অ্যান্ড্রয়েড 11 সামঞ্জস্যের সংজ্ঞা

1। পরিচিতি

ডিভাইসগুলিকে Android 11-এর সাথে সামঞ্জস্যপূর্ণ হওয়ার জন্য এই দস্তাবেজটি প্রয়োজনীয়তাগুলি গণনা করে যা অবশ্যই পূরণ করতে হবে৷

"অবশ্যই", "অবশ্যই নয়", "প্রয়োজনীয়", "করতে হবে", "উচিত নয়", "উচিত নয়", "প্রস্তাবিত", "মেয়", এবং "ঐচ্ছিক"-এর ব্যবহার IETF অনুযায়ী মান RFC2119 এ সংজ্ঞায়িত করা হয়েছে।

এই নথিতে যেমন ব্যবহার করা হয়েছে, একজন "ডিভাইস ইমপ্লিমেন্টার" বা "ইমপ্লিমেন্টার" হল একজন ব্যক্তি বা সংস্থা যা Android 11 চালিত একটি হার্ডওয়্যার/সফ্টওয়্যার সলিউশন ডেভেলপ করছে৷ একটি "ডিভাইস ইমপ্লিমেন্টেশন" বা "ইমপ্লিমেন্টেশন" হল হার্ডওয়্যার/সফ্টওয়্যার সমাধান।

অ্যান্ড্রয়েড 11-এর সাথে সামঞ্জস্যপূর্ণ বলে বিবেচিত হতে, ডিভাইস বাস্তবায়নকে অবশ্যই এই সামঞ্জস্যতার সংজ্ঞায় উপস্থাপিত প্রয়োজনীয়তাগুলি পূরণ করতে হবে, রেফারেন্সের মাধ্যমে অন্তর্ভুক্ত করা যেকোনো নথি সহ।

যেখানে এই সংজ্ঞা বা বিভাগ 10- এ বর্ণিত সফ্টওয়্যার পরীক্ষাগুলি নীরব, অস্পষ্ট বা অসম্পূর্ণ, সেখানে বিদ্যমান বাস্তবায়নের সাথে সামঞ্জস্যতা নিশ্চিত করা ডিভাইস বাস্তবায়নকারীর দায়িত্ব৷

এই কারণে, অ্যান্ড্রয়েড ওপেন সোর্স প্রকল্পটি অ্যান্ড্রয়েডের রেফারেন্স এবং পছন্দসই বাস্তবায়ন উভয়ই। Android ওপেন সোর্স প্রজেক্ট থেকে উপলব্ধ "আপস্ট্রিম" সোর্স কোডের উপর সম্ভাব্য সর্বাধিক পরিমাণে তাদের বাস্তবায়নের ভিত্তি করার জন্য ডিভাইস বাস্তবায়নকারীদের দৃঢ়ভাবে সুপারিশ করা হয়। যদিও কিছু উপাদান অনুমানমূলকভাবে বিকল্প বাস্তবায়নের সাথে প্রতিস্থাপিত হতে পারে, তবে এই অনুশীলনটি অনুসরণ না করার জন্য দৃঢ়ভাবে সুপারিশ করা হয়, কারণ সফ্টওয়্যার পরীক্ষায় উত্তীর্ণ হওয়া যথেষ্ট কঠিন হয়ে পড়বে। সামঞ্জস্য পরীক্ষা স্যুট সহ এবং এর বাইরেও আদর্শ Android বাস্তবায়নের সাথে সম্পূর্ণ আচরণগত সামঞ্জস্য নিশ্চিত করা বাস্তবায়নকারীর দায়িত্ব। পরিশেষে, মনে রাখবেন যে কিছু উপাদান প্রতিস্থাপন এবং পরিবর্তনগুলি এই নথি দ্বারা স্পষ্টভাবে নিষিদ্ধ।

এই নথিতে লিঙ্ক করা অনেক সংস্থানই প্রত্যক্ষ বা পরোক্ষভাবে Android SDK থেকে প্রাপ্ত এবং সেই SDK-এর ডকুমেন্টেশনের তথ্যের সাথে কার্যকরীভাবে অভিন্ন হবে৷ যে কোনো ক্ষেত্রে যেখানে এই সামঞ্জস্যতা সংজ্ঞা বা সামঞ্জস্য পরীক্ষা স্যুট SDK ডকুমেন্টেশনের সাথে একমত নয়, SDK ডকুমেন্টেশনকে প্রামাণিক বলে মনে করা হয়। এই নথি জুড়ে সংযুক্ত সংস্থানগুলিতে প্রদত্ত যে কোনও প্রযুক্তিগত বিশদ এই সামঞ্জস্যতার সংজ্ঞার অংশ হিসাবে অন্তর্ভুক্তির দ্বারা বিবেচনা করা হয়।

1.1 নথির কাঠামো

1.1.1। ডিভাইসের ধরন অনুসারে প্রয়োজনীয়তা

বিভাগ 2 এ সমস্ত প্রয়োজনীয়তা রয়েছে যা একটি নির্দিষ্ট ডিভাইসের প্রকারের জন্য প্রযোজ্য। সেকশন 2- এর প্রতিটি উপধারা একটি নির্দিষ্ট ডিভাইসের জন্য নিবেদিত।

অন্যান্য সমস্ত প্রয়োজনীয়তা, যা সার্বজনীনভাবে যেকোনো Android ডিভাইস বাস্তবায়নের ক্ষেত্রে প্রযোজ্য, বিভাগ 2- এর পরে বিভাগে তালিকাভুক্ত করা হয়েছে। এই প্রয়োজনীয়তাগুলি এই নথিতে "মূল প্রয়োজনীয়তা" হিসাবে উল্লেখ করা হয়েছে৷

1.1.2। প্রয়োজনীয় আইডি

প্রয়োজনীয় আইডি আবশ্যক প্রয়োজনীয়তার জন্য বরাদ্দ করা হয়.

  • আইডি শুধুমাত্র আবশ্যক প্রয়োজনীয়তার জন্য বরাদ্দ করা হয়.
  • দৃঢ়ভাবে সুপারিশকৃত প্রয়োজনীয়তাগুলিকে [SR] হিসাবে চিহ্নিত করা হয়েছে কিন্তু আইডি বরাদ্দ করা হয়নি৷
  • আইডিতে রয়েছে: ডিভাইস টাইপ আইডি - কন্ডিশন আইডি - প্রয়োজনীয় আইডি (যেমন C-0-1)।

প্রতিটি আইডি নিম্নরূপ সংজ্ঞায়িত করা হয়:

  • ডিভাইস টাইপ আইডি ( 2-এ আরও দেখুন। ডিভাইসের ধরন )
    • সি: কোর (কোনও অ্যান্ড্রয়েড ডিভাইস বাস্তবায়নে প্রযোজ্য প্রয়োজনীয়তা)
    • H: অ্যান্ড্রয়েড হ্যান্ডহেল্ড ডিভাইস
    • টি: অ্যান্ড্রয়েড টেলিভিশন ডিভাইস
    • উত্তর: অ্যান্ড্রয়েড অটোমোটিভ বাস্তবায়ন
    • W: অ্যান্ড্রয়েড ওয়াচ বাস্তবায়ন
    • ট্যাব: অ্যান্ড্রয়েড ট্যাবলেট বাস্তবায়ন
  • কন্ডিশন আইডি
    • যখন প্রয়োজনীয়তা নিঃশর্ত হয়, তখন এই আইডিটি 0 হিসাবে সেট করা হয়।
    • যখন প্রয়োজনীয়তা শর্তসাপেক্ষ হয়, তখন ১ম শর্তের জন্য 1 বরাদ্দ করা হয় এবং একই বিভাগে এবং একই ডিভাইসের প্রকারের মধ্যে সংখ্যাটি 1 দ্বারা বৃদ্ধি পায়।
  • প্রয়োজনীয় আইডি
    • এই আইডিটি 1 থেকে শুরু হয় এবং একই বিভাগে এবং একই অবস্থার মধ্যে 1 দ্বারা বৃদ্ধি পায়।

1.1.3। ধারা 2-এ প্রয়োজনীয় আইডি

অনুচ্ছেদ 2- এ প্রয়োজনীয় আইডিটি সংশ্লিষ্ট বিভাগ আইডি দিয়ে শুরু হয় যা উপরে বর্ণিত প্রয়োজনীয় আইডি দ্বারা অনুসরণ করা হয়।

  • বিভাগ 2- এর আইডিতে রয়েছে: বিভাগ আইডি/ডিভাইস টাইপ আইডি - কন্ডিশন আইডি - প্রয়োজনীয় আইডি (যেমন 7.4.3/A-0-1)।

2. ডিভাইসের ধরন

যদিও অ্যান্ড্রয়েড ওপেন সোর্স প্রজেক্ট একটি সফ্টওয়্যার স্ট্যাক প্রদান করে যা বিভিন্ন ধরনের ডিভাইস এবং ফর্ম ফ্যাক্টরগুলির জন্য ব্যবহার করা যেতে পারে, সেখানে কয়েকটি ডিভাইসের ধরন রয়েছে যেগুলির একটি অপেক্ষাকৃত ভাল প্রতিষ্ঠিত অ্যাপ্লিকেশন বিতরণ বাস্তুতন্ত্র রয়েছে৷

এই বিভাগে সেই ডিভাইসের প্রকারগুলি এবং প্রতিটি ডিভাইসের প্রকারের জন্য প্রযোজ্য অতিরিক্ত প্রয়োজনীয়তা এবং সুপারিশগুলি বর্ণনা করে৷

সমস্ত অ্যান্ড্রয়েড ডিভাইস বাস্তবায়ন যেগুলি বর্ণিত ডিভাইসের প্রকারগুলির মধ্যে মাপসই করে না, এখনও এই সামঞ্জস্যতার সংজ্ঞার অন্যান্য বিভাগে সমস্ত প্রয়োজনীয়তা পূরণ করতে হবে৷

2.1 ডিভাইস কনফিগারেশন

ডিভাইসের ধরন অনুসারে হার্ডওয়্যার কনফিগারেশনের প্রধান পার্থক্যগুলির জন্য, এই বিভাগে অনুসরণ করা ডিভাইস-নির্দিষ্ট প্রয়োজনীয়তাগুলি দেখুন।

2.2। হ্যান্ডহেল্ড প্রয়োজনীয়তা

একটি অ্যান্ড্রয়েড হ্যান্ডহেল্ড ডিভাইস একটি অ্যান্ড্রয়েড ডিভাইস বাস্তবায়নকে বোঝায় যা সাধারণত এটিকে হাতে ধরে রাখার দ্বারা ব্যবহৃত হয়, যেমন একটি mp3 প্লেয়ার, ফোন বা ট্যাবলেট।

Android ডিভাইস বাস্তবায়নকে হ্যান্ডহেল্ড হিসাবে শ্রেণীবদ্ধ করা হয় যদি তারা নিম্নলিখিত সমস্ত মানদণ্ড পূরণ করে:

  • একটি শক্তির উৎস আছে যা গতিশীলতা প্রদান করে, যেমন একটি ব্যাটারি।
  • 3.3 ইঞ্চি (অথবা Android 11-এর আগে API লেভেলে চালু হওয়া ডিভাইসগুলির জন্য 2.5 ইঞ্চি) থেকে 8 ইঞ্চি পরিসরে একটি শারীরিক তির্যক পর্দার আকার থাকতে হবে।

এই বিভাগের বাকি অতিরিক্ত প্রয়োজনীয়তাগুলি Android হ্যান্ডহেল্ড ডিভাইস বাস্তবায়নের জন্য নির্দিষ্ট।

দ্রষ্টব্য: Android ট্যাবলেট ডিভাইসগুলিতে প্রযোজ্য নয় এমন প্রয়োজনীয়তাগুলি একটি * দিয়ে চিহ্নিত করা হয়েছে৷

2.2.1। হার্ডওয়্যার

হ্যান্ডহেল্ড ডিভাইস বাস্তবায়ন:

  • [ 7.1 .1.1/H-0-1] কমপক্ষে একটি Android-সামঞ্জস্যপূর্ণ ডিসপ্লে থাকতে হবে যা এই নথিতে বর্ণিত সমস্ত প্রয়োজনীয়তা পূরণ করে৷
  • [ 7.1 .1.3/H-SR] ব্যবহারকারীদের ডিসপ্লের আকার (স্ক্রীনের ঘনত্ব) পরিবর্তন করার জন্য একটি সামর্থ্য প্রদানের জন্য দৃঢ়ভাবে সুপারিশ করা হয়।

যদি হ্যান্ডহেল্ড ডিভাইস বাস্তবায়ন সফ্টওয়্যার স্ক্রিন ঘূর্ণন সমর্থন করে, তারা:

  • [ 7.1 .1.1/H-1-1]* তৃতীয় পক্ষের অ্যাপ্লিকেশনের জন্য উপলব্ধ করা যৌক্তিক স্ক্রিনটি ছোট প্রান্তে কমপক্ষে 2 ইঞ্চি এবং দীর্ঘ প্রান্তে 2.7 ইঞ্চি হতে হবে। এই নথির আগে একটি API স্তরে চালু হওয়া ডিভাইসগুলিকে এই প্রয়োজনীয়তা থেকে অব্যাহতি দেওয়া হয়েছে৷

যদি হ্যান্ডহেল্ড ডিভাইস বাস্তবায়ন সফ্টওয়্যার স্ক্রিন ঘূর্ণন সমর্থন না করে, তারা:

  • [ 7.1 .1.1/H-2-1]* তৃতীয় পক্ষের অ্যাপ্লিকেশনের জন্য উপলব্ধ লজিক্যাল স্ক্রীনটি অবশ্যই ছোট প্রান্তে কমপক্ষে 2.7 ইঞ্চি হতে হবে। এই নথির আগে একটি API স্তরে চালু হওয়া ডিভাইসগুলিকে এই প্রয়োজনীয়তা থেকে অব্যাহতি দেওয়া হয়েছে৷

যদি হ্যান্ডহেল্ড ডিভাইস বাস্তবায়ন Configuration.isScreenHdr() এর মাধ্যমে উচ্চ গতিশীল পরিসর প্রদর্শনের জন্য সমর্থন দাবি করে, তারা:

  • [ 7.1 .4.5/H-1-1] EGL_EXT_gl_colorspace_bt2020_pq , EGL_EXT_surface_SMPTE2086_metadata , EGL_EXT_surface_CTA861_3_metadata , VEX_colorspace, VK_EXT_swapchain_colorspace এবং VK_EXT_hdr_metadata মেটাডেটা এক্সটেনশন।

হ্যান্ডহেল্ড ডিভাইস বাস্তবায়ন:

  • [ 7.1 .4.6/H-0-1] ডিভাইসটি একটি সিস্টেম সম্পত্তি graphics.gpu.profiler.support মাধ্যমে GPU প্রোফাইলিং ক্ষমতা সমর্থন করে কিনা তা অবশ্যই রিপোর্ট করতে হবে।

যদি হ্যান্ডহেল্ড ডিভাইস বাস্তবায়ন একটি সিস্টেম সম্পত্তি graphics.gpu.profiler.support এর মাধ্যমে সমর্থন ঘোষণা করে, তারা:

হ্যান্ডহেল্ড ডিভাইস বাস্তবায়ন:

  • [ 7.1 .5/H-0-1] আপস্ট্রিম অ্যান্ড্রয়েড ওপেন সোর্স কোড দ্বারা বাস্তবায়িত লিগ্যাসি অ্যাপ্লিকেশন সামঞ্জস্য মোডের জন্য সমর্থন অন্তর্ভুক্ত করা আবশ্যক। অর্থাৎ, ডিভাইস বাস্তবায়নের ট্রিগার বা থ্রেশহোল্ডগুলিকে পরিবর্তন করা উচিত নয় যেখানে সামঞ্জস্য মোড সক্রিয় করা হয় এবং সামঞ্জস্য মোডের আচরণকে পরিবর্তন করা উচিত নয়।
  • [ 7.2 .1/H-0-1] থার্ড-পার্টি ইনপুট মেথড এডিটর (IME) অ্যাপ্লিকেশনের জন্য সমর্থন অন্তর্ভুক্ত করা আবশ্যক।
  • [ 7.2 .3/H-0-3] হোম স্ক্রীন প্রদান করে এমন সমস্ত Android-সামঞ্জস্যপূর্ণ ডিসপ্লেতে অবশ্যই হোম ফাংশন প্রদান করতে হবে।
  • [ 7.2 .3/H-0-4] সমস্ত অ্যান্ড্রয়েড-সামঞ্জস্যপূর্ণ ডিসপ্লেতে ব্যাক ফাংশন এবং অন্তত একটি অ্যান্ড্রয়েড-সামঞ্জস্যপূর্ণ ডিসপ্লেতে সাম্প্রতিক ফাংশন প্রদান করতে হবে।
  • [ 7.2 .3/H-0-2] ব্যাক ফাংশন ( KEYCODE_BACK ) এর স্বাভাবিক এবং দীর্ঘ প্রেস ইভেন্ট উভয়ই ফোরগ্রাউন্ড অ্যাপ্লিকেশনে পাঠাতে হবে। এই ইভেন্টগুলি অবশ্যই সিস্টেম দ্বারা গ্রাস করা উচিত নয় এবং অ্যান্ড্রয়েড ডিভাইসের বাইরের দ্বারা ট্রিগার করা যেতে পারে (যেমন অ্যান্ড্রয়েড ডিভাইসের সাথে সংযুক্ত বাহ্যিক হার্ডওয়্যার কীবোর্ড)।
  • [ 7.2 .4/H-0-1] টাচস্ক্রিন ইনপুট সমর্থন করতে হবে।
  • [ 7.2 .4/H-SR] ব্যবহারকারী-নির্বাচিত সহায়তা অ্যাপ চালু করার জন্য দৃঢ়ভাবে সুপারিশ করা হয়, অন্য কথায় যে অ্যাপটি VoiceInteractionService প্রয়োগ করে, অথবা KEYCODE_MEDIA_PLAY_PAUSE বা KEYCODE_HEADSETHOOK এর জন্য OK HEADSET-এর জন্য সক্রিয় না হলে KEYCODE_MEDIA_PLAY_PAUSE-এর দীর্ঘ-চাপে ACTION_ASSIST পরিচালনা করার কার্যকলাপ যারা দীর্ঘ প্রেস ইভেন্ট পরিচালনা.
  • [ 7.3 .1/H-SR] একটি 3-অক্ষ অ্যাক্সিলোমিটার অন্তর্ভুক্ত করার জন্য দৃঢ়ভাবে সুপারিশ করা হয়।

যদি হ্যান্ডহেল্ড ডিভাইস বাস্তবায়নে একটি 3-অক্ষ অ্যাক্সিলোমিটার অন্তর্ভুক্ত থাকে, তারা:

  • [ 7.3 .1/H-1-1] কমপক্ষে 100 Hz ফ্রিকোয়েন্সি পর্যন্ত ইভেন্ট রিপোর্ট করতে সক্ষম হতে হবে।

যদি হ্যান্ডহেল্ড ডিভাইস বাস্তবায়নে একটি GPS/GNSS রিসিভার অন্তর্ভুক্ত থাকে এবং android.hardware.location.gps বৈশিষ্ট্য পতাকার মাধ্যমে অ্যাপ্লিকেশনগুলির সক্ষমতা সম্পর্কে রিপোর্ট করে, তারা:

  • [ 7.3 .3/H-2-1] GNSS পরিমাপগুলি পাওয়া মাত্রই রিপোর্ট করতে হবে, এমনকি যদি GPS/GNSS থেকে গণনা করা কোনো অবস্থান এখনও রিপোর্ট করা না হয়।
  • [ 7.3 .3/H-2-2] জিএনএসএস সিউডোরেঞ্জ এবং সিউডোরেঞ্জ রেটগুলি অবশ্যই রিপোর্ট করতে হবে, যে, অবস্থান নির্ণয় করার পরে খোলা আকাশের অবস্থায়, স্থির বা ত্বরণের প্রতি সেকেন্ডে 0.2 মিটারের কম গতিতে চলাকালীন, গণনা করার জন্য যথেষ্ট 20 মিটারের মধ্যে অবস্থান, এবং গতি প্রতি সেকেন্ডে 0.2 মিটারের মধ্যে, অন্তত 95% সময়ের মধ্যে।

যদি হ্যান্ডহেল্ড ডিভাইস বাস্তবায়নে একটি 3-অক্ষ জাইরোস্কোপ অন্তর্ভুক্ত থাকে, তারা:

  • [ 7.3 .4/H-3-1] কমপক্ষে 100 Hz ফ্রিকোয়েন্সি পর্যন্ত ইভেন্ট রিপোর্ট করতে সক্ষম হতে হবে।
  • [ 7.3 .4/H-3-2] প্রতি সেকেন্ডে 1000 ডিগ্রি পর্যন্ত অভিযোজন পরিবর্তন পরিমাপ করতে সক্ষম হতে হবে।

হ্যান্ডহেল্ড ডিভাইস বাস্তবায়ন যা একটি ভয়েস কল করতে পারে এবং getPhoneTypePHONE_TYPE_NONE ছাড়া অন্য কোনো মান নির্দেশ করতে পারে:

  • [ 7.3 .8/H] একটি প্রক্সিমিটি সেন্সর অন্তর্ভুক্ত করা উচিত।

হ্যান্ডহেল্ড ডিভাইস বাস্তবায়ন:

  • [ 7.3 .11/H-SR] 6 ডিগ্রি স্বাধীনতা সহ পোজ সেন্সর সমর্থন করার জন্য সুপারিশ করা হয়।
  • [ 7.4 .3/H] ব্লুটুথ এবং ব্লুটুথ LE সমর্থন অন্তর্ভুক্ত করা উচিত।

যদি হ্যান্ডহেল্ড ডিভাইস বাস্তবায়নে একটি মিটারযুক্ত সংযোগ অন্তর্ভুক্ত থাকে, তারা:

  • [ 7.4 .7/H-1-1] অবশ্যই ডেটা সেভার মোড প্রদান করতে হবে।

যদি হ্যান্ডহেল্ড ডিভাইস বাস্তবায়নে একটি লজিক্যাল ক্যামেরা ডিভাইস থাকে যা CameraMetadata.REQUEST_AVAILABLE_CAPABILITIES_LOGICAL_MULTI_CAMERA ব্যবহার করে ক্ষমতা তালিকাভুক্ত করে, তারা:

  • [ 7.5 .4/H-1-1] ডিফল্টরূপে স্বাভাবিক ক্ষেত্র অফ ভিউ (FOV) থাকতে হবে এবং এটি অবশ্যই 50 থেকে 90 ডিগ্রির মধ্যে হতে হবে।

হ্যান্ডহেল্ড ডিভাইস বাস্তবায়ন:

  • [ 7.6 .1/H-0-1] অ্যাপ্লিকেশন প্রাইভেট ডেটা (ওরফে "/ডেটা" পার্টিশন) এর জন্য কমপক্ষে 4 গিগাবাইট অ-উদ্বায়ী স্টোরেজ উপলব্ধ থাকতে হবে।
  • [ 7.6 .1/H-0-2] ActivityManager.isLowRamDevice() এর জন্য "সত্য" ফেরত দিতে হবে যখন কার্নেল এবং ইউজারস্পেসে 1GB-এর কম মেমরি উপলব্ধ থাকে।

যদি হ্যান্ডহেল্ড ডিভাইস বাস্তবায়ন শুধুমাত্র একটি 32-বিট ABI সমর্থন ঘোষণা করে:

  • [ 7.6 .1/H-1-1] ডিফল্ট ডিসপ্লে qHD (যেমন FWVGA) পর্যন্ত ফ্রেমবাফার রেজোলিউশন ব্যবহার করলে কার্নেল এবং ইউজারস্পেসে উপলব্ধ মেমরি কমপক্ষে 416MB হতে হবে।

  • [ 7.6 .1/H-2-1] ডিফল্ট ডিসপ্লে HD+ (যেমন HD, WSVGA) পর্যন্ত ফ্রেমবাফার রেজোলিউশন ব্যবহার করলে কার্নেল এবং ইউজারস্পেসে উপলব্ধ মেমরিটি কমপক্ষে 592MB হতে হবে।

  • [ 7.6 .1/H-3-1] ডিফল্ট ডিসপ্লে FHD (যেমন WSXGA+) পর্যন্ত ফ্রেমবাফার রেজোলিউশন ব্যবহার করলে কার্নেল এবং ইউজারস্পেসে উপলব্ধ মেমরি কমপক্ষে 896MB হতে হবে।

  • [ 7.6 .1/H-4-1] ডিফল্ট ডিসপ্লে QHD (যেমন QWXGA) পর্যন্ত ফ্রেমবাফার রেজোলিউশন ব্যবহার করলে কার্নেল এবং ইউজারস্পেসে উপলব্ধ মেমরিটি কমপক্ষে 1344MB হতে হবে।

যদি হ্যান্ডহেল্ড ডিভাইস বাস্তবায়ন কোনো 64-বিট ABI সমর্থন ঘোষণা করে (কোনও 32-বিট ABI সহ বা ছাড়া):

  • [ 7.6 .1/H-5-1] ডিফল্ট ডিসপ্লে qHD (যেমন FWVGA) পর্যন্ত ফ্রেমবাফার রেজোলিউশন ব্যবহার করলে কার্নেল এবং ইউজারস্পেসে উপলব্ধ মেমরি কমপক্ষে 816MB হতে হবে।

  • [ 7.6 .1/H-6-1] ডিফল্ট ডিসপ্লে HD+ (যেমন HD, WSVGA) পর্যন্ত ফ্রেমবাফার রেজোলিউশন ব্যবহার করলে কার্নেল এবং ইউজারস্পেসে উপলব্ধ মেমরি কমপক্ষে 944MB হতে হবে।

  • [ 7.6 .1/H-7-1] ডিফল্ট ডিসপ্লে FHD (যেমন WSXGA+) পর্যন্ত ফ্রেমবাফার রেজোলিউশন ব্যবহার করলে কার্নেল এবং ইউজারস্পেসে উপলব্ধ মেমরি কমপক্ষে 1280MB হতে হবে।

  • [ 7.6 .1/H-8-1] ডিফল্ট ডিসপ্লে QHD (যেমন QWXGA) পর্যন্ত ফ্রেমবাফার রেজোলিউশন ব্যবহার করলে কার্নেল এবং ইউজারস্পেসে উপলব্ধ মেমরিটি কমপক্ষে 1824MB হতে হবে।

উল্লেখ্য যে উপরের "কার্নেল এবং ব্যবহারকারীর স্থানের জন্য উপলব্ধ মেমরি" রেডিও, ভিডিও ইত্যাদির মতো হার্ডওয়্যার উপাদানগুলির জন্য নিবেদিত যে কোনও মেমরি ছাড়াও প্রদত্ত মেমরি স্পেসকে বোঝায় যা ডিভাইস বাস্তবায়নে কার্নেলের নিয়ন্ত্রণে নেই।

যদি হ্যান্ডহেল্ড ডিভাইস বাস্তবায়নে কার্নেল এবং ইউজারস্পেসে উপলব্ধ 1GB এর কম বা সমান মেমরি থাকে, তারা:

  • [ 7.6 .1/H-9-1] ফিচার পতাকা android.hardware.ram.low ঘোষণা করতে হবে।
  • [ 7.6 .1/H-9-2] অ্যাপ্লিকেশন প্রাইভেট ডেটা (ওরফে "/ডেটা" পার্টিশন) এর জন্য কমপক্ষে 1.1 গিগাবাইট অ-উদ্বায়ী স্টোরেজ থাকতে হবে।

যদি হ্যান্ডহেল্ড ডিভাইস বাস্তবায়নে কার্নেল এবং ইউজারস্পেসে উপলব্ধ 1GB-এর বেশি মেমরি অন্তর্ভুক্ত থাকে, তারা:

  • [ 7.6 .1/H-10-1] অ্যাপ্লিকেশন প্রাইভেট ডেটা (ওরফে "/ডেটা" পার্টিশন) এর জন্য কমপক্ষে 4GB অ-উদ্বায়ী স্টোরেজ উপলব্ধ থাকতে হবে।
  • android.hardware.ram.normal বৈশিষ্ট্য পতাকা ঘোষণা করা উচিত।

হ্যান্ডহেল্ড ডিভাইস বাস্তবায়ন:

  • [ 7.6 .2/H-0-1] 1 GiB এর চেয়ে ছোট একটি অ্যাপ্লিকেশন শেয়ার্ড স্টোরেজ প্রদান করা উচিত নয়।
  • [ 7.7 .1/H] পেরিফেরাল মোড সমর্থনকারী একটি USB পোর্ট অন্তর্ভুক্ত করা উচিত।

যদি হ্যান্ডহেল্ড ডিভাইস বাস্তবায়নে পেরিফেরাল মোড সমর্থনকারী একটি USB পোর্ট অন্তর্ভুক্ত থাকে, তারা:

  • [ 7.7 .1/H-1-1] অবশ্যই Android Open Accessory (AOA) API প্রয়োগ করতে হবে।

যদি হ্যান্ডহেল্ড ডিভাইস বাস্তবায়নে একটি USB পোর্ট সমর্থনকারী হোস্ট মোড অন্তর্ভুক্ত থাকে, তারা:

  • [ 7.7 .2/H-1-1] Android SDK ডকুমেন্টেশনে নথিভুক্ত হিসাবে USB অডিও ক্লাস বাস্তবায়ন করতে হবে।

হ্যান্ডহেল্ড ডিভাইস বাস্তবায়ন:

  • [ 7.8 .1/H-0-1] একটি মাইক্রোফোন অন্তর্ভুক্ত করা আবশ্যক।
  • [ 7.8 .2/H-0-1] একটি অডিও আউটপুট থাকতে হবে এবং android.hardware.audio.output ঘোষণা করতে হবে।

যদি হ্যান্ডহেল্ড ডিভাইস বাস্তবায়ন VR মোড সমর্থন করার জন্য সমস্ত কর্মক্ষমতা প্রয়োজনীয়তা পূরণ করতে সক্ষম হয় এবং এটির জন্য সমর্থন অন্তর্ভুক্ত করে, তারা:

  • [ 7.9 .1/H-1-1] অবশ্যই android.hardware.vr.high_performance বৈশিষ্ট্যের পতাকা ঘোষণা করতে হবে।
  • [ 7.9 .1/H-1-2] অবশ্যই android.service.vr.VrListenerService বাস্তবায়নকারী একটি অ্যাপ্লিকেশন অন্তর্ভুক্ত করতে হবে যা android.app.Activity#setVrModeEnabled এর মাধ্যমে VR অ্যাপ্লিকেশন দ্বারা সক্ষম করা যেতে পারে।

যদি হ্যান্ডহেল্ড ডিভাইস বাস্তবায়নে হোস্ট মোডে এক বা একাধিক USB-C পোর্ট(গুলি) অন্তর্ভুক্ত থাকে এবং সেকশন 7.7.2- এর প্রয়োজনীয়তাগুলি ছাড়াও ইমপ্লিমেন্ট (USB অডিও ক্লাস) থাকে:

  • [ 7.8 .2.2/H-1-1] HID কোডগুলির নিম্নলিখিত সফ্টওয়্যার ম্যাপিং প্রদান করতে হবে:
ফাংশন ম্যাপিং প্রসঙ্গ আচরণ
HID ব্যবহার পৃষ্ঠা : 0x0C
HID ব্যবহার : 0x0CD
কার্নেল কী : KEY_PLAYPAUSE
অ্যান্ড্রয়েড কী : KEYCODE_MEDIA_PLAY_PAUSE
মিডিয়া প্লেব্যাক ইনপুট : শর্ট প্রেস
আউটপুট : খেলা বা বিরতি
ইনপুট : দীর্ঘ প্রেস
আউটপুট : ভয়েস কমান্ড চালু করুন
পাঠায় : android.speech.action.VOICE_SEARCH_HANDS_FREE যদি ডিভাইসটি লক করা থাকে বা এর স্ক্রিন বন্ধ থাকে। অন্যথায় android.speech.RecognizerIntent.ACTION_WEB_SEARCH পাঠায়
ইনকামিং কল ইনপুট : শর্ট প্রেস
আউটপুট : কল গ্রহণ করুন
ইনপুট : দীর্ঘ প্রেস
আউটপুট : কল প্রত্যাখ্যান করুন
চলমান কল ইনপুট : শর্ট প্রেস
আউটপুট : কল শেষ করুন
ইনপুট : দীর্ঘ প্রেস
আউটপুট : মাইক্রোফোন মিউট বা আনমিউট করুন
HID ব্যবহার পৃষ্ঠা : 0x0C
HID ব্যবহার : 0x0E9
কার্নেল কী : KEY_VOLUMEUP
অ্যান্ড্রয়েড কী : VOLUME_UP
মিডিয়া প্লেব্যাক, চলমান কল ইনপুট : ছোট বা দীর্ঘ প্রেস
আউটপুট : সিস্টেম বা হেডসেটের ভলিউম বাড়ায়
HID ব্যবহার পৃষ্ঠা : 0x0C
HID ব্যবহার : 0x0EA
কার্নেল কী : KEY_VOLUMEDOWN
অ্যান্ড্রয়েড কী : VOLUME_DOWN
মিডিয়া প্লেব্যাক, চলমান কল ইনপুট : ছোট বা দীর্ঘ প্রেস
আউটপুট : সিস্টেম বা হেডসেটের ভলিউম হ্রাস করে
ডি HID ব্যবহার পৃষ্ঠা : 0x0C
HID ব্যবহার : 0x0CF
কার্নেল কী : KEY_VOICECOMMAND
অ্যান্ড্রয়েড কী : KEYCODE_VOICE_ASSIST
সব যেকোনো পরিস্থিতিতে ট্রিগার করা যেতে পারে। ইনপুট : ছোট বা দীর্ঘ প্রেস
আউটপুট : ভয়েস কমান্ড চালু করুন
  • [ 7.8 .2.2/H-1-2] একটি প্লাগ সন্নিবেশ করার সময় অবশ্যই ACTION_HEADSET_PLUG ট্রিগার করতে হবে, তবে সংযুক্ত টার্মিনালের ধরন সনাক্ত করার জন্য USB অডিও ইন্টারফেস এবং এন্ডপয়েন্টগুলি সঠিকভাবে গণনা করার পরেই।

যখন USB অডিও টার্মিনাল প্রকার 0x0302 সনাক্ত করা হয়, তারা:

  • [ 7.8 .2.2/H-2-1] "মাইক্রোফোন" 0-এ অতিরিক্ত সেট সহ অভিপ্রায় ACTION_HEADSET_PLUG সম্প্রচার করতে হবে৷

যখন USB অডিও টার্মিনাল প্রকার 0x0402 সনাক্ত করা হয়, তারা:

  • [ 7.8 .2.2/H-3-1] 1-এ অতিরিক্ত সেট "মাইক্রোফোন" সহ ACTION_HEADSET_PLUG অভিপ্রায় সম্প্রচার করতে হবে৷

USB পেরিফেরাল সংযুক্ত থাকার সময় API AudioManager.getDevices() কল করা হলে তারা:

  • [ 7.8 .2.2/H-4-1] USB অডিও টার্মিনাল টাইপ ফিল্ড 0x0302 হলে AudioDeviceInfo.TYPE_USB_HEADSET এবং ভূমিকা isSink() ধরনের ডিভাইসের তালিকা করতে হবে।

  • [ 7.8 .2.2/H-4-2] AudioDeviceInfo.TYPE_USB_HEADSET ধরনের একটি ডিভাইস তালিকাভুক্ত করতে হবে এবং যদি USB অডিও টার্মিনাল টাইপ ক্ষেত্র 0x0402 হয় তাহলে ভূমিকা isSink()।

  • [ 7.8 .2.2/H-4-3] USB অডিও টার্মিনাল টাইপ ফিল্ড 0x0402 হলে AudioDeviceInfo.TYPE_USB_HEADSET ধরনের ডিভাইস এবং ভূমিকা isSource() তালিকাভুক্ত করতে হবে।

  • [ 7.8 .2.2/H-4-4] USB অডিও টার্মিনাল টাইপ ফিল্ড 0x603 হলে AudioDeviceInfo.TYPE_USB_DEVICE এবং ভূমিকা isSink() ধরনের ডিভাইসের তালিকা করতে হবে।

  • [ 7.8 .2.2/H-4-5] USB অডিও টার্মিনাল টাইপ ফিল্ড 0x604 হলে AudioDeviceInfo.TYPE_USB_DEVICE এবং ভূমিকা isSource() ধরনের ডিভাইসের তালিকা করতে হবে।

  • [ 7.8 .2.2/H-4-6] USB অডিও টার্মিনাল টাইপ ফিল্ড 0x400 হলে AudioDeviceInfo.TYPE_USB_DEVICE এবং ভূমিকা isSink() ধরনের ডিভাইসের তালিকা করতে হবে।

  • [ 7.8 .2.2/H-4-7] USB অডিও টার্মিনাল টাইপ ফিল্ড 0x400 হলে AudioDeviceInfo.TYPE_USB_DEVICE এবং ভূমিকা isSource() ধরনের ডিভাইসের তালিকা করতে হবে।

  • [ 7.8 .2.2/H-SR] একটি USB-C অডিও পেরিফেরালের সংযোগের ক্ষেত্রে, USB বর্ণনাকারীর গণনা সম্পাদন করতে, টার্মিনালের ধরন সনাক্ত করতে এবং 1000 মিলিসেকেন্ডেরও কম সময়ে ইন্টেন্ট ACTION_HEADSET_PLUG সম্প্রচার করার জন্য দৃঢ়ভাবে সুপারিশ করা হয়৷

যদি হ্যান্ডহেল্ড ডিভাইস বাস্তবায়নে কমপক্ষে একটি হ্যাপটিক অ্যাকুয়েটর অন্তর্ভুক্ত থাকে, তারা:

  • [ 7.10 /H-SR]* একটি উদ্ভট ঘূর্ণায়মান ভর (ERM) হ্যাপটিক অ্যাকুয়েটর (ভাইব্রেটর) ব্যবহার করার জন্য দৃঢ়ভাবে সুপারিশ করা হয় না।
  • [ 7.10 /H]* যেখানে ডিভাইসটি সাধারণত হাতে ধরে রাখা বা স্পর্শ করা হয় সেই অবস্থানের কাছাকাছি অ্যাকচুয়েটরের স্থাপন করা উচিত।
  • [ 7.10 /H-SR]* android.view.HapticFeedback কন্সট্যান্ট যথা (CLOCK_TICK, CONTEXT_CLICK, KEYBOARD_PRESS, KEYBOARD_RELEASE, KEYBOARD_RELEASE, KEYBOARD_RELEASE, KEYBOARD_RELEASE, KEYBOARD_RELEASE, KEYBOARD_RELEASE, KEYBOARD_RELEASE, android.view . IRTUAL_KEY, VIRTUAL_KEY_RELEASE, নিশ্চিত করুন, প্রত্যাখ্যান করুন, GESTURE_START এবং GESTURE_END)।
  • [ 7.10 / এইচ-এসআর]* অ্যান্ড্রয়েড.ও.এস.ভাইব্রেশনফেক্ট ( এফেক্ট_টিক, এফেক্ট_ক্লিক, এফেক্ট_হ্যাভি_ক্লিক এবং এফেক্ট_ডুবল_ক্লিক) এবং অ্যান্ড্রয়েড.ওস.ভিব্রেশনফেক্টের জন্য সমস্ত পাবলিক কনস্ট্যান্টের জন্য সমস্ত পাবলিক ধ্রুবকগুলির জন্য সমস্ত পাবলিক কনস্ট্যান্টগুলি প্রয়োগ করার জন্য দৃ strongly ়ভাবে সুপারিশ করা হয় এবং যথা (PRIMITIVE_CLICK এবং PRIMITIVE_TICK)।
  • [ 7.10 /H-SR]* এই লিঙ্কযুক্ত হ্যাপটিক ধ্রুবক ম্যাপিংগুলি ব্যবহার করার জন্য কঠোরভাবে সুপারিশ করা হয়
  • [ 7.10 /H - SR ]
  • [ 7.10 /H-SR]* android.os.Vibrator.hasAmplitudeControl() চালিয়ে প্রশস্ততা পরিমাপযোগ্যতার ক্ষমতা যাচাই করার জন্য দৃঢ়ভাবে সুপারিশ করা হচ্ছে।

লিনিয়ার রেজোন্যান্ট অ্যাকচুয়েটর (এলআরএ) হল একটি একক ভর স্প্রিং সিস্টেম যার একটি প্রভাবশালী অনুরণন ফ্রিকোয়েন্সি রয়েছে যেখানে ভর পছন্দসই গতির দিকে অনুবাদ করে।

যদি হ্যান্ডহেল্ড ডিভাইস বাস্তবায়নে কমপক্ষে একটি লিনিয়ার রেজোন্যান্ট অ্যাকচুয়েটর অন্তর্ভুক্ত থাকে, তারা:

  • [ 7.10 /H]* পোর্ট্রেট ওরিয়েন্টেশনের X-অক্ষে হ্যাপটিক অ্যাকুয়েটরকে সরানো উচিত।

হ্যান্ডহেল্ড ডিভাইস বাস্তবায়নে যদি হ্যাপটিক অ্যাকচুয়েটর থাকে যা এক্স-অ্যাক্সিস লিনিয়ার রেজোন্যান্ট অ্যাকচুয়েটর (এলআরএ), তারা:

  • [ 7.10 /H-SR]* X-অক্ষ LRA-এর অনুরণিত ফ্রিকোয়েন্সি 200 Hz-এর নিচে থাকার জন্য দৃঢ়ভাবে সুপারিশ করা হয়।

হ্যান্ডহেল্ড ডিভাইস বাস্তবায়ন যদি হ্যাপটিক ধ্রুবক ম্যাপিং অনুসরণ করে, তারা:

2.2.2। মাল্টিমিডিয়া

হ্যান্ডহেল্ড ডিভাইস বাস্তবায়ন অবশ্যই নিম্নলিখিত অডিও এনকোডিং এবং ডিকোডিং ফর্ম্যাটগুলিকে সমর্থন করবে এবং তৃতীয় পক্ষের অ্যাপ্লিকেশনগুলিতে সেগুলি উপলব্ধ করবে:

  • [ 5.1 /H-0-1] AMR-NB
  • [ 5.1 /H-0-2] AMR-WB
  • [ 5.1 /H-0-3] MPEG-4 AAC প্রোফাইল (AAC LC)
  • [ 5.1 /H-0-4] MPEG-4 HE AAC প্রোফাইল (AAC+)
  • [ 5.1 /H-0-5] AAC ELD (বর্ধিত কম বিলম্ব AAC)

হ্যান্ডহেল্ড ডিভাইস বাস্তবায়ন অবশ্যই নিম্নলিখিত ভিডিও এনকোডিং ফর্ম্যাটগুলিকে সমর্থন করবে এবং তৃতীয় পক্ষের অ্যাপ্লিকেশনগুলিতে সেগুলি উপলব্ধ করবে:

  • [ 5.2 /H-0-1] H.264 AVC
  • [ 5.2 /H-0-2] VP8

হ্যান্ডহেল্ড ডিভাইস বাস্তবায়ন অবশ্যই নিম্নলিখিত ভিডিও ডিকোডিং ফর্ম্যাটগুলিকে সমর্থন করবে এবং তৃতীয় পক্ষের অ্যাপ্লিকেশনগুলিতে সেগুলি উপলব্ধ করবে:

  • [ 5.3 /H-0-1] H.264 AVC
  • [ 5.3 /H-0-2] H.265 HEVC
  • [ 5.3 /H-0-3] MPEG-4 SP
  • [ 5.3 /H-0-4] VP8
  • [ 5.3 /H-0-5] VP9

2.2.3। সফটওয়্যার

হ্যান্ডহেল্ড ডিভাইস বাস্তবায়ন:

  • [ 3.2.3.1 /H-0-1] SDK নথিতে বর্ণিত হিসাবে ACTION_GET_CONTENT , ACTION_OPEN_DOCUMENT , ACTION_OPEN_DOCUMENT_TREE , এবং ACTION_CREATE_DOCUMENT ইন্টেন্টগুলি পরিচালনা করে এমন একটি অ্যাপ্লিকেশন থাকতে হবে এবং ব্যবহারকারীকে DocumentsProvider এর মাধ্যমে ডকুমেন্ট অ্যাক্সেস করার জন্য ডকুমেন্ট সরবরাহ করতে হবে৷
  • [ 3.2.3.1 /H-0-2]* এখানে তালিকাভুক্ত নিম্নলিখিত অ্যাপ্লিকেশন ইন্টেন্ট দ্বারা সংজ্ঞায়িত সমস্ত পাবলিক ইনটেন্ট ফিল্টার প্যাটার্নের জন্য একটি ইন্টেন্ট হ্যান্ডলারের সাথে এক বা একাধিক অ্যাপ্লিকেশন বা পরিষেবা উপাদান প্রিলোড করতে হবে৷
  • [ 3.2.3.1 /H-SR] একটি ইমেল অ্যাপ্লিকেশন প্রিলোড করার জন্য দৃঢ়ভাবে সুপারিশ করা হয় যা একটি ইমেল পাঠানোর জন্য ACTION_SENDTO বা ACTION_SEND বা ACTION_SEND_MULTIPLE উদ্দেশ্যগুলি পরিচালনা করতে পারে৷
  • [ 3.4 .1/H-0-1] অবশ্যই android.webkit.Webview API-এর সম্পূর্ণ বাস্তবায়ন প্রদান করতে হবে।
  • [ 3.4 .2/H-0-1] সাধারণ ব্যবহারকারীর ওয়েব ব্রাউজিংয়ের জন্য একটি স্বতন্ত্র ব্রাউজার অ্যাপ্লিকেশন অন্তর্ভুক্ত করা আবশ্যক।
  • [ 3.8 .1/H-SR] শর্টকাট, উইজেট এবং উইজেট বৈশিষ্ট্যগুলির ইন-অ্যাপ পিনিং সমর্থন করে এমন একটি ডিফল্ট লঞ্চার প্রয়োগ করার জন্য দৃঢ়ভাবে সুপারিশ করা হয়৷
  • [ 3.8 .1/H-SR] একটি ডিফল্ট লঞ্চার প্রয়োগ করার জন্য দৃঢ়ভাবে সুপারিশ করা হয় যা শর্টকাট ম্যানেজার API এর মাধ্যমে তৃতীয় পক্ষের অ্যাপগুলির দ্বারা প্রদত্ত অতিরিক্ত শর্টকাটগুলিতে দ্রুত অ্যাক্সেস প্রদান করে৷
  • [ 3.8 .1/H-SR] একটি ডিফল্ট লঞ্চার অ্যাপ অন্তর্ভুক্ত করার জন্য দৃঢ়ভাবে সুপারিশ করা হয় যা অ্যাপ আইকনগুলির জন্য ব্যাজ দেখায়।
  • [ 3.8 .2/H-SR] তৃতীয় পক্ষের অ্যাপ উইজেট সমর্থন করার জন্য দৃঢ়ভাবে সুপারিশ করা হয়।
  • [ 3.8 .3/H-0-1] Notification এবং NotificationManager এপিআই ক্লাসের মাধ্যমে উল্লেখযোগ্য ইভেন্টগুলির ব্যবহারকারীদের অবহিত করার জন্য তৃতীয় পক্ষের অ্যাপগুলিকে অবশ্যই অনুমতি দিতে হবে৷
  • [ 3.8 .3/H-0-2] সমৃদ্ধ বিজ্ঞপ্তি সমর্থন করতে হবে।
  • [ 3.8 .3/H-0-3] অবশ্যই হেড-আপ বিজ্ঞপ্তি সমর্থন করতে হবে।
  • [ 3.8 .3/H-0-4] অবশ্যই একটি নোটিফিকেশন শেড অন্তর্ভুক্ত করতে হবে, যা ব্যবহারকারীকে সরাসরি নিয়ন্ত্রণ করার ক্ষমতা প্রদান করে (যেমন উত্তর, স্নুজ, খারিজ, ব্লক) ব্যবহারকারীর সামর্থ্য যেমন অ্যাকশন বোতাম বা কন্ট্রোল প্যানেলের মাধ্যমে প্রয়োগ করা হয়েছে AOSP-এ।
  • [ 3.8 .3/H-0-5] RemoteInput.Builder setChoices() এর মাধ্যমে প্রদত্ত পছন্দগুলি অবশ্যই বিজ্ঞপ্তি ছায়ায় প্রদর্শন করতে হবে।
  • [ 3.8 .3/H-SR] অতিরিক্ত ব্যবহারকারীর মিথস্ক্রিয়া ছাড়াই বিজ্ঞপ্তি ছায়ায় RemoteInput.Builder setChoices() এর মাধ্যমে প্রদত্ত প্রথম পছন্দ প্রদর্শন করার জন্য দৃঢ়ভাবে সুপারিশ করা হয়।
  • [ 3.8 .3/H-SR] ব্যবহারকারী যখন বিজ্ঞপ্তি ছায়ায় সমস্ত বিজ্ঞপ্তি প্রসারিত করে তখন বিজ্ঞপ্তি ছায়ায় RemoteInput.Builder setChoices() এর মাধ্যমে প্রদত্ত সমস্ত পছন্দ প্রদর্শন করার জন্য দৃঢ়ভাবে সুপারিশ করা হয়।
  • [ 3.8 .3.1/H-SR] ক্রিয়াগুলি প্রদর্শন করার জন্য দৃঢ়ভাবে সুপারিশ করা হয় যার জন্য Notification.Action.Builder.setContextual Notification.Remoteinput.Builder.setChoices দ্বারা প্রদর্শিত উত্তরগুলির সাথে true ইন-লাইনে সেট করা হয়েছে৷
  • [ 3.8 .4/H-SR] অ্যাসিস্ট অ্যাকশন পরিচালনা করার জন্য ডিভাইসে একজন সহকারীকে প্রয়োগ করার জন্য দৃঢ়ভাবে সুপারিশ করা হয়।

যদি হ্যান্ডহেল্ড ডিভাইস বাস্তবায়ন সহায়তা অ্যাকশন সমর্থন করে, তারা:

  • [ 3.8 .4/H-SR] অধ্যায় 7.2.3 এ বর্ণিত সহায়তা অ্যাপ চালু করার জন্য মনোনীত ইন্টারঅ্যাকশন হিসাবে HOME কী-তে দীর্ঘক্ষণ প্রেস করার জন্য দৃঢ়ভাবে সুপারিশ করা হচ্ছে। ব্যবহারকারী-নির্বাচিত সহায়তা অ্যাপটি অবশ্যই লঞ্চ করতে হবে, অন্য কথায় যে অ্যাপটি VoiceInteractionService প্রয়োগ করে, বা ACTION_ASSIST অভিপ্রায় পরিচালনা করে এমন একটি কার্যকলাপ।

যদি হ্যান্ডহেল্ড ডিভাইস বাস্তবায়ন conversation notifications সমর্থন করে এবং সতর্কতা এবং নীরব নন-কথোপকথন বিজ্ঞপ্তি থেকে আলাদা বিভাগে গোষ্ঠীবদ্ধ করে, তারা:

  • [ 3.8 .4/H-1-1]* চলমান ফোরগ্রাউন্ড পরিষেবা বিজ্ঞপ্তি এবং গুরুত্ব: উচ্চ বিজ্ঞপ্তিগুলি বাদ দিয়ে কথোপকথনের বিজ্ঞপ্তিগুলি অ-কথোপকথনের বিজ্ঞপ্তিগুলিকে অবশ্যই প্রদর্শন করতে হবে৷

যদি অ্যান্ড্রয়েড হ্যান্ডহেল্ড ডিভাইস বাস্তবায়ন একটি লক স্ক্রীন সমর্থন করে, তারা:

  • [ 3.8 .10/H-1-1] মিডিয়া বিজ্ঞপ্তি টেমপ্লেট সহ লক স্ক্রীন বিজ্ঞপ্তিগুলি অবশ্যই প্রদর্শন করতে হবে৷

যদি হ্যান্ডহেল্ড ডিভাইস বাস্তবায়ন একটি নিরাপদ লক স্ক্রীন সমর্থন করে, তারা:

  • [ 3.9 /H-1-1] অ্যান্ড্রয়েড SDK ডকুমেন্টেশনে সংজ্ঞায়িত ডিভাইস প্রশাসন নীতির সম্পূর্ণ পরিসর বাস্তবায়ন করতে হবে।
  • [ 3.9 /H-1-2] android.software.managed_users বৈশিষ্ট্য পতাকার মাধ্যমে পরিচালিত প্রোফাইলগুলির সমর্থন ঘোষণা করতে হবে, ডিভাইসটি কনফিগার করা ছাড়া যাতে এটি নিজেকে একটি কম RAM ডিভাইস হিসাবে রিপোর্ট করবে বা যাতে এটি অভ্যন্তরীণ বরাদ্দ করে ( অপসারণযোগ্য) স্টোরেজ শেয়ার্ড স্টোরেজ হিসাবে।

যদি হ্যান্ডহেল্ড ডিভাইস বাস্তবায়নে ControlsProviderService এবং Control API-এর সমর্থন অন্তর্ভুক্ত থাকে এবং তৃতীয় পক্ষের অ্যাপ্লিকেশনগুলিকে ডিভাইস নিয়ন্ত্রণ প্রকাশ করার অনুমতি দেয়, তাহলে তারা:

  • [ 3.8 .16/H-1-1] ফিচার পতাকা android.software.controls ঘোষণা করতে হবে এবং এটি true সেট করতে হবে।
  • [ 3.8 .16/H-1-2] ControlsProviderService এবং Control API-এর মাধ্যমে তৃতীয় পক্ষের অ্যাপ্লিকেশনগুলির দ্বারা নিবন্ধিত নিয়ন্ত্রণগুলি থেকে ব্যবহারকারীর পছন্দসই ডিভাইস নিয়ন্ত্রণগুলি যোগ, সম্পাদনা, নির্বাচন এবং পরিচালনা করার ক্ষমতা সহ একটি ব্যবহারকারীর সামর্থ্য প্রদান করতে হবে .
  • [ 3.8 .16/H-1-3] একটি ডিফল্ট লঞ্চার থেকে তিনটি ইন্টারঅ্যাকশনের মধ্যে এই ব্যবহারকারীর সামর্থ্যের অ্যাক্সেস প্রদান করতে হবে।
  • [ 3.8 .16/H-1-4] এই ব্যবহারকারীর সামর্থ্যের মধ্যে অবশ্যই প্রতিটি তৃতীয় পক্ষের অ্যাপের নাম এবং আইকন সঠিকভাবে রেন্ডার করতে হবে যা ControlsProviderService API-এর মাধ্যমে নিয়ন্ত্রণ প্রদান করে সেইসাথে Control API দ্বারা প্রদত্ত কোনো নির্দিষ্ট ক্ষেত্র।

বিপরীতভাবে, যদি হ্যান্ডহেল্ড ডিভাইস বাস্তবায়ন এই ধরনের নিয়ন্ত্রণ বাস্তবায়ন না করে, তারা:

  • [ 3.8 .16/H-2-1] ControlsProviderService এবং Control API-এর জন্য null রিপোর্ট করতে হবে।
  • [ 3.8 .16/H-2-2] ফিচার ফ্ল্যাগ android.software.controls ঘোষণা করতে হবে এবং এটি false সেট করতে হবে।

হ্যান্ডহেল্ড ডিভাইস বাস্তবায়ন:

  • [ 3.10 /H-0-1] তৃতীয় পক্ষের অ্যাক্সেসিবিলিটি পরিষেবাগুলিকে অবশ্যই সমর্থন করতে হবে৷
  • [ 3.10 /H-SR] সুইচ অ্যাক্সেস এবং টকব্যাকের (প্রি-ইন্সটল করা টেক্সট-টু-স্পিচ ইঞ্জিন দ্বারা সমর্থিত ভাষাগুলির জন্য) অ্যাক্সেসিবিলিটি পরিষেবাগুলির সাথে তুলনীয় বা তার বেশি কার্যকারিতা ডিভাইসে প্রিলোড করার জন্য দৃঢ়ভাবে সুপারিশ করা হয় যেমন টকব্যাক খোলাতে দেওয়া হয়েছে উত্স প্রকল্প
  • [ 3.11 /H-0-1] তৃতীয় পক্ষের TTS ইঞ্জিন ইনস্টলেশন সমর্থন করতে হবে।
  • [ 3.11 /H-SR] ডিভাইসে উপলব্ধ ভাষাগুলিকে সমর্থন করে এমন একটি TTS ইঞ্জিন অন্তর্ভুক্ত করার জন্য দৃঢ়ভাবে সুপারিশ করা হচ্ছে৷
  • [ 3.13 /H-SR] একটি দ্রুত সেটিংস UI উপাদান অন্তর্ভুক্ত করার জন্য দৃঢ়ভাবে সুপারিশ করা হয়।

যদি Android হ্যান্ডহেল্ড ডিভাইস বাস্তবায়ন FEATURE_BLUETOOTH বা FEATURE_WIFI সমর্থন ঘোষণা করে, তারা:

  • [ 3.16 /H-1-1] সহচর ডিভাইস জোড়া বৈশিষ্ট্য সমর্থন আবশ্যক.

যদি নেভিগেশন ফাংশন একটি অন-স্ক্রীন, অঙ্গভঙ্গি-ভিত্তিক ক্রিয়া হিসাবে প্রদান করা হয়:

  • [ 7.2 .3/H] হোম ফাংশনের জন্য অঙ্গভঙ্গি শনাক্তকরণ অঞ্চলটি স্ক্রিনের নীচে থেকে উচ্চতায় 32 ডিপির বেশি হওয়া উচিত নয়৷

যদি হ্যান্ডহেল্ড ডিভাইস বাস্তবায়নগুলি স্ক্রিনের বাম এবং ডান প্রান্তের যেকোনো স্থান থেকে একটি অঙ্গভঙ্গি হিসাবে একটি নেভিগেশন ফাংশন প্রদান করে:

  • [ 7.2 .3/H-0-1] নেভিগেশন ফাংশনের অঙ্গভঙ্গি এলাকাটি অবশ্যই প্রতিটি পাশে প্রস্থে 40 ডিপির কম হতে হবে। অঙ্গভঙ্গি এলাকা ডিফল্টরূপে প্রস্থে 24 ডিপি হওয়া উচিত।

2.2.4। কর্মক্ষমতা এবং ক্ষমতা

  • [ 8.1 /H-0-1] সামঞ্জস্যপূর্ণ ফ্রেম লেটেন্সি । অসামঞ্জস্যপূর্ণ ফ্রেম লেটেন্সি বা ফ্রেম রেন্ডার করতে বিলম্ব এক সেকেন্ডে 5 ফ্রেমের বেশি হওয়া উচিত নয় এবং এক সেকেন্ডে 1 ফ্রেমের নিচে হওয়া উচিত।
  • [ 8.1 /H-0-2] ইউজার ইন্টারফেস লেটেন্সি । ডিভাইস বাস্তবায়ন অবশ্যই 36 সেকেন্ডেরও কম সময়ে Android সামঞ্জস্য পরীক্ষা স্যুট (CTS) দ্বারা সংজ্ঞায়িত 10K তালিকা এন্ট্রিগুলির একটি তালিকা স্ক্রোল করে কম লেটেন্সি ব্যবহারকারীর অভিজ্ঞতা নিশ্চিত করতে হবে।
  • [ 8.1 /H-0-3] টাস্ক স্যুইচিং । যখন একাধিক অ্যাপ্লিকেশান লঞ্চ করা হয়, একটি ইতিমধ্যেই চলমান অ্যাপ্লিকেশানটি চালু হওয়ার পরে পুনরায় চালু করতে 1 সেকেন্ডের কম সময় লাগবে৷

হ্যান্ডহেল্ড ডিভাইস বাস্তবায়ন:

  • [ 8.2 /H-0-1] কমপক্ষে 5 MB/s এর একটি ক্রমিক লেখার কার্যক্ষমতা নিশ্চিত করতে হবে।
  • [ 8.2 /H-0-2] কমপক্ষে 0.5 MB/s এর র্যান্ডম রাইটিং পারফরম্যান্স নিশ্চিত করতে হবে।
  • [ 8.2 /H-0-3] কমপক্ষে 15 MB/s এর একটি অনুক্রমিক পঠন কার্যক্ষমতা নিশ্চিত করতে হবে।
  • [ 8.2 /H-0-4] কমপক্ষে 3.5 MB/s এর র্যান্ডম রিড পারফরম্যান্স নিশ্চিত করতে হবে।

হ্যান্ডহেল্ড ডিভাইস বাস্তবায়নে যদি AOSP-তে অন্তর্ভুক্ত ডিভাইস পাওয়ার ম্যানেজমেন্ট উন্নত করার বৈশিষ্ট্যগুলি অন্তর্ভুক্ত থাকে বা AOSP-তে অন্তর্ভুক্ত বৈশিষ্ট্যগুলি প্রসারিত করে, তারা:

  • [ 8.3 /H-1-1] ব্যাটারি সেভার বৈশিষ্ট্য সক্রিয় এবং নিষ্ক্রিয় করার জন্য অবশ্যই ব্যবহারকারীর সামর্থ্য প্রদান করতে হবে।
  • [ 8.3 /H-1-2] অ্যাপ স্ট্যান্ডবাই এবং ডোজ পাওয়ার-সেভিং মোড থেকে অব্যাহতিপ্রাপ্ত সমস্ত অ্যাপ প্রদর্শনের জন্য ব্যবহারকারীর সামর্থ্য প্রদান করতে হবে।

হ্যান্ডহেল্ড ডিভাইস বাস্তবায়ন:

  • [ 8.4 /H-0-1] একটি প্রতি-কম্পোনেন্ট পাওয়ার প্রোফাইল প্রদান করতে হবে যা প্রতিটি হার্ডওয়্যার উপাদানের জন্য বর্তমান খরচের মান এবং সময়ের সাথে সাথে উপাদানগুলির দ্বারা সৃষ্ট আনুমানিক ব্যাটারি ড্রেনকে সংজ্ঞায়িত করে যেমনটি Android ওপেন সোর্স প্রকল্প সাইটে নথিভুক্ত করা হয়েছে।
  • [ 8.4 /H-0-2] মিলিঅ্যাম্পিয়ার আওয়ারে (mAh) সমস্ত পাওয়ার খরচের মান রিপোর্ট করতে হবে।
  • [ 8.4 /H-0-3] প্রতিটি প্রক্রিয়ার UID প্রতি CPU পাওয়ার খরচ রিপোর্ট করতে হবে। অ্যান্ড্রয়েড ওপেন সোর্স প্রকল্প uid_cputime কার্নেল মডিউল বাস্তবায়নের মাধ্যমে প্রয়োজনীয়তা পূরণ করে।
  • [ 8.4 /H-0-4] অ্যাপ ডেভেলপারকে adb shell dumpsys batterystats শেল কমান্ডের মাধ্যমে এই পাওয়ার ব্যবহার উপলব্ধ করতে হবে।
  • [ 8.4 /H] একটি অ্যাপ্লিকেশনে হার্ডওয়্যার উপাদান শক্তি ব্যবহার বৈশিষ্ট্যযুক্ত করতে অক্ষম হলে হার্ডওয়্যার উপাদান নিজেই দায়ী করা উচিত.

