적절하게 대체되고 발견되는 테스트 실행을 위한 키 저장소입니다.
드라이러너 테스트를 실제로 실행하는 대신 투명하게 드라이런합니다.
DynamicFileStubTest 이것은 tradefed가 동적 파일을 올바르게 해결할 수 있는지 테스트하기 위한 tradefed 테스트입니다.
DynamicRemoteFileResolver 원격 파일에 대한 경로를 확인하는 데 도움이 되는 클래스입니다.
DynamicRemoteFileResolver.FileResolverLoader IRemoteFileResolver 구현을 로드합니다.
DynamicShardHelper 여러 TF 인스턴스 간에 작업 원격 작업 대기를 허용하는 샤딩 전략
DynamicSystemPreparer 동적 시스템 업데이트로 장치 빌드 위에 시스템 이미지를 설정하는 ITargetPreparer 입니다.

이자형

EarlyDeviceReleaseFeature 초기 장치 출시를 위한 기능 서버 구현.
이메일 이메일을 보내는 도우미 클래스입니다.
EmailHostHealthAgent 호스트 모니터 보고서에서 이메일을 보내는 IHostHealthAgent 구현
EmmaXml상수 emma xml 보고서를 구문 분석할 때 사용되는 상수입니다.
에뮬레이터메모리CpuCapturer
EndCentralDirectoryInfo EndCentralDirectoryInfo는 zip 파일의 전체 정보를 포함하는 클래스입니다.
EnforcedSeLinuxChecker Selinux의 상태를 확인하는 상태 검사기.
EraseUserDataPreparer 디바이스에서 사용자 데이터를 지우는 ITargetPreparer 입니다.
오류 식별자 이 인터페이스는 특정 오류 및 해당 속성을 설명합니다.
ErrorStorageUtil 공통 스토리지에 맞게 오류를 조작하기 위한 헬퍼 클래스입니다.
이벤트로거리스너 수신한 모든 이벤트를 파일에 기록하는 리스너
ExceptionThrowingRunnerWrapper
ExecutableBaseTest 실행 가능한 테스트 스타일의 기본 클래스입니다.
실행 가능한 호스트 테스트 호스트에서 실행되는 실행 파일의 테스트 러너입니다.
ExecutableTargetTest 대상에서 실행되는 실행 파일에 대한 테스트 러너입니다.
실행 파일 테스트 실행 또는 테스트를 위해 수행해야 하는 호출 중에 생성된 파일 종속성.
ExecutionFiles.FilesKey 지도에 대해 알려진 표준 키의 열거입니다.
실행 속성 테스트 또는 호출 실행 중에 생성된 속성입니다.
기존 빌드 제공자 이미 구성된 IBuildInfo 반환하는 IBuildProvider 입니다.
확장파일 빌드 관련 메타데이터를 전달하는 표준 파일의 확장자입니다.

에프

실패 설명 Trade Federation의 실패 정보를 설명하는 클래스입니다.
FakeTest 반복 가능한 테스트 결과를 쉽게 생성하는 것이 목적인 가짜 테스트입니다.
FakeTestsZip폴더 콘텐츠 목록을 기반으로 압축이 풀린 가짜 테스트 폴더를 만드는 테스트 픽스처입니다.
FakeTestsZipFolder.ItemType
FastbootCommandPreparer 빠른 부팅을 트리거하고 빠른 부팅 명령을 보내는 대상 준비자.
FastbootDeviceFlasher 물리적 Android 하드웨어에서 이미지를 플래시하기 위해 fastboot에 의존하는 클래스입니다.
Fastboot도우미 빠른 부팅 작업을 위한 도우미 클래스입니다.
FastbootUpdateBootstrapPreparer 지정된 파일(부트로더, 라디오, 장치 이미지 zip)을 IDeviceBuildInfo 로 준비하여 장치를 FastbootDeviceFlasher 로 플래시한 다음 결과 보고 목적으로 부팅 후 장치 속성을 빌드 정보에 주입하는 ITargetPreparer 입니다.
치명적인 호스트 오류 TradeFederation을 실행하는 호스트 시스템에서 치명적인 복구 불가능한 오류가 발생했으며 TradeFederation 인스턴스를 종료해야 함을 나타내는 예외입니다.
FeatureFlagTargetPreparer DeviceConfig(원격 서비스에 의해 조정된 기능 플래그)를 업데이트합니다.
파일다운로드캐시 다운로드한 파일의 로컬 파일 시스템 LRU 캐시를 유지 관리하는 도우미 클래스입니다.
FileDownloadCacheFactory FileDownloadCache 생성을 위한 팩토리
파일다운로드캐시 래퍼 IFileDownloader 인터페이스를 구현하는 동안 FileDownloadCache 기능을 제공하는 래퍼 클래스입니다.
FileIdleMonitor 파일을 모니터링하고 유휴 상태인 경우 콜백을 실행합니다(예:
FileInputStreamSource 입력 파일을 받는 InputStreamSource .
파일로거 로그 메시지를 파일 및 stdout으로 보내는 ILeveledLogOutput .
FileProtoResultReporter TestRecord 를 파일로 덤프하는 Proto 기자.
FilePullerDeviceMetricCollector 장치에서 오는 메트릭 키를 수신하고 장치에서 파일로 가져오는 BaseDeviceMetricCollector 입니다.
FilePullerLogCollector 장치 측에서 보고한 파일의 로거입니다.
FileSystemLogSaver 파일 시스템에 로그를 저장합니다.
파일유틸 파일 관련 작업을 위한 헬퍼 클래스
FileUtil.HarnessIOException 파일 문제를 처리하는 데 도움이 되는 하네스 예외입니다.
FileUtil.LowDiskSpaceException 사용 가능한 디스크 공간이 최소 임계값 미만인 경우 발생합니다.
FilteredResultForwarder TestDescription 의 허용 목록만 보고되도록 허용하는 ResultForwarder 의 변형입니다.
FixedByteArrayOutputStream 최대 데이터 양만 유지하는 메모리 내 ERROR(/OutputStream) 입니다.
점멸방식 테스트 중인 장치를 플래시하는 데 사용되는 방법을 설명하는 열거형
FlashingResourcesParser 장치를 플래시하는 데 필요한 보조 이미지 파일의 필수 버전을 구문 분석하는 클래스입니다.
FlashingResourcesParser.AndroidInfo Map&lt;String, MultiMap&lt;String, String&gt;&gt; 에 대한 typedef입니다. .
FlashingResourcesParser.Constraint FlashingResourcesParser 그렇지 않으면 사용할 수 있는 일부 리소스를 무시할 수 있도록 하기 위한 필터링 인터페이스
플래싱리소스유틸 이 유틸리티는 DeviceFlashPreparer 통해 플래시될 수 있도록 적절한 버전의 아티팩트를 설정하는 데 도움이 됩니다.
FoldableExpandingHandler 기본이 아닌 각 접을 수 있는 구성에 대해 더 많은 것으로 확장되는 IModuleParameterHandler 입니다.
접을 수 있는 핸들러 접이식 매개변수를 사용하여 특수 모듈을 생성할 수 있는 일반 접이식 핸들러입니다.
FoldableModePreparer 기기의 접힘 상태를 전환할 수 있는 대상 준비자입니다.
FolderBuildInfo IFolderBuildInfo 의 구체적인 구현입니다.
폴더세이버 장치에서 디렉토리를 가져오고 압축하여 로깅 백엔드에 저장하는 ITargetPreparer 입니다.
FormattedGeneratorReporter 특정 형식으로 보고서를 생성할 수 있는 보고자.
FreeDeviceState
퓨즈유틸 FUSE 작업을 위한 도우미 클래스입니다.

