Android 9 Uyumluluk Tanımı

1. Giriş

Bu belge, cihazların Android 9 ile uyumlu olması için karşılanması gereken gereksinimleri sıralamaktadır.

"ZORUNLU", "OLMAMALIDIR", "ZORUNLU", "OLACAKTIR", "OLMAYACAKTIR", "YAPMALIDIR", "OLMAMALIDIR", "ÖNERİLİR", "MAY" ve "İSTEĞE BAĞLI" ifadelerinin kullanımı IETF'ye göredir. RFC2119'da tanımlanan standart.

Bu belgede kullanıldığı şekliyle "cihaz uygulayıcısı" veya "uygulayıcı", Android 9 çalıştıran bir donanım/yazılım çözümü geliştiren kişi veya kuruluştur. "Cihaz uygulaması" veya "uygulama", bu şekilde geliştirilen donanım/yazılım çözümüdür.

Android 9 ile uyumlu sayılması için cihaz uygulamalarının, referans yoluyla dahil edilen tüm belgeler de dahil olmak üzere bu Uyumluluk Tanımında sunulan gereksinimleri karşılaması GEREKİR.

Bu tanımın veya bölüm 10'da açıklanan yazılım testlerinin sessiz, belirsiz veya eksik olduğu durumlarda, mevcut uygulamalarla uyumluluğun sağlanması cihaz uygulayıcısının sorumluluğundadır.

Bu nedenle Android Açık Kaynak Projesi , Android'in hem referansı hem de tercih edilen uygulamasıdır. Cihaz uygulayıcılarının, uygulamalarını mümkün olan en geniş ölçüde Android Açık Kaynak Projesi'nde bulunan "yukarı akış" kaynak koduna dayandırmaları ŞİDDETLE TAVSİYE EDİLİR. Bazı bileşenler varsayımsal olarak alternatif uygulamalarla değiştirilebilirken, yazılım testlerini geçmek büyük ölçüde zorlaşacağından bu uygulamaya uyulmaması KESİNLİKLE TAVSİYE EDİLİR. Uyumluluk Test Paketi dahil ve ötesinde, standart Android uygulamasıyla tam davranışsal uyumluluğun sağlanması uygulayıcının sorumluluğundadır. Son olarak, belirli bileşen değişikliklerinin ve modifikasyonlarının bu belgede açıkça yasaklandığını unutmayın.

Bu belgede bağlantısı verilen kaynakların çoğu, doğrudan veya dolaylı olarak Android SDK'dan türetilmiştir ve işlevsel olarak söz konusu SDK'nın belgelerindeki bilgilerle aynı olacaktır. Bu Uyumluluk Tanımının veya Uyumluluk Test Paketinin SDK belgeleriyle uyuşmadığı durumlarda, SDK belgeleri yetkili kabul edilir. Bu belge boyunca bağlantılı kaynaklarda sağlanan tüm teknik ayrıntılar, dahil edilerek bu Uyumluluk Tanımının bir parçası olarak kabul edilir.

1.1 Belge Yapısı

1.1.1. Cihaz Türüne Göre Gereksinimler

Bölüm 2, belirli bir cihaz tipine uygulanan tüm gereklilikleri içermektedir. Bölüm 2'nin her alt bölümü belirli bir cihaz tipine ayrılmıştır.

Tüm Android cihaz uygulamalarına evrensel olarak uygulanan diğer tüm gereksinimler, Bölüm 2'den sonraki bölümlerde listelenmiştir. Bu gereksinimlere bu belgede "Temel Gereksinimler" adı verilmektedir.

1.1.2. Gereksinim Kimliği

MUST gereksinimleri için gereksinim kimliği atanır.

  • Kimlik yalnızca MUST gereksinimleri için atanır.
  • KESİNLİKLE ÖNERİLEN gereksinimler [SR] olarak işaretlenmiştir ancak kimlik atanmamıştır.
  • Kimlik aşağıdakilerden oluşur: Cihaz Tipi Kimliği - Durum Kimliği - Gereksinim Kimliği (örn. C-0-1).

Her kimlik aşağıdaki gibi tanımlanır:

  • Cihaz Türü Kimliği ( 2. Cihaz Türleri bölümünde daha fazlasını görün)
    • C: Çekirdek (Herhangi bir Android cihaz uygulamasına uygulanan gereksinimler)
    • H: Android El Tipi cihaz
    • T: Android Televizyon cihazı
    • C: Android Otomotiv uygulaması
    • Sekme: Android Tablet uygulaması
  • Durum Kimliği
    • Gereksinim koşulsuz olduğunda bu ID 0 olarak ayarlanır.
    • Gereksinim koşullu olduğunda 1. koşula 1 atanır ve aynı bölüm ve aynı cihaz tipinde sayı 1 artar.
  • Gereksinim Kimliği
    • Bu ID 1'den başlar ve aynı bölüm ve aynı koşul içerisinde 1'er artar.

1.1.3. Bölüm 2'deki Gereksinim Kimliği

Bölüm 2'deki Gereksinim Kimliği, karşılık gelen bölüm kimliğiyle başlar ve bunu yukarıda açıklanan Gereksinim Kimliği takip eder.

  • Bölüm 2'deki kimlik aşağıdakilerden oluşur: Bölüm Kimliği / Cihaz Tipi Kimliği - Durum Kimliği - Gereksinim Kimliği (örn. 7.4.3/A-0-1).

2. Cihaz Türleri

Android Açık Kaynak Projesi, çeşitli cihaz türleri ve form faktörleri için kullanılabilecek bir yazılım yığını sağlarken, nispeten daha iyi kurulmuş bir uygulama dağıtım ekosistemine sahip birkaç cihaz türü de vardır.

Bu bölümde bu cihaz tipleri ve her cihaz tipi için geçerli olan ek gereksinimler ve öneriler açıklanmaktadır.

Açıklanan cihaz türlerinden herhangi birine uymayan tüm Android cihaz uygulamalarının yine de bu Uyumluluk Tanımının diğer bölümlerindeki tüm gereksinimleri karşılaması ZORUNLUDUR.

2.1 Cihaz Konfigürasyonları

Cihaz türüne göre donanım yapılandırmasındaki büyük farklılıklar için bu bölümde yer alan cihaza özel gereksinimlere bakın.

2.2. Elde Taşınabilir Gereksinimler

Android El Tipi cihaz, mp3 çalar, telefon veya tablet gibi genellikle elde tutularak kullanılan bir Android cihaz uygulamasını ifade eder.

Android cihaz uygulamaları, aşağıdaki kriterlerin tümünü karşılamaları durumunda Elde Taşınabilir olarak sınıflandırılır:

  • Pil gibi hareket kabiliyeti sağlayan bir güç kaynağına sahip olun.
  • 2,5 ila 8 inç aralığında fiziksel çapraz ekran boyutuna sahip olun.

Bu bölümün geri kalanındaki ek gereksinimler Android Handheld cihaz uygulamalarına özeldir.

Not: Android Tablet cihazlar için geçerli olmayan gereksinimler * ile işaretlenmiştir.

2.2.1. Donanım

Elde taşınır cihaz uygulamaları:

  • [ 7.1 .1.1/H-0-1] Fiziksel diyagonal boyutta en az 2,5 inç ekrana sahip OLMALIDIR.
  • [ 7.1 .1.3/H-SR] Kullanıcılara ekran boyutunu değiştirme olanağı sağlamak için KESİNLİKLE TAVSİYE EDİLİR.(Ekran Yoğunluğu)

Elde taşınır cihaz uygulamaları, Configuration.isScreenHdr() aracılığıyla yüksek dinamik aralıklı ekranlar için destek talep ederse:

  • [ 7.1 .4.5/H-1-1] EGL_EXT_gl_colorspace_bt2020_pq , EGL_EXT_surface_SMPTE2086_metadata , EGL_EXT_surface_CTA861_3_metadata , VK_EXT_swapchain_colorspace ve VK_EXT_hdr_metadata uzantılarına yönelik desteğin reklamı ZORUNLUDUR .

Elde taşınır cihaz uygulamaları:

  • [ 7.1 .5/H-0-1] Yukarı akışlı Android açık kaynak kodu tarafından uygulanan eski uygulama uyumluluk modu desteğini içermelidir ZORUNLU. Yani, cihaz uygulamalarının uyumluluk modunun etkinleştirildiği tetikleyicileri veya eşikleri DEĞİŞTİRMEMELİ ve uyumluluk modunun davranışını DEĞİŞTİRMEMELİDİR.
  • [ 7.2 .1/H-0-1] Üçüncü taraf Giriş Yöntemi Düzenleyicisi (IME) uygulamaları için destek içermelidir ZORUNLU.
  • [ 7.2 .3/H-0-1] Ana Sayfa, Son Kullanılanlar ve Geri işlevlerini sağlamalıdır ZORUNLU.
  • [ 7.2 .3/H-0-2] Geri işlevinin ( KEYCODE_BACK ) hem normal hem de uzun basma olayını ön plandaki uygulamaya GÖNDERMELİDİR. Bu olayların sistem tarafından tüketilmemesi ZORUNLUDUR ve Android cihazının dışından (örn. Android cihazına bağlı harici donanım klavyesi) tetiklenebilir.
  • [ 7.2 .4/H-0-1] Dokunmatik ekran girişini desteklemelidir ZORUNLU.
  • [ 7.2 .4/H-SR] Kullanıcı tarafından seçilen yardım uygulamasını, başka bir deyişle VoiceInteractionService'i uygulayan uygulamayı veya ön plandaki etkinlik çalışmıyorsa KEYCODE_MEDIA_PLAY_PAUSE veya KEYCODE_HEADSETHOOK tuşuna uzun basıldığında ACTION_ASSIST işleyen bir etkinliği başlatmanız KESİNLİKLE ÖNERİLİR bu uzun basış olaylarını halledin.
  • [ 7.3 .1/H-SR] 3 eksenli bir ivmeölçer içermesi KESİNLİKLE TAVSİYE EDİLİR.

Taşınabilir cihaz uygulamaları 3 eksenli bir ivmeölçer içeriyorsa:

  • [ 7.3.1 /H-1-1] En az 100 Hz frekansa kadar olan olayları rapor edebilmelidir ZORUNLU.

Elde taşınır cihaz uygulamaları bir jiroskop içeriyorsa:

  • [ 7.3.4 /H-1-1] En az 100 Hz frekansa kadar olan olayları rapor edebilmelidir ZORUNLU.

Sesli arama yapabilen ve getPhoneType PHONE_TYPE_NONE dışında herhangi bir değeri gösterebilen elde taşınır cihaz uygulamaları:

  • [ 7.3 .8/H] Yakınlık sensörü OLMALIDIR.

Elde taşınır cihaz uygulamaları:

  • [ 7.3 .12/H-SR] Poz sensörünün 6 serbestlik derecesine sahip olarak desteklenmesi ÖNERİLİR.
  • [ 7.4 .3/H] Bluetooth ve Bluetooth LE desteğini içermelidir.

Elde taşınır cihaz uygulamaları tarifeli bir bağlantı içeriyorsa:

  • [ 7.4 .7/H-1-1] Veri tasarrufu modunu sağlaması ZORUNLUDUR.

Elde taşınır cihaz uygulamaları:

  • [ 7.6 .1/H-0-1] Uygulama özel verileri (aka "/data" bölümü) için en az 4 GB kalıcı depolama alanına sahip olması GEREKİR.
  • [ 7.6 .1/H-0-2] Çekirdek ve kullanıcı alanında 1 GB'den az bellek mevcut olduğunda ActivityManager.isLowRamDevice() için "true" değerini döndürmesi ZORUNLUDUR.

Elde taşınır cihaz uygulamaları yalnızca 32 bit ABI'yi desteklediğini bildirirse:

  • [ 7.6 .1/H-1-1] Varsayılan ekran qHD'ye kadar çerçeve arabellek çözünürlükleri kullanıyorsa (örn. FWVGA), çekirdek ve kullanıcı alanı için kullanılabilir bellek en az 416 MB OLMALIDIR.

  • [ 7.6 .1/H-2-1] Eğer varsayılan ekran HD+'ya kadar (örn. HD, WSVGA) çerçeve ara bellek çözünürlüklerini kullanıyorsa, çekirdek ve kullanıcı alanı tarafından kullanılabilen bellek en az 592 MB OLMALIDIR.

  • [ 7.6 .1/H-3-1] Varsayılan ekran FHD'ye kadar çerçeve arabellek çözünürlükleri kullanıyorsa (örn. WSXGA+) çekirdek ve kullanıcı alanı için kullanılabilir bellek en az 896 MB OLMALIDIR.

  • [ 7.6 .1/H-4-1] Varsayılan ekran QHD'ye kadar çerçeve arabellek çözünürlükleri kullanıyorsa (örn. QWXGA) çekirdek ve kullanıcı alanı için mevcut bellek en az 1344 MB OLMALIDIR.

Elde taşınır cihaz uygulamaları herhangi bir 64 bit ABI'yi (32 bit ABI ile veya 32 bit ABI olmadan) desteklediğini beyan ederse:

  • [ 7.6 .1/H-5-1] Varsayılan ekran qHD'ye kadar çerçeve arabellek çözünürlükleri kullanıyorsa (örn. FWVGA), çekirdek ve kullanıcı alanı için kullanılabilir bellek en az 816 MB OLMALIDIR.

  • [ 7.6 .1/H-6-1] Eğer varsayılan ekran HD+'a kadar (örn. HD, WSVGA) çerçeve ara bellek çözünürlüklerini kullanıyorsa, çekirdek ve kullanıcı alanı tarafından kullanılabilen bellek en az 944 MB OLMALIDIR.

  • [ 7.6 .1/H-7-1] Varsayılan ekran FHD'ye kadar çerçeve arabellek çözünürlükleri kullanıyorsa (örn. WSXGA+) çekirdek ve kullanıcı alanı için kullanılabilir bellek en az 1280 MB OLMALIDIR.

  • [ 7.6 .1/H-8-1] Varsayılan ekran QHD'ye kadar çerçeve arabellek çözünürlükleri kullanıyorsa (örn. QWXGA), çekirdek ve kullanıcı alanı için mevcut bellek en az 1824 MB OLMALIDIR.

Yukarıdaki "çekirdek ve kullanıcı alanı tarafından kullanılabilen bellek" ifadesinin, aygıt uygulamalarında çekirdeğin kontrolü altında olmayan radyo, video vb. donanım bileşenlerine halihazırda ayrılmış herhangi bir belleğe ek olarak sağlanan bellek alanını ifade ettiğini unutmayın.

Elde taşınır cihaz uygulamaları, çekirdek ve kullanıcı alanı için 1 GB'a eşit veya daha az bellek içeriyorsa, bunlar:

  • [ 7.6 .1/H-9-1] android.hardware.ram.low özellik işaretini bildirmesi ZORUNLUDUR.
  • [ 7.6 .1/H-9-2] Uygulama özel verileri (aka "/data" bölümü) için en az 1,1 GB kalıcı depolama alanına sahip olması GEREKİR.

Elde taşınır cihaz uygulamaları, çekirdek ve kullanıcı alanı için 1 GB'den fazla kullanılabilir bellek içeriyorsa, bunlar:

  • [ 7.6 .1/H-10-1] Uygulama özel verileri (diğer adıyla "/data" bölümü) için en az 4 GB kalıcı depolama alanına sahip olması GEREKİR.
  • özellik bayrağını android.hardware.ram.normal olarak bildirmeniz GEREKİR.

Elde taşınır cihaz uygulamaları:

  • [ 7.6 .2/H-0-1] 1 GiB'den küçük bir uygulama paylaşımlı depolama alanı SAĞLAMAMALIDIR.
  • [ 7.7 .1/H] Çevresel modu destekleyen bir USB bağlantı noktası içermelidir.

Elde taşınır cihaz uygulamaları çevre birimi modunu destekleyen bir USB bağlantı noktası içeriyorsa:

  • [ 7.7 .1/H-1-1] Android Açık Aksesuar (AOA) API'sini UYGULAMALIDIR.

Elde taşınır cihaz uygulamaları:

  • [ 7.8 .1/H-0-1] Bir mikrofon içermelidir ZORUNLU.
  • [ 7.8 .2/H-0-1] Bir ses çıkışına sahip olmalı ve android.hardware.audio.output olarak bildirilmelidir.

Elde taşınır cihaz uygulamaları, VR modunu desteklemek için tüm performans gereksinimlerini karşılayabiliyorsa ve buna yönelik desteği içeriyorsa:

  • [ 7.9 .1/H-1-1] android.hardware.vr.high_performance özellik işaretini bildirmesi ZORUNLUDUR.
  • [ 7.9 .1/H-1-2] android.app.Activity#setVrModeEnabled aracılığıyla VR uygulamaları tarafından etkinleştirilebilen android.service.vr.VrListenerService uygulayan bir uygulamayı içermelidir ZORUNLU.

2.2.2. Multimedya

Taşınabilir cihaz uygulamaları aşağıdaki ses kodlamasını desteklemelidir ZORUNLU:

  • [ 5.1 .1/H-0-1] AMR-NB
  • [ 5.1 .1/H-0-2] AMR-WB
  • [ 5.1 .1/H-0-3] MPEG-4 AAC Profili (AAC LC)
  • [ 5.1 .1/H-0-4] MPEG-4 HE AAC Profili (AAC+)
  • [ 5.1 .1/H-0-5] AAC ELD (geliştirilmiş düşük gecikmeli AAC)

Taşınabilir cihaz uygulamaları aşağıdaki ses kod çözmeyi desteklemelidir ZORUNLU:

  • [ 5.1 .2/H-0-1] AMR-NB
  • [ 5.1 .2/H-0-2] AMR-WB

Elde taşınır cihaz uygulamalarının aşağıdaki video kodlamayı desteklemesi ve bunu üçüncü taraf uygulamaların kullanımına sunması ZORUNLUDUR:

  • [ 5.2 /H-0-1] H.264 AVC
  • [ 5.2 /H-0-2] VP8

Taşınabilir cihaz uygulamaları aşağıdaki video kod çözmeyi desteklemelidir ZORUNLU:

  • [ 5.3 /H-0-1] H.264 AVC
  • [ 5.3 /H-0-2] H.265 HEVC
  • [ 5.3 /H-0-3] MPEG-4 SP
  • [ 5.3 /H-0-4] VP8
  • [ 5.3 /H-0-5] VP9

2.2.3. Yazılım

Elde taşınır cihaz uygulamaları:

  • [ 3.2.3.1 /H-0-1] ACTION_GET_CONTENT , ACTION_OPEN_DOCUMENT , ACTION_OPEN_DOCUMENT_TREE ve ACTION_CREATE_DOCUMENT amaçlarını SDK belgelerinde açıklandığı şekilde işleyen ve kullanıcıya DocumentsProvider API'sini kullanarak belge sağlayıcı verilerine erişme olanağı sağlayan bir uygulamaya sahip OLMALIDIR.
  • [ 3.4 .1/H-0-1] android.webkit.Webview API'sinin eksiksiz bir uygulamasını SAĞLAMALIDIR.
  • [ 3.4 .2/H-0-1] Genel kullanıcı web taraması için bağımsız bir Tarayıcı uygulaması içermelidir ZORUNLU.
  • [ 3.8 .1/H-SR] Kısayolların, widget'ların ve widgetFeatures'ın uygulama içi sabitlenmesini destekleyen bir varsayılan başlatıcının uygulanması KESİNLİKLE TAVSİYE EDİLİR.
  • [ 3.8 .1/H-SR] ShortcutManager API aracılığıyla üçüncü taraf uygulamalar tarafından sağlanan ek kısayollara hızlı erişim sağlayan bir varsayılan başlatıcının uygulanması KESİNLİKLE ÖNERİLİR.
  • [ 3.8 .1/H-SR] Uygulama simgeleri için rozetleri gösteren bir varsayılan başlatıcı uygulaması içermesi KESİNLİKLE TAVSİYE EDİLİR.
  • [ 3.8 .2/H-SR] Üçüncü taraf uygulama widget'larını desteklemeleri KESİNLİKLE ÖNERİR.
  • [ 3.8 .3/H-0-1] Üçüncü taraf uygulamaların, Notification ve NotificationManager API sınıfları aracılığıyla kullanıcıları önemli olaylar hakkında bilgilendirmesine izin vermesi ZORUNLUDUR.
  • [ 3.8 .3/H-0-2] Zengin bildirimleri desteklemelidir ZORUNLU.
  • [ 3.8 .3/H-0-3] Dikkat bildirimlerini desteklemelidir ZORUNLU.
  • [ 3.8 .3/H-0-4] Kullanıcının, uygulandığı şekliyle eylem düğmeleri veya kontrol paneli gibi kullanıcının sağladığı olanaklar aracılığıyla bildirimleri doğrudan kontrol etme (örneğin yanıtlama, erteleme, kapatma, engelleme) olanağı sağlayan bir bildirim gölgesi içermesi ZORUNLUDUR AOSP'de.
  • [ 3.8 .3/H-0-5] RemoteInput.Builder setChoices() aracılığıyla sağlanan seçenekleri bildirim gölgesinde GÖRÜNTÜLEMELİDİR.
  • [ 3.8 .3/H-SR] RemoteInput.Builder setChoices() aracılığıyla sağlanan ilk seçeneği ek kullanıcı etkileşimi olmadan bildirim gölgesinde görüntülemeniz KESİNLİKLE TAVSİYE EDİLİR.
  • [ 3.8 .3/H-SR] Kullanıcı bildirim gölgesindeki tüm bildirimleri genişlettiğinde RemoteInput.Builder setChoices() aracılığıyla sağlanan tüm seçeneklerin bildirim gölgesinde görüntülenmesi KESİNLİKLE TAVSİYE EDİLİR.
  • [ 3.8 .4/H-SR] Destek eylemini gerçekleştirecek bir asistanın cihaza uygulanması KESİNLİKLE TAVSİYE EDİLİR.

Elde taşınır cihaz uygulamaları Yardım eylemini destekliyorsa:

  • [ 3.8 .4/H-SR] Bölüm 7.2.3'te açıklandığı gibi destek uygulamasını başlatmak için belirlenen etkileşim olarak HOME tuşuna uzun basılması KESİNLİKLE TAVSİYE EDİLİR. Kullanıcının seçtiği yardım uygulamasını, başka bir deyişle VoiceInteractionService uygulayan uygulamayı veya ACTION_ASSIST amacını işleyen bir etkinliği başlatması GEREKİR.

Android Handheld cihaz uygulamaları kilit ekranını destekliyorsa:

  • [ 3.8 .10/H-1-1] Medya Bildirim Şablonu da dahil olmak üzere Kilit ekranı Bildirimlerini görüntülemelidir ZORUNLU.

Elde taşınır cihaz uygulamaları güvenli bir kilit ekranını destekliyorsa:

  • [ 3.9 /H-1-1] Android SDK belgelerinde tanımlanan cihaz yönetimi politikalarının tamamını UYGULAMALIDIR.
  • android.software.managed_users 3.9 /H-1-2] Aygıtın kendisini düşük RAM aygıtı olarak bildirecek veya dahili ( çıkarılabilir olmayan) depolamayı paylaşılan depolama olarak kullanın.

Elde taşınır cihaz uygulamaları:

  • [ 3.10 /H-0-1] Üçüncü taraf erişilebilirlik hizmetlerini desteklemelidir ZORUNLU.
  • [ 3.10 /H-SR] Açık talkback'te sağlanan Anahtar Erişimi ve TalkBack (önceden yüklenmiş Metin-konuşma motoru tarafından desteklenen diller için) erişilebilirlik hizmetleriyle karşılaştırılabilir veya bu işlevleri aşan erişilebilirlik hizmetlerinin cihaza önceden yüklenmesi ŞİDDETLE ÖNERİLİR kaynak projesi .
  • [ 3.11 /H-0-1] Üçüncü taraf TTS motorlarının kurulumunu desteklemelidir ZORUNLU.
  • [ 3.11 /H-SR] Cihazda mevcut dilleri destekleyen bir TTS motorunun dahil edilmesi KESİNLİKLE TAVSİYE EDİLİR.
  • [ 3.13 /H-SR] Hızlı Ayarlar Kullanıcı Arayüzü bileşeninin dahil edilmesi KESİNLİKLE TAVSİYE EDİLİR.

Android el tipi cihaz uygulamaları FEATURE_BLUETOOTH veya FEATURE_WIFI desteğini beyan ederse:

  • [ 3.16 /H-1-1] Yardımcı cihaz eşleştirme özelliğini desteklemesi ZORUNLUDUR.

2.2.4. Performans ve Güç

  • [ 8.1 /H-0-1] Tutarlı kare gecikmesi . Tutarsız kare gecikmesi veya karelerin oluşturulmasındaki gecikme, saniyede 5 kareden daha sık OLMAMALIDIR ve saniyede 1 karenin altında OLMALIDIR.
  • [ 8.1 /H-0-2] Kullanıcı arayüzü gecikmesi . Cihaz uygulamaları, Android Uyumluluk Test Paketi (CTS) tarafından tanımlanan 10 bin liste girişinin listesini 36 saniyeden kısa sürede kaydırarak düşük gecikmeli kullanıcı deneyimi SAĞLAMALIDIR.
  • [ 8.1 /H-0-3] Görev değiştirme . Birden fazla uygulama başlatıldığında, halihazırda çalışmakta olan bir uygulamanın başlatıldıktan sonra yeniden başlatılması 1 saniyeden kısa sürmesi GEREKİR.

Elde taşınır cihaz uygulamaları:

  • [ 8.2 /H-0-1] En az 5 MB/sn sıralı yazma performansı SAĞLAMALIDIR.
  • [ 8.2 /H-0-2] En az 0,5 MB/sn'lik rastgele yazma performansı SAĞLAMALIDIR.
  • [ 8.2 /H-0-3] En az 15 MB/sn sıralı okuma performansı ZORUNLUDUR.
  • [ 8.2 /H-0-4] En az 3,5 MB/sn'lik rastgele okuma performansı ZORUNLUDUR.

Elde taşınır cihaz uygulamaları, AOSP'de bulunan cihaz güç yönetimini iyileştirmeye yönelik özellikler içeriyorsa veya AOSP'de bulunan özellikleri genişletiyorsa:

  • [ 8.3 /H-1-1] Kullanıcıya pil tasarrufu özelliğini etkinleştirme ve devre dışı bırakma olanağı sağlamalıdır ZORUNLU.
  • [ 8.3 /H-1-2] Uygulama Bekleme ve Doze güç tasarrufu modlarından muaf tutulan tüm uygulamaları görüntülemek için kullanıcıya olanak sağlamalıdır ZORUNLU.

Elde taşınır cihaz uygulamaları:

  • [ 8.4 /H-0-1] Android Açık Kaynak Projesi sitesinde belgelendiği gibi, her donanım bileşeni için geçerli tüketim değerini ve bileşenlerin zaman içinde neden olduğu yaklaşık pil tüketimini tanımlayan bileşen başına bir güç profili SAĞLAMALIDIR.
  • [ 8.4 /H-0-2] Tüm güç tüketimi değerleri miliamper saat (mAh) cinsinden bildirilmelidir ZORUNLU.
  • [ 8.4 /H-0-3] Her işlemin UID'sine göre CPU güç tüketimini bildirmesi ZORUNLUDUR. Android Açık Kaynak Projesi, gereksinimi uid_cputime çekirdek modülü uygulaması aracılığıyla karşılar.
  • [ 8.4 /H-0-4] Bu güç kullanımını, uygulama geliştiricisinin adb shell dumpsys batterystats kabuk komutu aracılığıyla kullanılabilir hale getirmesi GEREKİR.
  • [ 8.4 /H] Donanım bileşeni güç kullanımını bir uygulamaya ilişkilendiremiyorsanız, donanım bileşeninin kendisine atfedilmesi GEREKİR.

Elde taşınır cihaz uygulamaları bir ekran veya video çıkışı içeriyorsa:

2.2.5. Güvenlik Modeli

Elde taşınır cihaz uygulamaları:

Taşınabilir cihaz uygulamaları güvenli bir kilit ekranını desteklediğinde:

  • [ 9.11 /H-1-1] Kullanıcının en kısa uyku zaman aşımını, yani kilit açık durumdan kilitli duruma geçiş süresini 15 saniye veya daha kısa olarak seçmesine izin vermelidir ZORUNLU.
  • [ 9.11 /H-1-2] Kullanıcıya bildirimleri gizleme ve 9.11.1 Güvenli Kilit Ekranı'nda açıklanan birincil kimlik doğrulama dışında tüm kimlik doğrulama biçimlerini devre dışı bırakma olanağı sağlamalıdır ZORUNLU. AOSP, kilitleme modu olarak gereksinimi karşılar.

2.3. Televizyon Gereksinimleri

Android Televizyon cihazı, yaklaşık 3 metre uzakta oturan kullanıcılar için ("arkaya yaslanan" veya "3 metrelik kullanıcı) dijital medyayı, filmleri, oyunları, uygulamaları ve/veya canlı TV'yi tüketmek için bir eğlence arayüzü olan bir Android cihaz uygulamasını ifade eder. arayüz").

Android cihaz uygulamaları, aşağıdaki kriterlerin tümünü karşılıyorsa Televizyon olarak sınıflandırılır:

  • Kullanıcıdan on metre uzağa oturabilecek, ekranda oluşturulan kullanıcı arayüzünü uzaktan kontrol etmek için bir mekanizma sağladık.
  • Çapraz uzunluğu 24 inçten daha büyük olan gömülü bir ekran görüntüsüne sahip olun VEYA ekran için VGA, HDMI, DisplayPort gibi bir video çıkış bağlantı noktası veya kablosuz bağlantı noktası ekleyin.

Bu bölümün geri kalanındaki ek gereksinimler, Android Televizyon cihazı uygulamalarına özeldir.

2.3.1. Donanım

Televizyon cihazı uygulamaları:

  • [ 7.2 .2/T-0-1] D-pad'i desteklemelidir.
  • [ 7.2 .3/T-0-1] Ana Sayfa ve Geri fonksiyonlarını sağlamalıdır ZORUNLU.
  • [ 7.2 .3/T-0-2] Geri işlevinin ( KEYCODE_BACK ) hem normal hem de uzun basma olayını ön plandaki uygulamaya GÖNDERMELİDİR.
  • [ 7.2 .6.1/T-0-1] Oyun kumandaları için destek içermeli ve android.hardware.gamepad özellik işaretini beyan etmelidir.
  • [ 7.2 .7/T] Kullanıcıların dokunmatik olmayan navigasyona ve temel navigasyon tuşları girişlerine erişebilecekleri bir uzaktan kumanda SAĞLAMALIDIR.

Televizyon cihazı uygulamaları bir jiroskop içeriyorsa:

  • [ 7.3.4 /T-1-1] En az 100 Hz frekansa kadar olan olayları rapor edebilmelidir ZORUNLU.

Televizyon cihazı uygulamaları:

  • [ 7.4 .3/T-0-1] Bluetooth ve Bluetooth LE'yi desteklemelidir ZORUNLU.
  • [ 7.6 .1/T-0-1] Uygulama özel verileri (diğer adıyla "/data" bölümü) için en az 4 GB kalıcı depolama alanına sahip olması GEREKİR.

Televizyon cihazı uygulamaları ana bilgisayar modunu destekleyen bir USB bağlantı noktası içeriyorsa:

  • [ 7.5 .3/T-1-1] Bu USB bağlantı noktası üzerinden bağlanan ancak her zaman bağlı olması gerekmeyen harici bir kamera desteği içermelidir ZORUNLU.

TV cihazı uygulamaları 32 bit ise:

  • [ 7.6 .1/T-1-1] Aşağıdaki yoğunluklardan herhangi birinin kullanılması durumunda çekirdek ve kullanıcı alanının kullanabileceği bellek en az 896 MB OLMALIDIR:

    • Küçük/normal ekranlarda 400 dpi veya üzeri
    • Büyük ekranlarda xhdpi veya üstü
    • Ekstra geniş ekranlarda tvdpi veya üstü

TV cihazı uygulamaları 64 bit ise:

  • [ 7.6 .1/T-2-1] Aşağıdaki yoğunluklardan herhangi birinin kullanılması durumunda çekirdek ve kullanıcı alanının kullanabileceği bellek en az 1280 MB OLMALIDIR:

    • Küçük/normal ekranlarda 400 dpi veya üzeri
    • Büyük ekranlarda xhdpi veya üstü
    • Ekstra geniş ekranlarda tvdpi veya üstü

Yukarıdaki "çekirdek ve kullanıcı alanı tarafından kullanılabilen bellek" ifadesinin, aygıt uygulamalarında çekirdeğin kontrolü altında olmayan radyo, video vb. donanım bileşenlerine halihazırda ayrılmış herhangi bir belleğe ek olarak sağlanan bellek alanını ifade ettiğini unutmayın.

Televizyon cihazı uygulamaları:

  • [ 7.8 .1/T] Bir mikrofon içermelidir.
  • [ 7.8 .2/T-0-1] Bir ses çıkışına sahip olmalı ve android.hardware.audio.output olarak bildirilmelidir.

2.3.2. Multimedya

Televizyon cihazı uygulamaları aşağıdaki ses kodlama formatlarını desteklemelidir ZORUNLU:

  • [ 5.1 /T-0-1] MPEG-4 AAC Profili (AAC LC)
  • [ 5.1 /T-0-2] MPEG-4 HE AAC Profili (AAC+)
  • [ 5.1 /T-0-3] AAC ELD (geliştirilmiş düşük gecikmeli AAC)

Televizyon cihazı uygulamaları aşağıdaki video kodlama formatlarını desteklemelidir ZORUNLU:

  • [ 5.2 /T-0-1] H.264
  • [ 5.2 /T-0-2] VP8

Televizyon cihazı uygulamaları:

  • [ 5.2 .2/T-SR] Saniyede 30 kare hızında 720p ve 1080p çözünürlüklü videoların H.264 kodlamasını desteklemesi KESİNLİKLE ÖNERİLİR.

Televizyon cihazı uygulamaları aşağıdaki video kod çözme formatlarını desteklemelidir ZORUNLU:

Televizyon cihazı uygulamalarının aşağıdaki video kod çözme formatlarını desteklemesi KESİNLİKLE TAVSİYE EDİLİR:

Televizyon cihazı uygulamaları, Bölüm 5.3.4'te ayrıntılı olarak belirtildiği gibi, aşağıdakilere kadar standart video kare hızlarında ve çözünürlüklerinde H.264 kod çözmeyi desteklemelidir ZORUNLU:

  • [ 5.3.4 .4/T-1-1] Basline Profili ile saniyede 60 kare HD 1080p
  • [ 5.3.4 .4/T-1-2] Ana Profil ile saniyede 60 kare hızında HD 1080p
  • [ 5.3.4 .4/T-1-3] Yüksek Profil Seviyesi 4.2 ile saniyede 60 karede HD 1080p

H.265 donanım kod çözücülere sahip televizyon cihazı uygulamaları, Bölüm 5.3.5'te ayrıntılı olarak belirtildiği gibi, aşağıdakilere kadar standart video kare hızlarında ve çözünürlüklerde H.265 kod çözmeyi desteklemelidir ZORUNLU:

  • [ 5.3.5 .4/T-1-1] Ana Profil Seviyesi 4.1 ile saniyede 60 karede HD 1080p

H.265 donanım kod çözücülere sahip Televizyon cihazı uygulamaları H.265 kod çözmeyi ve UHD kod çözme profilini destekliyorsa:

  • [ 5.3.5 .5/T-2-1] Main10 Seviye 5 Ana Katman profiliyle saniyede 60 karede UHD kod çözme profilini desteklemelidir ZORUNLU.

Televizyon cihazı uygulamaları, Bölüm 5.3.6'da ayrıntılı olarak açıklandığı gibi, aşağıdakilere kadar standart video kare hızlarında ve çözünürlüklerinde VP8 kod çözmeyi desteklemelidir ZORUNLU:

  • [ 5.3.6 .4/T-1-1] Saniyede 60 kare kod çözme profilinde HD 1080p

VP9 donanım kod çözücülere sahip televizyon cihazı uygulamaları, Bölüm 5.3.7'de ayrıntılı olarak açıklandığı gibi, aşağıdakilere kadar ve aşağıdakiler dahil olmak üzere standart video kare hızlarında ve çözünürlüklerinde VP9 kod çözmeyi desteklemelidir ZORUNLU:

  • [ 5.3.7 .4/T-1-1] Profil 0 (8 bit renk derinliği) ile saniyede 60 karede HD 1080p

VP9 donanım kod çözücülere sahip Televizyon cihazı uygulamaları VP9 kod çözmeyi ve UHD kod çözme profilini destekliyorsa:

  • [ 5.3.7 .5/T-2-1] Profil 0 (8 bit renk derinliği) ile saniyede 60 kare UHD kod çözme profilini desteklemelidir ZORUNLU.
  • [ 5.3.7 .5/T-2-1] Profil 2 (10 bit renk derinliği) ile saniyede 60 kare hızında UHD kod çözme profilini desteklemeleri KESİNLİKLE ÖNERİR.

Televizyon cihazı uygulamaları:

  • [ 5.5.3 /T-0-1] Sıkıştırılmış ses geçiş çıkışı (cihazda ses kod çözme işleminin yapılmadığı durum) hariç olmak üzere, desteklenen çıkışlarda sistem Ana Ses Düzeyi ve dijital ses çıkışı ses düzeyi zayıflaması desteğini içermelidir ZORUNLU.
  • [ 5.8 /T-0-1] Tüm kablolu ekranlar için 50Hz veya 60Hz yenileme hızıyla desteklenebilecek maksimum çözünürlüğü seçecek şekilde HDMI çıkış modunun ayarlanması GEREKİR.
  • [ 5.8 /T-SR] Tüm kablolu ekranlar için kullanıcı tarafından yapılandırılabilen bir HDMI yenileme hızı seçici sağlaması KESİNLİKLE TAVSİYE EDİLİR.
  • [ 5.8 /T-SR] Güvenli akışların eş zamanlı kod çözümünü desteklemesi KESİNLİKLE ÖNERİR. En azından iki buharın eş zamanlı kodunun çözülmesi ŞİDDETLE TAVSİYE EDİLİR.
  • [ 5.8 ] Tüm kablolu ekranlar için cihazın satıldığı bölgenin video yenileme hızına bağlı olarak HDMI çıkış modu yenileme hızını 50Hz veya 60Hz olarak ayarlamanız GEREKİR.

Televizyon cihazı uygulamaları UHD kod çözmeyi destekliyorsa ve harici ekran desteğine sahipse:

  • [ 5.8 /T-1-1] HDCP 2.2'yi desteklemelidir.

Televizyon cihazı uygulamaları UHD kod çözmeyi desteklemiyor ancak harici ekranları destekliyorsa:

  • [ 5.8 /T-2-1] HDCP 1.4'ü desteklemelidir

2.3.3. Yazılım

Televizyon cihazı uygulamaları:

  • [ 3 /T-0-1] android.software.leanback ve android.hardware.type.television özelliklerini beyan etmesi ZORUNLUDUR.
  • [ 3.4 .1/T-0-1] android.webkit.Webview API'sinin eksiksiz bir uygulamasını SAĞLAMALIDIR.

Android Television cihaz uygulamaları kilit ekranını destekliyorsa:

  • [ 3.8 .10/T-1-1] Medya Bildirim Şablonu da dahil olmak üzere Kilit ekranı Bildirimlerinin görüntülenmesi ZORUNLUDUR.

Televizyon cihazı uygulamaları:

  • [ 3.8 .14/T-SR] Resim içinde resim (PIP) modu çoklu pencereyi desteklemesi KESİNLİKLE ÖNERİR.
  • [ 3.10 /T-0-1] Üçüncü taraf erişilebilirlik hizmetlerini desteklemelidir ZORUNLU.
  • [ 3.10 /T-SR] Açık talkback'te sağlanan Anahtar Erişimi ve TalkBack (önceden yüklenmiş Metin-konuşma motoru tarafından desteklenen diller için) erişilebilirlik hizmetleriyle karşılaştırılabilir veya bu işlevleri aşan erişilebilirlik hizmetlerinin cihaza önceden yüklenmesi ŞİDDETLE ÖNERİLİR kaynak projesi .

Televizyon cihazı uygulamaları android.hardware.audio.output özelliğini bildirirse:

  • [ 3.11 /T-SR] Cihazda mevcut dilleri destekleyen bir TTS motorunun dahil edilmesi KESİNLİKLE TAVSİYE EDİLİR.
  • [ 3.11 /T-1-1] Üçüncü taraf TTS motorlarının kurulumunu desteklemelidir ZORUNLU.

Televizyon cihazı uygulamaları:

  • [ 3.12 /T-0-1] TV Giriş Çerçevesini desteklemelidir ZORUNLU.

2.3.4. Performans ve Güç

  • [ 8.1 /T-0-1] Tutarlı kare gecikmesi . Tutarsız kare gecikmesi veya karelerin oluşturulmasındaki gecikme, saniyede 5 kareden daha sık OLMAMALIDIR ve saniyede 1 karenin altında OLMALIDIR.
  • [ 8.2 /T-0-1] En az 5 MB/sn sıralı yazma performansı SAĞLAMALIDIR.
  • [ 8.2 /T-0-2] En az 0,5 MB/sn'lik rastgele yazma performansı SAĞLAMALIDIR.
  • [ 8.2 /T-0-3] En az 15MB/s sıralı okuma performansı ZORUNLUDUR.
  • [ 8.2 /T-0-4] En az 3,5 MB/sn'lik rastgele okuma performansı ZORUNLUDUR.

Televizyon cihazı uygulamaları, AOSP'de bulunan cihaz güç yönetimini iyileştirmeye yönelik özellikler içeriyorsa veya AOSP'de bulunan özellikleri genişletiyorsa:

  • [ 8.3 /T-1-1] Pil tasarrufu özelliğini etkinleştirmek ve devre dışı bırakmak için kullanıcıya olanak sağlamalıdır ZORUNLU.
  • [ 8.3 /T-1-2] Uygulama Bekleme ve Doze güç tasarrufu modlarından muaf tutulan tüm uygulamaları görüntülemek için kullanıcıya olanak sağlamalıdır ZORUNLU.

Televizyon cihazı uygulamaları:

  • [ 8.4 /T-0-1] Android Açık Kaynak Projesi sitesinde belgelendiği gibi, her donanım bileşeni için mevcut tüketim değerini ve bileşenlerin zaman içinde neden olduğu yaklaşık pil tüketimini tanımlayan bileşen başına bir güç profili sağlamalıdır ZORUNLU.
  • [ 8.4 /T-0-2] Tüm güç tüketimi değerleri miliamper saat (mAh) cinsinden bildirilmelidir ZORUNLU.
  • [ 8.4 /T-0-3] Her işlemin UID'sine göre CPU güç tüketimini bildirmesi ZORUNLUDUR. Android Açık Kaynak Projesi, gereksinimi uid_cputime çekirdek modülü uygulaması aracılığıyla karşılar.
  • [ 8.4 /T] Donanım bileşeni güç kullanımını bir uygulamaya ilişkilendiremiyorsanız, donanım bileşeninin kendisine atfedilmesi GEREKİR.
  • [ 8.4 /T-0-4] Bu güç kullanımını, uygulama geliştiricisinin adb shell dumpsys batterystats kabuk komutu aracılığıyla kullanılabilir hale getirmesi ZORUNLUDUR.

2.4. Gereksinimleri İzle

Android Watch cihazı, vücuda, belki de bileğe takılması amaçlanan bir Android cihaz uygulamasını ifade eder.

Android cihaz uygulamaları, aşağıdaki kriterlerin tümünü karşılıyorsa İzleme olarak sınıflandırılır:

  • Fiziksel diyagonal uzunluğu 1,1 ila 2,5 inç arasında olan bir ekrana sahip olun.
  • Vücuda takılabilecek mekanizmaya sahiptir.