যদি হ্যান্ডহেল্ড ডিভাইস বাস্তবায়নে একটি স্ক্রিন বা ভিডিও আউটপুট অন্তর্ভুক্ত থাকে, তারা:

  • [ 8.4 /H-1-1] অবশ্যই android.intent.action.POWER_USAGE_SUMMARY অভিপ্রায়কে সম্মান করতে হবে এবং একটি সেটিংস মেনু প্রদর্শন করতে হবে যা এই পাওয়ার ব্যবহার দেখায়।

2.2.5। নিরাপত্তা মডেল

হ্যান্ডহেল্ড ডিভাইস বাস্তবায়ন:

  • [ 9.1 /H-0-1] তৃতীয় পক্ষের অ্যাপগুলিকে অবশ্যই android.permission.PACKAGE_USAGE_STATS অনুমতির মাধ্যমে ব্যবহারের পরিসংখ্যান অ্যাক্সেস করার অনুমতি দিতে হবে এবং android.settings.ACTION_USAGE_ACCESS_SETTINGS এর প্রতিক্রিয়া হিসাবে এই ধরনের অ্যাপগুলিতে অ্যাক্সেস মঞ্জুর বা প্রত্যাহার করার জন্য একটি ব্যবহারকারী-অ্যাক্সেসযোগ্য ব্যবস্থা প্রদান করতে হবে android.settings.ACTION_USAGE_ACCESS_SETTINGS অভিপ্রায়।

হ্যান্ডহেল্ড ডিভাইস বাস্তবায়ন (* ট্যাবলেটের জন্য প্রযোজ্য নয়):

  • [ 9.11 /H-0-2]* একটি বিচ্ছিন্ন এক্সিকিউশন এনভায়রনমেন্টের সাথে কীস্টোর বাস্তবায়নের ব্যাক আপ নিতে হবে।
  • [ 9.11 /H-0-3]* একটি এলাকায় Android কীস্টোর সিস্টেমের সমর্থিত অ্যালগরিদমগুলিকে সঠিকভাবে সমর্থন করার জন্য RSA, AES, ECDSA, এবং HMAC ক্রিপ্টোগ্রাফিক অ্যালগরিদম এবং MD5, SHA1, এবং SHA-2 ফ্যামিলি হ্যাশ ফাংশনগুলির বাস্তবায়ন থাকতে হবে কার্নেল এবং উপরে চলমান কোড থেকে নিরাপদে বিচ্ছিন্ন। সুরক্ষিত বিচ্ছিন্নতা অবশ্যই সমস্ত সম্ভাব্য প্রক্রিয়াকে অবরুদ্ধ করতে হবে যার দ্বারা কার্নেল বা ইউজারস্পেস কোড ডিএমএ সহ বিচ্ছিন্ন পরিবেশের অভ্যন্তরীণ অবস্থা অ্যাক্সেস করতে পারে। আপস্ট্রিম অ্যান্ড্রয়েড ওপেন সোর্স প্রজেক্ট (AOSP) ট্রাস্টি বাস্তবায়ন ব্যবহার করে এই প্রয়োজনীয়তা পূরণ করে, কিন্তু অন্য একটি ARM TrustZone-ভিত্তিক সমাধান বা একটি সঠিক হাইপারভাইজার-ভিত্তিক বিচ্ছিন্নতার একটি তৃতীয় পক্ষের পর্যালোচনা করা নিরাপদ বাস্তবায়ন হল বিকল্প বিকল্প।
  • [ 9.11 /H-0-4]* বিচ্ছিন্ন এক্সিকিউশন পরিবেশে অবশ্যই লক স্ক্রিন প্রমাণীকরণ করতে হবে এবং শুধুমাত্র সফল হলে, প্রমাণীকরণ-বাউন্ড কীগুলি ব্যবহার করার অনুমতি দিন। লক স্ক্রিন শংসাপত্রগুলি অবশ্যই এমনভাবে সংরক্ষণ করা উচিত যা শুধুমাত্র বিচ্ছিন্ন এক্সিকিউশন পরিবেশকে লক স্ক্রিন প্রমাণীকরণ করতে দেয়৷ আপস্ট্রিম অ্যান্ড্রয়েড ওপেন সোর্স প্রজেক্ট গেটকিপার হার্ডওয়্যার অ্যাবস্ট্রাকশন লেয়ার (HAL) এবং ট্রাস্টি প্রদান করে, যা এই প্রয়োজনীয়তা মেটাতে ব্যবহার করা যেতে পারে।
  • [ 9.11 /H-0-5]* কী প্রত্যয়নকে সমর্থন করতে হবে যেখানে সত্যায়ন স্বাক্ষর কী সুরক্ষিত হার্ডওয়্যার দ্বারা সুরক্ষিত থাকে এবং সাইনিং নিরাপদ হার্ডওয়্যারে সঞ্চালিত হয়। প্রত্যয়ন স্বাক্ষরকারী কীগুলিকে ডিভাইস শনাক্তকারী হিসাবে ব্যবহার করা থেকে আটকাতে যথেষ্ট সংখ্যক ডিভাইস জুড়ে শেয়ার করা আবশ্যক৷ এই প্রয়োজনীয়তা পূরণের একটি উপায় হল একই প্রত্যয়ন কী শেয়ার করা যদি না একটি প্রদত্ত SKU-এর কমপক্ষে 100,000 ইউনিট তৈরি করা হয়। যদি একটি SKU-এর 100,000 ইউনিটের বেশি উত্পাদিত হয়, তাহলে প্রতিটি 100,000 ইউনিটের জন্য একটি ভিন্ন কী ব্যবহার করা যেতে পারে।

মনে রাখবেন যে যদি একটি ডিভাইস বাস্তবায়ন ইতিমধ্যেই একটি পূর্ববর্তী অ্যান্ড্রয়েড সংস্করণে চালু করা হয়, তাহলে এই ধরনের ডিভাইসটিকে একটি বিচ্ছিন্ন এক্সিকিউশন এনভায়রনমেন্ট দ্বারা সমর্থিত একটি কীস্টোর থাকা এবং কী প্রত্যয়ন সমর্থন করার প্রয়োজনীয়তা থেকে অব্যাহতি দেওয়া হয়, যদি না এটি android.hardware.fingerprint বৈশিষ্ট্যটি ঘোষণা করে যা একটি বিচ্ছিন্ন এক্সিকিউশন পরিবেশ দ্বারা সমর্থিত একটি কীস্টোর প্রয়োজন।

যখন হ্যান্ডহেল্ড ডিভাইস বাস্তবায়ন একটি নিরাপদ লক স্ক্রীন সমর্থন করে, তারা:

  • [ 9.11 /H-1-1] ব্যবহারকারীকে অবশ্যই সর্বনিম্ন ঘুমের সময়সীমা বেছে নেওয়ার অনুমতি দিতে হবে, এটি হল আনলক করা থেকে লক করা অবস্থায় 15 সেকেন্ড বা তার কম সময়।
  • [ 9.11 /H-1-2] 9.11.1 সিকিউর লক স্ক্রিনে বর্ণিত প্রাথমিক প্রমাণীকরণ ব্যতীত বিজ্ঞপ্তিগুলি লুকানোর জন্য এবং সমস্ত ধরণের প্রমাণীকরণ অক্ষম করার জন্য ব্যবহারকারীকে অবশ্যই সামর্থ্য প্রদান করতে হবে৷ AOSP লকডাউন মোড হিসাবে প্রয়োজনীয়তা পূরণ করে।

যদি হ্যান্ডহেল্ড ডিভাইস বাস্তবায়নে একাধিক ব্যবহারকারী অন্তর্ভুক্ত থাকে এবং android.hardware.telephony বৈশিষ্ট্য পতাকা ঘোষণা না করে, তারা:

  • [ 9.5 /H-2-1] সীমাবদ্ধ প্রোফাইলগুলিকে অবশ্যই সমর্থন করতে হবে, একটি বৈশিষ্ট্য যা ডিভাইসের মালিকদের ডিভাইসে অতিরিক্ত ব্যবহারকারী এবং তাদের ক্ষমতা পরিচালনা করতে দেয়। সীমাবদ্ধ প্রোফাইলগুলির সাথে, ডিভাইসের মালিকরা অতিরিক্ত ব্যবহারকারীদের জন্য কাজ করার জন্য দ্রুত আলাদা পরিবেশ সেট আপ করতে পারে, সেই পরিবেশে উপলব্ধ অ্যাপগুলিতে সূক্ষ্ম সীমাবদ্ধতা পরিচালনা করার ক্ষমতা সহ।

যদি হ্যান্ডহেল্ড ডিভাইস বাস্তবায়নে একাধিক ব্যবহারকারী অন্তর্ভুক্ত থাকে এবং android.hardware.telephony বৈশিষ্ট্য পতাকা ঘোষণা করে, তারা:

  • [ 9.5 /H-3-1] সীমাবদ্ধ প্রোফাইলগুলিকে সমর্থন করা উচিত নয় তবে অন্য ব্যবহারকারীদের ভয়েস কল এবং এসএমএস অ্যাক্সেস করতে সক্ষম/অক্ষম করতে নিয়ন্ত্রণগুলির AOSP বাস্তবায়নের সাথে সারিবদ্ধ হওয়া উচিত।

2.2.6। বিকাশকারী সরঞ্জাম এবং বিকল্প সামঞ্জস্য

হ্যান্ডহেল্ড ডিভাইস বাস্তবায়ন (* ট্যাবলেটের জন্য প্রযোজ্য নয়):

  • [ 6.1 /H-0-1]* শেল কমান্ড cmd testharness সমর্থন করতে হবে।

হ্যান্ডহেল্ড ডিভাইস বাস্তবায়ন (* ট্যাবলেটের জন্য প্রযোজ্য নয়):

  • পারফেটো
    • [ 6.1 /H-0-2]* একটি /system/bin/perfetto বাইনারি শেল ব্যবহারকারীর কাছে প্রকাশ করতে হবে যা cmdline পারফেটো ডকুমেন্টেশন মেনে চলে।
    • [ 6.1 /H-0-3]* পারফেটো বাইনারিকে অবশ্যই একটি প্রোটোবাফ কনফিগারেশন ইনপুট হিসাবে গ্রহণ করতে হবে যা পারফেটো ডকুমেন্টেশনে সংজ্ঞায়িত স্কিমার সাথে সঙ্গতিপূর্ণ।
    • [ 6.1 /H-0-4]* পারফেটো বাইনারিকে অবশ্যই আউটপুট হিসাবে একটি প্রোটোবাফ ট্রেস লিখতে হবে যা পারফেটো ডকুমেন্টেশনে সংজ্ঞায়িত স্কিমার সাথে সঙ্গতিপূর্ণ।
    • [ 6.1 /H-0-5]* পারফেটো বাইনারির মাধ্যমে অবশ্যই পারফেটো ডকুমেন্টেশনে বর্ণিত ডেটা উত্সগুলি অবশ্যই প্রদান করতে হবে৷
    • [ 6.1 /H-0-6]* পারফেটো ট্রেসড ডেমন ডিফল্টরূপে সক্রিয় করা আবশ্যক (সিস্টেম প্রপার্টি persist.traced.enable )।

2.2.7 হ্যান্ডহেল্ড মিডিয়া পারফরম্যান্স ক্লাস

মিডিয়া কর্মক্ষমতা শ্রেণীর সংজ্ঞার জন্য বিভাগ 7.11 দেখুন।

2.2.7.1। মিডিয়া

যদি হ্যান্ডহেল্ড ডিভাইস বাস্তবায়ন android.os.Build.VERSION_CODES.MEDIA_PERFORMANCE_CLASS এর জন্য android.os.Build.VERSION_CODES.R ফেরত দেয়, তাহলে তারা:

  • [5.1/H-1-1] সর্বাধিক সংখ্যক হার্ডওয়্যার ভিডিও ডিকোডার সেশনের বিজ্ঞাপন দিতে হবে যা CodecCapabilities.getMaxSupportedInstances() এবং VideoCapabilities.getSupportedPerformancePoints() পদ্ধতির মাধ্যমে যেকোন কোডেক সংমিশ্রণে একযোগে চালানো যেতে পারে।
  • [5.1/H-1-2] হার্ডওয়্যার ভিডিও ডিকোডার সেশনের (AVC বা HEVC) 6 টি দৃষ্টান্তকে সমর্থন করতে হবে যেকোন কোডেক সংমিশ্রণে 720p রেজোলিউশন@30 fps এ একই সাথে চলমান।
  • [5.1/H-1-3] সর্বাধিক সংখ্যক হার্ডওয়্যার ভিডিও এনকোডার সেশনের বিজ্ঞাপন দিতে হবে যা CodecCapabilities.getMaxSupportedInstances() এবং VideoCapabilities.getSupportedPerformancePoints() পদ্ধতির মাধ্যমে যেকোন কোডেক সংমিশ্রণে একযোগে চালানো যেতে পারে।
  • [5.1/H-1-4] 720p রেজোলিউশন@30 fps-এ একই সাথে চলমান যেকোনো কোডেক সংমিশ্রণে হার্ডওয়্যার ভিডিও এনকোডার সেশনের (AVC বা HEVC) 6টি দৃষ্টান্ত সমর্থন করতে হবে।
  • [5.1/H-1-5] অবশ্যই সর্বাধিক সংখ্যক হার্ডওয়্যার ভিডিও এনকোডার এবং ডিকোডার সেশনের বিজ্ঞাপন দিতে হবে যা CodecCapabilities.getMaxSupportedInstances() এবং VideoCapabilities.getSupportedPerformancePoints() পদ্ধতির মাধ্যমে যেকোন কোডেক সংমিশ্রণে একযোগে চালানো যেতে পারে।
  • [5.1/H-1-6] হার্ডওয়্যার ভিডিও ডিকোডার এবং হার্ডওয়্যার ভিডিও এনকোডার সেশনের (AVC বা HEVC) 6 টি দৃষ্টান্ত সমর্থন করতে হবে যেকোন কোডেক সংমিশ্রণে 720p@30 fps রেজোলিউশনে একই সাথে চলমান।
  • [5.1/H-1-7] লোডের অধীনে থাকাকালীন সমস্ত হার্ডওয়্যার ভিডিও এনকোডারের (ডলবি ভিশন কোডেক ছাড়া) একটি 1080p বা ছোট ভিডিও এনকোডিং সেশনের জন্য 65 ms বা তার কম কোডেক প্রারম্ভিকতা লেটেন্সি থাকতে হবে। এখানে লোডকে 1080p অডিও-ভিডিও রেকর্ডিং ইনিশিয়ালাইজেশনের সাথে হার্ডওয়্যার ভিডিও কোডেক ব্যবহার করে একটি সমবর্তী 1080p থেকে 720p ভিডিও-শুধুমাত্র ভিডিও ট্রান্সকোডিং সেশন হিসাবে সংজ্ঞায়িত করা হয়েছে।
  • [5.1/H-1-8] একটি 128 kbps বা নিম্নতর বিটরেট অডিও এনকোডিং সেশনের জন্য 50 ms বা তার কম একটি কোডেক প্রারম্ভিকতা লেটেন্সি থাকতে হবে যখন লোডের অধীনে থাকবে৷ এখানে লোডকে একটি সমবর্তী 1080p থেকে 720p ভিডিও হিসাবে সংজ্ঞায়িত করা হয়েছে 1080p অডিও-ভিডিও রেকর্ডিং আরম্ভের সাথে হার্ডওয়্যার ভিডিও কোডেক ব্যবহার করে শুধুমাত্র ট্রান্সকোডিং সেশন।
  • [5.3/H-1-1] লোডের অধীনে একটি 1080p 30 fps ভিডিও সেশনের জন্য 10 সেকেন্ডে (অর্থাৎ 0.333 শতাংশের কম ফ্রেম ড্রপ) 1 ফ্রেমের বেশি ড্রপ করা উচিত নয়৷ লোডকে হার্ডওয়্যার ভিডিও কোডেক ব্যবহার করে 1080p থেকে 720p ভিডিও-শুধুমাত্র ভিডিও ট্রান্সকোডিং সেশন হিসাবে সংজ্ঞায়িত করা হয়েছে, সেইসাথে একটি 128 kbps AAC অডিও প্লেব্যাক।
  • [5.3/H-1-2] লোডের অধীনে 30 fps ভিডিও সেশনে ভিডিও রেজোলিউশন পরিবর্তনের সময় 10 সেকেন্ডে 1 ফ্রেমের বেশি ড্রপ করা উচিত নয়। লোডকে হার্ডওয়্যার ভিডিও কোডেক ব্যবহার করে একটি সমবর্তী 1080p থেকে 720p ভিডিও-শুধুমাত্র ট্রান্সকোডিং সেশন হিসাবে সংজ্ঞায়িত করা হয়েছে, সেইসাথে একটি 128Kbps AAC অডিও প্লেব্যাক।
  • [5.6/H-1-1] OboeTester ট্যাপ-টু-টোন টেস্ট বা CTS ভেরিফায়ার ট্যাপ-টু-টোন টেস্ট ব্যবহার করে 100 মিলিসেকেন্ডের কম ট্যাপ-টু-টোন লেটেন্সি থাকতে হবে।
2.2.7.2। ক্যামেরা

যদি হ্যান্ডহেল্ড ডিভাইস বাস্তবায়ন android.os.Build.VERSION_CODES.MEDIA_PERFORMANCE_CLASS এর জন্য android.os.Build.VERSION_CODES.R ফেরত দেয়, তাহলে তারা:

  • [7.5/H-1-1] 4k@30fps এ ভিডিও ক্যাপচার সমর্থনকারী কমপক্ষে 12 মেগাপিক্সেলের রেজোলিউশন সহ একটি প্রাইমারি রিয়ার ফেসিং ক্যামেরা থাকতে হবে। প্রাইমারি রিয়ার-ফেসিং ক্যামেরা হল সবচেয়ে কম ক্যামেরা আইডি সহ রিয়ার-ফেসিং ক্যামেরা।
  • [7.5/H-1-2] 1080p@30fps-এ ভিডিও ক্যাপচার সমর্থনকারী কমপক্ষে 4 মেগাপিক্সেলের রেজোলিউশন সহ একটি প্রাথমিক ফ্রন্ট ফেসিং ক্যামেরা থাকতে হবে। প্রাইমারি ফ্রন্ট-ফেসিং ক্যামেরা হল ফ্রন্ট-ফেসিং ক্যামেরা যার সর্বনিম্ন ক্যামেরা আইডি।
  • [7.5/H-1-3] android.info.supportedHardwareLevel প্রপার্টিকে অবশ্যই ব্যাক প্রাইমারীর জন্য সম্পূর্ণ বা আরও ভাল এবং সীমিত বা সামনের প্রাথমিক ক্যামেরার জন্য আরও ভাল সমর্থন করতে হবে।
  • [7.5/H-1-4] ক্যামেরামেটাডেটা সমর্থন করতে হবে। উভয় প্রাথমিক ক্যামেরার জন্য SENSOR_INFO_TIMESTAMP_SOURCE_REALTIME।
  • [7.5/H-1-5] উভয় প্রাথমিক ক্যামেরার জন্য ITS আলোর অবস্থার (3000K) অধীনে CTS ক্যামেরা পারফরম্যান্স টেস্ট দ্বারা পরিমাপ করা 1080p রেজোলিউশনের জন্য camera2 JPEG ক্যাপচার লেটেন্সি < 1000ms থাকতে হবে।
  • [7.5/H-1-6] উভয় প্রাথমিক ক্যামেরার জন্য ITS লাইটিং অবস্থার (3000K) অধীনে CTS ক্যামেরা পারফরম্যান্স টেস্ট দ্বারা পরিমাপ করা ক্যামেরা2 স্টার্টআপ লেটেন্সি (প্রথম প্রিভিউ ফ্রেমে ক্যামেরা খুলুন) < 600ms থাকতে হবে।
2.2.7.3। হার্ডওয়্যার

যদি হ্যান্ডহেল্ড ডিভাইস বাস্তবায়ন android.os.Build.VERSION_CODES.MEDIA_PERFORMANCE_CLASS এর জন্য android.os.Build.VERSION_CODES.R ফেরত দেয়, তাহলে তারা:

  • [7.1.1.1/H-1-1] কমপক্ষে 1080p এর স্ক্রিন রেজোলিউশন থাকতে হবে।
  • [7.1.1.3/H-1-1] কমপক্ষে 400 dpi এর পর্দার ঘনত্ব থাকতে হবে।
  • [7.6.1/H-1-1] কমপক্ষে 6 জিবি শারীরিক মেমরি থাকতে হবে।
2.2.7.4 কর্মক্ষমতা

যদি হ্যান্ডহেল্ড ডিভাইস বাস্তবায়ন android.os.Build.VERSION_CODES.MEDIA_PERFORMANCE_CLASS এর জন্য android.os.Build.VERSION_CODES.R ফেরত দেয়, তাহলে তারা:

  • [8.2/H-1-1] কমপক্ষে 100 MB/s এর একটি ক্রমিক লেখার কার্যক্ষমতা নিশ্চিত করতে হবে।
  • [8.2/H-1-2] কমপক্ষে 10 এমবি/সেকেন্ডের একটি র্যান্ডম রাইটিং পারফরম্যান্স নিশ্চিত করতে হবে।
  • [8.2/H-1-3] কমপক্ষে 200 MB/s এর একটি অনুক্রমিক পঠন কর্মক্ষমতা নিশ্চিত করতে হবে।
  • [8.2/H-1-4] কমপক্ষে 25 MB/s এর র্যান্ডম রিড পারফরম্যান্স নিশ্চিত করতে হবে।

2.3। টেলিভিশনের প্রয়োজনীয়তা

একটি অ্যান্ড্রয়েড টেলিভিশন ডিভাইস একটি অ্যান্ড্রয়েড ডিভাইস বাস্তবায়নকে বোঝায় যা প্রায় দশ ফুট দূরে বসে থাকা ব্যবহারকারীদের জন্য ডিজিটাল মিডিয়া, চলচ্চিত্র, গেমস, অ্যাপস এবং/অথবা লাইভ টিভি ব্যবহার করার জন্য একটি বিনোদন ইন্টারফেস (একটি "পিছন ফিরে" বা "10-ফুট ব্যবহারকারী) ইন্টারফেস").