G

GceAvdInfo 지정된 GCE AVD 인스턴스에 대한 관련 데이터를 보유하는 구조입니다.
GceAvdInfo.GceStatus
GceAvdInfo.LogFileEntry
GceManager 시작/중지 및 GCE에서 로그 수집을 위한 GCE 호출을 관리하는 도우미입니다.
GceRemoteCmdFormatter 원격 gce 장치에 도달하기 위한 명령을 포맷하는 유틸리티 클래스입니다.
GceRemoteCmdFormatter.ScpMode args의 구조에 따라 SCP를 사용하여 파일을 푸시하거나 풀할 수 있습니다.
GceSsh터널모니터 Gce ssh 터널용 스레드 모니터.
GcovCodeCoverage수집기 BaseDeviceMetricCollector 는 장치에서 gcov 커버리지 측정을 가져와 테스트 아티팩트로 기록합니다.
GcovKernelCodeCoverageCollector BaseDeviceMetricCollector 는 gcov 커널 커버리지 측정을 debugfs 및 장치 외부로 가져온 다음 최종적으로 테스트 아티팩트로 기록합니다.
GCS버킷유틸 Google Cloud Storage(GCS)에서 파일을 다운로드하고 업로드하는 파일 관리자입니다.
GCSBucketUtil.GCSFileMetadata GCS의 파일 정보에 대한 간단한 래퍼입니다.
GCS공통 다운로드 및 업로드와 같은 Gcs 작업의 기본 클래스입니다.
GCSConfigurationFactory ConfigurationFactory 는 Google Cloud Storage에서 구성을 로드합니다.
GCSConfigurationFactory.GCSConfigLoader GCS에서 구성을 로드하고 하나의 루트 구성에서 포함된 구성을 추적하고 순환 포함에 예외를 발생시키는 ConfigurationFactory.ConfigLoader 의 확장입니다.
GCS구성 서버 구성 서버는 Google Cloud Storage(GCS)에서 구성을 로드합니다.
GCSDownloader도우미 캐싱 및 전역 구성 해결을 담당하는 GCS 버킷용 다운로더입니다.
GCS파일다운로더 파일 다운로더는 Google Cloud Storage(GCS)에서 파일을 다운로드합니다.
GCSFileUploader Google Cloud Storage(GCS)에 파일 데이터를 업로드하는 파일 업로더.
GCSHostResourceManager GCS(Google 클라우드 스토리지)에서 호스트 리소스를 다운로드합니다.
GcsRemoteFileResolver GCS 버킷에서 다운로드할 수 있는 IRemoteFileResolver 구현.
GenericLogcatEventParser <LogcatEventType> 이벤트에 대한 logcat 입력을 구문 분석합니다.
GenericLogcatEventParser.LogcatEvent 이벤트 유형을 사용하여 logcat 이벤트를 보유하고 logcat 메시지를 트리거하는 구조체
GetPreviousPassed도우미 이전에 통과한 테스트 필터를 가져오는 도우미입니다.
GkiDeviceFlashPreparer Android 공통 커널 일반 이미지로 장치를 플래시하는 대상 준비자.
글로벌 구성 로드된 구성 객체를 맵에 저장하는 IGlobalConfiguration 구현
GlobalFilterGetter 지정된 호출의 필터를 반환하는 서비스 구현입니다.
글로벌 테스트 필터 호출에 적용된 필터 옵션.
GoogleApiClientUtil Google API 클라이언트 생성을 위한 유틸리티입니다.
GoogleBenchmarkResultParser 셸에서 실행되는 Google Benchmark의 결과를 구문 분석하고 모든 결과가 포함된 맵을 반환합니다.
Google벤치마크테스트 지정된 기기에서 Google 벤치마크 테스트 패키지를 실행하는 테스트입니다.
세밀한 RetriableTestWrapper 래퍼 클래스는 IRemoteTest 에서 작동하여 테스트 사례 수준에서 IRemoteTest를 세분화합니다.
GranularRetriableTestWrapper.StartEndCollector 누락된 실행 시작 및 종료를 포착하는 클래스 도우미입니다.
GsiDeviceFlash준비자 Android 일반 시스템 이미지로 장치를 플래시하는 대상 준비자.
GTest 지정된 장치에서 기본 테스트 패키지를 실행하는 테스트입니다.
GTestBase gTest의 기본 클래스
GTestListTestParser "--gtest_list_tests" 매개변수가 있는 gtest 시험 실행 모드의 결과 파서입니다.
GTestResult파서 셸에서 실행되는 GTest를 사용하여 네이티브 테스트의 '원시 출력 모드' 결과를 구문 분석하고 결과를 ITestInvocationListener에 알립니다.
GTestXmlResult파서 쉘에서 실행되는 GTest를 사용하여 네이티브 테스트의 'xml 출력 모드' 결과를 구문 분석하고 결과를 ITestRunListener에 알립니다.

시간

HarnessException 하네스 내에서 발생한 예외에 대한 기본 예외 클래스입니다.
HarnessRuntimeException
힙 호스트 모니터 호스트의 힙 메모리를 모니터링하고 기록 로그에 주기적으로 기록하는 AbstractHostMonitor 구현입니다.
HelloWorldMultiTargetPreparer IMultiTargetPreparer 의 구현 예입니다.
HistoryLogger TF History Logger, special log that contains only some specific events.
HostGTest A Test that runs a native test package.
HostMetric This class represents a host metric sample to be reported.
HostOptions Host options holder class.
HostStatsdMetricCollector statsd 유틸리티 명령을 사용하여 호스트 측에서 statsd 메트릭을 수집하는 IMetricCollector .
HostTest A test runner for JUnit host based tests.
HostUtils Implements some useful utility methods for running host tests.
HprofAllocSiteParser Helper class to parse info from an Allocation Sites section of hprof reports.
HttpHelper Contains helper methods for making http requests
HttpHelper.RequestRunnable Runnable for making requests with IRunUtil#runEscalatingTimedRetry(long, long, long, long, IRunnableResult) .
HttpMultipartPost Helper class for making multipart HTTP post requests.
HttpRemoteFileResolver Implementation of IRemoteFileResolver that allows downloading remote file via http
HttpsRemoteFileResolver Implementation of IRemoteFileResolver that allows downloading remote file via https

I

IAbi Interface representing the ABI under test.
IAbiReceiver A test that needs the ABI under test.
IAndroidDebugBridge Interface definition for AndroidDebugBridge methods used in this package.
IAppBuildInfo This interface is deprecated. Use IBuildInfo directly.
IAutoRetriableTest Interface for an IRemoteTest that doesn't implement ITestFilterReceiver but still wishes to support auto-retry.
IBatteryInfo The interface defining the interaction with a battery of a device.
IBatteryInfo.BatteryState Describes the current battery charging state.
IBuildInfo Holds information about the build under test.
IBuildInfo.BuildInfoProperties Some properties that a IBuildInfo can have to tweak some handling of it.
IBuildProvider Responsible for providing info regarding the build under test.
IBuildReceiver A test that needs reference to the build under test.
IClusterClient An interface for interacting with the TFC backend.
IClusterEvent Interface for any cluster event to be uploaded to TFC.
IClusterEventUploader <T extends IClusterEvent > Interface for ClusterEventUploader
IClusterOptions An interface for getting cluster-related options.
ICommandOptions Container for execution options for commands.
ICommandScheduler A scheduler for running TradeFederation commands.
ICommandScheduler.IScheduledInvocationListener 호출 완료 시 호출 이벤트에 대한 리스너입니다.
ICompressionStrategy An interface representing a compression algorithm that can be selected at runtime.
IConfigOptionValueTransformer An interface for manipulating config option value
IConfigurableVirtualDevice An interface to provide information about a possibly preconfigured virtual device info (host ip, host user, ports offset and etc.).
IConfiguration Configuration information for a TradeFederation invocation.
IConfigurationFactory Factory for creating IConfiguration s
IConfigurationReceiver Simple interface to represent object that accepts an IConfiguration .
IConfigurationServer An interface for config server.
ICredentialFactory An interface for credential factory to create oauth2 Credential .
IDefaultObjectLoader Interface for loading the default objects that should be part of our YAML configuration.
IDefaultObjectLoader.LoaderConfiguration The loading configuration object to pass information to the loader.
IDeviceActionReceiver Provides an API to receive device events.
IDeviceBuildInfo A IBuildInfo that represents a complete Android device build and (optionally) its tests.
IDeviceBuildProvider A IBuildProvider that uses information from a ITestDevice to retrieve a build.
IDeviceConfiguration Device Configuration Holder Interface.
IDeviceFlasher Flashes a device image on a device.
IDeviceFlasher.UserDataFlashOption Enum of options for handling the userdata image
IDeviceManager Interface for managing the set of available devices for testing.
IDeviceManager.IFastbootListener A listener for fastboot state changes.
IDeviceMonitor 장치 상태를 모니터링하기 위한 인터페이스.
IDeviceMonitor.DeviceLister 알려진 장치와 해당 상태를 반환해야 하는 Runnable 과 유사한 클래스입니다.
IDeviceRecovery Interface for recovering a device that has gone offline.
IDeviceSelection Interface for device selection criteria.
IDeviceSelection.BaseDeviceType
IDeviceStateMonitor Provides facilities for monitoring the state of a IDevice .
IDeviceTest Interface for object that needs a reference to a ITestDevice .
IDisableable Interface that describes a Tradefed object that can be disabled.
IDynamicShardingClient Wrapper interface for the sharding client

This exists so that we can swap in an HTTP one or testing one if needed.