Bu bölümün geri kalanındaki ek gereksinimler, Android Watch cihaz uygulamalarına özeldir.

2.4.1. Donanım

Cihaz uygulamalarını izleyin:

  • [ 7.1 .1.1/W-0-1] Fiziksel diyagonal boyutu 1,1 ila 2,5 inç aralığında olan bir ekrana sahip OLMALIDIR.

  • [ 7.2 .3/W-0-1] Kullanıcının Home işlevine ve UI_MODE_TYPE_WATCH dışında Geri işlevine sahip olması ZORUNLUDUR.

  • [ 7.2 .4/W-0-1] Dokunmatik ekran girişini desteklemelidir ZORUNLU.

  • [ 7.3 .1/W-SR] 3 eksenli bir ivmeölçer içermesi KESİNLİKLE TAVSİYE EDİLİR.

  • [ 7.4 .3/W-0-1] Bluetooth'u desteklemelidir.

  • [ 7.6 .1/W-0-1] Uygulama özel verileri (diğer adıyla "/data" bölümü) için en az 1 GB kalıcı depolama alanına sahip olması GEREKİR.

  • [ 7.6 .1/W-0-2] Çekirdek ve kullanıcı alanı için en az 416 MB belleğe sahip olması GEREKİR.

  • [ 7.8 .1/W-0-1] Bir mikrofon içermelidir ZORUNLU.

  • [ 7.8 .2/W] OLABİLİR ancak ses çıkışı OLMAMALIDIR.

2.4.2. Multimedya

Ek gereksinim yok.

2.4.3. Yazılım

Cihaz uygulamalarını izleyin:

  • [ 3 /W-0-1] android.hardware.type.watch özelliğini bildirmeniz ZORUNLUDUR.
  • [ 3 /W-0-2] uiMode = UI_MODE_TYPE_WATCH'u desteklemelidir ZORUNLU.

Cihaz uygulamalarını izleyin:

  • [ 3.8 .4/W-SR] Destek eylemini gerçekleştirecek bir asistanın cihaza uygulanması KESİNLİKLE TAVSİYE EDİLİR.

android.hardware.audio.output özellik işaretini bildiren cihaz uygulamalarını izleyin:

  • [ 3.10 /W-1-1] Üçüncü taraf erişilebilirlik hizmetlerini desteklemelidir ZORUNLU.
  • [ 3.10 /W-SR] Açık talkback'te sağlanan Anahtar Erişimi ve TalkBack (önceden yüklenmiş Metin-konuşma motoru tarafından desteklenen diller için) erişilebilirlik hizmetleriyle karşılaştırılabilir veya bu işlevleri aşan erişilebilirlik hizmetlerinin cihaza önceden yüklenmesi ŞİDDETLE ÖNERİLİR kaynak projesi .

Watch cihazı uygulamaları android.hardware.audio.output özelliğini bildirirse:

  • [ 3.11 /W-SR] Cihazda mevcut dilleri destekleyen bir TTS motorunun dahil edilmesi KESİNLİKLE TAVSİYE EDİLİR.

  • [ 3.11 /W-0-1] Üçüncü taraf TTS motorlarının kurulumunu desteklemelidir ZORUNLU.

2.4.4. Performans ve Güç

Watch cihazı uygulamaları, AOSP'de bulunan cihaz güç yönetimini iyileştirmeye yönelik özellikler içeriyorsa veya AOSP'de bulunan özellikleri genişletiyorsa:

  • [ 8.3 /W-SR] Kullanıcıya Uygulama Bekleme ve Doze güç tasarrufu modlarından muaf olan tüm uygulamaları görüntüleme olanağı sağlaması KESİNLİKLE TAVSİYE EDİLİR.
  • [ 8.3 /W-SR] Kullanıcıya pil tasarrufu özelliğini etkinleştirme ve devre dışı bırakma olanağı sağlaması KESİNLİKLE TAVSİYE EDİLİR.

Cihaz uygulamalarını izleyin:

  • [ 8.4 /W-0-1] Android Açık Kaynak Projesi sitesinde belgelendiği gibi, her donanım bileşeni için geçerli tüketim değerini ve bileşenlerin zaman içinde neden olduğu yaklaşık pil tüketimini tanımlayan bileşen başına bir güç profili SAĞLAMALIDIR.
  • [ 8.4 /W-0-2] Tüm güç tüketimi değerleri miliamper saat (mAh) cinsinden bildirilmelidir ZORUNLU.
  • [ 8.4 /W-0-3] Her işlemin UID'sine göre CPU güç tüketimini bildirmesi ZORUNLUDUR. Android Açık Kaynak Projesi, gereksinimi uid_cputime çekirdek modülü uygulaması aracılığıyla karşılar.
  • [ 8.4 /W-0-4] Bu güç kullanımını, uygulama geliştiricisinin adb shell dumpsys batterystats kabuk komutu aracılığıyla kullanılabilir hale getirmesi ZORUNLUDUR.
  • [ 8.4 /W] Donanım bileşeni güç kullanımını bir uygulamaya ilişkilendiremiyorsanız, donanım bileşeninin kendisine atfedilmesi GEREKLİDİR.

2.5. Otomotiv Gereksinimleri

Android Automotive uygulaması, sistemin bir kısmı veya tamamı ve/veya bilgi-eğlence işlevselliği için işletim sistemi olarak Android çalıştıran bir araç ana ünitesini ifade eder.

Android cihaz uygulamaları, android.hardware.type.automotive özelliğini bildiriyorsa veya aşağıdaki kriterlerin tümünü karşılıyorsa Otomotiv olarak sınıflandırılır.

  • Bir otomotiv aracının parçası olarak gömülüdür veya takılabilir.
  • Ana ekran olarak sürücü koltuğu sırasındaki bir ekranı kullanıyoruz.

Bu bölümün geri kalanındaki ek gereksinimler, Android Automotive cihaz uygulamalarına özeldir.

2.5.1. Donanım

Otomotiv cihaz uygulamaları:

  • [ 7.1 .1.1/A-0-1] Fiziksel diyagonal boyutta en az 6 inç ekrana sahip olması ZORUNLUDUR.
  • [ 7.1 .1.1/A-0-2] En az 750 dp x 480 dp ekran boyutu düzenine sahip OLMALIDIR.

  • [ 7.2 .3/A-0-1] Ana Sayfa işlevini sağlamalıdır ZORUNLU ve Geri ve Son işlevlerini de SAĞLAYABİLİR.

  • [ 7.2 .3/A-0-2] Geri işlevinin ( KEYCODE_BACK ) hem normal hem de uzun basma olayını ön plandaki uygulamaya GÖNDERMELİDİR.

  • [ 7.3 .1/A-SR] 3 eksenli bir ivmeölçer içermesi KESİNLİKLE TAVSİYE EDİLİR.

Otomotiv cihazı uygulamaları 3 eksenli bir ivmeölçer içeriyorsa:

Otomotiv cihaz uygulamaları bir jiroskop içeriyorsa:

  • [ 7.3.4 /A-1-1] En az 100 Hz frekansa kadar olan olayları rapor edebilmelidir ZORUNLU.

Otomotiv cihaz uygulamaları:

  • [ 7.3 .11/A-0-1] Mevcut donanımı SENSOR_TYPE_GEAR olarak sağlamalıdır ZORUNLU.

Otomotiv cihaz uygulamaları:

  • [ 7.3 .11.2/A-0-1] SENSOR_TYPE_NIGHT olarak tanımlanan gündüz/gece modunu desteklemelidir ZORUNLU.
  • [ 7.3 .11.2/A-0-2] SENSOR_TYPE_NIGHT bayrağının değeri, gösterge paneli gündüz/gece moduyla tutarlı olmalı ve ortam ışığı sensörü girdisine dayalı OLMALIDIR.
  • Temel ortam ışığı sensörü Fotometre ile aynı OLABİLİR.

  • [ 7.3 .11.4/A-0-1] SENSOR_TYPE_CAR_SPEED tarafından tanımlanan araç hızını sağlamalıdır ZORUNLU.

  • [ 7.3 .11.5/A-0-1] SENSOR_TYPE_PARKING_BRAKE tarafından tanımlandığı şekilde park freni durumunu SAĞLAMALIDIR.

  • [ 7.4 .3/A-0-1] Bluetooth'u desteklemelidir ve Bluetooth LE'yi desteklemelidir.

  • [ 7.4 .3/A-0-2] Android Automotive uygulamalarının aşağıdaki Bluetooth profillerini desteklemesi ZORUNLUDUR:
    • Eller Serbest Profili (HFP) üzerinden telefon görüşmesi.
    • Ses Dağıtım Profili (A2DP) üzerinden medya oynatma.
    • Uzaktan Kumanda Profili (AVRCP) üzerinden medya oynatma kontrolü.
    • Telefon Rehberi Erişim Profilini (PBAP) kullanarak kişi paylaşımı.
  • [ 7.4 .3/A-SR] Mesaj Erişim Profilini (MAP) desteklemesi KESİNLİKLE ÖNERİR.

  • [ 7.4 .5/A] Hücresel ağ tabanlı veri bağlantısı desteğini içermelidir GEREKLİ.

  • [ 7.4 .5/A] Sistem uygulamalarının kullanması gereken ağlar için Sistem API'si NetworkCapabilities#NET_CAPABILITY_OEM_PAID sabitini KULLANABİLİR.

  • [ 7.6 .1/A-0-1] Uygulama özel verileri (diğer adıyla "/data" bölümü) için en az 4 GB kalıcı depolama alanına sahip olması GEREKİR.

Otomotiv cihaz uygulamaları:

  • [ 7.6 .1/A] Veri bölümünü, örneğin f2fs dosya sistemini kullanarak, flash depolamada gelişmiş performans ve uzun ömür sağlayacak şekilde biçimlendirmelidir GEREKLİ.

Otomotiv cihazı uygulamaları, dahili çıkarılabilir olmayan depolamanın bir kısmı aracılığıyla paylaşılan harici depolama sağlıyorsa:

  • [ 7.6 .1/A-SR] Örneğin SDCardFS kullanılarak harici depolamada gerçekleştirilen işlemlerde G/Ç yükünü azaltmak KESİNLİKLE ÖNERİR.

Otomotiv cihazı uygulamaları 32 bit ise:

  • [ 7.6 .1/A-1-1] Aşağıdaki yoğunluklardan herhangi birinin kullanılması durumunda çekirdek ve kullanıcı alanının kullanabileceği bellek en az 512 MB OLMALIDIR:

    • Küçük/normal ekranlarda 280 dpi veya daha düşük
    • Ekstra geniş ekranlarda ldpi veya daha düşük
    • Büyük ekranlarda mdpi veya daha düşük
  • [ 7.6 .1/A-1-2] Aşağıdaki yoğunluklardan herhangi birinin kullanılması durumunda çekirdek ve kullanıcı alanının kullanabileceği bellek en az 608 MB OLMALIDIR:

    • Küçük/normal ekranlarda xhdpi veya üstü
    • Büyük ekranlarda hdpi veya üstü
    • Ekstra geniş ekranlarda mdpi veya üstü
  • [ 7.6 .1/A-1-3] Aşağıdaki yoğunluklardan herhangi birinin kullanılması durumunda çekirdek ve kullanıcı alanının kullanabileceği bellek en az 896 MB OLMALIDIR:

    • Küçük/normal ekranlarda 400 dpi veya üzeri
    • Büyük ekranlarda xhdpi veya üstü
    • Ekstra geniş ekranlarda tvdpi veya üstü
  • [ 7.6 .1/A-1-4] Aşağıdaki yoğunluklardan herhangi birinin kullanılması durumunda çekirdek ve kullanıcı alanının kullanabileceği bellek en az 1344 MB OLMALIDIR:

    • Küçük/normal ekranlarda 560dpi veya üzeri
    • Büyük ekranlarda 400 dpi veya daha yüksek
    • Ekstra geniş ekranlarda xhdpi veya üstü

Otomotiv cihazı uygulamaları 64 bit ise:

  • [ 7.6 .1/A-2-1] Aşağıdaki yoğunluklardan herhangi birinin kullanılması durumunda çekirdek ve kullanıcı alanının kullanabileceği bellek en az 816 MB OLMALIDIR:

    • Küçük/normal ekranlarda 280 dpi veya daha düşük
    • Ekstra geniş ekranlarda ldpi veya daha düşük
    • Büyük ekranlarda mdpi veya daha düşük
  • [ 7.6 .1/A-2-2] Aşağıdaki yoğunluklardan herhangi birinin kullanılması durumunda çekirdek ve kullanıcı alanının kullanabileceği bellek en az 944 MB OLMALIDIR:

    • Küçük/normal ekranlarda xhdpi veya üstü
    • Büyük ekranlarda hdpi veya üstü
    • Ekstra geniş ekranlarda mdpi veya üstü
  • [ 7.6 .1/A-2-3] Aşağıdaki yoğunluklardan herhangi birinin kullanılması durumunda çekirdek ve kullanıcı alanının kullanabileceği bellek en az 1280 MB OLMALIDIR:

    • Küçük/normal ekranlarda 400 dpi veya üzeri
    • Büyük ekranlarda xhdpi veya üstü
    • Ekstra geniş ekranlarda tvdpi veya üstü
  • [ 7.6 .1/A-2-4] Aşağıdaki yoğunluklardan herhangi birinin kullanılması durumunda çekirdek ve kullanıcı alanının kullanabileceği bellek en az 1824 MB OLMALIDIR:

    • Küçük/normal ekranlarda 560dpi veya üzeri
    • Büyük ekranlarda 400 dpi veya daha yüksek
    • Ekstra geniş ekranlarda xhdpi veya üstü

Yukarıdaki "çekirdek ve kullanıcı alanı tarafından kullanılabilen bellek" ifadesinin, aygıt uygulamalarında çekirdeğin kontrolü altında olmayan radyo, video vb. donanım bileşenlerine halihazırda ayrılmış herhangi bir belleğe ek olarak sağlanan bellek alanını ifade ettiğini unutmayın.

Otomotiv cihaz uygulamaları:

  • [ 7.7 .1/A] Çevresel modu destekleyen bir USB bağlantı noktası içermelidir.

Otomotiv cihaz uygulamaları:

  • [ 7.8 .1/A-0-1] Bir mikrofon içermesi ZORUNLUDUR.

Otomotiv cihaz uygulamaları:

  • [ 7.8 .2/A-0-1] Bir ses çıkışına sahip olmalı ve android.hardware.audio.output olarak bildirilmelidir.

2.5.2. Multimedya

Otomotiv cihaz uygulamalarının aşağıdaki ses kodlamasını desteklemesi ZORUNLUdur:

  • [ 5.1 /A-0-1] MPEG-4 AAC Profili (AAC LC)
  • [ 5.1 /A-0-2] MPEG-4 HE AAC Profili (AAC+)
  • [ 5.1 /A-0-3] AAC ELD (geliştirilmiş düşük gecikmeli AAC)

Otomotiv cihaz uygulamalarının aşağıdaki video kodlamasını desteklemesi ZORUNLUdur:

  • [ 5.2 /A-0-1] H.264 AVC
  • [ 5.2 /A-0-2] VP8

Otomotiv cihaz uygulamalarının aşağıdaki video kod çözmeyi desteklemesi ZORUNLUdur:

  • [ 5.3 /A-0-1] H.264 AVC
  • [ 5.3 /A-0-2] MPEG-4 SP
  • [ 5.3 /A-0-3] VP8
  • [ 5.3 /A-0-4] VP9

Otomotiv cihaz uygulamalarının aşağıdaki video kod çözmeyi desteklemesi KESİNLİKLE TAVSİYE EDİLİR:

  • [ 5.3 /A-SR] H.265 HEVC

2.5.3. Yazılım

Otomotiv cihaz uygulamaları:

  • [ 3 /A-0-1] android.hardware.type.automotive özelliğini bildirmeniz ZORUNLUDUR.

  • [ 3 /A-0-2] uiMode = UI_MODE_TYPE_CAR desteklemelidir ZORUNLU.

  • [ 3 /A-0-3] android.car.* ad alanındaki tüm genel API'leri desteklemelidir ZORUNLU.

  • [ 3.4 .1/A-0-1] android.webkit.Webview API'sinin eksiksiz bir uygulamasını SAĞLAMALIDIR.

  • [ 3.8 .3/A-0-1] Üçüncü taraf uygulamalar tarafından istendiğinde Notification.CarExtender API'sini kullanan bildirimlerin GÖRÜNTÜLENMESİ ZORUNLUDUR.

  • [ 3.8 .4/A-SR] Destek eylemini gerçekleştirecek bir asistanın cihaza uygulanması Kesinlikle Tavsiye Edilir.

  • [ 3.13 /A-SR] Hızlı Ayarlar Kullanıcı Arayüzü bileşeninin dahil edilmesi KESİNLİKLE TAVSİYE EDİLİR.

Otomotiv cihaz uygulamaları bas-konuş düğmesi içeriyorsa:

  • [ 3.8 .4/A-1-1] Kullanıcı tarafından seçilen destek uygulamasını, başka bir deyişle VoiceInteractionService uygulayan uygulamayı başlatmak için belirlenmiş etkileşim olarak bas-konuş düğmesine kısa bir basış kullanılması ZORUNLUDUR.

Otomotiv cihaz uygulamaları:

  • [ 3.14 /A-0-1] Bölüm 3.14'te açıklandığı gibi medya API'lerini kullanan üçüncü taraf uygulamaları desteklemek için bir kullanıcı arayüzü çerçevesi içermelidir ZORUNLU.

2.5.4. Performans ve Güç

Otomotiv cihaz uygulamaları, AOSP'de bulunan cihaz güç yönetimini iyileştirmeye yönelik özellikler içeriyorsa veya AOSP'de bulunan özellikleri genişletiyorsa:

  • [ 8.3 /A-1-1] Kullanıcıya pil tasarrufu özelliğini etkinleştirme ve devre dışı bırakma olanağı SAĞLAMALIDIR.
  • [ 8.3 /A-1-2] Uygulama Bekleme ve Doze güç tasarrufu modlarından muaf tutulan tüm uygulamaları görüntülemek için kullanıcıya olanak sağlamalıdır ZORUNLU.

Otomotiv cihaz uygulamaları:

  • [ 8.2 /A-0-1] İstatistiklerin Sistem API'si android.car.storagemonitoring.CarStorageMonitoringManager aracılığıyla geliştiricilere sunulması için her işlemin UID'si başına kalıcı depolamaya okunan ve yazılan bayt sayısını bildirmesi GEREKLİdir. Android Açık Kaynak Projesi, gereksinimi uid_sys_stats çekirdek modülü aracılığıyla karşılar.
  • [ 8.4 /A-0-1] Android Açık Kaynak Projesi sitesinde belgelendiği gibi, her donanım bileşeni için geçerli tüketim değerini ve bileşenlerin zaman içinde neden olduğu yaklaşık pil tüketimini tanımlayan bileşen başına bir güç profili SAĞLAMALIDIR.
  • [ 8.4 /A-0-2] Tüm güç tüketimi değerleri miliamper saat (mAh) cinsinden bildirilmelidir ZORUNLU.
  • [ 8.4 /A-0-3] Her işlemin UID'sine göre CPU güç tüketimini rapor etmesi ZORUNLUDUR. Android Açık Kaynak Projesi, gereksinimi uid_cputime çekirdek modülü uygulaması aracılığıyla karşılar.
  • [ 8.4 /A] Donanım bileşeni güç kullanımını bir uygulamaya bağlayamıyorsanız, donanım bileşeninin kendisine atfedilmesi GEREKLİDİR.
  • [ 8.4 /A-0-4] Bu güç kullanımını, uygulama geliştiricisinin adb shell dumpsys batterystats kabuk komutu aracılığıyla kullanılabilir hale getirmesi ZORUNLUDUR.

2.5.5. Güvenlik Modeli

Otomotiv cihaz uygulamaları birden fazla kullanıcıyı destekliyorsa:

  • [ 9.5 /A-1-1] Kullanıcının oturum açmasına gerek kalmadan araç sistemi tarafından sağlanan tüm işlevlere izin veren bir misafir hesabı içermelidir ZORUNLU.

Otomotiv cihaz uygulamaları güvenli bir kilit ekranını destekliyorsa:

  • [ 9.9 .2/A-1-1] Kullanıcıya özel kimlik doğrulama anahtarları başına şifrelemeyi desteklemelidir ZORUNLU. Dosya Tabanlı Şifreleme (FBE) bunu yapmanın bir yoludur.

Otomotiv cihaz uygulamaları:

  • [ 9.14 /A-0-1] Android çerçeve araç alt sistemlerinden gelen mesajların geçidi tutulması ZORUNLUDUR; örneğin, izin verilen mesaj türlerini ve mesaj kaynaklarını izin verilenler listesine eklemek.
  • [ 9.14 /A-0-2] Android çerçevesinden veya üçüncü taraf uygulamalarından gelen hizmet reddi saldırılarına karşı izlenmelidir. Bu, araç alt sistemlerinin arızalanmasına neden olabilecek şekilde araç ağını trafikle dolduran kötü amaçlı yazılımlara karşı koruma sağlar.

2.6. Tablet Gereksinimleri

Android Tablet cihazı, aşağıdaki kriterlerin tümünü karşılayan bir Android cihaz uygulamasını ifade eder:

  • Genellikle iki elle tutularak kullanılır.
  • Kapaklı veya dönüştürülebilir bir konfigürasyona sahip değildir.
  • Cihazla birlikte kullanılan herhangi bir fiziksel klavye uygulamasının standart bir bağlantı aracılığıyla bağlanması GEREKİR.
  • Pil gibi hareket kabiliyeti sağlayan bir güç kaynağına sahiptir.
  • 7 ila 18 inç aralığında fiziksel çapraz ekran boyutuna sahiptir.

Tablet cihaz uygulamaları, el tipi cihaz uygulamalarına benzer gereksinimlere sahiptir. İstisnalar bu bölümde ve * ile belirtilmiştir ve bu bölümde referans olarak belirtilmiştir.

2.4.1. Donanım

Ekran boyutu

  • [ 7.1 .1.1/Tab-0-1] 7 ila 18 inç aralığında bir ekrana sahip OLMALIDIR.

Minimum Bellek ve Depolama (Bölüm 7.6.1)

Elde taşınan gereksinimlerde küçük/normal ekranlar için listelenen ekran yoğunlukları tabletler için geçerli değildir.

USB çevre birimi modu (Bölüm 7.7.1)

Tablet cihaz uygulamaları çevre birimi modunu destekleyen bir USB bağlantı noktası içeriyorsa:

  • [ 7.7.1 /Tab] Android Açık Aksesuar (AOA) API'sini UYGULAYABİLİR.

Sanal Gerçeklik Modu (Bölüm 7.9.1)

Sanal Gerçeklik Yüksek Performansı (Bölüm 7.9.2)

Sanal gerçeklik gereklilikleri tabletler için geçerli değildir.

3. Yazılım

3.1. Yönetilen API Uyumluluğu

Yönetilen Dalvik bayt kodu yürütme ortamı, Android uygulamaları için birincil araçtır. Android uygulama programlama arayüzü (API), yönetilen çalışma zamanı ortamında çalışan uygulamalara sunulan Android platformu arayüzleri kümesidir.

Cihaz uygulamaları:

  • [C-0-1] Android SDK tarafından kullanıma sunulan herhangi bir belgelenmiş API'nin veya yukarı akış Android kaynak kodunda "@SystemApi" işaretçisiyle süslenmiş herhangi bir API'nin tüm belgelenmiş davranışları da dahil olmak üzere eksiksiz uygulamalarını SAĞLAMALIDIR.

  • [C-0-2] TestApi ek açıklamasıyla (@TestApi) işaretlenen tüm sınıfları, yöntemleri ve ilgili öğeleri desteklemeli/korumalı ZORUNLU.

  • [C-0-3] Bu Uyumluluk Tanımında özellikle izin verilen durumlar dışında, yönetilen API'leri atlamamalı, API arayüzlerini veya imzalarını değiştirmemeli, belgelenen davranıştan sapmamalı veya işlem yapılmayan işlemleri içermemelidir.

  • [C-0-4] Android'in API'leri içerdiği bazı donanım özellikleri çıkarıldığında bile API'leri mevcut tutmalı ve makul bir şekilde davranmalıdır ZORUNLU. Bu senaryoya özel gereksinimler için bölüm 7'ye bakın.

  • [C-0-5] SDK belgelerinde açıklandığı gibi, @hidden ek açıklamasıyla süslenmiş ancak @SystemAPI veya @TestApi ile değil, Android ad alanındaki API'ler olarak tanımlanan gizli API'lerin 3. taraf uygulama kullanımını kısıtlaması ZORUNLUDUR ve AOSP'deki uygun API düzeyi şubesi için prebuilts/runtime/appcompat/ yolundaki geçici liste ve red listesi dosyaları aracılığıyla sağlanan aynı kısıtlı listelerdeki her bir gizli API ile birlikte gönderilir. Ancak onlar:

    • MAYIS, eğer gizli bir API yoksa veya cihaz uygulamasında farklı şekilde uygulanmışsa, gizli API'yi red listesine taşıyın veya tüm kısıtlı listelerden çıkarın.
    • MAYIS, eğer AOSP'de gizli bir API mevcut değilse, gizli API'yi kısıtlı listelerden herhangi birine ekleyebilirsiniz.
    • Gizli bir API'yi kısıtlı bir listeden, izin verilenler listesi dışında daha az kısıtlayıcı bir listeye taşıyan dinamik bir güncelleme mekanizması uygulayabilir.

3.1.1. Android Uzantıları

Android, aynı API düzeyi sürümünü korurken yönetilen API'leri genişletme desteğini içerir.

  • [C-0-1] Android cihaz uygulamalarının, hem paylaşılan kitaplık ExtShared hem de hizmetler ExtServices AOSP uygulamasını, her API düzeyi başına izin verilen minimum sürümlerden daha yüksek veya bu sürümlere eşit sürümlerle önceden yüklemesi ZORUNLUDUR. Örneğin, API düzeyi 24'ü çalıştıran Android 7.0 cihaz uygulamalarının en az sürüm 1'i içermesi ZORUNLUDUR.

3.1.2. Android Kitaplığı

Apache HTTP istemcisinin kullanımdan kaldırılması nedeniyle cihaz uygulamaları:

  • [C-0-1] org.apache.http.legacy kitaplığını önyükleme sınıfı yoluna YERLEŞTİRMEMELİDİR.
  • [C-0-2] org.apache.http.legacy kitaplığını yalnızca uygulama aşağıdaki koşullardan birini karşıladığında uygulama sınıf yoluna EKLEMELİDİR:
    • API düzeyi 28 veya daha düşükünü hedefler.
    • Bildiriminde, <uses-library> öğesinin android:name niteliğini org.apache.http.legacy olarak ayarlayarak kitaplığa ihtiyaç duyduğunu bildirir.

AOSP uygulaması bu gereksinimleri karşılar.

3.2. Yazılım API Uyumluluğu

Bölüm 3.1'deki yönetilen API'lere ek olarak Android ayrıca, uygulama derleme zamanında uygulanamayan Android uygulamalarının amaçları, izinleri ve benzer yönleri gibi önemli bir yalnızca çalışma zamanına yönelik "yumuşak" API içerir.

3.2.1. İzinler

  • [C-0-1] Cihaz uygulayıcılarının , İzin referans sayfasında belgelendiği şekilde tüm izin sabitlerini desteklemesi ve uygulaması ZORUNLUDUR. Bölüm 9'un Android güvenlik modeliyle ilgili ek gereksinimleri listelediğini unutmayın.

3.2.2. Parametreleri Oluştur

Android API'leri, android.os.Build sınıfında mevcut cihazı tanımlaması amaçlanan bir dizi sabit içerir.

  • [C-0-1] Cihaz uygulamalarında tutarlı, anlamlı değerler sağlamak için aşağıdaki tablo, cihaz uygulamalarının uyması GEREKEN bu değerlerin formatlarına ilişkin ek kısıtlamalar içermektedir.
Parametre Detaylar
VERSİYON.REEASE Şu anda çalışmakta olan Android sisteminin insan tarafından okunabilir biçimdeki sürümü. Bu alanın 9'da tanımlanan dize değerlerinden birine sahip olması ZORUNLUDUR.
VERSION.SDK Şu anda çalışmakta olan Android sisteminin, üçüncü taraf uygulama kodunun erişebileceği bir biçimdeki sürümü. Android 9 için bu alanın 9_INT tamsayı değerine sahip olması ZORUNLUDUR.
VERSION.SDK_INT Şu anda çalışmakta olan Android sisteminin, üçüncü taraf uygulama kodunun erişebileceği bir biçimdeki sürümü. Android 9 için bu alanın 9_INT tamsayı değerine sahip olması ZORUNLUDUR.
SÜRÜM.ARTIMLI Cihaz uygulayıcısı tarafından seçilen ve halihazırda çalışmakta olan Android sisteminin belirli yapısını insan tarafından okunabilir biçimde belirten bir değer. Bu değer, son kullanıcılara sunulan farklı yapılar için yeniden KULLANILMAMALIDIR. Bu alanın tipik bir kullanımı, yapıyı oluşturmak için hangi yapı numarasının veya kaynak kontrol değişikliği tanımlayıcısının kullanıldığını belirtmektir. Bu alanın spesifik formatına ilişkin herhangi bir gereklilik yoktur, ancak boş veya boş dize ("") OLMAMALIDIR.
PANO Cihaz tarafından kullanılan belirli dahili donanımı tanımlayan, cihaz uygulayıcısı tarafından seçilen, insan tarafından okunabilir formatta bir değer. Bu alanın olası bir kullanımı, cihaza güç veren kartın özel revizyonunu belirtmektir. Bu alanın değeri 7 bit ASCII olarak kodlanabilir ve "^[a-zA-Z0-9_-]+$" normal ifadesiyle eşleşmelidir ZORUNLU.
MARKA Son kullanıcılar tarafından bilinen, cihazla ilişkili marka adını yansıtan bir değer. İnsan tarafından okunabilir formatta OLMALIDIR ve cihazın üreticisini veya cihazın pazarlandığı şirket markasını temsil etmelidir. Bu alanın değeri 7 bit ASCII olarak kodlanabilir ve "^[a-zA-Z0-9_-]+$" normal ifadesiyle eşleşmelidir ZORUNLU.
DESTEKLENEN_ABIS Yerel kodun talimat setinin adı (CPU türü + ABI kuralı). Bkz. bölüm 3.3. Yerel API Uyumluluğu
SUPPORTED_32_BIT_ABIS Yerel kodun talimat setinin adı (CPU türü + ABI kuralı). Bkz. bölüm 3.3. Yerel API Uyumluluğu
SUPPORTED_64_BIT_ABIS Yerel kodun ikinci komut kümesinin adı (CPU türü + ABI kuralı). Bkz. bölüm 3.3. Yerel API Uyumluluğu
CPU_ABI Yerel kodun talimat setinin adı (CPU türü + ABI kuralı). Bkz. bölüm 3.3. Yerel API Uyumluluğu
CPU_ABI2 Yerel kodun ikinci komut kümesinin adı (CPU türü + ABI kuralı). Bkz. bölüm 3.3. Yerel API Uyumluluğu
CİHAZ Cihazın donanım özelliklerinin konfigürasyonunu ve endüstriyel tasarımını tanımlayan geliştirme adını veya kod adını içeren, cihaz uygulayıcısı tarafından seçilen bir değer. Bu alanın değeri 7 bit ASCII olarak kodlanabilir ve "^[a-zA-Z0-9_-]+$" normal ifadesiyle eşleşmelidir ZORUNLU. Bu cihaz adı ürünün kullanım ömrü boyunca DEĞİŞMEMELİDİR.
PARMAK İZİ Bu yapıyı benzersiz şekilde tanımlayan bir dize. Makul düzeyde insan tarafından okunabilir OLMALIDIR. Bu şablona uyması GEREKİR:

$(MARKA)/$(ÜRÜN)/
$(DEVICE):$(VERSION.RELEASE)/$(ID)/$(VERSION.INCREMENTAL):$(TYPE)/$(TAGS)

Örneğin:

acme/ürünüm/
cihazım:9/LMYXX/3359:kullanıcı hata ayıklama/test anahtarları

Parmak izi boşluk karakterleri İÇERMEMELİDİR. Yukarıdaki şablonda yer alan diğer alanlarda boşluk karakterleri varsa, bunların yapı parmak izinde alt çizgi ("_") karakteri gibi başka bir karakterle değiştirilmesi GEREKİR. Bu alanın değeri 7 bitlik ASCII olarak kodlanabilir OLMALIDIR.

DONANIM Donanımın adı (çekirdek komut satırından veya /proc'tan). Makul düzeyde insan tarafından okunabilir OLMALIDIR. Bu alanın değeri 7 bit ASCII olarak kodlanabilir ve "^[a-zA-Z0-9_-]+$" normal ifadesiyle eşleşmelidir ZORUNLU.
EV SAHİBİ Derlemenin oluşturulduğu ana bilgisayarı, insanlar tarafından okunabilir biçimde benzersiz şekilde tanımlayan bir dize. Bu alanın spesifik formatına ilişkin herhangi bir gereklilik yoktur, ancak boş veya boş dize ("") OLMAMALIDIR.
İD Cihaz uygulayıcısı tarafından belirli bir yayına atıfta bulunmak üzere seçilen, insan tarafından okunabilir formatta bir tanımlayıcı. Bu alan android.os.Build.VERSION.INCREMENTAL ile aynı olabilir, ancak son kullanıcıların yazılım yapıları arasında ayrım yapması için yeterince anlamlı bir değer OLMALIDIR. Bu alanın değeri 7 bit ASCII olarak kodlanabilir ve "^[a-zA-Z0-9._-]+$" normal ifadesiyle eşleşmelidir ZORUNLU.
ÜRETİCİ FİRMA Ürünün Orijinal Ekipman Üreticisinin (OEM) ticari adı. Bu alanın spesifik formatına ilişkin herhangi bir gereklilik yoktur, ancak boş veya boş dize ("") OLMAMALIDIR. Bu alan ürünün kullanım ömrü boyunca DEĞİŞMEMELİDİR.
MODELİ Cihaz uygulayıcısı tarafından seçilen ve son kullanıcının bildiği cihazın adını içeren bir değer. Bu, cihazın pazarlandığı ve son kullanıcılara satıldığı adla aynı OLMALIDIR. Bu alanın spesifik formatına ilişkin herhangi bir gereklilik yoktur, ancak boş veya boş dize ("") OLMAMALIDIR. Bu alan ürünün kullanım ömrü boyunca DEĞİŞMEMELİDİR.
ÜRÜN Cihaz uygulayıcısı tarafından seçilen ve aynı marka içinde benzersiz olması gereken belirli bir ürünün (SKU) geliştirme adını veya kod adını içeren bir değer. İnsan tarafından okunabilir OLMALIDIR ancak son kullanıcıların görüntülemesi amaçlanmamıştır. Bu alanın değeri 7 bit ASCII olarak kodlanabilir ve "^[a-zA-Z0-9_-]+$" normal ifadesiyle eşleşmelidir ZORUNLU. Bu ürün adı, ürünün kullanım ömrü boyunca DEĞİŞMEMELİDİR.
SERİ "BİLİNMİYOR" ifadesini döndürmesi GEREKİR.
ETİKETLER Yapıyı daha da ayırt eden, cihaz uygulayıcısı tarafından seçilen virgülle ayrılmış etiket listesi. Bu alanın üç tipik Android platformu imzalama yapılandırmasına karşılık gelen değerlerden birine sahip olması ZORUNLUDUR: sürüm anahtarları, geliştirme anahtarları, test anahtarları.
ZAMAN Derlemenin gerçekleştiği zamanın zaman damgasını temsil eden bir değer.
TİP Yapının çalışma zamanı yapılandırmasını belirten, cihaz uygulayıcısı tarafından seçilen bir değer. Bu alanın üç tipik Android çalışma zamanı yapılandırmasına karşılık gelen değerlerden birine sahip olması ZORUNLUDUR: user, userdebug veya eng.
KULLANICI Derlemeyi oluşturan kullanıcının (veya otomatik kullanıcının) adı veya kullanıcı kimliği. Bu alanın spesifik formatına ilişkin herhangi bir gereklilik yoktur, ancak boş veya boş dize ("") OLMAMALIDIR.
SECURITY_PATCH Bir yapının güvenlik yaması düzeyini gösteren bir değer. Yapının, belirlenen Android Kamu Güvenliği Bülteni aracılığıyla açıklanan sorunlardan herhangi birine karşı hiçbir şekilde savunmasız olmadığını belirtmesi ZORUNLUDUR. [YYYY-AA-GG] biçiminde olması ve Android Kamu Güvenliği Bülteni veya Android Güvenlik Danışma Belgesi'nde belgelenen tanımlı bir dizeyle (örneğin, "2015-11-01") eşleşmesi GEREKİR.
BASE_OS Android Kamu Güvenliği Bülteni'nde sağlanan yamalar dışında bu yapıyla aynı olan yapının PARMAK İZİ parametresini temsil eden bir değer. Doğru değeri bildirmesi GEREKİR ve eğer böyle bir yapı yoksa boş bir dize ("") bildirin.
ÖNYÜKLEYİCİ Cihazda kullanılan belirli dahili önyükleyici sürümünü insan tarafından okunabilir biçimde tanımlayan, cihaz uygulayıcısı tarafından seçilen bir değer. Bu alanın değeri 7 bit ASCII olarak kodlanabilir ve "^[a-zA-Z0-9._-]+$" normal ifadesiyle eşleşmelidir ZORUNLU.
getRadioVersion() Cihazda kullanılan spesifik dahili radyo/modem versiyonunu tanımlayan, cihaz uygulayıcısı tarafından seçilen, insan tarafından okunabilir formatta bir değer OLMALIDIR (olmalı veya döndürmelidir). Bir aygıtın dahili radyosu/modemi yoksa NULL döndürmesi GEREKİR. Bu alanın değeri 7 bit ASCII olarak kodlanabilir ve "^[a-zA-Z0-9._-,]+$" normal ifadesiyle eşleşmelidir ZORUNLU.
getSerial() Aynı MODEL ve ÜRETİCİYE sahip cihazlarda mevcut ve benzersiz olması GEREKEN bir donanım seri numarası OLMALIDIR (olmalı veya döndürmelidir). Bu alanın değeri 7 bit ASCII olarak kodlanabilir ve "^[a-zA-Z0-9._-,]+$" normal ifadesiyle eşleşmelidir ZORUNLU.

3.2.3. Amaç Uyumluluğu

3.2.3.1. Temel Uygulama Amaçları

Android amaçları, uygulama bileşenlerinin diğer Android bileşenlerinden işlevsellik talep etmesine olanak tanır. Android yukarı akış projesi, ortak eylemleri gerçekleştirmek için çeşitli niyet modellerini uygulayan, çekirdek Android uygulamaları olarak kabul edilen uygulamaların bir listesini içerir.

  • [C-0-1] Cihaz uygulamalarının, AOSP'de aşağıdaki temel android uygulamaları tarafından tanımlanan tüm genel amaç filtre modelleri için bir veya daha fazla uygulamayı veya hizmet bileşenini bir amaç işleyiciyle önceden yüklemesi ZORUNLUDUR:

    • Masa saati
    • Tarayıcı
    • Takvim
    • Kişiler
    • Galeri
    • Küresel Arama
    • Başlatıcı
    • Müzik
    • Ayarlar
3.2.3.2. Niyet Çözümü
  • [C-0-1] Android genişletilebilir bir platform olduğundan, cihaz uygulamalarının, Ayarlar hariç bölüm 3.2.3.1'de atıfta bulunulan her amaç modelinin üçüncü taraf uygulamalar tarafından geçersiz kılınmasına izin vermesi ZORUNLUDUR. Yukarı akışlı Android açık kaynak uygulaması buna varsayılan olarak izin verir.

  • [C-0-2] Cihaz uygulayıcıları, sistem uygulamalarının bu amaç kalıplarını kullanımına özel ayrıcalıklar VERMEMELİ veya üçüncü taraf uygulamaların bu kalıplara bağlanmasını ve bunların kontrolünü üstlenmesini engellememelidir. Bu yasak, özellikle, kullanıcının tümü aynı amaç modelini işleyen birden fazla uygulama arasında seçim yapmasına olanak tanıyan "Seçici" kullanıcı arayüzünün devre dışı bırakılmasını içerir ancak bununla sınırlı değildir.

  • [C-0-3] Cihaz uygulamalarının, kullanıcıların amaçlara yönelik varsayılan etkinliği değiştirebilmesi için bir kullanıcı arayüzü sağlaması ZORUNLUDUR.

  • Ancak, varsayılan etkinlik veri URI'si için daha spesifik bir özellik sağladığında, cihaz uygulamaları belirli URI kalıpları için (örneğin, http://play.google.com) varsayılan etkinlikler SAĞLAYABİLİR. Örneğin, "http://www.android.com" veri URI'sini belirten bir amaç filtresi modeli, tarayıcının "http://" için temel amaç modelinden daha spesifiktir.

Android ayrıca, üçüncü taraf uygulamaların belirli web URI amacı türleri için yetkili bir varsayılan uygulama bağlama davranışı bildirmesine yönelik bir mekanizma içerir. Bu tür yetkili bildirimler bir uygulamanın amaç filtresi modellerinde tanımlandığında, cihaz uygulamaları:

  • [C-0-4] Yukarı akışlı Android Açık Kaynak Projesi'nde Paket Yöneticisi tarafından uygulanan Digital Asset Links spesifikasyonunda tanımlanan doğrulama adımlarını gerçekleştirerek herhangi bir amaç filtresini doğrulamaya ÇALIŞMALIDIR.
  • [C-0-5] Uygulamanın kurulumu sırasında amaç filtrelerini doğrulamaya çalışmalı ve başarıyla doğrulanan tüm URI amaç filtrelerini, URI'leri için varsayılan uygulama işleyicileri olarak ayarlamalıdır.
  • Başarılı bir şekilde doğrulanmaları ancak diğer aday URI filtrelerinin doğrulamada başarısız olması durumunda, belirli URI amaç filtrelerini URI'leri için varsayılan uygulama işleyicileri olarak ayarlayabilir. Bir cihaz uygulamasının bunu yapması durumunda, kullanıcıya ayarlar menüsünde URI başına uygun kalıp geçersiz kılmaları sağlaması ZORUNLUDUR.
  • Kullanıcıya Ayarlar'da aşağıdaki şekilde uygulama başına Uygulama Bağlantıları kontrolleri SAĞLANMALIDIR:
    • [C-0-6] Kullanıcının, bir uygulamanın varsayılan uygulama bağlantıları davranışını bütünsel olarak geçersiz kılabilmesi ZORUNLUDUR: her zaman açık, her zaman sor veya asla açılma; bu, tüm aday URI amaç filtrelerine eşit şekilde uygulanmalıdır.
    • [C-0-7] Kullanıcının aday URI amaç filtrelerinin listesini görebilmesi GEREKİR.
    • Cihaz uygulaması, kullanıcıya başarılı bir şekilde doğrulanan belirli aday URI amaç filtrelerini amaç başına filtre bazında geçersiz kılma yeteneği sağlayabilir.
    • [C-0-8] Cihaz uygulaması, bazı aday URI amaç filtrelerinin doğrulamada başarılı olmasına, bazılarının ise başarısız olmasına izin veriyorsa, cihaz uygulamasının kullanıcılara belirli aday URI amaç filtrelerini görüntüleme ve geçersiz kılma yeteneğini sağlaması ZORUNLUDUR.
3.2.3.3. Amaç Ad Alanları
  • [C-0-1] Cihaz uygulamaları, Android'de bir ACTION, CATEGORY veya başka bir anahtar dize kullanan herhangi bir yeni amacı veya yayın amacı modelini kabul eden herhangi bir Android bileşeni İÇERMEMELİDİR. veya com.android. ad alanı.
  • [C-0-2] Cihaz uygulayıcıları, başka bir kuruluşa ait bir paket alanına bir EYLEM, KATEGORİ veya başka bir anahtar dize kullanan herhangi bir yeni amacı veya yayın amacı modelini kabul eden herhangi bir Android bileşenini EKLEMEMELİDİR.
  • [C-0-3] Cihaz uygulayıcıları, bölüm 3.2.3.1'de listelenen temel uygulamalar tarafından kullanılan amaç modellerinden herhangi birini DEĞİŞTİRMEMELİ veya GELİŞTİRMEMELİDİR.
  • Cihaz uygulamaları, kendi kuruluşlarıyla açıkça ve açıkça ilişkilendirilen ad alanlarını kullanan amaç modellerini İÇEREBİLİR. Bu yasaklama, bölüm 3.6'da Java dil sınıfları için belirtilene benzerdir.
3.2.3.4. Yayın Amaçları

Üçüncü taraf uygulamalar, donanım veya yazılım ortamındaki değişiklikler hakkında kendilerini bilgilendirmek amacıyla belirli amaçları yayınlamak için platforma güvenir.

