बैकग्राउंडडिवाइसएक्शन | किसी दिए गए डिवाइस पर कार्रवाई रद्द होने तक आवश्यकतानुसार दोहराते हुए एक आदेश चलाता है। |
बेसडिवाइसमैट्रिककलेक्टर | IMetricCollector का आधार कार्यान्वयन जो onTestRunStart(com.android.tradefed.device.metric.DeviceMetricData) और ERROR(/#onTestRunEnd(com.android.tradefed.device.metric.DeviceMetricData,Map)) पर संग्रह शुरू और बंद करने की अनुमति देता है। |
बेसएम्यूलेटर प्रिपेरर | स्थानीय एमुलेटर लॉन्च करने के लिए सामान्य तैयारी। |
बेसहोस्टजुनीट4टेस्ट | होस्ट JUnit4 स्टाइल टेस्ट चलाने के लिए बेस टेस्ट क्लास। |
बेसलेवल लॉगआउटपुट | ILeveledLogOutput के लिए एक आधार कार्यान्वयन जो कुछ टैग को उनके नाम या घटकों के आधार पर फ़िल्टर करने की अनुमति देता है। |
बेसमॉड्यूलकंट्रोलर | IModuleController का मूल कार्यान्वयन जिसे यह जांचने के लिए लागू किया जाना चाहिए कि कोई मॉड्यूल चलना चाहिए या नहीं। |
बेसमल्टी टारगेट प्रिपेरर | IMultiTargetPreparer का आधार कार्यान्वयन जो ऑब्जेक्ट को अक्षम करने की अनुमति देता है। |
बेसपोस्टप्रोसेसर | आधार IPostProcessor जिसे प्रत्येक कार्यान्वयन का विस्तार करना चाहिए। |
बेसरेट्रीनिर्णय | IRetryDecision का आधार कार्यान्वयन। |
बेसस्ट्रीम लॉगर <OS आउटपुटस्ट्रीम बढ़ाता है> | एक ILeveledLogOutput जो लॉग संदेशों को आउटपुट स्ट्रीम और stdout पर निर्देशित करता है। |
बेसटार्गेटप्रेपरर | ITargetPreparer के लिए आधार कार्यान्वयन वर्ग जो यह नियंत्रित करने की अनुमति देता है कि वस्तु अक्षम है या नहीं। |
बेसटेस्टसूट | नए सुइट सिस्टम के साथ संगतता परीक्षण सूट चलाने के लिए एक परीक्षण। |
बैटरी नियंत्रक | उपयोगिता वर्ग जो किसी डिवाइस की बैटरी चार्जिंग स्थिति को नियंत्रित करने की अनुमति देता है। |
बैटरी रिचार्जडिवाइस रिकवरी | जब डिवाइस का बैटरी स्तर किसी दिए गए थ्रेशोल्ड के नीचे चला जाता है, तो कमांड को ट्रिगर करने की अनुमति दें। |
बैटरीतापमान | |
बैटरी उपलब्ध नहीं हैडिवाइस रिकवरी | रिकवरी चेकर जो बैटरी स्तर उपलब्ध नहीं होने पर कॉन्फ़िगरेशन को ट्रिगर करेगा। |
बिफोरक्लासविथइन्फो | पहले क्लास के समान गारंटी लेकिन एनोटेट की गई विधि के लिए BeforeClass पैरामीटर की आवश्यकता TestInformation चाहिए। |
बाइनरी स्टेट | Enum IGNORE नो-ऑप स्टेट के साथ ON/OFF स्टेट रिकॉर्ड करता था। |
ब्लूटूथकनेक्शनलेटेंसीकलेक्टर | संग्राहक उपकरणों के लिए एक पूर्व-निर्धारित statsd अवधि मीट्रिक कॉन्फ़िगरेशन को पुश करेगा और प्रत्येक प्रोफ़ाइल के लिए ब्लूटूथ कनेक्शन अवधि एकत्र करेगा। |
ब्लूटूथकनेक्शनस्टेटकलेक्टर | यह संग्राहक प्रत्येक प्रोफ़ाइल के लिए BluetoothConnectionStateChanged मेट्रिक और रिकॉर्ड कनेक्शन स्थिति संख्या एकत्र करेगा। |
BluetoothConnectionSuccessRatePostProcessor | पोस्टप्रोसेसर का कार्यान्वयन जो एक ब्लूटूथ प्रोफ़ाइल के लिए सफलता दर की गणना करता है संख्यात्मक सरणी में ब्लूटूथ कनेक्शन स्थिति वाले मीट्रिक निर्दिष्ट करने के लिए "मीट्रिक-की-मैच" का उपयोग करें उदाहरण [0, 1, 2, 3, 0, 1, 2, 3]। |
ब्लूटूथ यूटिल्स | डिवाइस पर ब्लूटूथ इंस्ट्रुमेंटेशन को कॉल करने के लिए उपयोगिता कार्य डिवाइस साइड ब्लूटूथ इंस्ट्रुमेंटेशन कोड एओएसपी में यहां पाया जा सकता है: frameworks/base/core/tests/bluetoothtests |
बूटस्ट्रैपबिल्डप्रोवाइडर | एक IDeviceBuildProvider जो बूटस्ट्रैप परीक्षण डिवाइस से जानकारी बनाता है यह आमतौर पर बाहरी रूप से आपूर्ति किए गए निर्माण वाले उपकरणों के लिए उपयोग किया जाता है, अर्थात |
BootstrapServiceFileResolverLoader | सर्विस लोडिंग सुविधा का उपयोग कर रिज़ॉल्वर लोड करता है। |
बग रिपोर्ट | बग्रेपोर्ट फ़ाइलों के संदर्भ रखने वाली वस्तु, फ्लैट बग्रेपोर्ट और ज़िप्ड बग्रेपोर्ट (बग्रेपोर्ट्ज़) के संगत। |
बुग्रेपोर्टकलेक्टर | एक पास-थ्रू ITestInvocationListener जो कॉन्फ़िगर करने योग्य ईवेंट होने पर बग रिपोर्ट एकत्र करता है और फिर प्रत्येक बग्रेपोर्ट एकत्र होने के बाद अपने बच्चों पर ITestInvocationListener#testLog को कॉल करता है। |
बुग्रेपोर्टकलेक्टर.फ़िल्टर | |
बुग्रेपोर्टकलेक्टर.फ्रीक | |
बुग्रेपोर्टकलेक्टर.संज्ञा | |
बुग्रेपोर्ट कलेक्टर। विधेय | एक बग्रेपोर्ट को कब कैप्चर करना है, इसका वर्णन करने वाला एक पूर्ण विधेय। |
बगरेपोर्टकलेक्टर।संबंध | |
BugreportCollector.SubPredicate | |
BugreportzOnFailureCollector | परीक्षण केस के विफल होने पर बग्रेपोर्ट्ज़ लीजिए। |
BugreportzOnTestCaseFailureCollector | जब एक रन में एक परीक्षण केस विफल हो जाता है, तो एक बग्रेपोर्टज़ लीजिए। |
बिल्ड एरर | यदि प्रदान किया गया बिल्ड चलने में विफल रहता है तो उसे फेंक दिया जाता है। |
बिल्डइन्फो | ITestDevice का सामान्य कार्यान्वयन जिसे IBuildInfo से जोड़ा जाना चाहिए। |
बिल्डइन्फोकी | सूचना प्रश्नों के निर्माण से संबंधित क्लास होल्डिंग एन्यूमरेशन। |
BuildInfoKey.BuildInfoFileKey | Enum सभी ज्ञात फ़ाइल प्रकारों का वर्णन करता है जिन्हें IBuildInfo.getFile(com.android.tradefed.build.BuildInfoKey.BuildInfoFileKey) के माध्यम से पूछताछ की जा सकती है। |
BuildInfoRecorder | एक ITargetPreparer जो एक निर्दिष्ट फ़ाइल में जानकारी मेटा डेटा लिखता है। |
BuildInfoUtil | IBuildInfo में हेरफेर करने में मदद करने के लिए एक उपयोग वर्ग |
बिल्ड पुनर्प्राप्ति त्रुटि | परीक्षण के लिए बिल्ड पुनर्प्राप्त करते समय एक गंभीर त्रुटि उत्पन्न हुई। |
BuildSerializedVersion | कक्षा जिसमें सभी IBuildInfo का वर्तमान क्रमांकन संस्करण शामिल है। |
BuildTestsZipUtils | एंड्रॉइड बिल्ड सिस्टम द्वारा उत्पन्न परीक्षण ज़िप से संबंधित संचालन के लिए एक सहायक वर्ग |
बल्कईमेलर | एक ईमेल प्रेषक उपयोगिता जो निम्नलिखित कॉन्फ़िगरेशन की अनुमति देती है: भेजा गया अंतराल, प्रारंभिक बर्स्ट आकार, प्राप्तकर्ता और कुल संख्या संदेश। |
बंडलटूलउपयोग | उपयोगिता वर्ग जो deivce पर .apks स्थापित करने के लिए बंडलटूल कमांड लाइन का उपयोग करता है। |
ByteArrayInputStreamSource | |
बाइटअरेलिस्ट | एक हल्के बाइट सरणी का प्रतिनिधित्व करने के लिए एक वर्ग। |
ByteArrayUtil | बाइट सरणी पर काम करने के लिए उपयोगिताएँ, जैसे, बाइट्स को पूर्णांक में बदलना। |
DebugHostLogOnFailureCollector | कलेक्टर जो टेस्ट केस की विफलता होने पर होस्ट-साइड लॉग को इकट्ठा करेगा और लॉग करेगा। |
DefaultRemoteAndroidTestRunner | ट्रेडफेड उपयोग के मामलों के लिए कुछ डिफ़ॉल्ट सेट करने के लिए ddmlib RemoteAndroidTestRunner का विस्तार। |
DefaultTestsZipInstaller | परीक्षण ज़िप इंस्टॉलर का डिफ़ॉल्ट कार्यान्वयन। |
प्रत्यायोजित आमंत्रण निष्पादन | आमंत्रण निष्पादन जो निष्पादन को किसी अन्य InvocationExecution बाइनरी को सौंपता है। |
निर्भरता समाधानकर्ता | एक नए प्रकार का प्रदाता जो परीक्षण के लिए सभी निर्भरताएँ प्राप्त करने की अनुमति देता है। |
डिवाइस आवंटन परिणाम | एक आदेश के लिए आवंटन प्रयास के परिणामों का प्रतिनिधित्व करता है। |
डिवाइस आवंटन स्थिति | IDeviceManager के दृष्टिकोण से डिवाइस की आवंटन स्थिति का प्रतिनिधित्व करता है |
डिवाइस उपलब्ध चेकर | यह सुनिश्चित करने के लिए चेकर कि कोई मॉड्यूल डिवाइस को ऑफ़लाइन स्थिति में नहीं छोड़ता है। |
डिवाइसबेसलाइन चेकर | प्रत्येक मॉड्यूल से पहले डिवाइस बेसलाइन सेटिंग्स सेट करें। |
डिवाइसबेसलाइनसेटर | डिवाइस बेसलाइन सेटिंग बनाने के लिए एब्सट्रैक्ट क्लास का इस्तेमाल किया जाता है। |
डिवाइस बैटरी लेवल चेकर | एक IRemoteTest जो न्यूनतम बैटरी चार्ज की जांच करता है, और न्यूनतम चार्ज मौजूद नहीं होने पर बैटरी के दूसरे चार्जिंग थ्रेशोल्ड तक पहुंचने की प्रतीक्षा करता है। |
DeviceBatteryResourceMetricCollector | यह संग्राहक डिवाइस बैटरी मेट्रिक्स एकत्र करता है। |
डिवाइसबिल्ड डिस्क्रिप्टर | IBuildInfo के लिए एक रैपर वर्ग, जिसमें डिवाइस प्लेटफ़ॉर्म निर्माण जानकारी पुनर्प्राप्त करने के लिए सहायक विधियां शामिल हैं। |
डिवाइसबिल्डइन्फो | एक IBuildInfo जो एक संपूर्ण Android डिवाइस बिल्ड और (वैकल्पिक रूप से) इसके परीक्षणों का प्रतिनिधित्व करता है। |
DeviceBuildInfoBootStrapper | एक ITargetPreparer जो डिवाइस से पढ़ी गई विशेषताओं के साथ जानकारी फ़ील्ड बनाने की जगह लेता है यह बाहरी स्रोत से उत्पन्न बिल्ड वाले उपकरणों के परीक्षण के लिए उपयोगी है (जैसे |
DeviceBuildInfoInjector | एक ITargetPreparer जो DeviceBuildDescriptor मेटाडेटा को IBuildInfo में सम्मिलित करता है। |
डिवाइस क्लीनर | परीक्षण के बाद रीबूट या क्लीनअप क्रिया के रूप में प्रारूपित करता है, और वैकल्पिक रूप से स्क्रीन को बंद कर देता है |
DeviceCleaner.Cleanupकार्रवाई | |
DeviceCleaner.PostCleanupAction | |
डिवाइससमवर्तीउपयोग | समवर्ती डिवाइस साइड कमांड निष्पादन के लिए उपयोगिता विधियों और कक्षाएं शामिल हैं ShellCommandCallable के रूप में कार्यान्वित आदेशों को चलाने के लिए ERROR(/ExecutorService ERROR(/ExecutorService) का उपयोग करें, और ERROR(/ExecutorService) द्वारा दिए गए ERROR(/ExecutorService) द्वारा दिए गए अनुसार सिंक्रनाइज़ेशन के लिए ERROR(/Future) ERROR(/#joinFuture(String,Future,long)) का उपयोग करें। |
DeviceConcurrentUtil.ShellCommandCallable <V> | एक ERROR(/Callable) जो एक ITestDevice पर शेल कमांड निष्पादित करने के विवरण को लपेटता है। |
डिवाइसकॉन्फ़िगरेशनहोल्डर | एक ठोस IDeviceConfiguration कार्यान्वयन जो लोड किए गए डिवाइस कॉन्फ़िगरेशन ऑब्जेक्ट को उसकी विशेषताओं में संग्रहीत करता है। |
डिवाइस डिस्क्रिप्टर | परीक्षण के तहत डिवाइस का वर्णन करने वाली जानकारी युक्त एक वर्ग। |
डिवाइसडिस्कनेक्टेडअपवाद | जब कोई उपकरण अपने परिवहन प्रकार के माध्यम से पहुंच योग्य नहीं रह जाता है, तो फेंक दिया जाता है, उदाहरण के लिए यदि डिवाइस अब यूएसबी, या टीसीपी/आईपी कनेक्शन के माध्यम से दिखाई नहीं दे रहा है |
डिवाइस त्रुटि पहचानकर्ता | डिवाइस त्रुटियों से त्रुटि पहचानकर्ता और डिवाइस ने त्रुटियों की सूचना दी। |
DeviceFailedToBootError | यदि कोई डिवाइस किसी बिल्ड के साथ फ्लैश होने के बाद बूट करने में विफल रहता है तो उसे फेंक दिया जाता है। |
DeviceFeatureModuleController | एक मॉड्यूल नियंत्रक परीक्षण नहीं चलाने के लिए जब यह कुछ सुविधा का समर्थन नहीं करता है। |
डिवाइसफाइल रिपोर्टर | एक उपयोगिता वर्ग जो फाइलों के लिए डिवाइस की जांच करता है और यदि पाया जाता है तो उन्हें ITestInvocationListener#testLog(String, LogDataType, InputStreamSource) पर भेजता है। |
डिवाइसफ्लैशप्रेपरर | एक ITargetPreparer जो भौतिक Android हार्डवेयर पर एक छवि को फ्लैश करता है। |
डिवाइस फोल्डेबल स्टेट | डिवाइस फोल्डेबल स्थिति का प्रतिनिधित्व जैसा कि "cmd device_state प्रिंट-स्टेट्स" द्वारा लौटाया गया है। |
DeviceFolderBuildInfo | एक IDeviceBuildInfo जिसमें स्थानीय फाइल सिस्टम पर निर्देशिका में निहित अन्य बिल्ड आर्टिफैक्ट भी शामिल हैं। |
DeviceImageZipFlashingTargetPreparer | एक लक्ष्य तैयारकर्ता जो एक विशिष्ट प्रारूप के माध्यम से प्रदान की गई डिवाइस छवियों के साथ डिवाइस को फ्लैश करता है। |
डिवाइसइंटरनेट एक्सेसिबिलिटीरिसोर्समैट्रिककलेक्टर | कलेक्टर यह जांचने के लिए google.com को पिंग करता है कि डिवाइस में इंटरनेट एक्सेसिबिलिटी है या नहीं। |
DeviceJUnit4ClassRunner | JUnit4 परीक्षण धावक जो IDeviceTest को भी समायोजित करता है। |
DeviceJUnit4ClassRunner.LogAnnotation | पत्रकारों को लॉग ले जाने के लिए नकली एनोटेशन का मतलब है। |
DeviceJUnit4ClassRunner.MetricAnnotation | पत्रकारों तक मेट्रिक्स ले जाने के लिए नकली एनोटेशन का मतलब है। |
DeviceJUnit4ClassRunner.TestLogData | ExternalResource संसाधन और TestRule का कार्यान्वयन। |
DeviceJUnit4ClassRunner.TestMetrics | ExternalResource संसाधन और TestRule का कार्यान्वयन। |
DeviceJUnit4ClassRunnerBuilder | एक RunnerBuilder जो DeviceJUnit4ClassRunner s की आपूर्ति करता है, विशेष रूप से ERROR(LongevitySuite/android.host.test.longevity.LongevitySuite LongevitySuite) और LongevityHostRunner के लिए धावकों की आपूर्ति के लिए उपयोग किया जाता है। |
डिवाइस प्रबंधनजीआरपीसीसर्वर | जीआरपीसी सर्वर ट्रेडफेड से एक उपकरण आरक्षित करने की अनुमति देता है। |
डिवाइस मैनेजर | |
DeviceManager.FastbootDevice | फास्टबूट मोड में डिवाइस का प्रतिनिधित्व। |
डिवाइसमेट्रिकडेटा | मीट्रिक संग्राहकों द्वारा एकत्र किए गए सभी डेटा को रखने पर आपत्ति। |