অ্যান্ড্রয়েড ডিভাইস বাস্তবায়নকে একটি টেলিভিশন হিসাবে শ্রেণীবদ্ধ করা হয় যদি তারা নিম্নলিখিত সমস্ত মানদণ্ড পূরণ করে:

  • ডিসপ্লেতে রেন্ডার করা ইউজার ইন্টারফেসকে দূরবর্তীভাবে নিয়ন্ত্রণ করার জন্য একটি প্রক্রিয়া প্রদান করেছে যা ব্যবহারকারীর থেকে দশ ফুট দূরে বসে থাকতে পারে।
  • 24 ইঞ্চির চেয়ে বড় তির্যক দৈর্ঘ্য সহ একটি এমবেডেড স্ক্রিন ডিসপ্লে রাখুন বা একটি ভিডিও আউটপুট পোর্ট অন্তর্ভুক্ত করুন, যেমন VGA, HDMI, ডিসপ্লেপোর্ট, বা প্রদর্শনের জন্য একটি বেতার পোর্ট।

এই বিভাগের বাকি অতিরিক্ত প্রয়োজনীয়তাগুলি Android টেলিভিশন ডিভাইস বাস্তবায়নের জন্য নির্দিষ্ট।

2.3.1। হার্ডওয়্যার

টেলিভিশন ডিভাইস বাস্তবায়ন:

  • [ 7.2 .2/T-0-1] ডি-প্যাড সমর্থন করতে হবে।
  • [ 7.2 .3/T-0-1] অবশ্যই হোম এবং ব্যাক ফাংশন প্রদান করতে হবে।
  • [ 7.2 .3/T-0-2] ব্যাক ফাংশন ( KEYCODE_BACK ) এর স্বাভাবিক এবং দীর্ঘ প্রেস ইভেন্ট উভয়ই ফোরগ্রাউন্ড অ্যাপ্লিকেশনে পাঠাতে হবে।
  • [ 7.2 .6.1/T-0-1] গেম কন্ট্রোলারের জন্য সমর্থন অন্তর্ভুক্ত করতে হবে এবং android.hardware.gamepad বৈশিষ্ট্য পতাকা ঘোষণা করতে হবে।
  • [ 7.2 .7/T] একটি রিমোট কন্ট্রোল প্রদান করা উচিত যেখান থেকে ব্যবহারকারীরা নন-টাচ নেভিগেশন এবং কোর নেভিগেশন কী ইনপুট অ্যাক্সেস করতে পারে।

যদি টেলিভিশন ডিভাইস বাস্তবায়নে একটি 3-অক্ষ জাইরোস্কোপ অন্তর্ভুক্ত থাকে, তারা:

  • [ 7.3 .4/T-1-1] কমপক্ষে 100 Hz ফ্রিকোয়েন্সি পর্যন্ত ইভেন্ট রিপোর্ট করতে সক্ষম হতে হবে।
  • [ 7.3 .4/T-1-2] প্রতি সেকেন্ডে 1000 ডিগ্রি পর্যন্ত অভিযোজন পরিবর্তন পরিমাপ করতে সক্ষম হতে হবে।

টেলিভিশন ডিভাইস বাস্তবায়ন:

  • [ 7.4 .3/T-0-1] ব্লুটুথ এবং ব্লুটুথ LE সমর্থন করতে হবে।
  • [ 7.6 .1/T-0-1] অ্যাপ্লিকেশন ব্যক্তিগত ডেটা (ওরফে "/ডেটা" পার্টিশন) এর জন্য কমপক্ষে 4 গিগাবাইট অ-উদ্বায়ী স্টোরেজ উপলব্ধ থাকতে হবে।

যদি টেলিভিশন ডিভাইস বাস্তবায়নে একটি USB পোর্ট অন্তর্ভুক্ত থাকে যা হোস্ট মোড সমর্থন করে, তারা:

  • [ 7.5 .3/T-1-1] একটি বাহ্যিক ক্যামেরার জন্য সমর্থন অন্তর্ভুক্ত করতে হবে যা এই USB পোর্টের মাধ্যমে সংযোগ করে তবে সবসময় সংযুক্ত থাকে না৷

যদি টিভি ডিভাইস বাস্তবায়ন 32-বিট হয়:

  • [ 7.6 .1/T-1-1] কার্নেল এবং ইউজারস্পেসে উপলব্ধ মেমরি কমপক্ষে 896MB হতে হবে যদি নিম্নলিখিত ঘনত্বগুলির মধ্যে যেকোনটি ব্যবহার করা হয়:

    • ছোট/সাধারণ স্ক্রিনে 400dpi বা উচ্চতর
    • বড় পর্দায় xhdpi বা উচ্চতর
    • অতিরিক্ত বড় পর্দায় tvdpi বা উচ্চতর

যদি টিভি ডিভাইস বাস্তবায়ন 64-বিট হয়:

  • [ 7.6 .1/T-2-1] কার্নেল এবং ইউজারস্পেসে উপলব্ধ মেমরিটি অবশ্যই কমপক্ষে 1280MB হতে হবে যদি নিম্নলিখিত ঘনত্বগুলির মধ্যে কোনটি ব্যবহার করা হয়:

    • ছোট/সাধারণ স্ক্রিনে 400dpi বা উচ্চতর
    • বড় পর্দায় xhdpi বা উচ্চতর
    • অতিরিক্ত বড় পর্দায় tvdpi বা উচ্চতর

উল্লেখ্য যে উপরের "কার্নেল এবং ব্যবহারকারীর স্থানের জন্য উপলব্ধ মেমরি" রেডিও, ভিডিও ইত্যাদির মতো হার্ডওয়্যার উপাদানগুলির জন্য নিবেদিত যে কোনও মেমরি ছাড়াও প্রদত্ত মেমরি স্পেসকে বোঝায় যা ডিভাইস বাস্তবায়নে কার্নেলের নিয়ন্ত্রণে নেই।

টেলিভিশন ডিভাইস বাস্তবায়ন:

  • [ 7.8 .1/T] একটি মাইক্রোফোন অন্তর্ভুক্ত করা উচিত।
  • [ 7.8 .2/T-0-1] একটি অডিও আউটপুট থাকতে হবে এবং android.hardware.audio.output ঘোষণা করতে হবে।

2.3.2। মাল্টিমিডিয়া

টেলিভিশন ডিভাইস বাস্তবায়ন অবশ্যই নিম্নলিখিত অডিও এনকোডিং এবং ডিকোডিং ফর্ম্যাটগুলিকে সমর্থন করবে এবং তৃতীয় পক্ষের অ্যাপ্লিকেশনগুলিতে সেগুলি উপলব্ধ করবে:

  • [ 5.1 /T-0-1] MPEG-4 AAC প্রোফাইল (AAC LC)
  • [ 5.1 /T-0-2] MPEG-4 HE AAC প্রোফাইল (AAC+)
  • [ 5.1 /T-0-3] AAC ELD (বর্ধিত কম বিলম্ব AAC)

টেলিভিশন ডিভাইস বাস্তবায়ন অবশ্যই নিম্নলিখিত ভিডিও এনকোডিং ফর্ম্যাটগুলিকে সমর্থন করে এবং তৃতীয় পক্ষের অ্যাপ্লিকেশনগুলিতে তাদের উপলব্ধ করা উচিত:

  • [ 5.2 /T-0-1] H.264
  • [ 5.2 /T-0-2] VP8

টেলিভিশন ডিভাইস বাস্তবায়ন:

  • [ 5.2 .2/T-SR] প্রতি সেকেন্ডে 30 ফ্রেমে 720p এবং 1080p রেজোলিউশন ভিডিওগুলির H.264 এনকোডিং সমর্থন করার জন্য দৃঢ়ভাবে সুপারিশ করা হয়।

টেলিভিশন ডিভাইস বাস্তবায়ন অবশ্যই নিম্নলিখিত ভিডিও ডিকোডিং ফর্ম্যাটগুলিকে সমর্থন করে এবং তৃতীয় পক্ষের অ্যাপ্লিকেশনগুলিতে তাদের উপলব্ধ করা উচিত:

টেলিভিশন ডিভাইস বাস্তবায়ন অবশ্যই MPEG-2 ডিকোডিং সমর্থন করবে, যেমনটি বিভাগ 5.3.1-এ বিশদভাবে বলা হয়েছে, স্ট্যান্ডার্ড ভিডিও ফ্রেম রেট এবং রেজোলিউশন পর্যন্ত এবং সহ:

  • [ 5.3.1 /T-1-1] HD 1080p 29.97 ফ্রেম প্রতি সেকেন্ডে মেইন প্রোফাইল হাই লেভেল সহ।
  • [ 5.3.1 /T-1-2] HD 1080i মেইন প্রোফাইল হাই লেভেল সহ 59.94 ফ্রেম প্রতি সেকেন্ডে। তাদের অবশ্যই ইন্টারলেস করা MPEG-2 ভিডিও ডিইনটারলেস করতে হবে এবং তৃতীয় পক্ষের অ্যাপ্লিকেশনগুলিতে এটি উপলব্ধ করতে হবে৷

টেলিভিশন ডিভাইস বাস্তবায়ন অবশ্যই H.264 ডিকোডিং সমর্থন করবে, যেমনটি বিভাগ 5.3.4-তে বিশদভাবে বলা হয়েছে, স্ট্যান্ডার্ড ভিডিও ফ্রেম রেট এবং রেজোলিউশন পর্যন্ত এবং সহ:

  • [ 5.3.4 /T-1-1] বেসলাইন প্রোফাইল সহ প্রতি সেকেন্ডে 60 ফ্রেমে HD 1080p
  • [ 5.3.4 /T-1-2] প্রধান প্রোফাইল সহ প্রতি সেকেন্ডে 60 ফ্রেমে HD 1080p
  • [ 5.3.4 /T-1-3] HD 1080p প্রতি সেকেন্ডে 60 ফ্রেমে হাই প্রোফাইল লেভেল 4.2 সহ

H.265 হার্ডওয়্যার ডিকোডারের সাথে টেলিভিশন ডিভাইস বাস্তবায়ন অবশ্যই H.265 ডিকোডিং সমর্থন করবে, যেমনটি বিভাগ 5.3.5-তে বিশদ বিবরণ রয়েছে, স্ট্যান্ডার্ড ভিডিও ফ্রেম রেট এবং রেজোলিউশন পর্যন্ত এবং সহ:

  • [ 5.3.5 /T-1-1] প্রধান প্রোফাইল স্তর 4.1 সহ প্রতি সেকেন্ডে 60 ফ্রেমে HD 1080p

যদি H.265 হার্ডওয়্যার ডিকোডার সহ টেলিভিশন ডিভাইস বাস্তবায়ন H.265 ডিকোডিং এবং UHD ডিকোডিং প্রোফাইল সমর্থন করে, তারা:

  • [ 5.3.5 /T-2-1] মেইন10 লেভেল 5 মেইন টিয়ার প্রোফাইলের সাথে প্রতি সেকেন্ডে 60 ফ্রেমে UHD ডিকোডিং প্রোফাইল সমর্থন করতে হবে

টেলিভিশন ডিভাইস বাস্তবায়ন অবশ্যই VP8 ডিকোডিং সমর্থন করবে, যেমনটি বিভাগ 5.3.6-এ বিশদভাবে বলা হয়েছে, স্ট্যান্ডার্ড ভিডিও ফ্রেম রেট এবং রেজোলিউশন পর্যন্ত এবং এর মধ্যে রয়েছে:

  • [ 5.3.6 /T-1-1] HD 1080p প্রতি সেকেন্ড ডিকোডিং প্রোফাইলে 60 ফ্রেমে

VP9 হার্ডওয়্যার ডিকোডারের সাথে টেলিভিশন ডিভাইস বাস্তবায়ন অবশ্যই VP9 ডিকোডিং সমর্থন করবে, যেমনটি বিভাগ 5.3.7-এ বিশদভাবে বলা হয়েছে, স্ট্যান্ডার্ড ভিডিও ফ্রেম রেট এবং রেজোলিউশন পর্যন্ত এবং সহ:

  • [ 5.3.7 /T-1-1] HD 1080p প্রতি সেকেন্ডে 60 ফ্রেমে প্রোফাইল 0 সহ (8 বিট রঙের গভীরতা)

যদি VP9 হার্ডওয়্যার ডিকোডার সহ টেলিভিশন ডিভাইস বাস্তবায়ন VP9 ডিকোডিং এবং UHD ডিকোডিং প্রোফাইল সমর্থন করে, তারা:

  • [ 5.3.7 /T-2-1] প্রোফাইল 0 (8 বিট রঙের গভীরতা) সহ প্রতি সেকেন্ডে 60 ফ্রেমে UHD ডিকোডিং প্রোফাইল সমর্থন করতে হবে।
  • [ 5.3.7 /T-2-1] প্রোফাইল 2 (10 বিট রঙের গভীরতা) সহ প্রতি সেকেন্ডে 60 ফ্রেমে UHD ডিকোডিং প্রোফাইল সমর্থন করার জন্য দৃঢ়ভাবে সুপারিশ করা হয়।

টেলিভিশন ডিভাইস বাস্তবায়ন:

  • [ 5.5 /T-0-1] কম্প্রেসড অডিও পাসথ্রু আউটপুট (যেখানে ডিভাইসে কোনো অডিও ডিকোডিং করা হয় না) ব্যতীত, সমর্থিত আউটপুটগুলিতে সিস্টেম মাস্টার ভলিউম এবং ডিজিটাল অডিও আউটপুট ভলিউমের জন্য সমর্থন অন্তর্ভুক্ত করতে হবে।

যদি টেলিভিশন ডিভাইস বাস্তবায়নে একটি বিল্ট-ইন ডিসপ্লে না থাকে, কিন্তু পরিবর্তে HDMI এর মাধ্যমে সংযুক্ত একটি বাহ্যিক প্রদর্শন সমর্থন করে, তারা:

  • [ 5.8 /T-0-1] 50Hz বা 60Hz রিফ্রেশ হারের সাথে সমর্থিত সর্বাধিক রেজোলিউশন নির্বাচন করতে HDMI আউটপুট মোড অবশ্যই সেট করতে হবে৷
  • [ 5.8 /T-SR] একটি ব্যবহারকারীকে কনফিগারযোগ্য HDMI রিফ্রেশ রেট নির্বাচক প্রদান করার জন্য দৃঢ়ভাবে সুপারিশ করা হয়।
  • [ 5.8 ] HDMI আউটপুট মোড রিফ্রেশ রেট 50Hz বা 60Hz-এ সেট করা উচিত, ডিভাইসটি যে অঞ্চলে বিক্রি করা হয়েছে তার ভিডিও রিফ্রেশ হারের উপর নির্ভর করে৷

যদি টেলিভিশন ডিভাইস বাস্তবায়নে একটি বিল্ট-ইন ডিসপ্লে না থাকে, কিন্তু পরিবর্তে HDMI এর মাধ্যমে সংযুক্ত একটি বাহ্যিক প্রদর্শন সমর্থন করে, তারা:

  • [ 5.8 /T-1-1] HDCP 2.2 সমর্থন করতে হবে।

যদি টেলিভিশন ডিভাইস বাস্তবায়ন UHD ডিকোডিং সমর্থন না করে, তবে পরিবর্তে HDMI এর মাধ্যমে সংযুক্ত একটি বহিরাগত প্রদর্শন সমর্থন করে, তারা:

  • [ 5.8 /T-2-1] HDCP 1.4 সমর্থন করতে হবে

2.3.3। সফটওয়্যার

টেলিভিশন ডিভাইস বাস্তবায়ন:

  • [ 3 /T-0-1] অবশ্যই android.software.leanback এবং android.hardware.type.television বৈশিষ্ট্যগুলি ঘোষণা করতে হবে৷
  • [ 3.2.3.1 /T-0-1] এখানে তালিকাভুক্ত নিম্নলিখিত অ্যাপ্লিকেশন ইন্টেন্টগুলি দ্বারা সংজ্ঞায়িত সমস্ত পাবলিক ইনটেন্ট ফিল্টার প্যাটার্নগুলির জন্য একটি অভিপ্রায় হ্যান্ডলারের সাথে এক বা একাধিক অ্যাপ্লিকেশন বা পরিষেবা উপাদান প্রিলোড করতে হবে৷
  • [ 3.4 .1/T-0-1] অবশ্যই android.webkit.Webview API-এর সম্পূর্ণ বাস্তবায়ন প্রদান করতে হবে।

যদি অ্যান্ড্রয়েড টেলিভিশন ডিভাইস বাস্তবায়ন একটি লক স্ক্রিন সমর্থন করে, তারা:

  • [ 3.8 .10/T-1-1] মিডিয়া বিজ্ঞপ্তি টেমপ্লেট সহ লক স্ক্রীন বিজ্ঞপ্তিগুলি অবশ্যই প্রদর্শন করতে হবে৷

টেলিভিশন ডিভাইস বাস্তবায়ন:

  • [ 3.8 .14/T-SR] পিকচার-ইন-পিকচার (পিআইপি) মোড মাল্টি-উইন্ডো সমর্থন করার জন্য দৃঢ়ভাবে সুপারিশ করা হয়।
  • [ 3.10 /T-0-1] তৃতীয় পক্ষের অ্যাক্সেসিবিলিটি পরিষেবাগুলিকে অবশ্যই সমর্থন করতে হবে৷
  • [ 3.10 /T-SR] সুইচ অ্যাক্সেস এবং টকব্যাকের (প্রি-ইন্সটল করা টেক্সট-টু-স্পিচ ইঞ্জিন দ্বারা সমর্থিত ভাষাগুলির জন্য) অ্যাক্সেসিবিলিটি পরিষেবাগুলির সাথে তুলনীয় বা তার বেশি কার্যকারিতা ডিভাইসে প্রিলোড করার জন্য দৃঢ়ভাবে সুপারিশ করা হয় যেমন টকব্যাক খোলাতে দেওয়া হয়েছে উত্স প্রকল্প

যদি টেলিভিশন ডিভাইস বাস্তবায়ন android.hardware.audio.output বৈশিষ্ট্যটি রিপোর্ট করে, তারা:

  • [ 3.11 /T-SR] ডিভাইসে উপলব্ধ ভাষাগুলিকে সমর্থন করে এমন একটি TTS ইঞ্জিন অন্তর্ভুক্ত করার জন্য দৃঢ়ভাবে সুপারিশ করা হচ্ছে৷
  • [ 3.11 /T-1-1] তৃতীয় পক্ষের TTS ইঞ্জিনগুলির ইনস্টলেশন সমর্থন করতে হবে।

টেলিভিশন ডিভাইস বাস্তবায়ন:

  • [ 3.12 /T-0-1] টিভি ইনপুট ফ্রেমওয়ার্ক সমর্থন করতে হবে।

2.3.4। কর্মক্ষমতা এবং ক্ষমতা

  • [ 8.1 /T-0-1] সামঞ্জস্যপূর্ণ ফ্রেম লেটেন্সি । অসামঞ্জস্যপূর্ণ ফ্রেম লেটেন্সি বা ফ্রেম রেন্ডার করতে বিলম্ব এক সেকেন্ডে 5 ফ্রেমের বেশি হওয়া উচিত নয় এবং এক সেকেন্ডে 1 ফ্রেমের নিচে হওয়া উচিত।
  • [ 8.2 /T-0-1] কমপক্ষে 5MB/s এর একটি ক্রমিক লেখার কার্যক্ষমতা নিশ্চিত করতে হবে।
  • [ 8.2 /T-0-2] কমপক্ষে 0.5MB/s এর একটি এলোমেলো লেখার কর্মক্ষমতা নিশ্চিত করতে হবে।
  • [ 8.2 /T-0-3] কমপক্ষে 15MB/s এর একটি অনুক্রমিক পঠন কর্মক্ষমতা নিশ্চিত করতে হবে।
  • [ 8.2 /T-0-4] কমপক্ষে 3.5MB/s এর র্যান্ডম রিড পারফরম্যান্স নিশ্চিত করতে হবে।

যদি টেলিভিশন ডিভাইস বাস্তবায়নে AOSP-তে অন্তর্ভুক্ত ডিভাইস পাওয়ার ম্যানেজমেন্ট উন্নত করার বৈশিষ্ট্যগুলি অন্তর্ভুক্ত থাকে বা AOSP-তে অন্তর্ভুক্ত বৈশিষ্ট্যগুলিকে প্রসারিত করে, তারা:

  • [ 8.3 /T-1-1] ব্যাটারি সেভার বৈশিষ্ট্য সক্রিয় এবং নিষ্ক্রিয় করার জন্য অবশ্যই ব্যবহারকারীর সামর্থ্য প্রদান করতে হবে।

যদি টেলিভিশন ডিভাইস বাস্তবায়নের ব্যাটারি না থাকে তারা:

যদি টেলিভিশন ডিভাইস বাস্তবায়নের একটি ব্যাটারি থাকে তারা:

  • [ 8.3 /T-1-3] অ্যাপ স্ট্যান্ডবাই এবং ডোজ পাওয়ার-সেভিং মোড থেকে অব্যাহতিপ্রাপ্ত সমস্ত অ্যাপ প্রদর্শনের জন্য ব্যবহারকারীর সামর্থ্য প্রদান করতে হবে।

টেলিভিশন ডিভাইস বাস্তবায়ন:

  • [ 8.4 /T-0-1] একটি প্রতি-কম্পোনেন্ট পাওয়ার প্রোফাইল প্রদান করতে হবে যা প্রতিটি হার্ডওয়্যার কম্পোনেন্টের বর্তমান খরচের মান এবং সময়ের সাথে সাথে উপাদানগুলির দ্বারা সৃষ্ট আনুমানিক ব্যাটারি ড্রেনকে সংজ্ঞায়িত করে যেমনটি Android ওপেন সোর্স প্রকল্প সাইটে নথিভুক্ত করা হয়েছে।
  • [ 8.4 /T-0-2] মিলিঅ্যাম্পিয়ার আওয়ারে (mAh) সমস্ত পাওয়ার খরচের মান রিপোর্ট করতে হবে।
  • [ 8.4 /T-0-3] প্রতিটি প্রক্রিয়ার UID প্রতি CPU পাওয়ার খরচ রিপোর্ট করতে হবে। অ্যান্ড্রয়েড ওপেন সোর্স প্রকল্প uid_cputime কার্নেল মডিউল বাস্তবায়নের মাধ্যমে প্রয়োজনীয়তা পূরণ করে।
  • [ 8.4 /T] একটি অ্যাপ্লিকেশনে হার্ডওয়্যার উপাদান শক্তি ব্যবহার বৈশিষ্ট্যযুক্ত করতে অক্ষম হলে হার্ডওয়্যার উপাদান নিজেই দায়ী করা উচিত.
  • [ 8.4 /T-0-4] অ্যাপ ডেভেলপারকে adb shell dumpsys batterystats শেল কমান্ডের মাধ্যমে এই পাওয়ার ব্যবহার উপলব্ধ করতে হবে।

2.3.5। নিরাপত্তা মডেল

টেলিভিশন ডিভাইস বাস্তবায়ন:

  • [ 9.11 /T-0-1] একটি বিচ্ছিন্ন এক্সিকিউশন এনভায়রনমেন্টের সাথে কীস্টোর বাস্তবায়নের ব্যাক আপ নিতে হবে।
  • [ 9.11 /T-0-2] সুরক্ষিতভাবে বিচ্ছিন্ন একটি এলাকায় Android কীস্টোর সিস্টেমের সমর্থিত অ্যালগরিদমগুলিকে সঠিকভাবে সমর্থন করার জন্য RSA, AES, ECDSA এবং HMAC ক্রিপ্টোগ্রাফিক অ্যালগরিদম এবং MD5, SHA1 এবং SHA-2 ফ্যামিলি হ্যাশ ফাংশনগুলির বাস্তবায়ন থাকতে হবে কার্নেল এবং উপরে চলমান কোড থেকে। সুরক্ষিত বিচ্ছিন্নতা অবশ্যই সমস্ত সম্ভাব্য প্রক্রিয়াকে অবরুদ্ধ করতে হবে যার দ্বারা কার্নেল বা ইউজারস্পেস কোড ডিএমএ সহ বিচ্ছিন্ন পরিবেশের অভ্যন্তরীণ অবস্থা অ্যাক্সেস করতে পারে। আপস্ট্রিম অ্যান্ড্রয়েড ওপেন সোর্স প্রজেক্ট (AOSP) ট্রাস্টি বাস্তবায়ন ব্যবহার করে এই প্রয়োজনীয়তা পূরণ করে, কিন্তু অন্য একটি ARM TrustZone-ভিত্তিক সমাধান বা একটি সঠিক হাইপারভাইজার-ভিত্তিক বিচ্ছিন্নতার একটি তৃতীয় পক্ষের পর্যালোচনা করা নিরাপদ বাস্তবায়ন হল বিকল্প বিকল্প।
  • [ 9.11 /T-0-3] বিচ্ছিন্ন এক্সিকিউশন পরিবেশে অবশ্যই লক স্ক্রিন প্রমাণীকরণ করতে হবে এবং শুধুমাত্র সফল হলেই প্রমাণীকরণ-বাউন্ড কীগুলি ব্যবহার করার অনুমতি দিন৷ লক স্ক্রিন শংসাপত্রগুলি অবশ্যই এমনভাবে সংরক্ষণ করা উচিত যা শুধুমাত্র বিচ্ছিন্ন এক্সিকিউশন পরিবেশকে লক স্ক্রিন প্রমাণীকরণ করতে দেয়৷ আপস্ট্রিম অ্যান্ড্রয়েড ওপেন সোর্স প্রজেক্ট গেটকিপার হার্ডওয়্যার অ্যাবস্ট্রাকশন লেয়ার (HAL) এবং ট্রাস্টি প্রদান করে, যা এই প্রয়োজনীয়তা মেটাতে ব্যবহার করা যেতে পারে।
  • [ 9.11 /T-0-4] মূল প্রত্যয়নকে সমর্থন করতে হবে যেখানে সত্যায়ন স্বাক্ষর কী সুরক্ষিত হার্ডওয়্যার দ্বারা সুরক্ষিত থাকে এবং সাইনিং নিরাপদ হার্ডওয়্যারে সঞ্চালিত হয়। প্রত্যয়ন স্বাক্ষরকারী কীগুলিকে ডিভাইস শনাক্তকারী হিসাবে ব্যবহার করা থেকে আটকাতে যথেষ্ট সংখ্যক ডিভাইস জুড়ে শেয়ার করা আবশ্যক৷ এই প্রয়োজনীয়তা পূরণের একটি উপায় হল একই প্রত্যয়ন কী শেয়ার করা যদি না একটি প্রদত্ত SKU-এর কমপক্ষে 100,000 ইউনিট তৈরি করা হয়। যদি একটি SKU-এর 100,000 ইউনিটের বেশি উত্পাদিত হয়, তাহলে প্রতিটি 100,000 ইউনিটের জন্য একটি ভিন্ন কী ব্যবহার করা যেতে পারে।

মনে রাখবেন যে যদি একটি ডিভাইস বাস্তবায়ন ইতিমধ্যেই একটি পূর্ববর্তী অ্যান্ড্রয়েড সংস্করণে চালু করা হয়, তাহলে এই ধরনের ডিভাইসটিকে একটি বিচ্ছিন্ন এক্সিকিউশন এনভায়রনমেন্ট দ্বারা সমর্থিত একটি কীস্টোর থাকা এবং কী প্রত্যয়ন সমর্থন করার প্রয়োজনীয়তা থেকে অব্যাহতি দেওয়া হয়, যদি না এটি android.hardware.fingerprint বৈশিষ্ট্যটি ঘোষণা করে যা একটি বিচ্ছিন্ন এক্সিকিউশন পরিবেশ দ্বারা সমর্থিত একটি কীস্টোর প্রয়োজন।

যদি টেলিভিশন ডিভাইস বাস্তবায়ন একটি নিরাপদ লক স্ক্রীন সমর্থন করে, তারা:

  • [ 9.11 /T-1-1] 15 সেকেন্ড বা তার কম পর্যন্ত ন্যূনতম অনুমোদিত টাইমআউট সহ ব্যবহারকারীকে আনলক করা থেকে লক অবস্থায় পরিবর্তনের জন্য স্লিপ টাইমআউট বেছে নেওয়ার অনুমতি দিতে হবে।

যদি টেলিভিশন ডিভাইস বাস্তবায়নে একাধিক ব্যবহারকারী অন্তর্ভুক্ত থাকে এবং android.hardware.telephony বৈশিষ্ট্য পতাকা ঘোষণা না করে, তারা:

  • [ 9.5 /T-2-1] সীমাবদ্ধ প্রোফাইলগুলিকে অবশ্যই সমর্থন করতে হবে, এমন একটি বৈশিষ্ট্য যা ডিভাইসের মালিকদের ডিভাইসে অতিরিক্ত ব্যবহারকারী এবং তাদের ক্ষমতা পরিচালনা করতে দেয়৷ সীমাবদ্ধ প্রোফাইলগুলির সাথে, ডিভাইসের মালিকরা অতিরিক্ত ব্যবহারকারীদের জন্য কাজ করার জন্য দ্রুত আলাদা পরিবেশ সেট আপ করতে পারে, সেই পরিবেশে উপলব্ধ অ্যাপগুলিতে সূক্ষ্ম সীমাবদ্ধতা পরিচালনা করার ক্ষমতা সহ।

যদি টেলিভিশন ডিভাইস বাস্তবায়নে একাধিক ব্যবহারকারী অন্তর্ভুক্ত থাকে এবং android.hardware.telephony বৈশিষ্ট্য পতাকা ঘোষণা করে, তারা:

  • [ 9.5 /T-3-1] সীমাবদ্ধ প্রোফাইলগুলিকে সমর্থন করা উচিত নয় তবে অন্য ব্যবহারকারীদের ভয়েস কল এবং এসএমএস অ্যাক্সেস করতে সক্ষম/অক্ষম করতে নিয়ন্ত্রণগুলির AOSP বাস্তবায়নের সাথে সারিবদ্ধ হওয়া উচিত।

2.3.6। বিকাশকারী সরঞ্জাম এবং বিকল্প সামঞ্জস্য

টেলিভিশন ডিভাইস বাস্তবায়ন:

  • পারফেটো
    • [ 6.1 /T-0-1] শেল ব্যবহারকারীর কাছে অবশ্যই একটি /system/bin/perfetto বাইনারি প্রকাশ করতে হবে যা cmdline পারফেটো ডকুমেন্টেশন মেনে চলে।
    • [ 6.1 /T-0-2] পারফেটো বাইনারিকে অবশ্যই একটি প্রোটোবাফ কনফিগার ইনপুট হিসাবে গ্রহণ করতে হবে যা পারফেটো ডকুমেন্টেশনে সংজ্ঞায়িত স্কিমার সাথে সঙ্গতিপূর্ণ।
    • [ 6.1 /T-0-3] পারফেটো বাইনারিকে অবশ্যই আউটপুট হিসাবে একটি প্রোটোবাফ ট্রেস লিখতে হবে যা পারফেটো ডকুমেন্টেশনে সংজ্ঞায়িত স্কিমার সাথে সঙ্গতিপূর্ণ।
    • [ 6.1 /T-0-4] পারফেটো বাইনারির মাধ্যমে অবশ্যই পারফেটো ডকুমেন্টেশনে বর্ণিত ডেটা উত্সগুলি অবশ্যই প্রদান করতে হবে৷

2.4। প্রয়োজনীয়তা দেখুন

একটি অ্যান্ড্রয়েড ওয়াচ ডিভাইস একটি অ্যান্ড্রয়েড ডিভাইস বাস্তবায়নকে বোঝায় যা শরীরে, সম্ভবত কব্জিতে পরিধান করার উদ্দেশ্যে।

অ্যান্ড্রয়েড ডিভাইস বাস্তবায়নকে একটি ওয়াচ হিসাবে শ্রেণীবদ্ধ করা হয় যদি তারা নিম্নলিখিত সমস্ত মানদণ্ড পূরণ করে:

  • 1.1 থেকে 2.5 ইঞ্চি পরিসরে ভৌত তির্যক দৈর্ঘ্য সহ একটি পর্দা রাখুন৷
  • শরীরে পরিধান করার জন্য একটি ব্যবস্থা রাখুন।

এই বিভাগের বাকি অতিরিক্ত প্রয়োজনীয়তাগুলি Android ওয়াচ ডিভাইস বাস্তবায়নের জন্য নির্দিষ্ট।

2.4.1। হার্ডওয়্যার

ডিভাইস বাস্তবায়ন দেখুন:

  • [ 7.1 .1.1/W-0-1] 1.1 থেকে 2.5 ইঞ্চি পরিসরে ভৌত তির্যক আকার সহ একটি স্ক্রিন থাকতে হবে৷

  • [ 7.2 .3/W-0-1] ব্যবহারকারীর জন্য অবশ্যই হোম ফাংশন উপলব্ধ থাকতে হবে এবং ব্যাক ফাংশনটি UI_MODE_TYPE_WATCH এ থাকা ছাড়া।

  • [ 7.2 .4/W-0-1] টাচস্ক্রিন ইনপুট সমর্থন করতে হবে।

  • [ 7.3 .1/W-SR] একটি 3-অক্ষ অ্যাক্সিলোমিটার অন্তর্ভুক্ত করার জন্য দৃঢ়ভাবে সুপারিশ করা হয়।

যদি ওয়াচ ডিভাইস বাস্তবায়নে একটি GPS/GNSS রিসিভার অন্তর্ভুক্ত থাকে এবং android.hardware.location.gps বৈশিষ্ট্যের পতাকার মাধ্যমে অ্যাপ্লিকেশনগুলির সক্ষমতা সম্পর্কে রিপোর্ট করে, তারা:

  • [ 7.3 .3/W-1-1] GNSS পরিমাপের রিপোর্ট করতে হবে, যত তাড়াতাড়ি সেগুলি পাওয়া যায়, এমনকি যদি GPS/GNSS থেকে গণনা করা একটি অবস্থান এখনও রিপোর্ট করা না হয়।
  • [ 7.3 .3/W-1-2] জিএনএসএস সিউডোরেঞ্জ এবং সিউডোরেঞ্জ রেটগুলি অবশ্যই রিপোর্ট করতে হবে, যে, অবস্থান নির্ণয় করার পরে খোলা আকাশের অবস্থায়, স্থির বা ত্বরণের প্রতি সেকেন্ডে 0.2 মিটারের কম গতিতে চলাকালীন, গণনা করার জন্য যথেষ্ট 20 মিটারের মধ্যে অবস্থান, এবং গতি প্রতি সেকেন্ডে 0.2 মিটারের মধ্যে, অন্তত 95% সময়ের মধ্যে।

যদি ওয়াচ ডিভাইস বাস্তবায়নে একটি 3-অক্ষ জাইরোস্কোপ অন্তর্ভুক্ত থাকে, তারা:

  • [ 7.3 .4/W-2-1] প্রতি সেকেন্ডে 1000 ডিগ্রি পর্যন্ত অভিযোজন পরিবর্তন পরিমাপ করতে সক্ষম হতে হবে।

ডিভাইস বাস্তবায়ন দেখুন:

  • [ 7.4 .3/W-0-1] ব্লুটুথ সমর্থন করতে হবে।

  • [ 7.6 .1/W-0-1] অ্যাপ্লিকেশন প্রাইভেট ডেটা (ওরফে "/ডেটা" পার্টিশন) এর জন্য কমপক্ষে 1 গিগাবাইট অ-উদ্বায়ী স্টোরেজ উপলব্ধ থাকতে হবে।

  • [ 7.6 .1/W-0-2] কার্নেল এবং ইউজারস্পেসে কমপক্ষে 416 এমবি মেমরি থাকা আবশ্যক।

  • [ 7.8 .1/W-0-1] একটি মাইক্রোফোন অন্তর্ভুক্ত করা আবশ্যক।

  • [ 7.8 .2/W] অডিও আউটপুট থাকতে পারে।

2.4.2। মাল্টিমিডিয়া

কোন অতিরিক্ত প্রয়োজনীয়তা.

2.4.3। সফটওয়্যার

ডিভাইস বাস্তবায়ন দেখুন:

  • [ 3 /W-0-1] android.hardware.type.watch বৈশিষ্ট্যটি অবশ্যই ঘোষণা করতে হবে।
  • [ 3 /W-0-2] uiMode = UI_MODE_TYPE_WATCH সমর্থন করতে হবে।
  • [ 3.2.3.1 /W-0-1] এখানে তালিকাভুক্ত নিম্নলিখিত অ্যাপ্লিকেশন ইন্টেন্ট দ্বারা সংজ্ঞায়িত সমস্ত পাবলিক ইনটেন্ট ফিল্টার প্যাটার্নগুলির জন্য একটি অভিপ্রায় হ্যান্ডলারের সাথে এক বা একাধিক অ্যাপ্লিকেশন বা পরিষেবা উপাদান প্রিলোড করতে হবে৷

ডিভাইস বাস্তবায়ন দেখুন:

  • [ 3.8 .4/W-SR] অ্যাসিস্ট অ্যাকশন পরিচালনা করার জন্য ডিভাইসে একজন সহকারীকে প্রয়োগ করার জন্য দৃঢ়ভাবে সুপারিশ করা হচ্ছে।

ডিভাইস বাস্তবায়ন দেখুন যা android.hardware.audio.output বৈশিষ্ট্য পতাকা ঘোষণা করে:

  • [ 3.10 /W-1-1] তৃতীয় পক্ষের অ্যাক্সেসিবিলিটি পরিষেবাগুলিকে অবশ্যই সমর্থন করতে হবে৷
  • [ 3.10 /W-SR] সুইচ অ্যাক্সেস এবং টকব্যাকের (প্রি-ইন্সটল করা টেক্সট-টু-স্পিচ ইঞ্জিন দ্বারা সমর্থিত ভাষাগুলির জন্য) অ্যাক্সেসিবিলিটি পরিষেবাগুলির সাথে তুলনীয় বা তার বেশি কার্যকারিতা ডিভাইসে প্রিলোড করার জন্য দৃঢ়ভাবে সুপারিশ করা হয় যেমন টকব্যাক খোলাতে দেওয়া হয়েছে উত্স প্রকল্প

যদি ওয়াচ ডিভাইস বাস্তবায়ন android.hardware.audio.output বৈশিষ্ট্যটি রিপোর্ট করে, তারা:

  • [ 3.11 /W-SR] ডিভাইসে উপলব্ধ ভাষাগুলিকে সমর্থন করে এমন একটি TTS ইঞ্জিন অন্তর্ভুক্ত করার জন্য দৃঢ়ভাবে সুপারিশ করা হচ্ছে।

  • [ 3.11 /W-0-1] তৃতীয় পক্ষের TTS ইঞ্জিনগুলির ইনস্টলেশন সমর্থন করতে হবে।

2.4.4। কর্মক্ষমতা এবং ক্ষমতা

ওয়াচ ডিভাইস বাস্তবায়নে যদি AOSP-তে অন্তর্ভুক্ত ডিভাইস পাওয়ার ম্যানেজমেন্ট উন্নত করার বৈশিষ্ট্যগুলি অন্তর্ভুক্ত থাকে বা AOSP-তে অন্তর্ভুক্ত বৈশিষ্ট্যগুলি প্রসারিত করা হয়, তারা:

  • [ 8.3 /W-SR] অ্যাপ স্ট্যান্ডবাই এবং ডোজ পাওয়ার-সেভিং মোড থেকে অব্যাহতিপ্রাপ্ত সমস্ত অ্যাপ প্রদর্শন করার জন্য ব্যবহারকারীর সামর্থ্য প্রদানের জন্য দৃঢ়ভাবে সুপারিশ করা হয়।
  • [ 8.3 /W-SR] ব্যাটারি সেভার বৈশিষ্ট্য সক্রিয় এবং নিষ্ক্রিয় করার জন্য ব্যবহারকারীর সামর্থ্য প্রদানের জন্য দৃঢ়ভাবে সুপারিশ করা হয়।

ডিভাইস বাস্তবায়ন দেখুন:

  • [ 8.4 /W-0-1] একটি প্রতি-কম্পোনেন্ট পাওয়ার প্রোফাইল প্রদান করতে হবে যা প্রতিটি হার্ডওয়্যার কম্পোনেন্টের বর্তমান খরচের মান এবং সময়ের সাথে সাথে উপাদানগুলির দ্বারা সৃষ্ট আনুমানিক ব্যাটারি ড্রেনকে সংজ্ঞায়িত করে যেমনটি Android ওপেন সোর্স প্রকল্প সাইটে নথিভুক্ত করা হয়েছে।
  • [ 8.4 /W-0-2] মিলিঅ্যাম্পিয়ার আওয়ারে (mAh) সমস্ত পাওয়ার খরচের মান রিপোর্ট করতে হবে।
  • [ 8.4 /W-0-3] প্রতিটি প্রক্রিয়ার UID প্রতি CPU পাওয়ার খরচ রিপোর্ট করতে হবে। অ্যান্ড্রয়েড ওপেন সোর্স প্রকল্প uid_cputime কার্নেল মডিউল বাস্তবায়নের মাধ্যমে প্রয়োজনীয়তা পূরণ করে।
  • [ 8.4 /W-0-4] অ্যাপ ডেভেলপারকে adb shell dumpsys batterystats শেল কমান্ডের মাধ্যমে এই পাওয়ার ব্যবহার উপলব্ধ করা আবশ্যক।
  • [ 8.4 /W] একটি অ্যাপ্লিকেশনে হার্ডওয়্যার উপাদান শক্তি ব্যবহার বৈশিষ্ট্যযুক্ত করতে অক্ষম হলে হার্ডওয়্যার উপাদান নিজেই দায়ী করা উচিত.

2.4.5। নিরাপত্তা মডেল

যদি ওয়াচ ডিভাইস বাস্তবায়নে একাধিক ব্যবহারকারী অন্তর্ভুক্ত থাকে এবং android.hardware.telephony বৈশিষ্ট্যের পতাকা ঘোষণা না করে, তারা:

  • [ 9.5 /W-1-1] সীমাবদ্ধ প্রোফাইলগুলিকে অবশ্যই সমর্থন করতে হবে, এমন একটি বৈশিষ্ট্য যা ডিভাইসের মালিকদের ডিভাইসে অতিরিক্ত ব্যবহারকারী এবং তাদের ক্ষমতা পরিচালনা করতে দেয়। সীমাবদ্ধ প্রোফাইলগুলির সাথে, ডিভাইসের মালিকরা অতিরিক্ত ব্যবহারকারীদের জন্য কাজ করার জন্য দ্রুত আলাদা পরিবেশ সেট আপ করতে পারে, সেই পরিবেশে উপলব্ধ অ্যাপগুলিতে সূক্ষ্ম সীমাবদ্ধতা পরিচালনা করার ক্ষমতা সহ।

যদি ওয়াচ ডিভাইস বাস্তবায়নে একাধিক ব্যবহারকারী অন্তর্ভুক্ত থাকে এবং android.hardware.telephony বৈশিষ্ট্য পতাকা ঘোষণা করে, তারা:

  • [ 9.5 /W-2-1] সীমাবদ্ধ প্রোফাইলগুলিকে সমর্থন করা উচিত নয় তবে অন্য ব্যবহারকারীদের ভয়েস কল এবং এসএমএস অ্যাক্সেস করতে সক্ষম/অক্ষম করতে নিয়ন্ত্রণগুলির AOSP বাস্তবায়নের সাথে সারিবদ্ধ হওয়া উচিত।

2.5। স্বয়ংচালিত প্রয়োজনীয়তা

অ্যান্ড্রয়েড অটোমোটিভ ইমপ্লিমেন্টেশন বলতে বোঝায় অপারেটিং সিস্টেম হিসেবে অ্যান্ড্রয়েড চালিত গাড়ির হেড ইউনিটকে আংশিক বা সমস্ত সিস্টেম এবং/অথবা ইনফোটেইনমেন্ট কার্যকারিতার জন্য।

যদি তারা android.hardware.type.automotive বৈশিষ্ট্যটি ঘোষণা করে বা নিম্নলিখিত সমস্ত মানদণ্ড পূরণ করে তাহলে Android ডিভাইস বাস্তবায়নকে একটি স্বয়ংচালিত হিসাবে শ্রেণীবদ্ধ করা হয়৷

  • একটি স্বয়ংচালিত যানবাহনের অংশ হিসাবে এমবেড করা বা প্লাগ করা যায়।
  • প্রাথমিক ডিসপ্লে হিসাবে ড্রাইভারের সিটের সারিতে একটি স্ক্রিন ব্যবহার করছেন।

এই বিভাগের বাকি অতিরিক্ত প্রয়োজনীয়তাগুলি Android Automotive ডিভাইস বাস্তবায়নের জন্য নির্দিষ্ট।

2.5.1। হার্ডওয়্যার

স্বয়ংচালিত ডিভাইস বাস্তবায়ন:

  • [ 7.1 .1.1/A-0-1] শারীরিক তির্যক আকারে কমপক্ষে 6 ইঞ্চি স্ক্রিন থাকতে হবে।
  • [ 7.1 .1.1/A-0-2] কমপক্ষে 750 dp x 480 dp এর একটি স্ক্রীন সাইজ লেআউট থাকতে হবে।