Cihaz uygulamaları:

  • [C-0-1] SDK belgelerinde açıklandığı gibi uygun sistem olaylarına yanıt olarak genel yayın amaçlarını yayınlaması GEREKİR. Arka plan uygulamalarına yönelik sınırlamalar SDK belgelerinde de açıklandığı için bu gereksinimin bölüm 3.5 ile çelişmediğini unutmayın.
3.2.3.5. Varsayılan Uygulama Ayarları

Android, kullanıcılara varsayılan uygulamalarını (örneğin Ana ekran veya SMS) seçmenin kolay bir yolunu sağlayan ayarlar içerir.

Mantıklı olduğu durumlarda, cihaz uygulamalarının benzer bir ayarlar menüsü sağlaması ve aşağıdaki SDK belgelerinde açıklanan amaç filtresi modeli ve API yöntemleriyle uyumlu olması ZORUNLUDUR.

Cihaz uygulamaları android.software.home_screen raporunu veriyorsa:

Cihaz uygulamaları android.hardware.telephony raporunu veriyorsa:

  • [C-2-1] Varsayılan SMS uygulamasını değiştirmek için bir iletişim kutusu göstermek üzere android.provider.Telephony.ACTION_CHANGE_DEFAULT amacını çağıracak bir ayarlar menüsü SAĞLAMALIDIR.

  • [C-2-2] android.telecom.action.CHANGE_DEFAULT_DIALER kullanıcının varsayılan telefon uygulamasını değiştirmesine izin vermek için bir iletişim kutusu göstermek amacıyla onurlandırmalıdır.

    • Önceden yüklenmiş telefon uygulamasını kullanacak acil durum aramaları dışında, kullanıcı tarafından seçilen varsayılan telefon uygulamasının kullanıcı arayüzünü gelen ve giden aramalar için kullanmalıdır.
  • [C-2-3] android.telecom.action.change_phone_Accounts , PhoneAccounts ilişkili ConnectionServices ve telekomünikasyon hizmeti sağlayıcısının giden çağrıları yerleştirmek için kullanacağı varsayılan bir PhoneAccount'u yapılandırmak için kullanıcının uygunluğunu sağlamak amacıyla onurlandırmalıdır. AOSP uygulaması, "Calls" Ayarları menüsüne bir "Çağrı Hesapları Seçeneği" menüsü ekleyerek bu gereksinimi karşılar.

Cihaz uygulamaları android.hardware.nfc.hce rapor ederse,:

Cihaz uygulamaları VoiceInteractionService destekliyorsa ve bir seferde yüklü bu API'yi kullanarak birden fazla uygulamaya sahipse, bunlar:

3.2.4. İkincil ekranlarda faaliyetler

Cihaz uygulamaları ikincil ekranlarda normal Android etkinliklerinin başlatılmasına izin veriyorsa, bunlar:

  • [C-1] android.software.activities_on_secondary_displays özellik bayrağını ayarlamalıdır.
  • [C-1-2] birincil ekranda çalışan bir etkinliğe benzer API uyumluluğunu garanti etmelidir.
  • [C-1-3], yeni etkinliği, yeni etkinlik, ActivityOptions.setLaunchDisplayId() API üzerinden bir hedef ekran belirlemeden başlatıldığında başlatan etkinlikle aynı ekrana indirmelidir.
  • [C-1-4] Display.FLAG_PRIVATE bayrağı kaldırıldığında tüm etkinlikleri yok etmelidir.
  • [C-1-5], ekranın kendisi yeniden boyutlandırılırsa, bir VirtualDisplay üzerindeki tüm etkinlikleri yeniden boyutlandırmalıdır.
  • Bir metin giriş alanı ikincil bir ekrana odaklandığında, birincil ekranda bir IME (giriş yöntemi düzenleyicisi, kullanıcıların metin girmesini sağlayan bir kullanıcı denetimi) gösterebilir.
  • Dokunma veya anahtar girişleri desteklendiğinde, birincil ekrandan bağımsız olarak ikincil ekrana giriş odağını uygulamalıdır.
  • İkincil ekranda bir etkinlik başlatılırsa, görüntülenmesi, doğru çalışması ve uyumluluğunu korumak için bu ekrana karşılık gelen android.content.res.Configuration olmalıdır.

Cihaz uygulamaları ikincil ekranlarda ve birincil ve ikincil ekranlarda normal Android etkinliklerinin başlatılmasına izin veriyorsa, farklı android.util.displayMetrics :

  • [C-2-1] yeniden düzenlenemeyen aktiviteler ( resizeableActivity=false AndroidManifest.xml false) ve API seviye 23 veya daha düşük hedefleyen uygulamalara ikincil ekranlarda izin verilmemelidir.

Cihaz uygulamaları ikincil ekranlarda normal Android etkinliklerinin başlatılmasına izin veriyorsa ve ikincil ekranda android.view.display.flag_private bayrağı var:

  • [C-3-1] Yalnızca bu ekranın, sistemin ve zaten bu ekranda bulunan etkinliklerin sahibi, başlatabilmelidir. Herkes android.view.display.flag_public bayrağı bulunan bir ekrana başlayabilir.

3.3. Yerel API Uyumluluğu

Yerel kod uyumluluğu zordur. Bu nedenle, cihaz uygulayıcıları:

  • [SR] aşağıda listelenen kütüphanelerin uygulamalarını yukarı akış Android Açık Kaynak projesinden kullanmayı şiddetle tavsiye etti.

3.3.1. Uygulama ikili arayüzleri

Yönetilen Dalvik bayt kodu, uygulama .apk dosyasında sağlanan yerel kodu, uygun cihaz donanım mimarisi için derlenmiş bir ELF .so dosyası olarak çağırabilir. Yerel kod büyük ölçüde temel işlemci teknolojisine bağlı olduğundan Android, Android NDK'da bir dizi Uygulama İkili Arayüzü (ABI) tanımlar.

Cihaz uygulamaları:

  • [C-0-1] bir veya daha fazla tanımlanmış ABIS ile uyumlu olmalı ve Android NDK ile uyumluluk uygulamalıdır.
  • [C-0-2], standart Java Yerel Arayüz (JNI) anlambilimini kullanarak, yerel koda çağırmak için yönetilen ortamda çalışan kod desteğini içermelidir.
  • [C-0-3] aşağıdaki listede gerekli her kütüphane ile kaynak uyumlu (yani başlık uyumlu) ve ikili uyumlu (ABI için) olmalıdır.
  • [C-0-5] cihaz tarafından desteklenen yerel uygulama ikili arayüzünü (ABI) android.os.Build.SUPPORTED_ABIS , android.os.Build.SUPPORTED_32_BIT_ABIS ve android.os.Build.SUPPORTED_64_BIT_ABIS , her bir virgül ayrılmış Abis listesi en çok tercih edilenlere sipariş edildi.
  • [C-0-6], yukarıdaki parametreler aracılığıyla, aşağıdaki ABIS listesinin bir alt kümesini rapor etmeli ve listede olmayan herhangi bir ABI bildirmemelidir.

    • armeabi
    • armeabi-v7a
    • arm64-v8a
    • x86
    • x86-64
    • [C-0-7], yerel kod içeren uygulamalar için kullanılabilir yerel API'ler sağlayan aşağıdaki tüm kütüphaneleri yapmalıdır:

    • libaaudio.so (aaudio yerel ses desteği)

    • libandroid.so (yerel Android etkinlik desteği)
    • libc (C kütüphanesi)
    • libcamera2ndk.so
    • libdl (dinamik bağlayıcı)
    • libEGL.so (yerel OpenGL yüzey yönetimi)
    • libGLESv1_CM.so (OpenGL ES 1.x)
    • libGLESv2.so (OpenGL ES 2.0)
    • libGLESv3.so (OpenGL ES 3.x)
    • libicui18n.so
    • libicuuc.so
    • libjnigraphics.so
    • liblog (Android günlüğü)
    • libmediandk.so (yerel medya API'leri desteği)
    • libm (matematik kütüphanesi)
    • Libnealnetworks.so (Nöral Ağlar API)
    • libOpenMAXAL.so (OpenMAX AL 1.0.1 desteği)
    • libOpenSLES.so (OpenSL ES 1.0.1 ses desteği)
    • Librs.
    • libstdc ++ (C ++ için minimal destek)
    • libvulkan.so (vulkan)
    • libz (Zlib sıkıştırması)
    • JNI arayüzü
  • [C-0-8] Yukarıda listelenen yerel kütüphaneler için genel işlevleri eklememeli veya kaldırmamalıdır.

  • [C-0-9] doğrudan /vendor/etc/public.libraries.txt adresindeki üçüncü taraf uygulamalara maruz kalan ek ASOPS olmayan kütüphaneleri listelemelidir.
  • [C-0-10], AOSP'de uygulanan ve sağlanan diğer yerel kütüphaneleri sistem kütüphaneleri olarak, ayrıldıkça API seviyesini 24 veya daha yüksek hedefleyen üçüncü taraf uygulamalara maruz bırakmamalıdır.
  • [C-0-11], NDK'da tanımlandığı gibi tüm OpenGL ES 3.1 ve Android Uzatma Paketi fonksiyon sembollerini libGLESv3.so kütüphanesi aracılığıyla dışa aktarmalıdır. Tüm sembollerin mevcut olması gerekse de, Bölüm 7.1.4.1, karşılık gelen her bir işlevin tam olarak uygulanmasının beklendiği gereksinimleri daha ayrıntılı olarak açıkladığını unutmayın.
  • [C-0-12 libvulkan.so Çekirdek VK_KHR_swapchain 1.0 fonksiyon sembollerinin yanı sıra VK_KHR_surface , VK_KHR_android_surface , VK_KHR_maintenance1 ve VK_KHR_get_physical_device_properties2 YOK. Tüm sembollerin mevcut olması gerekse de, Bölüm 7.1.4.2, karşılık gelen her bir işlevin tam olarak uygulanmasının beklendiği gereksinimleri daha ayrıntılı olarak açıkladığını unutmayın.
  • Yukarı akışlı Android Açık Kaynak Projesinde bulunan kaynak kodu ve başlık dosyaları kullanılarak OLUŞTURULMALIDIR

Android'in gelecekteki sürümlerinin ek ABI'ler için destek sağlayabileceğini unutmayın.

3.3.2. 32 bit kol doğal kod uyumluluğu

Cihaz uygulamaları armeabi Abi'nin desteğini bildirirse, bunlar:

  • [C-3-1] armeabi-v7a desteklemeli ve desteğini bildirmelidir, çünkü armeabi yalnızca eski uygulamalarla geriye dönük uyumluluk içindir.

Cihaz uygulamaları, bu ABI'yi kullanan uygulamalar için armeabi-v7a ABI'nin desteğini bildiriyorsa,:

  • [C-2-1] /proc/cpuinfo aşağıdaki satırları içermelidir ve diğer ABI'ler tarafından okunduklarında bile aynı cihazdaki değerleri değiştirmemelidir.

    • Features: .
    • CPU architecture: Ardından, cihazın en yüksek desteklenen kol mimarisini (örn., ARMV8 cihazları için "8") tanımlayan bir tamsayı takip eder.
  • [C-2-2], ABI'nin bir ARMV8 mimarisinde, yerel CPU desteği veya yazılım öyküleri yoluyla uygulandığı durumda bile aşağıdaki işlemleri her zaman mevcut tutmalıdır:

    • SWP ve SWPB talimatları.
    • Setend Talimatı.
    • CP15ISB, CP15DSB ve CP15DMB bariyer işlemleri.
  • [C-2-3] Gelişmiş SIMD (AKA neon) uzantısı için destek içermelidir.

3.4. Web Uyumluluğu

3.4.1. Web Görünümü Uyumluluğu

Cihaz uygulamaları android.webkit.Webview API'sinin tam bir uygulamasını sağlıyorsa, bunlar:

  • [C-1] android.software.webview rapor etmelidir.
  • [C-1-2], android.webkit.WebView API'sinin uygulanması için Android 9 dalındaki yukarı akış Android Açık Kaynak Projesi'nden Chromium Project yapısını kullanmalıdır.
  • [C-1-3] WebView tarafından bildirilen kullanıcı aracısı dizesi şu formatta olmalıdır:

    Mozilla/5.0 (Linux; Android $ (sürüm); [$ (model)] [Build/$ (Build)]; WV) AppleWebkit/537.36 (KHTML, Gecko gibi) Sürüm/4.0 $ (Chromium_Ver) Mobil Safari/537.36

    • $(VERSION) dizesinin değeri, android.os.Build.VERSION.RELEASE değeriyle aynı OLMALIDIR.
    • $ (Model) dizesi boş olabilir, ancak boş değilse android.os.build.model ile aynı değere sahip olmalıdır.
    • "Build/$ (Build)" atlanabilir, ancak mevcutsa $ (Build) dizesi Android.OS.BUILD.ID değeri ile aynı olmalıdır.
    • $(CHROMIUM_VER) dizesinin değeri, yukarı akışlı Android Açık Kaynak Projesindeki Chromium sürümü OLMALIDIR.
    • Cihaz uygulamaları, kullanıcı aracısı dizesinde Mobil'i ihmal edebilir.
  • WebView bileşeni, mümkün olduğunca çok sayıda HTML5 özelliğine destek içermelidir ve destekliyorsa özelliği HTML5 spesifikasyonuna uymalıdır.

3.4.2. Tarayıcı Uyumluluğu

Cihaz uygulamaları genel web taraması için bağımsız bir tarayıcı uygulaması içeriyorsa, bunlar:

  • [C-1], HTML5 ile ilişkili bu API'lerin her birini desteklemelidir:
  • [C-1-2] HTML5/W3C WebStorage API'sını desteklemeli ve HTML5/W3C indexedDB API'sını desteklemelidir. Web geliştirme standartları kuruluşları web depolama yerine IndexedDB'yi tercih etmeye başladıkça, IndexedDB'nin Android'in gelecekteki bir sürümünde gerekli bir bileşen haline gelmesinin beklendiğini unutmayın.
  • Bağımsız tarayıcı uygulamasında özel bir kullanıcı aracısı dizesi gönderebilir.
  • Bağımsız tarayıcı uygulamasında mümkün olduğunca fazla HTML5 desteği uygulamalıdır (yukarı akış Webkit tarayıcı uygulamasına veya üçüncü taraf bir yedeklemeye dayanarak).

Ancak, cihaz uygulamaları bağımsız bir tarayıcı uygulaması içermiyorsa, bunlar:

  • [C-2-1] yine de Bölüm 3.2.3.1'de açıklandığı gibi kamu amaçlı kalıpları desteklemelidir.

3.5. API Davranış Uyumluluğu

Cihaz uygulamaları:

  • [C-0-9] Bölüm 3.5.1'de açıklandığı gibi kısıtlanmadıkça, yüklü tüm uygulamalar için API davranışsal uyumluluğunun uygulanmasını sağlamalıdır.
  • [C-0-10] API davranışsal uyumluluğunu yalnızca cihaz uygulayıcıları tarafından seçilen uygulamalar için sağlayan izin verme yaklaşımını uygulamamalıdır.

API tiplerinin her birinin (yönetilen, yumuşak, doğal ve web) davranışları, yukarı akış Android açık kaynak projesinin tercih edilen uygulanmasıyla tutarlı olmalıdır. Bazı spesifik uyumluluk alanları şunlardır:

  • [C-0-1] Cihazlar standart bir niyetin davranışını veya anlambilimini değiştirmemelidir.
  • [C-0-2] Cihazlar, belirli bir sistem bileşeninin (hizmet, etkinlik, ContentProvider vb.) Yaşam döngüsü veya yaşam döngüsü semantiğini değiştirmemelidir.
  • [C-0-3] Cihazlar standart bir iznin anlambilimini değiştirmemelidir.
  • Cihazlar, arka plan uygulamalarında uygulanan sınırlamaları değiştirmemelidir. Daha spesifik olarak, arka plan uygulamaları için:
    • [C-0-4] GnssMeasurement ve GnssNavigationMessage çıktı almak için uygulama tarafından kaydedilen geri çağrıları yürütmeyi bırakmaları gerekir.
    • [C-0-5] LocationManager API sınıfı veya WifiManager.startScan() yöntemi aracılığıyla uygulamaya sağlanan güncellemelerin sıklığını hızlandırmalıdırlar.
    • [C-0-6] Uygulama API Seviyesi 25 veya daha yüksek veya daha yüksek hedefliyorsa, yayın niyeti bir "signature" veya "signatureOrSystem" gerektirmedikçe, uygulamanın manifestinde standart Android niyetlerinin örtük yayınları için yayın alıcılarını kaydettirmemelidir. "signatureOrSystem" protectionLevel İzni veya Muafiyet Listesi'ndedir .
    • [C-0-7] Uygulama API Seviyesi 25 veya daha yüksek bir seviyeyi hedefliyorsa, tıpkı uygulama geçici bir izin verilen listeye yerleştirilmedikçe, uygulamanın hizmetlerin stopSelf() yöntemini aradığı gibi, uygulamanın arka plan hizmetlerini durdurmaları gerekir. Kullanıcı tarafından görülebilen bir görevi ele almak için.
    • [C-0-8] Uygulama API Seviyesi 25 veya daha yüksek veya daha yüksek hedefliyorsa, uygulamanın sahip olduğu Wakelocks'u serbest bırakmaları gerekir.
  • [C-0-9] Cihazlar, Security.getProviders() yönteminden, verilen sırada ve verilen adlarla ( Provider.getName() tarafından döndürüldüğü gibi) ve sınıflardan ilk yedi dizi değeri olarak aşağıdaki güvenlik sağlayıcılarını döndürmelidir. uygulama listeyi insertProviderAt() veya removeProvider() aracılığıyla değiştirmedikçe. Cihazlar, aşağıdaki sağlayıcılar listesinden sonra ek sağlayıcılar döndürebilir.
    1. AndroidNSSP - android.security.net.config.NetworkSecurityConfigProvider
    2. AndroidOpenssl - com.android.org.conscrypt.OpenSSLProvider
    3. CertPathProvider - sun.security.provider.CertPathProvider
    4. AndroidKeyStorebCworkaround - android.security.keystore.AndroidKeyStoreBCWorkaroundProvider
    5. BC - com.android.org.bouncycastle.jce.provider.BouncyCastleProvider
    6. Harmonyjsse - com.android.org.conscrypt.JSSEProvider
    7. AndroidKeyStore - android.security.keystore.AndroidKeyStoreProvider

Yukarıdaki liste kapsamlı değildir. Uyumluluk Test Paketi (CTS), platformun önemli kısımlarını davranışsal uyumluluk açısından test eder, ancak tamamını test etmez. Android Açık Kaynak Projesi ile davranışsal uyumluluğun sağlanması uygulayıcının sorumluluğundadır. Bu nedenle, cihaz uygulayıcılarının sistemin önemli kısımlarını yeniden uygulamak yerine, mümkün olan yerlerde Android Açık Kaynak Projesi aracılığıyla sağlanan kaynak kodunu kullanması GEREKLİdir.

3.5.1. Arka plan kısıtlaması

Cihaz uygulamaları AOSP'ye dahil edilen uygulama kısıtlamalarını uygularsa veya uygulama kısıtlamalarını genişletirse, bunlar:

  • [C-SR], kullanıcının kısıtlı uygulamalar listesini görebileceği yerlerde kullanıcının uygunluğunu sağlamanız şiddetle tavsiye edilir.
  • [C-1-2], her uygulamadaki kısıtlamaları açmak / kapatmak için kullanıcının uygunluğu sağlamalıdır.
  • [C-1-3], kötü sistem sağlığı davranışının kanıtı olmadan kısıtlamaları otomatik olarak uygulamamalıdır, ancak sıkışmış Wakelocks, uzun süren hizmetler ve diğer kriterler gibi kötü sistem sağlığı davranışlarının tespiti üzerine uygulamalardaki kısıtlamaları uygulayabilir. Kriterler cihaz uygulayıcıları tarafından belirlenebilir, ancak uygulamanın sistem sağlığı üzerindeki etkisi ile ilişkili olmalıdır. Uygulamanın piyasadaki popülerlik eksikliği gibi yalnızca sistem sağlığı ile ilgili olmayan diğer kriterler kriter olarak kullanılmamalıdır.
  • [C-1-4], bir kullanıcı uygulama kısıtlamalarını manuel olarak kapattığında uygulamalar için uygulama kısıtlamalarını otomatik olarak uygulamamalıdır ve kullanıcının uygulama kısıtlamalarını uygulamasını önerebilir.
  • [C-1-5], bir uygulamaya otomatik olarak uygulama kısıtlamaları uygulanırsa kullanıcıları bilgilendirmelidir.
  • [C-1-6], kısıtlı uygulama bu API'yı çağırdığında ActivityManager.isBackgroundRestricted() için true dönmelidir.
  • [C-1-7], kullanıcı tarafından açıkça kullanılan üst ön plan uygulamasını kısıtlamamalıdır.
  • [C-1-8] Kullanıcı, kısıtlanmış olan uygulamayı açıkça kullanmaya başladığında, üst ön plan uygulaması haline gelen bir uygulamadaki kısıtlamaları askıya almalıdır.
  • [C-1-9] tüm uygulama kısıtlama olaylarını UsageStats aracılığıyla bildirmelidir. Cihaz uygulamaları AOSP'de uygulanan uygulama kısıtlamalarını genişletirse, bu belgede açıklanan uygulamayı izlemelidir.

3.6. API Ad Alanları

Android, Java programlama dili tarafından tanımlanan paket ve sınıf ad alanı kurallarına uyar. Üçüncü taraf uygulamalarla uyumluluğu sağlamak için, cihaz uygulayıcılarının bu paket ad alanlarında herhangi bir yasaklı değişiklik (aşağıya bakın) YAPMAMALIDIR:

  • java.*
  • javax.*
  • sun.*
  • android.*
  • androidx.*
  • com.android.*

Yani, onlar:

  • [C-0-1], herhangi bir yöntem veya sınıf imzasını değiştirerek veya sınıfları veya sınıf alanlarını kaldırarak Android platformunda kamuya açık API'leri değiştirmemelidir.
  • [C-0-2], yukarıdaki ad alanlarındaki API'lara kamuya açık bir öğe (sınıflar veya arayüzler veya mevcut sınıflara veya arayüzlere veya arayüzlere veya sistem API'larına veya test veya sistem API'larına eklememelidir. “Halka açık bir öğe”, yukarı akış Android kaynak kodunda kullanılan “@hide” işaretçisi ile dekore edilmeyen herhangi bir yapıdır.

Cihaz uygulayıcıları API'lerin altında yatan uygulamayı değiştirebilir, ancak bu tür değişiklikler:

  • [C-0-3], kamuya açık herhangi bir API'lerin belirtilen davranışı ve Java dili imzasını etkilememelidir.
  • [C-0-4] Reklamı verilmemeli veya geliştiricilere başka bir şekilde maruz bırakılmamalıdır.

Ancak, cihaz uygulayıcıları standart Android ad alanı dışında özel API'ler ekleyebilir, ancak özel API'lar:

  • [C-0-5] başka bir kuruluşa ait veya başka bir kuruluşa ait bir ad alanında olmamalıdır. Örneğin, cihaz uygulayıcıları com.google.* veya benzer ad alanına API EKLEMEMELİDİR: bunu yalnızca Google yapabilir. Benzer şekilde Google, diğer şirketlerin ad alanlarına API EKLEMEMELİDİR.
  • [C-0-6], Android paylaşılan bir kitaplıkta paketlenmelidir, böylece bunları yalnızca bunları açıkça kullanan uygulamalar (<Usessitary> Mekanizma aracılığıyla) bu tür API'ların artan bellek kullanımından etkilenir.

Bir cihaz uygulayıcısı yukarıdaki paket ad alanlarından birini iyileştirmeyi teklif ederse (mevcut bir API'ye kullanışlı yeni işlevler ekleyerek veya yeni bir API ekleyerek), uygulayıcının source.android.com adresini ziyaret etmesi ve değişikliklere katkıda bulunma sürecini başlatması GEREKLİdir. Bu sitedeki bilgilere göre kod.

Yukarıdaki kısıtlamaların, Java programlama dilinde API'leri adlandırmaya ilişkin standart kurallara karşılık geldiğini unutmayın; Bu bölüm yalnızca bu sözleşmeleri güçlendirmeyi ve bu Uyumluluk Tanımına dahil ederek onları bağlayıcı kılmayı amaçlamaktadır.

3.7. Çalışma Zamanı Uyumluluğu

Cihaz uygulamaları:

  • [C-0-1] tam Dalvik Yürütülebilir (DEX) formatını ve Dalvik Bytecode spesifikasyonu ve anlambilimini desteklemelidir.

  • [C-0-2], Dalvik Runtimes'i yukarı akış Android platformuna uygun olarak ve aşağıdaki tabloda belirtildiği şekilde bellek tahsis etmek için yapılandırmalıdır. (Ekran boyutu ve ekran yoğunluğu tanımları için bölüm 7.1.1'e bakın.)

  • Android Çalışma Zamanı'nı (ART), Dalvik Yürütülebilir Formatının referans yukarı akış uygulamasını ve referans uygulamanın paket yönetim sistemini kullanmalıdır.

  • Çalışma zamanının istikrarını sağlamak için çeşitli yürütme modları ve hedef mimariler altında Fuzz testleri yapmalıdır. Android Açık Kaynak Proje web sitesinde JFuzz ve Dexfuzz'a bakın.

Aşağıda belirtilen bellek değerlerinin minimum değerler olarak kabul edildiğini ve cihaz uygulamalarının uygulama başına daha fazla bellek ayırabileceğini unutmayın.

Ekran düzeni Ekran Yoğunluğu Minimum Uygulama Belleği
Android Watch 120 dpi (ldpi) 32MB
160 dpi (mdpi)
213 dpi (tvdpi)
240 dpi (hdpi) 36MB
280 DPI (280dpi)
320 dpi (xhdpi) 48MB
360 DPI (360dpi)
400 dpi (400dpi) 56MB
420 DPI (420dpi) 64MB
480 dpi (xxhdpi) 88MB
560 dpi (560 dpi) 112MB
640 dpi (xxxhdpi) 154MB
Küçük/Normal 120 dpi (ldpi) 32MB
160 dpi (mdpi)
213 dpi (tvdpi) 48MB
240 dpi (hdpi)
280 DPI (280dpi)
320 dpi (xhdpi) 80MB
360 DPI (360dpi)
400 dpi (400dpi) 96 MB
420 DPI (420dpi) 112MB
480 dpi (xxhdpi) 128MB
560 dpi (560 dpi) 192MB
640 dpi (xxxhdpi) 256MB
büyük 120 dpi (ldpi) 32MB
160 dpi (mdpi) 48MB
213 dpi (tvdpi) 80MB
240 dpi (hdpi)
280 DPI (280dpi) 96 MB
320 dpi (xhdpi) 128MB
360 DPI (360dpi) 160MB
400 dpi (400dpi) 192MB
420 DPI (420dpi) 228MB
480 dpi (xxhdpi) 256MB
560 dpi (560 dpi) 384MB
640 dpi (xxxhdpi) 512 MB
xlarge 120 dpi (ldpi) 48MB
160 dpi (mdpi) 80MB
213 dpi (tvdpi) 96 MB
240 dpi (hdpi)
280 DPI (280dpi) 144MB
320 dpi (xhdpi) 192MB
360 DPI (360dpi) 240MB
400 dpi (400dpi) 288MB
420 DPI (420dpi) 336MB
480 dpi (xxhdpi) 384MB
560 dpi (560 dpi) 576MB
640 dpi (xxxhdpi) 768MB

3.8. Kullanıcı Arayüzü Uyumluluğu

3.8.1. Başlatıcı (Ana Ekran)

Android, bir başlatıcı uygulaması (ana ekran) ve cihaz başlatıcısının (ana ekran) yerini alacak üçüncü taraf uygulamaları için destek içerir.

Cihaz uygulamaları, üçüncü taraf uygulamaların cihaz ana ekranını değiştirmesine izin veriyorsa, bunlar:

  • [C-1] android.software.home_screen platform özelliğini bildirmelidir.
  • [C-1-2], simgelerini sağlamak için üçüncü taraf uygulaması <adaptive-icon> etiketini kullandığında ve simgeleri almak için PackageManager yöntemleri çağrıldığında AdaptiveIconDrawable nesnesini döndürmelidir.

Cihaz uygulamaları, kısayolların uygulama içi sabitlemesini destekleyen varsayılan bir başlatıcı içeriyorsa, bunlar:

Tersine, cihaz uygulamaları kısayolların uygulama içi sabitlemesini desteklemiyorsa, bunlar:

Cihaz uygulamaları, KısaTutManager API'sı aracılığıyla üçüncü taraf uygulamalar tarafından sağlanan ek kısayollara hızlı erişim sağlayan varsayılan bir başlatıcı uyguluyorsa, bunlar:

  • [C-4-1] belgelenmiş tüm kısayol özelliklerini (örneğin statik ve dinamik kısayollar, sabitleme kısayolları) desteklemeli ve ShortcutManager API sınıfının API'lerini tam olarak uygulamalıdır.

Cihaz uygulamaları, uygulama simgeleri için rozetler gösteren varsayılan bir başlatıcı uygulaması içeriyorsa, bunlar:

  • [C-5-1] NotificationChannel.setShowBadge() API yöntemine saygı duymalıdır. Başka bir deyişle, değer true olarak ayarlanmışsa, uygulama simgesiyle ilişkili görsel bir karşılama gösterin ve uygulamanın tüm bildirim kanalları değeri false olarak ayarladığında herhangi bir uygulama simgesi rozet şeması göstermeyin.
  • Üçüncü taraf uygulamalar tescilli rozet şemasının tescilli API'lerin kullanımı yoluyla özel rozet şemasının desteğini gösterdiğinde, uygulama simgesi rozetlerini tescilli rozet şeması ile geçersiz kılabilir, ancak SDK'da açıklanan bildirim rozetleri API'leri aracılığıyla sağlanan kaynakları ve değerleri kullanmalıdır, örneğin Notification.Builder.setNumber() ve Notification.Builder.setBadgeIconType() API.

3.8.2. Widget'lar

Android, bir bileşen türü ve uygulamaların son kullanıcıya bir “AppWidget” ortaya çıkarmasına izin veren karşılık gelen API ve yaşam döngüsü tanımlayarak üçüncü taraf uygulama widget'larını destekler.

Cihaz uygulamaları üçüncü taraf uygulama widget'larını destekliyorsa, bunlar:

  • [C-1] android.software.app_widgets platform özelliği için destek beyan etmelidir.
  • [C-1-2], AppWidgets için yerleşik destek içermeli ve AppWidgets'i doğrudan başlatıcı içine eklemek, yapılandırmak, görüntülemek ve kaldırmak için kullanıcı arayüzü uygunluklarını ortaya çıkarmalıdır.
  • [C-1-3], standart ızgara boyutunda 4 x 4 olan widget'ları oluşturabilmelidir. Ayrıntılar için Android SDK belgelerindeki App Widget DesignGuidelines'e bakın.
  • Kilit ekranında uygulama widget'larını destekleyebilir.

Cihaz uygulamaları üçüncü taraf uygulama widget'larını ve kısayolların uygulama içi sabitlemesini destekliyorsa, bunlar:

3.8.3. Bildirimler

Android, üçüncü taraf uygulama geliştiricilerinin kullanıcıları dikkate değer etkinlikleri (örn. Ses, titreşim ve ışık) ve cihazın yazılım özelliklerini (örn. Bildirim gölgesi, sistem çubuğu) kullanarak kullanıcılara dikkat çekmesine ve kullanıcıların dikkatini çekmelerine izin veren Notification ve NotificationManager API'leri içerir. .

3.8.3.1. Bildirimlerin sunumu

Cihaz uygulamaları üçüncü taraf uygulamalarının kullanıcıları önemli etkinlikler hakkında bilgilendirmesine izin veriyorsa, bunlar:

  • [C-1], SDK belgelerinde açıklandığı gibi ve cihaz uygulama donanımında mümkün olduğu ölçüde donanım özelliklerini kullanan bildirimleri desteklemelidir. Örneğin, bir cihaz uygulaması bir vibratör içeriyorsa, titreşim API'lerini doğru şekilde uygulaması ZORUNLUDUR. Bir cihaz uygulamasında donanım yoksa, karşılık gelen API'lerin işlemsiz olarak uygulanması ZORUNLUDUR. Bu davranış bölüm 7'de daha ayrıntılı olarak açıklanmıştır.
  • [C-1-2] API'larda veya durum/Sistem Çubuğu Simge Stili Kılavuzu'nda belirtilen tüm kaynakları (simgeler, animasyon dosyaları vb.) Doğru bir şekilde oluşturmalıdır, ancak bildirimler için bundan alternatif bir kullanıcı deneyimi sağlayabilirler. Referans Android Açık Kaynak Uygulaması tarafından sağlanır.
  • [C-1-3] API'lerin bildirimleri güncellemesi, kaldırması ve gruplandırması için açıklanan davranışları onurlandırmalı ve uygulamalıdır.
  • [C-1-4], SDK'da belgelenen NotificationChannel API'sının tam davranışını sağlamalıdır.
  • [C-1-5], her kanal ve uygulama paketi seviyesi başına belirli bir üçüncü taraf uygulamasının bildirimini engellemek ve değiştirmek için bir kullanıcının uygunluğu sağlamalıdır.
  • [C-1-6] ayrıca silinen bildirim kanallarını görüntülemek için bir kullanıcının uygunluğu sağlamalıdır.
  • [C-1-7] Ek kullanıcı etkileşimi olmadan bildirim metninin yanında Notification.MessagingStyle aracılığıyla sağlanan tüm kaynakları (görüntüler, çıkartmalar, simgeler vb.) Doğru bir şekilde oluşturmalıdır. Örneğin, setGroupConversation aracılığıyla belirlenen bir grup konuşmasında Android.App.Person aracılığıyla sağlanan simgeler de dahil olmak üzere tüm kaynakları göstermelidir.
  • [C-SR], kullanıcı bu bildirimi birden çok kez reddettikten sonra, her kanal ve uygulama paketi seviyesi başına belirli bir üçüncü taraf uygulamanın bildirimini engellemek için bir kullanıcının uygunluğunu otomatik olarak ortaya çıkarması şiddetle tavsiye edilir.
  • Zengin bildirimleri desteklemelidir.
  • Heads-Up bildirimleri olarak bazı daha yüksek öncelik bildirimleri sunmalıdır.
  • Bildirimleri ertelemek için bir kullanıcının uygunluğu olmalıdır.
  • Yalnızca üçüncü taraf uygulamaların ne zaman kullanıcıları sürücü dikkat dağınıklığı gibi güvenlik sorunlarını azaltmak için kullanıcıları önemli olayları bildirebileceği görünürlüğünü ve zamanlamasını yönetebilir.

Cihaz uygulamaları zengin bildirimleri destekliyorsa, bunlar:

  • [C-2-1], sunulan kaynak öğeleri için Notification.Style .
  • Notification.Style API sınıfında ve alt sınıflarında tanımlanan her kaynak öğesini (örneğin simge, başlık ve özet metin) sunmalıdır.

Cihaz uygulamaları Heads-Up Bildirimlerini Destekliyorsa: Onlar:

  • [C-3-1] Heads-Up Bildirim görünümünü ve kaynaklarını Notification.Builder açıklandığı gibi kullanmalıdır.
  • [C-3-2], SDK'da açıklandığı gibi ek kullanıcı etkileşimi olmadan Notification.Builder.addAction() ile birlikte bildirim içeriği ile birlikte gösterilmelidir.
3.8.3.2. Bildirim Dinleyici Hizmeti

Android, uygulamaların (kullanıcı tarafından açıkça etkinleştirildikten sonra) tüm bildirimlerin bir kopyasını yayınlandıkları veya güncellendikçe almasına izin veren NotificationListenerService API'lerini içerir.

Cihaz uygulamaları, android.hardware.ram.normal özelliğini bildirirse, bunlar:

  • [C-1], bildirim nesnesine bağlı tüm meta veriler dahil tüm bu tür yüklü ve kullanıcı özellikli dinleyici hizmetlerine bildirimleri bütünüyle doğru ve derhal güncellemelidir.
  • [C-1-2] snoozeNotification() API çağrısına saygı duymalı ve bildirimi reddetmeli ve API çağrısında belirlenen erteleme süresinden sonra geri arama yapmalıdır.

Cihaz uygulamalarının bildirimleri ertelemek için bir kullanıcı uygunluğu varsa, bunlar:

  • [C-2-1] NotificationListenerService.getSnoozedNotifications() gibi standart API'ler aracılığıyla ertelenmiş bildirim durumunu düzgün bir şekilde yansıtmalıdır.
  • [C-2-2], kalıcı/ön plan hizmetlerinden olmadıkça, yüklü her üçüncü taraf uygulamalarından gelen bildirimleri ertelemek için bu kullanıcının uygunluğunu kullanılabilir hale getirmelidir.
3.8.3.3. DND (rahatsız etmeyin)

Cihaz uygulamaları DND özelliğini destekliyorsa, bunlar:

  • [C-1], UI_MODE_TYPE_NORMAL ile uygulamalar için, kullanıcının DND ilke konfigürasyonlarına uygulama erişimini sağlayabileceği veya reddedebileceği bir etkinlik olması gereken Action_notification_policy_access_Access_Settings'e yanıt verecek bir etkinlik uygulamalıdır.
  • [C-1-2], cihaz uygulaması, kullanıcının DND ilke yapılandırmasına erişmek için üçüncü taraf uygulamaları vermesi veya reddetmesi için bir araç sağladığında, kullanıcı tarafından oluşturulan ve önceden uygulamalar tarafından oluşturulan otomatik DND kurallarını görüntüleyin. -tanımlanmış kurallar.
  • [C-1-3] NotificationManager.Policy boyunca geçirilen suppressedVisualEffects değerlerini onurlandırmalı ve bir uygulama baskıladığı_effect_screen_off veya baskılanmış_effect_screen_on bayraklarından herhangi birini ayarladıysa, kullanıcıya görsel efektlerin DND ayarları menüsünde bastırıldığını göstermelidir.

Android, geliştiricilerin uygulamalarına arama dahil etmelerini ve uygulamalarının verilerini küresel sistem aramasına maruz bırakmalarını sağlayan API'leri içerir. Genel olarak konuşursak, bu işlevsellik, kullanıcıların sorgu girmesine olanak tanıyan, kullanıcılar yazarken önerileri görüntüleyen ve sonuçları görüntüleyen, sistem çapında tek bir kullanıcı arayüzünden oluşur. Android API'leri, geliştiricilerin kendi uygulamalarında arama sağlamak ve geliştiricilerin ortak küresel arama kullanıcı arayüzüne sonuç sağlamasına izin vermek için bu arayüzü yeniden kullanmalarına olanak tanır.

  • Android cihaz uygulamaları, kullanıcı girişine yanıt olarak gerçek zamanlı öneriler sunabilen, tek, paylaşılan, sistem çapında bir arama kullanıcı arayüzü olan genel aramayı içermelidir GEREKLİ.

Cihaz uygulamaları küresel arama arayüzünü uygularsa, bunlar:

  • [C-1], üçüncü taraf uygulamaların küresel arama modunda çalıştırıldığında arama kutusuna öneriler eklemesine izin veren API'leri uygulamalıdır.

Global aramayı kullanan üçüncü taraf uygulaması yüklenmezse:

  • Varsayılan davranış, web arama motoru sonuçlarını ve önerilerini görüntülemek olmalıdır.

Android ayrıca, uygulamaların mevcut bağlam hakkında ne kadar bilginin cihazdaki asistanla paylaşıldığını seçmesine izin vermek için API'leri de içerir.

Cihaz uygulamaları yardım eylemini destekliyorsa, bunlar:

  • [C-2-1], bağlam paylaşıldığında son kullanıcıya açıkça belirtmelidir:
    • Assist uygulaması, ekranın kenarları etrafında Android Açık Kaynak Proje uygulamasının süresini ve parlaklığını karşılayan veya aşan beyaz bir ışık görüntüleyerek her bir içeriğe eriştiğinde.
    • Önceden yüklenmiş Assist uygulaması için, kullanıcının varsayılan ses girişi ve yardımcı uygulama ayarları menüsünden ikiden daha az gezinme sağlayan ve yalnızca yardım uygulaması kullanıcı tarafından bir hotword veya yardımcı gezinme anahtarı girişinden açıkça çağrıldığında bağlamı paylaşmak.
  • [C-2-2] Bölüm 7.2.3'te açıklandığı gibi ASIST uygulamasını başlatmak için belirlenen etkileşim, kullanıcı tarafından seçilen yardımcı uygulamayı başlatmalıdır, başka bir deyişle VoiceInteractionService veya ACTION_ASSIST niyetini işleyen bir etkinlik.

3.8.5. Uyarılar ve tostlar

Uygulamalar, kısa bir süre sonra kaybolan son kullanıcıya kısa modal olmayan kısa dizeler görüntülemek için Toast API'sını kullanabilir ve diğer uygulamalar üzerinde bir yerleşim olarak uyarı pencerelerini görüntülemek için TYPE_APPLICATION_OVERLAY pencere türü API'sını kullanabilir.

Cihaz uygulamaları bir ekran veya video çıktısı içeriyorsa, bunlar:

  • [C-1], bir uygulamanın TYPE_APPLICATION_OVERLAY kullanan uyarı pencerelerini görüntülemesini engellemek için bir kullanıcının uygunluğu sağlamalıdır. AOSP uygulaması, bildirim gölgesinde kontroller yaparak bu gereksinimi karşılamaktadır.

  • [C-1-2] tost API'sını onurlandırmalı ve son kullanıcılara uygulamalardan son derece görünür bir şekilde tostları göstermelidir.

3.8.6. Temalar

Android, uygulamaların bir etkinlik veya uygulamaya stil uygulaması için bir mekanizma olarak “temalar” sağlar.

Android, Android SDK tarafından tanımlandığı gibi Holo tema görünümünü ve hislerini eşleştirmek istiyorlarsa, uygulama geliştiricilerinin kullanmaları için bir dizi tanımlanmış stil olarak bir “holo” ve "malzeme" tema ailesini içerir.

Cihaz uygulamaları bir ekran veya video çıktısı içeriyorsa, bunlar:

Android ayrıca, cihaz uygulayıcısı tarafından tanımlanan cihaz temasının görünümünü ve hissini eşleştirmek istiyorlarsa, uygulama geliştiricilerinin kullanmaları için bir dizi tanımlanmış stil olarak bir “cihaz varsayılan” tema ailesi içerir.