डिवाइस मॉनिटर मल्टीप्लेक्सर | एकाधिक IDeviceMonitor s के अनुरोधों को प्रचारित करने के लिए एक प्रॉक्सी वर्ग। |
डिवाइस उपलब्ध नहीं हैअपवाद | जब कोई उपकरण परीक्षण के लिए उपलब्ध नहीं होता है तो फेंक दिया जाता है। |
DeviceOwnerTargetPreparer | एक ITargetPreparer जो डिवाइस स्वामी घटक सेट करता है। |
डिवाइसपैरामीटरेटेड रनर | होस्ट-साइड संचालित पैरामीटरयुक्त परीक्षणों के लिए JUnit4 शैली पैरामीटरयुक्त धावक। |
डिवाइस गुण | डिवाइस साइड प्रॉपर्टी नामों के लिए सामान्य स्थिर परिभाषाएं |
DeviceRecoveryModeUtil | |
डिवाइस रिलीज रिपोर्टर | डिवाइस रिलीज़ रिपोर्टर जो रिलीज़ किए जाने वाले डिवाइस (डिवाइस) की मूल प्रक्रिया के साथ संचार करता है। |
डिवाइस रीसेट फ़ीचर | डिवाइस रीसेट का सर्वर साइड कार्यान्वयन। |
डिवाइस रीसेटहैंडलर | यूटिलिटी हैंडलिंग सामान्य रूप से डिवाइस रीसेट करना। |
डिवाइस रनटाइम अपवाद | जब डिवाइस कार्रवाई अपेक्षित परिणाम नहीं देती है तो फेंक दिया जाता है। |
डिवाइस चयन विकल्प | डिवाइस चयन मानदंड के लिए कंटेनर। |
DeviceSelectionOptions.DeviceRequestedType | विभिन्न संभावित प्रकार के प्लेसहोल्डर डिवाइस समर्थित हैं। |
डिवाइस सेटिंग चेकर | जांचें कि मॉड्यूल चलाने के दौरान डिवाइस सेटिंग्स बदल गई हैं या नहीं। |
डिवाइस सेटअप | एक ITargetPreparer जो प्रदान किए गए Option के आधार पर परीक्षण के लिए एक उपकरण को कॉन्फ़िगर करता है। |
डिवाइसस्टेटमॉनिटर | एक IDevice की स्थिति की निगरानी के लिए सहायक वर्ग। |
DeviceStorageAgeResourceMetricCollector | लॉगकैट से पार्स स्टोरेज उम्र। |
डिवाइस स्टोरेज फिलर | भंडारण को भरने के लिए लक्ष्य तैयारकर्ता ताकि कुछ मात्रा में खाली स्थान उपलब्ध हो। |
डिवाइस स्टोरेज स्टेटस चेकर | जांचें कि क्या डिवाइस में दिए गए विभाजन के लिए पर्याप्त डिस्क स्थान है। |
डिवाइसस्ट्रिंगपुशर | फ़ाइल में एक स्ट्रिंग लिखने के लिए लक्ष्य तैयारकर्ता। |
डिवाइससूट | JUnit4 कंटेनर Suite का विस्तार करता है ताकि आवश्यक परीक्षणों के लिए ITestDevice प्रदान किया जा सके। |
डिवाइस टेस्टकेस | हेल्पर जुनीट टेस्ट केस जो IRemoteTest और IDeviceTest सेवाएं प्रदान करता है। |
डिवाइस परीक्षण परिणाम | TestResult की एक विशेषज्ञता जो DeviceNotAvailableException होने पर निरस्त हो जाएगी |
DeviceTestResult.RuntimeDeviceNotAvailableException | |
DeviceTestRunOptions | BaseHostJUnit4Test के माध्यम से चल रहे डिवाइस परीक्षण से संबंधित विकल्पों के लिए एक बिल्डर वर्ग। |
डिवाइसटेस्टसूट | हेल्पर जुनीट टेस्ट सूट जो IRemoteTest और IDeviceTest सेवाएं प्रदान करता है। |
डिवाइस अनुपलब्ध मॉनिटर | यह श्रोता केवल परीक्षण केस स्तर DNAE को पकड़ने का प्रयास करता है। |
डिवाइस अनुत्तरदायी अपवाद | DeviceNotAvailableException का एक विशेषज्ञता जो इंगित करता है कि डिवाइस एडीबी के लिए दृश्यमान है, लेकिन अनुत्तरदायी है (यानी, कमांड टाइम आउट, बूट नहीं होगा, आदि) |
DeviceUpdateTargetPreparer | एक अमूर्त ITargetPreparer जो बाहरी स्रोत (बिल्ड सेवा के विपरीत) से डिवाइस छवि फ़ाइल के साथ डिवाइस को अपडेट करने के सामान्य चरणों का ख्याल रखता है। |
DeviceWifiResourceMetricCollector | कलेक्टर वर्तमान कनेक्टेड वाईफाई सिग्नल की शक्ति और लिंक स्पीड मेट्रिक्स एकत्र करता है। |
डिवाइसवाइपर | एक ITargetPreparer जो उपयोगकर्ता डेटा को मिटा देता है |
डायरेक्टेडग्राफ <वी> | एक निर्देशित अभारित रेखांकन कार्यान्वयन। |
अक्षम करेंSELinuxTargetPreparer | लक्ष्य तैयारकर्ता जो सक्षम होने पर SELinux को निष्क्रिय कर देता है। |
ड्राईरनकीस्टोर | ड्राई-रन के लिए एक कीस्टोर जहां किसी भी कीस्टोर वैल्यू को हमेशा ठीक से बदला और पाया जाता है। |
ड्राई रनर | वास्तव में उन्हें निष्पादित करने के बजाय पारदर्शी रूप से सूखा परीक्षण चलाता है। |
डायनामिकफाइलस्टबटेस्ट | यह परीक्षण करने के लिए एक ट्रेडफेड परीक्षण है कि ट्रेडफेड डायनेमिक फ़ाइल को सही ढंग से हल कर सकता है। |
डायनामिक रिमोटफाइल रिसोल्वर | कक्षा जो दूरस्थ फ़ाइलों के पथ को हल करने में मदद करती है। |
DynamicRemoteFileResolver.FileResolverLoader | IRemoteFileResolver के कार्यान्वयन को लोड करता है। |
डायनेमिक सिस्टम प्रिपेरर | एक ITargetPreparer जो डायनामिक सिस्टम अपडेट के साथ डिवाइस के शीर्ष पर एक सिस्टम इमेज सेट करता है। |
आईएबीआई | परीक्षण के तहत एबीआई का प्रतिनिधित्व करने वाला इंटरफ़ेस। |
आईएबीआई रिसीवर | एक परीक्षण जिसे परीक्षण के तहत ABI की आवश्यकता होती है। |
मैंएंड्रॉइडडीबगब्रिज | Interface definition for AndroidDebugBridge methods used in this package. |
IAppBuildInfo | This interface is deprecated. Use IBuildInfo directly. |
IAutoRetriableTest | Interface for an IRemoteTest that doesn't implement ITestFilterReceiver but still wishes to support auto-retry. |
IBatteryInfo | The interface defining the interaction with a battery of a device. |
IBatteryInfo.BatteryState | Describes the current battery charging state. |
IBuildInfo | Holds information about the build under test. |
IBuildInfo.BuildInfoProperties | Some properties that a IBuildInfo can have to tweak some handling of it. |
IBuildProvider | Responsible for providing info regarding the build under test. |
IBuildReceiver | A test that needs reference to the build under test. |
IClusterClient | An interface for interacting with the TFC backend. |
IClusterEvent | Interface for any cluster event to be uploaded to TFC. |
IClusterEventUploader <T extends IClusterEvent > | Interface for ClusterEventUploader |
IClusterOptions | क्लस्टर से संबंधित विकल्प प्राप्त करने के लिए एक इंटरफ़ेस। |
ICommandOptions | Container for execution options for commands. |
ICommandScheduler | A scheduler for running TradeFederation commands. |
ICommandScheduler.IScheduledInvocationListener | Listener for invocation events when invocation completes. |
ICompressionStrategy | An interface representing a compression algorithm that can be selected at runtime. |
IConfigOptionValueTransformer | An interface for manipulating config option value |
IConfigurableVirtualDevice | An interface to provide information about a possibly preconfigured virtual device info (host ip, host user, ports offset and etc.). |
IConfiguration | Configuration information for a TradeFederation invocation. |
IConfigurationFactory | Factory for creating IConfiguration s |
IConfigurationReceiver | Simple interface to represent object that accepts an IConfiguration . |
IConfigurationServer | कॉन्फ़िगरेशन सर्वर के लिए एक इंटरफ़ेस। |
ICredentialFactory | An interface for credential factory to create oauth2 Credential . |
IDefaultObjectLoader | Interface for loading the default objects that should be part of our YAML configuration. |
IDefaultObjectLoader.LoaderConfiguration | The loading configuration object to pass information to the loader. |
IDeviceBuildInfo | एक IBuildInfo जो एक संपूर्ण Android डिवाइस बिल्ड और (वैकल्पिक रूप से) इसके परीक्षणों का प्रतिनिधित्व करता है। |
IDeviceBuildProvider | A IBuildProvider that uses information from a ITestDevice to retrieve a build. |
IDeviceConfiguration | डिवाइस कॉन्फ़िगरेशन धारक इंटरफ़ेस। |
IDeviceFlasher | Flashes a device image on a device. |
IDeviceFlasher.UserDataFlashOption | Enum of options for handling the userdata image |
IDeviceManager | Interface for managing the set of available devices for testing. |
IDeviceManager.IFastbootListener | A listener for fastboot state changes. |
IDeviceMonitor | Interface for monitoring state of devices. |
IDeviceMonitor.DeviceLister | A Runnable -like class that should return the known devices and their states. |
IDeviceRecovery | Interface for recovering a device that has gone offline. |
IDeviceSelection | Interface for device selection criteria. |
IDeviceStateMonitor | Provides facilities for monitoring the state of a IDevice . |
IDeviceTest | Interface for object that needs a reference to a ITestDevice . |
IDisableable | Interface that describes a Tradefed object that can be disabled. |
IEmail | Interface for sending email. |
IEmail.Message | Container for email message data. |
IFileDownloader | Interface for downloading a remote file. |
IFileEntry | इंटरफ़ेस परिभाषा जो FileEntry विधियों को सरल, नकली अनुबंध प्रदान करती है। |
IFileResolverLoader | Loads implementations of IRemoteFileResolver . |
IFileResolverLoader.ResolverLoadingException | यदि कोई रिज़ॉल्वर लोड या इनिशियलाइज़ नहीं किया जा सकता है तो अपवाद को फेंक दिया जाता है। |
IFlashingResourcesParser | Interface for providing required versions of auxiliary image files needed to flash a device. |
IFlashingResourcesRetriever | Interface for retrieving auxiliary image files needed to flash a device. |
IFolderBuildInfo | A simple abstract IBuildInfo whose build artifacts are containing in a local filesystem directory. |
IFormatterGenerator | SuiteResultHolder के लिए एक फ़ॉर्मेटर का वर्णन करने वाला इंटरफ़ेस। |
IGlobalConfiguration | A class to encompass global configuration information for a single Trade Federation instance (encompassing any number of invocations of actual configurations). |
IHarnessException | Description of the harness exception interface that will be implemented by harness exceptions. |
IHostCleaner | Cleans up the host after the test run has finished. |
IHostHealthAgent | An interface to emit host or device metrics. |
IHostMonitor | Interface to dispatch host data |
IHostMonitor.HostDataPoint | Generic class for data to be reported. |
IHostMonitor.HostMetricType | |
IHostOptions | Host options holder interface. |
IHostOptions.PermitLimitType | Enum describing the possible permit limiters |
IHostResourceManager | Interface to manager host resource. |
IHttpHelper | Helper methods for performing http requests. |
IHttpHelper.DataSizeException | |
Iइनवोकेशनसंदर्भ | यदि आवश्यक हो तो परीक्षणों तक पहुंचने के लिए आमंत्रण के बारे में जानकारी रखता है। |
IInvocationContext.TimeingEvent | |
IInvocationContextReceiver | A test that needs reference to the context of the invocation. |
Iआमंत्रण निष्पादन | एक आमंत्रण के हिस्से के रूप में की जाने वाली क्रियाओं का वर्णन करने वाला इंटरफ़ेस। |
IKeyStoreClient | Interface to access a key store for password or sensitive data. |
IKeyStoreFactory | Factory for creating IKeyStoreClient . |
ILabPreparer | Marker interface for lab preparers See ITargetPreparer for a description of what these interfaces are intended. |
ILeveledLogOutput | इस इंटरफ़ेस को लागू करने वाली कक्षाएं लॉग संदेशों को आउटपुट करने के तरीके प्रदान करती हैं। |
ILogcatReceiver | A class that provides the output of a device's logcat as an InputStreamSource . |
ILogRegistry | An interface for a ILogOutput singleton logger that multiplexes and manages different loggers. |
ILogRegistry.EventType | Events that are useful to be logged |
ILogSaver | Classes which implement this interface provide methods for storing logs to a central location. |
ILogSaverListener | Allows for ITestInvocationListener s to listen for when log files are saved. |
IManagedTestDevice | A ITestDevice whose lifecycle is managed. |
IManagedTestDevice.DeviceEventResponse | Container for a response to a IManagedTestDevice#handleAllocationEvent(DeviceEvent) call |
IManagedTestDeviceFactory | Creator interface for IManagedTestDevice s |
आईमेट्रिक कलेक्टर | इस इंटरफ़ेस को डेकोरेटर के रूप में तब जोड़ा जाएगा जब रिपोर्टिंग परीक्षण के परिणाम मिलते-जुलते मीट्रिक एकत्र करने के लिए होंगे। |