  • [ 7.2 .3/A-0-1] অবশ্যই হোম ফাংশন প্রদান করতে হবে এবং ব্যাক এবং রিসেন্ট ফাংশন প্রদান করতে পারে।

  • [ 7.2 .3/A-0-2] ব্যাক ফাংশন ( KEYCODE_BACK ) এর স্বাভাবিক এবং দীর্ঘ প্রেস ইভেন্ট উভয়ই ফোরগ্রাউন্ড অ্যাপ্লিকেশনে পাঠাতে হবে।
  • [ 7.3 /A-0-1] GEAR_SELECTION , NIGHT_MODE , PERF_VEHICLE_SPEED এবং PARKING_BRAKE_ON অবশ্যই বাস্তবায়ন এবং রিপোর্ট করতে হবে।
  • [ 7.3 /A-0-2] NIGHT_MODE পতাকার মান অবশ্যই ড্যাশবোর্ড ডে/নাইট মোডের সাথে সামঞ্জস্যপূর্ণ হতে হবে এবং পরিবেষ্টিত আলো সেন্সর ইনপুটের উপর ভিত্তি করে হওয়া উচিত। অন্তর্নিহিত পরিবেষ্টিত আলো সেন্সর ফটোমিটারের মতোই হতে পারে।
  • [ 7.3 /A-0-3] প্রদত্ত প্রতিটি সেন্সরের জন্য সেন্সরঅতিরিক্ত তথ্যের অংশ হিসাবে সেন্সর অতিরিক্ত তথ্য ক্ষেত্র TYPE_SENSOR_PLACEMENT অবশ্যই প্রদান করতে হবে।
  • [ 7.3 /A-0-1] অতিরিক্ত সেন্সরগুলির সাথে জিপিএস/জিএনএসএস ফিউজ করে লোকেশন ডেড রেকন করতে পারে৷ যদি অবস্থানটি মৃত হিসাবে গণ্য করা হয়, তবে সংশ্লিষ্ট সেন্সর প্রকার এবং/অথবা যানবাহনের সম্পত্তি আইডিগুলি প্রয়োগ এবং রিপোর্ট করার জন্য এটি দৃঢ়ভাবে সুপারিশ করা হয়।
  • [ 7.3 /A-0-2] LocationManager#requestLocationUpdates() এর মাধ্যমে অনুরোধ করা অবস্থানটি অবশ্যই মানচিত্রের সাথে মিলে যাবে না।

যদি স্বয়ংচালিত ডিভাইস বাস্তবায়নে একটি 3-অক্ষ অ্যাক্সিলোমিটার অন্তর্ভুক্ত থাকে, তারা:

যদি স্বয়ংচালিত ডিভাইস বাস্তবায়নে একটি 3-অক্ষ জাইরোস্কোপ অন্তর্ভুক্ত থাকে, তারা:

  • [ 7.3 .4/A-2-1] কমপক্ষে 100 Hz ফ্রিকোয়েন্সি পর্যন্ত ইভেন্ট রিপোর্ট করতে সক্ষম হতে হবে।
  • [ 7.3 .4/A-2-2] এছাড়াও TYPE_GYROSCOPE_UNCALIBRATED সেন্সর প্রয়োগ করতে হবে৷
  • [ 7.3 .4/A-2-3] প্রতি সেকেন্ডে 250 ডিগ্রি পর্যন্ত অভিযোজন পরিবর্তন পরিমাপ করতে সক্ষম হতে হবে।
  • [ 7.3 .4/A-SR] সম্ভাব্য রেজোলিউশন সর্বাধিক করার জন্য জাইরোস্কোপের পরিমাপ পরিসীমা +/-250dps-এ কনফিগার করার জন্য দৃঢ়ভাবে সুপারিশ করা হয়

যদি স্বয়ংচালিত ডিভাইস বাস্তবায়নে একটি GPS/GNSS রিসিভার অন্তর্ভুক্ত থাকে তবে সেলুলার নেটওয়ার্ক-ভিত্তিক ডেটা সংযোগ অন্তর্ভুক্ত না করে, তারা:

  • [ 7.3 .3/A-3-1] GPS/GNSS রিসিভারটি প্রথমবার চালু হলে বা 4+ দিন পরে 60 সেকেন্ডের মধ্যে অবস্থান নির্ধারণ করতে হবে।
  • [ 7.3 .3/A-3-2] অন্যান্য সমস্ত অবস্থানের অনুরোধের জন্য 7.3.3/C-1-2 এবং 7.3.3/C-1-6- এ বর্ণিত সময়-টু-ফার্স্ট-ফিক্সের মানদণ্ড অবশ্যই পূরণ করতে হবে ( অর্থাৎ অনুরোধ যা প্রথমবার নয় বা 4+ দিন পরে)। প্রয়োজনীয়তা 7.3.3/C-1-2 সাধারণত সেলুলার নেটওয়ার্ক-ভিত্তিক ডেটা সংযোগবিহীন যানবাহনে পূরণ করা হয়, রিসিভারে গণনা করা GNSS কক্ষপথের পূর্বাভাস ব্যবহার করে, অথবা শেষ জ্ঞাত যানবাহনের অবস্থান ব্যবহার করে এর জন্য ডেড রেকন করার ক্ষমতা ব্যবহার করে 7.3.3/C-1-3 সন্তোষজনক অবস্থান নির্ভুলতা সহ কমপক্ষে 60 সেকেন্ড, বা উভয়ের সংমিশ্রণ।

স্বয়ংচালিত ডিভাইস বাস্তবায়ন:

  • [ 7.4 .3/A-0-1] অবশ্যই ব্লুটুথ সমর্থন করতে হবে এবং ব্লুটুথ LE সমর্থন করা উচিত৷
  • [ 7.4 .3/A-0-2] অ্যান্ড্রয়েড অটোমোটিভ প্রয়োগগুলি অবশ্যই নিম্নলিখিত ব্লুটুথ প্রোফাইলগুলিকে সমর্থন করবে:
    • হ্যান্ডস-ফ্রি প্রোফাইলে ফোন কলিং (HFP)।
    • অডিও ডিস্ট্রিবিউশন প্রোফাইলে মিডিয়া প্লেব্যাক (A2DP)।
    • রিমোট কন্ট্রোল প্রোফাইল (AVRCP) এর উপর মিডিয়া প্লেব্যাক নিয়ন্ত্রণ।
    • ফোন বুক অ্যাক্সেস প্রোফাইল (PBAP) ব্যবহার করে যোগাযোগ শেয়ার করা।
  • [ 7.4 .3/A-SR] বার্তা অ্যাক্সেস প্রোফাইল (MAP) সমর্থন করার জন্য দৃঢ়ভাবে সুপারিশ করা হয়।

  • [ 7.4 .5/A] সেলুলার নেটওয়ার্ক-ভিত্তিক ডেটা সংযোগের জন্য সমর্থন অন্তর্ভুক্ত করা উচিত।

  • [ 7.4 .5/A] সিস্টেম অ্যাপের জন্য উপলব্ধ নেটওয়ার্কগুলির জন্য সিস্টেম API NetworkCapabilities#NET_CAPABILITY_OEM_PAID ধ্রুবক ব্যবহার করতে পারে৷

একটি বহিরাগত ভিউ ক্যামেরা হল একটি ক্যামেরা যা ড্যাশক্যামের মতো ডিভাইস বাস্তবায়নের বাইরের দৃশ্যগুলিকে চিত্রিত করে৷

স্বয়ংচালিত ডিভাইস বাস্তবায়ন:

  • এক বা একাধিক বাহ্যিক দৃশ্য ক্যামেরা অন্তর্ভুক্ত করা উচিত।

যদি স্বয়ংচালিত ডিভাইস বাস্তবায়নে একটি বহিরাগত ভিউ ক্যামেরা অন্তর্ভুক্ত থাকে, এই ধরনের ক্যামেরার জন্য, তারা:

  • [ 7.5 /A-1-1] অ্যান্ড্রয়েড ক্যামেরা API-এর মাধ্যমে অ্যাক্সেসযোগ্য বাহ্যিক দৃশ্য ক্যামেরা থাকা উচিত নয়, যদি না তারা ক্যামেরার মূল প্রয়োজনীয়তাগুলি মেনে চলে।
  • [ 7.5 /A-SR] ক্যামেরা প্রিভিউ ঘোরানো বা অনুভূমিকভাবে মিরর না করার জন্য দৃঢ়ভাবে সুপারিশ করা হয়।
  • [ 7.5 .5/A-SR] ক্যামেরার লম্বা ডাইমেনশন দিগন্তের সাথে সারিবদ্ধ হওয়ার জন্য দৃঢ়ভাবে সুপারিশ করা হয়।
  • [ 7.5 /A-SR] কমপক্ষে 1.3 মেগাপিক্সেলের রেজোলিউশন থাকার জন্য দৃঢ়ভাবে সুপারিশ করা হয়।
  • ফিক্সড-ফোকাস বা EDOF (ক্ষেত্রের বর্ধিত গভীরতা) হার্ডওয়্যার থাকতে হবে।
  • অ্যান্ড্রয়েড সিঙ্ক্রোনাইজেশন ফ্রেমওয়ার্ক সমর্থন করা উচিত।
  • ক্যামেরা ড্রাইভারে হার্ডওয়্যার অটো-ফোকাস বা সফ্টওয়্যার অটো-ফোকাস লাগানো থাকতে পারে।

স্বয়ংচালিত ডিভাইস বাস্তবায়ন:

  • [ 7.6 .1/A-0-1] অ্যাপ্লিকেশন ব্যক্তিগত ডেটা (ওরফে "/ডেটা" পার্টিশন) এর জন্য কমপক্ষে 4 গিগাবাইট অ-উদ্বায়ী স্টোরেজ উপলব্ধ থাকতে হবে।

  • [ 7.6 .1/A] ফ্ল্যাশ স্টোরেজে উন্নত কর্মক্ষমতা এবং দীর্ঘায়ু প্রদানের জন্য ডেটা পার্টিশন ফরম্যাট করা উচিত, উদাহরণস্বরূপ f2fs ফাইল-সিস্টেম ব্যবহার করা।

যদি স্বয়ংচালিত ডিভাইস বাস্তবায়নগুলি অভ্যন্তরীণ অপসারণযোগ্য স্টোরেজের একটি অংশের মাধ্যমে ভাগ করা বাহ্যিক স্টোরেজ সরবরাহ করে, তারা:

  • [ 7.6 .1/A-SR] বাহ্যিক সঞ্চয়স্থানে সম্পাদিত অপারেশনগুলিতে I/O ওভারহেড কমানোর জন্য দৃঢ়ভাবে সুপারিশ করা হয়, উদাহরণস্বরূপ SDCardFS ব্যবহার করে।

যদি স্বয়ংচালিত ডিভাইস বাস্তবায়ন 32-বিট হয়:

  • [ 7.6 .1/A-1-1] কার্নেল এবং ইউজারস্পেসে উপলব্ধ মেমরি অবশ্যই কমপক্ষে 512MB হতে হবে যদি নিম্নলিখিত ঘনত্বগুলির মধ্যে কোনটি ব্যবহার করা হয়:

    • ছোট/সাধারণ স্ক্রিনে 280dpi বা কম
    • অতিরিক্ত বড় পর্দায় ldpi বা নিম্ন
    • বড় স্ক্রিনে mdpi বা কম
  • [ 7.6 .1/A-1-2] কার্নেল এবং ইউজারস্পেসে উপলব্ধ মেমরি অবশ্যই কমপক্ষে 608MB হতে হবে যদি নিম্নলিখিত ঘনত্বগুলির মধ্যে কোনটি ব্যবহার করা হয়:

    • ছোট/সাধারণ স্ক্রিনে xhdpi বা উচ্চতর
    • বড় পর্দায় hdpi বা উচ্চতর
    • অতিরিক্ত বড় স্ক্রিনে mdpi বা উচ্চতর
  • [ 7.6 .1/A-1-3] কার্নেল এবং ইউজারস্পেসে উপলব্ধ মেমরি কমপক্ষে 896MB হতে হবে যদি নিম্নলিখিত ঘনত্বগুলির মধ্যে যেকোনটি ব্যবহার করা হয়:

    • ছোট/সাধারণ স্ক্রিনে 400dpi বা উচ্চতর
    • বড় পর্দায় xhdpi বা উচ্চতর
    • অতিরিক্ত বড় পর্দায় tvdpi বা উচ্চতর
  • [ 7.6 .1/A-1-4] কার্নেল এবং ইউজারস্পেসে উপলব্ধ মেমরি কমপক্ষে 1344MB হতে হবে যদি নিম্নলিখিত ঘনত্বগুলির মধ্যে যেকোনটি ব্যবহার করা হয়:

    • ছোট/স্বাভাবিক স্ক্রিনে 560dpi বা উচ্চতর
    • বড় পর্দায় 400dpi বা উচ্চতর
    • অতিরিক্ত বড় স্ক্রিনে xhdpi বা উচ্চতর

যদি স্বয়ংচালিত ডিভাইস বাস্তবায়ন 64-বিট হয়:

  • [ 7.6 .1/A-2-1] কার্নেল এবং ইউজারস্পেসে উপলব্ধ মেমরি অবশ্যই কমপক্ষে 816MB হতে হবে যদি নিম্নলিখিত ঘনত্বগুলির মধ্যে কোনটি ব্যবহার করা হয়:

    • ছোট/সাধারণ স্ক্রিনে 280dpi বা কম
    • অতিরিক্ত বড় পর্দায় ldpi বা নিম্ন
    • বড় স্ক্রিনে mdpi বা কম
  • [ 7.6 .1/A-2-2] কার্নেল এবং ইউজারস্পেসে উপলব্ধ মেমরি কমপক্ষে 944MB হতে হবে যদি নিম্নলিখিত ঘনত্বগুলির মধ্যে যেকোনটি ব্যবহার করা হয়:

    • ছোট/সাধারণ স্ক্রিনে xhdpi বা উচ্চতর
    • বড় পর্দায় hdpi বা উচ্চতর
    • অতিরিক্ত বড় স্ক্রিনে mdpi বা উচ্চতর
  • [ 7.6 .1/A-2-3] কার্নেল এবং ইউজারস্পেসে উপলব্ধ মেমরিটি অবশ্যই কমপক্ষে 1280MB হতে হবে যদি নিম্নলিখিত ঘনত্বগুলির মধ্যে কোনটি ব্যবহার করা হয়:

    • ছোট/সাধারণ স্ক্রিনে 400dpi বা উচ্চতর
    • বড় পর্দায় xhdpi বা উচ্চতর
    • অতিরিক্ত বড় পর্দায় tvdpi বা উচ্চতর
  • [ 7.6 .1/A-2-4] কার্নেল এবং ইউজারস্পেসে উপলব্ধ মেমরি কমপক্ষে 1824MB হতে হবে যদি নিম্নলিখিত ঘনত্বগুলির মধ্যে যেকোনটি ব্যবহার করা হয়:

    • ছোট/স্বাভাবিক স্ক্রিনে 560dpi বা উচ্চতর
    • বড় পর্দায় 400dpi বা উচ্চতর
    • অতিরিক্ত বড় স্ক্রিনে xhdpi বা উচ্চতর

উল্লেখ্য যে উপরের "কার্নেল এবং ব্যবহারকারীর স্থানের জন্য উপলব্ধ মেমরি" রেডিও, ভিডিও ইত্যাদির মতো হার্ডওয়্যার উপাদানগুলির জন্য নিবেদিত যে কোনও মেমরি ছাড়াও প্রদত্ত মেমরি স্পেসকে বোঝায় যা ডিভাইস বাস্তবায়নে কার্নেলের নিয়ন্ত্রণে নেই।

স্বয়ংচালিত ডিভাইস বাস্তবায়ন:

  • [ 7.7 .1/A] পেরিফেরাল মোড সমর্থনকারী একটি USB পোর্ট অন্তর্ভুক্ত করা উচিত।

স্বয়ংচালিত ডিভাইস বাস্তবায়ন:

  • [ 7.8 .1/A-0-1] একটি মাইক্রোফোন অন্তর্ভুক্ত করা আবশ্যক।

স্বয়ংচালিত ডিভাইস বাস্তবায়ন:

  • [ 7.8 .2/A-0-1] একটি অডিও আউটপুট থাকতে হবে এবং android.hardware.audio.output ঘোষণা করতে হবে।

2.5.2। মাল্টিমিডিয়া

স্বয়ংচালিত ডিভাইস বাস্তবায়ন অবশ্যই নিম্নলিখিত অডিও এনকোডিং এবং ডিকোডিং ফর্ম্যাটগুলিকে সমর্থন করবে এবং সেগুলিকে তৃতীয় পক্ষের অ্যাপ্লিকেশনগুলিতে উপলব্ধ করতে হবে:

  • [ 5.1 /A-0-1] MPEG-4 AAC প্রোফাইল (AAC LC)
  • [ 5.1 /A-0-2] MPEG-4 HE AAC প্রোফাইল (AAC+)
  • [ 5.1 /A-0-3] AAC ELD (বর্ধিত কম বিলম্ব AAC)

স্বয়ংচালিত ডিভাইস বাস্তবায়ন নিম্নলিখিত ভিডিও এনকোডিং ফর্ম্যাটগুলিকে সমর্থন করে এবং তৃতীয় পক্ষের অ্যাপ্লিকেশনগুলিতে তাদের উপলব্ধ করা আবশ্যক:

  • [ 5.2 /A-0-1] H.264 AVC
  • [ 5.2 /A-0-2] VP8

স্বয়ংচালিত ডিভাইস বাস্তবায়ন অবশ্যই নিম্নলিখিত ভিডিও ডিকোডিং ফর্ম্যাটগুলিকে সমর্থন করবে এবং সেগুলিকে তৃতীয় পক্ষের অ্যাপ্লিকেশনগুলিতে উপলব্ধ করতে হবে:

  • [ 5.3 /A-0-1] H.264 AVC
  • [ 5.3 /A-0-2] MPEG-4 SP
  • [ 5.3 /A-0-3] VP8
  • [ 5.3 /A-0-4] VP9

নিম্নলিখিত ভিডিও ডিকোডিং সমর্থন করার জন্য স্বয়ংচালিত ডিভাইস বাস্তবায়ন দৃঢ়ভাবে সুপারিশ করা হয়:

  • [ 5.3 /A-SR] H.265 HEVC

2.5.3। সফটওয়্যার

স্বয়ংচালিত ডিভাইস বাস্তবায়ন:

  • [ 3 /A-0-1] অবশ্যই android.hardware.type.automotive বৈশিষ্ট্যটি ঘোষণা করতে হবে।

  • [ 3 /A-0-2] uiMode = UI_MODE_TYPE_CAR সমর্থন করতে হবে।

  • [ 3 /A-0-3] android.car.* নামস্থানে সমস্ত পাবলিক API সমর্থন করতে হবে।

যদি স্বয়ংচালিত ডিভাইস বাস্তবায়ন android.car.CarPropertyManager ব্যবহার করে android.car.VehiclePropertyIds ব্যবহার করে একটি মালিকানাধীন API প্রদান করে, তারা:

  • [ 3 /A-1-1] সিস্টেম অ্যাপ্লিকেশনের এই বৈশিষ্ট্যগুলির ব্যবহারে বিশেষ সুযোগ-সুবিধা সংযুক্ত করা উচিত নয় বা তৃতীয় পক্ষের অ্যাপ্লিকেশনগুলিকে এই বৈশিষ্ট্যগুলি ব্যবহার করা থেকে বিরত রাখা উচিত নয়৷
  • [ 3 /A-1-2] SDK- এ আগে থেকেই বিদ্যমান গাড়ির সম্পত্তির প্রতিলিপি করা উচিত নয়৷

স্বয়ংচালিত ডিভাইস বাস্তবায়ন:

  • [ 3.2 .1/A-0-1] স্বয়ংচালিত অনুমতি রেফারেন্স পৃষ্ঠা দ্বারা নথিভুক্ত সমস্ত অনুমতি স্থিরকে সমর্থন ও প্রয়োগ করতে হবে।

  • [ 3.2.3.1 /A-0-1] এখানে তালিকাভুক্ত নিম্নলিখিত অ্যাপ্লিকেশন ইন্টেন্ট দ্বারা সংজ্ঞায়িত সমস্ত পাবলিক ইনটেন্ট ফিল্টার প্যাটার্নগুলির জন্য একটি অভিপ্রায় হ্যান্ডলারের সাথে এক বা একাধিক অ্যাপ্লিকেশন বা পরিষেবা উপাদানগুলিকে প্রিলোড করতে হবে৷

  • [ 3.4 .1/A-0-1] অবশ্যই android.webkit.Webview API-এর সম্পূর্ণ বাস্তবায়ন প্রদান করতে হবে।

  • [ 3.8 .3/A-0-1] থার্ড-পার্টি অ্যাপ্লিকেশানগুলির দ্বারা অনুরোধ করা হলে বিজ্ঞপ্তিগুলি প্রদর্শন করতে হবে যা Notification.CarExtender API ব্যবহার করে৷

  • [ 3.8 .4/A-SR] অ্যাসিস্ট অ্যাকশন পরিচালনা করতে ডিভাইসে একজন সহকারীকে প্রয়োগ করার জন্য দৃঢ়ভাবে সুপারিশ করা হয়।

যদি স্বয়ংচালিত ডিভাইস বাস্তবায়নে একটি পুশ-টু-টক বোতাম অন্তর্ভুক্ত থাকে, তারা:

  • [ 3.8 .4/A-1-1] ব্যবহারকারী-নির্বাচিত সহায়তা অ্যাপ চালু করার জন্য নির্ধারিত ইন্টারঅ্যাকশন হিসাবে পুশ-টু-টক বোতামের একটি ছোট প্রেস ব্যবহার করতে হবে, অন্য কথায় যে অ্যাপটি VoiceInteractionService প্রয়োগ করে।