IEmail Interface for sending email.
IEmail.Message Container for email message data.
IFileDownloader Interface for downloading a remote file.
IFileEntry Interface definition that provides simpler, mockable contract to FileEntry methods.
IFileResolverLoader Loads implementations of IRemoteFileResolver .
IFileResolverLoader.ResolverLoadingException Exception thrown if a resolver cannot be loaded or initialized.
IFlashingResourcesParser Interface for providing required versions of auxiliary image files needed to flash a device.
IFlashingResourcesRetriever Interface for retrieving auxiliary image files needed to flash a device.
IFolderBuildInfo A simple abstract IBuildInfo whose build artifacts are containing in a local filesystem directory.
IFormatterGenerator Interface describing a formatter for SuiteResultHolder .
IGlobalConfiguration A class to encompass global configuration information for a single Trade Federation instance (encompassing any number of invocations of actual configurations).
IHarnessException Description of the harness exception interface that will be implemented by harness exceptions.
IHostCleaner Cleans up the host after the test run has finished.
IHostHealthAgent An interface to emit host or device metrics.
IHostMonitor Interface to dispatch host data
IHostMonitor.HostDataPoint Generic class for data to be reported.
IHostMonitor.HostMetricType
IHostOptions Host options holder interface.
IHostOptions.PermitLimitType Enum describing the possible permit limiters
IHostResourceManager Interface to manager host resource.
IHttpHelper Helper methods for performing http requests.
IHttpHelper.DataSizeException
IInvocationContext Holds information about the Invocation for the tests to access if needed.
IInvocationContext.TimingEvent
IInvocationContextReceiver A test that needs reference to the context of the invocation.
IInvocationExecution Interface describing the actions that will be done as part of an invocation.
IKeyStoreClient Interface to access a key store for password or sensitive data.
IKeyStoreFactory Factory for creating IKeyStoreClient .
ILabPreparer Marker interface for lab preparers

See ITargetPreparer for a description of what these interfaces are intended.

ILeveledLogOutput Classes which implement this interface provides methods that deal with outputting log messages.
ILogcatReceiver A class that provides the output of a device's logcat as an InputStreamSource .
ILogRegistry An interface for a ILogOutput singleton logger that multiplexes and manages different loggers.
ILogRegistry.EventType Events that are useful to be logged
ILogSaver 이 인터페이스를 구현하는 클래스는 로그를 중앙 위치에 저장하는 방법을 제공합니다.
ILogSaverListener ITestInvocationListener 가 로그 파일이 저장될 때 수신하도록 허용합니다.
IManagedTestDevice 수명 주기가 관리되는 ITestDevice입니다.
IManagedTestDevice.DeviceEventResponse IManagedTestDevice#handleAllocationEvent(DeviceEvent) 호출에 대한 응답을 위한 컨테이너
IManagedTestDeviceFactory Creator interface for IManagedTestDevice s
IMetricCollector 이 인터페이스는 일치하는 메트릭을 수집하기 위해 테스트 결과를 보고할 때 데코레이터로 추가됩니다.
IMetricCollectorReceiver Interface for IRemoteTest s to implement if they need to get the list of IMetricCollector s for the test run.
IMoblyYamlResultHandler Interface of mobly yaml result handler.
IMoblyYamlResultHandler.ITestResult Interface of mobly yaml result
IModuleController Interface for controlling if a module should be executed or not.
IModuleController.RunStrategy Enum describing how the module should be executed.
IModuleParameterHandler The interface for parameters of suites modules.
IMultiDeviceRecovery Interface for recovering multiple offline devices.
IMultiDeviceTest This interface is deprecated. This interface is kept temporarily for compatibility but is not actually used anymore. Please do not implement it.
IMultiTargetPreparer Prepares the test environment for several devices together.
INativeDevice Provides an reliable and slightly higher level API to a ddmlib IDevice .
INativeDeviceTest Interface for object that needs a reference to a INativeDevice .
InfraErrorIdentifier Error Identifiers from Trade Federation infra, and dependent infra (like Build infra).
InputStreamSource This interface basically wraps an ERROR(/InputStream) to make it clonable.
InstallAllTestZipAppsSetup A ITargetPreparer that installs all apps in a test zip.
InstallApexModuleTargetPreparer
InstallApkSetup A ITargetPreparer that installs one or more apks located on the filesystem.
InstallBuildEnvApkSetup A ITargetPreparer that installs one or more test apks from an Android platform build env.
InstalledInstrumentationsTest Runs all instrumentation found on current device.
InstantAppHandler Handler for ModuleParameters#INSTANT_APP .
InstrumentationPreparer A ITargetPreparer that runs instrumentation
InstrumentationTest A Test that runs an instrumentation test package on given device.
InvocationContext Generic implementation of a IInvocationContext .
InvocationExecution Class that describes all the invocation steps: build download, target_prep, run tests, clean up.
InvocationLocal <T> This class provides invocation-scope variables.
InvocationMetricLogger A utility class for an invocation to log some metrics.
InvocationMetricLogger.InvocationGroupMetricKey Grouping allows to log several groups under a same key.
InvocationMetricLogger.InvocationMetricKey Some special named key that we will always populate for the invocation.
InvocationStatus A class to store invocation status.
InvocationStatus A helper enum to represent the invocation status
InvocationSummaryHelper Helper class for gathering and reporting TestSummary for set of listeners
InvocationToJUnitResultForwarder ITestInvocationListener 이벤트를 수신하고 이를 TestListener 로 전달하는 클래스입니다.
IPostProcessor 포스트 프로세서는 테스트 후와 결과 보고 전에 메트릭 및 로그 처리를 허용하기 위한 Trade Federation 개체입니다.
IRemoteFeature Interface describing a feature in Tradefed that can be executed based on the request.
IRemoteFileResolver Interface for objects that can resolve a remote file into a local one.
IRemoteFileResolver.RemoteFileResolverArgs The args passed to the resolvers
IRemoteFileResolver.ResolvedFile Class holding information about the resolved file and some metadata.
IRemoteScheduledListenersFeature Extension of IRemoteFeature to support passing in IScheduledInvocationListener s.
IRemoteTest A test that reports results directly to a ITestInvocationListener .
IReportNotExecuted In case of an incomplete execution, IRemoteTest that implements this interface may report their non-executed tests for improved reporting.
IRescheduler Interface for rescheduling a config for future execution.
IResourceMetricCollector The interface for user to implement customized resource collectors.
IRestApiHelper A helper interface for performing REST API calls.
IResumableTest This interface is deprecated. No need for this anymore
IRetryDecision Interface driving the retry decision and applying the filter on the class for more targeted retry.
IRuntimeHintProvider
IRunUtil Interface for running timed operations and system commands.
IRunUtil.EnvPriority Enum that defines whether setting or unsetting a particular env.
IRunUtil.IRunnableResult An interface for asynchronously executing an operation that returns a boolean status.
ISandbox Interface defining a sandbox that can be used to run an invocation.
ISandboxFactory Factory for creating ISandbox .
ISetOptionReceiver Implementation of this interface should have an Option with a "set-option" name linked to HostTest#SET_OPTION_NAME .
IShardableListener 분할할 수 있는 ITestInvocationListener 입니다.
IShardableTest A IRemoteTest that can be split into separately executable sub-tests.
IShardHelper Interface of an object that describes the sharding strategy to adopt for a configuration.
IsolatedHostTest Implements a TradeFed runner that uses a subprocess to execute the tests in a low-dependency environment instead of executing them on the main process.
ISupport 세분화된 결과 ITestInvocationListener 가 세분화된 결과 수신을 지원하는지 여부를 지정하는 인터페이스입니다.
ISystemStatusChecker An checker that performs checks on system status and returns a boolean to indicate if the system is in an expected state.
ISystemStatusCheckerReceiver A IRemoteTest that requires access to the ISystemStatusChecker from the configuration.
ITargetCleaner This interface is deprecated. tearDown has been moved to the base ITargetPreparer interface.
ITargetPreparer Prepares the test environment for the test run.
ITerribleFailureHandler An interface to handle terrible failures from LogUtil.CLog.wtf(String, Throwable)
ITestAnnotationFilterReceiver A runner that can filter which tests to run based on annotations.
ITestCollector Provides support for test collection; when set, test runner must perform a dry run to collect test cases without actually executing them.
ITestDevice Provides an reliable and slightly higher level API to a ddmlib IDevice .
ITestDevice.ApexInfo A simple struct class to store information about a single APEX
ITestDevice.MountPointInfo A simple struct class to store information about a single mountpoint
ITestDevice.RecoveryMode
ITestFileFilterReceiver A runner that can receive a file specifying which tests to run and/or not to run.
ITestFilterReceiver A runner that can filter which tests to run.
ITestInformationReceiver Interface to receive the TestInformation for some classes.
ITestInvocation Handles one TradeFederation test invocation.
ITestInvocation.ExitInformation Represents some exit information for an invocation.
ITestInvocationListener 테스트 호출의 테스트 결과에 대한 리스너입니다.
ITestLifeCycleReceiver Receives event notifications during instrumentation test runs.
ITestLogger 다양한 유형의 데이터 스트림 로깅을 수행할 수 있는 엔터티입니다.
ITestLoggerReceiver An entity that can be injected with an ITestLogger instance so that it can be used for logging purposes.
ITestsPool Interface describing a pool of tests that we can access and run
ITestSuite Abstract class used to run Test Suite.
ITestSuite.MultiDeviceModuleStrategy
ITestSuiteResultLoader Interface describing an helper to load previous results in a way that can be re-run.
ITestSummaryListener ITestInvocationListener 요약을 통해 일부 제한된 정보를 교환할 수 있도록 하는 인터페이스입니다.
ITestsZipInstaller Installs tests from a tests zip file (as outputted by the build system) on a device.
ITokenProvider Interface describing an object that can provide the tokens of a particular device.
ITokenRequest Interface a IRemoteTest can implement to expose the fact that it requires a device with a special token.