आईमेट्रिक कलेक्टर रिसीवर | IRemoteTest को लागू करने के लिए इंटरफ़ेस यदि उन्हें परीक्षण चलाने के लिए IMetricCollector s की सूची प्राप्त करने की आवश्यकता है। |
IMoblyYamlResultHandler | Interface of mobly yaml result handler. |
IMoblyYamlResultHandler.ITestResult | Interface of mobly yaml result |
IModuleController | Interface for controlling if a module should be executed or not. |
IModuleController.RunStrategy | Enum describing how the module should be executed. |
IModuleParameterHandler | The interface for parameters of suites modules. |
IMultiDeviceRecovery | Interface for recovering multiple offline devices. |
IMultiDeviceTest | This interface is deprecated. This interface is kept temporarily for compatibility but is not actually used anymore. Please do not implement it. |
IMultiTargetPreparer | Prepares the test environment for several devices together. |
INativeDevice | Provides an reliable and slightly higher level API to a ddmlib IDevice . |
INativeDeviceTest | Interface for object that needs a reference to a INativeDevice . |
InfraErrorIdentifier | Error Identifiers from Trade Federation infra, and dependent infra (like Build infra). |
InputStreamSource | This interface basically wraps an ERROR(/InputStream) to make it clonable. |
InstallAllTestZipAppsSetup | A ITargetPreparer that installs all apps in a test zip. |
InstallApexModuleTargetPreparer | |
InstallApkSetup | A ITargetPreparer that installs one or more apks located on the filesystem. |
InstallBuildEnvApkSetup | A ITargetPreparer that installs one or more test apks from an Android platform build env. |
InstalledInstrumentationsTest | Runs all instrumentation found on current device. |
InstantAppHandler | Handler for ModuleParameters#INSTANT_APP . |
InstrumentationPreparer | A ITargetPreparer that runs instrumentation |
InstrumentationTest | A Test that runs an instrumentation test package on given device. |
आह्वान प्रसंग | IInvocationContext का सामान्य कार्यान्वयन। |
आह्वान निष्पादन | कक्षा जो सभी आमंत्रण चरणों का वर्णन करती है: डाउनलोड करें, target_prep बनाएं, परीक्षण चलाएं, साफ़ करें। |
InvocationLocal <T> | This class provides invocation-scope variables. |
InvocationMetricLogger | A utility class for an invocation to log some metrics. |
InvocationMetricLogger.InvocationGroupMetricKey | Grouping allows to log several groups under a same key. |
InvocationMetricLogger.InvocationMetricKey | Some special named key that we will always populate for the invocation. |
InvocationStatus | A class to store invocation status. |
InvocationStatus | A helper enum to represent the invocation status |
InvocationSummaryHelper | Helper class for gathering and reporting TestSummary for set of listeners |
InvocationToJUnitResultForwarder | A class that listens to ITestInvocationListener events and forwards them to a TestListener . |
IPostProcessor | Post processors is a Trade Federation object meant to allow the processing of metrics and logs AFTER the tests and BEFORE result reporting. |
IRemoteFeature | Interface describing a feature in Tradefed that can be executed based on the request. |
IRemoteFileResolver | Interface for objects that can resolve a remote file into a local one. |
IRemoteFileResolver.RemoteFileResolverArgs | The args passed to the resolvers |
IRemoteFileResolver.ResolvedFile | Class holding information about the resolved file and some metadata. |
IRemoteScheduledListenersFeature | Extension of IRemoteFeature to support passing in IScheduledInvocationListener s. |
IRemoteTest | A test that reports results directly to a ITestInvocationListener . |
IReportNotExecuted | In case of an incomplete execution, IRemoteTest that implements this interface may report their non-executed tests for improved reporting. |
आईरेशेड्यूलर | भविष्य के निष्पादन के लिए कॉन्फ़िगरेशन को पुनर्निर्धारण करने के लिए इंटरफ़ेस। |
IResourceMetricCollector | The interface for user to implement customized resource collectors. |
IRestApiHelper | REST API कॉल करने के लिए एक सहायक इंटरफ़ेस। |
IResumableTest | This interface is deprecated. No need for this anymore |
IRetryDecision | Interface driving the retry decision and applying the filter on the class for more targeted retry. |
IRuntimeHintProvider | |
IRunUtil | Interface for running timed operations and system commands. |
IRunUtil.EnvPriority | Enum that defines whether setting or unsetting a particular env. |
IRunUtil.IRunnableResult | An interface for asynchronously executing an operation that returns a boolean status. |
ISandbox | Interface defining a sandbox that can be used to run an invocation. |
ISandboxFactory | Factory for creating ISandbox . |
ISetOptionReceiver | Implementation of this interface should have an Option with a "set-option" name linked to HostTest#SET_OPTION_NAME . |
IShardableListener | A ITestInvocationListener that can be sharded. |
IShardableTest | A IRemoteTest that can be split into separately executable sub-tests. |
IShardHelper | Interface of an object that describes the sharding strategy to adopt for a configuration. |
IsolatedHostTest | Implements a TradeFed runner that uses a subprocess to execute the tests in a low-dependency environment instead of executing them on the main process. |
ISupportGranularResults | Interface specifying whether a ITestInvocationListener supports receiving the granular results or not. |
ISystemStatusChecker | An checker that performs checks on system status and returns a boolean to indicate if the system is in an expected state. |
ISystemStatusCheckerReceiver | A IRemoteTest that requires access to the ISystemStatusChecker from the configuration. |
ITargetCleaner | This interface is deprecated. tearDown has been moved to the base ITargetPreparer interface. |
ITargetPreparer | Prepares the test environment for the test run. |
ITerribleFailureHandler | An interface to handle terrible failures from LogUtil.CLog.wtf(String, Throwable)
|
ITestAnnotationFilterReceiver | A runner that can filter which tests to run based on annotations. |
ITestCollector | Provides support for test collection; when set, test runner must perform a dry run to collect test cases without actually executing them. |
ITestDevice | Provides an reliable and slightly higher level API to a ddmlib IDevice . |
ITestDevice.ApexInfo | A simple struct class to store information about a single APEX |
ITestDevice.MountPointInfo | A simple struct class to store information about a single mountpoint |
ITestDevice.RecoveryMode | |
ITestFileFilterReceiver | A runner that can receive a file specifying which tests to run and/or not to run. |
ITestFilterReceiver | A runner that can filter which tests to run. |
ITestInformationReceiver | Interface to receive the TestInformation for some classes. |
आईटेस्टइनवोकेशन | एक ट्रेडफेडरेशन परीक्षण आमंत्रण को संभालता है। |
ITestInvocation.ExitInformation | एक आमंत्रण के लिए कुछ निकास जानकारी का प्रतिनिधित्व करता है। |
ITestInvocationListener | Listener for test results from the test invocation. |
ITestLifeCycleReceiver | Receives event notifications during instrumentation test runs. |
ITestLogger | An entity that can perform logging of data streams of various types. |
ITestLoggerReceiver | An entity that can be injected with an ITestLogger instance so that it can be used for logging purposes. |
ITestSuite | Abstract class used to run Test Suite. |
ITestSuite.MultiDeviceModuleStrategy | |
ITestSuiteResultLoader | Interface describing an helper to load previous results in a way that can be re-run. |
ITestSummaryListener | Interface that allows ITestInvocationListener to exchange some limited information via summaries. |
ITestsZipInstaller | Installs tests from a tests zip file (as outputted by the build system) on a device. |
ITokenProvider | Interface describing an object that can provide the tokens of a particular device. |
ITokenRequest | Interface a IRemoteTest can implement to expose the fact that it requires a device with a special token. |
SandboxConfigDump | Runner class that creates a IConfiguration based on a command line and dump it to a file. |
SandboxConfigDump.DumpCmd | |
SandboxConfigurationException | Special Configuration Exception coming from the Sandbox setup. |
SandboxConfigurationFactory | Special Configuration factory to handle creation of configurations for Sandboxing purpose. |
SandboxConfigUtil | A utility class for managing IConfiguration when doing sandboxing. |
SandboxedInvocationExecution | Special sandbox execution of the invocation: This is the InvocationExection for when we are inside the sandbox running the command. |
SandboxInvocationRunner | Run the tests associated with the invocation in the sandbox. |
SandboxOptions | Class that can receive and provide options to a ISandbox . |
ScreenshotOnFailureCollector | कलेक्टर जो एक टेस्ट केस के विफल होने पर स्क्रीनशॉट को कैप्चर और लॉग करेगा। |
Sdk28ModuleController | A module controller to check if a device is on SDK 28 (Android 9) or above. |
Sdk29ModuleController | Only run tests if the device under test is SDK version 29 or above. |
Sdk30ModuleController | Only run tests if the device under test is SDK version 30 or above. |
Sdk31ModuleController | Only run tests if the device under test is SDK version 31 or above. |
Sdk32ModuleController | Only run tests if the device under test is SDK version 32 or above. |
Sdk33ModuleController | परीक्षण केवल तभी चलाएं जब परीक्षणाधीन उपकरण एसडीके संस्करण 33 या इसके बाद का संस्करण हो। |
SecondaryUserHandler | Handler for ModuleParameters#SECONDARY_USER . |
SemaphoreTokenTargetPreparer | This is a preparer used to use token to serialize test excution in tradefed host. |
SerializationUtil | Utility to serialize/deserialize an object that implements ERROR(/Serializable) . |
ServiceAccountKeyCredentialFactory | A credential factory to create service account key based oauth Credential . |
SettingsBaselineSetter | A common setter to handle device baseline settings via ITestDevice.setSetting. |
ShardBuildCloner | Helper class that handles cloning a build info from the command line. |
ShardHelper | Helper class that handles creating the shards and scheduling them for an invocation. |
शार्ड लिस्टनर | एक ITestInvocationListener जो एक इनवोकेशन शार्ड (उर्फ एक इनवोकेशन स्प्लिट को समानांतर में कई संसाधनों पर चलाने के लिए) से परिणाम एकत्र करता है, और उन्हें दूसरे श्रोता को अग्रेषित करता है। |
ShardMainResultForwarder | एक ResultForwarder जो एक शार्प टेस्ट इनवोकेशन के परिणामों को जोड़ता है। |
ShellOutputReceiverStream | Utility subclass of OutputStream that writes into an IShellOutputReceiver. |
ShellStatusChecker | Check if the shell status is as expected before and after a module run. |
ShippingApiLevelModuleController | Run tests if the device meets the following conditions:- If
min-api-level is defined:- The device shipped with the
min-api-level or later.