Android, uygulama geliştiricilerinin durum ve navigasyon çubuğunun arkasındaki alanı uygulama içeriğiyle doldurmalarını sağlayan yarı saydam sistem çubuklarına sahip bir varyant temasını destekler. Bu yapılandırmada tutarlı bir geliştirici deneyimi sağlamak için durum çubuğu simge stilinin farklı cihaz uygulamalarında korunması önemlidir.

Cihaz uygulamaları bir sistem durum çubuğu içeriyorsa, bunlar:

  • [C-2-1], simge sorunlu bir durumu göstermedikçe veya bir uygulama, System_UI_FLAG_LIGHT_STATUS_BAR bayrağı kullanan bir ışık durumu çubuğu talep etmedikçe, sistem tarafından sistem durum simgeleri (sinyal gücü ve pil seviyesi gibi) ve sistem tarafından verilen bildirimleri kullanmalıdır. .
  • [C-2-2] Android Cihaz Uygulamaları, bir uygulama bir ışık durumu çubuğu talep ettiğinde sistem durumu simgelerinin rengini siyah olarak değiştirmelidir (ayrıntılar için R.Style'a bakın).

3.8.7. Canlı Duvarkağıtları

Android, uygulamaların bir veya daha fazla “canlı duvar kağıtları” nı son kullanıcıya maruz bırakmasına izin veren bir bileşen türü ve karşılık gelen API ve yaşam döngüsü tanımlar. Canlı duvar kağıtları, diğer uygulamaların arkasında duvar kağıdı olarak görüntülenen, sınırlı giriş özelliklerine sahip animasyonlar, desenler veya benzer görüntülerdir.

Donanım, tüm canlı duvar kağıtlarını, işlevsellik konusunda herhangi bir sınırlama olmaksızın, diğer uygulamalar üzerinde herhangi bir olumsuz etki olmaksızın makul bir kare hızında çalıştırabiliyorsa, canlı duvar kağıtlarını güvenilir bir şekilde çalıştırabildiği kabul edilir. Donanımdaki sınırlamalar duvar kağıtlarının ve/veya uygulamaların çökmesine, arızalanmasına, aşırı CPU veya pil gücü tüketmesine veya kabul edilemeyecek kadar düşük kare hızlarında çalışmasına neden oluyorsa, donanımın canlı duvar kağıdını çalıştıramayacağı kabul edilir. Örnek olarak, bazı canlı duvar kağıtları, içeriklerini oluşturmak için OpenGL 2.0 veya 3.x bağlamını kullanabilir. Canlı duvar kağıdı, birden fazla OpenGL bağlamını desteklemeyen donanımlarda güvenilir bir şekilde çalışmaz çünkü bir OpenGL bağlamının canlı duvar kağıdı kullanımı, aynı zamanda bir OpenGL bağlamı kullanan diğer uygulamalarla çakışabilir.

  • Yukarıda açıklandığı gibi canlı duvar kağıtlarını güvenilir bir şekilde çalıştırabilen cihaz uygulamalarının canlı duvar kağıtlarını uygulaması GEREKLİdir.

Cihaz uygulamaları canlı duvar kağıtları uygularsa, bunlar:

  • [C-1] android.software.live_wallpaper platform özelliğini bildirmelidir.

3.8.8. Etkinlik Değiştirme

Yukarı Akım Android kaynak kodu, görev değiştirme ve yakın zamanda erişilen etkinlikleri ve görevleri görüntüleyen sistem düzeyinde bir kullanıcı arayüzü olan Genel Bakış ekranını içerir.

Bölüm 7.2.3'te ayrıntılı olarak açıklandığı gibi Recents Fonksiyon Navigasyon Anahtarı dahil cihaz uygulamaları arayüzü değiştirebilir.

Bölüm 7.2.3'te ayrıntılı olarak açıklandığı gibi Recents Fonksiyon Navigasyon Anahtarını içeren cihaz uygulamaları arayüzü değiştirirse, bunlar:

  • [C-1] en az 7'ye kadar gösterilen etkinliği desteklemelidir.
  • En azından bir seferde 4 etkinlik başlığını göstermelidir.
  • [C-1-2] ekran sabitleme davranışını uygulamalı ve kullanıcıya özelliği değiştirecek bir ayar menüsü sağlamalıdır.
  • Recents olarak renk, simge, ekran başlığı göstermelidir.
  • Bir kapanış uygunluğu ("x") göstermeli, ancak kullanıcı ekranlarla etkileşime girene kadar bunu geciktirebilir.
  • Önceki etkinliğe kolayca geçmek için bir kısayol uygulamalıdır.
  • Recents işlev tuşu iki kez dokunduğunda, en son kullanılan iki uygulama arasındaki hızlı anahtar eylemini tetiklemelidir.
  • Recents işlevi tuşuna uzun süre basıldığında, desteklenirse, bölünmüş ekran çoklu güzergah modunu tetiklemelidir.
  • Bağlı Recents'i birlikte hareket eden bir grup olarak görüntüleyebilir.
  • [SR], genel bakış ekranı için yukarı akış Android kullanıcı arayüzünü (veya benzer bir küçük resim tabanlı arabirim) kullanmanız şiddetle tavsiye edilir.

3.8.9. Giriş Yönetimi

Android, üçüncü taraf giriş yöntemi editörleri için giriş yönetimi ve desteği için destek içerir.

Cihaz uygulamaları kullanıcıların aygıtta üçüncü taraf giriş yöntemlerini kullanmalarına izin veriyorsa, bunlar:

  • [C-1] android.software.input_methods platform özelliğini bildirmeli ve Android SDK belgelerinde tanımlandığı gibi IME API'lerini desteklemelidir.
  • [C-1-2], Android.settings.input_method_settings niyetine yanıt olarak üçüncü taraf giriş yöntemlerini eklemek ve yapılandırmak için kullanıcı tarafından erişilebilir bir mekanizma sağlamalıdır.

Cihaz uygulamaları android.software.autofill özellik bayrağını bildirirse,:

3.8.10. Kilit Ekranı Medya Kontrolü

Uzaktan kumanda istemcisi API, medya uygulamalarının kilit ekranında görüntülenen oynatma kontrolleriyle entegre olmasını sağlayan medya bildirim şablonu lehine Android 5.0'dan kullanımdan kaldırılmıştır.

3.8.11. Ekran Koruyucular (daha önce hayaller)

Android, daha önce rüyalar olarak adlandırılan InteractiveSacers için destek içerir. Ekran Koruyucular, bir güç kaynağına bağlı bir cihaz boşta kaldığında veya bir masa yuvasına yerleştirildiğinde kullanıcıların uygulamalarla etkileşime girmesine olanak tanır. Android Watch Cihazları ekran koruyucuları uygulayabilir, ancak diğer cihaz uygulamaları ekran koruyuculara destek içermeli ve kullanıcıların android.settings.DREAM_SETTINGS niyetine yanıt olarak ekran koruyucuları yapılandırmaları için bir ayar seçeneği sunmalıdır.

3.8.12. Konum

Cihaz uygulamaları, konum koordinatlarını sağlayabilen bir donanım sensörü (örn. GPS) içeriyorsa, bunlar

3.8.13. Unicode ve Yazı Tipi

Android, Unicode 10.0'da tanımlanan emoji karakterleri için destek içerir.

Cihaz uygulamaları bir ekran veya video çıktısı içeriyorsa, bunlar:

  • [C-1] bu emoji karakterlerini renk glifinde oluşturabilmelidir.
  • [C-1-2] aşağıdakileri desteklemelidir:
    • Farklı ağırlıklara sahip Roboto 2 yazı tipi-Sans-serif-ince, sans-serif-ışık, sans-serif-medium, sans-serif-black, sans-serif-condensed, sans-serif-serif-condensed ışığı cihaz.
    • Latin genişletilmiş A, B, C ve D aralıkları ve Unicode 7.0'ın para birimi sembolleri bloğundaki tüm glifler dahil olmak üzere Latin, Yunan ve Kiril'in tam Unicode 7.0 kapsamı.
  • Unicode Teknik Raporu #51'de belirtildiği gibi cilt tonunu ve çeşitli aile emojilerini desteklemelidir.

Cihaz uygulamaları bir IME içeriyorsa, bunlar:

  • Bu emoji karakterleri için kullanıcıya bir giriş yöntemi sağlamalıdır.

3.8.14. Çoklu pencere

Cihaz uygulamaları aynı anda birden fazla etkinlik gösterme yeteneğine sahipse, bunlar:

  • [C-1], Android SDK Multi Window Modu Destek belgesinde açıklanan uygulama davranışlarına ve API'lere uygun olarak bu tür çok pencere modlarını uygulamalı ve aşağıdaki gereksinimleri karşılamalıdır:
  • [C-1-2] Uygulamalar android:resizeableActivity özniteliğini true veya dolaylı olarak HedefsdkVersion> 24'e sahip olarak ayarlayarak, AndroidManifest.xml dosyasında çoklu pencere modunda çalışıp çalışamayacaklarını gösterebilir. Bu özniteliği açıkça manifestlerinde false olarak ayarlayın, çoklu pencere modunda başlatılmamalıdır. Bu android:resizeableActivity özniteliği çok pencere modunda başlatılabilir, ancak sistemin çok pencere modunda beklendiği gibi çalışmayabileceğine dair uyarı sağlamalıdır.
  • [C-1-3] ekran yüksekliği <440 dp ve ekran genişliği <440 dp ise bölünmüş ekran veya serbest biçimli mod sunmamalıdır.
  • Ekran xlarge sahip cihaz uygulamaları FreeForm modunu desteklemelidir.

Cihaz uygulamaları çoklu pencere modlarını ve bölünmüş ekran modunu destekliyorsa, bunlar:

  • [C-2-1] varsayılan olarak yeniden düzenlenebilir bir başlatıcıyı önceden yüklemelidir.
  • [C-2-2], bölünmüş ekranlı çoklu pencerenin yerleştirilmiş aktivitesini kırpmalı, ancak başlatıcı uygulaması odaklanmış pencere ise bazı içeriğini göstermelidir.
  • [C-2-3] Üçüncü Taraf Launcher uygulamasının beyan edilen AndroidManifestLayout_minWidth ve AndroidManifestLayout_minHeight değerlerini onurlandırmalı ve yanaşmış etkinliğin bazı içeriğini gösterme sırasında bu değerleri geçersiz kılmamalıdır.

Cihaz uygulamaları çoklu pencere modlarını ve resimdeki resim çoklu pencere modunu destekliyorsa, bunlar:

  • [C-3-1] Uygulama: * API Seviye 26 veya Daha Yüksek Hedefleme ve Destekleme API Seviye 25 veya Alt'ı android:supportsPictureInPicture ve Alt Deklarasyon API API Seviye 26 veya Daha Yüksek android:resizeableActivity ve android:supportsPictureInPicture .
  • [C-3-2] setActions() API'sı aracılığıyla geçerli PIP aktivitesi tarafından belirtildiği gibi SystemUI'larındaki eylemleri ortaya çıkarmalıdır.
  • [C-3-3] 1: 2.39'dan daha büyük veya daha büyük ve setAspectRatio() API aracılığıyla PIP aktivitesi tarafından belirtildiği gibi 2.39: 1'e eşit veya daha az olan en boy oranlarını desteklemelidir.
  • [C-3-4] PIP penceresini kontrol etmek için KeyEvent.KEYCODE_WINDOW kullanmalıdır; PIP modu uygulanmazsa, anahtar ön plan aktivitesinde kullanılabilir olmalıdır.
  • [C-3-5], bir uygulamanın PIP modunda görüntülenmesini engellemek için bir kullanıcının uygunluğu sağlamalıdır; AOSP uygulaması, bildirim gölgesinde kontroller yaparak bu gereksinimi karşılamaktadır.
  • [C-3-6] PIP penceresi için minimum genişlik ve yükseklik ve Configuration.uiMode UI_MODE_TYPE_TELEVISION olarak yapılandırıldığında PIP penceresi için minimum 240 dp genişliği ve 135 dp yüksekliği tahsis etmelidir.

3.8.15. Ekran Kesimi

Android, SDK belgesinde açıklandığı gibi bir ekran kesimini destekler. DisplayCutout API, ekranın kenarındaki içeriği görüntülemek için işlevsel olmayan bir alanı tanımlar.

Cihaz uygulamaları ekran kesme (ler) içeriyorsa, bunlar:

  • [C-1] sadece cihazın kısa kenarında kesik (ler) olmalıdır. Tersine, cihazın en boy oranı 1.0 (1: 1) ise, kesme (ler) i olmamalıdır.
  • [C-1-2] kenar başına birden fazla kesime sahip olmamalıdır.
  • [C-1-3] SDK'da açıklandığı gibi WindowManager.LayoutParams API üzerinden uygulama tarafından belirlenen ekran kesme bayraklarını onurlandırmalıdır.
  • [C-1-4], DisplayCutout API'sinde tanımlanan tüm kesme metrikleri için doğru değerleri rapor etmelidir.

3.9. Cihaz Yönetimi

Android , Android Cihaz Yönetimi API'sı aracılığıyla şifre politikalarının uygulanması veya uzaktan silme işlemi gibi sistem düzeyinde güvenliğe duyarlı uygulamaların cihaz yönetimi işlevlerini gerçekleştirmesine izin veren özellikler içerir.

Cihaz uygulamaları, Android SDK belgelerinde tanımlanan tüm cihaz yönetim politikalarını uyguluyorsa, bunlar:

  • [C-1] android.software.device_admin beyan etmelidir.
  • [C-1-2], Bölüm 3.9.1 ve Bölüm 3.9.1.1'de açıklandığı gibi cihaz sahibi sağlanmasını desteklemelidir.

3.9.1 Cihaz Sağlama

3.9.1.1 Cihaz Sahibi Sağlama

Cihaz uygulamaları android.software.device_admin bildirirse,:

  • [C-1], aşağıda açıklandığı gibi bir cihaz sahibi uygulaması olarak bir aygıt ilkesi istemcisinin (DPC) kaydettirilmesini desteklemelidir:
  • [C-1-2], sağlama işlemi sırasında cihaz sahibi olarak belirlenen uygulamayı kabul etmek için bazı olumlu işlemler gerektirmelidir. Onay, sağlama sırasında kullanıcı eylemi veya bazı programlı yollarla olabilir, ancak zor kodlanmamalı veya diğer cihaz sahibi uygulamalarının kullanılmasını engellememelidir.

Cihaz uygulamaları android.software.device_admin beyan ediyorsa, ancak aynı zamanda tescilli bir cihaz sahibi yönetimi çözümü ekleyin ve çözümlerinde standart "aygıt sahibi" olarak "cihaz sahibi eşdeğeri" olarak yapılandırılmış bir uygulamayı tanıtmak için bir mekanizma sağlayın. Android CihazPolicyManager APIS, onlar:

  • [C-2-1], tanıtılan belirli uygulamanın meşru bir kurumsal cihaz yönetimi çözümüne ait olduğunu doğrulamak için bir süreç olmalı ve haklara eşdeğeri "cihaz sahibi" olarak sahip olması için tescilli çözümde zaten yapılandırılmış olmalıdır. .
  • [C-2-2], DPC uygulamasını "Cihaz Sahibi" olarak kaydettirmeden önce android.app.action.PROVISION_MANAGED_DEVICE tarafından başlatılan akışla aynı AOSP cihazı sahibi onay açıklamasını göstermelidir.
  • DPC uygulamasını "Cihaz Sahibi" olarak kaydettirmeden önce cihazda kullanıcı verileri olabilir.
3.9.1.2 Yönetilen Profil Sağlama

Cihaz uygulamaları android.software.managed_users bildirirse,:

  • [C-1] API'lerin bir Aygıt İlkesi Denetleyicisi (DPC) uygulamasına izin veren yeni bir yönetilen profilin sahibi olmasına izin vermelidir.

  • [C-1-2] Yönetilen Profil Sağlama İşlemi ( Android.App.Action.Provision_Managed_Profile tarafından başlatılan akış) kullanıcıların deneyimi AOSP uygulamasına uyum sağlamalıdır.

  • [C-1-3], belirli bir sistem işlevinin aygıt ilkesi denetleyicisi (DPC) tarafından devre dışı bırakıldığını belirtmek için ayarlar içinde aşağıdaki kullanıcı uygunluklarını sağlamalıdır:

    • Belirli bir ayarın bir aygıt yöneticisi tarafından kısıtlandığında temsil edilecek tutarlı bir simge veya başka bir kullanıcı uygunluğu (örneğin yukarı akış AOSP bilgi simgesi).
    • setShortSupportMessage aracılığıyla aygıt yöneticisi tarafından sağlanan kısa bir açıklama mesajı.
    • DPC uygulamasının simgesi.

3.9.2 Yönetilen Profil Desteği

Cihaz uygulamaları android.software.managed_users bildirirse,:

  • [C-1], android.app.admin.DevicePolicyManager API'leri aracılığıyla yönetilen profilleri desteklemelidir.
  • [C-1-2] bir ve sadece bir yönetilen profilin oluşturulmasına izin vermelidir.
  • [C-1-3], yönetilen uygulamaları ve widget'ları ve Recents ve Bildirimler gibi diğer rozetli kullanıcı arayüzlerini temsil etmek için bir simge rozeti (AOSP yukarı akış çalışma rozetine benzer) kullanmalıdır.
  • [C-1-4], kullanıcının yönetilen bir profil uygulaması içinde ne zaman olduğunu belirtmek için bir bildirim simgesi (AOSP yukarı akış çalışma rozetine benzer) görüntülemelidir.
  • [C-1-5], cihaz uyanırsa ve ne zaman (Action_user_present) ve ön plan uygulaması yönetilen profil içinde olduğunu gösteren bir tost göstermelidir.
  • [C-1-6] Yönetilen bir profilin olduğu durumlarda, kullanıcının yönetilen profilden birincil kullanıcıya iletmesine izin vermek için 'seçici' niyetinde görsel bir uygunluk göstermelidir, ancak aygıt ilkesi tarafından etkinleştirilirse Denetleyici.
  • [C-1-7] Yönetilen bir profilin bulunduğu durumlarda, hem birincil kullanıcı hem de yönetilen profil için aşağıdaki kullanıcının uygunluklarını ortaya çıkarmalıdır:
    • Birincil kullanıcı ve yönetilen profil için pil, konum, mobil veriler ve depolama kullanımı için ayrı muhasebe.
    • Birincil kullanıcı veya yönetilen profil içinde yüklenen VPN uygulamalarının bağımsız yönetimi.
    • Birincil kullanıcı veya yönetilen profil içine yüklenen uygulamaların bağımsız yönetimi.
    • Birincil kullanıcı veya yönetilen profil içindeki hesapların bağımsız yönetimi.
  • [C-1-8] Önceden yüklenmiş çeviricinin, kişilerin ve mesajlaşma uygulamalarının, aygıt ilkesi denetleyicisi izin verirse, birincil profilden olanlarla birlikte yönetilen profilden (biri varsa) arayan bilgileri arayabileceğini ve arayabilmesini sağlamalıdır.
  • [C-1-9], yönetilen profil, birincil kullanıcıya ek olarak başka bir kullanıcı olarak sayılmamış olsa bile, birden fazla kullanıcı etkinleştirilmiş (bkz. Bölüm 9.5 ) bir cihaz için geçerli tüm güvenlik gereksinimlerini karşılamasını sağlamalıdır.
  • [C-1-10], yönetilen bir profilde çalışan uygulamalara erişim sağlamak için aşağıdaki gereksinimleri karşılayan ayrı bir kilit ekranı belirleme yeteneğini desteklemelidir.
    • Cihaz uygulamaları, DevicePolicyManager.ACTION_SET_NEW_PASSWORD niyetini onurlandırmalı ve yönetilen profil için ayrı bir kilit ekranı kimlik bilgisi yapılandırmak için bir arabirim göstermelidir.
    • Yönetilen profilin kilit ekranı kimlik bilgileri , Android Açık Kaynak Proje sitesinde belgelendiği gibi üst profil ile aynı kimlik bilgisi depolama ve yönetim mekanizmalarını kullanmalıdır.
    • DPC şifre politikaları, GetParentProfileInstance tarafından döndürülen DevicePolicyManager örneğine çağrılmadığı sürece yalnızca yönetilen profilin kilit ekranı kimlik bilgileri için geçerli olmalıdır.
  • Yönetilen profilden gelen kişiler önceden yüklenmiş çağrı günlüğü, çağrı içi kullanıcı arayüzünde, devam eden ve kaçırılan arama bildirimlerinde, kişiler ve mesajlaşma uygulamalarında görüntülendiğinde, yönetilen profil uygulamalarını belirtmek için kullanılan aynı rozetle rozlanmalıdır.

3.9.3 Yönetilen Kullanıcı Desteği

Cihaz uygulamaları android.software.managed_users bildirirse,:

  • [C-1], mevcut kullanıcıdan çıkış yapmak için bir kullanıcının karşılığını vermeli ve isLogoutEnabled true döndürdüğünde çoklu kullanıcı oturumunda birincil kullanıcıya geri dönmelidir. Cihazın kilidini açmadan kullanıcının uygunluğuna kilit ekranından erişilebilir olmalıdır.

3.10. Ulaşılabilirlik

Android, engelli kullanıcıların cihazlarında daha kolay gezinmelerine yardımcı olan bir erişilebilirlik katmanı sağlar. Buna ek olarak, Android, erişilebilirlik hizmeti uygulamalarının kullanıcı ve sistem olayları için geri arama almasını ve metin-konuşma, dokunsal geri bildirim ve Trackball/D-Pad navigasyonu gibi alternatif geri bildirim mekanizmaları oluşturmasını sağlayan platform API'leri sağlar.

Cihaz uygulamaları üçüncü taraf erişilebilirlik hizmetlerini destekliyorsa, bunlar:

  • [C-1] , APSUNABLE APIS SDK dokümantasyonunda açıklandığı gibi Android Erişilebilirlik Çerçevesinin uygulanmasını sağlamalıdır.
  • [C-1-2] erişilebilirlik olayları oluşturmalı ve SDK'da belgelendiği gibi tüm kayıtlı AccessibilityService uygulamalarına uygun AccessibilityEvent sunmalıdır.
  • [C-1-3] android.settings.ACCESSIBILITY_SETTINGS onurlandırmalıdır. Önceden yüklenmiş erişilebilirlik hizmetlerinin yanı sıra üçüncü taraf erişilebilirlik hizmetlerini etkinleştirmek ve devre dışı bırakmak için kullanıcı tarafından erişilebilir bir mekanizma sağlamak amacıyla.
  • [C-1-4] Sistemin gezinme çubuğuna bir düğme eklemelidir ve etkinleştirilebilir erişilebilirlik hizmetleri AccessibilityServiceInfo.FLAG_REQUEST_ACCESSIBILITY_BUTTON bildirdiğinde kullanıcının erişilebilirlik hizmetini kontrol etmesini sağlar. Sistem navigasyon çubuğu olmayan cihaz uygulamaları için bu gereksinimin uygulanamadığını, ancak cihaz uygulamalarının bu erişilebilirlik hizmetlerini kontrol etmek için bir kullanıcı uygunluğu sağlaması gerektiğini unutmayın.

Cihaz uygulamaları önceden yüklenmiş erişilebilirlik hizmetleri içeriyorsa, bunlar:

  • [C-2-1], veri depolama dosya tabanlı şifreleme (FBE) ile şifrelendiğinde bu önceden yüklenmiş erişilebilirlik hizmetlerini doğrudan önyükleme farkında uygulamaları olarak uygulamalıdır.
  • SHOULD provide a mechanism in the out-of-box setup flow for users to enable relevant accessibility services, as well as options to adjust the font size, display size and magnification gestures.

3.11. Konuşma metni

Android includes APIs that allow applications to make use of text-to-speech (TTS) services and allows service providers to provide implementations of TTS services.

If device implementations reporting the feature android.hardware.audio.output, they:

If device implementations support installation of third-party TTS engines, they:

  • [C-2-1] MUST provide user affordance to allow the user to select a TTS engine for use at system level.

3.12. TV Giriş Çerçevesi

Android Televizyon Giriş Çerçevesi (TIF), canlı içeriğin Android televizyon cihazlarına teslimatını basitleştirir. TIF, Android televizyon cihazlarını kontrol eden giriş modülleri oluşturmak için standart bir API sağlar.

If device implementations support TIF, they:

  • [C-1-1] MUST declare the platform feature android.software.live_tv .
  • [C-1-2] MUST support all TIF APIs such that an application which uses these APIs and the third-party TIF-based inputs service can be installed and used on the device.

3.13. Hızlı Ayarlar

Android provides a Quick Settings UI component that allows quick access to frequently used or urgently needed actions.

If device implementations include a Quick Settings UI component, they:

  • [C-1-1] MUST allow the user to add or remove the tiles provided through the quicksettings APIs from a third-party app.
  • [C-1-2] MUST NOT automatically add a tile from a third-party app directly to the Quick Settings.
  • [C-1-3] MUST display all the user-added tiles from third-party apps alongside the system-provided quick setting tiles.

3.14. Media UI

If device implementations include the UI framework that supports third-party apps that depend on MediaBrowser and MediaSession , they:

3.15. Anında Uygulamalar

Device implementations MUST satisfy the following requirements:

  • [C-0-1] Instant Apps MUST only be granted permissions that have the android:protectionLevel set to "instant" .
  • [C-0-2] Instant Apps MUST NOT interact with installed apps via implicit intents unless one of the following is true:
    • The component's intent pattern filter is exposed and has CATEGORY_BROWSABLE
    • The action is one of ACTION_SEND, ACTION_SENDTO, ACTION_SEND_MULTIPLE
    • The target is explicitly exposed with android:visibleToInstantApps
  • [C-0-3] Instant Apps MUST NOT interact explicitly with installed apps unless the component is exposed via android:visibleToInstantApps.
  • [C-0-4] IInstalled Apps MUST NOT see details about Instant Apps on the device unless the Instant App explicitly connects to the installed application.

3.16. Companion Device Pairing

Android includes support for companion device pairing to more effectively manage association with companion devices and provides the CompanionDeviceManager API for apps to access this feature.

If device implementations support the companion device pairing feature, they:

  • [C-1-1] MUST declare the feature flag FEATURE_COMPANION_DEVICE_SETUP .
  • [C-1-2] MUST ensure the APIs in the android.companion package is fully implemented.
  • [C-1-3] MUST provide user affordances for the user to select/confirm a companion device is present and operational.

3.17. Heavyweight Apps

If device implementations declare the feature FEATURE_CANT_SAVE_STATE , then they:

  • [C-1-1] MUST have only one installed app that specifies cantSaveState running in the system at a time. If the user leaves such an app without explicitly exiting it (for example by pressing home while leaving an active activity the system, instead of pressing back with no remaining active activities in the system), then device implementations MUST prioritize that app in RAM as they do for other things that are expected to remain running, such as foreground services. While such an app is in the background, the system can still apply power management features to it, such as limiting CPU and network access.
  • [C-1-2] MUST provide a UI affordance to chose the app that won't participate in the normal state save/restore mechanism once the user launches a second app declared with cantSaveState attribute.
  • [C-1-3] MUST NOT apply other changes in policy to apps that specify cantSaveState , such as changing CPU performance or changing scheduling prioritization.

If device implementations don't declare the feature FEATURE_CANT_SAVE_STATE , then they:

  • [C-1-1] MUST ignore the cantSaveState attribute set by apps and MUST NOT change the app behavior based on that attribute.

4. Uygulama Paketleme Uyumluluğu

Devices implementations:

  • [C-0-1] MUST be capable of installing and running Android “.apk” files as generated by the “aapt” tool included in the official Android SDK .
  • As the above requirement may be challenging, device implementations are RECOMMENDED to use the AOSP reference implementation's package management system.

Cihaz uygulamaları:

  • [C-0-2] MUST support verifying “.apk” files using the APK Signature Scheme v3 , APK Signature Scheme v2 and JAR signing .
  • [C-0-3] MUST NOT extend either the .apk , Android Manifest , Dalvik bytecode , or RenderScript bytecode formats in such a way that would prevent those files from installing and running correctly on other compatible devices.
  • [C-0-4] MUST NOT allow apps other than the current "installer of record" for the package to silently uninstall the app without any user confirmation, as documented in the SDK for the DELETE_PACKAGE permission. The only exceptions are the system package verifier app handling PACKAGE_NEEDS_VERIFICATION intent and the storage manager app handling ACTION_MANAGE_STORAGE intent.

  • [C-0-5] MUST have an activity that handles the android.settings.MANAGE_UNKNOWN_APP_SOURCES intent.

  • [C-0-6] MUST NOT install application packages from unknown sources, unless the app that requests the installation meets all the following requirements:

    • It MUST declare the REQUEST_INSTALL_PACKAGES permission or have the android:targetSdkVersion set at 24 or lower.
    • It MUST have been granted permission by the user to install apps from unknown sources.
  • SHOULD provide a user affordance to grant/revoke the permission to install apps from unknown sources per application, but MAY choose to implement this as a no-op and return RESULT_CANCELED for startActivityForResult() , if the device implementation does not want to allow users to have this choice. However, even in such cases, they SHOULD indicate to the user why there is no such choice presented.

  • [C-0-7] MUST display a warning dialog with the warning string that is provided through the system API PackageManager.setHarmfulAppWarning to the user before launching an activity in an application that has been marked by the same system API PackageManager.setHarmfulAppWarning as potentially zararlı.

  • SHOULD provide a user affordance to choose to uninstall or launch an application on the warning dialog.

5. Multimedya Uyumluluğu

Cihaz uygulamaları:

  • [C-0-1] MUST support the media formats, encoders, decoders, file types, and container formats defined in section 5.1 for each and every codec declared by MediaCodecList .
  • [C-0-2] MUST declare and report support of the encoders, decoders available to third-party applications via MediaCodecList .
  • [C-0-3] MUST be able to decode and make available to third-party apps all the formats it can encode. This includes all bitstreams that its encoders generate and the profiles reported in its CamcorderProfile .

Cihaz uygulamaları:

  • SHOULD aim for minimum codec latency, in others words, they
    • SHOULD NOT consume and store input buffers and return input buffers only once processed.
    • SHOULD NOT hold onto decoded buffers for longer than as specified by the standard (eg SPS).
    • SHOULD NOT hold onto encoded buffers longer than required by the GOP structure.

All of the codecs listed in the section below are provided as software implementations in the preferred Android implementation from the Android Open Source Project.

Ne Google ne de açık telefon ittifakının bu kodeklerin üçüncü taraf patentlerden kurtulduğunu gösteren herhangi bir temsil yapmadığını lütfen unutmayın. Bu kaynak kodunu donanım veya yazılım ürünlerinde kullanmak isteyenlere, açık kaynak yazılım veya paylaşılan yazılım da dahil olmak üzere bu kodun uygulanmasının, ilgili patent sahiplerinden patent lisansları gerektirebileceği tavsiye edilir.

5.1. Medya Codec'leri

5.1.1. Audio Encoding

See more details in 5.1.3. Audio Codecs Details .

If device implementations declare android.hardware.microphone , they MUST support the following audio encoding:

  • [C-1-1] PCM/WAVE

5.1.2. Audio Decoding

See more details in 5.1.3. Audio Codecs Details .

If device implementations declare support for the android.hardware.audio.output feature, they must support decoding the following audio formats:

  • [C-1-1] MPEG-4 AAC Profile (AAC LC)
  • [C-1-2] MPEG-4 HE AAC Profile (AAC+)
  • [C-1-3] MPEG-4 HE AACv2 Profile (enhanced AAC+)
  • [C-1-4] AAC ELD (enhanced low delay AAC)
  • [C-1-11] xHE-AAC (ISO/IEC 23003-3 Extended HE AAC Profile, which includes the USAC Baseline Profile, and ISO/IEC 23003-4 Dynamic Range Control Profile)
  • [C-1-5] FLAC
  • [C-1-6] MP3
  • [C-1-7] MIDI
  • [C-1-8] Vorbis
  • [C-1-9] PCM/WAVE
  • [C-1-10] Opus

If device implementations support the decoding of AAC input buffers of multichannel streams (ie more than two channels) to PCM through the default AAC audio decoder in the android.media.MediaCodec API, the following MUST be supported:

  • [C-2-1] Decoding MUST be performed without downmixing (eg a 5.0 AAC stream must be decoded to five channels of PCM, a 5.1 AAC stream must be decoded to six channels of PCM).
  • [C-2-2] Dynamic range metadata MUST be as defined in "Dynamic Range Control (DRC)" in ISO/IEC 14496-3, and the android.media.MediaFormat DRC keys to configure the dynamic range-related behaviors of the audio decoder. The AAC DRC keys were introduced in API 21,and are: KEY_AAC_DRC_ATTENUATION_FACTOR , KEY_AAC_DRC_BOOST_FACTOR , KEY_AAC_DRC_HEAVY_COMPRESSION , KEY_AAC_DRC_TARGET_REFERENCE_LEVEL and KEY_AAC_ENCODED_TARGET_LEVEL .

When decoding USAC audio, MPEG-D (ISO/IEC 23003-4):

  • [C-3-1] Loudness and DRC metadata MUST be interpreted and applied according to MPEG-D DRC Dynamic Range Control Profile Level 1.
  • [C-3-2] The decoder MUST behave according to the configuration set with the following android.media.MediaFormat keys: KEY_AAC_DRC_TARGET_REFERENCE_LEVEL and KEY_AAC_DRC_EFFECT_TYPE .

MPEG-4 AAC, HE AAC, and HE AACv2 profile decoders:

  • MAY support loudness and dynamic range control using ISO/IEC 23003-4 Dynamic Range Control Profile.

If ISO/IEC 23003-4 is supported and if both ISO/IEC 23003-4 and ISO/IEC 14496-3 metadata are present in a decoded bitstream, then:

  • ISO/IEC 23003-4 metadata SHALL take precedence.

5.1.3. Audio Codecs Details

Format/Codec Detaylar Supported File Types/Container Formats
MPEG-4 AAC profili
(AAC LC)
Support for mono/stereo/5.0/5.1 content with standard sampling rates from 8 to 48 kHz.
  • 3GPP (.3gp)
  • MPEG-4 (.mp4, .m4a)
  • ADTS raw AAC (.aac, ADIF not supported)
  • MPEG-TS (.ts, not seekable)
MPEG-4 He AAC profili (AAC+) Support for mono/stereo/5.0/5.1 content with standard sampling rates from 16 to 48 kHz.
MPEG-4 HE AACV2
Profil (Geliştirilmiş AAC+)
Support for mono/stereo/5.0/5.1 content with standard sampling rates from 16 to 48 kHz.
AAC ELD (Gelişmiş Düşük Gecikme AAC) 16 ila 48 kHz arasında standart örnekleme oranlarına sahip mono/stereo içerik desteği.
USAC Support for mono/stereo content with standard sampling rates from 7.35 to 48 kHz. MPEG-4 (.mp4, .m4a)
AMR-NB 4.75 to 12.2 kbps sampled @ 8 kHz 3GPP (.3gp)
AMR-WB 9 rates from 6.60 kbit/s to 23.85 kbit/s sampled @ 16 kHz
Flac Mono/stereo (çok kanal yok). Sample rates up to 48 kHz (but up to 44.1 kHz is RECOMMENDED on devices with 44.1 kHz output, as the 48 to 44.1 kHz downsampler does not include a low-pass filter). 16-bit RECOMMENDED; 24 bit için hiçbir şekilde uygulanmadı. Sadece flac (.flac)
MP3 Mono/Stereo 8-320kbps sabit (CBR) veya değişken bit hızı (VBR) MP3 (.mp3)
MİDİ MIDI Tip 0 ve 1. DLS Sürüm 1 ve 2. XMF ve Mobil XMF. RTTTL/RTX, OTA ve iMelody zil sesi formatları desteği
  • Type 0 and 1 (.mid, .xmf, .mxmf)
  • RTTTL/RTX (.rtttl, .rtx)
  • OTA (.ota)
  • iMelody (.imy)
Vorbis
  • Ogg (.ogg)
  • Matroska (.mkv, Android 4.0+)
PCM/Dalga 16 bit doğrusal PCM (donanımın sınırına kadar oranlar). Cihazlar, 8000, 11025, 16000 ve 44100 Hz frekanslarında çiğ PCM kaydı için örnekleme oranlarını desteklemelidir. DALGA (.wav)
başyapıt Matroska (.mkv), Ogg(.ogg)

5.1.4. Image Encoding

See more details in 5.1.6. Image Codecs Details .

Device implementations MUST support encoding the following image encoding:

  • [C-0-1] JPEG
  • [C-0-2] PNG
  • [C-0-3] WebP

5.1.5. Image Decoding

See more details in 5.1.6. Image Codecs Details .

Device implementations MUST support decoding the following image encoding:

  • [C-0-1] JPEG
  • [C-0-2] GIF
  • [C-0-3] PNG
  • [C-0-4] BMP
  • [C-0-5] WebP
  • [C-0-6] Raw
  • [C-0-7] HEIF (HEIC)

5.1.6. Image Codecs Details

Format/Codec Detaylar Supported File Types/Container Formats
JPEG Taban+ilerici JPEG (.jpg)
GIF GIF (.GIF)
PNG PNG (.png)
BMP BMP (.bmp)
WebP WebP (.Webp)
Çiğ ARW (.arw), CR2 (.cr2), DNG (.dng), NEF (.nef), NRW (.nrw), ORF (.orf), PEF (.pef), RAF (.raf), RW2 (.rw2), SRW (.srw)
HEIF Image, Image collection, Image sequence HEIF (.heif), HEIC (.heic)

5.1.7. Video Codec'leri

  • For acceptable quality of web video streaming and video-conference services, device implementations SHOULD use a hardware VP8 codec that meets the requirements .

If device implementations include a video decoder or encoder:

  • [C-1-1] Video codecs MUST support output and input bytebuffer sizes that accommodate the largest feasible compressed and uncompressed frame as dictated by the standard and configuration but also not overallocate.

  • [C-1-2] Video encoders and decoders MUST support YUV420 flexible color format (COLOR_FormatYUV420Flexible).

If device implementations advertise HDR profile support through Display.HdrCapabilities , they:

  • [C-2-1] MUST support HDR static metadata parsing and handling.

If device implementations advertise intra refresh support through FEATURE_IntraRefresh in the MediaCodecInfo.CodecCapabilities class, they:

  • [C-3-1] MUST support the refresh periods in the range of 10 - 60 frames and accurately operate within 20% of configured refresh period.

5.1.8. Video Codecs List

Format/Codec Detaylar Supported File Types/
Container Formats
H.263
  • 3GPP (.3gp)
  • MPEG-4 (.mp4)
H.264 AVC Ayrıntılar için Bölüm 5.2 ve 5.3'e bakın
  • 3GPP (.3gp)
  • MPEG-4 (.mp4)
  • MPEG-2 TS (.ts, AAC audio only, not seekable, Android 3.0+)
H.265 HEVC Ayrıntılar için Bölüm 5.3'e bakın MPEG-4 (.mp4)
MPEG-2 Ana Profil MPEG2-TS
MPEG-4 SP 3GPP (.3gp)
VP8 Ayrıntılar için Bölüm 5.2 ve 5.3'e bakın
VP9 Ayrıntılar için Bölüm 5.3'e bakın

5.2. Video Kodlama

If device implementations support any video encoder and make it available to third-party apps, they:

  • SHOULD NOT be, over two sliding windows, more than ~15% over the bitrate between intraframe (I-frame) intervals.
  • SHOULD NOT be more than ~100% over the bitrate over a sliding window of 1 second.

If device implementations include an embedded screen display with the diagonal length of at least 2.5 inches or include a video output port or declare the support of a camera via the android.hardware.camera.any feature flag, they:

  • [C-1-1] MUST include the support of at least one of the VP8 or H.264 video encoders, and make it available for third-party applications.
  • SHOULD support both VP8 and H.264 video encoders, and make it available for third-party applications.

If device implementations support any of the H.264, VP8, VP9 or HEVC video encoders and make it available to third-party applications, they:

  • [C-2-1] MUST support dynamically configurable bitrates.
  • SHOULD support variable frame rates, where video encoder SHOULD determine instantaneous frame duration based on the timestamps of input buffers, and allocate its bit bucket based on that frame duration.

If device implementations support the MPEG-4 SP video encoder and make it available to third-party apps, they:

  • SHOULD support dynamically configurable bitrates for the supported encoder.

5.2.1. H.263

If device implementations support H.263 encoders and make it available to third-party apps, they:

  • [C-1-1] MUST support Baseline Profile Level 45.
  • SHOULD support dynamically configurable bitrates for the supported encoder.

5.2.2. H-264

If device implementations support H.264 codec, they:

  • [C-1-1] MUST support Baseline Profile Level 3. However, support for ASO (Arbitrary Slice Ordering), FMO (Flexible Macroblock Ordering) and RS (Redundant Slices) is OPTIONAL. Moreover, to maintain compatibility with other Android devices, it is RECOMMENDED that ASO, FMO and RS are not used for Baseline Profile by encoders.
  • [C-1-2] MUST support the SD (Standard Definition) video encoding profiles in the following table.
  • SHOULD support Main Profile Level 4.
  • SHOULD support the HD (High Definition) video encoding profiles as indicated in the following table.

If device implementations report support of H.264 encoding for 720p or 1080p resolution videos through the media APIs, they:

  • [C-2-1] MUST support the encoding profiles in the following table.
SD (düşük kalite) SD (yüksek kalite) HD 720p HD 1080p
Video çözünürlüğü 320 x 240 px 720 x 480 px 1280x720 piksel 1920x1080 piksel
Video kare hızı 20 fps 30 fps 30 fps 30 fps
Video bit hızı 384 Kbps 2 Mbps 4 Mb/sn 10 Mb/sn

5.2.3. VP8

If device implementations support VP8 codec, they:

  • [C-1-1] MUST support the SD video encoding profiles.
  • SHOULD support the following HD (High Definition) video encoding profiles.
  • SHOULD support writing Matroska WebM files.
  • SHOULD use a hardware VP8 codec that meets the WebM project RTC hardware coding requirements , to ensure acceptable quality of web video streaming and video-conference services.

If device implementations report support of VP8 encoding for 720p or 1080p resolution videos through the media APIs, they:

  • [C-2-1] MUST support the encoding profiles in the following table.
SD (düşük kalite) SD (yüksek kalite) HD 720p HD 1080p
Video çözünürlüğü 320 x 180 px 640 x 360 px 1280x720 piksel 1920x1080 piksel
Video kare hızı 30 fps 30 fps 30 fps 30 fps
Video bit hızı 800 kbps 2 Mbps 4 Mb/sn 10 Mb/sn

5.2.4. VP9

If device implementations support VP9 codec, they:

  • SHOULD support writing Matroska WebM files.

5.3. Video Kod Çözme

If device implementations support VP8, VP9, H.264, or H.265 codecs, they:

  • [C-1-1] MUST support dynamic video resolution and frame rate switching through the standard Android APIs within the same stream for all VP8, VP9, H.264, and H.265 codecs in real time and up to the maximum resolution supported by each codec on the device.

If device implementations declare support for the Dolby Vision decoder through HDR_TYPE_DOLBY_VISION , they:

  • [C-2-1] MUST provide a Dolby Vision-capable extractor.
  • [C-2-2] MUST properly display Dolby Vision content on the device screen or on a standard video output port (eg, HDMI).
  • [C-2-3] MUST set the track index of backward-compatible base-layer(s) (if present) to be the same as the combined Dolby Vision layer's track index.

5.3.1. MPEG-2

If device implementations support MPEG-2 decoders, they:

  • [C-1-1] MUST support the Main Profile High Level.

5.3.2. H.263

If device implementations support H.263 decoders, they:

  • [C-1-1] MUST support Baseline Profile Level 30 and Level 45.