J

JarHostTest Test runner for host-side JUnit tests.
JarHostTest.HostTestListener testRunStarted() 및 testRunEnded()를 제외한 모든 이벤트를 포함된 리스너로 전달하는 래퍼 리스너입니다.
JavaCodeCoverage수집기 장치에서 Java 커버리지 측정을 가져와 테스트 아티팩트로 기록하는 BaseDeviceMetricCollector 입니다.
JavaCodeCoverageFlusher A utility class that resets and forces a flush of Java code coverage measurements from processes running on the device.
JSONFileKeyStoreClient A sample implementation where a local JSON file acts a key store.
JSONFileKeyStoreFactory Implementation of a JSON KeyStore Factory, which provides a JSONFileKeyStoreClient for accessing a JSON Key Store File.
JsonHttpTestResultReporter 테스트 메트릭 결과 및 분기, 장치 정보를 JSON으로 인코딩하고 POST를 HTTP 서비스 끝점으로 인코딩하는 결과 보고자
JUnit4ResultForwarder Result forwarder from JUnit4 Runner.
JUnit4TestFilter Helper Class that provides the filtering for JUnit4 runner by extending the Filter .
JUnitRunUtil A helper class for directing a IRemoteTest#run(TestInformation, ITestInvocationListener) call to a Test#run(TestResult) call.
JUnitToInvocationResultForwarder A class that listens to TestListener events and forwards them to an ITestInvocationListener .
JUnitXmlParser Parser that extracts test result data from JUnit results stored in ant's XMLJUnitResultFormatter and forwards it to a ITestInvocationListener.

K

KeyguardControllerState A container for the keyguard states.
KeyguardStatusChecker Checks the keyguard status after module execution.
KeyStoreException Thrown when a fatal key store error happens.
KillExistingEmulatorPreparer A ITargetPreparer that shuts down a running emulator.
KnownFailurePreparer Target preparer to skip retrying known failure.

L

LabResourceDeviceMonitor LabResourceService용 gRPC 서버를 초기화/관리하는 랩 리소스 모니터입니다.
LargeOutputReceiver A class designed to help run long running commands collect output.
LastShardDetector 로컬 샤딩을 실행할 때 때때로 우리는 마지막 샤드가 invocationEnded(long) 에 도달할 때만 일부 작업을 실행하기를 원합니다.
LaunchCvdHelper Utility helper to control Launch_cvd in the Cuttlefish VM.
LeakedThreadStatusChecker Status checker to ensure a module does not leak a running Thread.
LegacySubprocessResultsReporter 상위 클래스의 변경에도 불구하고 이전 버전의 TF/CTS(예: 8+)와 호환되는 하위 프로세스 결과 보고자의 고정된 구현입니다.
ListInstrumentationParser A IShellOutputReceiver that parses the output of a 'pm list instrumentation' query
ListInstrumentationParser.InstrumentationTarget
LocalAndroidVirtualDevice TradeFed 호스트에서 실행되는 로컬 가상 장치의 클래스입니다.
LocalAppBuildProvider A IBuildProvider that constructs a IBuildInfo based on a provided local path
LocalDeveloper Detects and returns whether this is a local developer running Tradefed.
LocalDeviceBuildProvider A IBuildProvider that constructs a IDeviceBuildInfo based on a provided filesystem directory path.
LocalEmulatorLaunch A TargetPreparer that launches an emulator locally from an android build environment.
LocalEmulatorSnapshot A TargetPreparer intended for generating a clean emulator snapshot from a android build/development environment
LocalFileHeader LocalFileHeader is a class containing the information of a file/folder inside a zip file.
LocalFileResolver Implementation of IRemoteFileResolver that allows linking local files
LocalFolderBuildProvider A IBuildProvider that constructs a IFolderBuildInfo based on a provided local path
LocalHostResourceManager Manager host resource.
LocalPool Implementation of a pool of local tests
LocalRunInstructionBuilder Utility to compile the instruction to run test locally.
LockSettingsBaselineSetter A setter to remove screen lock settings.
LogcatCrashResult전달자 특수 리스너: 실패(계측 프로세스 충돌) 시 logcat에서 충돌을 추출하여 테스트와 관련된 실패 메시지에 추가합니다.
LogcatEventParser
LogcatEventType Event types for LogcatEventParser .
LogcatOnFailureCollector 테스트 사례가 실패할 때 logcat을 캡처하고 기록하는 수집기입니다.
LogcatReceiver Class that collects logcat in background.
LogcatTimingMetricCollector logcat 라인에서 이벤트의 시작 및 종료 신호를 구문 분석하기 위해 주어진 정규식 패턴을 사용하여 하나 이상의 반복 테스트 중에 logcat에서 타이밍 정보(예: 사용자 전환 시간)를 수집하는 메트릭 수집기입니다.
LogDataType Represents the data type of log data.
LogFile Class to hold the metadata for a saved log file.
LogFileSaver A helper for ITestInvocationListener 's that will save log data to a file
LogReceiver
LogRegistry 호출하는 스레드의 ThreadGroup 을 기반으로 적절한 로거를 사용하여 다양한 로거를 다중화하고 관리하는 ILogRegistry 구현입니다.
LogSaverResultForwarder 전역 파일 보호기로 로그를 저장하기 위한 ResultForwarder 입니다.
LogUtil A logging utility class.
LogUtil.CLog A shim class for Log that automatically uses the simple classname of the caller as the log tag