|
शोमैपपुलरमैट्रिककलेक्टर | FilePullerDeviceMetricCollector का आधार कार्यान्वयन जो डिवाइस से शोमैप फ़ाइलों को खींचने और इससे मेट्रिक्स एकत्र करने की अनुमति देता है। |
SideloadOtaTargetPreparer | A target preparer that performs sideload of a specified OTA package, applies the package, waits for device to boot up, and injects the device build properties to use as build info This target preparer assumes that the device will be in regular adb mode when started, and will ensure that the device exits in the same mode but with the newer build applied. |
सिंपलफाइल लॉगर | एक ILeveledLogOutput जो लॉग संदेशों को stdout और एकल लॉग फ़ाइल में निर्देशित करता है। |
SimplePerfResult | Object to hold all simpleperf test results |
SimplePerfStatResultParser | A utility class to parse simpleperf result. |
SimplePerfUtil | Utility class to dispatch simple command and collect results |
SimplePerfUtil.SimplePerfType | Enum of simpleperf command options |
SimpleStats | A small utility class that calculates a few statistical measures given a numerical dataset. |
SizeLimitedOutputStream | A thread safe file backed ERROR(/OutputStream) that limits the maximum amount of data that can be written. |
SkipHWASanModuleController | Base class for a module controller to not run tests on HWASan builds. |
Sl4aBluetoothUtil | A utility class provides Bluetooth operations on one or two devices using SL4A |
Sl4aBluetoothUtil.BluetoothAccessLevel | Enums for Bluetooth device access level which are based on BluetoothDevice.java |
Sl4aBluetoothUtil.BluetoothConnectionState | Enums for Bluetooth connection states which are based on BluetoothProfile.java |
Sl4aBluetoothUtil.BluetoothPriorityLevel | Enums for Bluetooth profile priority level which are based on BluetoothProfile.java |
Sl4aBluetoothUtil.BluetoothProfile | Enums for Bluetooth profiles which are based on BluetoothProfile.java |
Sl4aClient | Sl4A client to interact via RPC with SL4A scripting layer. |
Sl4aEventDispatcher | Event dispatcher polls for event and queue them by name to be queried. |
Sl4aEventDispatcher.EventSl4aObject | Object returned by the event poller. |
SnapshotInputStreamSource | A File-backed InputStreamSource. |
SparseImageUtil | Utility to unsparse sparse images. |
SparseImageUtil.SparseInputStream | SparseInputStream read from upstream and detects the data format. |
StatsdBeforeAfterGaugeMetricPostProcessor | A post processor that processes gauge metrics collected in a "before/after" approach, ie |
StatsdEventMetricPostProcessor | A post processor that processes event metrics in statsd reports into key-value pairs, using the formatters specified on the processor. |
StatsdGenericPostProcessor | A post processor that processes binary proto statsd reports into key-value pairs by expanding the report as a tree structure. |
StatusCheckerResult | Contains the result of a ISystemStatusChecker execution. |
StatusCheckerResult.CheckStatus | |
स्टडआउट लॉगर | एक ILeveledLogOutput जो लॉग संदेशों को stdout पर निर्देशित करता है। |
StopServicesSetup | A ITargetPreparer that stops services on the device. |
StreamProtoReceiver | A receiver that translates proto TestRecord received into Tradefed events. |
StreamProtoResultReporter | An implementation of ProtoResultReporter |
StreamUtil | Utility class for managing input streams. |
StrictShardHelper | Sharding strategy to create strict shards that do not report together, |
StringEscapeUtils | Utility class for escaping strings for specific formats. |
StringUtil | Utility class for escaping strings for common string manipulation. |
StubBuildProvider | No-op empty implementation of a IBuildProvider . |
StubDevice | Stub placeholder implementation of a IDevice . |
StubKeyStoreClient | KeyStore क्लाइंट के लिए डिफ़ॉल्ट स्टब कार्यान्वयन। |
StubKeyStoreFactory | Default stub implementation for KeyStore Factory |
स्टबलोकलएंड्रॉयडवर्चुअलडिवाइस | DeviceSelectionOptions.localVirtualDeviceRequested() के true होने पर आवंटित करने के लिए DeviceManager द्वारा उपयोग किया जाने वाला एक प्लेसहोल्डर IDevice |
StubMultiTargetPreparer | Placeholder empty implementation of a IMultiTargetPreparer . |
StubTargetPreparer | Placeholder empty implementation of a ITargetPreparer . |
StubTest | No-op empty test implementation. |
StubTestRunListener | Stub implementation of ITestRunListener |
SubprocessCommandException | A subprocess command failed to run. |
SubprocessConfigBuilder | Build a wrapper TF config XML for an existing TF config. |
SubprocessEventHelper | Helper to serialize/deserialize the events to be passed to the log. |
SubprocessEventHelper.BaseTestEventInfo | Base Helper for TestIgnored information. |
SubprocessEventHelper.FailedTestEventInfo | Helper for testFailed information. |
SubprocessEventHelper.InvocationEndedEventInfo | Helper for invocation ended information. |
SubprocessEventHelper.InvocationFailedEventInfo | Helper for InvocationFailed information. |
SubprocessEventHelper.InvocationStartedEventInfo | Helper for invocation started information. |
SubprocessEventHelper.LogAssociationEventInfo | Helper for logAssociation information. |
SubprocessEventHelper.TestEndedEventInfo | Helper for testEnded information. |
SubprocessEventHelper.TestLogEventInfo | Helper for testLog information. |
SubprocessEventHelper.TestModuleStartedEventInfo | Helper for test module started information. |
SubprocessEventHelper.TestRunEndedEventInfo | Helper for testRunEnded Information. |
SubprocessEventHelper.TestRunFailedEventInfo | Helper for testRunFailed information |
SubprocessEventHelper.TestRunStartedEventInfo | Helper for testRunStarted information |
SubprocessEventHelper.TestStartedEventInfo | Helper for testStarted information |
SubprocessExceptionParser | Helper to handle the exception output from standard Tradefed command runners. |
SubprocessReportingHelper | A class to build a wrapper configuration file to use subprocess results reporter for a cluster command. |
SubprocessResultsReporter | Implements ITestInvocationListener to be specified as a result_reporter and forward from the subprocess the results of tests, test runs, test invocations. |
SubprocessTestResultsParser | Extends ERROR(/FileOutputStream) to parse the output before writing to the file so we can generate the test events on the launcher side. |
SubprocessTestResultsParser.StatusKeys | Relevant test status keys. |
SubprocessTfLauncher | A IRemoteTest for running tests against a separate TF installation. |
SuiteApkInstaller | Installs specified APKs for Suite configuration: either from $ANDROID_TARGET_OUT_TESTCASES variable or the ROOT_DIR in build info. |
SuiteModuleLoader | Retrieves Compatibility test module definitions from the repository. |
SuiteModuleLoader.ConfigFilter | A ERROR(/FilenameFilter) to find all the config files in a directory. |
सुइट परिणाम धारक | हेल्पर ऑब्जेक्ट को क्रमबद्ध करने और मंगलाचरण परिणामों को डीरियलाइज़ करने में आसानी होती है। |
सुइट परिणाम रिपोर्टर | एक संपूर्ण सूट आमंत्रण के लिए परीक्षा परिणाम एकत्र करें और अंतिम परिणाम आउटपुट करें। |
SuiteResultReporter.ModulePrepTimes | एक मॉड्यूल की तैयारी और फाड़ने के समय के लिए वस्तु धारक। |
SuiteTestFilter | Represents a filter for including and excluding tests. |
SwitchUserTargetPreparer | A ITargetPreparer that switches to the specified user kind in setUp. |
SystemServerFileDescriptorChecker | Checks if system server appears to be running out of FDs. |
SystemServerStatusChecker | Check if the pid of system_server has changed from before and after a module run. |
SystemUpdaterDeviceFlasher | A IDeviceFlasher that relies on the system updater to install a system image bundled in a OTA update package. |
SystemUtil | Utility class for making system calls. |
SystemUtil.EnvVariable | |
TableBuilder | Helper class to display a matrix of String elements in a table. |
TableFormatter | Helper class to display a matrix of String elements so each element column is lined up |
TargetSetupError | A fatal error occurred while preparing the target for testing. |
TarUtil | Utility to manipulate a tar file. |
TcpDevice | DeviceSelectionOptions.tcpDeviceRequested() के true होने पर आवंटित करने के लिए DeviceManager द्वारा उपयोग किया जाने वाला एक प्लेसहोल्डर IDevice |
TearDownPassThroughPreparer | Allows for running tearDown on preparers that are included in a config as an object. |
TelephonyHelper | A utility to use and get information related to the telephony. |
TelephonyHelper.SimCardInformation | An information holder for the sim card related information. |
TelephonyTokenProvider | Token provider for telephony related tokens. |
TemperatureThrottlingWaiter | एक ITargetPreparer जो तब तक प्रतीक्षा करता है जब तक डिवाइस का तापमान लक्ष्य तक कम नहीं हो जाता |
TemplateResolutionError | Class extending ConfigurationException for template related error during configuration parsing. |
TerribleFailureEmailHandler | A simple handler class that sends an email to interested people when a WTF (What a Terrible Failure) error occurs within a Trade Federation instance. |
TestAppInstallSetup | A ITargetPreparer that installs one or more apps from a IDeviceBuildInfo.getTestsDir() folder onto device. |
TestContext | A class to model a TestContext message of TFC API. |
TestDependencyResolver | Helper to resolve dependencies if needed. |
TestDescription | Class representing information about a test case. |
TestDescriptionsFile | A utility class for marshalling and unmarshalling a list of TestDescriptions to a test file. |
TestDevice | Implementation of a ITestDevice for a full stack android device |
TestDevice.MicrodroidBuilder | A builder used to create a Microdroid TestDevice. |
TestDeviceOptions | Container for ITestDevice Option s |
TestDeviceOptions.InstanceType | |
TestDeviceState | A more fully featured representation of device state than DeviceState . |
TestEnvironment | A class to model a TestEnvironment message returned by TFC API. |
TestErrorIdentifier | Error identifier from tests and tests runners. |
TestFailureListener | Listener used to take action such as screenshot, bugreport, logcat collection upon a test failure when requested. |
TestFailureModuleController | Controller for module that simply want to tune how the tests failures log collected are behaving. |
TestFilePushSetup | A ITargetPreparer that pushes one or more files/dirs from a IDeviceBuildInfo.getTestsDir() folder onto device. |
TestFilterHelper | Helper class for filtering tests |
TestGroupStatus | A class to store status of a test group. |
TestInfo | Stores the test information set in a TEST_MAPPING file. |
परीक्षण सूचना | होल्डर ऑब्जेक्ट जिसमें सभी जानकारी और निर्भरताएँ होती हैं, एक परीक्षण धावक या परीक्षण को ठीक से निष्पादित करने की आवश्यकता हो सकती है। |
टेस्टइन्फॉर्मेशन।बिल्डर | एक TestInformation इंस्टेंस बनाने के लिए बिल्डर। |
टेस्ट आमंत्रण | ITestInvocation का डिफ़ॉल्ट कार्यान्वयन। |
टेस्टइनवोकेशन।रनमोड | एक आमंत्रण जिस अलग मोड में चल सकता है। |
टेस्टइनवोकेशन।स्टेज | |
TestInvocationManagementServer | GRPC server helping to management test invocation and their lifecycle. |
TestMapping | A class for loading a TEST_MAPPING file. |
TestMappingSuiteRunner | Implementation of BaseTestSuite to run tests specified by option include-filter, or TEST_MAPPING files from build, as a suite. |
TestOption | Stores the test option details set in a TEST_MAPPING file. |
TestOutputUploader | Uploads test output files to local file system, GCS, or an HTTP(S) endpoint. |
TestRecordInterpreter | Utility to convert a TestRecord proto into a more easily manipulable format in Tradefed. |
TestRecordProtoUtil | Utility to read the TestRecord proto from a file. |
TestResource | टीएफसी एपीआई द्वारा लौटाए गए टेस्ट रिसोर्स संदेश को मॉडल करने के लिए एक वर्ग। |
TestResourceDownloader | A class to download test resource files from file system/GCS/HTTP. |
TestResult | Container for a result of a single test. |
TestResultListener | A simplification of ITestLifecycleListener for implementers that only care about individual test results. |
TestRunResult | Holds results from a single test run. |
TestRunToTestInvocationForwarder | Forwarder from ddmlib ITestRunListener to ITestLifeCycleReceiver . |
TestsPoolPoller | Tests wrapper that allow to execute all the tests of a pool of tests. |
TestSuiteInfo | A class that resolves loading of build related metadata for test suite To properly expose related info, a test suite must include a test-suite-info.properties file in its jar resources |
TestSummary | A class to represent a test summary. |
TestSummary.Type | |
TestSummary.TypedString | |
TestSystemAppInstallSetup | A ITargetPreparer that installs one or more apps from a IDeviceBuildInfo.getTestsDir() folder onto the /system partition on device. |
TestTimeoutEnforcer | Listeners that allows to check the execution time of a given test case and fail it if it goes over a given timeout. |
TextResultReporter | A test result reporter that forwards results to the JUnit text result printer. |
TfMetricProtoUtil | Utility class to help with the Map to Map transition. |
TfObjectTracker | A utility to track the usage of the different Trade Fedederation objects. |
TfSuiteRunner | Implementation of ITestSuite which will load tests from TF jars res/config/suite/ folder. |
TfTestLauncher | A IRemoteTest for running unit or functional tests against a separate TF installation. |
TimeStatusChecker | Status checker to ensure that the device and host time are kept in sync. |
TimeUtil | Contains time related utility methods. |
TimeVal | This is a sentinel type which wraps a Long . |
TimeWaster | A simple target preparer to waste time and potentially restart the device. |
TokenProperty | Supported token with dynamic sharding. |
TokenProviderHelper | Helper that gives the provider associated to a particular token, in order to find out if a device supports the token. |
ट्रेस सीएमडी कलेक्टर | एक IMetricCollector जो ट्रेस-cmd का उपयोग करके परीक्षण के दौरान निशान एकत्र करता है, और उन्हें आमंत्रण में लॉग करता है। |
TradefedConfigObject | A class to model a TradefedConfigObject message of TFC API. |