5.3.3. MPEG-4

If device implementations with MPEG-4 decoders, they:

  • [C-1-1] MUST support Simple Profile Level 3.

5.3.4. H.264

If device implementations support H.264 decoders, they:

  • [C-1-1] MUST support Main Profile Level 3.1 and Baseline Profile. Support for ASO (Arbitrary Slice Ordering), FMO (Flexible Macroblock Ordering) and RS (Redundant Slices) is OPTIONAL.
  • [C-1-2] MUST be capable of decoding videos with the SD (Standard Definition) profiles listed in the following table and encoded with the Baseline Profile and Main Profile Level 3.1 (including 720p30).
  • SHOULD be capable of decoding videos with the HD (High Definition) profiles as indicated in the following table.

If the height that is reported by the Display.getSupportedModes() method is equal or greater than the video resolution, device implementations:

  • [C-2-1] MUST support the HD 720p video decoding profiles in the following table.
  • [C-2-2] MUST support the HD 1080p video decoding profiles in the following table.
SD (düşük kalite) SD (yüksek kalite) HD 720p HD 1080p
Video çözünürlüğü 320 x 240 px 720 x 480 px 1280x720 piksel 1920x1080 piksel
Video kare hızı 30 fps 30 fps 60 fps 30 fps (60 fps Television )
Video bit hızı 800 kbps 2 Mbps 8 Mbps 20 Mbps

5.3.5. H.265 (HEVC)

If device implementations support H.265 codec, they:

  • [C-1-1] MUST support the Main Profile Level 3 Main tier and the SD video decoding profiles as indicated in the following table.
  • SHOULD support the HD decoding profiles as indicated in the following table.
  • [C-1-2] MUST support the HD decoding profiles as indicated in the following table if there is a hardware decoder.

If the height that is reported by the Display.getSupportedModes() method is equal to or greater than the video resolution, then:

  • [C-2-1] Device implementations MUST support at least one of H.265 or VP9 decoding of 720, 1080 and UHD profiles.
SD (düşük kalite) SD (yüksek kalite) HD 720p HD 1080p UHD
Video çözünürlüğü 352 x 288 px 720 x 480 px 1280x720 piksel 1920x1080 piksel 3840 x 2160 piksel
Video kare hızı 30 fps 30 fps 30 fps 30/60 fps (60 fps Television with H.265 hardware decoding ) 60 fps
Video bit hızı 600 kbps 1.6 Mbps 4 Mb/sn 5 Mbps 20 Mbps

5.3.6. VP8

If device implementations support VP8 codec, they:

  • [C-1-1] MUST support the SD decoding profiles in the following table.
  • SHOULD use a hardware VP8 codec that meets the requirements .
  • SHOULD support the HD decoding profiles in the following table.

If the height as reported by the Display.getSupportedModes() method is equal or greater than the video resolution, then:

  • [C-2-1] Device implementations MUST support 720p profiles in the following table.
  • [C-2-2] Device implementations MUST support 1080p profiles in the following table.
SD (düşük kalite) SD (yüksek kalite) HD 720p HD 1080p
Video çözünürlüğü 320 x 180 px 640 x 360 px 1280x720 piksel 1920x1080 piksel
Video kare hızı 30 fps 30 fps 30 fps (60 fps Television ) 30 (60 fps Television )
Video bit hızı 800 kbps 2 Mbps 8 Mbps 20 Mbps

5.3.7. VP9

If device implementations support VP9 codec, they:

  • [C-1-1] MUST support the SD video decoding profiles as indicated in the following table.
  • SHOULD support the HD decoding profiles as indicated in the following table.

If device implementations support VP9 codec and a hardware decoder:

  • [C-2-1] MUST support the HD decoding profiles as indicated in the following table.

If the height that is reported by the Display.getSupportedModes() method is equal to or greater than the video resolution, then:

  • [C-3-1] Device implementations MUST support at least one of VP9 or H.265 decoding of the 720, 1080 and UHD profiles.
SD (düşük kalite) SD (yüksek kalite) HD 720p HD 1080p UHD
Video çözünürlüğü 320 x 180 px 640 x 360 px 1280x720 piksel 1920x1080 piksel 3840 x 2160 piksel
Video kare hızı 30 fps 30 fps 30 fps 30 fps (60 fps Television with VP9 hardware decoding ) 60 fps
Video bit hızı 600 kbps 1.6 Mbps 4 Mb/sn 5 Mbps 20 Mbps

5.4. Ses kaydı

While some of the requirements outlined in this section are listed as SHOULD since Android 4.3, the Compatibility Definition for future versions are planned to change these to MUST. Existing and new Android devices are STRONGLY RECOMMENDED to meet these requirements that are listed as SHOULD, or they will not be able to attain Android compatibility when upgraded to the future version.

5.4.1. Ham Ses Yakalama

If device implementations declare android.hardware.microphone , they:

  • [C-1-1] MUST allow capture of raw audio content with the following characteristics:

    • Biçim : Doğrusal PCM, 16 bit
    • Sampling rates : 8000, 11025, 16000, 44100 Hz
    • Kanallar : Mono
  • [C-1-2] MUST capture at above sample rates without up-sampling.

  • [C-1-3] MUST include an appropriate anti-aliasing filter when the sample rates given above are captured with down-sampling.
  • SHOULD allow AM radio and DVD quality capture of raw audio content, which means the following characteristics:

    • Biçim : Doğrusal PCM, 16 bit
    • Sampling rates : 22050, 48000 Hz
    • Kanallar : Stereo

If device implementations allow AM radio and DVD quality capture of raw audio content, they:

  • [C-2-1] MUST capture without up-sampling at any ratio higher than 16000:22050 or 44100:48000.
  • [C-2-2] MUST include an appropriate anti-aliasing filter for any up-sampling or down-sampling.

5.4.2. Ses Tanıma için Yakalama

If device implementations declare android.hardware.microphone , they:

  • [C-1-1] MUST capture android.media.MediaRecorder.AudioSource.VOICE_RECOGNITION audio source at one of the sampling rates, 44100 and 48000.
  • [C-1-2] MUST, by default, disable any noise reduction audio processing when recording an audio stream from the AudioSource.VOICE_RECOGNITION audio source.
  • [C-1-3] MUST, by default, disable any automatic gain control when recording an audio stream from the AudioSource.VOICE_RECOGNITION audio source.
  • SHOULD record the voice recognition audio stream with approximately flat amplitude versus frequency characteristics: specifically, ±3 dB, from 100 Hz to 4000 Hz.
  • SHOULD record the voice recognition audio stream with input sensitivity set such that a 90 dB sound power level (SPL) source at 1000 Hz yields RMS of 2500 for 16-bit samples.
  • SHOULD record the voice recognition audio stream so that the PCM amplitude levels linearly track input SPL changes over at least a 30 dB range from -18 dB to +12 dB re 90 dB SPL at the microphone.
  • SHOULD record the voice recognition audio stream with total harmonic distortion (THD) less than 1% for 1 kHz at 90 dB SPL input level at the microphone.

If device implementations declare android.hardware.microphone and noise suppression (reduction) technologies tuned for speech recognition, they:

  • [C-2-1] MUST allow this audio affect to be controllable with the android.media.audiofx.NoiseSuppressor API.
  • [C-2-2] MUST uniquely identify each noise suppression technology implementation via the AudioEffect.Descriptor.uuid field.

5.4.3. Oynatmanın Yeniden Yönlendirilmesi için Yakalama

android.media.MediaRecorder.AudioSource sınıfı REMOTE_SUBMIX ses kaynağını içerir.

If device implementations declare both android.hardware.audio.output and android.hardware.microphone , they:

  • [C-1-1] MUST properly implement the REMOTE_SUBMIX audio source so that when an application uses the android.media.AudioRecord API to record from this audio source, it captures a mix of all audio streams except for the following:

    • AudioManager.STREAM_RING
    • AudioManager.STREAM_ALARM
    • AudioManager.STREAM_NOTIFICATION

5.5. Ses Çalma

Android includes the support to allow apps to playback audio through the audio output peripheral as defined in section 7.8.2.

5.5.1. Ham Ses Çalma

If device implementations declare android.hardware.audio.output , they:

  • [C-1-1] MUST allow playback of raw audio content with the following characteristics:

    • Format : Linear PCM, 16-bit, 8-bit, float
    • Channels : Mono, Stereo, valid multichannel configurations with up to 8 channels
    • Sampling rates (in Hz) :
      • 8000, 11025, 16000, 22050, 32000, 44100, 48000 at the channel configurations listed above
      • 96000 in mono and stereo
  • SHOULD allow playback of raw audio content with the following characteristics:

    • Örnekleme Oranları : 24000, 48000

5.5.2. Ses Efektleri

Android provides an API for audio effects for device implementations.

If device implementations declare the feature android.hardware.audio.output , they:

  • [C-1-1] MUST support the EFFECT_TYPE_EQUALIZER and EFFECT_TYPE_LOUDNESS_ENHANCER implementations controllable through the AudioEffect subclasses Equalizer , LoudnessEnhancer .
  • [C-1-2] MUST support the visualizer API implementation, controllable through the Visualizer class.
  • [C-1-3] MUST support the EFFECT_TYPE_DYNAMICS_PROCESSING implementation controllable through the AudioEffect subclass DynamicsProcessing .
  • SHOULD support the EFFECT_TYPE_BASS_BOOST , EFFECT_TYPE_ENV_REVERB , EFFECT_TYPE_PRESET_REVERB , and EFFECT_TYPE_VIRTUALIZER implementations controllable through the AudioEffect sub-classes BassBoost , EnvironmentalReverb , PresetReverb , and Virtualizer .

5.5.3. Ses Çıkışı Ses Düzeyi

Otomotiv cihaz uygulamaları:

  • SHOULD allow adjusting audio volume separately per each audio stream using the content type or usage as defined by AudioAttributes and car audio usage as publicly defined in android.car.CarAudioManager .

5.6. Ses Gecikmesi

Bir ses sinyali bir sistemden geçtikçe ses gecikmesi zaman gecikmesidir. Birçok uygulama sınıfı, gerçek zamanlı ses efektleri elde etmek için kısa gecikmelere dayanır.

Bu bölümün amaçları için aşağıdaki tanımları kullanın:

  • output latency . The interval between when an application writes a frame of PCM-coded data and when the corresponding sound is presented to environment at an on-device transducer or signal leaves the device via a port and can be observed externally.
  • cold output latency . The output latency for the first frame, when the audio output system has been idle and powered down prior to the request.
  • continuous output latency . The output latency for subsequent frames, after the device is playing audio.
  • input latency . The interval between when a sound is presented by environment to device at an on-device transducer or signal enters the device via a port and when an application reads the corresponding frame of PCM-coded data.
  • lost input . The initial portion of an input signal that is unusable or unavailable.
  • cold input latency . The sum of lost input time and the input latency for the first frame, when the audio input system has been idle and powered down prior to the request.
  • continuous input latency . The input latency for subsequent frames, while the device is capturing audio.
  • cold output jitter . The variability among separate measurements of cold output latency values.
  • cold input jitter . The variability among separate measurements of cold input latency values.
  • continuous round-trip latency . The sum of continuous input latency plus continuous output latency plus one buffer period. The buffer period allows time for the app to process the signal and time for the app to mitigate phase difference between input and output streams.
  • OpenSL ES PCM buffer queue API . The set of PCM-related OpenSL ES APIs within Android NDK .
  • AAudio native audio API . The set of AAudio APIs within Android NDK .
  • Timestamp . A pair consisting of a relative frame position within a stream and the estimated time when that frame enters or leaves the audio processing pipeline on the associated endpoint. See also AudioTimestamp .

If device implementations declare android.hardware.audio.output they are STRONGLY RECOMMENDED to meet or exceed the following requirements:

  • [C-SR] Cold output latency of 100 milliseconds or less
  • [C-SR] Continuous output latency of 45 milliseconds or less
  • [C-SR] Minimize the cold output jitter
  • [C-SR] The output timestamp returned by AudioTrack.getTimestamp and AAudioStream_getTimestamp is accurate to +/- 1 ms.

If device implementations meet the above requirements, after any initial calibration, when using both the OpenSL ES PCM buffer queue and AAudio native audio APIs, for continuous output latency and cold output latency over at least one supported audio output device, they are:

If device implementations do not meet the requirements for low-latency audio via both the OpenSL ES PCM buffer queue and AAudio native audio APIs, they:

  • [C-1-1] MUST NOT report support for low-latency audio.

If device implementations include android.hardware.microphone , they are STRONGLY RECOMMENDED to meet these input audio requirements:

  • [C-SR] Cold input latency of 100 milliseconds or less.
  • [C-SR] Continuous input latency of 30 milliseconds or less.
  • [C-SR] Continuous round-trip latency of 50 milliseconds or less.
  • [C-SR] Minimize the cold input jitter.
  • [C-SR] Limit the error in input timestamps, as returned by AudioRecord.getTimestamp or AAudioStream_getTimestamp , to +/- 1 ms.

5.7. Ağ Protokolleri

Device implementations MUST support the media network protocols for audio and video playback as specified in the Android SDK documentation.

If device implementations include an audio or a video decoder, they:

  • [C-1-1] MUST support all required codecs and container formats in section 5.1 over HTTP(S).

  • [C-1-2] MUST support the media segment formats shown in the Media Segment Formats table below over HTTP Live Streaming draft protocol, Version 7 .

  • [C-1-3] MUST support the following RTP audio video profile and related codecs in the RTSP table below. For exceptions please see the table footnotes in section 5.1 .

Media Segment Formats

Segment formats Referanslar) Required codec support
MPEG-2 Transport Stream ISO 13818 Video codecs:
  • H264 AVC
  • MPEG-4 SP
  • MPEG-2
See section 5.1.3 for details on H264 AVC, MPEG2-4 SP,
and MPEG-2.

Audio codecs:

  • AAC
See section 5.1.1 for details on AAC and its variants.
AAC with ADTS framing and ID3 tags ISO 13818-7 See section 5.1.1 for details on AAC and its variants
WebVTT WebVTT

RTSP (RTP, SDP)

Profil ismi Referanslar) Required codec support
H264 AVC RFC 6184 See section 5.1.3 for details on H264 AVC
MP4A-LATM RFC 6416 See section 5.1.1 for details on AAC and its variants
H263-1998 RFC 3551
RFC 4629
RFC 2190
See section 5.1.3 for details on H263
H263-2000 RFC 4629 See section 5.1.3 for details on H263
AMR RFC 4867 See section 5.1.1 for details on AMR-NB
AMR-WB RFC 4867 See section 5.1.1 for details on AMR-WB
MP4V-ES RFC 6416 See section 5.1.3 for details on MPEG-4 SP
mpeg4-generic RFC 3640 See section 5.1.1 for details on AAC and its variants
MP2T RFC 2250 See MPEG-2 Transport Stream underneath HTTP Live Streaming for details

5.8. Güvenli Medya

If device implementations support secure video output and are capable of supporting secure surfaces, they:

  • [C-1-1] MUST declare support for Display.FLAG_SECURE .

If device implementations declare support for Display.FLAG_SECURE and support wireless display protocol, they:

  • [C-2-1] MUST secure the link with a cryptographically strong mechanism such as HDCP 2.x or higher for the displays connected through wireless protocols such as Miracast.

If device implementations declare support for Display.FLAG_SECURE and support wired external display, they:

  • [C-3-1] MUST support HDCP 1.2 or higher for all external displays connected via a user-accessible wired port.

5.9. Musical Instrument Digital Interface (MIDI)

If device implementations report support for feature android.software.midi via the android.content.pm.PackageManager class, they:

  • [C-1-1] MUST support MIDI over all MIDI-capable hardware transports for which they provide generic non-MIDI connectivity, where such transports are:

  • [C-1-2] MUST support the inter-app MIDI software transport (virtual MIDI devices)

5.10. Profesyonel Ses

If device implementations report support for feature android.hardware.audio.pro via the android.content.pm.PackageManager class, they:

  • [C-1-1] MUST report support for feature android.hardware.audio.low_latency .
  • [C-1-2] MUST have the continuous round-trip audio latency, as defined in section 5.6 Audio Latency , MUST be 20 milliseconds or less and SHOULD be 10 milliseconds or less over at least one supported path.
  • [C-1-3] MUST include a USB port(s) supporting USB host mode and USB peripheral mode.
  • [C-1-4] MUST report support for feature android.software.midi .
  • [C-1-5] MUST meet latencies and USB audio requirements using both the OpenSL ES PCM buffer queue and AAudio native audio APIs.
  • [SR] Are STRONGLY RECOMMENDED to provide a consistent level of CPU performance while audio is active and CPU load is varying. This should be tested using SimpleSynth commit 1bd6391 . The SimpleSynth app needs to be run with below parameters and achieve zero underruns after 10 minutes:
    • Work cycles: 200,000
    • Variable load: ON (this will switch between 100% and 10% of the work cycles value every 2 seconds and is designed to test CPU governor behavior)
    • Stabilized load: OFF
  • SHOULD minimize audio clock inaccuracy and drift relative to standard time.
  • SHOULD minimize audio clock drift relative to the CPU CLOCK_MONOTONIC when both are active.
  • SHOULD minimize audio latency over on-device transducers.
  • SHOULD minimize audio latency over USB digital audio.
  • SHOULD document audio latency measurements over all paths.
  • SHOULD minimize jitter in audio buffer completion callback entry times, as this affects usable percentage of full CPU bandwidth by the callback.
  • SHOULD provide zero audio underruns (output) or overruns (input) under normal use at reported latency.
  • SHOULD provide zero inter-channel latency difference.
  • SHOULD minimize MIDI mean latency over all transports.
  • SHOULD minimize MIDI latency variability under load (jitter) over all transports.
  • SHOULD provide accurate MIDI timestamps over all transports.
  • SHOULD minimize audio signal noise over on-device transducers, including the period immediately after cold start.
  • SHOULD provide zero audio clock difference between the input and output sides of corresponding end-points, when both are active. Examples of corresponding end-points include the on-device microphone and speaker, or the audio jack input and output.
  • SHOULD handle audio buffer completion callbacks for the input and output sides of corresponding end-points on the same thread when both are active, and enter the output callback immediately after the return from the input callback. Or if it is not feasible to handle the callbacks on the same thread, then enter the output callback shortly after entering the input callback to permit the application to have a consistent timing of the input and output sides.
  • SHOULD minimize the phase difference between HAL audio buffering for the input and output sides of corresponding end-points.
  • SHOULD minimize touch latency.
  • SHOULD minimize touch latency variability under load (jitter).
  • SHOULD have a latency from touch input to audio output of less than or equal to 40 ms.

If device implementations meet all of the above requirements, they:

If device implementations include a 4 conductor 3.5mm audio jack, they:

If device implementations omit a 4 conductor 3.5mm audio jack and include a USB port(s) supporting USB host mode, they:

  • [C-3-1] MUST implement the USB audio class.
  • [C-3-2] MUST have a continuous round-trip audio latency of 20 milliseconds or less over the USB host mode port using USB audio class.
  • The continuous round-trip audio latency SHOULD be 10 milliseconds or less over the USB host mode port using USB audio class.

If device implementations include an HDMI port, they:

  • [C-4-1] MUST support output in stereo and eight channels at 20-bit or 24-bit depth and 192 kHz without bit-depth loss or resampling, in at least one configuration.

5.11. Capture for Unprocessed

Android includes support for recording of unprocessed audio via the android.media.MediaRecorder.AudioSource.UNPROCESSED audio source. In OpenSL ES, it can be accessed with the record preset SL_ANDROID_RECORDING_PRESET_UNPROCESSED .

If device implementations intent to support unprocessed audio source and make it available to third-party apps, they:

  • [C-1-1] MUST report the support through the android.media.AudioManager property PROPERTY_SUPPORT_AUDIO_SOURCE_UNPROCESSED .

  • [C-1-2] MUST exhibit approximately flat amplitude-versus-frequency characteristics in the mid-frequency range: specifically ±10dB from 100 Hz to 7000 Hz for each and every microphone used to record the unprocessed audio source.

  • [C-1-3] MUST exhibit amplitude levels in the low frequency range: specifically from ±20 dB from 5 Hz to 100 Hz compared to the mid-frequency range for each and every microphone used to record the unprocessed audio source.

  • [C-1-4] MUST exhibit amplitude levels in the high frequency range: specifically from ±30 dB from 7000 Hz to 22 KHz compared to the mid-frequency range for each and every microphone used to record the unprocessed audio source.

  • [C-1-5] MUST set audio input sensitivity such that a 1000 Hz sinusoidal tone source played at 94 dB Sound Pressure Level (SPL) yields a response with RMS of 520 for 16 bit-samples (or -36 dB Full Scale for floating point/double precision samples) for each and every microphone used to record the unprocessed audio source.

  • [C-1-6] MUST have a signal-to-noise ratio (SNR) at 60 dB or higher for each and every microphone used to record the unprocessed audio source. (whereas the SNR is measured as the difference between 94 dB SPL and equivalent SPL of self noise, A-weighted).

  • [C-1-7] MUST have a total harmonic distortion (THD) less than be less than 1% for 1 kHZ at 90 dB SPL input level at each and every microphone used to record the unprocessed audio source.

  • MUST not have any other signal processing (eg Automatic Gain Control, High Pass Filter, or Echo cancellation) in the path other than a level multiplier to bring the level to desired range. Başka bir deyişle:

  • [C-1-8] If any signal processing is present in the architecture for any reason, it MUST be disabled and effectively introduce zero delay or extra latency to the signal path.
  • [C-1-9] The level multiplier, while allowed to be on the path, MUST NOT introduce delay or latency to the signal path.

All SPL measurements are made directly next to the microphone under test. For multiple microphone configurations, these requirements apply to each microphone.

If device implementations declare android.hardware.microphone but do not support unprocessed audio source, they:

  • [C-2-1] MUST return null for the AudioManager.getProperty(PROPERTY_SUPPORT_AUDIO_SOURCE_UNPROCESSED) API method, to properly indicate the lack of support.
  • [SR] are still STRONGLY RECOMMENDED to satisfy as many of the requirements for the signal path for the unprocessed recording source.

6. Geliştirici Araçları ve Seçeneklerinin Uyumluluğu

6.1. Geliştirici Araçları

Cihaz uygulamaları:

  • [C-0-1] MUST support the Android Developer Tools provided in the Android SDK.
  • Android Debug Bridge (adb)

    • [C-0-2] MUST support adb as documented in the Android SDK and the shell commands provided in the AOSP, which can be used by app developers, including dumpsys and cmd stats .
    • [C-0-3] MUST NOT alter the format or the contents of device system events (batterystats , diskstats, fingerprint, graphicsstats, netstats, notification, procstats) logged via the dumpsys command.
    • [C-0-10] MUST record, without omission, and make the following events accessible and available to the cmd stats shell command and the StatsManager System API class.
      • ActivityForegroundStateChanged
      • AnomalyDetected
      • AppBreadcrumbReported
      • AppCrashOccurred
      • AppStartOccurred
      • BatteryLevelChanged
      • BatterySaverModeStateChanged
      • BleScanResultReceived
      • BleScanStateChanged
      • ChargingStateChanged
      • DeviceIdleModeStateChanged
      • ForegroundServiceStateChanged
      • GpsScanStateChanged
      • JobStateChanged
      • PluggedStateChanged
      • ScheduledJobStateChanged
      • ScreenStateChanged
      • SyncStateChanged
      • SystemElapsedRealtime
      • UidProcessStateChanged
      • WakelockStateChanged
      • WakeupAlarmOccurred
      • WifiLockStateChanged
      • WifiMulticastLockStateChanged
      • WifiScanStateChanged
    • [C-0-4] MUST have the device-side adb daemon be inactive by default and there MUST be a user-accessible mechanism to turn on the Android Debug Bridge.
    • [C-0-5] MUST support secure adb. Android güvenli ADB desteği içerir. Güvenli ADB, bilinen kimlik doğrulamalı ana bilgisayarlarda ADB'yi etkinleştirir.
    • [C-0-6] MUST provide a mechanism allowing adb to be connected from a host machine. Örneğin:

      • Device implementations without a USB port supporting peripheral mode MUST implement adb via local-area network (such as Ethernet or Wi-Fi).
      • MUST provide drivers for Windows 7, 9 and 10, allowing developers to connect to the device using the adb protocol.
  • Dalvik Debug Monitor Service (ddms)

    • [C-0-7] MUST support all ddms features as documented in the Android SDK. DDMS ADB kullandığından, DDMS desteği varsayılan olarak etkin değil, ancak kullanıcı yukarıdaki gibi Android hata ayıklama köprüsünü etkinleştirdiğinde desteklenmelidir.
  • Maymun
    • [C-0-8] MUST include the Monkey framework and make it available for applications to use.
  • SysTrace
    • [C-0-9] MUST support the systrace tool as documented in the Android SDK. Systrace must be inactive by default and there MUST be a user-accessible mechanism to turn on Systrace.

If device implementations report the support of Vulkan 1.0 or higher via the android.hardware.vulkan.version feature flags, they:

  • [C-1-1] MUST provide an affordance for the app developer to enable/disable GPU debug layers.
  • [C-1-2] MUST, when the GPU debug layers are enabled, enumerate layers in libraries provided by external tools (ie not part of the platform or application package) found in debuggable applications' base directory to support vkEnumerateInstanceLayerProperties() and vkCreateInstance() API methods.

6.2. Geliştirici Seçenekleri

Android, geliştiricilerin uygulama geliştirme ile ilgili ayarları yapılandırmaları için destek içerir.

Device implementations MUST provide a consistent experience for Developer Options, they:

  • [C-0-1] MUST honor the android.settings.APPLICATION_DEVELOPMENT_SETTINGS intent to show application development-related settings. Yukarı Akım Android uygulaması, Varsayılan olarak Geliştirici Seçenekleri menüsünü gizler ve kullanıcıların Ayarlar > Aygıt > Hakkında Yedi (7) kez tuşlarına bastıktan sonra geliştirici seçeneklerini başlatmalarını sağlar.
  • [C-0-2] MUST hide Developer Options by default.
  • [C-0-3] MUST provide a clear mechanism that does not give preferential treatment to one third-party app as opposed to another to enable Developer Options. MUST provide a public visible document or website that describes how to enable Developer Options. This document or website MUST be linkable from the Android SDK documents.
  • SHOULD have an ongoing visual notification to the user when Developer Options is enabled and the safety of the user is of concern.
  • MAY temporarily limit access to the Developer Options menu, by visually hiding or disabling the menu, to prevent distraction for scenarios where the safety of the user is of concern.

7. Donanım Uyumluluğu

If a device includes a particular hardware component that has a corresponding API for third-party developers:

  • [C-0-1] The device implementation MUST implement that API as described in the Android SDK documentation.

SDK'daki bir API, isteğe bağlı olduğu belirtilen bir donanım bileşeniyle etkileşime giriyorsa ve cihaz uygulaması bu bileşene sahip değilse:

  • [C-0-2] Complete class definitions (as documented by the SDK) for the component APIs MUST still be presented.
  • [C-0-3] The API's behaviors MUST be implemented as no-ops in some reasonable fashion.
  • [C-0-4] API methods MUST return null values where permitted by the SDK documentation.
  • [C-0-5] API methods MUST return no-op implementations of classes where null values are not permitted by the SDK documentation.
  • [C-0-6] API methods MUST NOT throw exceptions not documented by the SDK documentation.
  • [C-0-7] Device implementations MUST consistently report accurate hardware configuration information via the getSystemAvailableFeatures() and hasSystemFeature(String) methods on the android.content.pm.PackageManager class for the same build fingerprint.

A typical example of a scenario where these requirements apply is the telephony API: Even on non-phone devices, these APIs must be implemented as reasonable no-ops.

7.1. Ekran ve Grafik

Android includes facilities that automatically adjust application assets and UI layouts appropriately for the device to ensure that third-party applications run well on a variety of hardware configurations . Cihazlar, bu bölümde ayrıntılı olarak açıklandığı gibi bu API'leri ve davranışları düzgün bir şekilde uygulamalıdır.

Bu bölümdeki gereksinimler tarafından atıfta bulunulan birimler aşağıdaki gibi tanımlanmıştır:

  • physical diagonal size . The distance in inches between two opposing corners of the illuminated portion of the display.
  • dots per inch (dpi) . The number of pixels encompassed by a linear horizontal or vertical span of 1”. Where dpi values are listed, both horizontal and vertical dpi must fall within the range.
  • aspect ratio . The ratio of the pixels of the longer dimension to the shorter dimension of the screen. For example, a display of 480x854 pixels would be 854/480 = 1.779, or roughly “16:9”.
  • density-independent pixel (dp) . The virtual pixel unit normalized to a 160 dpi screen, calculated as: pixels = dps * (density/160).

7.1.1. Ekran Yapılandırması

7.1.1.1. Screen Size and Shape

The Android UI framework supports a variety of different logical screen layout sizes, and allows applications to query the current configuration's screen layout size via Configuration.screenLayout with the SCREENLAYOUT_SIZE_MASK and Configuration.smallestScreenWidthDp .

Cihaz uygulamaları:

  • [C-0-1] MUST report the correct layout size for the Configuration.screenLayout as defined in the Android SDK documentation. Specifically, device implementations MUST report the correct logical density-independent pixel (dp) screen dimensions as below:

    • Devices with the Configuration.uiMode set as any value other than UI_MODE_TYPE_WATCH, and reporting a small size for the Configuration.screenLayout , MUST have at least 426 dp x 320 dp.
    • Devices reporting a normal size for the Configuration.screenLayout , MUST have at least 480 dp x 320 dp.
    • Devices reporting a large size for the Configuration.screenLayout , MUST have at least 640 dp x 480 dp.
    • Devices reporting a xlarge size for the Configuration.screenLayout , MUST have at least 960 dp x 720 dp.
  • [C-0-2] MUST correctly honor applications' stated support for screen sizes through the < supports-screens > attribute in the AndroidManifest.xml, as described in the Android SDK documentation.

  • MAY have a display with rounded corners.

If device implementations support UI_MODE_TYPE_NORMAL and include a display with rounded corners, they:

  • [C-1-1] MUST ensure that the radius of the rounded corners is less than or equal to 38 dp.
  • SHOULD include user affordance to switch to the display mode with the rectangular corners.
7.1.1.2. Ekran En Boy Oranı

While there is no restriction to the screen aspect ratio value of the physical screen display, the screen aspect ratio of the logical display that third-party apps are rendered within, as can be derived from the height and width values reported through the view.Display APIs and Configuration API, MUST meet the following requirements:

  • [C-0-1] Device implementations with the Configuration.uiMode set as UI_MODE_TYPE_NORMAL MUST have an aspect ratio value between 1.3333 (4:3) and 1.86 (roughly 16:9), unless the app can be deemed as ready to be stretched longer by meeting one of the following conditions:

    • The app has declared that it supports a larger screen aspect ratio through the android.max_aspect metadata value.
    • The app declares it is resizeable via the android:resizeableActivity attribute.
    • The app is targeting API level 24 or higher and does not declare a android:MaxAspectRatio that would restrict the allowed aspect ratio.
  • [C-0-2] Device implementations with the Configuration.uiMode set as UI_MODE_TYPE_WATCH MUST have an aspect ratio value set as 1.0 (1:1).

7.1.1.3. Ekran Yoğunluğu

Android UI çerçevesi, uygulama geliştiricilerinin uygulama kaynaklarını hedeflemesine yardımcı olmak için bir dizi standart mantıksal yoğunluk tanımlar.

  • [C-0-1] By default, device implementations MUST report only one of the following logical Android framework densities through the DENSITY_DEVICE_STABLE API and this value MUST NOT change at any time; however, the device MAY report a different arbitrary density according to the display configuration changes made by the user (for example, display size) set after initial boot.

    • 120 dpi (ldpi)
    • 160 dpi (mdpi)
    • 213 dpi (tvdpi)
    • 240 dpi (hdpi)
    • 260 dpi (260dpi)
    • 280 DPI (280dpi)
    • 300 dpi (300dpi)
    • 320 dpi (xhdpi)
    • 340 dpi (340dpi)
    • 360 DPI (360dpi)
    • 400 dpi (400dpi)
    • 420 DPI (420dpi)
    • 480 dpi (xxhdpi)
    • 560 dpi (560 dpi)
    • 640 dpi (xxxhdpi)
  • Cihaz uygulamaları, bu mantıksal yoğunluk, rapor edilen ekran boyutunu desteklenen minimumun altına itmedikçe, ekranın fiziksel yoğunluğuna sayısal olarak en yakın standart Android çerçeve yoğunluğunu tanımlamalıdır. Fiziksel yoğunluğa sayısal olarak en yakın olan standart Android çerçeve yoğunluğu, desteklenen en küçük uyumlu ekran boyutundan (320 dp genişliği) daha küçük bir ekran boyutuyla sonuçlanırsa, cihaz uygulamaları bir sonraki en düşük standart Android çerçeve yoğunluğunu bildirmelidir.

If there is an affordance to change the display size of the device:

  • [C-1-1] The display size MUST NOT be scaled any larger than 1.5 times the native density or produce an effective minimum screen dimension smaller than 320dp (equivalent to resource qualifier sw320dp), whichever comes first.
  • [C-1-2] Display size MUST NOT be scaled any smaller than 0.85 times the native density.
  • To ensure good usability and consistent font sizes, it is RECOMMENDED that the following scaling of Native Display options be provided (while complying with the limits specified above)
  • Small: 0.85x
  • Default: 1x (Native display scale)
  • Large: 1.15x
  • Larger: 1.3x
  • Largest 1.45x

7.1.2. Görüntüleme Metrikleri

If device implementations include a screen or video output, they:

If device implementations does not include an embedded screen or video output, they:

  • [C-2-1] MUST report reasonable values for all display metrics defined in the android.util.DisplayMetrics API for the emulated default view.Display .

7.1.3. Ekran Yönü

Cihaz uygulamaları:

  • [C-0-1] MUST report which screen orientations they support ( android.hardware.screen.portrait and/or android.hardware.screen.landscape ) and MUST report at least one supported orientation. For example, a device with a fixed orientation landscape screen, such as a television or laptop, SHOULD only report android.hardware.screen.landscape .
  • [C-0-2] MUST report the correct value for the device's current orientation, whenever queried via the android.content.res.Configuration.orientation , android.view.Display.getOrientation() , or other APIs.

If device implementations support both screen orientations, they:

  • [C-1-1] MUST support dynamic orientation by applications to either portrait or landscape screen orientation. Yani cihazın, uygulamanın belirli bir ekran yönü talebine uyması gerekir.
  • [C-1-2] MUST NOT change the reported screen size or density when changing orientation.
  • MAY select either portrait or landscape orientation as the default.

7.1.4. 2D ve 3D Grafik Hızlandırma

7.1.4.1 OpenGL ES

Cihaz uygulamaları:

  • [C-0-1] MUST correctly identify the supported OpenGL ES versions (1.1, 2.0, 3.0, 3.1, 3.2) through the managed APIs (such as via the GLES10.getString() method) and the native APIs.
  • [C-0-2] MUST include the support for all the corresponding managed APIs and native APIs for every OpenGL ES versions they identified to support.

If device implementations include a screen or video output, they:

  • [C-1-1] MUST support both OpenGL ES 1.1 and 2.0, as embodied and detailed in the Android SDK documentation .
  • [SR] are STRONGLY RECOMMENDED to support OpenGL ES 3.1.
  • SHOULD support OpenGL ES 3.2.

If device implementations support any of the OpenGL ES versions, they:

  • [C-2-1] MUST report via the OpenGL ES managed APIs and native APIs any other OpenGL ES extensions they have implemented, and conversely MUST NOT report extension strings that they do not support.
  • [C-2-2] MUST support the EGL_KHR_image , EGL_KHR_image_base , EGL_ANDROID_image_native_buffer , EGL_ANDROID_get_native_client_buffer , EGL_KHR_wait_sync , EGL_KHR_get_all_proc_addresses , EGL_ANDROID_presentation_time , EGL_KHR_swap_buffers_with_damage and EGL_ANDROID_recordable extensions.
  • [SR] are STRONGLY RECOMMENDED to support EGL_KHR_partial_update.
  • SHOULD accurately report via the getString() method, any texture compression format that they support, which is typically vendor-specific.

If device implementations declare support for OpenGL ES 3.0, 3.1, or 3.2, they:

  • [C-3-1] MUST export the corresponding function symbols for these version in addition to the OpenGL ES 2.0 function symbols in the libGLESv2.so library.

If device implementations support OpenGL ES 3.2, they:

  • [C-4-1] MUST support the OpenGL ES Android Extension Pack in its entirety.

If device implementations support the OpenGL ES Android Extension Pack in its entirety, they:

  • [C-5-1] MUST identify the support through the android.hardware.opengles.aep feature flag.

If device implementations expose support for the EGL_KHR_mutable_render_buffer extension, they:

  • [C-6-1] MUST also support the EGL_ANDROID_front_buffer_auto_refresh extension.
7.1.4.2 Vulkan

Android includes support for Vulkan , a low-overhead, cross-platform API for high-performance 3D graphics.

If device implementations support OpenGL ES 3.1, they:

  • [SR] Are STRONGLY RECOMMENDED to include support for Vulkan 1.1.

If device implementations include a screen or video output, they:

  • SHOULD include support for Vulkan 1.1.

If device implementations include support for Vulkan 1.0, they:

  • [C-1-1] MUST report the correct integer value with the android.hardware.vulkan.level and android.hardware.vulkan.version feature flags.
  • [C-1-2] MUST enumerate, at least one VkPhysicalDevice for the Vulkan native API vkEnumeratePhysicalDevices() .
  • [C-1-3] MUST fully implement the Vulkan 1.0 APIs for each enumerated VkPhysicalDevice .
  • [C-1-4] MUST enumerate layers, contained in native libraries named as libVkLayer*.so in the application package's native library directory, through the Vulkan native APIs vkEnumerateInstanceLayerProperties() and vkEnumerateDeviceLayerProperties() .
  • [C-1-5] MUST NOT enumerate layers provided by libraries outside of the application package, or provide other ways of tracing or intercepting the Vulkan API, unless the application has the android:debuggable attribute set as true .
  • [C-1-6] MUST report all extension strings that they do support via the Vulkan native APIs , and conversely MUST NOT report extension strings that they do not correctly support.
  • [C-1-7] MUST support the VK_KHR_surface, VK_KHR_android_surface, VK_KHR_swapchain, and VK_KHR_incremental_present extensions.

If device implementations do not include support for Vulkan 1.0, they:

  • [C-2-1] MUST NOT declare any of the Vulkan feature flags (eg android.hardware.vulkan.level , android.hardware.vulkan.version ).
  • [C-2-2] MUST NOT enumerate any VkPhysicalDevice for the Vulkan native API vkEnumeratePhysicalDevices() .

If device implementations include support for Vulkan 1.1, they:

  • [C-3-1] MUST expose support for the SYNC_FD external semaphore and handle types.
  • [SR] Are STRONGLY RECOMMENDED to support the VK_ANDROID_external_memory_android_hardware_buffer extension.
7.1.4.3 RenderScript
  • [C-0-1] Device implementations MUST support Android RenderScript , as detailed in the Android SDK documentation.
7.1.4.4 2D Graphics Acceleration

Android includes a mechanism for applications to declare that they want to enable hardware acceleration for 2D graphics at the Application, Activity, Window, or View level through the use of a manifest tag android:hardwareAccelerated or direct API calls.

Cihaz uygulamaları:

  • [C-0-1] MUST enable hardware acceleration by default, and MUST disable hardware acceleration if the developer so requests by setting android:hardwareAccelerated="false” or disabling hardware acceleration directly through the Android View APIs.
  • [C-0-2] MUST exhibit behavior consistent with the Android SDK documentation on hardware acceleration .

Android includes a TextureView object that lets developers directly integrate hardware-accelerated OpenGL ES textures as rendering targets in a UI hierarchy.

Cihaz uygulamaları:

  • [C-0-3] MUST support the TextureView API, and MUST exhibit consistent behavior with the upstream Android implementation.
7.1.4.5 Wide-gamut Displays

If device implementations claim support for wide-gamut displays through Configuration.isScreenWideColorGamut() , they:

  • [C-1-1] MUST have a color-calibrated display.
  • [C-1-2] MUST have a display whose gamut covers the sRGB color gamut entirely in CIE 1931 xyY space.
  • [C-1-3] MUST have a display whose gamut has an area of at least 90% of DCI-P3 in CIE 1931 xyY space.
  • [C-1-4] MUST support OpenGL ES 3.1 or 3.2 and report it properly.
  • [C-1-5] MUST advertise support for the EGL_KHR_no_config_context , EGL_EXT_pixel_format_float , EGL_KHR_gl_colorspace , EGL_EXT_gl_colorspace_scrgb , EGL_EXT_gl_colorspace_scrgb_linear , EGL_EXT_gl_colorspace_display_p3 , and EGL_KHR_gl_colorspace_display_p3 extensions.
  • [SR] Are STRONGLY RECOMMENDED to support GL_EXT_sRGB .

Conversely, if device implementations do not support wide-gamut displays, they:

  • [C-2-1] SHOULD cover 100% or more of sRGB in CIE 1931 xyY space, although the screen color gamut is undefined.

7.1.5. Eski Uygulama Uyumluluk Modu

Android specifies a “compatibility mode” in which the framework operates in a 'normal' screen size equivalent (320dp width) mode for the benefit of legacy applications not developed for old versions of Android that pre-date screen-size independence.

7.1.6. Ekran Teknolojisi

The Android platform includes APIs that allow applications to render rich graphics to the display. Devices MUST support all of these APIs as defined by the Android SDK unless specifically allowed in this document.

Cihaz uygulamaları:

  • [C-0-1] MUST support displays capable of rendering 16-bit color graphics.
  • SHOULD support displays capable of 24-bit color graphics.
  • [C-0-2] MUST support displays capable of rendering animations.
  • [C-0-3] MUST use the display technology that have a pixel aspect ratio (PAR) between 0.9 and 1.15. That is, the pixel aspect ratio MUST be near square (1.0) with a 10 ~ 15% tolerance.

7.1.7. Secondary Displays

Android includes support for secondary display to enable media sharing capabilities and developer APIs for accessing external displays.

If device implementations support an external display either via a wired, wireless, or an embedded additional display connection, they:

  • [C-1-1] MUST implement the DisplayManager system service and API as described in the Android SDK documentation.

7.2. Giriş cihazları

Cihaz uygulamaları:

7.2.1. Tuş takımı

If device implementations include support for third-party Input Method Editor (IME) applications, they:

Device implementations: * [C-0-1] MUST NOT include a hardware keyboard that does not match one of the formats specified in android.content.res.Configuration.keyboard (QWERTY or 12-key). * SHOULD include additional soft keyboard implementations. * MAY include a hardware keyboard.

7.2.2. Dokunmatik Olmayan Navigasyon

Android includes support for d-pad, trackball, and wheel as mechanisms for non-touch navigation.

Cihaz uygulamaları:

If device implementations lack non-touch navigations, they:

  • [C-1-1] MUST provide a reasonable alternative user interface mechanism for the selection and editing of text, compatible with Input Management Engines. The upstream Android open source implementation includes a selection mechanism suitable for use with devices that lack non-touch navigation inputs.

7.2.3. Gezinme Tuşları

The Home , Recents , and Back functions typically provided via an interaction with a dedicated physical button or a distinct portion of the touch screen, are essential to the Android navigation paradigm and therefore, device implementations:

  • [C-0-1] MUST provide a user affordance to launch installed applications that have an activity with the <intent-filter> set with ACTION=MAIN and CATEGORY=LAUNCHER or CATEGORY=LEANBACK_LAUNCHER for Television device implementations. The Home function SHOULD be the mechanism for this user affordance.
  • SHOULD provide buttons for the Recents and Back function.