M

MainlineModuleHandler A simple handler class for Mainline Modules that creates a InstallApexModuleTargetPreparer and injects the dynamic link into it based on the given mainline modules to automatically retrieve those modules.
MainlineTestModuleController Base class for a module controller to run tests based on the preloaded mainline modules on the device under test.
관리되는 원격 장치 VM 내부의 Tradefed 인스턴스를 통해 원격으로 관리하는 가상 머신 내에서 실행되는 장치입니다.
ManagedTestDeviceFactory Factory to create the different kind of devices that can be monitored by Tf
MaxSdkModuleController Base class for a module controller to not run tests on versions above a specified SDK version number.
MergedZipEntryCollection Merge individual zip entries in a large zip file into blocks to minimize the download attempts.
MergeMultiBuildTargetPreparer A IMultiTargetPreparer that allows to pass information from one build to another by naming them and the file key to copy to the other build.
MergeStrategy Describes how the results should be aggregated when multiple attempts are present.
MetricFilePostProcessor 테스트 및 실행 수준에서 수집된 메트릭 로그 파일을 업로드하는 데 사용됩니다.
MetricOption Annotation for test methods annotated with @Test , or if the annotation is part of the annotation list of TestDescription that allows to specify some extra parameters useful for: Tuning the behavior of the collectors, filtering some methods.
MetricsXMLResultReporter MetricsXMLResultReporter는 테스트의 invocationEnded 단계에서 metrics-folder 매개변수로 지정된 폴더의 XML 파일에 테스트 메트릭 및 실행 메트릭을 기록합니다.
MetricTestCase Extension of TestCase that allows to log metrics when running as part of TradeFed.
MetricTestCase.LogHolder Structure to hold a log file to be reported.
MetricUtil Utility class for pulling metrics from pushed statsd configurations.
MetricUtility Contains common utility methods for storing the test metrics, aggregating the metrics in similar tests and writing the metrics to a file.
MinApiLevelModuleController Base class for a module controller to not run tests when it below a specified API Level.
MinSdkModuleController Base class for a module controller to not run tests on versions below a specified SDK version number.
MixImageZipPreparer An IMultiTargetPreparer that mixes a system build's images in a device build.
MixKernelTargetPreparer A ITargetPreparer that allows to mix a kernel image with the device image.
MoblyBinaryHostTest Host test meant to run a mobly python binary file from the Android Build system (Soong)
MoblyYamlResultControllerInfoHandler Mobly yaml result 'Controller Info' element handler.
MoblyYamlResultControllerInfoHandler.ControllerInfo
MoblyYamlResultControllerInfoHandler.ControllerInfo.Builder
MoblyYamlResultHandlerFactory Mobly yaml result handler factory which generates appropriate handler based on result type.
MoblyYamlResultHandlerFactory.InvalidResultTypeException
MoblyYamlResultHandlerFactory.Type
MoblyYamlResultParser Mobly yaml test results parser.
MoblyYamlResultRecordHandler Mobly yaml result 'Record' element handler.
MoblyYamlResultRecordHandler.Record
MoblyYamlResultRecordHandler.Record.Builder
MoblyYamlResultRecordHandler.RecordResult
MoblyYamlResultSummaryHandler Mobly yaml result 'Summary' element handler.
MoblyYamlResultSummaryHandler.Summary
MoblyYamlResultSummaryHandler.Summary.Builder
MoblyYamlResultTestNameListHandler Mobly yaml result 'Test Name List' element handler.
MoblyYamlResultTestNameListHandler.TestNameList
MoblyYamlResultTestNameListHandler.TestNameList.Builder
MoblyYamlResultUserDataHandler Mobly yaml result 'User Data' element handler.
MoblyYamlResultUserDataHandler.UserData
MoblyYamlResultUserDataHandler.UserData.Builder
ModifiedFilesParser Class responsible to parse and extract information from modified_files.json.
ModuleDefinition Container for the test run configuration.
모듈 리스너 결과 목록을 수집하기 위해 각 모듈의 각 IRemoteTest 에 연결된 리스너입니다.
ModuleLogcatCollector logcat 수집기의 버전이지만 모듈용입니다.
ModuleMerger Helper class for operation related to merging ITestSuite and ModuleDefinition after a split.
ModuleOemTargetPreparer
ModuleParameters Special values associated with the suite "parameter" keys in the metadata of each module.
ModuleParametersHelper Helper to get the IModuleParameterHandler associated with the parameter.
ModulePusher
ModulePusher.ModulePushError Fatal error during Mainline module push.
ModuleSplitter Helper to split a list of modules represented by IConfiguration into a list of execution units represented by ModuleDefinition .
MultiFailureDescription Collect multiple FailureDescription in one holder.
MultiMap <K, V> A ERROR(/Map) that supports multiple values per key.

N

NameMangleListener 테스트 메서드, 클래스 및 패키지 이름을 결과로 변환하는 프록시 리스너가 보고됩니다.
NativeBenchmarkTest A Test that runs a native benchmark test executable on given device.
NativeBenchmarkTestParser A IShellOutputReceiver that parses the benchmark test data output, collecting metrics on average time per operation.
NativeBridgeModuleController A module controller to check if a device support native bridge.
NativeCodeCoverageFlusher A utility class that clears native coverage measurements and forces a flush of native coverage data from processes on the device.
네이티브 장치 ITestDevice 전체 스택이 아닌 Android 기기의 기본 구현입니다.
NativeDevice.AdbAction A ERROR(DeviceAction/com.android.tradefed.device.NativeDevice.DeviceAction DeviceAction) for running a OS 'adb ....' command.
NativeDevice.AdbShellAction
NativeDevice.RebootDeviceAction ERROR(DeviceAction/com.android.tradefed.device.NativeDevice.DeviceAction DeviceAction) for rebooting a device.
NativeDevice.RebootMode A mode of a reboot.
NativeDeviceStateMonitor Helper class for monitoring the state of a IDevice with no framework support.
NativeLeakCollector A ITargetPreparer that runs 'dumpsys meminfo --unreachable -a' to identify the unreachable native memory currently held by each process.
NativeStressTest A Test that runs a native stress test executable on given device.
NativeStressTestParser A IShellOutputReceiver that parses the stress test data output, collecting metrics on number of iterations complete and average time per iteration.
NegativeHandler Handler that specify that nothing should be done and the parameter should not create any extra module.
NestedDeviceStateMonitor Device state monitor that executes extra checks on nested device to accommodate the specifics of the virtualized environment.
중첩된 원격 장치 원격 Cuttlefish VM 내에서 실행되는 장치를 나타냅니다.
NetworkNotAvailableException Thrown when a device is not able to connect to network for testing.
NoApkTestSkipper Special preparer that allows to skip an invocation completely (preparation and tests) if there are no apks to tests.
NoDeviceException Thrown when there's no device to execute a given command.
NoisyDryRunTest Run noisy dry run on a command file.
NoOpConfigOptionValueTransformer An no-op IConfigOptionValueTransformer
NotMultiAbiHandler Special handler that notify the SuiteModuleLoader that the secondary abi should not create a module.
NullDevice A placeholder IDevice used by DeviceManager to allocate when IDeviceSelection#nullDeviceRequested() is true

O

OpenObjectLoader Loader for the default objects available in AOSP.
Option Annotates a field as representing a IConfiguration option.
Option.Importance
OptionClass Annotates a class as representing a IConfiguration object.
OptionCopier A helper class that can copy Option field values with same names from one object to another.
OptionDef Holds the details of an Option .
OptionFetcher Helper to get the test options from the parent process.
OptionNotAllowedException Specific ConfigurationException when an option is not allowed to be passed in the command line.
OptionSetter Populates Option fields.
OptionSetter.OptionFieldsForName Container for the list of option fields with given name.
OptionUpdateRule Controls the behavior when an option is specified multiple times.
OtaDeviceBuildInfo A IDeviceBuildInfo used for over-the-air update testing.
OtatoolsBuildInfo An IBuildInfo that contains otatools artifacts.
OtaZipfileBuildProvider Provides a IBuildInfo based on a local OTA zip file.
OxygenClient A class that manages the use of Oxygen client binary to lease or release Oxygen device.
OxygenUtil Utility to interact with Oxygen service.

P

PackageInfo Container for an application's package info parsed from device.
PackageInstalledModuleController Module controller to not run tests when the device has not got the given packages installed.
Pair <A, B> Define our own Pair class which contains two objects.
PairingMultiTargetPreparer A multi-target preparer helps make Bluetooth pairing (and connection) between two devices.
ParallelDeviceExecutor <V> Wrapper of ERROR(/ExecutorService) to execute a function in parallel.
ParentSandboxInvocationExecution Version of InvocationExecution for the parent invocation special actions when running a sandbox.
ParentShardReplicate Replicate a setup for one device to all other devices that will be part of sharding.
PartialZipDownloadCache Utility to cache partial download files based on their content.
PassingTestFileReporter 통과한 테스트 사례 목록을 테스트 파일에 저장하는 ITestInvocationListener
PerfettoGenericPostProcessor 숫자 값이 있는 필드를 만날 때까지 문자열 값이 있는 proto 메시지 및 필드를 재귀적으로 확장하여 텍스트/이진 메트릭 perfetto proto 파일을 키-값 쌍으로 처리하는 포스트 프로세서입니다.
PerfettoGenericPostProcessor.AlternativeParseFormat
PerfettoGenericPostProcessor.METRIC_FILE_FORMAT
PerfettoPreparer Perfetto preparer pushes the config file in to the device at a standard location to which perfetto have access to.
PerfettoPullerMetricCollector 장치에서 perfetto 파일을 가져오고 메트릭을 수집할 수 있는 FilePullerDeviceMetricCollector 의 기본 구현입니다.
PerfettoPullerMetricCollector.METRIC_FILE_FORMAT
PerfettoTraceRecorder A utility class for recording perfetto trace on a ITestDevice .
PrettyPrintDelimiter Helper utility that helps to print delimited message that stands out.
PrettyTestEventLogger 디버그하기 쉽도록 이벤트를 일치시키고 로깅하는 로거.
ProcessInfo Used to store process related(USER, PID, NAME, START TIME IN SECOND SINCE EPOCH) information.
ProfileParameterHandler Base parameter handler for any profile user.
ProfileTargetPreparer Base class for setting up target preparer for any profile user android.os.usertype.profile.XXX .
PropertyChanger A utility class for changing (or adding) items in an Android property file
ProtoResultParser Parser for the Tradefed results proto format.
ProtoResultParser.TestLevel Enumeration representing the current level of the proto being processed.
ProtoResultReporter 결과 리포터는 모든 결과가 포함된 TestRecord protobuf를 빌드합니다.
ProtoUtil Utility methods for dealing with protobuf messages type-agnostically.
ProxyConfiguration Object that allows pointing to a remote configuration to execute.
PsParser Utility used to parse(USER,PID and NAME) from the "ps" command output
PtsBotTest Run PTS-bot tests.
PushFileInvoker This class is deprecated. Use PushFilePreparer instead
PushFilePreparer A ITargetPreparer that attempts to push any number of files from any host path to any device path.
PythonBinaryHostTest Host test meant to run a python binary file from the Android Build system (Soong)

The test runner supports include-filter and exclude-filter.