TradefedConfigObject.Type | A list of configuration object types which can be injected to a cluster command config. |
TradefedDelegator | Objects that helps delegating the invocation to another Tradefed binary. |
TradefedFeatureClient | A grpc client to request feature execution from the server. |
TradefedFeatureServer | A server that responds to requests for triggering features. |
TradefedSandbox | Sandbox container that can run a Trade Federation invocation. |
TradefedSandboxFactory | Default implementation for SandboxFactory |
TradefedSandboxRunner | Runner associated with a TradefedSandbox that will allow executing the sandbox. |
TradefedSandboxRunner.StubScheduledInvocationListener | A stub IScheduledInvocationListener that does nothing. |
BackgroundDeviceAction | Runs a command on a given device repeating as necessary until the action is canceled. |
बेसडिवाइसमैट्रिककलेक्टर | IMetricCollector का आधार कार्यान्वयन जो onTestRunStart(com.android.tradefed.device.metric.DeviceMetricData) और ERROR(/#onTestRunEnd(com.android.tradefed.device.metric.DeviceMetricData,Map)) पर संग्रह शुरू और बंद करने की अनुमति देता है। |
BaseEmulatorPreparer | Common preparer for launching a local emulator. |
BaseHostJUnit4Test | Base test class for running host JUnit4 style tests. |
बेसलेवल लॉगआउटपुट | ILeveledLogOutput के लिए एक आधार कार्यान्वयन जो कुछ टैग को उनके नाम या घटकों के आधार पर फ़िल्टर करने की अनुमति देता है। |
BaseModuleController | Basic implementation of IModuleController that should be implemented for checking if a module should run or not. |
BaseMultiTargetPreparer | Base implementation of IMultiTargetPreparer that allows to disable the object. |
BasePostProcessor | The base IPostProcessor that every implementation should extend. |
BaseRetryDecision | Base implementation of IRetryDecision . |
बेसस्ट्रीम लॉगर <OS आउटपुटस्ट्रीम बढ़ाता है> | एक ILeveledLogOutput जो लॉग संदेशों को आउटपुट स्ट्रीम और stdout पर निर्देशित करता है। |
BaseTargetPreparer | Base implementation class for ITargetPreparer that allows to control whether the object is disabled or not. |
BaseTestSuite | A Test for running Compatibility Test Suite with new suite system. |
BatteryController | Utility class that allows to control the battery charging state of a device. |
BatteryRechargeDeviceRecovery | Allow to trigger a command when the battery level of the device goes under a given threshold. |
BatteryTemperature | |
BatteryUnavailableDeviceRecovery | Recovery checker that will trigger a configuration if the battery level is not available. |
BeforeClassWithInfo | Similar guarantees as BeforeClass but method annotated must require a TestInformation parameter. |
BinaryState | Enum used to record ON/OFF state with a IGNORE no-op state. |
ब्लूटूथकनेक्शनलेटेंसीकलेक्टर | संग्राहक उपकरणों के लिए एक पूर्व-निर्धारित statsd अवधि मीट्रिक कॉन्फ़िगरेशन को पुश करेगा और प्रत्येक प्रोफ़ाइल के लिए ब्लूटूथ कनेक्शन अवधि एकत्र करेगा। |
ब्लूटूथकनेक्शनस्टेटकलेक्टर | यह संग्राहक प्रत्येक प्रोफ़ाइल के लिए BluetoothConnectionStateChanged मेट्रिक और रिकॉर्ड कनेक्शन स्थिति संख्या एकत्र करेगा। |
BluetoothConnectionSuccessRatePostProcessor | Implementation of postprocessor which calculates success rate for a bluetooth profile Use "metric-key-match" to specify metrics which contain bluetooth connection states in numeric array Example [0, 1, 2, 3, 0, 1, 2, 3]. |
BluetoothUtils | Utility functions for calling BluetoothInstrumentation on device Device side BluetoothInstrumentation code can be found in AOSP at: frameworks/base/core/tests/bluetoothtests |
BootstrapBuildProvider | A IDeviceBuildProvider that bootstraps build info from the test device This is typically used for devices with an externally supplied build, ie |
BootstrapServiceFileResolverLoader | Loads resolvers using the service loading facility. |
Bugreport | Object holding the bugreport files references, compatible of flat bugreport and zipped bugreport (bugreportz). |
BugreportCollector | A pass-through ITestInvocationListener that collects bugreports when configurable events occur and then calls ITestInvocationListener#testLog on its children after each bugreport is collected. |
BugreportCollector.Filter | |
BugreportCollector.Freq | |
BugreportCollector.Noun | |
BugreportCollector.Predicate | एक बग्रेपोर्ट को कब कैप्चर करना है, इसका वर्णन करने वाला एक पूर्ण विधेय। |
BugreportCollector.Relation | |
BugreportCollector.SubPredicate | |
BugreportzOnFailureCollector | परीक्षण केस के विफल होने पर बग्रेपोर्ट्ज़ लीजिए। |
BugreportzOnTestCaseFailureCollector | जब एक रन में एक परीक्षण केस विफल हो जाता है, तो एक बग्रेपोर्टज़ लीजिए। |
BuildError | Thrown if the provided build fails to run. |
BuildInfo | Generic implementation of a IBuildInfo that should be associated with a ITestDevice . |
BuildInfoKey | Class holding enumeration related to build information queries. |
BuildInfoKey.BuildInfoFileKey | Enum describing all the known file types that can be queried through IBuildInfo.getFile(com.android.tradefed.build.BuildInfoKey.BuildInfoFileKey) . |
BuildInfoRecorder | एक ITargetPreparer जो एक निर्दिष्ट फ़ाइल में जानकारी मेटा डेटा लिखता है। |
BuildInfoUtil | A util class to help manipulate IBuildInfo |
BuildRetrievalError | A fatal error occurred while retrieving the build for testing. |
BuildSerializedVersion | Class that contains the current serialization version of all IBuildInfo . |
BuildTestsZipUtils | एंड्रॉइड बिल्ड सिस्टम द्वारा उत्पन्न परीक्षण ज़िप से संबंधित संचालन के लिए एक सहायक वर्ग |
BulkEmailer | A email sender utility that allows the following configuration: sent interval,initial burst size, recipients and the total number messages. |
BundletoolUtil | Utility class that uses bundletool command line to install the .apks on deivce. |
ByteArrayInputStreamSource | |
ByteArrayList | A class to represent a lightweight byte array. |
ByteArrayUtil | Utilities to operate on byte array, eg, convert bytes to integer. |
CarModuleController | This controller prevents execution of tests cases on non-automotive devices. |
CarryDnaeError | Internal RuntimeException to carry DeviceNotAvailableException through the JUnit4 framework. |
CdmaDeviceFlasher | A class that flashes an image on a physical Android device with a CDMA radio. |
CecControllerTokenProvider | Token provider for Consumer Electronics Control (CEC) related tokens. |
CentralDirectoryInfo | CentralDirectoryInfo is a class containing the information of a file/folder inside a zip file. |
CheckPairingPreparer | A CompanionAwarePreparer that verifies BT bonding between primary and companion devices |
CircularAtraceUtil | An atrace utility developed primarily for identifying the root causes of ANRs during Monkey testing. |
CircularByteArray | Data structure for holding a fixed size array that operates as a circular buffer, and tracks the total sum of all values in the array. |
ClangCodeCoverageCollector | एक BaseDeviceMetricCollector जो डिवाइस से क्लैंग कवरेज माप को खींचेगा और उन्हें परीक्षण कलाकृतियों के रूप में लॉग करेगा। |
ClassNotFoundConfigurationException | ConfigurationException for when the class of an object is not found. |
ClassPathScanner | Finds entries on classpath. |
ClassPathScanner.ClassNameFilter | A IClassPathFilter that filters and transforms java class names. |
ClassPathScanner.ExternalClassNameFilter | A ClassNameFilter that rejects inner classes |
ClassPathScanner.IClassPathFilter | A filter for classpath entry paths Patterned after FileFilter |
ClockworkUtils | A clockwork utility for sharing multi-device logic |
ClusterBuildInfo | A IBuildInfo class for builds piped from TFC. |
ClusterBuildProvider | A IBuildProvider to download TFC test resources. |
ClusterClient | A IClusterClient implementation for interacting with the TFC backend. |
ClusterCommand | A class that represents a task fetched from TF Cluster. |
ClusterCommand.RequestType | |
ClusterCommand.State | Command's status in the TF cluster. |
ClusterCommandConfigBuilder | A class to build a configuration file for a cluster command. |
ClusterCommandEvent | A class to encapsulate cluster command events to be uploaded. |
ClusterCommandEvent.Builder | |
ClusterCommandEvent.Type | |
ClusterCommandLauncher | A IRemoteTest class to launch a command from TFC via a subprocess TF. |
ClusterCommandScheduler | A ICommandScheduler to support TFC (Tradefed Cluster). |
ClusterCommandStatus | A class that represents the state and the cancel reason for a command from TF Cluster. |
ClusterDeviceInfo | A class to encapsulate cluster device info to be uploaded. |
ClusterDeviceInfo.Builder | |
ClusterDeviceMonitor | An IDeviceMonitor implementation that reports results to the Tradefed Cluster service. |
ClusterEventUploader <T extends IClusterEvent > | ClusterEventUploader class, which uploads IClusterEvent to TFC. |
ClusterHostEvent | A class to encapsulate cluster host events to be uploaded. |
ClusterHostEvent.Builder | |
ClusterHostEvent.HostEventType | Enums of the different types of host events. |
ClusterHostUtil | Static util functions for TF Cluster to get global config instances, host information, etc. |
ClusterLogSaver | A ILogSaver class to upload test outputs to TFC. |
ClusterLogSaver.FilePickingStrategy | File picking strategies. |
क्लस्टर विकल्प | |
CodeCoverageTest | A Test that runs an instrumentation test package on a given device and generates the code coverage report. |
CollectingByteOutputReceiver | A IShellOutputReceiver which collects the whole shell output into a byte[] . |
CollectingOutputReceiver | A IShellOutputReceiver which collects the whole shell output into one String . |
CollectingTestListener | A ITestInvocationListener that will collect all test results. |
कलेक्टर हेल्पर | कई जगहों पर आवश्यक कुछ IMetricCollector संचालन करने के लिए हेल्पर। |
CommandFileParser | Parser for file that contains set of command lines. |
CommandFileParser.CommandLine | |
CommandInterrupter | Service allowing TradeFederation commands to be interrupted or marked as uninterruptible. |
CommandLineBuildInfoBuilder | Utility meant to capture the usual build information arguments from a command line and create a IBuildInfo from them. |
CommandOptions | Implementation of ICommandOptions . |
CommandOptionsGetter | Service implementation that returns the command options value of a given invocation. |
CommandResult | Contains the result of a command. |
CommandRunner | An alternate TradeFederation entry point that will run command specified in command line arguments and then quit. |
CommandRunner.ExitCode | Error codes that are possible to exit with. |
CommandScheduler | A scheduler for running TradeFederation commands across all available devices. |
CommandScheduler.HostState | Enums of different status of host |
CommandStatus | Represents the status of an timed operation. |
CommandStatusHandler | Handler helping to monitor and update the status of an invocation. |
CommonLogRemoteFileUtil | This utility allows to avoid code duplication across the different remote device representation for the remote log fetching logic of common files. |
CommonLogRemoteFileUtil.KnownLogFileEntry | A representation of a known log entry for remote devices. |
CompanionAllocator | Base class that takes care of allocating and freeing companion device getCompanionDeviceSelectionOptions() should be implemented to describe the criteria needed to allocate the companion device |
CompanionAwarePreparer | An ITargetPreparer that encapsulates the logic of getting an already allocated companion device. |
CompanionAwareTest | Base test class that encapsulates boilerpate of getting and checking companion device Subclass may call getCompanion() to retrieve the allocated companion. |
CompanionDeviceTracker | A class for allocating and freeing companion devices |
CompanionRunCommandTargetPreparer | A ITargetPreparer that runs specified commands on the allocated companion device |
CompanionTestAppInstallSetup | A ITargetPreparer that installs one or more apps from a IDeviceBuildInfo#getTestsDir() folder onto an allocated companion device. |
ConditionPriorityBlockingQueue <T> | A thread-safe class with ERROR(/PriorityBlockingQueue) -like operations that can retrieve objects that match a certain condition. |
ConditionPriorityBlockingQueue.AlwaysMatch <T> | A ConditionPriorityBlockingQueue.IMatcher that matches any object. |
ConditionPriorityBlockingQueue.IMatcher <T> | An interface for determining if elements match some sort of condition. |
ConfigCompleter | Implementation of the Completer for our TF configurations. |
Configuration | A concrete IConfiguration implementation that stores the loaded config objects in a map. |
ConfigurationDef | Holds a record of a configuration, its associated objects and their options. |
ConfigurationDef.ConfigObjectDef | Object to hold info for a className and the appearance number it has (eg if a config has the same object twice, the first one will have the first appearance number). |
ConfigurationDescriptor | Configuration Object that describes some aspect of the configuration itself. |
ConfigurationDescriptor.LocalTestRunner | Enum used to indicate local test runner. |
ConfigurationException | Thrown if configuration could not be loaded. |
ConfigurationFactory | Factory for creating IConfiguration . |
ConfigurationFactory.ConfigLoader | Implementation of IConfigDefLoader that tracks the included configurations from one root config, and throws an exception on circular includes. |
ConfigurationFactory.ExceptionLoader | |
ConfigurationUtil | Utility functions to handle configuration files. |
ConfigurationXmlParserSettings | A simple class to accept settings for the ConfigurationXmlParser To pass settings to this class, the alias is mandatory. |
ConfigurationYamlParser | Parser for YAML style Tradefed configurations |
ConfigUtil | Utility class for creating, interacting with, and pushing statsd configuration files. |
Console | Main TradeFederation console providing user with the interface to interact Currently supports operations such as - add a command to test