If the Home, Recents, or Back functions are provided, they:

  • [C-1-1] MUST be accessible with a single action (eg tap, double-click or gesture) when any of them are accessible.
  • [C-1-2] MUST provide a clear indication of which single action would trigger each function. Having a visible icon imprinted on the button, showing a software icon on the navigation bar portion of the screen, or walking the user through a guided step-by-step demo flow during the out-of-box setup experience are examples of such an indication.

Cihaz uygulamaları:

  • [SR] are STRONGLY RECOMMENDED to not provide the input mechanism for the Menu function as it is deprecated in favor of action bar since Android 4.0.

If device implementations provide the Menu function, they:

  • [C-2-1] MUST display the action overflow button whenever the action overflow menu popup is not empty and the action bar is visible.
  • [C-2-2] MUST NOT modify the position of the action overflow popup displayed by selecting the overflow button in the action bar, but MAY render the action overflow popup at a modified position on the screen when it is displayed by selecting the Menu işlev.

If device implementations do not provide the Menu function, for backwards compatibility, they: * [C-3-1] MUST make the Menu function available to applications when targetSdkVersion is less than 10, either by a physical button, a software key, or mimik. This Menu function should be accessible unless hidden together with other navigation functions.

If device implementations provide the Assist function , they: * [C-4-1] MUST make the Assist function accessible with a single action (eg tap, double-click or gesture) when other navigation keys are accessible. * [SR] STRONGLY RECOMMENDED to use long press on HOME function as this designated interaction.

If device implementations use a distinct portion of the screen to display the navigation keys, they:

  • [C-5-1] Navigation keys MUST use a distinct portion of the screen, not available to applications, and MUST NOT obscure or otherwise interfere with the portion of the screen available to applications.
  • [C-5-2] MUST make available a portion of the display to applications that meets the requirements defined in section 7.1.1 .
  • [C-5-3] MUST honor the flags set by the app through the View.setSystemUiVisibility() API method, so that this distinct portion of the screen (aka the navigation bar) is properly hidden away as documented in the SDK.

7.2.4. Dokunmatik Ekran Girişi

Android includes support for a variety of pointer input systems, such as touchscreens, touch pads, and fake touch input devices. Touchscreen-based device implementations are associated with a display such that the user has the impression of directly manipulating items on screen. Since the user is directly touching the screen, the system does not require any additional affordances to indicate the objects being manipulated.

Cihaz uygulamaları:

  • SHOULD have a pointer input system of some kind (either mouse-like or touch).
  • SHOULD support fully independently tracked pointers.

If device implementations include a touchscreen (single-touch or better), they:

  • [C-1-1] MUST report TOUCHSCREEN_FINGER for the Configuration.touchscreen API field.
  • [C-1-2] MUST report the android.hardware.touchscreen and android.hardware.faketouch feature flags.

If device implementations include a touchscreen that can track more than a single touch, they:

  • [C-2-1] MUST report the appropriate feature flags android.hardware.touchscreen.multitouch , android.hardware.touchscreen.multitouch.distinct , android.hardware.touchscreen.multitouch.jazzhand corresponding to the type of the specific touchscreen on the cihaz.

If device implementations do not include a touchscreen (and rely on a pointer device only) and meet the fake touch requirements in section 7.2.5 , they:

  • [C-3-1] MUST NOT report any feature flag starting with android.hardware.touchscreen and MUST report only android.hardware.faketouch .

7.2.5. Sahte Dokunmatik Giriş

Fake touch interface provides a user input system that approximates a subset of touchscreen capabilities. For example, a mouse or remote control that drives an on-screen cursor approximates touch, but requires the user to first point or focus then click. Numerous input devices like the mouse, trackpad, gyro-based air mouse, gyro-pointer, joystick, and multi-touch trackpad can support fake touch interactions. Android includes the feature constant android.hardware.faketouch, which corresponds to a high-fidelity non-touch (pointer-based) input device such as a mouse or trackpad that can adequately emulate touch-based input (including basic gesture support), and indicates that the device supports an emulated subset of touchscreen functionality.

If device implementations do not include a touchscreen but include another pointer input system which they want to make available, they:

  • SHOULD declare support for the android.hardware.faketouch feature flag.

If device implementations declare support for android.hardware.faketouch , they:

  • [C-1-1] MUST report the absolute X and Y screen positions of the pointer location and display a visual pointer on the screen.
  • [C-1-2] MUST report touch event with the action code that specifies the state change that occurs on the pointer going down or up on the screen .
  • [C-1-3] MUST support pointer down and up on an object on the screen, which allows users to emulate tap on an object on the screen.
  • [C-1-4] MUST support pointer down, pointer up, pointer down then pointer up in the same place on an object on the screen within a time threshold, which allows users to emulate double tap on an object on the screen.
  • [C-1-5] MUST support pointer down on an arbitrary point on the screen, pointer move to any other arbitrary point on the screen, followed by a pointer up, which allows users to emulate a touch drag.
  • [C-1-6] MUST support pointer down then allow users to quickly move the object to a different position on the screen and then pointer up on the screen, which allows users to fling an object on the screen.
  • [C-1-7] MUST report TOUCHSCREEN_NOTOUCH for the Configuration.touchscreen API field.

If device implementations declare support for android.hardware.faketouch.multitouch.distinct , they:

  • [C-2-1] MUST declare support for android.hardware.faketouch .
  • [C-2-2] MUST support distinct tracking of two or more independent pointer inputs.

If device implementations declare support for android.hardware.faketouch.multitouch.jazzhand , they:

  • [C-3-1] MUST declare support for android.hardware.faketouch .
  • [C-3-2] MUST support distinct tracking of 5 (tracking a hand of fingers) or more pointer inputs fully independently.

7.2.6. Oyun Kumandası Desteği

7.2.6.1. Düğme Eşlemeleri

If device implementations declare the android.hardware.gamepad feature flag, they:

  • [C-1-1] MUST have embed a controller or ship with a separate controller in the box, that would provide means to input all the events listed in the below tables.
  • [C-1-2] MUST be capable to map HID events to it's associated Android view.InputEvent constants as listed in the below tables. The upstream Android implementation includes implementation for game controllers that satisfies this requirement.
Düğme HID Usage 2 Android Button
1 _ 0x09 0x0001 KEYCODE_BUTTON_A (96)
B 1 0x09 0x0002 KEYCODE_BUTTON_B (97)
X 1 0x09 0x0004 KEYCODE_BUTTON_X (99)
Y 1 0x09 0x0005 KEYCODE_BUTTON_Y (100)
D-pad up 1
D-pad down 1
0x01 0x0039 3 AXIS_HAT_Y 4
D-pad left 1
D-pad right 1
0x01 0x0039 3 AXIS_HAT_X 4
Left shoulder button 1 0x09 0x0007 KEYCODE_BUTTON_L1 (102)
Right shoulder button 1 0x09 0x0008 KEYCODE_BUTTON_R1 (103)
Left stick click 1 0x09 0x000E KEYCODE_BUTTON_THUMBL (106)
Right stick click 1 0x09 0x000F KEYCODE_BUTTON_THUMBR (107)
ev1 _ 0x0c 0x0223 KEYCODE_HOME (3)
Back 1 0x0c 0x0224 KEYCODE_BACK (4)

1 KeyEvent

2 The above HID usages must be declared within a Game pad CA (0x01 0x0005).

3 This usage must have a Logical Minimum of 0, a Logical Maximum of 7, a Physical Minimum of 0, a Physical Maximum of 315, Units in Degrees, and a Report Size of 4. The logical value is defined to be the clockwise rotation away from the vertical axis; for example, a logical value of 0 represents no rotation and the up button being pressed, while a logical value of 1 represents a rotation of 45 degrees and both the up and left keys being pressed.

4 MotionEvent

Analog Controls 1 HID Usage Android Button
Left Trigger 0x02 0x00C5 AXIS_LTRIGGER
Doğru tetik 0x02 0x00C4 AXIS_RTRIGGER
Left Joystick 0x01 0x0030
0x01 0x0031
AXIS_X
AXIS_Y
Right Joystick 0x01 0x0032
0x01 0x0035
AXIS_Z
AXIS_RZ

1 MotionEvent

7.2.7. Uzaktan kumanda

See Section 2.3.1 for device-specific requirements.

7.3. Sensörler

If device implementations include a particular sensor type that has a corresponding API for third-party developers, the device implementation MUST implement that API as described in the Android SDK documentation and the Android Open Source documentation on sensors .

Cihaz uygulamaları:

  • [C-0-1] MUST accurately report the presence or absence of sensors per the android.content.pm.PackageManager class.
  • [C-0-2] MUST return an accurate list of supported sensors via the SensorManager.getSensorList() and similar methods.
  • [C-0-3] MUST behave reasonably for all other sensor APIs (for example, by returning true or false as appropriate when applications attempt to register listeners, not calling sensor listeners when the corresponding sensors are not present; etc.).

If device implementations include a particular sensor type that has a corresponding API for third-party developers, they:

  • [C-1-1] MUST report all sensor measurements using the relevant International System of Units (metric) values for each sensor type as defined in the Android SDK documentation.
  • [C-1-2] MUST report sensor data with a maximum latency of 100 milliseconds + 2 * sample_time for the case of a sensor streamed with a minimum required latency of 5 ms + 2 * sample_time when the application processor is active. This delay does not include any filtering delays.
  • [C-1-3] MUST report the first sensor sample within 400 milliseconds + 2 * sample_time of the sensor being activated. It is acceptable for this sample to have an accuracy of 0.
  • [SR] SHOULD report the event time in nanoseconds as defined in the Android SDK documentation, representing the time the event happened and synchronized with the SystemClock.elapsedRealtimeNano() clock. Existing and new Android devices are STRONGLY RECOMMENDED to meet these requirements so they will be able to upgrade to the future platform releases where this might become a REQUIRED component. The synchronization error SHOULD be below 100 milliseconds.

  • [C-1-4] For any API indicated by the Android SDK documentation to be a continuous sensor , device implementations MUST continuously provide periodic data samples that SHOULD have a jitter below 3%, where jitter is defined as the standard deviation of the difference of the reported timestamp values between consecutive events.

  • [C-1-5] MUST ensure that the sensor event stream MUST NOT prevent the device CPU from entering a suspend state or waking up from a suspend state.

  • When several sensors are activated, the power consumption SHOULD NOT exceed the sum of the individual sensor's reported power consumption.

The list above is not comprehensive; the documented behavior of the Android SDK and the Android Open Source Documentations on sensors is to be considered authoritative.

Some sensor types are composite, meaning they can be derived from data provided by one or more other sensors. (Examples include the orientation sensor and the linear acceleration sensor.)

Cihaz uygulamaları:

  • SHOULD implement these sensor types, when they include the prerequisite physical sensors as described in sensor types .

If device implementations include a composite sensor, they:

  • [C-2-1] MUST implement the sensor as described in the Android Open Source documentation on composite sensors .

7.3.1. İvmeölçer

  • Device implementations SHOULD include a 3-axis accelerometer.

If device implementations include a 3-axis accelerometer, they:

  • [C-1-1] MUST be able to report events up to a frequency of at least 50 Hz.
  • [C-1-2] MUST implement and report TYPE_ACCELEROMETER sensor.
  • [C-1-3] MUST comply with the Android sensor coordinate system as detailed in the Android APIs.
  • [C-1-4] MUST be capable of measuring from freefall up to four times the gravity(4g) or more on any axis.
  • [C-1-5] MUST have a resolution of at least 12-bits.
  • [C-1-6] MUST have a standard deviation no greater than 0.05 m/s^, where the standard deviation should be calculated on a per axis basis on samples collected over a period of at least 3 seconds at the fastest sampling rate.
  • [SR] are STRONGLY RECOMMENDED to implement the TYPE_SIGNIFICANT_MOTION composite sensor.
  • [SR] are STRONGLY RECOMMENDED to implement the TYPE_ACCELEROMETER_UNCALIBRATED sensor if online accelerometer calibration is available.
  • SHOULD implement the TYPE_SIGNIFICANT_MOTION , TYPE_TILT_DETECTOR , TYPE_STEP_DETECTOR , TYPE_STEP_COUNTER composite sensors as described in the Android SDK document.
  • SHOULD report events up to at least 200 Hz.
  • SHOULD have a resolution of at least 16-bits.
  • SHOULD be calibrated while in use if the characteristics changes over the life cycle and compensated, and preserve the compensation parameters between device reboots.
  • SHOULD be temperature compensated.
  • SHOULD also implement TYPE_ACCELEROMETER_UNCALIBRATED sensor.

If device implementations include a 3-axis accelerometer and any of the TYPE_SIGNIFICANT_MOTION , TYPE_TILT_DETECTOR , TYPE_STEP_DETECTOR , TYPE_STEP_COUNTER composite sensors are implemented:

  • [C-2-1] The sum of their power consumption MUST always be less than 4 mW.
  • SHOULD each be below 2 mW and 0.5 mW for when the device is in a dynamic or static condition.

If device implementations include a 3-axis accelerometer and a gyroscope sensor, they:

  • [C-3-1] MUST implement the TYPE_GRAVITY and TYPE_LINEAR_ACCELERATION composite sensors.
  • SHOULD implement the TYPE_GAME_ROTATION_VECTOR composite sensor.
  • [SR] Existing and new Android devices are STRONGLY RECOMMENDED to implement the TYPE_GAME_ROTATION_VECTOR sensor.

If device implementations include a 3-axis accelerometer, a gyroscope sensor and a magnetometer sensor, they:

  • [C-4-1] MUST implement a TYPE_ROTATION_VECTOR composite sensor.

7.3.2. Manyetometre

  • Device implementations SHOULD include a 3-axis magnetometer (compass).

If device implementations include a 3-axis magnetometer, they:

  • [C-1-1] MUST implement the TYPE_MAGNETIC_FIELD sensor.
  • [C-1-2] MUST be able to report events up to a frequency of at least 10 Hz and SHOULD report events up to at least 50 Hz.
  • [C-1-3] MUST comply with the Android sensor coordinate system as detailed in the Android APIs.
  • [C-1-4] MUST be capable of measuring between -900 µT and +900 µT on each axis before saturating.
  • [C-1-5] MUST have a hard iron offset value less than 700 µT and SHOULD have a value below 200 µT, by placing the magnetometer far from dynamic (current-induced) and static (magnet-induced) magnetic fields.
  • [C-1-6] MUST have a resolution equal or denser than 0.6 µT.
  • [C-1-7] MUST support online calibration and compensation of the hard iron bias, and preserve the compensation parameters between device reboots.
  • [C-1-8] MUST have the soft iron compensation applied—the calibration can be done either while in use or during the production of the device.
  • [C-1-9] MUST have a standard deviation, calculated on a per axis basis on samples collected over a period of at least 3 seconds at the fastest sampling rate, no greater than 1.5 µT; SHOULD have a standard deviation no greater than 0.5 µT.
  • SHOULD implement TYPE_MAGNETIC_FIELD_UNCALIBRATED sensor.
  • [SR] Existing and new Android devices are STRONGLY RECOMMENDED to implement the TYPE_MAGNETIC_FIELD_UNCALIBRATED sensor.

If device implementations include a 3-axis magnetometer, an accelerometer sensor and a gyroscope sensor, they:

  • [C-2-1] MUST implement a TYPE_ROTATION_VECTOR composite sensor.

If device implementations include a 3-axis magnetometer, an accelerometer, they:

  • MAY implement the TYPE_GEOMAGNETIC_ROTATION_VECTOR sensor.

If device implementations include a 3-axis magnetometer, an accelerometer and TYPE_GEOMAGNETIC_ROTATION_VECTOR sensor, they:

  • [C-3-1] MUST consume less than 10 mW.
  • SHOULD consume less than 3 mW when the sensor is registered for batch mode at 10 Hz.

7.3.3. Küresel Konumlama Sistemi

Cihaz uygulamaları:

  • SHOULD include a GPS/GNSS receiver.

If device implementations include a GPS/GNSS receiver and report the capability to applications through the android.hardware.location.gps feature flag, they:

  • [C-1-1] MUST support location outputs at a rate of at least 1 Hz when requested via LocationManager#requestLocationUpdate .
  • [C-1-2] MUST be able to determine the location in open-sky conditions (strong signals, negligible multipath, HDOP < 2) within 10 seconds (fast time to first fix), when connected to a 0.5 Mbps or faster data speed internet connection. This requirement is typically met by the use of some form of Assisted or Predicted GPS/GNSS technique to minimize GPS/GNSS lock-on time (Assistance data includes Reference Time, Reference Location and Satellite Ephemeris/Clock).
    • [C-1-6] After making such a location calculation, device implementations MUST determine its location, in open sky, within 5 seconds, when location requests are restarted, up to an hour after the initial location calculation, even when the subsequent request is made without a data connection, and/or after a power cycle.
  • In open sky conditions after determining the location, while stationary or moving with less than 1 meter per second squared of acceleration:

    • [C-1-3] MUST be able to determine location within 20 meters, and speed within 0.5 meters per second, at least 95% of the time.
    • [C-1-4] MUST simultaneously track and report via GnssStatus.Callback at least 8 satellites from one constellation.
    • SHOULD be able to simultaneously track at least 24 satellites, from multiple constellations (eg GPS + at least one of Glonass, Beidou, Galileo).
    • [C-1-5] MUST report the GNSS technology generation through the test API 'getGnssYearOfHardware'.
    • [SR] Continue to deliver normal GPS/GNSS location outputs during an emergency phone call.
    • [SR] Report GNSS measurements from all constellations tracked (as reported in GnssStatus messages), with the exception of SBAS.
    • [SR] Report AGC, and Frequency of GNSS measurement.
    • [SR] Report all accuracy estimates (including Bearing, Speed, and Vertical) as part of each GPS/GNSS location.
    • [SR] are STRONGLY RECOMMENDED to meet as many as possible from the additional mandatory requirements for devices reporting the year "2016" or "2017" through the Test API LocationManager.getGnssYearOfHardware() .

If device implementations include a GPS/GNSS receiver and report the capability to applications through the android.hardware.location.gps feature flag and the LocationManager.getGnssYearOfHardware() Test API reports the year "2016" or newer, they:

  • [C-2-1] MUST report GNSS measurements, as soon as they are found, even if a location calculated from GPS/GNSS is not yet reported.
  • [C-2-2] MUST report GNSS pseudoranges and pseudorange rates, that, in open-sky conditions after determining the location, while stationary or moving with less than 0.2 meter per second squared of acceleration, are sufficient to calculate position within 20 meters, and speed within 0.2 meters per second, at least 95% of the time.

If device implementations include a GPS/GNSS receiver and report the capability to applications through the android.hardware.location.gps feature flag and the LocationManager.getGnssYearOfHardware() Test API reports the year "2017" or newer, they:

  • [C-3-1] MUST continue to deliver normal GPS/GNSS location outputs during an emergency phone call.
  • [C-3-2] MUST report GNSS measurements from all constellations tracked (as reported in GnssStatus messages), with the exception of SBAS.
  • [C-3-3] MUST report AGC, and Frequency of GNSS measurement.
  • [C-3-4] MUST report all accuracy estimates (including Bearing, Speed, and Vertical) as part of each GPS/GNSS location.

If device implementations include a GPS/GNSS receiver and report the capability to applications through the android.hardware.location.gps feature flag and the LocationManager.getGnssYearOfHardware() Test API reports the year "2018" or newer, they:

  • [C-4-1] MUST continue to deliver normal GPS/GNSS outputs to applications during a Mobile Station Based (MS-Based) Network Initiated emergency session call.
  • [C-4-2] MUST report positions and measurements to the GNSS Location Provider API's.

7.3.4. Jiroskop

Cihaz uygulamaları:

  • SHOULD include a gyroscope (angular change sensor).
  • SHOULD NOT include a gyroscope sensor unless a 3-axis accelerometer is also included.

If device implementations include a gyroscope, they:

  • [C-1-1] MUST be able to report events up to a frequency of at least 50 Hz.
  • [C-1-2] MUST implement the TYPE_GYROSCOPE sensor and SHOULD also implement TYPE_GYROSCOPE_UNCALIBRATED sensor.
  • [C-1-3] MUST be capable of measuring orientation changes up to 1,000 degrees per second.
  • [C-1-4] MUST have a resolution of 12-bits or more and SHOULD have a resolution of 16-bits or more.
  • [C-1-5] MUST be temperature compensated.
  • [C-1-6] MUST be calibrated and compensated while in use, and preserve the compensation parameters between device reboots.
  • [C-1-7] MUST have a variance no greater than 1e-7 rad^2 / s^2 per Hz (variance per Hz, or rad^2 / s). The variance is allowed to vary with the sampling rate, but MUST be constrained by this value. In other words, if you measure the variance of the gyro at 1 Hz sampling rate it SHOULD be no greater than 1e-7 rad^2/s^2.
  • [SR] Existing and new Android devices are STRONGLY RECOMMENDED to implement the SENSOR_TYPE_GYROSCOPE_UNCALIBRATED sensor.
  • [SR] Calibration error is STRONGLY RECOMMENDED to be less than 0.01 rad/s when device is stationary at room temperature.
  • SHOULD report events up to at least 200 Hz.

If device implementations include a gyroscope, an accelerometer sensor and a magnetometer sensor, they:

  • [C-2-1] MUST implement a TYPE_ROTATION_VECTOR composite sensor.

If device implementations include a gyroscope and a accelerometer sensor, they:

  • [C-3-1] MUST implement the TYPE_GRAVITY and TYPE_LINEAR_ACCELERATION composite sensors.
  • [SR] Existing and new Android devices are STRONGLY RECOMMENDED to implement the TYPE_GAME_ROTATION_VECTOR sensor.
  • SHOULD implement the TYPE_GAME_ROTATION_VECTOR composite sensor.

7.3.5. Barometre

  • Device implementations SHOULD include a barometer (ambient air pressure sensor).

If device implementations include a barometer, they:

  • [C-1-1] MUST implement and report TYPE_PRESSURE sensor.
  • [C-1-2] MUST be able to deliver events at 5 Hz or greater.
  • [C-1-3] MUST be temperature compensated.
  • [SR] STRONGLY RECOMMENDED to be able to report pressure measurements in the range 300hPa to 1100hPa.
  • SHOULD have an absolute accuracy of 1hPa.
  • SHOULD have a relative accuracy of 0.12hPa over 20hPa range (equivalent to ~1m accuracy over ~200m change at sea level).

7.3.6. Termometre

Device implementations: * MAY include an ambient thermometer (temperature sensor). * MAY but SHOULD NOT include a CPU temperature sensor.

If device implementations include an ambient thermometer (temperature sensor), they:

  • [C-1-1] MUST be defined as SENSOR_TYPE_AMBIENT_TEMPERATURE and MUST measure the ambient (room/vehicle cabin) temperature from where the user is interacting with the device in degrees Celsius.
  • [C-1-2] MUST be defined as SENSOR_TYPE_TEMPERATURE .
  • [C-1-3] MUST measure the temperature of the device CPU.
  • [C-1-4] MUST NOT measure any other temperature.

Note the SENSOR_TYPE_TEMPERATURE sensor type was deprecated in Android 4.0.

7.3.7. Fotometre

  • Device implementations MAY include a photometer (ambient light sensor).

7.3.8. Yakınlık sensörü

  • Device implementations MAY include a proximity sensor.

If device implementations include a proximity sensor, they:

  • [C-1-1] MUST measure the proximity of an object in the same direction as the screen. That is, the proximity sensor MUST be oriented to detect objects close to the screen, as the primary intent of this sensor type is to detect a phone in use by the user. If device implementations include a proximity sensor with any other orientation, it MUST NOT be accessible through this API.
  • [C-1-2] MUST have 1-bit of accuracy or more.

7.3.9. High Fidelity Sensors

If device implementations include a set of higher quality sensors as defined in this section, and make available them to third-party apps, they:

  • [C-1-1] MUST identify the capability through the android.hardware.sensor.hifi_sensors feature flag.

If device implementations declare android.hardware.sensor.hifi_sensors , they:

  • [C-2-1] MUST have a TYPE_ACCELEROMETER sensor which:

    • MUST have a measurement range between at least -8g and +8g, SHOULD have a measurement range between at least -16g and +16g.
    • MUST have a measurement resolution of at least 2048 LSB/g.
    • MUST have a minimum measurement frequency of 12.5 Hz or lower.
    • MUST have a maximum measurement frequency of 400 Hz or higher; SHOULD support the SensorDirectChannel RATE_VERY_FAST .
    • MUST have a measurement noise not above 400 μg/√Hz.
    • MUST implement a non-wake-up form of this sensor with a buffering capability of at least 3000 sensor events.
    • MUST have a batching power consumption not worse than 3 mW.
    • [C-SR] Is STRONGLY RECOMMENDED to have 3dB measurement bandwidth of at least 80% of Nyquist frequency, and white noise spectrum within this bandwidth.
    • SHOULD have an acceleration random walk less than 30 μg √Hz tested at room temperature.
    • SHOULD have a bias change vs. temperature of ≤ +/- 1 mg/°C.
    • SHOULD have a best-fit line non-linearity of ≤ 0.5%, and sensitivity change vs. temperature of ≤ 0.03%/C°.
    • SHOULD have cross-axis sensitivity of < 2.5 % and variation of cross-axis sensitivity < 0.2% in device operation temperature range.
  • [C-2-2] MUST have a TYPE_ACCELEROMETER_UNCALIBRATED with the same quality requirements as TYPE_ACCELEROMETER .

  • [C-2-3] MUST have a TYPE_GYROSCOPE sensor which:

    • MUST have a measurement range between at least -1000 and +1000 dps.
    • MUST have a measurement resolution of at least 16 LSB/dps.
    • MUST have a minimum measurement frequency of 12.5 Hz or lower.
    • MUST have a maximum measurement frequency of 400 Hz or higher; SHOULD support the SensorDirectChannel RATE_VERY_FAST .
    • MUST have a measurement noise not above 0.014°/s/√Hz.
    • [C-SR] Is STRONGLY RECOMMENDED to have 3dB measurement bandwidth of at least 80% of Nyquist frequency, and white noise spectrum within this bandwidth.
    • SHOULD have a rate random walk less than 0.001 °/s √Hz tested at room temperature.
    • SHOULD have a bias change vs. temperature of ≤ +/- 0.05 °/ s / °C.
    • SHOULD have a sensitivity change vs. temperature of ≤ 0.02% / °C.
    • SHOULD have a best-fit line non-linearity of ≤ 0.2%.
    • SHOULD have a noise density of ≤ 0.007 °/s/√Hz.
    • SHOULD have calibration error less than 0.002 rad/s in temperature range 10 ~ 40 ℃ when device is stationary.
    • SHOULD have g-sensitivity less than 0.1°/s/g.
    • SHOULD have cross-axis sensitivity of < 4.0 % and cross-axis sensitivity variation < 0.3% in device operation temperature range.
  • [C-2-4] MUST have a TYPE_GYROSCOPE_UNCALIBRATED with the same quality requirements as TYPE_GYROSCOPE .

  • [C-2-5] MUST have a TYPE_GEOMAGNETIC_FIELD sensor which:

    • MUST have a measurement range between at least -900 and +900 μT.
    • MUST have a measurement resolution of at least 5 LSB/uT.
    • MUST have a minimum measurement frequency of 5 Hz or lower.
    • MUST have a maximum measurement frequency of 50 Hz or higher.
    • MUST have a measurement noise not above 0.5 uT.
  • [C-2-6] MUST have a TYPE_MAGNETIC_FIELD_UNCALIBRATED with the same quality requirements as TYPE_GEOMAGNETIC_FIELD and in addition:

    • MUST implement a non-wake-up form of this sensor with a buffering capability of at least 600 sensor events.
    • [C-SR] Is STRONGLY RECOMMENDED to have white noise spectrum from 1 Hz to at least 10 Hz when the report rate is 50 Hz or higher.
  • [C-2-7] MUST have a TYPE_PRESSURE sensor which:

    • MUST have a measurement range between at least 300 and 1100 hPa.
    • MUST have a measurement resolution of at least 80 LSB/hPa.
    • MUST have a minimum measurement frequency of 1 Hz or lower.
    • MUST have a maximum measurement frequency of 10 Hz or higher.
    • MUST have a measurement noise not above 2 Pa/√Hz.
    • MUST implement a non-wake-up form of this sensor with a buffering capability of at least 300 sensor events.
    • MUST have a batching power consumption not worse than 2 mW.
  • [C-2-8] MUST have a TYPE_GAME_ROTATION_VECTOR sensor which:
    • MUST implement a non-wake-up form of this sensor with a buffering capability of at least 300 sensor events.
    • MUST have a batching power consumption not worse than 4 mW.
  • [C-2-9] MUST have a TYPE_SIGNIFICANT_MOTION sensor which:
    • MUST have a power consumption not worse than 0.5 mW when device is static and 1.5 mW when device is moving.
  • [C-2-10] MUST have a TYPE_STEP_DETECTOR sensor which:
    • MUST implement a non-wake-up form of this sensor with a buffering capability of at least 100 sensor events.
    • MUST have a power consumption not worse than 0.5 mW when device is static and 1.5 mW when device is moving.
    • MUST have a batching power consumption not worse than 4 mW.
  • [C-2-11] MUST have a TYPE_STEP_COUNTER sensor which:
    • MUST have a power consumption not worse than 0.5 mW when device is static and 1.5 mW when device is moving.
  • [C-2-12] MUST have a TILT_DETECTOR sensor which:
    • MUST have a power consumption not worse than 0.5 mW when device is static and 1.5 mW when device is moving.
  • [C-2-13] The event timestamp of the same physical event reported by the Accelerometer, Gyroscope, and Magnetometer MUST be within 2.5 milliseconds of each other. The event timestamp of the same physical event reported by the Accelerometer and Gyroscope SHOULD be within 0.25 milliseconds of each other.
  • [C-2-14] MUST have Gyroscope sensor event timestamps on the same time base as the camera subsystem and within 1 milliseconds of error.
  • [C-2-15] MUST deliver samples to applications within 5 milliseconds from the time when the data is available on any of the above physical sensors to the application.
  • [C-2-16] MUST NOT have a power consumption higher than 0.5 mW when device is static and 2.0 mW when device is moving when any combination of the following sensors are enabled:
    • SENSOR_TYPE_SIGNIFICANT_MOTION
    • SENSOR_TYPE_STEP_DETECTOR
    • SENSOR_TYPE_STEP_COUNTER
    • SENSOR_TILT_DETECTORS
  • [C-2-17] MAY have a TYPE_PROXIMITY sensor, but if present MUST have a minimum buffer capability of 100 sensor events.

Note that all power consumption requirements in this section do not include the power consumption of the Application Processor. It is inclusive of the power drawn by the entire sensor chain—the sensor, any supporting circuitry, any dedicated sensor processing system, etc.

If device implementations include direct sensor support, they:

  • [C-3-1] MUST correctly declare support of direct channel types and direct report rates level through the isDirectChannelTypeSupported and getHighestDirectReportRateLevel API.
  • [C-3-2] MUST support at least one of the two sensor direct channel types for all sensors that declare support for sensor direct channel.
  • SHOULD support event reporting through sensor direct channel for primary sensor (non-wakeup variant) of the following types:
    • TYPE_ACCELEROMETER
    • TYPE_ACCELEROMETER_UNCALIBRATED
    • TYPE_GYROSCOPE
    • TYPE_GYROSCOPE_UNCALIBRATED
    • TYPE_MAGNETIC_FIELD
    • TYPE_MAGNETIC_FIELD_UNCALIBRATED

7.3.10. Biyometrik Sensörler

7.3.10.1. Fingerprint Sensors

If device implementations include a secure lock screen, they:

  • SHOULD include a fingerprint sensor.

If device implementations include a fingerprint sensor and make the sensor available to third-party apps, they:

  • [C-1-1] MUST declare support for the android.hardware.fingerprint feature.
  • [C-1-2] MUST fully implement the corresponding API as described in the Android SDK documentation.
  • [C-1-3] MUST have a false acceptance rate not higher than 0.002%.
  • [SR] Are STRONGLY RECOMMENDED to have a spoof and imposter acceptance rate not higher than 7%.
  • [C-1-4] MUST disclose that this mode may be less secure than a strong PIN, pattern, or password and clearly enumerate the risks of enabling it, if the spoof and imposter acceptance rates are higher than 7%.
  • [C-1-5] MUST rate limit attempts for at least 30 seconds after five false trials for fingerprint verification.
  • [C-1-6] MUST have a hardware-backed keystore implementation, and perform the fingerprint matching in a Trusted Execution Environment (TEE) or on a chip with a secure channel to the TEE.
  • [C-1-7] MUST have all identifiable fingerprint data encrypted and cryptographically authenticated such that they cannot be acquired, read or altered outside of the TEE, or a chip with a secure channel to the TEE as documented in the implementation guidelines on the Android Open Source Project site.
  • [C-1-8] MUST prevent adding a fingerprint without first establishing a chain of trust by having the user confirm existing or add a new device credential (PIN/pattern/password) that's secured by TEE; the Android Open Source Project implementation provides the mechanism in the framework to do so.
  • [C-1-9] MUST NOT enable 3rd-party applications to distinguish between individual fingerprints.
  • [C-1-10] MUST honor the DevicePolicyManager.KEYGUARD_DISABLE_FINGERPRINT flag.
  • [C-1-11] MUST, when upgraded from a version earlier than Android 6.0, have the fingerprint data securely migrated to meet the above requirements or removed.
  • [C-1-12] MUST completely remove all identifiable fingerprint data for a user when the user's account is removed (including via a factory reset).
  • [C-1-13] MUST not allow unencrypted access to identifiable fingerprint data or any data derived from it (such as embeddings) to the Application Processor.
  • [SR] Are STRONGLY RECOMMENDED to have a false rejection rate of less than 10%, as measured on the device.
  • [SR] Are STRONGLY RECOMMENDED to have a latency below 1 second, measured from when the fingerprint sensor is touched until the screen is unlocked, for one enrolled finger.
  • SHOULD use the Android Fingerprint icon provided in the Android Open Source Project.
7.3.10.2. Other Biometric Sensors

If device implementations include one or more non-fingerprint-based-biometric sensors and make them available to third-party apps they:

  • [C-1-1] MUST have a false acceptance rate not higher than 0.002%.
  • [C-SR] Are STRONGLY RECOMMENDED to have a spoof and imposter acceptance rate not higher than 7%.
  • [C-1-2] MUST disclose that this mode may be less secure than a strong PIN, pattern, or password and clearly enumerate the risks of enabling it, if the spoof and imposter acceptance rates are higher than 7%.
  • [C-1-3] MUST rate limit attempts for at least 30 seconds after five false trials for biometric verification - where a false trial is one with an adequate capture quality (ACQUIRED_GOOD) that does not match an enrolled biometric
  • [C-1-4] MUST have a hardware-backed keystore implementation, and perform the biometric matching in a TEE or on a chip with a secure channel to the TEE.
  • [C-1-5] MUST have all identifiable data encrypted and cryptographically authenticated such that they cannot be acquired, read or altered outside of the TEE, or a chip with a secure channel to the TEE as documented in the implementation guidelines on the Android Open Source Project site.
  • [C-1-6] MUST prevent adding new biometrics without first establishing a chain of trust by having the user confirm existing or add a new device credential (PIN/pattern/password) that's secured by TEE; the Android Open Source Project implementation provides the mechanism in the framework to do so.
  • [C-1-7] MUST NOT enable third-party applications to distinguish between biometric enrollments.
  • [C-1-8] MUST honor the individual flag for that biometric (ie: DevicePolicyManager.KEYGUARD_DISABLE_FINGERPRINT , DevicePolicymanager.KEYGUARD_DISABLE_FACE , or DevicePolicymanager.KEYGUARD_DISABLE_IRIS ).
  • [C-1-9] MUST completely remove all identifiable biometric data for a user when the user's account is removed (including via a factory reset).
  • [C-1-10] MUST not allow unencrypted access to identifiable biometric data or any data derived from it (such as embeddings) to the Application Processor outside the context of the TEE.
  • [C-SR] Are STRONGLY RECOMMENDED to have a false rejection rate of less than 10%, as measured on the device.
  • [C-SR] Are STRONGLY RECOMMENDED to have a latency below 1 second, measured from when the biometric is detected, until the screen is unlocked, for each enrolled biometric.

7.3.11. Android Automotive-only sensors

Automotive-specific sensors are defined in the android.car.CarSensorManager API .

7.3.11.1. Current Gear

See Section 2.5.1 for device-specific requirements.

7.3.11.2. Day Night Mode

See Section 2.5.1 for device-specific requirements.

7.3.11.3. Driving Status

This requirement is deprecated.

7.3.11.4. Wheel Speed

See Section 2.5.1 for device-specific requirements.

7.3.11.5. El freni

See Section 2.5.1 for device-specific requirements.

7.3.12. Pose Sensor

Cihaz uygulamaları:

  • MAY support pose sensor with 6 degrees of freedom.

If device implementations support pose sensor with 6 degrees of freedom, they:

  • [C-1-1] MUST implement and report TYPE_POSE_6DOF sensor.
  • [C-1-2] MUST be more accurate than the rotation vector alone.

7.4. Veri Bağlantısı

7.4.1. Telefon

“Telephony” as used by the Android APIs and this document refers specifically to hardware related to placing voice calls and sending SMS messages via a GSM or CDMA network. While these voice calls may or may not be packet-switched, they are for the purposes of Android considered independent of any data connectivity that may be implemented using the same network. In other words, the Android “telephony” functionality and APIs refer specifically to voice calls and SMS. For instance, device implementations that cannot place calls or send/receive SMS messages are not considered a telephony device, regardless of whether they use a cellular network for data connectivity.

  • Android MAY be used on devices that do not include telephony hardware. That is, Android is compatible with devices that are not phones.

If device implementations include GSM or CDMA telephony, they:

  • [C-1-1] MUST declare the android.hardware.telephony feature flag and other sub-feature flags according to the technology.
  • [C-1-2] MUST implement full support for the API for that technology.

If device implementations do not include telephony hardware, they:

  • [C-2-1] MUST implement the full APIs as no-ops.
7.4.1.1. Number Blocking Compatibility

If device implementations report the android.hardware.telephony feature , they:

  • [C-1-1] MUST include number blocking support
  • [C-1-2] MUST fully implement BlockedNumberContract and the corresponding API as described in the SDK documentation.
  • [C-1-3] MUST block all calls and messages from a phone number in 'BlockedNumberProvider' without any interaction with apps. The only exception is when number blocking is temporarily lifted as described in the SDK documentation.
  • [C-1-4] MUST NOT write to the platform call log provider for a blocked call.
  • [C-1-5] MUST NOT write to the Telephony provider for a blocked message.
  • [C-1-6] MUST implement a blocked numbers management UI, which is opened with the intent returned by TelecomManager.createManageBlockedNumbersIntent() method.
  • [C-1-7] MUST NOT allow secondary users to view or edit the blocked numbers on the device as the Android platform assumes the primary user to have full control of the telephony services, a single instance, on the device. All blocking related UI MUST be hidden for secondary users and the blocked list MUST still be respected.
  • SHOULD migrate the blocked numbers into the provider when a device updates to Android 7.0.
7.4.1.2. Telecom API

Cihaz uygulamaları android.hardware.telephony rapor ederse,:

  • [C-1-1] MUST support the ConnectionService APIs described in the SDK .
  • [C-1-2] MUST display a new incoming call and provide user affordance to accept or reject the incoming call when the user is on an ongoing call that is made by a third-party app that does not support the hold feature specified via CAPABILITY_SUPPORT_HOLD .
  • [C-SR] Are STRONGLY RECOMMENDED to notify the user that answering an incoming call will drop an ongoing call.

    The AOSP implementation meets these requirements by a heads-up notification which indicates to the user that answering an incoming call will cause the other call to be dropped.

  • [C-SR] Are STRONGLY RECOMMENDED to preload the default dialer app that shows a call log entry and the name of a third-party app in its call log when the third-party app sets the EXTRA_LOG_SELF_MANAGED_CALLS extras key on its PhoneAccount to true .

  • [C-SR] Are STRONGLY RECOMMENDED to handle the audio headset's KEYCODE_MEDIA_PLAY_PAUSE and KEYCODE_HEADSETHOOK events for the android.telecom APIs as below:

7.4.2. IEEE 802.11 (Kablosuz)

Cihaz uygulamaları:

  • SHOULD include support for one or more forms of 802.11.

If device implementations include support for 802.11 and expose the functionality to a third-party application, they:

  • [C-1-1] MUST implement the corresponding Android API.
  • [C-1-2] MUST report the hardware feature flag android.hardware.wifi .
  • [C-1-3] MUST implement the multicast API as described in the SDK documentation.
  • [C-1-4] MUST support multicast DNS (mDNS) and MUST NOT filter mDNS packets (224.0.0.251) at any time of operation including:
    • Even when the screen is not in an active state.
    • For Android Television device implementations, even when in standby power states.
  • [C-1-5] MUST NOT treat the WifiManager.enableNetwork() API method call as a sufficient indication to switch the currently active Network that is used by default for application traffic and is returned by ConnectivityManager API methods such as getActiveNetwork and registerDefaultNetworkCallback . In other words, they MAY only disable the Internet access provided by any other network provider (eg mobile data) if they successfully validate that the Wi-Fi network is providing Internet access.
  • [C-SR] Are STRONGLY RECOMMENDED, when the ConnectivityManager.reportNetworkConnectivity() API method is called, to re-evaluate the Internet access on the Network and, once the evaluation determines that the current Network no longer provides Internet access, switch to any other available network (eg mobile data) that provides Internet access.
  • [C-SR] Are STRONGLY RECOMMENDED to randomize the source MAC address and sequence number of probe request frames, once at the beginning of each scan, while STA is disconnected.
    • Each group of probe request frames comprising one scan should use one consistent MAC address (SHOULD NOT randomize MAC address halfway through a scan).
    • Probe request sequence number should iterate as normal (sequentially) between the probe requests in a scan.
    • Probe request sequence number should randomize between the last probe request of a scan and the first probe request of the next scan.
  • [C-SR] Are STRONGLY RECOMMENDED, while STA is disconnected, to allow only the following elements in probe request frames:
    • SSID Parameter Set (0)
    • DS Parameter Set (3)

If device implementations support Wi-Fi and use Wi-Fi for location scanning, they:

7.4.2.1. Doğrudan kablosuz bağlantı

Cihaz uygulamaları:

  • SHOULD include support for Wi-Fi Direct (Wi-Fi peer-to-peer).

If device implementations include support for Wi-Fi Direct, they:

  • [C-1-1] MUST implement the corresponding Android API as described in the SDK documentation.
  • [C-1-2] MUST report the hardware feature android.hardware.wifi.direct .
  • [C-1-3] MUST support regular Wi-Fi operation.
  • [C-1-4] MUST support Wi-Fi and Wi-Fi Direct operations concurrently.

Cihaz uygulamaları:

If device implementations include support for TDLS and TDLS is enabled by the WiFiManager API, they:

  • [C-1-1] MUST declare support for TDLS through WifiManager.isTdlsSupported .
  • SHOULD use TDLS only when it is possible AND beneficial.
  • SHOULD have some heuristic and NOT use TDLS when its performance might be worse than going through the Wi-Fi access point.
7.4.2.3. Wi-Fi Aware

Cihaz uygulamaları:

If device implementations include support for Wi-Fi Aware and expose the functionality to third-party apps, then they:

  • [C-1-1] MUST implement the WifiAwareManager APIs as described in the SDK documentation .
  • [C-1-2] MUST declare the android.hardware.wifi.aware feature flag.
  • [C-1-3] MUST support Wi-Fi and Wi-Fi Aware operations concurrently.
  • [C-1-4] MUST randomize the Wi-Fi Aware management interface address at intervals no longer than 30 minutes and whenever Wi-Fi Aware is enabled.