PythonBinaryHostTest.PythonForwarder 결과 전달자는 실행 이름을 이진 이름으로 대체합니다.
PythonUnitTestResultParser Interprets the output of tests run with Python's unittest framework and translates it into calls on a series of ITestInvocationListener s.
PythonUnitTestRunner This class is deprecated. Use PythonBinaryHostTest instead.
PythonVirtualenvHelper A helper class for activating Python 3 virtual environment.
PythonVirtualenvPreparer Sets up a Python virtualenv on the host and installs packages.

Q

QuotationAwareTokenizer

R

재부팅 이유 수집기 테스트 실행 중 장치 재부팅을 수집하고 원인 및 횟수별로 보고하는 수집기.
RebootTargetPreparer Target preparer that reboots the device.
RecoveryLogPreparer A target preparer used to collect logs before recovery.
RegexTrie <V> The RegexTrie is a trie where each stored segment of the key is a regex ERROR(/Pattern) .
원격안드로이드장치 adb connect를 통해 연결된 전체 스택 Android 기기용 ITestDevice 구현입니다.
원격AndroidVirtualDevice Google Compute Engine(Gce)에서 실행되는 전체 스택 Android 기기에 대한 RemoteAndroidDevice 동작을 확장합니다.
RemoteAvdIDevice A placeholder IDevice used by DeviceManager to allocate when DeviceSelectionOptions.gceDeviceRequested() is true
RemoteDynamicPool Implementation of a pool of remote work queued tests
RemoteFileResolver A simple class that allows one to load files from a variety of places using URIs and the service provider functionality.
RemoteFileUtil Utility class to handle file from a remote instance
RemoteInvocationExecution Implementation of InvocationExecution that drives a remote execution.
RemoteInvocationExecution.FileOptionValueTransformer
RemoteSshUtil Utility to execute ssh commands on remote instances.
RemoteTestTimeOutEnforcer 지정된 테스트 구성의 실행 시간을 확인하고 지정된 제한 시간을 초과하면 실패하도록 허용하는 리스너입니다.
RemoteZip Utilities to unzip individual files inside a remote zip file.
RemoveSystemAppPreparer A ITargetPreparer for removing an apk from the system partition before a test run.
합격한 테스트 보고 합격한 테스트를 제외하기 위해 가능한 필터를 파일로 보고합니다.
ResolvePartialDownload Resolve a partial download request.
ResourceMetricUtil Utility functions for composing metrics.
ResourceUtil Utility for reading configuration resources.
RestApiHelper A helper class for performing REST API calls.
RestartSystemServerTargetPreparer Target preparer that restarts the system server without rebooting the device.
ResultAggregator 수행된 재시도 전략에 따라 필요할 때 결과를 집계하는 특수 전달자입니다.
ResultAndLogForwarder 결과 및 로그 이벤트 전달자.
결과 전달자 호출 결과를 다른 수신기 목록에 전달하는 ITestInvocationListener 입니다.
ResultsPlayer Special runner that replays the results given to it.
RetentionFileSaver Helper class for creating a .retention file in a directory.
RetryConfigurationFactory Factory that handles retrying a command.
RetryLogSaverResultForwarder 우리가 있는 현재 시도를 전달하는 전달자도 처리합니다.
RetryPreparationDecision A Class to describe the decisions about whether or not to retry preparation and to fail the module run.
RetryRescheduler A special runner that allows to reschedule a previous run tests that failed or where not executed.
RetryRescheduler.RetryType The types of the tests that can be retried.
RetryResultForwarder 항상 주어진 시도 횟수로 푸시하는 ResultForwarder 의 확장입니다.
RetryResultHelper Helper class to determine which module or test should run or not.
RetryStatistics Structure holding the statistics for a retry session of one IRemoteTest .
RetryStrategy The Retry Strategy to be used when re-running some tests.
RootTargetPreparer Target preparer that performs "adb root" or "adb unroot" based on option "force-root".
RunAftersWithInfo
RunBeforesWithInfo
RunCommandTargetPreparer
RunConfigDeviceRecovery Generic base IMultiDeviceRecovery to run a tradefed configuration to do the recovery step.
RunHostCommandTargetPreparer Target preparer to run arbitrary host commands before and after running the test.
RunHostScriptTargetPreparer Target preparer which executes a script before running a test.
RunInterruptedException Thrown when a run operation is interrupted by an external request.
RunNotifierWrapper Wrapper of RunNotifier so we can carry the DeviceNotAvailableException .
RunOnCloneProfileParameterHandler
RunOnCloneProfileTargetPreparer
RunOnSdkSandboxHandler Handler for ModuleParameters#RUN_ON_SDK_SANDBOX .
RunOnSdkSandboxTargetPreparer An ITargetPreparer to marks that tests should run in the sdk sandbox.
RunOnSecondaryUserParameterHandler
RunOnSecondaryUserTargetPreparer An ITargetPreparer that creates a secondary user in setup, and marks that tests should be run in that user.
RunOnSystemUserTargetPreparer An ITargetPreparer that marks that tests should be run on the user (rather than the current user).
RunOnWorkProfileParameterHandler
RunOnWorkProfileTargetPreparer An ITargetPreparer that creates a work profile in setup, and marks that tests should be run in that user.
RuntimeRestartCollector 테스트 실행 중 런타임 다시 시작(시스템 서버 충돌)의 타임스탬프를 수집하는 수집기(있는 경우).
RunUtil A collection of helper methods for executing operations.
RustBenchmarkResultParser Interprets the output of tests run with Criterion benchmarking framework and translates it into calls on a series of ITestInvocationListener s.
RustBinaryHostTest Host test meant to run a rust binary file from the Android Build system (Soong)
RustBinaryTest A Test that runs a rust binary on given device.
RustTestBase Base class of RustBinaryHostTest and RustBinaryTest
RustTestBase.EnvPair
RustTestBase.Invocation
RustTestResultParser Interprets the output of tests run with Rust's unittest framework and translates it into calls on a series of ITestInvocationListener s.

S

SandboxConfigDump Runner class that creates a IConfiguration based on a command line and dump it to a file.
SandboxConfigDump.DumpCmd
SandboxConfigurationException Special Configuration Exception coming from the Sandbox setup.
SandboxConfigurationFactory Special Configuration factory to handle creation of configurations for Sandboxing purpose.
SandboxConfigUtil A utility class for managing IConfiguration when doing sandboxing.
SandboxedInvocationExecution Special sandbox execution of the invocation: This is the InvocationExection for when we are inside the sandbox running the command.
SandboxInvocationRunner Run the tests associated with the invocation in the sandbox.
SandboxOptions Class that can receive and provide options to a ISandbox .
스크린샷OnFailureCollector 테스트 사례가 실패할 때 스크린샷을 캡처하고 기록하는 수집기입니다.
Sdk28ModuleController A module controller to check if a device is on SDK 28 (Android 9) or above.
Sdk29ModuleController Only run tests if the device under test is SDK version 29 or above.
Sdk30ModuleController Only run tests if the device under test is SDK version 30 or above.
Sdk31ModuleController Only run tests if the device under test is SDK version 31 or above.
Sdk32ModuleController Only run tests if the device under test is SDK version 32 or above.
Sdk33ModuleController Only run tests if the device under test is SDK version 33 or above.
Sdk34ModuleController Only run tests if the device under test is SDK version 34 or above.
SecondaryUserHandler Handler for ModuleParameters#SECONDARY_USER .
SecondaryUserOnDefaultDisplayHandler Handler for ModuleParameters#SECONDARY_USER_ON_DEFAULT_DISPLAY .
SecondaryUserOnSecondaryDisplayHandler Handler for ModuleParameters#SECONDARY_USER_ON_SECONDARY_DISPLAY .
SemaphoreTokenTargetPreparer This is a preparer used to use token to serialize test excution in tradefed host.
SerializationUtil Utility to serialize/deserialize an object that implements ERROR(/Serializable) .
ServiceAccountKeyCredentialFactory A credential factory to create service account key based oauth Credential .
SettingsBaselineSetter A common setter to handle device baseline settings via ITestDevice.setSetting.
ShardBuildCloner Helper class that handles cloning a build info from the command line.
ShardHelper Helper class that handles creating the shards and scheduling them for an invocation.
샤드리스너 호출 샤드(여러 리소스에서 병렬로 실행하기 위한 호출 분할이라고도 함)에서 결과를 수집하고 다른 리스너로 전달하는 ITestInvocationListener 입니다.
ShardMainResultForwarder 분할된 테스트 호출의 결과를 결합하는 ResultForwarder 입니다.
ShellOutputReceiverStream Utility subclass of OutputStream that writes into an IShellOutputReceiver.
ShellStatusChecker Check if the shell status is as expected before and after a module run.
ShippingApiLevelModuleController Run tests if the device meets the following conditions:
  • If min-api-level is defined:
    • The device shipped with the min-api-level or later.
ShowmapPullerMetricCollector FilePullerDeviceMetricCollector 의 기본 구현으로 장치에서 쇼맵 파일을 가져오고 메트릭을 수집할 수 있습니다.
SideloadOtaTargetPreparer A target preparer that performs sideload of a specified OTA package, applies the package, waits for device to boot up, and injects the device build properties to use as build info