- list devices and their state
- list invocations in progress
- list commands in queue
- dump invocation log to file/stdout
- shutdown
|
Console.ArgRunnable <T> | A Runnable with a run method that can take an argument |
Console.CaptureList | A convenience type for List<List<String>> |
ConsoleReaderOutputStream | An OutputStream that can be used to make System.out.print() play nice with the user's LineReader unfinishedLine. |
ConsoleResultReporter | Result reporter to print the test results to the console. |
ContentProviderHandler | Handler that abstract the content provider interactions and allow to use the device side content provider for different operations. |
CountingTestResultListener | A TestResultListener that tracks the total number of tests by TestStatus |
काउंट टेस्टकेस कलेक्टर | किसी दिए गए IRemoteTest के लिए परीक्षण मामलों की संख्या की गणना करें और रिपोर्ट करें। |
कवरेज मापन फारवर्डर | एक प्लेसहोल्डर परीक्षण जो बिल्ड प्रदाता से लकड़हारे तक कवरेज माप को अग्रेषित करता है। |
CoverageOptions | Tradefed object to hold coverage options. |
CoverageOptions.Toolchain | |
CpuThrottlingWaiter | An ITargetPreparer that waits until max frequency on all cores are restored to highest level available |
CreateAvdPreparer | |
CreateUserPreparer | Target preparer for creating user and cleaning it up at the end. |
CurrentInvocation | A class that tracks and provides the current invocation information useful anywhere inside the invocation. |
CurrentInvocation.InvocationInfo | Some special named key that we will always populate for the invocation. |
CurrentInvocation.IsolationGrade | Describes the level of isolation |
DebugHostLogOnFailureCollector | कलेक्टर जो टेस्ट केस की विफलता होने पर होस्ट-साइड लॉग को इकट्ठा करेगा और लॉग करेगा। |
DefaultRemoteAndroidTestRunner | Extension of the ddmlib RemoteAndroidTestRunner to set some default for Tradefed use cases. |
DefaultTestsZipInstaller | A default implementation of tests zip installer. |
प्रत्यायोजित आमंत्रण निष्पादन | आमंत्रण निष्पादन जो निष्पादन को किसी अन्य InvocationExecution बाइनरी को सौंपता है। |
DependenciesResolver | A new type of provider that allows to get all the dependencies for a test. |
DeviceAllocationResult | Represents the results of an allocation attempt for a command. |
DeviceAllocationState | Represents the allocation state of the device from the IDeviceManager perspective |
DeviceAvailableChecker | Checker to ensure a module doesn't leave the device in an offline state. |
DeviceBaselineChecker | Set device baseline settings before each module. |
DeviceBaselineSetter | Abstract class used to create a device baseline setting. |
DeviceBatteryLevelChecker | An IRemoteTest that checks for a minimum battery charge, and waits for the battery to reach a second charging threshold if the minimum charge isn't present. |
DeviceBatteryResourceMetricCollector | This collector collects device battery metrics. |
DeviceBuildDescriptor | A wrapper class for a IBuildInfo , that contains helper methods to retrieve device platform build information. |
DeviceBuildInfo | एक IBuildInfo जो एक संपूर्ण Android डिवाइस बिल्ड और (वैकल्पिक रूप से) इसके परीक्षणों का प्रतिनिधित्व करता है। |
DeviceBuildInfoBootStrapper | A ITargetPreparer that replaces build info fields with attributes read from device This is useful for testing devices with builds generated from an external source (eg |
DeviceBuildInfoInjector | A ITargetPreparer that inserts DeviceBuildDescriptor metadata into the IBuildInfo . |
DeviceCleaner | Performs reboot or format as cleanup action after test, and optionally turns screen off |
DeviceCleaner.CleanupAction | |
DeviceCleaner.PostCleanupAction | |
DeviceConcurrentUtil | Contains utility methods and classes for concurrent device side command execution Use ERROR(/ExecutorService) to run commands implemented as ShellCommandCallable , and use ERROR(/#joinFuture(String,Future,long)) for synchronization against the ERROR(/Future) as returned by ERROR(/ExecutorService) for the command execution. |
DeviceConcurrentUtil.ShellCommandCallable <V> | A ERROR(/Callable) that wraps the details of executing shell command on an ITestDevice . |
डिवाइसकॉन्फ़िगरेशनहोल्डर | एक ठोस IDeviceConfiguration कार्यान्वयन जो लोड किए गए डिवाइस कॉन्फ़िगरेशन ऑब्जेक्ट को उसकी विशेषताओं में संग्रहीत करता है। |
DeviceDescriptor | A class containing information describing a device under test. |
DeviceDisconnectedException | Thrown when a device is no longer reachable via it's transport type, eg if the device is no longer visible via USB, or TCP/IP connection |
DeviceErrorIdentifier | Error Identifiers from Device errors and device reported errors. |
DeviceFailedToBootError | Thrown if a device fails to boot after being flashed with a build. |
DeviceFeatureModuleController | A module controller to not run tests when it doesn't support certain feature. |
DeviceFileReporter | A utility class that checks the device for files and sends them to ITestInvocationListener#testLog(String, LogDataType, InputStreamSource) if found. |
DeviceFlashPreparer | A ITargetPreparer that flashes an image on physical Android hardware. |
DeviceFoldableState | Representation of device foldable state as returned by "cmd device_state print-states". |
DeviceFolderBuildInfo | एक IDeviceBuildInfo जिसमें स्थानीय फाइल सिस्टम पर निर्देशिका में निहित अन्य बिल्ड आर्टिफैक्ट भी शामिल हैं। |
DeviceImageZipFlashingTargetPreparer | A target preparer that flashes the device with device images provided via a specific format. |
DeviceInternetAccessibilityResourceMetricCollector | कलेक्टर यह जांचने के लिए google.com को पिंग करता है कि डिवाइस में इंटरनेट एक्सेसिबिलिटी है या नहीं। |
DeviceJUnit4ClassRunner | JUnit4 test runner that also accommodates IDeviceTest . |
DeviceJUnit4ClassRunner.LogAnnotation | Fake annotation meant to carry logs to the reporters. |
DeviceJUnit4ClassRunner.MetricAnnotation | Fake annotation meant to carry metrics to the reporters. |
DeviceJUnit4ClassRunner.TestLogData | Implementation of ExternalResource and TestRule . |
DeviceJUnit4ClassRunner.TestMetrics | Implementation of ExternalResource and TestRule . |
DeviceJUnit4ClassRunnerBuilder | A RunnerBuilder that supplies DeviceJUnit4ClassRunner s, specifically used for supplying runners for a ERROR(LongevitySuite/android.host.test.longevity.LongevitySuite LongevitySuite) and LongevityHostRunner . |
DeviceManagementGrpcServer | GRPC server allowing to reserve a device from Tradefed. |
DeviceManager | |
DeviceManager.FastbootDevice | Representation of a device in Fastboot mode. |
डिवाइसमेट्रिकडेटा | मीट्रिक संग्राहकों द्वारा एकत्र किए गए सभी डेटा को रखने पर आपत्ति। |
DeviceMonitorMultiplexer | A proxy class to propagate requests to multiple IDeviceMonitor s. |
DeviceNotAvailableException | Thrown when a device is no longer available for testing. |
DeviceOwnerTargetPreparer | An ITargetPreparer that sets up a device owner component. |
DeviceParameterizedRunner | JUnit4 style parameterized runner for host-side driven parameterized tests. |
DeviceProperties | Common constant definitions for device side property names |
DeviceRecoveryModeUtil | |
DeviceReleaseReporter | Device release reporter that handles communicating with the parent process the device(s) to be released. |
DeviceResetFeature | Server side implementation of device reset. |
DeviceResetHandler | Utility handling generically device resetting. |
DeviceRuntimeException | Thrown when a device action did not results in the expected results. |
DeviceSelectionOptions | Container for for device selection criteria. |
DeviceSelectionOptions.DeviceRequestedType | The different possible types of placeholder devices supported. |
DeviceSettingChecker | Check if device settings have changed during a module run. |
DeviceSetup | A ITargetPreparer that configures a device for testing based on provided Option s. |
DeviceStateMonitor | Helper class for monitoring the state of a IDevice . |
DeviceStorageAgeResourceMetricCollector | Parse storage age from logcat. |
DeviceStorageFiller | Target preparer to fill up storage so some amount of free space is available. |
DeviceStorageStatusChecker | Check if device has enough disk space for the given partitions. |
DeviceStringPusher | Target preparer to write a string to a file. |
DeviceSuite | Extends the JUnit4 container Suite in order to provide a ITestDevice to the tests that requires it. |
DeviceTestCase | Helper JUnit test case that provides the IRemoteTest and IDeviceTest services. |
DeviceTestResult | An specialization of TestResult that will abort when a DeviceNotAvailableException occurs |
DeviceTestResult.RuntimeDeviceNotAvailableException | |
DeviceTestRunOptions | A builder class for options related to running device tests through BaseHostJUnit4Test. |
DeviceTestSuite | Helper JUnit test suite that provides the IRemoteTest and IDeviceTest services. |
डिवाइस अनुपलब्ध मॉनिटर | यह श्रोता केवल परीक्षण केस स्तर DNAE को पकड़ने का प्रयास करता है। |
DeviceUnresponsiveException | A specialization of DeviceNotAvailableException that indicates device is visible to adb, but is unresponsive (ie, commands timing out, won't boot, etc) |
DeviceUpdateTargetPreparer | An abstract ITargetPreparer that takes care of common steps around updating devices with a device image file from an external source (as opposed to a build service). |
DeviceWifiResourceMetricCollector | The collector collects current connected wifi signal strength and link speed metrics. |
DeviceWiper | एक ITargetPreparer जो उपयोगकर्ता डेटा को मिटा देता है |
DirectedGraph <V> | A directed unweighted graphs implementation. |
DisableSELinuxTargetPreparer | Target preparer that disables SELinux if enabled. |
DryRunKeyStore | A keystore for dry-run where any keystore value is always properly replaced and found. |
ड्राई रनर | वास्तव में उन्हें निष्पादित करने के बजाय पारदर्शी रूप से सूखा परीक्षण चलाता है। |
DynamicFileStubTest | This is a tradefed test to test tradefed can resolve dynamic file correctly. |
DynamicRemoteFileResolver | Class that helps resolving path to remote files. |
DynamicRemoteFileResolver.FileResolverLoader | Loads implementations of IRemoteFileResolver . |
DynamicSystemPreparer | An ITargetPreparer that sets up a system image on top of a device build with the Dynamic System Update. |
IAbi | Interface representing the ABI under test. |
IAbiReceiver | A test that needs the ABI under test. |
IAndroidDebugBridge | Interface definition for AndroidDebugBridge methods used in this package. |
IAppBuildInfo | This interface is deprecated. Use IBuildInfo directly. |
IAutoRetriableTest | Interface for an IRemoteTest that doesn't implement ITestFilterReceiver but still wishes to support auto-retry. |
IBatteryInfo | The interface defining the interaction with a battery of a device. |
IBatteryInfo.BatteryState | Describes the current battery charging state. |
IBuildInfo | Holds information about the build under test. |
IBuildInfo.BuildInfoProperties | Some properties that a IBuildInfo can have to tweak some handling of it. |
IBuildProvider | Responsible for providing info regarding the build under test. |
IBuildReceiver | A test that needs reference to the build under test. |
IClusterClient | An interface for interacting with the TFC backend. |
IClusterEvent | Interface for any cluster event to be uploaded to TFC. |
IClusterEventUploader <T extends IClusterEvent > | Interface for ClusterEventUploader |
IClusterOptions | क्लस्टर से संबंधित विकल्प प्राप्त करने के लिए एक इंटरफ़ेस। |
ICommandOptions | Container for execution options for commands. |
ICommandScheduler | A scheduler for running TradeFederation commands. |
ICommandScheduler.IScheduledInvocationListener | Listener for invocation events when invocation completes. |
ICompressionStrategy | An interface representing a compression algorithm that can be selected at runtime. |
IConfigOptionValueTransformer | An interface for manipulating config option value |
IConfigurableVirtualDevice | An interface to provide information about a possibly preconfigured virtual device info (host ip, host user, ports offset and etc.). |
IConfiguration | Configuration information for a TradeFederation invocation. |
IConfigurationFactory | Factory for creating IConfiguration s |
IConfigurationReceiver | Simple interface to represent object that accepts an IConfiguration . |
IConfigurationServer | कॉन्फ़िगरेशन सर्वर के लिए एक इंटरफ़ेस। |
ICredentialFactory | An interface for credential factory to create oauth2 Credential . |
IDefaultObjectLoader | Interface for loading the default objects that should be part of our YAML configuration. |
IDefaultObjectLoader.LoaderConfiguration | The loading configuration object to pass information to the loader. |
IDeviceBuildInfo | एक IBuildInfo जो एक संपूर्ण Android डिवाइस बिल्ड और (वैकल्पिक रूप से) इसके परीक्षणों का प्रतिनिधित्व करता है। |
IDeviceBuildProvider | A IBuildProvider that uses information from a ITestDevice to retrieve a build. |
IDeviceConfiguration | डिवाइस कॉन्फ़िगरेशन धारक इंटरफ़ेस। |
IDeviceFlasher | Flashes a device image on a device. |
IDeviceFlasher.UserDataFlashOption | Enum of options for handling the userdata image |
IDeviceManager | Interface for managing the set of available devices for testing. |
IDeviceManager.IFastbootListener | A listener for fastboot state changes. |
IDeviceMonitor | Interface for monitoring state of devices. |
IDeviceMonitor.DeviceLister | A Runnable -like class that should return the known devices and their states. |
IDeviceRecovery | Interface for recovering a device that has gone offline. |
IDeviceSelection | Interface for device selection criteria. |
IDeviceStateMonitor | Provides facilities for monitoring the state of a IDevice . |
IDeviceTest | Interface for object that needs a reference to a ITestDevice . |
IDisableable | Interface that describes a Tradefed object that can be disabled. |
IEmail | Interface for sending email. |
IEmail.Message | Container for email message data. |
IFileDownloader | Interface for downloading a remote file. |