If device implementations include support for Wi-Fi Aware and Wi-Fi Location as described in Section 7.4.2.5 and exposes these functionalities to third-party apps, then they:

7.4.2.4. Wi-Fi Passpoint

Cihaz uygulamaları:

If device implementations include support for Wi-Fi Passpoint, they:

  • [C-1-1] MUST implement the Passpoint related WifiManager APIs as described in the SDK documentation .
  • [C-1-2] MUST support IEEE 802.11u standard, specifically related to Network Discovery and Selection, such as Generic Advertisement Service (GAS) and Access Network Query Protocol (ANQP).

Conversely if device implementations do not include support for Wi-Fi Passpoint:

  • [C-2-1] The implementation of the Passpoint related WifiManager APIs MUST throw an UnsupportedOperationException .
7.4.2.5. Wi-Fi Location (Wi-Fi Round Trip Time - RTT)

Cihaz uygulamaları:

If device implementations include support for Wi-Fi Location and expose the functionality to third-party apps, then they:

  • [C-1-1] MUST implement the WifiRttManager APIs as described in the SDK documentation .
  • [C-1-2] MUST declare the android.hardware.wifi.rtt feature flag.
  • [C-1-3] MUST randomize the source MAC address for each RTT burst which is executed while the Wi-Fi interface on which the RTT is being executed is not associated to an Access Point.

7.4.3. Bluetooth

If device implementations support Bluetooth Audio profile, they:

  • SHOULD support Advanced Audio Codecs and Bluetooth Audio Codecs (eg LDAC).

If device implementations support HFP, A2DP and AVRCP, they:

  • SHOULD support at least 5 total connected devices.

If device implementations declare android.hardware.vr.high_performance feature, they:

  • [C-1-1] MUST support Bluetooth 4.2 and Bluetooth LE Data Length Extension.

Android includes support for Bluetooth and Bluetooth Low Energy .

If device implementations include support for Bluetooth and Bluetooth Low Energy, they:

  • [C-2-1] MUST declare the relevant platform features ( android.hardware.bluetooth and android.hardware.bluetooth_le respectively) and implement the platform APIs.
  • SHOULD implement relevant Bluetooth profiles such as A2DP, AVRCP, OBEX, HFP, etc. as appropriate for the device.

If device implementations include support for Bluetooth Low Energy, they:

  • [C-3-1] MUST declare the hardware feature android.hardware.bluetooth_le .
  • [C-3-2] MUST enable the GATT (generic attribute profile) based Bluetooth APIs as described in the SDK documentation and android.bluetooth .
  • [C-3-3] MUST report the correct value for BluetoothAdapter.isOffloadedFilteringSupported() to indicate whether the filtering logic for the ScanFilter API classes is implemented.
  • [C-3-4] MUST report the correct value for BluetoothAdapter.isMultipleAdvertisementSupported() to indicate whether Low Energy Advertising is supported.
  • SHOULD support offloading of the filtering logic to the bluetooth chipset when implementing the ScanFilter API .
  • SHOULD support offloading of the batched scanning to the bluetooth chipset.
  • SHOULD support multi advertisement with at least 4 slots.

  • [SR] STRONGLY RECOMMENDED to implement a Resolvable Private Address (RPA) timeout no longer than 15 minutes and rotate the address at timeout to protect user privacy.

If device implementations support Bluetooth LE and use Bluetooth LE for location scanning, they:

  • [C-4-1] MUST provide a user affordance to enable/disable the value read through the System API BluetoothAdapter.isBleScanAlwaysAvailable() .

7.4.4. Yakın Alan İletişimi

Cihaz uygulamaları:

  • SHOULD include a transceiver and related hardware for Near-Field Communications (NFC).
  • [C-0-1] MUST implement android.nfc.NdefMessage and android.nfc.NdefRecord APIs even if they do not include support for NFC or declare the android.hardware.nfc feature as the classes represent a protocol-independent data representation format .

If device implementations include NFC hardware and plan to make it available to third-party apps, they:

  • [C-1-1] MUST report the android.hardware.nfc feature from the android.content.pm.PackageManager.hasSystemFeature() method .
  • MUST be capable of reading and writing NDEF messages via the following NFC standards as below:
  • [C-1-2] MUST be capable of acting as an NFC Forum reader/writer (as defined by the NFC Forum technical specification NFCForum-TS-DigitalProtocol-1.0) via the following NFC standards:
    • NfcA (ISO14443-3A)
    • NfcB (ISO14443-3B)
    • NfcF (JIS X 6319-4)
    • IsoDep (ISO 14443-4)
    • NFC Forum Tag Types 1, 2, 3, 4, 5 (defined by the NFC Forum)
  • [SR] STRONGLY RECOMMENDED to be capable of reading and writing NDEF messages as well as raw data via the following NFC standards. Note that while the NFC standards are stated as STRONGLY RECOMMENDED, the Compatibility Definition for a future version is planned to change these to MUST. These standards are optional in this version but will be required in future versions. Existing and new devices that run this version of Android are very strongly encouraged to meet these requirements now so they will be able to upgrade to the future platform releases.

  • [C-1-3] MUST be capable of transmitting and receiving data via the following peer-to-peer standards and protocols:

    • ISO 18092
    • LLCP 1.2 (defined by the NFC Forum)
    • SDP 1.0 (defined by the NFC Forum)
    • NDEF Push Protocol
    • SNEP 1.0 (defined by the NFC Forum)
  • [C-1-4] MUST include support for Android Beam and SHOULD enable Android Beam by default.
  • [C-1-5] MUST be able to send and receive using Android Beam, when Android Beam is enabled or another proprietary NFC P2p mode is turned on.
  • [C-1-6] MUST implement the SNEP default server. Valid NDEF messages received by the default SNEP server MUST be dispatched to applications using the android.nfc.ACTION_NDEF_DISCOVERED intent. Disabling Android Beam in settings MUST NOT disable dispatch of incoming NDEF message.
  • [C-1-7] MUST honor the android.settings.NFCSHARING_SETTINGS intent to show NFC sharing settings .
  • [C-1-8] MUST implement the NPP server. Messages received by the NPP server MUST be processed the same way as the SNEP default server.
  • [C-1-9] MUST implement a SNEP client and attempt to send outbound P2P NDEF to the default SNEP server when Android Beam is enabled. If no default SNEP server is found then the client MUST attempt to send to an NPP server.
  • [C-1-10] MUST allow foreground activities to set the outbound P2P NDEF message using android.nfc.NfcAdapter.setNdefPushMessage , and android.nfc.NfcAdapter.setNdefPushMessageCallback , and android.nfc.NfcAdapter.enableForegroundNdefPush .
  • SHOULD use a gesture or on-screen confirmation, such as 'Touch to Beam', before sending outbound P2P NDEF messages.
  • [C-1-11] MUST support NFC Connection handover to Bluetooth when the device supports Bluetooth Object Push Profile.
  • [C-1-12] MUST support connection handover to Bluetooth when using android.nfc.NfcAdapter.setBeamPushUris , by implementing the “ Connection Handover version 1.2 ” and “ Bluetooth Secure Simple Pairing Using NFC version 1.0 ” specs from the NFC Forum. Such an implementation MUST implement the handover LLCP service with service name “urn:nfc:sn:handover” for exchanging the handover request/select records over NFC, and it MUST use the Bluetooth Object Push Profile for the actual Bluetooth data transfer. For legacy reasons (to remain compatible with Android 4.1 devices), the implementation SHOULD still accept SNEP GET requests for exchanging the handover request/select records over NFC. However an implementation itself SHOULD NOT send SNEP GET requests for performing connection handover.
  • [C-1-13] MUST poll for all supported technologies while in NFC discovery mode.
  • SHOULD be in NFC discovery mode while the device is awake with the screen active and the lock-screen unlocked.
  • SHOULD be capable of reading the barcode and URL (if encoded) of Thinfilm NFC Barcode products.

Note that publicly available links are not available for the JIS, ISO, and NFC Forum specifications cited above.

Android includes support for NFC Host Card Emulation (HCE) mode.

If device implementations include an NFC controller chipset capable of HCE (for NfcA and/or NfcB) and support Application ID (AID) routing, they:

  • [C-2-1] MUST report the android.hardware.nfc.hce feature constant.
  • [C-2-2] MUST support NFC HCE APIs as defined in the Android SDK.

If device implementations include an NFC controller chipset capable of HCE for NfcF, and implement the feature for third-party applications, they:

  • [C-3-1] MUST report the android.hardware.nfc.hcef feature constant.
  • [C-3-2] MUST implement the NfcF Card Emulation APIs as defined in the Android SDK.

If device implementations include general NFC support as described in this section and support MIFARE technologies (MIFARE Classic, MIFARE Ultralight, NDEF on MIFARE Classic) in the reader/writer role, they:

  • [C-4-1] MUST implement the corresponding Android APIs as documented by the Android SDK.
  • [C-4-2] MUST report the feature com.nxp.mifare from the android.content.pm.PackageManager.hasSystemFeature () method. Note that this is not a standard Android feature and as such does not appear as a constant in the android.content.pm.PackageManager class.

7.4.5. Minimum Ağ Yeteneği

Cihaz uygulamaları:

  • [C-0-1] MUST include support for one or more forms of data networking. Specifically, device implementations MUST include support for at least one data standard capable of 200 Kbit/sec or greater. Examples of technologies that satisfy this requirement include EDGE, HSPA, EV-DO, 802.11g, Ethernet and Bluetooth PAN.
  • SHOULD also include support for at least one common wireless data standard, such as 802.11 (Wi-Fi), when a physical networking standard (such as Ethernet) is the primary data connection.
  • MAY implement more than one form of data connectivity.
  • [C-0-2] MUST include an IPv6 networking stack and support IPv6 communication using the managed APIs, such as java.net.Socket and java.net.URLConnection , as well as the native APIs, such as AF_INET6 sockets.
  • [C-0-3] MUST enable IPv6 by default.
  • MUST ensure that IPv6 communication is as reliable as IPv4, for example:
    • [C-0-4] MUST maintain IPv6 connectivity in doze mode.
    • [C-0-5] Rate-limiting MUST NOT cause the device to lose IPv6 connectivity on any IPv6-compliant network that uses RA lifetimes of at least 180 seconds.
  • [C-0-6] MUST provide third-party applications with direct IPv6 connectivity to the network when connected to an IPv6 network, without any form of address or port translation happening locally on the device. Both managed APIs such as Socket#getLocalAddress or Socket#getLocalPort ) and NDK APIs such as getsockname() or IPV6_PKTINFO MUST return the IP address and port that is actually used to send and receive packets on the network.

The required level of IPv6 support depends on the network type, as shown in the following requirements.

If device implementations support Wi-Fi, they:

  • [C-1-1] MUST support dual-stack and IPv6-only operation on Wi-Fi.

If device implementations support Ethernet, they:

  • [C-2-1] MUST support dual-stack operation on Ethernet.

If device implementations support Cellular data, they:

  • SHOULD support IPv6 operation (IPv6-only and possibly dual-stack) on cellular.

If device implementations support more than one network type (eg, Wi-Fi and cellular data), they:

  • [C-3-1] MUST simultaneously meet the above requirements on each network when the device is simultaneously connected to more than one network type.

7.4.6. Ayarları Senkronize Et

Cihaz uygulamaları:

7.4.7. Data Saver

If device implementations include a metered connection, they are:

  • [SR] STRONGLY RECOMMENDED to provide the data saver mode.

If device implementations provide the data saver mode, they:

If device implementations do not provide the data saver mode, they:

  • [C-2-1] MUST return the value RESTRICT_BACKGROUND_STATUS_DISABLED for ConnectivityManager.getRestrictBackgroundStatus()
  • [C-2-2] MUST NOT broadcast ConnectivityManager.ACTION_RESTRICT_BACKGROUND_CHANGED .
  • [C-2-3] MUST have an activity that handles the Settings.ACTION_IGNORE_BACKGROUND_DATA_RESTRICTIONS_SETTINGS intent but MAY implement it as a no-op.

7.4.8. Secure Elements

If device implementations support Open Mobile API capable secure elements and make them available to 3rd-party apps, they:

7.5. Kameralar

If device implementations include at least one camera, they:

  • [C-1-1] MUST declare the android.hardware.camera.any feature flag.
  • [C-1-2] MUST be possible for an application to simultaneously allocate 3 RGBA_8888 bitmaps equal to the size of the images produced by the largest-resolution camera sensor on the device, while camera is open for the purpose of basic preview and still esir almak.

7.5.1. Arka yüz kamerası

A rear-facing camera is a camera located on the side of the device opposite the display; that is, it images scenes on the far side of the device, like a traditional camera.

Cihaz uygulamaları:

  • SHOULD include a rear-facing camera.

If device implementations include at least one rear-facing camera, they:

  • [C-1-1] MUST report the feature flag android.hardware.camera and android.hardware.camera.any .
  • [C-1-2] MUST have a resolution of at least 2 megapixels.
  • SHOULD have either hardware auto-focus or software auto-focus implemented in the camera driver (transparent to application software).
  • MAY have fixed-focus or EDOF (extended depth of field) hardware.
  • Bir flaş içerebilir.

If the camera includes a flash:

  • [C-2-1] the flash lamp MUST NOT be lit while an android.hardware.Camera.PreviewCallback instance has been registered on a Camera preview surface, unless the application has explicitly enabled the flash by enabling the FLASH_MODE_AUTO or FLASH_MODE_ON attributes of a Camera.Parameters nesnesi. Bu kısıtlamanın cihazın yerleşik sistem kamerası uygulaması için geçerli olmadığını, yalnızca Camera.PreviewCallback kullanan üçüncü taraf uygulamalar için geçerli olduğunu unutmayın.

7.5.2. Ön kamera

A front-facing camera is a camera located on the same side of the device as the display; that is, a camera typically used to image the user, such as for video conferencing and similar applications.

Cihaz uygulamaları:

  • MAY include a front-facing camera.

If device implementations include at least one front-facing camera, they:

  • [C-1-1] MUST report the feature flag android.hardware.camera.any and android.hardware.camera.front .
  • [C-1-2] MUST have a resolution of at least VGA (640x480 pixels).
  • [C-1-3] MUST NOT use a front-facing camera as the default for the Camera API and MUST NOT configure the API to treat a front-facing camera as the default rear-facing camera, even if it is the only camera on the device.
  • [C-1-4] The camera preview MUST be mirrored horizontally relative to the orientation specified by the application when the current application has explicitly requested that the Camera display be rotated via a call to the android.hardware.Camera.setDisplayOrientation() method . Conversely, the preview MUST be mirrored along the device's default horizontal axis when the current application does not explicitly request that the Camera display be rotated via a call to the android.hardware.Camera.setDisplayOrientation() method.
  • [C-1-5] MUST NOT mirror the final captured still image or video streams returned to application callbacks or committed to media storage.
  • [C-1-6] MUST mirror the image displayed by the postview in the same manner as the camera preview image stream.
  • MAY include features (such as auto-focus, flash, etc.) available to rear-facing cameras as described in section 7.5.1 .

If device implementations are capable of being rotated by user (such as automatically via an accelerometer or manually via user input):

  • [C-2-1] The camera preview MUST be mirrored horizontally relative to the device's current orientation.

7.5.3. Harici Kamera

Cihaz uygulamaları:

  • MAY include support for an external camera that is not necessarily always connected.

If device implementations include support for an external camera, they:

  • [C-1-1] MUST declare the platform feature flag android.hardware.camera.external and android.hardware camera.any .
  • [C-1-2] MUST support USB Video Class (UVC 1.0 or higher) if the external camera connects through the USB host port.
  • [C-1-3] MUST pass camera CTS tests with a physical external camera device connected. Details of camera CTS testing are available at source.android.com .
  • SHOULD support video compressions such as MJPEG to enable transfer of high-quality unencoded streams (ie raw or independently compressed picture streams).
  • MAY support multiple cameras.
  • MAY support camera-based video encoding.

If camera-based video encoding is supported:

  • [C-2-1] A simultaneous unencoded / MJPEG stream (QVGA or greater resolution) MUST be accessible to the device implementation.

7.5.4. Kamera API Davranışı

Android includes two API packages to access the camera, the newer android.hardware.camera2 API expose lower-level camera control to the app, including efficient zero-copy burst/streaming flows and per-frame controls of exposure, gain, white balance gains, color conversion, denoising, sharpening, and more.

The older API package, android.hardware.Camera , is marked as deprecated in Android 5.0 but as it should still be available for apps to use. Android device implementations MUST ensure the continued support of the API as described in this section and in the Android SDK.

All features that are common between the deprecated android.hardware.Camera class and the newer android.hardware.camera2 package MUST have equivalent performance and quality in both APIs. For example, with equivalent settings, autofocus speed and accuracy must be identical, and the quality of captured images must be the same. Features that depend on the different semantics of the two APIs are not required to have matching speed or quality, but SHOULD match as closely as possible.

Device implementations MUST implement the following behaviors for the camera-related APIs, for all available cameras. Cihaz uygulamaları:

  • [C-0-1] MUST use android.hardware.PixelFormat.YCbCr_420_SP for preview data provided to application callbacks when an application has never called android.hardware.Camera.Parameters.setPreviewFormat(int) .
  • [C-0-2] MUST further be in the NV21 encoding format when an application registers an android.hardware.Camera.PreviewCallback instance and the system calls the onPreviewFrame() method and the preview format is YCbCr_420_SP, the data in the byte[] passed into onPreviewFrame() . That is, NV21 MUST be the default.
  • [C-0-3] MUST support the YV12 format (as denoted by the android.graphics.ImageFormat.YV12 constant) for camera previews for both front- and rear-facing cameras for android.hardware.Camera . (The hardware video encoder and camera may use any native pixel format, but the device implementation MUST support conversion to YV12.)
  • [C-0-4] MUST support the android.hardware.ImageFormat.YUV_420_888 and android.hardware.ImageFormat.JPEG formats as outputs through the android.media.ImageReader API for android.hardware.camera2 devices that advertise REQUEST_AVAILABLE_CAPABILITIES_BACKWARD_COMPATIBLE capability in android.request.availableCapabilities .
  • [C-0-5] MUST still implement the full Camera API included in the Android SDK documentation, regardless of whether the device includes hardware autofocus or other capabilities. For instance, cameras that lack autofocus MUST still call any registered android.hardware.Camera.AutoFocusCallback instances (even though this has no relevance to a non-autofocus camera.) Note that this does apply to front-facing cameras; for instance, even though most front-facing cameras do not support autofocus, the API callbacks must still be “faked” as described.
  • [C-0-6] MUST recognize and honor each parameter name defined as a constant on the android.hardware.Camera.Parameters class. Conversely, device implementations MUST NOT honor or recognize string constants passed to the android.hardware.Camera.setParameters() method other than those documented as constants on the android.hardware.Camera.Parameters . Yani, donanım izin veriyorsa cihaz uygulamalarının tüm standart Kamera parametrelerini desteklemesi ZORUNLUDUR ve özel Kamera parametre türlerini DESTEKLEMEMELİDİR. For instance, device implementations that support image capture using high dynamic range (HDR) imaging techniques MUST support camera parameter Camera.SCENE_MODE_HDR .
  • [C-0-7] MUST report the proper level of support with the android.info.supportedHardwareLevel property as described in the Android SDK and report the appropriate framework feature flags .
  • [C-0-8] MUST also declare its individual camera capabilities of android.hardware.camera2 via the android.request.availableCapabilities property and declare the appropriate feature flags ; MUST define the feature flag if any of its attached camera devices supports the feature.
  • [C-0-9] MUST broadcast the Camera.ACTION_NEW_PICTURE intent whenever a new picture is taken by the camera and the entry of the picture has been added to the media store.
  • [C-0-10] MUST broadcast the Camera.ACTION_NEW_VIDEO intent whenever a new video is recorded by the camera and the entry of the picture has been added to the media store.
  • [C-SR] Are STRONGLY RECOMMENDED to support a logical camera device that lists capability CameraMetadata.REQUEST_AVAILABLE_CAPABILITIES_LOGICAL_MULTI_CAMERA , for devices with multiple cameras facing the same direction, consisting of each physical camera facing that direction, as long as the physical camera type is supported by the framework and CameraCharacteristics.INFO_SUPPORTED_HARDWARE_LEVEL for the physical cameras is either LIMITED , FULL , or LEVEL_3 .

7.5.5. Kamera Yönü

If device implementations have a front- or a rear-facing camera, such camera(s):

  • [C-1-1] MUST be oriented so that the long dimension of the camera aligns with the screen's long dimension. That is, when the device is held in the landscape orientation, cameras MUST capture images in the landscape orientation. This applies regardless of the device's natural orientation; that is, it applies to landscape-primary devices as well as portrait-primary devices.

7.6. Bellek ve Depolama

7.6.1. Minimum Bellek ve Depolama

Cihaz uygulamaları:

  • [C-0-1] MUST include a Download Manager that applications MAY use to download data files and they MUST be capable of downloading individual files of at least 100MB in size to the default “cache” location.

7.6.2. Uygulama Paylaşımlı Depolama Alanı

Cihaz uygulamaları:

  • [C-0-1] MUST offer storage to be shared by applications, also often referred as “shared external storage”, "application shared storage" or by the Linux path "/sdcard" it is mounted on.
  • [C-0-2] MUST be configured with shared storage mounted by default, in other words “out of the box”, regardless of whether the storage is implemented on an internal storage component or a removable storage medium (eg Secure Digital card slot ).
  • [C-0-3] MUST mount the application shared storage directly on the Linux path sdcard or include a Linux symbolic link from sdcard to the actual mount point.
  • [C-0-4] MUST enforce the android.permission.WRITE_EXTERNAL_STORAGE permission on this shared storage as documented in the SDK. Aksi halde, paylaşılan depolama bu izni alan herhangi bir uygulama tarafından yazılabilir OLMALIDIR.

Device implementations MAY meet the above requirements using either of the following:

  • User-accessible removable storage, such as a Secure Digital (SD) card slot.
  • A portion of the internal (non-removable) storage as implemented in the Android Open Source Project (AOSP).

If device implementations use removable storage to satisfy the above requirements, they:

  • [C-1-1] MUST implement a toast or pop-up user interface warning the user when there is no storage medium inserted in the slot.
  • [C-1-2] MUST include a FAT-formatted storage medium (eg SD card) or show on the box and other material available at time of purchase that the storage medium has to be purchased separately.

If device implementations use a portion of the non-removable storage to satisfy the above requirements, they:

  • SHOULD use the AOSP implementation of the internal application shared storage.
  • MAY share the storage space with the application private data.

If device implementations include multiple shared storage paths (such as both an SD card slot and shared internal storage), they:

  • [C-2-1] MUST allow only preinstalled and privileged Android applications with the WRITE_EXTERNAL_STORAGE permission to write to the secondary external storage, except when writing to their package-specific directories or within the URI returned by firing the ACTION_OPEN_DOCUMENT_TREE intent.

If device implementations have a USB port with USB peripheral mode support, they:

  • [C-3-1] MUST provide a mechanism to access the data on the application shared storage from a host computer.
  • SHOULD expose content from both storage paths transparently through Android's media scanner service and android.provider.MediaStore .
  • MAY use USB mass storage, but SHOULD use Media Transfer Protocol to satisfy this requirement.

If device implementations have a USB port with USB peripheral mode and support Media Transfer Protocol, they:

  • SHOULD be compatible with the reference Android MTP host, Android File Transfer .
  • SHOULD report a USB device class of 0x00.
  • SHOULD report a USB interface name of 'MTP'.

7.6.3. Adoptable Storage

If the device is expected to be mobile in nature unlike Television, device implementations are:

  • [SR] STRONGLY RECOMMENDED to implement the adoptable storage in a long-term stable location, since accidentally disconnecting them can cause data loss/corruption.

If the removable storage device port is in a long-term stable location, such as within the battery compartment or other protective cover, device implementations are:

7.7. USB

If device implementations have a USB port, they:

  • SHOULD support USB peripheral mode and SHOULD support USB host mode.

7.7.1. USB peripheral mode

If device implementations include a USB port supporting peripheral mode:

  • [C-1-1] The port MUST be connectable to a USB host that has a standard type-A or type-C USB port.
  • [C-1-2] MUST report the correct value of iSerialNumber in USB standard device descriptor through android.os.Build.SERIAL .
  • [C-1-3] MUST detect 1.5A and 3.0A chargers per the Type-C resistor standard and MUST detect changes in the advertisement if they support Type-C USB.
  • [SR] The port SHOULD use micro-B, micro-AB or Type-C USB form factor. Existing and new Android devices are STRONGLY RECOMMENDED to meet these requirements so they will be able to upgrade to the future platform releases.
  • [SR] The port SHOULD be located on the bottom of the device (according to natural orientation) or enable software screen rotation for all apps (including home screen), so that the display draws correctly when the device is oriented with the port at bottom . Existing and new Android devices are STRONGLY RECOMMENDED to meet these requirements so they will be able to upgrade to future platform releases.
  • [SR] SHOULD implement support to draw 1.5 A current during HS chirp and traffic as specified in the USB Battery Charging specification, revision 1.2 . Existing and new Android devices are STRONGLY RECOMMENDED to meet these requirements so they will be able to upgrade to the future platform releases.
  • [SR] STRONGLY RECOMMENDED to not support proprietary charging methods that modify Vbus voltage beyond default levels, or alter sink/source roles as such may result in interoperability issues with the chargers or devices that support the standard USB Power Delivery methods. While this is called out as "STRONGLY RECOMMENDED", in future Android versions we might REQUIRE all type-C devices to support full interoperability with standard type-C chargers.
  • [SR] STRONGLY RECOMMENDED to support Power Delivery for data and power role swapping when they support Type-C USB and USB host mode.
  • SHOULD support Power Delivery for high-voltage charging and support for Alternate Modes such as display out.
  • SHOULD implement the Android Open Accessory (AOA) API and specification as documented in the Android SDK documentation.

If device implementations include a USB port and implement the AOA specification, they:

  • [C-2-1] MUST declare support for the hardware feature android.hardware.usb.accessory .
  • [C-2-2] The USB mass storage class MUST include the string "android" at the end of the interface description iInterface string of the USB mass storage
  • SHOULD NOT implement AOAv2 audio documented in the Android Open Accessory Protocol 2.0 documentation. AOAv2 audio is deprecated as of Android version 8.0 (API level 26).

7.7.2. USB host mode

If device implementations include a USB port supporting host mode, they:

  • [C-1-1] MUST implement the Android USB host API as documented in the Android SDK and MUST declare support for the hardware feature android.hardware.usb.host .
  • [C-1-2] MUST implement support to connect standard USB peripherals, in other words, they MUST either:
    • Have an on-device type C port or ship with cable(s) adapting an on-device proprietary port to a standard USB type-C port (USB Type-C device).
    • Have an on-device type A or ship with cable(s) adapting an on-device proprietary port to a standard USB type-A port.
    • Have an on-device micro-AB port, which SHOULD ship with a cable adapting to a standard type-A port.
  • [C-1-3] MUST NOT ship with an adapter converting from USB type A or micro-AB ports to a type-C port (receptacle).
  • [SR] STRONGLY RECOMMENDED to implement the USB audio class as documented in the Android SDK documentation.
  • SHOULD support charging the connected USB peripheral device while in host mode; advertising a source current of at least 1.5A as specified in the Termination Parameters section of the USB Type-C Cable and Connector Specification Revision 1.2 for USB Type-C connectors or using Charging Downstream Port(CDP) output current range as specified in the USB Battery Charging specifications, revision 1.2 for Micro-AB connectors.
  • SHOULD implement and support USB Type-C standards.

If device implementations include a USB port supporting host mode and the USB audio class, they:

  • [C-2-1] MUST support the USB HID class .
  • [C-2-2] MUST support the detection and mapping of the following HID data fields specified in the USB HID Usage Tables and the Voice Command Usage Request to the KeyEvent constants as below:
    • Usage Page (0xC) Usage ID (0x0CD): KEYCODE_MEDIA_PLAY_PAUSE
    • Usage Page (0xC) Usage ID (0x0E9): KEYCODE_VOLUME_UP
    • Usage Page (0xC) Usage ID (0x0EA): KEYCODE_VOLUME_DOWN
    • Usage Page (0xC) Usage ID (0x0CF): KEYCODE_VOICE_ASSIST

If device implementations include a USB port supporting host mode and the Storage Access Framework (SAF), they:

  • [C-3-1] MUST recognize any remotely connected MTP (Media Transfer Protocol) devices and make their contents accessible through the ACTION_GET_CONTENT , ACTION_OPEN_DOCUMENT , and ACTION_CREATE_DOCUMENT intents. .

If device implementations include a USB port supporting host mode and USB Type-C, they:

  • [C-4-1] MUST implement Dual Role Port functionality as defined by the USB Type-C specification (section 4.5.1.3.3).
  • [SR] STRONGLY RECOMMENDED to support DisplayPort, SHOULD support USB SuperSpeed Data Rates, and are STRONGLY RECOMMENDED to support Power Delivery for data and power role swapping.
  • [SR] STRONGLY RECOMMENDED to NOT support Audio Adapter Accessory Mode as described in the Appendix A of the USB Type-C Cable and Connector Specification Revision 1.2 .
  • SHOULD implement the Try.* model that is most appropriate for the device form factor. For example a handheld device SHOULD implement the Try.SNK model.

7.8. Ses

7.8.1. Mikrofon

If device implementations include a microphone, they:

  • [C-1-1] MUST report the android.hardware.microphone feature constant.
  • [C-1-2] MUST meet the audio recording requirements in section 5.4 .
  • [C-1-3] MUST meet the audio latency requirements in section 5.6 .
  • [SR] Are STRONGLY RECOMMENDED to support near-ultrasound recording as described in section 7.8.3 .

If device implementations omit a microphone, they:

  • [C-2-1] MUST NOT report the android.hardware.microphone feature constant.
  • [C-2-2] MUST implement the audio recording API at least as no-ops, per section 7 .

7.8.2. Ses çıkışı

If device implementations include a speaker or an audio/multimedia output port for an audio output peripheral such as a 4 conductor 3.5mm audio jack or USB host mode port using USB audio class , they:

  • [C-1-1] MUST report the android.hardware.audio.output feature constant.
  • [C-1-2] MUST meet the audio playback requirements in section 5.5 .
  • [C-1-3] MUST meet the audio latency requirements in section 5.6 .
  • [SR] STRONGLY RECOMMENDED to support near-ultrasound playback as described in section 7.8.3 .

If device implementations do not include a speaker or audio output port, they:

  • [C-2-1] MUST NOT report the android.hardware.audio.output feature.
  • [C-2-2] MUST implement the Audio Output related APIs as no-ops at least.

For the purposes of this section, an "output port" is a physical interface such as a 3.5mm audio jack, HDMI, or USB host mode port with USB audio class. Support for audio output over radio-based protocols such as Bluetooth, WiFi, or cellular network does not qualify as including an "output port".

7.8.2.1. Analog Ses Bağlantı Noktaları

In order to be compatible with the headsets and other audio accessories using the 3.5mm audio plug across the Android ecosystem, if device implementations include one or more analog audio ports, they:

  • [C-SR] Are STRONGLY RECOMMENDED to include at least one of the audio port(s) to be a 4 conductor 3.5mm audio jack.

If device implementations have a 4 conductor 3.5mm audio jack, they:

  • [C-1-1] MUST support audio playback to stereo headphones and stereo headsets with a microphone.
  • [C-1-2] MUST support TRRS audio plugs with the CTIA pin-out order.
  • [C-1-3] MUST support the detection and mapping to the keycodes for the following 3 ranges of equivalent impedance between the microphone and ground conductors on the audio plug:
    • 70 ohm or less : KEYCODE_HEADSETHOOK
    • 210-290 ohm : KEYCODE_VOLUME_UP
    • 360-680 ohm : KEYCODE_VOLUME_DOWN
  • [C-1-4] MUST trigger ACTION_HEADSET_PLUG upon a plug insert, but only after all contacts on plug are touching their relevant segments on the jack.
  • [C-1-5] MUST be capable of driving at least 150mV ± 10% of output voltage on a 32 ohm speaker impedance.
  • [C-1-6] MUST have a microphone bias voltage between 1.8V ~ 2.9V.
  • [C-1-7] MUST detect and map to the keycode for the following range of equivalent impedance between the microphone and ground conductors on the audio plug:
    • 110-180 ohm: KEYCODE_VOICE_ASSIST
  • [C-SR] Are STRONGLY RECOMMENDED to support audio plugs with the OMTP pin-out order.
  • [C-SR] Are STRONGLY RECOMMEND to support audio recording from stereo headsets with a microphone.

If device implementations have a 4 conductor 3.5mm audio jack and support a microphone, and broadcast the android.intent.action.HEADSET_PLUG with the extra value microphone set as 1, they:

  • [C-2-1] MUST support the detection of microphone on the plugged in audio accessory.

7.8.3. Near-Ultrasound

Near-Ultrasound audio is the 18.5 kHz to 20 kHz band.

Cihaz uygulamaları:

If PROPERTY_SUPPORT_MIC_NEAR_ULTRASOUND is "true", the following requirements MUST be met by the VOICE_RECOGNITION and UNPROCESSED audio sources:

  • [C-1-1] The microphone's mean power response in the 18.5 kHz to 20 kHz band MUST be no more than 15 dB below the response at 2 kHz.
  • [C-1-2] The microphone's unweighted signal to noise ratio over 18.5 kHz to 20 kHz for a 19 kHz tone at -26 dBFS MUST be no lower than 50 dB.

If PROPERTY_SUPPORT_SPEAKER_NEAR_ULTRASOUND is "true":

  • [C-2-1] The speaker's mean response in 18.5 kHz - 20 kHz MUST be no lower than 40 dB below the response at 2 kHz.

7.9. Sanal gerçeklik

Android includes APIs and facilities to build "Virtual Reality" (VR) applications including high quality mobile VR experiences. Device implementations MUST properly implement these APIs and behaviors, as detailed in this section.

7.9.1. Virtual Reality Mode

Android includes support for VR Mode , a feature which handles stereoscopic rendering of notifications and disables monocular system UI components while a VR application has user focus.

7.9.2. Virtual Reality Mode - High Performance

If device implementations support VR mode, they:

  • [C-1-1] MUST have at least 2 physical cores.
  • [C-1-2] MUST declare the android.hardware.vr.high_performance feature.
  • [C-1-3] MUST support sustained performance mode.
  • [C-1-4] MUST support OpenGL ES 3.2.
  • [C-1-5] MUST support android.hardware.vulkan.level 0.
  • SHOULD support android.hardware.vulkan.level 1 or higher.
  • [C-1-6] MUST implement EGL_KHR_mutable_render_buffer , EGL_ANDROID_front_buffer_auto_refresh , EGL_ANDROID_get_native_client_buffer , EGL_KHR_fence_sync , EGL_KHR_wait_sync , EGL_IMG_context_priority , EGL_EXT_protected_content , EGL_EXT_image_gl_colorspace , and expose the extensions in the list of available EGL extensions.
  • [C-1-8] MUST implement GL_EXT_multisampled_render_to_texture2 , GL_OVR_multiview , GL_OVR_multiview2 , GL_OVR_multiview_multisampled_render_to_texture , GL_EXT_protected_textures , and expose the extensions in the list of available GL extensions.
  • [C-SR] Are STRONGLY RECOMMENDED to implement GL_EXT_external_buffer , GL_EXT_EGL_image_array , and expose the extensions in the list of available GL extensions.
  • [C-SR] Are STRONGLY RECOMMENDED to support Vulkan 1.1.
  • [C-SR] Are STRONGLY RECOMMENDED to implement VK_ANDROID_external_memory_android_hardware_buffer , VK_GOOGLE_display_timing , VK_KHR_shared_presentable_image , and expose it in the list of available Vulkan extensions.
  • [C-SR] Are STRONGLY RECOMMENDED to expose at least one Vulkan queue family where flags contain both VK_QUEUE_GRAPHICS_BIT and VK_QUEUE_COMPUTE_BIT , and queueCount is at least 2.
  • [C-1-7] The GPU and display MUST be able to synchronize access to the shared front buffer such that alternating-eye rendering of VR content at 60fps with two render contexts will be displayed with no visible tearing artifacts.
  • [C-1-9] MUST implement support for AHardwareBuffer flags AHARDWAREBUFFER_USAGE_GPU_DATA_BUFFER , AHARDWAREBUFFER_USAGE_SENSOR_DIRECT_DATA and AHARDWAREBUFFER_USAGE_PROTECTED_CONTENT as described in the NDK.
  • [C-1-10] MUST implement support for AHardwareBuffer s with any combination of the usage flags AHARDWAREBUFFER_USAGE_GPU_COLOR_OUTPUT , AHARDWAREBUFFER_USAGE_GPU_SAMPLED_IMAGE , AHARDWAREBUFFER_USAGE_PROTECTED_CONTENT for at least the following formats: AHARDWAREBUFFER_FORMAT_R5G6B5_UNORM , AHARDWAREBUFFER_FORMAT_R8G8B8A8_UNORM , AHARDWAREBUFFER_FORMAT_R10G10B10A2_UNORM , AHARDWAREBUFFER_FORMAT_R16G16B16A16_FLOAT .
  • [C-SR] Are STRONGLY RECOMMENDED to support the allocation of AHardwareBuffer s with more than one layer and flags and formats specified in C-1-10.
  • [C-1-11] MUST support H.264 decoding at least 3840 x 2160 at 30fps, compressed to an average of 40Mbps (equivalent to 4 instances of 1920 x1080 at 30 fps-10 Mbps or 2 instances of 1920 x 1080 at 60 fps-20 Mbps).
  • [C-1-12] MUST support HEVC and VP9, MUST be capable of decoding at least 1920 x 1080 at 30 fps compressed to an average of 10 Mbps and SHOULD be capable of decoding 3840 x 2160 at 30 fps-20 Mbps (equivalent to 4 instances of 1920 x 1080 at 30 fps-5 Mbps).
  • [C-1-13] MUST support HardwarePropertiesManager.getDeviceTemperatures API and return accurate values for skin temperature.
  • [C-1-14] MUST have an embedded screen, and its resolution MUST be at least 1920 x 1080.
  • [C-SR] Are STRONGLY RECOMMENDED to have a display resolution of at least 2560 x 1440.
  • [C-1-15] The display MUST update at least 60 Hz while in VR Mode.
  • [C-1-17] The display MUST support a low-persistence mode with ≤ 5 milliseconds persistence, persistence being defined as the amount of time for which a pixel is emitting light.
  • [C-1-18] MUST support Bluetooth 4.2 and Bluetooth LE Data Length Extension section 7.4.3 .
  • [C-1-19] MUST support and properly report Direct Channel Type for all of the following default sensor types:
    • TYPE_ACCELEROMETER
    • TYPE_ACCELEROMETER_UNCALIBRATED
    • TYPE_GYROSCOPE
    • TYPE_GYROSCOPE_UNCALIBRATED
    • TYPE_MAGNETIC_FIELD
    • TYPE_MAGNETIC_FIELD_UNCALIBRATED
  • [C-SR] Are STRONGLY RECOMMENDED to support the TYPE_HARDWARE_BUFFER direct channel type for all Direct Channel Types listed above.
  • [C-1-21] MUST meet the gyroscope, accelerometer, and magnetometer related requirements for android.hardware.hifi_sensors , as specified in section 7.3.9 .
  • [C-SR] Are STRONGLY RECOMMENDED to support the android.hardware.sensor.hifi_sensors feature.
  • [C-1-22] MUST have end-to-end motion to photon latency not higher than 28 milliseconds.
  • [C-SR] Are STRONGLY RECOMMENDED to have end-to-end motion to photon latency not higher than 20 milliseconds.
  • [C-1-23] MUST have first-frame ratio, which is the ratio between the brightness of pixels on the first frame after a transition from black to white and the brightness of white pixels in steady state, of at least 85%.
  • [C-SR] Are STRONGLY RECOMMENDED to have first-frame ratio of at least 90%.
  • MAY provide an exclusive core to the foreground application and MAY support the Process.getExclusiveCores API to return the numbers of the cpu cores that are exclusive to the top foreground application.

If exclusive core is supported, then the core:

  • [C-2-1] MUST not allow any other userspace processes to run on it (except device drivers used by the application), but MAY allow some kernel processes to run as necessary.

8. Performance and Power

Some minimum performance and power criteria are critical to the user experience and impact the baseline assumptions developers would have when developing an app.

8.1. Kullanıcı Deneyimi Tutarlılığı

A smooth user interface can be provided to the end user if there are certain minimum requirements to ensure a consistent frame rate and response times for applications and games. Device implementations, depending on the device type, MAY have measurable requirements for the user interface latency and task switching as described in section 2 .

8.2. File I/O Access Performance

Providing a common baseline for a consistent file access performance on the application private data storage ( /data partition) allows app developers to set a proper expectation that would help their software design. Device implementations, depending on the device type, MAY have certain requirements described in section 2 for the following read and write operations:

  • Sequential write performance . Measured by writing a 256MB file using 10MB write buffer.
  • Random write performance . Measured by writing a 256MB file using 4KB write buffer.
  • Sequential read performance . Measured by reading a 256MB file using 10MB write buffer.
  • Random read performance . Measured by reading a 256MB file using 4KB write buffer.

8.3. Power-Saving Modes

If device implementations include features to improve device power management that are included in AOSP or extend the features that are included in AOSP, they:

  • [C-1-1] MUST NOT deviate from the AOSP implementation for the triggering, maintenance, wakeup algorithms and the use of global system settings of App Standby and Doze power-saving modes.
  • [C-1-2] MUST NOT deviate from the AOSP implementation for the use of global settings to manage the throttling of jobs, alarm and network for apps in each bucket for App standby.
  • [C-1-3] MUST NOT deviate from the AOSP implementation for the number of the App Standby Buckets used for App Standby.
  • [C-1-4] MUST implement App Standby Buckets and Doze as described in Power Management .
  • [C-1-5] MUST return true for PowerManager.isPowerSaveMode() when the device is on power save mode.
  • [C-SR] Are STRONGLY RECOMMENDED to provide user affordance to enable and disable the battery saver feature.
  • [C-SR] Are STRONGLY RECOMMENDED to provide user affordance to display all Apps that are exempted from App Standby and Doze power-saving modes.

In addition to the power-saving modes, Android device implementations MAY implement any or all of the 4 sleeping power states as defined by the Advanced Configuration and Power Interface (ACPI).

If device implementations implement S4 power states as defined by the ACPI, they:

  • [C-1-1] MUST enter this state only after the user has taken an explicit action to put the device in an inactive state (eg by closing a lid that is physically part of the device or turning off a vehicle or television) and before the user re-activates the device (eg by opening the lid or turning the vehicle or television back on).

If device implementations implement S3 power states as defined by the ACPI, they:

  • [C-2-1] MUST meet C-1-1 above, or, MUST enter S3 state only when third-party applications do not need the system resources (eg the screen, CPU).

    Conversely, MUST exit from S3 state when third-party applications need the system resources, as described on this SDK.

    For example, while the third party applications request to keep the screen on through FLAG_KEEP_SCREEN_ON or keep CPU running through PARTIAL_WAKE_LOCK , the device MUST NOT enter S3 state unless, as described in C-1-1, the user has taken explicit action to put the device in an inactive state. Conversely, at a time when a task that third party apps implement through JobScheduler is triggered or Firebase Cloud Messaging is delivered to third party apps, the device MUST exit the S3 state unless the user has put the device in an inactive state. These are not comprehensive examples and AOSP implements extensive wake-up signals that trigger a wakeup from this state.

8.4. Power Consumption Accounting

A more accurate accounting and reporting of the power consumption provides the app developer both the incentives and the tools to optimize the power usage pattern of the application.