This target preparer assumes that the device will be in regular adb mode when started, and will ensure that the device exits in the same mode but with the newer build applied.

SimpleFileLogger A ILeveledLogOutput that directs log messages to stdout and to a single log file.
SimplePerfResult Object to hold all simpleperf test results
SimplePerfStatResultParser A utility class to parse simpleperf result.
SimplePerfUtil Utility class to dispatch simple command and collect results
SimplePerfUtil.SimplePerfType Enum of simpleperf command options
SimpleStats A small utility class that calculates a few statistical measures given a numerical dataset.
SizeLimitedOutputStream A thread safe file backed ERROR(/OutputStream) that limits the maximum amount of data that can be written.
SkipHWASanModuleController Base class for a module controller to not run tests on HWASan builds.
Sl4aBluetoothUtil A utility class provides Bluetooth operations on one or two devices using SL4A
Sl4aBluetoothUtil.BluetoothAccessLevel Enums for Bluetooth device access level which are based on BluetoothDevice.java
Sl4aBluetoothUtil.BluetoothConnectionState Enums for Bluetooth connection states which are based on BluetoothProfile.java
Sl4aBluetoothUtil.BluetoothPriorityLevel Enums for Bluetooth profile priority level which are based on BluetoothProfile.java
Sl4aBluetoothUtil.BluetoothProfile Enums for Bluetooth profiles which are based on BluetoothProfile.java
Sl4aClient Sl4A client to interact via RPC with SL4A scripting layer.
Sl4aEventDispatcher Event dispatcher polls for event and queue them by name to be queried.
Sl4aEventDispatcher.EventSl4aObject Object returned by the event poller.
SnapshotInputStreamSource A File-backed InputStreamSource.
SparseImageUtil Utility to unsparse sparse images.
SparseImageUtil.SparseInputStream SparseInputStream read from upstream and detects the data format.
StatsdBeforeAfterGaugeMetricPostProcessor "이전/이후" 접근 방식으로 수집된 게이지 메트릭을 처리하는 포스트 프로세서, 즉
StatsdEventMetricPostProcessor 프로세서에 지정된 포맷터를 사용하여 statsd 보고서의 이벤트 메트릭을 키-값 쌍으로 처리하는 포스트 프로세서입니다.
StatsdGenericPostProcessor 보고서를 트리 구조로 확장하여 이진 proto statsd 보고서를 키-값 쌍으로 처리하는 포스트 프로세서입니다.
StatusCheckerResult Contains the result of a ISystemStatusChecker execution.
StatusCheckerResult.CheckStatus
StdoutLogger A ILeveledLogOutput that directs log messages to stdout.
StopServicesSetup A ITargetPreparer that stops services on the device.
StreamProtoReceiver 받은 proto TestRecord를 Tradefed 이벤트로 변환하는 수신자입니다.
StreamProtoResultReporter ProtoResultReporter 구현
StreamUtil Utility class for managing input streams.
StrictShardHelper Sharding strategy to create strict shards that do not report together,
StringEscapeUtils Utility class for escaping strings for specific formats.
StringUtil Utility class for escaping strings for common string manipulation.
StubBuildProvider No-op empty implementation of a IBuildProvider .
StubDevice Stub placeholder implementation of a IDevice .
StubKeyStoreClient Default stub implementation for KeyStore Client.
StubKeyStoreFactory Default stub implementation for KeyStore Factory
StubLocalAndroidVirtualDevice A placeholder IDevice used by DeviceManager to allocate when DeviceSelectionOptions.localVirtualDeviceRequested() is true
StubMultiTargetPreparer Placeholder empty implementation of a IMultiTargetPreparer .
StubTargetPreparer Placeholder empty implementation of a ITargetPreparer .
StubTest No-op empty test implementation.
StubTestRunListener Stub implementation of ITestRunListener
SubprocessCommandException A subprocess command failed to run.
SubprocessConfigBuilder Build a wrapper TF config XML for an existing TF config.
SubprocessEventHelper Helper to serialize/deserialize the events to be passed to the log.
SubprocessEventHelper.BaseTestEventInfo Base Helper for TestIgnored information.
SubprocessEventHelper.FailedTestEventInfo Helper for testFailed information.
SubprocessEventHelper.InvocationEndedEventInfo Helper for invocation ended information.
SubprocessEventHelper.InvocationFailedEventInfo Helper for InvocationFailed information.
SubprocessEventHelper.InvocationStartedEventInfo Helper for invocation started information.
SubprocessEventHelper.LogAssociationEventInfo Helper for logAssociation information.
SubprocessEventHelper.TestEndedEventInfo Helper for testEnded information.
SubprocessEventHelper.TestLogEventInfo Helper for testLog information.
SubprocessEventHelper.TestModuleStartedEventInfo Helper for test module started information.
SubprocessEventHelper.TestRunEndedEventInfo Helper for testRunEnded Information.
SubprocessEventHelper.TestRunFailedEventInfo Helper for testRunFailed information
SubprocessEventHelper.TestRunStartedEventInfo Helper for testRunStarted information
SubprocessEventHelper.TestStartedEventInfo Helper for testStarted information
SubprocessExceptionParser Helper to handle the exception output from standard Tradefed command runners.
SubprocessReportingHelper A class to build a wrapper configuration file to use subprocess results reporter for a cluster command.
하위 프로세스 결과 보고자 result_reporter로 지정될 ITestInvocationListener 구현하고 테스트, 테스트 실행, 테스트 호출의 결과를 하위 프로세스에서 전달합니다.
SubprocessTestResultsParser Extends ERROR(/FileOutputStream) to parse the output before writing to the file so we can generate the test events on the launcher side.
SubprocessTestResultsParser.StatusKeys Relevant test status keys.
SubprocessTfLauncher A IRemoteTest for running tests against a separate TF installation.
SuiteApkInstaller Installs specified APKs for Suite configuration: either from $ANDROID_TARGET_OUT_TESTCASES variable or the ROOT_DIR in build info.
SuiteModuleLoader Retrieves Compatibility test module definitions from the repository.
SuiteModuleLoader.ConfigFilter A ERROR(/FilenameFilter) to find all the config files in a directory.
SuiteResultHolder Helper object to ease up serializing and deserializing the invocation results.
SuiteResultReporter 전체 제품군 호출에 대한 테스트 결과를 수집하고 최종 결과를 출력합니다.
SuiteResultReporter.ModulePrepTimes Object holder for the preparation and tear down time of one module.
SuiteTestFilter Represents a filter for including and excluding tests.
SwitchUserTargetPreparer A ITargetPreparer that switches to the specified user kind in setUp.
SystemServerFileDescriptorChecker Checks if system server appears to be running out of FDs.
SystemServerStatusChecker Check if the pid of system_server has changed from before and after a module run.
SystemUpdaterDeviceFlasher A IDeviceFlasher that relies on the system updater to install a system image bundled in a OTA update package.
SystemUtil Utility class for making system calls.
SystemUtil.EnvVariable