IFileEntry | इंटरफ़ेस परिभाषा जो FileEntry विधियों को सरल, नकली अनुबंध प्रदान करती है। |
IFileResolverLoader | Loads implementations of IRemoteFileResolver . |
IFileResolverLoader.ResolverLoadingException | यदि कोई रिज़ॉल्वर लोड या इनिशियलाइज़ नहीं किया जा सकता है तो अपवाद को फेंक दिया जाता है। |
IFlashingResourcesParser | Interface for providing required versions of auxiliary image files needed to flash a device. |
IFlashingResourcesRetriever | Interface for retrieving auxiliary image files needed to flash a device. |
IFolderBuildInfo | A simple abstract IBuildInfo whose build artifacts are containing in a local filesystem directory. |
IFormatterGenerator | SuiteResultHolder के लिए एक फ़ॉर्मेटर का वर्णन करने वाला इंटरफ़ेस। |
IGlobalConfiguration | A class to encompass global configuration information for a single Trade Federation instance (encompassing any number of invocations of actual configurations). |
IHarnessException | Description of the harness exception interface that will be implemented by harness exceptions. |
IHostCleaner | Cleans up the host after the test run has finished. |
IHostHealthAgent | An interface to emit host or device metrics. |
IHostMonitor | Interface to dispatch host data |
IHostMonitor.HostDataPoint | Generic class for data to be reported. |
IHostMonitor.HostMetricType | |
IHostOptions | Host options holder interface. |
IHostOptions.PermitLimitType | Enum describing the possible permit limiters |
IHostResourceManager | Interface to manager host resource. |
IHttpHelper | Helper methods for performing http requests. |
IHttpHelper.DataSizeException | |
Iइनवोकेशनसंदर्भ | यदि आवश्यक हो तो परीक्षणों तक पहुंचने के लिए आमंत्रण के बारे में जानकारी रखता है। |
IInvocationContext.TimeingEvent | |
IInvocationContextReceiver | A test that needs reference to the context of the invocation. |
Iआमंत्रण निष्पादन | एक आमंत्रण के हिस्से के रूप में की जाने वाली क्रियाओं का वर्णन करने वाला इंटरफ़ेस। |
IKeyStoreClient | Interface to access a key store for password or sensitive data. |
IKeyStoreFactory | Factory for creating IKeyStoreClient . |
ILabPreparer | Marker interface for lab preparers See ITargetPreparer for a description of what these interfaces are intended. |
ILeveledLogOutput | इस इंटरफ़ेस को लागू करने वाली कक्षाएं लॉग संदेशों को आउटपुट करने के तरीके प्रदान करती हैं। |
ILogcatReceiver | A class that provides the output of a device's logcat as an InputStreamSource . |
ILogRegistry | An interface for a ILogOutput singleton logger that multiplexes and manages different loggers. |
ILogRegistry.EventType | Events that are useful to be logged |
ILogSaver | Classes which implement this interface provide methods for storing logs to a central location. |
ILogSaverListener | Allows for ITestInvocationListener s to listen for when log files are saved. |
IManagedTestDevice | A ITestDevice whose lifecycle is managed. |
IManagedTestDevice.DeviceEventResponse | Container for a response to a IManagedTestDevice#handleAllocationEvent(DeviceEvent) call |
IManagedTestDeviceFactory | Creator interface for IManagedTestDevice s |
आईमेट्रिक कलेक्टर | इस इंटरफ़ेस को डेकोरेटर के रूप में तब जोड़ा जाएगा जब रिपोर्टिंग परीक्षण के परिणाम मिलते-जुलते मीट्रिक एकत्र करने के लिए होंगे। |
आईमेट्रिक कलेक्टर रिसीवर | IRemoteTest को लागू करने के लिए इंटरफ़ेस यदि उन्हें परीक्षण चलाने के लिए IMetricCollector s की सूची प्राप्त करने की आवश्यकता है। |
IMoblyYamlResultHandler | Interface of mobly yaml result handler. |
IMoblyYamlResultHandler.ITestResult | Interface of mobly yaml result |
IModuleController | Interface for controlling if a module should be executed or not. |
IModuleController.RunStrategy | Enum describing how the module should be executed. |
IModuleParameterHandler | The interface for parameters of suites modules. |
IMultiDeviceRecovery | Interface for recovering multiple offline devices. |
IMultiDeviceTest | This interface is deprecated. This interface is kept temporarily for compatibility but is not actually used anymore. Please do not implement it. |
IMultiTargetPreparer | Prepares the test environment for several devices together. |
INativeDevice | Provides an reliable and slightly higher level API to a ddmlib IDevice . |
INativeDeviceTest | Interface for object that needs a reference to a INativeDevice . |
InfraErrorIdentifier | Error Identifiers from Trade Federation infra, and dependent infra (like Build infra). |
InputStreamSource | This interface basically wraps an ERROR(/InputStream) to make it clonable. |
InstallAllTestZipAppsSetup | A ITargetPreparer that installs all apps in a test zip. |
InstallApexModuleTargetPreparer | |
InstallApkSetup | A ITargetPreparer that installs one or more apks located on the filesystem. |
InstallBuildEnvApkSetup | A ITargetPreparer that installs one or more test apks from an Android platform build env. |
InstalledInstrumentationsTest | Runs all instrumentation found on current device. |
InstantAppHandler | Handler for ModuleParameters#INSTANT_APP . |
InstrumentationPreparer | A ITargetPreparer that runs instrumentation |
InstrumentationTest | A Test that runs an instrumentation test package on given device. |
आह्वान प्रसंग | IInvocationContext का सामान्य कार्यान्वयन। |
आह्वान निष्पादन | कक्षा जो सभी आमंत्रण चरणों का वर्णन करती है: डाउनलोड करें, target_prep बनाएं, परीक्षण चलाएं, साफ़ करें। |
InvocationLocal <T> | This class provides invocation-scope variables. |
InvocationMetricLogger | A utility class for an invocation to log some metrics. |
InvocationMetricLogger.InvocationGroupMetricKey | Grouping allows to log several groups under a same key. |
InvocationMetricLogger.InvocationMetricKey | Some special named key that we will always populate for the invocation. |
InvocationStatus | A class to store invocation status. |
InvocationStatus | A helper enum to represent the invocation status |
InvocationSummaryHelper | Helper class for gathering and reporting TestSummary for set of listeners |
InvocationToJUnitResultForwarder | A class that listens to ITestInvocationListener events and forwards them to a TestListener . |
IPostProcessor | Post processors is a Trade Federation object meant to allow the processing of metrics and logs AFTER the tests and BEFORE result reporting. |
IRemoteFeature | Interface describing a feature in Tradefed that can be executed based on the request. |
IRemoteFileResolver | Interface for objects that can resolve a remote file into a local one. |
IRemoteFileResolver.RemoteFileResolverArgs | The args passed to the resolvers |
IRemoteFileResolver.ResolvedFile | Class holding information about the resolved file and some metadata. |
IRemoteScheduledListenersFeature | Extension of IRemoteFeature to support passing in IScheduledInvocationListener s. |
IRemoteTest | A test that reports results directly to a ITestInvocationListener . |
IReportNotExecuted | In case of an incomplete execution, IRemoteTest that implements this interface may report their non-executed tests for improved reporting. |
आईरेशेड्यूलर | भविष्य के निष्पादन के लिए कॉन्फ़िगरेशन को पुनर्निर्धारण करने के लिए इंटरफ़ेस। |
IResourceMetricCollector | The interface for user to implement customized resource collectors. |
IRestApiHelper | REST API कॉल करने के लिए एक सहायक इंटरफ़ेस। |
IResumableTest | This interface is deprecated. No need for this anymore |
IRetryDecision | Interface driving the retry decision and applying the filter on the class for more targeted retry. |
IRuntimeHintProvider | |
IRunUtil | Interface for running timed operations and system commands. |
IRunUtil.EnvPriority | Enum that defines whether setting or unsetting a particular env. |
IRunUtil.IRunnableResult | An interface for asynchronously executing an operation that returns a boolean status. |
ISandbox | Interface defining a sandbox that can be used to run an invocation. |
ISandboxFactory | Factory for creating ISandbox . |
ISetOptionReceiver | Implementation of this interface should have an Option with a "set-option" name linked to HostTest#SET_OPTION_NAME . |
IShardableListener | A ITestInvocationListener that can be sharded. |
IShardableTest | A IRemoteTest that can be split into separately executable sub-tests. |
IShardHelper | Interface of an object that describes the sharding strategy to adopt for a configuration. |
IsolatedHostTest | Implements a TradeFed runner that uses a subprocess to execute the tests in a low-dependency environment instead of executing them on the main process. |
ISupportGranularResults | Interface specifying whether a ITestInvocationListener supports receiving the granular results or not. |
ISystemStatusChecker | An checker that performs checks on system status and returns a boolean to indicate if the system is in an expected state. |
ISystemStatusCheckerReceiver | A IRemoteTest that requires access to the ISystemStatusChecker from the configuration. |
ITargetCleaner | This interface is deprecated. tearDown has been moved to the base ITargetPreparer interface. |
ITargetPreparer | Prepares the test environment for the test run. |
ITerribleFailureHandler | An interface to handle terrible failures from LogUtil.CLog.wtf(String, Throwable)
|
ITestAnnotationFilterReceiver | A runner that can filter which tests to run based on annotations. |
ITestCollector | Provides support for test collection; when set, test runner must perform a dry run to collect test cases without actually executing them. |
ITestDevice | Provides an reliable and slightly higher level API to a ddmlib IDevice . |
ITestDevice.ApexInfo | A simple struct class to store information about a single APEX |
ITestDevice.MountPointInfo | A simple struct class to store information about a single mountpoint |
ITestDevice.RecoveryMode | |
ITestFileFilterReceiver | A runner that can receive a file specifying which tests to run and/or not to run. |
ITestFilterReceiver | A runner that can filter which tests to run. |
ITestInformationReceiver | Interface to receive the TestInformation for some classes. |
आईटेस्टइनवोकेशन | एक ट्रेडफेडरेशन परीक्षण आमंत्रण को संभालता है। |
ITestInvocation.ExitInformation | एक आमंत्रण के लिए कुछ निकास जानकारी का प्रतिनिधित्व करता है। |
ITestInvocationListener | Listener for test results from the test invocation. |
ITestLifeCycleReceiver | Receives event notifications during instrumentation test runs. |
ITestLogger | An entity that can perform logging of data streams of various types. |
ITestLoggerReceiver | An entity that can be injected with an ITestLogger instance so that it can be used for logging purposes. |
ITestSuite | Abstract class used to run Test Suite. |
ITestSuite.MultiDeviceModuleStrategy | |
ITestSuiteResultLoader | Interface describing an helper to load previous results in a way that can be re-run. |
ITestSummaryListener | Interface that allows ITestInvocationListener to exchange some limited information via summaries. |
ITestsZipInstaller | Installs tests from a tests zip file (as outputted by the build system) on a device. |
ITokenProvider | Interface describing an object that can provide the tokens of a particular device. |
ITokenRequest | Interface a IRemoteTest can implement to expose the fact that it requires a device with a special token. |
SandboxConfigDump | Runner class that creates a IConfiguration based on a command line and dump it to a file. |
SandboxConfigDump.DumpCmd | |
SandboxConfigurationException | Special Configuration Exception coming from the Sandbox setup. |
SandboxConfigurationFactory | Special Configuration factory to handle creation of configurations for Sandboxing purpose. |
SandboxConfigUtil | A utility class for managing IConfiguration when doing sandboxing. |
SandboxedInvocationExecution | Special sandbox execution of the invocation: This is the InvocationExection for when we are inside the sandbox running the command. |
SandboxInvocationRunner | Run the tests associated with the invocation in the sandbox. |
SandboxOptions | Class that can receive and provide options to a ISandbox . |
ScreenshotOnFailureCollector | कलेक्टर जो एक टेस्ट केस के विफल होने पर स्क्रीनशॉट को कैप्चर और लॉग करेगा। |
Sdk28ModuleController | A module controller to check if a device is on SDK 28 (Android 9) or above. |
Sdk29ModuleController | Only run tests if the device under test is SDK version 29 or above. |
Sdk30ModuleController | Only run tests if the device under test is SDK version 30 or above. |
Sdk31ModuleController | Only run tests if the device under test is SDK version 31 or above. |
Sdk32ModuleController | Only run tests if the device under test is SDK version 32 or above. |
Sdk33ModuleController | परीक्षण केवल तभी चलाएं जब परीक्षणाधीन उपकरण एसडीके संस्करण 33 या इसके बाद का संस्करण हो। |
SecondaryUserHandler | Handler for ModuleParameters#SECONDARY_USER . |
SemaphoreTokenTargetPreparer | This is a preparer used to use token to serialize test excution in tradefed host. |
SerializationUtil | Utility to serialize/deserialize an object that implements ERROR(/Serializable) . |
ServiceAccountKeyCredentialFactory | A credential factory to create service account key based oauth Credential . |
SettingsBaselineSetter | A common setter to handle device baseline settings via ITestDevice.setSetting. |
ShardBuildCloner | Helper class that handles cloning a build info from the command line. |
ShardHelper | Helper class that handles creating the shards and scheduling them for an invocation. |
शार्ड लिस्टनर | एक ITestInvocationListener जो एक इनवोकेशन शार्ड (उर्फ एक इनवोकेशन स्प्लिट को समानांतर में कई संसाधनों पर चलाने के लिए) से परिणाम एकत्र करता है, और उन्हें दूसरे श्रोता को अग्रेषित करता है। |
ShardMainResultForwarder | एक ResultForwarder जो एक शार्प टेस्ट इनवोकेशन के परिणामों को जोड़ता है। |
ShellOutputReceiverStream | Utility subclass of OutputStream that writes into an IShellOutputReceiver. |
ShellStatusChecker | Check if the shell status is as expected before and after a module run. |
ShippingApiLevelModuleController | Run tests if the device meets the following conditions:- If
min-api-level is defined:- The device shipped with the
min-api-level or later.