Cihaz uygulamaları:

  • [SR] STRONGLY RECOMMENDED to provide a per-component power profile that defines the current consumption value for each hardware component and the approximate battery drain caused by the components over time as documented in the Android Open Source Project site.
  • [SR] STRONGLY RECOMMENDED to report all power consumption values in milliampere hours (mAh).
  • [SR] STRONGLY RECOMMENDED to report CPU power consumption per each process's UID. Android Açık Kaynak Projesi, gereksinimi uid_cputime çekirdek modülü uygulaması aracılığıyla karşılar.
  • [SR] STRONGLY RECOMMENDED to make this power usage available via the adb shell dumpsys batterystats shell command to the app developer.
  • SHOULD be attributed to the hardware component itself if unable to attribute hardware component power usage to an application.

8.5. Consistent Performance

Performance can fluctuate dramatically for high-performance long-running apps, either because of the other apps running in the background or the CPU throttling due to temperature limits. Android includes programmatic interfaces so that when the device is capable, the top foreground application can request that the system optimize the allocation of the resources to address such fluctuations.

Cihaz uygulamaları:

If device implementations report support of Sustained Performance Mode, they:

  • [C-1-1] MUST provide the top foreground application a consistent level of performance for at least 30 minutes, when the app requests it.
  • [C-1-2] MUST honor the Window.setSustainedPerformanceMode() API and other related APIs.

If device implementations include two or more CPU cores, they:

  • SHOULD provide at least one exclusive core that can be reserved by the top foreground application.

If device implementations support reserving one exclusive core for the top foreground application, they:

  • [C-2-1] MUST report through the Process.getExclusiveCores() API method the ID numbers of the exclusive cores that can be reserved by the top foreground application.
  • [C-2-2] MUST not allow any user space processes except the device drivers used by the application to run on the exclusive cores, but MAY allow some kernel processes to run as necessary.

If device implementations do not support an exclusive core, they:

9. Güvenlik Modeli Uyumluluğu

Cihaz uygulamaları:

  • [C-0-1] MUST implement a security model consistent with the Android platform security model as defined in Security and Permissions reference document in the APIs in the Android developer documentation.

  • [C-0-2] MUST support installation of self-signed applications without requiring any additional permissions/certificates from any third parties/authorities. Specifically, compatible devices MUST support the security mechanisms described in the follow subsections.

9.1. İzinler

Cihaz uygulamaları:

  • [C-0-1] MUST support the Android permissions model as defined in the Android developer documentation. Specifically, they MUST enforce each permission defined as described in the SDK documentation; hiçbir izin atlanamaz, değiştirilemez veya göz ardı edilemez.

  • MAY add additional permissions, provided the new permission ID strings are not in the android.\* namespace.

  • [C-0-2] Permissions with a protectionLevel of PROTECTION_FLAG_PRIVILEGED MUST only be granted to apps preinstalled in the privileged path(s) of the system image and within the subset of the explicitly allowlisted permissions for each app. The AOSP implementation meets this requirement by reading and honoring the allowlisted permissions for each app from the files in the etc/permissions/ path and using the system/priv-app path as the privileged path.

Permissions with a protection level of dangerous are runtime permissions. Applications with targetSdkVersion > 22 request them at runtime.

Cihaz uygulamaları:

  • [C-0-3] MUST show a dedicated interface for the user to decide whether to grant the requested runtime permissions and also provide an interface for the user to manage runtime permissions.
  • [C-0-4] MUST have one and only one implementation of both user interfaces.
  • [C-0-5] MUST NOT grant any runtime permissions to preinstalled apps unless:
    • The user's consent can be obtained before the application uses it.
    • The runtime permissions are associated with an intent pattern for which the preinstalled application is set as the default handler.
  • [C-0-6] MUST grant the android.permission.RECOVER_KEYSTORE permission only to system apps that register a properly secured Recovery Agent. A properly secured Recovery Agent is defined as an on-device software agent that synchronizes with an off-device remote storage, that is equipped with secure hardware with protection equivalent or stronger than what is described in Google Cloud Key Vault Service to prevent brute-force attacks on the lockscreen knowledge factor.

If device implementations include a preinstalled app or wish to allow third-party apps to access the usage statistics, they:

  • [SR] are STRONGLY RECOMMENDED provide user-accessible mechanism to grant or revoke access to the usage stats in response to the android.settings.ACTION_USAGE_ACCESS_SETTINGS intent for apps that declare the android.permission.PACKAGE_USAGE_STATS permission.

If device implementations intend to disallow any apps, including preinstalled apps, from accessing the usage statistics, they:

  • [C-1-1] MUST still have an activity that handles the android.settings.ACTION_USAGE_ACCESS_SETTINGS intent pattern but MUST implement it as a no-op, that is to have an equivalent behavior as when the user is declined for access.

9.2. UID ve Süreç Yalıtımı

Cihaz uygulamaları:

  • [C-0-1] MUST support the Android application sandbox model, in which each application runs as a unique Unixstyle UID and in a separate process.
  • [C-0-2] MUST support running multiple applications as the same Linux user ID, provided that the applications are properly signed and constructed, as defined in the Security and Permissions reference .

9.3. Dosya Sistemi İzinleri

Cihaz uygulamaları:

9.4. Alternatif Yürütme Ortamları

Device implementations MUST keep consistency of the Android security and permission model, even if they include runtime environments that execute applications using some other software or technology than the Dalvik Executable Format or native code. Başka bir deyişle:

  • [C-0-1] Alternate runtimes MUST themselves be Android applications, and abide by the standard Android security model, as described elsewhere in section 9 .

  • [C-0-2] Alternate runtimes MUST NOT be granted access to resources protected by permissions not requested in the runtime's AndroidManifest.xml file via the < uses-permission > mechanism.

  • [C-0-3] Alternate runtimes MUST NOT permit applications to make use of features protected by Android permissions restricted to system applications.

  • [C-0-4] Alternate runtimes MUST abide by the Android sandbox model and installed applications using an alternate runtime MUST NOT reuse the sandbox of any other app installed on the device, except through the standard Android mechanisms of shared user ID and signing certificate .

  • [C-0-5] Alternate runtimes MUST NOT launch with, grant, or be granted access to the sandboxes corresponding to other Android applications.

  • [C-0-6] Alternate runtimes MUST NOT be launched with, be granted, or grant to other applications any privileges of the superuser (root), or of any other user ID.

  • [C-0-7] When the .apk files of alternate runtimes are included in the system image of device implementations, it MUST be signed with a key distinct from the key used to sign other applications included with the device implementations.

  • [C-0-8] When installing applications, alternate runtimes MUST obtain user consent for the Android permissions used by the application.

  • [C-0-9] When an application needs to make use of a device resource for which there is a corresponding Android permission (such as Camera, GPS, etc.), the alternate runtime MUST inform the user that the application will be able to access that resource.

  • [C-0-10] When the runtime environment does not record application capabilities in this manner, the runtime environment MUST list all permissions held by the runtime itself when installing any application using that runtime.

  • Alternate runtimes SHOULD install apps via the PackageManager into separate Android sandboxes (Linux user IDs, etc.).

  • Alternatif çalışma zamanları, alternatif çalışma zamanını kullanan tüm uygulamalar tarafından paylaşılan tek bir Android sanal alanı SAĞLAYABİLİR.

9.5. Çoklu Kullanıcı Desteği

Android includes support for multiple users and provides support for full user isolation.

  • Device implementations MAY but SHOULD NOT enable multi-user if they use removable media for primary external storage.

If device implementations include multiple users, they:

  • [C-1-1] MUST meet the following requirements related to multi-user support .
  • [C-1-2] MUST, for each user, implement a security model consistent with the Android platform security model as defined in Security and Permissions reference document in the APIs.
  • [C-1-3] MUST have separate and isolated shared application storage (aka /sdcard ) directories for each user instance.
  • [C-1-4] MUST ensure that applications owned by and running on behalf a given user cannot list, read, or write to the files owned by any other user, even if the data of both users are stored on the same volume or dosya sistemi.
  • [C-1-5] MUST encrypt the contents of the SD card when multiuser is enabled using a key stored only on non-removable media accessible only to the system if device implementations use removable media for the external storage APIs. As this will make the media unreadable by a host PC, device implementations will be required to switch to MTP or a similar system to provide host PCs with access to the current user's data.

If device implementations include multiple users and do not declare the android.hardware.telephony feature flag, they:

  • [C-2-1] MUST support restricted profiles, a feature that allows device owners to manage additional users and their capabilities on the device. With restricted profiles, device owners can quickly set up separate environments for additional users to work in, with the ability to manage finer-grained restrictions in the apps that are available in those environments.

If device implementations include multiple users and declare the android.hardware.telephony feature flag, they:

  • [C-3-1] MUST NOT support restricted profiles but MUST align with the AOSP implementation of controls to enable /disable other users from accessing the voice calls and SMS.

9.6. Premium SMS Uyarısı

Android includes support for warning users of any outgoing premium SMS message . Premium SMS messages are text messages sent to a service registered with a carrier that may incur a charge to the user.

If device implementations declare support for android.hardware.telephony , they:

  • [C-1-1] MUST warn users before sending a SMS message to numbers identified by regular expressions defined in /data/misc/sms/codes.xml file in the device. The upstream Android Open Source Project provides an implementation that satisfies this requirement.

9.7. Güvenlik özellikleri

Device implementations MUST ensure compliance with security features in both the kernel and platform as described below.

The Android Sandbox includes features that use the Security-Enhanced Linux (SELinux) mandatory access control (MAC) system, seccomp sandboxing, and other security features in the Linux kernel. Cihaz uygulamaları:

  • [C-0-1] MUST maintain compatibility with existing applications, even when SELinux or any other security features are implemented below the Android framework.
  • [C-0-2] MUST NOT have a visible user interface when a security violation is detected and successfully blocked by the security feature implemented below the Android framework, but MAY have a visible user interface when an unblocked security violation occurs resulting in a successful faydalanmak.
  • [C-0-3] MUST NOT make SELinux or any other security features implemented below the Android framework configurable to the user or app developer.
  • [C-0-4] MUST NOT allow an application that can affect another application through an API (such as a Device Administration API) to configure a policy that breaks compatibility.
  • [C-0-5] MUST split the media framework into multiple processes so that it is possible to more narrowly grant access for each process as described in the Android Open Source Project site.
  • [C-0-6] MUST implement a kernel application sandboxing mechanism which allows filtering of system calls using a configurable policy from multithreaded programs. The upstream Android Open Source Project meets this requirement through enabling the seccomp-BPF with threadgroup synchronization (TSYNC) as described in the Kernel Configuration section of source.android.com .

Kernel integrity and self-protection features are integral to Android security. Cihaz uygulamaları:

  • [C-0-7] MUST implement kernel stack buffer overflow protections (eg CONFIG_CC_STACKPROTECTOR_STRONG ).
  • [C-0-8] MUST implement strict kernel memory protections where executable code is read-only, read-only data is non-executable and non-writable, and writable data is non-executable (eg CONFIG_DEBUG_RODATA or CONFIG_STRICT_KERNEL_RWX ).
  • [C-0-9] MUST implement static and dynamic object size bounds checking of copies between user-space and kernel-space (eg CONFIG_HARDENED_USERCOPY ) on devices originally shipping with API level 28 or higher.
  • [C-0-10] MUST NOT execute user-space memory when executing in the kernel mode (eg hardware PXN, or emulated via CONFIG_CPU_SW_DOMAIN_PAN or CONFIG_ARM64_SW_TTBR0_PAN ) on devices originally shipping with API level 28 or higher.
  • [C-0-11] MUST NOT read or write user-space memory in the kernel outside of normal usercopy access APIs (eg hardware PAN, or emulated via CONFIG_CPU_SW_DOMAIN_PAN or CONFIG_ARM64_SW_TTBR0_PAN ) on devices originally shipping with API level 28 or higher.
  • [C-0-12] MUST implement kernel page table isolation on all devices originally shipping with API level 28 or higher (eg CONFIG_PAGE_TABLE_ISOLATION or `CONFIG_UNMAP_KERNEL_AT_EL0).
  • [SR] STRONGLY RECOMMENDED to keep kernel data which is written only during initialization marked read-only after initialization (eg __ro_after_init ).
  • [SR] STRONGLY RECOMMENDED to randomize the layout of the kernel code and memory, and to avoid exposures that would compromise the randomization (eg CONFIG_RANDOMIZE_BASE with bootloader entropy via the /chosen/kaslr-seed Device Tree node or EFI_RNG_PROTOCOL ).

If device implementations use a Linux kernel, they:

  • [C-1-1] MUST implement SELinux.
  • [C-1-2] MUST set SELinux to global enforcing mode.
  • [C-1-3] MUST configure all domains in enforcing mode. No permissive mode domains are allowed, including domains specific to a device/vendor.
  • [C-1-4] MUST NOT modify, omit, or replace the neverallow rules present within the system/sepolicy folder provided in the upstream Android Open Source Project (AOSP) and the policy MUST compile with all neverallow rules present, for both AOSP SELinux domains as well as device/vendor specific domains.
  • [C-1-5] MUST run third-party applications targeting API level 28 or higher in per-application SELinux sandboxes with per-app SELinux restrictions on each application's private data directory.
  • SHOULD retain the default SELinux policy provided in the system/sepolicy folder of the upstream Android Open Source Project and only further add to this policy for their own device-specific configuration.

If device implementations use kernel other than Linux, they:

  • [C-2-1] MUST use a mandatory access control system that is equivalent to SELinux.

Android contains multiple defense-in-depth features that are integral to device security.

Cihaz uygulamaları:

  • [C-SR] Are STRONGLY RECOMMENDED not to disable Control-Flow Integrity (CFI) or Integer Overflow Sanitization (IntSan) on components that have it enabled.
  • [C-SR] Are STRONGLY RECOMMENDED to enable both CFI and IntSan for any additional security-sensitive userspace components as explained in CFI and IntSan .

9.8. Mahremiyet

9.8.1. Usage History

Android stores the history of the user's choices and manages such history by UsageStatsManager .

Cihaz uygulamaları:

  • [C-0-1] MUST keep a reasonable retention period of such user history.
  • [SR] Are STRONGLY RECOMMENDED to keep the 14 days retention period as configured by default in the AOSP implementation.

Android stores the system events using the StatsLog identifiers, and manages such history via the StatsManager and the IncidentManager System API.

Cihaz uygulamaları:

  • [C-0-2] MUST only include the fields marked with DEST_AUTOMATIC in the incident report created by the System API class IncidentManager .
  • [C-0-3] MUST not use the system event identifiers to log any other event than what is described in the StatsLog SDK documents. If additional system events are logged, they MAY use a different atom identifier in the range between 100,000 and 200,000.

9.8.2. Kayıt

Cihaz uygulamaları:

  • [C-0-1] MUST NOT preload or distribute software components out-of-box that send the user's private information (eg keystrokes, text displayed on the screen) off the device without the user's consent or clear ongoing notifications.

If device implementations include functionality in the system that captures the contents displayed on the screen and/or records the audio stream played on the device, they:

  • [C-1-1] MUST have an ongoing notification to the user whenever this functionality is enabled and actively capturing/recording.

If device implementations include a component enabled out-of-box, capable of recording ambient audio to infer useful information about user's context, they:

  • [C-2-1] MUST NOT store in persistent on-device storage or transmit off the device the recorded raw audio or any format that can be converted back into the original audio or a near facsimile, except with explicit user consent.

9.8.3. Bağlantı

If device implementations have a USB port with USB peripheral mode support, they:

  • [C-1-1] MUST present a user interface asking for the user's consent before allowing access to the contents of the shared storage over the USB port.

9.8.4. Ağ trafiği

Cihaz uygulamaları:

  • [C-0-1] MUST preinstall the same root certificates for the system-trusted Certificate Authority (CA) store as provided in the upstream Android Open Source Project.
  • [C-0-2] MUST ship with an empty user root CA store.
  • [C-0-3] MUST display a warning to the user indicating the network traffic may be monitored, when a user root CA is added.

If device traffic is routed through a VPN, device implementations:

  • [C-1-1] MUST display a warning to the user indicating either:
    • That network traffic may be monitored.
    • That network traffic is being routed through the specific VPN application providing the VPN.

If device implementations have a mechanism, enabled out-of-box by default, that routes network data traffic through a proxy server or VPN gateway (for example, preloading a VPN service with android.permission.CONTROL_VPN granted), they:

  • [C-2-1] MUST ask for the user's consent before enabling that mechanism, unless that VPN is enabled by the Device Policy Controller via the DevicePolicyManager.setAlwaysOnVpnPackage() , in which case the user does not need to provide a separate consent, but MUST only be notified.

If device implementations implement a user affordance to toggle on the "always-on VPN" function of a 3rd-party VPN app, they:

  • [C-3-1] MUST disable this user affordance for apps that do not support always-on VPN service in the AndroidManifest.xml file via setting the SERVICE_META_DATA_SUPPORTS_ALWAYS_ON attribute to false .

9.9. Data Storage Encryption

If Advanced Encryption Standard (AES) crypto performance, measured with the most performant AES technology available on the device (eg the ARM Cryptography Extensions), is above 50 MiB/sec, device implementations:

  • [C-1-1] MUST support data storage encryption of the application private data ( /data partition), as well as the application shared storage partition ( /sdcard partition) if it is a permanent, non-removable part of the device, except for device implementations that are typically shared (eg Television).
  • [C-1-2] MUST enable the data storage encryption by default at the time the user has completed the out-of-box setup experience, except for device implementations that are typically shared (eg Television).

If the AES crypto performance is at or below 50 MiB/sec, device implementations MAY use Adiantum-XChaCha12-AES instead of the form of AES listed in any of the following: AES-256-XTS in Section 9.9.2 [C-1-5]; AES-256 in CBS-CTS mode in Section 9.9.2 [C-1-6]; AES in Section 9.9.3 [C-1-1]; AES in Section 9.9.3 [C-1-3].

If device implementations are already launched on an earlier Android version and cannot meet the requirement through a system software update, they MAY be exempted from the above requirements.

Cihaz uygulamaları:

9.9.1. Direct Boot

Cihaz uygulamaları:

  • [C-0-1] MUST implement the Direct Boot mode APIs even if they do not support Storage Encryption.

  • [C-0-2] The ACTION_LOCKED_BOOT_COMPLETED and ACTION_USER_UNLOCKED Intents MUST still be broadcast to signal Direct Boot aware applications that Device Encrypted (DE) and Credential Encrypted (CE) storage locations are available for user.

9.9.2. File Based Encryption

If device implementations support FBE, they:

  • [C-1-1] MUST boot up without challenging the user for credentials and allow Direct Boot aware apps to access to the Device Encrypted (DE) storage after the ACTION_LOCKED_BOOT_COMPLETED message is broadcasted.
  • [C-1-2] MUST only allow access to Credential Encrypted (CE) storage after the user has unlocked the device by supplying their credentials (eg. passcode, pin, pattern or fingerprint) and the ACTION_USER_UNLOCKED message is broadcasted.
  • [C-1-3] MUST NOT offer any method to unlock the CE protected storage without either the user-supplied credentials or a registered escrow key.
  • [C-1-4] MUST support Verified Boot and ensure that DE keys are cryptographically bound to the device's hardware root of trust.
  • [C-1-5] MUST support encrypting file contents using AES-256-XTS. AES-256-XTS refers to the Advanced Encryption Standard with a 256-bit key length, operated in XTS mode. The full length of the XTS key is 512 bits.
  • [C-1-6] MUST support encrypting file names using AES-256 in CBC-CTS mode.

  • The keys protecting CE and DE storage areas:

  • [C-1-7] MUST be cryptographically bound to a hardware-backed Keystore.

  • [C-1-8] CE keys MUST be bound to a user's lock screen credentials.
  • [C-1-9] CE keys MUST be bound to a default passcode when the user has not specified lock screen credentials.
  • [C-1-10] MUST be unique and distinct, in other words no user's CE or DE key matches any other user's CE or DE keys.

  • [C-1-11] MUST use the mandatorily supported ciphers, key lengths and modes by default.

  • [C-SR] Are STRONGLY RECOMMENDED to encrypt file system metadata, such as file sizes, ownership, modes, and Extended attributes (xattrs), with a key cryptographically bound to the device's hardware root of trust.

  • SHOULD make preinstalled essential apps (eg Alarm, Phone, Messenger) Direct Boot aware.

  • MAY support alternative ciphers, key lengths and modes for file content and file name encryption.

The upstream Android Open Source project provides a preferred implementation of this feature based on the Linux kernel ext4 encryption feature.

9.9.3. Full Disk Encryption

If device implementations support full disk encryption (FDE), they:

  • [C-1-1] MUST use AES in a mode designed for storage (for example, XTS or CBC-ESSIV), and with a cipher key length of 128 bits or greater.
  • [C-1-2] MUST use a default passcode to wrap the encryption key and MUST NOT write the encryption key to storage at any time without being encrypted.
  • [C-1-3] MUST AES encrypt the encryption key by default unless the user explicitly opts out, except when it is in active use, with the lock screen credentials stretched using a slow stretching algorithm (eg PBKDF2 or scrypt).
  • [C-1-4] The above default password stretching algorithm MUST be cryptographically bound to that keystore when the user has not specified a lock screen credentials or has disabled use of the passcode for encryption and the device provides a hardware-backed keystore.
  • [C-1-5] MUST NOT send encryption key off the device (even when wrapped with the user passcode and/or hardware bound key).

The upstream Android Open Source project provides a preferred implementation of this feature, based on the Linux kernel feature dm-crypt.

9.10. Device Integrity

The following requirements ensures there is transparency to the status of the device integrity. Cihaz uygulamaları:

  • [C-0-1] MUST correctly report through the System API method PersistentDataBlockManager.getFlashLockState() whether their bootloader state permits flashing of the system image. The FLASH_LOCK_UNKNOWN state is reserved for device implementations upgrading from an earlier version of Android where this new system API method did not exist.

  • [C-0-2] MUST support Verified Boot for device integrity.

If device implementations are already launched without supporting Verified Boot on an earlier version of Android and can not add support for this feature with a system software update, they MAY be exempted from the requirement.

Verified Boot is a feature that guarantees the integrity of the device software. If device implementations support the feature, they:

  • [C-1-1] MUST declare the platform feature flag android.software.verified_boot .
  • [C-1-2] MUST perform verification on every boot sequence.
  • [C-1-3] MUST start verification from an immutable hardware key that is the root of trust and go all the way up to the system partition.
  • [C-1-4] MUST implement each stage of verification to check the integrity and authenticity of all the bytes in the next stage before executing the code in the next stage.
  • [C-1-5] MUST use verification algorithms as strong as current recommendations from NIST for hashing algorithms (SHA-256) and public key sizes (RSA-2048).
  • [C-1-6] MUST NOT allow boot to complete when system verification fails, unless the user consents to attempt booting anyway, in which case the data from any non-verified storage blocks MUST not be used.
  • [C-1-7] MUST NOT allow verified partitions on the device to be modified unless the user has explicitly unlocked the bootloader.
  • [C-SR] If there are multiple discrete chips in the device (eg radio, specialized image processor), the boot process of each of those chips is STRONGLY RECOMMENDED to verify every stage upon booting.
  • [C-1-8] MUST use tamper-evident storage: for storing whether the bootloader is unlocked. Tamper-evident storage means that the boot loader can detect if the storage has been tampered with from inside Android.
  • [C-1-9] MUST prompt the user, while using the device, and require physical confirmation before allowing a transition from boot loader locked mode to boot loader unlocked mode.
  • [C-1-10] MUST implement rollback protection for partitions used by Android (eg boot, system partitions) and use tamper-evident storage for storing the metadata used for determining the minimum allowable OS version.
  • [C-SR] Are STRONGLY RECOMMENDED to verify all privileged app APK files with a chain of trust rooted in /system , which is protected by Verified Boot.
  • [C-SR] Are STRONGLY RECOMMENDED to verify any executable artifacts loaded by a privileged app from outside its APK file (such as dynamically loaded code or compiled code) before executing them or STRONGLY RECOMMENDED not to execute them at all.
  • SHOULD implement rollback protection for any component with persistent firmware (eg modem, camera) and SHOULD use tamper-evident storage for storing the metadata used for determining the minimum allowable version.

If device implementations are already launched without supporting C-1-8 through C-1-10 on an earlier version of Android and can not add support for these requirements with a system software update, they MAY be exempted from the requirements.

The upstream Android Open Source Project provides a preferred implementation of this feature in the external/avb/ repository, which can be integrated into the boot loader used for loading Android.

Cihaz uygulamaları:

If device implementations support the Android Protected Confirmation API they:

  • [C-3-1] MUST report true for the ConfirmationPrompt.isSupported() API.
  • [C-3-2] MUST ensure that secure hardware takes full control of display in such a way that Android OS cannot block it without detection by the secure hardware.
  • [C-3-3] MUST ensure that secure hardware takes full control of the touch screen.

9.11. Keys and Credentials

The Android Keystore System allows app developers to store cryptographic keys in a container and use them in cryptographic operations through the KeyChain API or the Keystore API . Cihaz uygulamaları:

  • [C-0-1] MUST allow at least 8,192 keys to be imported or generated.
  • [C-0-2] The lock screen authentication MUST rate-limit attempts and MUST have an exponential backoff algorithm. Beyond 150 failed attempts, the delay MUST be at least 24 hours per attempt.
  • SHOULD not limit the number of keys that can be generated

When the device implementation supports a secure lock screen, it:

  • [C-1-1] MUST back up the keystore implementation with an isolated execution environment.
  • [C-1-2] MUST have implementations of RSA, AES, ECDSA and HMAC cryptographic algorithms and MD5, SHA1, and SHA-2 family hash functions to properly support the Android Keystore system's supported algorithms in an area that is securely isolated from the code running on the kernel and above. Secure isolation MUST block all potential mechanisms by which kernel or userspace code might access the internal state of the isolated environment, including DMA. The upstream Android Open Source Project (AOSP) meets this requirement by using the Trusty implementation, but another ARM TrustZone-based solution or a third-party reviewed secure implementation of a proper hypervisor-based isolation are alternative options.
  • [C-1-3] MUST perform the lock screen authentication in the isolated execution environment and only when successful, allow the authentication-bound keys to be used. Lock screen credentials MUST be stored in a way that allows only the isolated execution environment to perform lock screen authentication. The upstream Android Open Source Project provides the Gatekeeper Hardware Abstraction Layer (HAL) and Trusty, which can be used to satisfy this requirement.
  • [C-1-4] MUST support key attestation where the attestation signing key is protected by secure hardware and signing is performed in secure hardware. The attestation signing keys MUST be shared across large enough number of devices to prevent the keys from being used as device identifiers. One way of meeting this requirement is to share the same attestation key unless at least 100,000 units of a given SKU are produced. If more than 100,000 units of an SKU are produced, a different key MAY be used for each 100,000 units.
  • [C-1-5] MUST allow the user to choose the Sleep timeout for transition from the unlocked to the locked state, with a minimum allowable timeout up to 15 seconds.

Note that if a device implementation is already launched on an earlier Android version, such a device is exempted from the requirement to have a keystore backed by an isolated execution environment and support the key attestation, unless it declares the android.hardware.fingerprint feature which requires a keystore backed by an isolated execution environment.

9.11.1. Secure Lock Screen

The AOSP implementation follows a tiered authentication model where a knowledge-factory based primary authentication can be backed by either a secondary strong biometric, or by weaker tertiary modalities.

Cihaz uygulamaları:

  • [C-SR] Are STRONGLY RECOMMENDED to set only one of the following as the primary authentication method:
    • A numerical PIN
    • An alphanumerical password
    • A swipe pattern on a grid of exactly 3x3 dots

Note that the above authentication methods are referred as the recommended primary authentication methods in this document.

If device implementations add or modify the recommended primary authentication methods and use a new authentication method as a secure way to lock the screen, the new authentication method:

If device implementations add or modify the authentication methods to unlock the lock screen if based on a known secret and use a new authentication method to be treated as a secure way to lock the screen:

  • [C-3-1] The entropy of the shortest allowed length of inputs MUST be greater than 10 bits.
  • [C-3-2] The maximum entropy of all possible inputs MUST be greater than 18 bits.
  • [C-3-3] The new authentication method MUST NOT replace any of the recommended primary authentication methods (ie PIN, pattern, password) implemented and provided in AOSP.
  • [C-3-4] The new authentication method MUST be disabled when the Device Policy Controller (DPC) application has set the password quality policy via the DevicePolicyManager.setPasswordQuality() method with a more restrictive quality constant than PASSWORD_QUALITY_SOMETHING .

If device implementations add or modify the recommended primary authentication methods to unlock the lock screen and use a new authentication method that is based on biometrics to be treated as a secure way to lock the screen, the new method:

  • [C-4-1] MUST meet all requirements described in section 7.3.10.2 .
  • [C-4-2] MUST have a fall-back mechanism to use one of the recommended primary authentication methods which is based on a known secret.
  • [C-4-3] MUST be disabled and only allow the recommended primary authentication to unlock the screen when the Device Policy Controller (DPC) application has set the keguard feature policy by calling the method DevicePolicyManager.setKeyguardDisabledFeatures() , with any of the associated biometric flags (ie KEYGUARD_DISABLE_BIOMETRICS , KEYGUARD_DISABLE_FINGERPRINT , KEYGUARD_DISABLE_FACE , or KEYGUARD_DISABLE_IRIS ).
  • [C-4-4] MUST challenge the user for the recommended primary authentication (eg PIN, pattern, password) at least once every 72 hours or less.
  • [C-4-5] MUST have a false acceptance rate that is equal or stronger than what is required for a fingerprint sensor as described in section section 7.3.10 , or otherwise MUST be disabled and only allow the recommended primary authentication to unlock the screen when the Device Policy Controller (DPC) application has set the password quality policy via the DevicePolicyManager.setPasswordQuality() method with a more restrictive quality constant than PASSWORD_QUALITY_BIOMETRIC_WEAK .
  • [C-SR] Are STRONGLY RECOMMENDED to have spoof and imposter acceptance rates that are equal to or stronger than what is required for a fingerprint sensor as described in section 7.3.10 .
  • [C-4-6] MUST have a secure processing pipeline such that an operating system or kernel compromise cannot allow data to be directly injected to falsely authenticate as the user.
  • [C-4-7] MUST be paired with an explicit confirm action (eg: a button press) to allow access to keystore keys if the application sets true for KeyGenParameterSpec.Built.setUserAuthenticationRequired() and the biometric is passive (eg face or iris where no explicit signal of intent exists).
  • [C-SR] The confirm action for passive biometrics is STRONGLY RECOMMENDED to be secured such that an operating system or kernel compromise cannot spoof it. For example, this means that the confirm action based on a physical button is routed through an input-only general-purpose input/output (GPIO) pin of a secure element (SE) that cannot be driven by any other means than a physical button basmak.

If the biometric authentication methods do not meet the spoof and imposter acceptance rates as described in section 7.3.10 :

  • [C-5-1] The methods MUST be disabled if the Device Policy Controller (DPC) application has set the password quality policy via the DevicePolicyManager.setPasswordQuality() method with a more restrictive quality constant than PASSWORD_QUALITY_BIOMETRIC_WEAK .
  • [C-5-2] The user MUST be challenged for the recommended primary authentication (eg: PIN, pattern, password) after any 4-hour idle timeout period. The idle timeout period is reset after any successful confirmation of the device credentials.
  • [C-5-3] The methods MUST NOT be treated as a secure lock screen, and MUST meet the requirements that start with C-8 in this section below.

If device implementations add or modify the authentication methods to unlock the lock screen and a new authentication method is based on a physical token or the location:

  • [C-6-1] They MUST have a fall-back mechanism to use one of the recommended primary authentication methods which is based on a known secret and meet the requirements to be treated as a secure lock screen.
  • [C-6-2] The new method MUST be disabled and only allow one of the recommended primary authentication methods to unlock the screen when the Device Policy Controller (DPC) application has set the policy with either the DevicePolicyManager.setKeyguardDisabledFeatures(KEYGUARD_DISABLE_TRUST_AGENTS) method or the DevicePolicyManager.setPasswordQuality() method with a more restrictive quality constant than PASSWORD_QUALITY_UNSPECIFIED .
  • [C-6-3] The user MUST be challenged for one of the recommended primary authentication methods (egPIN, pattern, password) at least once every 72 hours or less.
  • [C-6-4] The new method MUST NOT be treated as a secure lock screen and MUST follow the constraints listed in C-8 below.

If device implementations have a secure lock screen and include one or more trust agent, which implements the TrustAgentService System API, they:

  • [C-7-1] MUST have clear indication in the settings menu and on the lock screen when device lock is deferred or can be unlocked by trust agent(s). For example, AOSP meets this requirement by showing a text description for the "Automatically lock setting" and "Power button instantly locks" in the settings menu and a distinguishable icon on the lock screen.
  • [C-7-2] MUST respect and fully implement all trust agent APIs in the DevicePolicyManager class, such as the KEYGUARD_DISABLE_TRUST_AGENTS constant.
  • [C-7-3] MUST NOT fully implement the TrustAgentService.addEscrowToken() function on a device that is used as a primary personal device (eg handheld) but MAY fully implement the function on device implementations that are typically shared (eg Android Television or Automotive device).
  • [C-7-4] MUST encrypt all stored tokens added by TrustAgentService.addEscrowToken() .
  • [C-7-5] MUST NOT store the encryption key on the same device where the key is used. For example, it is allowed for a key stored on a phone to unlock a user account on a TV.
  • [C-7-6] MUST inform the user about the security implications before enabling the escrow token to decrypt the data storage.
  • [C-7-7] MUST have a fall-back mechanism to use one of the recommended primary authentication methods.
  • [C-7-8] The user MUST be challenged for one of the recommended primary authentication (eg: PIN, pattern, password) methods at least once every 72 hours or less.
  • [C-7-9] The user MUST be challenged for one of the recommended primary authentication (eg: PIN, pattern, password) methods after any 4-hour idle timeout period. The idle timeout period is reset after any successful confirmation of the device credentials.
  • [C-7-10] MUST NOT be treated as a secure lock screen and MUST follow the constraints listed in C-8 below.

If device implementations add or modify the authentication methods to unlock the lock screen that is not a secure lock screen as described above, and use a new authentication method to unlock the keyguard:

9.11.2. Kasa

The Android Keystore System allows app developers to store cryptographic keys in a dedicated secure processor as well as the isolated execution environment described above.

Cihaz uygulamaları:

  • [C-SR] Are STRONGLY RECOMMENDED to support StrongBox.

If device implementations support StrongBox, they:

  • [C-1-1] MUST declare FEATURE_STRONGBOX_KEYSTORE .

  • [C-1-2] MUST provide dedicated secure hardware that is used to back keystore and secure user authentication.

  • [C-1-3] MUST have a discrete CPU that shares no cache, DRAM, coprocessors or other core resources with the application processor (AP).

  • [C-1-4] MUST ensure that any peripherals shared with the AP cannot alter StrongBox processing in any way, or obtain any information from the StrongBox. The AP MAY disable or block access to StrongBox.

  • [C-1-5] MUST have an internal clock with reasonable accuracy (+-10%) that is immune to manipulation by the AP.

  • [C-1-6] MUST have a true random number generator that produces uniformly-distributed and unpredictable output.

  • [C-1-7] MUST have tamper resistance, including resistance against physical penetration, and glitching.

  • [C-1-8] MUST have side-channel resistance, including resistance against leaking information via power, timing, electromagnetic radiation, and thermal radiation side channels.

  • [C-1-9] MUST have secure storage which ensures confidentiality, integrity, authenticity, consistency, and freshness of the contents. The storage MUST NOT be able to be read or altered, except as permitted by the StrongBox APIs.

  • To validate compliance with [C-1-3] through [C-1-9], device implementations:

    • [C-1-10] MUST include the hardware that is certified against the Secure IC Protection Profile BSI-CC-PP-0084-2014 or evaluated by a nationally accredited testing laboratory incorporating High attack potential vulnerability assessment according to the Common Criteria Application of Attack Potential to Smartcards .
    • [C-1-11] MUST include the firmware that is evaluated by a nationally accredited testing laboratory incorporating High attack potential vulnerability assessment according to the Common Criteria Application of Attack Potential to Smartcards .
    • [C-SR] Are STRONGLY RECOMMENDED to include the hardware that is evaluated using a Security Target, Evaluation Assurance Level (EAL) 5, augmented by AVA_VAN.5. EAL 5 certification will likely become a requirement in a future release.
  • [C-SR] are STRONGLY RECOMMENDED to provide insider attack resistance (IAR), which means that an insider with access to firmware signing keys cannot produce firmware that causes the StrongBox to leak secrets, to bypass functional security requirements or otherwise enable access to sensitive Kullanıcı bilgisi. The recommended way to implement IAR is to allow firmware updates only when the primary user password is provided via the IAuthSecret HAL.

9.12. Data Deletion

All device implementations:

  • [C-0-1] MUST provide users a mechanism to perform a "Factory Data Reset".
  • [C-0-2] MUST delete all user-generated data. That is, all data except for the following:
    • The system image
    • Any operating system files required by the system image
  • [C-0-3] MUST delete the data in such a way that will satisfy relevant industry standards such as NIST SP800-88.
  • [C-0-4] MUST trigger the above "Factory Data Reset" process when the DevicePolicyManager.wipeData() API is called by the primary user's Device Policy Controller app.
  • MAY provide a fast data wipe option that conducts only a logical data erase.

9.13. Safe Boot Mode

Android provides Safe Boot Mode, which allows users to boot up into a mode where only preinstalled system apps are allowed to run and all third-party apps are disabled. This mode, known as "Safe Boot Mode", provides the user the capability to uninstall potentially harmful third-party apps.

Device implementations are:

  • [SR] STRONGLY RECOMMENDED to implement Safe Boot Mode.

If device implementations implement Safe Boot Mode, they:

  • [C-1-1] MUST provide the user an option to enter Safe Boot Mode in such a way that is uninterruptible from third-party apps installed on the device, except when the third-party app is a Device Policy Controller and has set the UserManager.DISALLOW_SAFE_BOOT flag as true.

  • [C-1-2] MUST provide the user the capability to uninstall any third-party apps within Safe Mode.

  • SHOULD provide the user an option to enter Safe Boot Mode from the boot menu using a workflow that is different from that of a normal boot.

9.14. Automotive Vehicle System Isolation

Android Automotive devices are expected to exchange data with critical vehicle subsystems by using the vehicle HAL to send and receive messages over vehicle networks such as CAN bus.

The data exchange can be secured by implementing security features below the Android framework layers to prevent malicious or unintentional interaction with these subsystems.

9.15. Abonelik Planları

"Subscription plans" refer to the billing relationship plan details provided by a mobile carrier through SubscriptionManager.setSubscriptionPlans() .

All device implementations:

  • [C-0-1] MUST return subscription plans only to the mobile carrier app that has originally provided them.
  • [C-0-2] MUST NOT remotely back up or upload subscription plans.
  • [C-0-3] MUST only allow overrides, such as SubscriptionManager.setSubscriptionOverrideCongested() , from the mobile carrier app currently providing valid subscription plans.

10. Yazılım Uyumluluk Testi

Device implementations MUST pass all tests described in this section. However, note that no software test package is fully comprehensive. For this reason, device implementers are STRONGLY RECOMMENDED to make the minimum number of changes as possible to the reference and preferred implementation of Android available from the Android Open Source Project. This will minimize the risk of introducing bugs that create incompatibilities requiring rework and potential device updates.

10.1. Uyumluluk Test Paketi

Cihaz uygulamaları:

  • [C-0-1] MUST pass the Android Compatibility Test Suite (CTS) available from the Android Open Source Project, using the final shipping software on the device.

  • [C-0-2] MUST ensure compatibility in cases of ambiguity in CTS and for any reimplementations of parts of the reference source code.

CTS gerçek bir cihazda çalıştırılacak şekilde tasarlanmıştır. Herhangi bir yazılım gibi, CTS'nin kendisi de hatalar içerebilir. The CTS will be versioned independently of this Compatibility Definition, and multiple revisions of the CTS may be released for Android 9.

Cihaz uygulamaları:

  • [C-0-3] MUST pass the latest CTS version available at the time the device software is completed.

  • SHOULD use the reference implementation in the Android Open Source tree as much as possible.

10.2. CTS Doğrulayıcı

The CTS Verifier is included with the Compatibility Test Suite, and is intended to be run by a human operator to test functionality that cannot be tested by an automated system, such as correct functioning of a camera and sensors.

Cihaz uygulamaları:

  • [C-0-1] MUST correctly execute all applicable cases in the CTS verifier.

The CTS Verifier has tests for many kinds of hardware, including some hardware that is optional.

Cihaz uygulamaları:

  • [C-0-2] MUST pass all tests for hardware that they possess; for instance, if a device possesses an accelerometer, it MUST correctly execute the Accelerometer test case in the CTS Verifier.

Test cases for features noted as optional by this Compatibility Definition Document MAY be skipped or omitted.

  • [C-0-2] Every device and every build MUST correctly run the CTS Verifier, as noted above. However, since many builds are very similar, device implementers are not expected to explicitly run the CTS Verifier on builds that differ only in trivial ways. Specifically, device implementations that differ from an implementation that has passed the CTS Verifier only by the set of included locales, branding, etc. MAY omit the CTS Verifier test.

11. Güncellenebilir Yazılım

  • [C-0-1] Device implementations MUST include a mechanism to replace the entirety of the system software. The mechanism need not perform “live” upgrades—that is, a device restart MAY be required. Cihaza önceden yüklenmiş yazılımın tamamının yerine geçebilecek herhangi bir yöntem kullanılabilir. Örneğin, aşağıdaki yaklaşımlardan herhangi biri bu gereksinimi karşılayacaktır:

    • “Over-the-air (OTA)” downloads with offline update via reboot.
    • “Tethered” updates over USB from a host PC.
    • “Offline” updates via a reboot and update from a file on removable storage.
  • [C-0-2] The update mechanism used MUST support updates without wiping user data. That is, the update mechanism MUST preserve application private data and application shared data. Yukarı akışlı Android yazılımının bu gereksinimi karşılayan bir güncelleme mekanizması içerdiğini unutmayın.

If the device implementations includes support for an unmetered data connection such as 802.11 or Bluetooth PAN (Personal Area Network) profile, then, they:

  • [C-1-1] MUST support OTA downloads with offline update via reboot.

For device implementations that are launching with Android 6.0 and later, the update mechanism SHOULD support verifying that the system image is binary identical to expected result following an OTA. The block-based OTA implementation in the upstream Android Open Source Project, added since Android 5.1, satisfies this requirement.

Also, device implementations SHOULD support A/B system updates . The AOSP implements this feature using the boot control HAL.

If an error is found in a device implementation after it has been released but within its reasonable product lifetime that is determined in consultation with the Android Compatibility Team to affect the compatibility of third-party applications, then:

  • [C-2-1] The device implementer MUST correct the error via a software update available that can be applied per the mechanism just described.

Android includes features that allow the Device Owner app (if present) to control the installation of system updates. If the system update subsystem for devices report android.software.device_admin then, they:

12. Belge Değişiklik Günlüğü

For a summary of changes to the Compatibility Definition in this release:

For a summary of changes to individuals sections:

  1. giriiş
  2. Device Types
  3. Yazılım
  4. Application Packaging
  5. Multimedya
  6. Developer Tools and Options
  7. Hardware Compatibility
  8. Performans ve Güç
  9. Güvenlik Modeli
  10. Software Compatibility Testing
  11. Updatable Software
  12. Document Changelog
  13. Bize Ulaşın

12.1. Changelog Viewing Tips

Changes are marked as follows:

  • CDD
    Substantive changes to the compatibility requirements.

  • Dokümanlar
    Cosmetic or build related changes.

For best viewing, append the pretty=full and no-merges URL parameters to your changelog URLs.

13. Bize Ulaşın

You can join the android-compatibility forum and ask for clarifications or bring up any issues that you think the document does not cover.