T

TableBuilder Helper class to display a matrix of String elements in a table.
TableFormatter Helper class to display a matrix of String elements so each element column is lined up
TargetFileUtils
TargetFileUtils.FilePermission
TargetSetupError A fatal error occurred while preparing the target for testing.
TarUtil Utility to manipulate a tar file.
TcpDevice A placeholder IDevice used by DeviceManager to allocate when DeviceSelectionOptions.tcpDeviceRequested() is true
TearDownPassThroughPreparer Allows for running tearDown on preparers that are included in a config as an object.
TelephonyHelper A utility to use and get information related to the telephony.
TelephonyHelper.SimCardInformation An information holder for the sim card related information.
TelephonyTokenProvider Token provider for telephony related tokens.
TemperatureThrottlingWaiter An ITargetPreparer that waits until device's temperature gets down to target
TemplateResolutionError Class extending ConfigurationException for template related error during configuration parsing.
TerribleFailureEmailHandler A simple handler class that sends an email to interested people when a WTF (What a Terrible Failure) error occurs within a Trade Federation instance.
TestAppInstallSetup A ITargetPreparer that installs one or more apps from a IDeviceBuildInfo.getTestsDir() folder onto device.
TestContext A class to model a TestContext message of TFC API.
TestDependencyResolver Helper to resolve dependencies if needed.
TestDescription Class representing information about a test case.
TestDescriptionsFile A utility class for marshalling and unmarshalling a list of TestDescriptions to a test file.
테스트 장치 전체 스택 Android 기기용 ITestDevice 구현
TestDevice.MicrodroidBuilder A builder used to create a Microdroid TestDevice.
TestDeviceOptions Container for ITestDevice Option s
TestDeviceOptions.InstanceType
TestDeviceState A more fully featured representation of device state than DeviceState .
TestEnvironment A class to model a TestEnvironment message returned by TFC API.
TestErrorIdentifier Error identifier from tests and tests runners.
TestFailureListener 요청 시 테스트 실패 시 스크린샷, 버그리포트, 로그캣 수집 등의 조치를 취하는 리스너입니다.
TestFailureModuleController Controller for module that simply want to tune how the tests failures log collected are behaving.
TestFilePushSetup A ITargetPreparer that pushes one or more files/dirs from a IDeviceBuildInfo.getTestsDir() folder onto device.
TestFilterHelper Helper class for filtering tests
TestGroupStatus A class to store status of a test group.
TestInfo Stores the test information set in a TEST_MAPPING file.
TestInformation Holder object that contains all the information and dependencies a test runner or test might need to execute properly.
TestInformation.Builder Builder to create a TestInformation instance.
TestInvocation Default implementation of ITestInvocation .
TestInvocation.RunMode The different mode an invocation can run into.
TestInvocation.Stage
TestInvocationManagementServer GRPC server helping to management test invocation and their lifecycle.
TestInvocationManagementServer.InvocationInformation
TestMapping A class for loading a TEST_MAPPING file.
TestMappingSuiteRunner Implementation of BaseTestSuite to run tests specified by option include-filter, or TEST_MAPPING files from build, as a suite.
TestOption Stores the test option details set in a TEST_MAPPING file.
TestOutputUploader Uploads test output files to local file system, GCS, or an HTTP(S) endpoint.
TestRecordInterpreter Utility to convert a TestRecord proto into a more easily manipulable format in Tradefed.
TestRecordProtoUtil Utility to read the TestRecord proto from a file.
TestResource A class to model a TestResource message returned by TFC API.
TestResourceDownloader A class to download test resource files from file system/GCS/HTTP.
TestResult Container for a result of a single test.
TestResultListener A simplification of ITestLifecycleListener for implementers that only care about individual test results.
TestRunnerUtil A utility class to help various test runners.
TestRunResult Holds results from a single test run.
TestRunToTestInvocationForwarder Forwarder from ddmlib ITestRunListener to ITestLifeCycleReceiver .
TestsPoolPoller Tests wrapper that allow to execute all the tests of a pool of tests.
TestSuiteInfo A class that resolves loading of build related metadata for test suite

To properly expose related info, a test suite must include a test-suite-info.properties file in its jar resources

TestSummary A class to represent a test summary.
TestSummary.Type
TestSummary.TypedString
TestSystemAppInstallSetup A ITargetPreparer that installs one or more apps from a IDeviceBuildInfo.getTestsDir() folder onto the /system partition on device.
TestTimeoutEnforcer 주어진 테스트 케이스의 실행 시간을 확인하고 주어진 시간 초과 시 실패할 수 있는 리스너.
TextResultReporter 결과를 JUnit 텍스트 결과 프린터로 전달하는 테스트 결과 보고자.
TfMetricProtoUtil Utility class to help with the Map to Map transition.
TfObjectTracker A utility to track the usage of the different Trade Fedederation objects.
TfSuiteRunner Implementation of ITestSuite which will load tests from TF jars res/config/suite/ folder.
TfTestLauncher A IRemoteTest for running unit or functional tests against a separate TF installation.
TimeStatusChecker Status checker to ensure that the device and host time are kept in sync.
TimeUtil Contains time related utility methods.
TimeVal This is a sentinel type which wraps a Long .
TimeWaster A simple target preparer to waste time and potentially restart the device.
TokenProperty Supported token with dynamic sharding.
TokenProviderHelper Helper that gives the provider associated to a particular token, in order to find out if a device supports the token.
추적Cmd수집기 trace-cmd를 사용하여 테스트 중에 추적을 수집하고 호출에 기록하는 IMetricCollector 입니다.
TracePropagatingExecutorService An executor service that forwards tasks to an underlying implementation while propagating the tracing context.
TracingLogger Class that helps to manage tracing for each test invocation.
TradefedConfigObject A class to model a TradefedConfigObject message of TFC API.
TradefedConfigObject.Type A list of configuration object types which can be injected to a cluster command config.
TradefedDelegator Objects that helps delegating the invocation to another Tradefed binary.
TradefedFeatureClient A grpc client to request feature execution from the server.
TradefedFeatureServer A server that responds to requests for triggering features.
TradefedSandbox Sandbox container that can run a Trade Federation invocation.
TradefedSandboxFactory Default implementation for SandboxFactory
TradefedSandboxRunner Runner associated with a TradefedSandbox that will allow executing the sandbox.
TradefedSandboxRunner.StubScheduledInvocationListener 아무것도 하지 않는 스텁 IScheduledInvocationListener .

U

UiAutomatorRunner Runs UI Automator test on device and reports results.
UiAutomatorTest
UiAutomatorTest.LoggingOption
UiAutomatorTest.TestFailureAction
UnexecutedTestReporterThread Threads that takes care of reporting all unexecuted tests.
UniqueMultiMap <K, V> A MultiMap that ensures unique values for each key.
UsbResetMultiDeviceRecovery A IMultiDeviceRecovery which resets USB buses for offline devices.
UsbResetRunConfigRecovery Allow to trigger a command to reset the USB of a device
UsbResetTest An IRemoteTest that reset the device USB and checks whether the device comes back online afterwards.
UserChecker Checks if users have changed during the test.
UserCleaner A ITargetPreparer that removes secondary users on teardown.
UserHelper
UserInfo Similar to UserInfo class from platform.
UserInfo.UserType Supported variants of a user's type in external APIs.

V

ValidateSuiteConfigHelper This class will help validating that the IConfiguration loaded for the suite are meeting the expected requirements: - No Build providers - No Result reporters
VersionedFile Data structure representing a file that has an associated version.
VersionParser Fetch the version of the running tradefed artifacts.
VisibleBackgroundUserPreparer Target preparer for running tests in a user that is started in the visible in the background.
VmRemoteDevice A Remote virtual device that we will manage from inside the Virtual Machine.

W

WaitDeviceRecovery A simple implementation of a IDeviceRecovery that waits for device to be online and respond to simple commands.
WaitForDeviceDatetimePreparer A ITargetPreparer that waits for datetime to be set on device

Optionally this preparer can force a TargetSetupError if datetime is not set within timeout, or force host datetime onto device,

WifiHelper Helper class for manipulating wifi services on device.
WifiPreparer A ITargetPreparer that configures wifi on the device if necessary.

X

XmlFormattedGeneratorReporter 제품군을 형식화하는 FormattedGeneratorReporter 의 구현은 xml 형식입니다.
XmlResultReporter JUnit 결과를 Ant의 XMLJUnitResultFormatter와 일치하는 형식으로 XML 파일에 기록합니다.
XmlSuiteResultFormatter Utility class to save a suite run as an XML.
XmlSuiteResultFormatter.RunHistory Helper object for JSON conversion.

Y

YamlClassOptionsParser Helper to parse test runner information from the YAML Tradefed Configuration.

Z

ZipCompressionStrategy An ICompressionStrategy for creating zip archives.
ZipUtil A helper class for compression-related operations
ZipUtil2 A helper class for zip extraction that takes POSIX file permissions into account