|
शोमैपपुलरमैट्रिककलेक्टर | FilePullerDeviceMetricCollector का आधार कार्यान्वयन जो डिवाइस से शोमैप फ़ाइलों को खींचने और इससे मेट्रिक्स एकत्र करने की अनुमति देता है। |
SideloadOtaTargetPreparer | A target preparer that performs sideload of a specified OTA package, applies the package, waits for device to boot up, and injects the device build properties to use as build info This target preparer assumes that the device will be in regular adb mode when started, and will ensure that the device exits in the same mode but with the newer build applied. |
सिंपलफाइल लॉगर | एक ILeveledLogOutput जो लॉग संदेशों को stdout और एकल लॉग फ़ाइल में निर्देशित करता है। |
SimplePerfResult | Object to hold all simpleperf test results |
SimplePerfStatResultParser | A utility class to parse simpleperf result. |
SimplePerfUtil | Utility class to dispatch simple command and collect results |
SimplePerfUtil.SimplePerfType | Enum of simpleperf command options |
SimpleStats | A small utility class that calculates a few statistical measures given a numerical dataset. |
SizeLimitedOutputStream | A thread safe file backed ERROR(/OutputStream) that limits the maximum amount of data that can be written. |
SkipHWASanModuleController | Base class for a module controller to not run tests on HWASan builds. |
Sl4aBluetoothUtil | A utility class provides Bluetooth operations on one or two devices using SL4A |
Sl4aBluetoothUtil.BluetoothAccessLevel | Enums for Bluetooth device access level which are based on BluetoothDevice.java |
Sl4aBluetoothUtil.BluetoothConnectionState | Enums for Bluetooth connection states which are based on BluetoothProfile.java |
Sl4aBluetoothUtil.BluetoothPriorityLevel | Enums for Bluetooth profile priority level which are based on BluetoothProfile.java |
Sl4aBluetoothUtil.BluetoothProfile | Enums for Bluetooth profiles which are based on BluetoothProfile.java |
Sl4aClient | Sl4A client to interact via RPC with SL4A scripting layer. |
Sl4aEventDispatcher | Event dispatcher polls for event and queue them by name to be queried. |
Sl4aEventDispatcher.EventSl4aObject | Object returned by the event poller. |
SnapshotInputStreamSource | A File-backed InputStreamSource. |
SparseImageUtil | Utility to unsparse sparse images. |
SparseImageUtil.SparseInputStream | SparseInputStream read from upstream and detects the data format. |
StatsdBeforeAfterGaugeMetricPostProcessor | A post processor that processes gauge metrics collected in a "before/after" approach, ie |
StatsdEventMetricPostProcessor | A post processor that processes event metrics in statsd reports into key-value pairs, using the formatters specified on the processor. |
StatsdGenericPostProcessor | A post processor that processes binary proto statsd reports into key-value pairs by expanding the report as a tree structure. |
StatusCheckerResult | Contains the result of a ISystemStatusChecker execution. |
StatusCheckerResult.CheckStatus | |
स्टडआउट लॉगर | एक ILeveledLogOutput जो लॉग संदेशों को stdout पर निर्देशित करता है। |
StopServicesSetup | A ITargetPreparer that stops services on the device. |
StreamProtoReceiver | A receiver that translates proto TestRecord received into Tradefed events. |
StreamProtoResultReporter | An implementation of ProtoResultReporter |
StreamUtil | Utility class for managing input streams. |
StrictShardHelper | Sharding strategy to create strict shards that do not report together, |
StringEscapeUtils | Utility class for escaping strings for specific formats. |
StringUtil | Utility class for escaping strings for common string manipulation. |
StubBuildProvider | No-op empty implementation of a IBuildProvider . |
StubDevice | Stub placeholder implementation of a IDevice . |
StubKeyStoreClient | KeyStore क्लाइंट के लिए डिफ़ॉल्ट स्टब कार्यान्वयन। |
StubKeyStoreFactory | Default stub implementation for KeyStore Factory |
स्टबलोकलएंड्रॉयडवर्चुअलडिवाइस | DeviceSelectionOptions.localVirtualDeviceRequested() के true होने पर आवंटित करने के लिए DeviceManager द्वारा उपयोग किया जाने वाला एक प्लेसहोल्डर IDevice |
StubMultiTargetPreparer | Placeholder empty implementation of a IMultiTargetPreparer . |
StubTargetPreparer | Placeholder empty implementation of a ITargetPreparer . |
StubTest | No-op empty test implementation. |
StubTestRunListener | Stub implementation of ITestRunListener |
SubprocessCommandException | A subprocess command failed to run. |
SubprocessConfigBuilder | Build a wrapper TF config XML for an existing TF config. |
SubprocessEventHelper | Helper to serialize/deserialize the events to be passed to the log. |
SubprocessEventHelper.BaseTestEventInfo | Base Helper for TestIgnored information. |
SubprocessEventHelper.FailedTestEventInfo | Helper for testFailed information. |
SubprocessEventHelper.InvocationEndedEventInfo | Helper for invocation ended information. |
SubprocessEventHelper.InvocationFailedEventInfo | Helper for InvocationFailed information. |
SubprocessEventHelper.InvocationStartedEventInfo | Helper for invocation started information. |
SubprocessEventHelper.LogAssociationEventInfo | Helper for logAssociation information. |
SubprocessEventHelper.TestEndedEventInfo | Helper for testEnded information. |
SubprocessEventHelper.TestLogEventInfo | Helper for testLog information. |
SubprocessEventHelper.TestModuleStartedEventInfo | Helper for test module started information. |
SubprocessEventHelper.TestRunEndedEventInfo | Helper for testRunEnded Information. |
SubprocessEventHelper.TestRunFailedEventInfo | Helper for testRunFailed information |
SubprocessEventHelper.TestRunStartedEventInfo | Helper for testRunStarted information |
SubprocessEventHelper.TestStartedEventInfo | Helper for testStarted information |
SubprocessExceptionParser | Helper to handle the exception output from standard Tradefed command runners. |
SubprocessReportingHelper | A class to build a wrapper configuration file to use subprocess results reporter for a cluster command. |
SubprocessResultsReporter | Implements ITestInvocationListener to be specified as a result_reporter and forward from the subprocess the results of tests, test runs, test invocations. |
SubprocessTestResultsParser | Extends ERROR(/FileOutputStream) to parse the output before writing to the file so we can generate the test events on the launcher side. |
SubprocessTestResultsParser.StatusKeys | Relevant test status keys. |
SubprocessTfLauncher | A IRemoteTest for running tests against a separate TF installation. |
SuiteApkInstaller | Installs specified APKs for Suite configuration: either from $ANDROID_TARGET_OUT_TESTCASES variable or the ROOT_DIR in build info. |
SuiteModuleLoader | Retrieves Compatibility test module definitions from the repository. |
SuiteModuleLoader.ConfigFilter | A ERROR(/FilenameFilter) to find all the config files in a directory. |
सुइट परिणाम धारक | हेल्पर ऑब्जेक्ट को क्रमबद्ध करने और मंगलाचरण परिणामों को डीरियलाइज़ करने में आसानी होती है। |
सुइट परिणाम रिपोर्टर | एक संपूर्ण सूट आमंत्रण के लिए परीक्षा परिणाम एकत्र करें और अंतिम परिणाम आउटपुट करें। |
SuiteResultReporter.ModulePrepTimes | एक मॉड्यूल की तैयारी और फाड़ने के समय के लिए वस्तु धारक। |
SuiteTestFilter | Represents a filter for including and excluding tests. |
SwitchUserTargetPreparer | A ITargetPreparer that switches to the specified user kind in setUp. |
SystemServerFileDescriptorChecker | Checks if system server appears to be running out of FDs. |
SystemServerStatusChecker | Check if the pid of system_server has changed from before and after a module run. |
SystemUpdaterDeviceFlasher | A IDeviceFlasher that relies on the system updater to install a system image bundled in a OTA update package. |
SystemUtil | Utility class for making system calls. |
SystemUtil.EnvVariable | |
TableBuilder | Helper class to display a matrix of String elements in a table. |
TableFormatter | Helper class to display a matrix of String elements so each element column is lined up |
TargetSetupError | A fatal error occurred while preparing the target for testing. |
TarUtil | Utility to manipulate a tar file. |
TcpDevice | DeviceSelectionOptions.tcpDeviceRequested() के true होने पर आवंटित करने के लिए DeviceManager द्वारा उपयोग किया जाने वाला एक प्लेसहोल्डर IDevice |
TearDownPassThroughPreparer | Allows for running tearDown on preparers that are included in a config as an object. |
TelephonyHelper | A utility to use and get information related to the telephony. |
TelephonyHelper.SimCardInformation | An information holder for the sim card related information. |
TelephonyTokenProvider | Token provider for telephony related tokens. |
TemperatureThrottlingWaiter | एक ITargetPreparer जो तब तक प्रतीक्षा करता है जब तक डिवाइस का तापमान लक्ष्य तक कम नहीं हो जाता |
TemplateResolutionError | Class extending ConfigurationException for template related error during configuration parsing. |
TerribleFailureEmailHandler | A simple handler class that sends an email to interested people when a WTF (What a Terrible Failure) error occurs within a Trade Federation instance. |
TestAppInstallSetup | A ITargetPreparer that installs one or more apps from a IDeviceBuildInfo.getTestsDir() folder onto device. |
TestContext | A class to model a TestContext message of TFC API. |
TestDependencyResolver | Helper to resolve dependencies if needed. |
TestDescription | Class representing information about a test case. |
TestDescriptionsFile | A utility class for marshalling and unmarshalling a list of TestDescriptions to a test file. |
TestDevice | Implementation of a ITestDevice for a full stack android device |
TestDevice.MicrodroidBuilder | A builder used to create a Microdroid TestDevice. |
TestDeviceOptions | Container for ITestDevice Option s |
TestDeviceOptions.InstanceType | |
TestDeviceState | A more fully featured representation of device state than DeviceState . |
TestEnvironment | A class to model a TestEnvironment message returned by TFC API. |
TestErrorIdentifier | Error identifier from tests and tests runners. |
TestFailureListener | Listener used to take action such as screenshot, bugreport, logcat collection upon a test failure when requested. |
TestFailureModuleController | Controller for module that simply want to tune how the tests failures log collected are behaving. |
TestFilePushSetup | A ITargetPreparer that pushes one or more files/dirs from a IDeviceBuildInfo.getTestsDir() folder onto device. |
TestFilterHelper | Helper class for filtering tests |
TestGroupStatus | A class to store status of a test group. |
TestInfo | Stores the test information set in a TEST_MAPPING file. |
परीक्षण सूचना | होल्डर ऑब्जेक्ट जिसमें सभी जानकारी और निर्भरताएँ होती हैं, एक परीक्षण धावक या परीक्षण को ठीक से निष्पादित करने की आवश्यकता हो सकती है। |
टेस्टइन्फॉर्मेशन।बिल्डर | एक TestInformation इंस्टेंस बनाने के लिए बिल्डर। |
टेस्ट आमंत्रण | ITestInvocation का डिफ़ॉल्ट कार्यान्वयन। |
टेस्टइनवोकेशन।रनमोड | एक आमंत्रण जिस अलग मोड में चल सकता है। |
टेस्टइनवोकेशन।स्टेज | |
TestInvocationManagementServer | GRPC server helping to management test invocation and their lifecycle. |
TestMapping | A class for loading a TEST_MAPPING file. |
TestMappingSuiteRunner | Implementation of BaseTestSuite to run tests specified by option include-filter, or TEST_MAPPING files from build, as a suite. |
TestOption | Stores the test option details set in a TEST_MAPPING file. |
TestOutputUploader | Uploads test output files to local file system, GCS, or an HTTP(S) endpoint. |
TestRecordInterpreter | Utility to convert a TestRecord proto into a more easily manipulable format in Tradefed. |
TestRecordProtoUtil | Utility to read the TestRecord proto from a file. |
TestResource | टीएफसी एपीआई द्वारा लौटाए गए टेस्ट रिसोर्स संदेश को मॉडल करने के लिए एक वर्ग। |
TestResourceDownloader | A class to download test resource files from file system/GCS/HTTP. |
TestResult | Container for a result of a single test. |
TestResultListener | A simplification of ITestLifecycleListener for implementers that only care about individual test results. |
TestRunResult | Holds results from a single test run. |
TestRunToTestInvocationForwarder | Forwarder from ddmlib ITestRunListener to ITestLifeCycleReceiver . |
TestsPoolPoller | Tests wrapper that allow to execute all the tests of a pool of tests. |
TestSuiteInfo | A class that resolves loading of build related metadata for test suite To properly expose related info, a test suite must include a test-suite-info.properties file in its jar resources |
TestSummary | A class to represent a test summary. |
TestSummary.Type | |
TestSummary.TypedString | |
TestSystemAppInstallSetup | A ITargetPreparer that installs one or more apps from a IDeviceBuildInfo.getTestsDir() folder onto the /system partition on device. |
TestTimeoutEnforcer | Listeners that allows to check the execution time of a given test case and fail it if it goes over a given timeout. |
TextResultReporter | A test result reporter that forwards results to the JUnit text result printer. |
TfMetricProtoUtil | Utility class to help with the Map to Map transition. |
TfObjectTracker | A utility to track the usage of the different Trade Fedederation objects. |
TfSuiteRunner | Implementation of ITestSuite which will load tests from TF jars res/config/suite/ folder. |
TfTestLauncher | A IRemoteTest for running unit or functional tests against a separate TF installation. |
TimeStatusChecker | Status checker to ensure that the device and host time are kept in sync. |
TimeUtil | Contains time related utility methods. |
TimeVal | This is a sentinel type which wraps a Long . |
TimeWaster | A simple target preparer to waste time and potentially restart the device. |
TokenProperty | Supported token with dynamic sharding. |
TokenProviderHelper | Helper that gives the provider associated to a particular token, in order to find out if a device supports the token. |
ट्रेस सीएमडी कलेक्टर | एक IMetricCollector जो ट्रेस-cmd का उपयोग करके परीक्षण के दौरान निशान एकत्र करता है, और उन्हें आमंत्रण में लॉग करता है। |
TradefedConfigObject | A class to model a TradefedConfigObject message of TFC API. |
TradefedConfigObject.Type | A list of configuration object types which can be injected to a cluster command config. |
TradefedDelegator | Objects that helps delegating the invocation to another Tradefed binary. |
TradefedFeatureClient | A grpc client to request feature execution from the server. |
TradefedFeatureServer | A server that responds to requests for triggering features. |
TradefedSandbox | Sandbox container that can run a Trade Federation invocation. |
TradefedSandboxFactory | Default implementation for SandboxFactory |
TradefedSandboxRunner | Runner associated with a TradefedSandbox that will allow executing the sandbox. |
TradefedSandboxRunner.StubScheduledInvocationListener | A stub IScheduledInvocationListener that does nothing. |