স্বয়ংচালিত ডিভাইস বাস্তবায়ন:

  • [ 3.8.3.1 /A-0-1] Notifications on Automotive OS বর্ণিত হিসাবে অবশ্যই সঠিকভাবে সংস্থানগুলি রেন্ডার করতে হবে৷
  • [ 3.8.3.1 /A-0-2] Notification.Builder.addAction() এর মাধ্যমে প্রদত্ত নোটিফিকেশন অ্যাকশনের জায়গায় প্লে এবং মিউট প্রদর্শন করতে হবে
  • [ 3.8.3.1 /A] প্রতি-বিজ্ঞপ্তি-চ্যানেল নিয়ন্ত্রণের মতো সমৃদ্ধ ব্যবস্থাপনার কাজগুলিকে সীমাবদ্ধ করা উচিত। নিয়ন্ত্রণ কমাতে অ্যাপ্লিকেশন প্রতি UI সামর্থ্য ব্যবহার করতে পারে।

স্বয়ংচালিত ডিভাইস বাস্তবায়ন:

  • [ 3.14 /A-0-1] বিভাগ 3.14 এ বর্ণিত মিডিয়া API ব্যবহার করে তৃতীয় পক্ষের অ্যাপগুলিকে সমর্থন করার জন্য অবশ্যই একটি UI ফ্রেমওয়ার্ক অন্তর্ভুক্ত করতে হবে৷
  • [ 3.14 /A-0-2] ড্রাইভিং করার সময় ব্যবহারকারীকে নিরাপদে মিডিয়া অ্যাপ্লিকেশনগুলির সাথে যোগাযোগ করার অনুমতি দিতে হবে।
  • [ 3.14 /A-0-3] CAR_INTENT_ACTION_MEDIA_TEMPLATE অন্তর্নিহিত ইন্টেন্ট অ্যাকশনকে CAR_EXTRA_MEDIA_PACKAGE অতিরিক্ত সহ সমর্থন করতে হবে।
  • [ 3.14 /A-0-4] একটি মিডিয়া অ্যাপ্লিকেশনের পছন্দের কার্যকলাপে নেভিগেট করার জন্য অবশ্যই একটি সামর্থ্য প্রদান করতে হবে, তবে এটি শুধুমাত্র তখনই সক্ষম হবে যখন কার UX বিধিনিষেধ কার্যকর না হয়৷
  • [ 3.14 /A-0-5] মিডিয়া অ্যাপ্লিকেশন দ্বারা সেট করা ত্রুটি বার্তা অবশ্যই প্রদর্শন করতে হবে, এবং ঐচ্ছিক অতিরিক্ত ERROR_RESOLUTION_ACTION_LABEL এবং ERROR_RESOLUTION_ACTION_INTENT সমর্থন করতে হবে।
  • [ 3.14 /A-0-6] সার্চ সমর্থন করে এমন অ্যাপগুলির জন্য একটি ইন-অ্যাপ সার্চ সামর্থ্য সমর্থন করতে হবে।
  • [ 3.14 /A-0-7] MediaBrowser শ্রেণিবিন্যাস প্রদর্শন করার সময় অবশ্যই CONTENT_STYLE_BROWSABLE_HINT এবং CONTENT_STYLE_PLAYABLE_HINT সংজ্ঞাগুলিকে সম্মান করতে হবে৷

যদি স্বয়ংচালিত ডিভাইস বাস্তবায়নে একটি ডিফল্ট লঞ্চার অ্যাপ অন্তর্ভুক্ত থাকে, তারা:

  • [ 3.14 /A-1-1] মিডিয়া পরিষেবাগুলি অবশ্যই অন্তর্ভুক্ত করতে হবে এবং সেগুলিকে CAR_INTENT_ACTION_MEDIA_TEMPLATE অভিপ্রায়ে খুলতে হবে৷

স্বয়ংচালিত ডিভাইস বাস্তবায়ন:

  • [ 3.8 /A] immersive documentation বর্ণিত একটি পূর্ণ স্ক্রীন মোডে প্রবেশের আবেদনের অনুরোধগুলিকে সীমাবদ্ধ করতে পারে৷
  • [ 3.8 /A] স্ট্যাটাস বার এবং নেভিগেশন বার সর্বদা দৃশ্যমান রাখতে পারে।
  • [ 3.8 /A] সিস্টেম UI উপাদানগুলির পিছনের রঙগুলি পরিবর্তন করার জন্য অ্যাপ্লিকেশন অনুরোধগুলিকে সীমাবদ্ধ করতে পারে, যাতে এই উপাদানগুলি সর্বদা স্পষ্টভাবে দৃশ্যমান হয়।

2.5.4। কর্মক্ষমতা এবং ক্ষমতা

স্বয়ংচালিত ডিভাইস বাস্তবায়ন:

  • [ 8.2 /A-0-1] প্রতিটি প্রক্রিয়ার UID প্রতি অ-উদ্বায়ী সঞ্চয়স্থানে পঠিত এবং লিখিত বাইটের সংখ্যা অবশ্যই রিপোর্ট করতে হবে যাতে সিস্টেম API android.car.storagemonitoring.CarStorageMonitoringManager এর মাধ্যমে পরিসংখ্যান বিকাশকারীদের কাছে উপলব্ধ হয়। অ্যান্ড্রয়েড ওপেন সোর্স প্রকল্প uid_sys_stats কার্নেল মডিউলের মাধ্যমে প্রয়োজনীয়তা পূরণ করে।
  • [ 8.3 /A-1-3] গ্যারেজ মোড সমর্থন করতে হবে।
  • [ 8.3 /A] প্রতিটি ড্রাইভের পরে কমপক্ষে 15 মিনিটের জন্য গ্যারেজ মোডে থাকা উচিত যদি না:
    • ব্যাটারি শেষ হয়ে গেছে।
    • কোন নিষ্ক্রিয় কাজ নির্ধারিত হয়.
    • ড্রাইভার গ্যারেজ মোড থেকে প্রস্থান করে।
  • [ 8.4 /A-0-1] একটি প্রতি-কম্পোনেন্ট পাওয়ার প্রোফাইল প্রদান করতে হবে যা প্রতিটি হার্ডওয়্যার কম্পোনেন্টের বর্তমান খরচের মান এবং সময়ের সাথে সাথে উপাদানগুলির দ্বারা সৃষ্ট আনুমানিক ব্যাটারি ড্রেনকে সংজ্ঞায়িত করে যেমনটি Android ওপেন সোর্স প্রকল্প সাইটে নথিভুক্ত করা হয়েছে।
  • [ 8.4 /A-0-2] মিলিঅ্যাম্পিয়ার আওয়ারে (mAh) সমস্ত পাওয়ার খরচের মান রিপোর্ট করতে হবে।
  • [ 8.4 /A-0-3] প্রতিটি প্রক্রিয়ার UID প্রতি CPU পাওয়ার খরচ রিপোর্ট করতে হবে। অ্যান্ড্রয়েড ওপেন সোর্স প্রকল্প uid_cputime কার্নেল মডিউল বাস্তবায়নের মাধ্যমে প্রয়োজনীয়তা পূরণ করে।
  • [ 8.4 /A] একটি অ্যাপ্লিকেশনে হার্ডওয়্যার উপাদান শক্তি ব্যবহার বৈশিষ্ট্যযুক্ত করতে অক্ষম হলে হার্ডওয়্যার উপাদান নিজেই দায়ী করা উচিত.
  • [ 8.4 /A-0-4] অ্যাপ ডেভেলপারকে adb shell dumpsys batterystats শেল কমান্ডের মাধ্যমে এই পাওয়ার ব্যবহার উপলব্ধ করা আবশ্যক।

2.5.5। নিরাপত্তা মডেল

যদি স্বয়ংচালিত ডিভাইস বাস্তবায়ন একাধিক ব্যবহারকারীকে সমর্থন করে, তারা:

স্বয়ংচালিত ডিভাইস বাস্তবায়ন:

  • [ 9.11 /A-0-1] একটি বিচ্ছিন্ন এক্সিকিউশন এনভায়রনমেন্টের সাথে কীস্টোর বাস্তবায়নের ব্যাক আপ নিতে হবে।
  • [ 9.11 /A-0-2] নিরাপদে বিচ্ছিন্ন একটি এলাকায় Android কীস্টোর সিস্টেমের সমর্থিত অ্যালগরিদমগুলিকে সঠিকভাবে সমর্থন করার জন্য RSA, AES, ECDSA এবং HMAC ক্রিপ্টোগ্রাফিক অ্যালগরিদম এবং MD5, SHA1, এবং SHA-2 ফ্যামিলি হ্যাশ ফাংশনগুলির বাস্তবায়ন থাকতে হবে কার্নেল এবং উপরে চলমান কোড থেকে। সুরক্ষিত বিচ্ছিন্নতা অবশ্যই সমস্ত সম্ভাব্য প্রক্রিয়াকে অবরুদ্ধ করতে হবে যার দ্বারা কার্নেল বা ইউজারস্পেস কোড ডিএমএ সহ বিচ্ছিন্ন পরিবেশের অভ্যন্তরীণ অবস্থা অ্যাক্সেস করতে পারে। আপস্ট্রিম অ্যান্ড্রয়েড ওপেন সোর্স প্রজেক্ট (AOSP) ট্রাস্টি বাস্তবায়ন ব্যবহার করে এই প্রয়োজনীয়তা পূরণ করে, কিন্তু অন্য একটি ARM TrustZone-ভিত্তিক সমাধান বা একটি সঠিক হাইপারভাইজার-ভিত্তিক বিচ্ছিন্নতার একটি তৃতীয় পক্ষের পর্যালোচনা করা নিরাপদ বাস্তবায়ন হল বিকল্প বিকল্প।
  • [ 9.11 /A-0-3] বিচ্ছিন্ন এক্সিকিউশন পরিবেশে অবশ্যই লক স্ক্রিন প্রমাণীকরণ করতে হবে এবং শুধুমাত্র সফল হলেই প্রমাণীকরণ-বাউন্ড কীগুলি ব্যবহার করার অনুমতি দিন৷ লক স্ক্রিন শংসাপত্রগুলি অবশ্যই এমনভাবে সংরক্ষণ করা উচিত যা শুধুমাত্র বিচ্ছিন্ন এক্সিকিউশন পরিবেশকে লক স্ক্রিন প্রমাণীকরণ করতে দেয়৷ আপস্ট্রিম অ্যান্ড্রয়েড ওপেন সোর্স প্রজেক্ট গেটকিপার হার্ডওয়্যার অ্যাবস্ট্রাকশন লেয়ার (HAL) এবং ট্রাস্টি প্রদান করে, যা এই প্রয়োজনীয়তা মেটাতে ব্যবহার করা যেতে পারে।
  • [ 9.11 /A-0-4] মূল প্রত্যয়নকে সমর্থন করতে হবে যেখানে সত্যায়ন স্বাক্ষর কী সুরক্ষিত হার্ডওয়্যার দ্বারা সুরক্ষিত থাকে এবং নিরাপদ হার্ডওয়্যারে স্বাক্ষর করা হয়। প্রত্যয়ন স্বাক্ষরকারী কীগুলিকে ডিভাইস শনাক্তকারী হিসাবে ব্যবহার করা থেকে আটকাতে যথেষ্ট সংখ্যক ডিভাইস জুড়ে শেয়ার করা আবশ্যক৷ এই প্রয়োজনীয়তা পূরণের একটি উপায় হল একই প্রত্যয়ন কী শেয়ার করা যদি না একটি প্রদত্ত SKU-এর কমপক্ষে 100,000 ইউনিট তৈরি করা হয়। যদি একটি SKU-এর 100,000 ইউনিটের বেশি উত্পাদিত হয়, তাহলে প্রতিটি 100,000 ইউনিটের জন্য একটি ভিন্ন কী ব্যবহার করা যেতে পারে।

মনে রাখবেন যে যদি একটি ডিভাইস বাস্তবায়ন ইতিমধ্যেই একটি পূর্ববর্তী অ্যান্ড্রয়েড সংস্করণে চালু করা হয়, তাহলে এই ধরনের ডিভাইসটিকে একটি বিচ্ছিন্ন এক্সিকিউশন এনভায়রনমেন্ট দ্বারা সমর্থিত একটি কীস্টোর থাকা এবং কী প্রত্যয়ন সমর্থন করার প্রয়োজনীয়তা থেকে অব্যাহতি দেওয়া হয়, যদি না এটি android.hardware.fingerprint বৈশিষ্ট্যটি ঘোষণা করে যা একটি বিচ্ছিন্ন এক্সিকিউশন পরিবেশ দ্বারা সমর্থিত একটি কীস্টোর প্রয়োজন।

স্বয়ংচালিত ডিভাইস বাস্তবায়ন:

  • [ 9.14 /A-0-1] অ্যান্ড্রয়েড ফ্রেমওয়ার্ক গাড়ির সাবসিস্টেমের গেটকিপ মেসেজ, যেমন, অনুমোদিত বার্তার ধরন এবং বার্তার উত্সগুলিকে একটি অনুমোদিত তালিকায় যোগ করা আবশ্যক।
  • [ 9.14 /A-0-2] অ্যান্ড্রয়েড ফ্রেমওয়ার্ক বা থার্ড-পার্টি অ্যাপস থেকে পরিষেবা আক্রমণ অস্বীকারের বিরুদ্ধে নজরদারি করা আবশ্যক। এটি ক্ষতিকারক সফ্টওয়্যার থেকে রক্ষা করে যা যানবাহনের নেটওয়ার্ককে ট্র্যাফিকের সাথে প্লাবিত করে, যা গাড়ির সাবসিস্টেমের ত্রুটির কারণ হতে পারে।

2.5.6। বিকাশকারী সরঞ্জাম এবং বিকল্প সামঞ্জস্য

স্বয়ংচালিত ডিভাইস বাস্তবায়ন:

2.6। ট্যাবলেট প্রয়োজনীয়তা

একটি অ্যান্ড্রয়েড ট্যাবলেট ডিভাইস একটি অ্যান্ড্রয়েড ডিভাইস বাস্তবায়নকে বোঝায় যা সাধারণত নিম্নলিখিত সমস্ত মানদণ্ড পূরণ করে:

  • উভয় হাতে ধরে ব্যবহৃত।
  • একটি ক্ল্যামশেল বা রূপান্তরযোগ্য কনফিগারেশন নেই।
  • একটি স্ট্যান্ডার্ড সংযোগ (যেমন ইউএসবি, ব্লুটুথ) এর মাধ্যমে ডিভাইস সংযোগের সাথে ব্যবহৃত শারীরিক কীবোর্ড বাস্তবায়ন।
  • একটি পাওয়ার উত্স রয়েছে যা গতিশীলতা সরবরাহ করে, যেমন ব্যাটারি।
  • 7 থেকে 18 ইঞ্চি পরিসরে একটি শারীরিক তির্যক পর্দার আকার রয়েছে।

ট্যাবলেট ডিভাইস বাস্তবায়নের হ্যান্ডহেল্ড ডিভাইস বাস্তবায়নের অনুরূপ প্রয়োজনীয়তা রয়েছে। ব্যতিক্রমগুলি সেই বিভাগে একটি * দ্বারা নির্দেশিত এবং এই বিভাগে রেফারেন্সের জন্য উল্লেখ করা হয়েছে।

2.6.1। হার্ডওয়্যার

পর্দার আকার

  • [ 7.1 .1.1/Tab-0-1] 7 থেকে 18 ইঞ্চি রেঞ্জের মধ্যে একটি স্ক্রিন থাকা আবশ্যক৷

জাইরোস্কোপ

যদি ট্যাবলেট ডিভাইস বাস্তবায়নে একটি 3-অক্ষ জাইরোস্কোপ অন্তর্ভুক্ত থাকে তবে তারা:

  • [ 7.3 .4/ট্যাব -1-1] অবশ্যই প্রতি সেকেন্ডে 1000 ডিগ্রি পর্যন্ত ওরিয়েন্টেশন পরিবর্তন করতে সক্ষম হতে হবে।

ন্যূনতম মেমরি এবং স্টোরেজ (বিভাগ 7.6.1)

হ্যান্ডহেল্ড প্রয়োজনীয়তাগুলিতে ছোট/স্বাভাবিক স্ক্রিনের জন্য তালিকাভুক্ত পর্দার ঘনত্ব ট্যাবলেটগুলির জন্য প্রযোজ্য নয়।

USB পেরিফেরাল মোড (বিভাগ 7.7.1)

যদি ট্যাবলেট ডিভাইস বাস্তবায়নে পেরিফেরাল মোড সমর্থনকারী একটি USB পোর্ট অন্তর্ভুক্ত থাকে, তারা:

  • [ 7.7.১ /ট্যাব] অ্যান্ড্রয়েড ওপেন অ্যাকসেসরিজ (এওএ) এপিআই প্রয়োগ করতে পারে।

ভার্চুয়াল রিয়েলিটি মোড (বিভাগ 7.9.1)

ভার্চুয়াল রিয়েলিটি হাই পারফরম্যান্স (বিভাগ 7.9.2)

ভার্চুয়াল বাস্তবতা প্রয়োজনীয়তা ট্যাবলেট প্রযোজ্য নয়.

2.6.2। নিরাপত্তা মডেল

কী এবং শংসাপত্রগুলি (বিভাগ 9.11)

বিভাগ [ 9.11 ] দেখুন।

যদি ট্যাবলেট ডিভাইস বাস্তবায়নে একাধিক ব্যবহারকারী অন্তর্ভুক্ত থাকে এবং android.hardware.telephony বৈশিষ্ট্য পতাকা ঘোষণা না করে তবে তারা:

  • [ 9.5 /টি -1-1] অবশ্যই সীমাবদ্ধ প্রোফাইলগুলি সমর্থন করতে হবে, এমন একটি বৈশিষ্ট্য যা ডিভাইসের মালিকদের ডিভাইসে অতিরিক্ত ব্যবহারকারী এবং তাদের ক্ষমতা পরিচালনা করতে দেয়। সীমাবদ্ধ প্রোফাইলগুলির সাথে, ডিভাইসের মালিকরা অতিরিক্ত ব্যবহারকারীদের জন্য কাজ করার জন্য দ্রুত আলাদা পরিবেশ সেট আপ করতে পারে, সেই পরিবেশে উপলব্ধ অ্যাপগুলিতে সূক্ষ্ম সীমাবদ্ধতা পরিচালনা করার ক্ষমতা সহ।

যদি ট্যাবলেট ডিভাইস বাস্তবায়নে একাধিক ব্যবহারকারী অন্তর্ভুক্ত থাকে এবং android.hardware.telephony বৈশিষ্ট্য পতাকা ঘোষণা করুন, তারা:

  • [ 9.5 /টি -2-1] অবশ্যই সীমাবদ্ধ প্রোফাইলগুলি সমর্থন করবে না তবে অন্য ব্যবহারকারীদের ভয়েস কল এবং এসএমএস অ্যাক্সেস করতে সক্ষম /অক্ষম করতে নিয়ন্ত্রণগুলির এওএসপি বাস্তবায়নের সাথে সামঞ্জস্য করতে হবে।

2.6.2। সফটওয়্যার

  • [ ৩.২.৩.১ /ট্যাব -০-১] এখানে তালিকাভুক্ত নিম্নলিখিত অ্যাপ্লিকেশনটির উদ্দেশ্যগুলি দ্বারা সংজ্ঞায়িত সমস্ত পাবলিক ইনটেন্ট ফিল্টার নিদর্শনগুলির জন্য একটি অভিপ্রায় হ্যান্ডলার সহ এক বা একাধিক অ্যাপ্লিকেশন বা পরিষেবা উপাদানগুলি প্রিলোড করতে হবে।

3. সফটওয়্যার

3.1। পরিচালিত API সামঞ্জস্য

পরিচালিত ডালভিক বাইটকোড এক্সিকিউশন এনভায়রনমেন্ট হল অ্যান্ড্রয়েড অ্যাপ্লিকেশনের জন্য প্রাথমিক বাহন। অ্যান্ড্রয়েড অ্যাপ্লিকেশন প্রোগ্রামিং ইন্টারফেস (API) হল অ্যান্ড্রয়েড প্ল্যাটফর্ম ইন্টারফেসের একটি সেট যা পরিচালিত রানটাইম পরিবেশে চলমান অ্যাপ্লিকেশনগুলির জন্য উন্মুক্ত।

ডিভাইস বাস্তবায়ন:

  • [সি -0-1] অ্যান্ড্রয়েড এসডিকে দ্বারা উন্মুক্ত যে কোনও ডকুমেন্টেড এপিআই বা উজানের অ্যান্ড্রয়েড উত্স কোডে "@সিস্টেমাপি" চিহ্নিতকারী দ্বারা সজ্জিত যে কোনও এপিআই দ্বারা প্রকাশিত কোনও ডকুমেন্টেড এপিআইয়ের সমস্ত নথিভুক্ত আচরণ সহ সম্পূর্ণ বাস্তবায়ন সরবরাহ করতে হবে।

  • [সি -0-2] টেস্টাপি টীকা (@টেস্টাপি) দ্বারা চিহ্নিত সমস্ত শ্রেণি, পদ্ধতি এবং সম্পর্কিত উপাদানগুলিকে সমর্থন/সংরক্ষণ করতে হবে।

  • [সি -0-3] অবশ্যই কোনও পরিচালিত এপিআই বাদ দেওয়া উচিত নয়, এপিআই ইন্টারফেস বা স্বাক্ষরগুলি পরিবর্তন করতে হবে না, ডকুমেন্টেড আচরণ থেকে বিচ্যুত হওয়া, বা এনও-আপ অন্তর্ভুক্ত করা উচিত নয়, যেখানে এই সামঞ্জস্যতা সংজ্ঞা দ্বারা নির্দিষ্টভাবে অনুমোদিত।

  • [সি -0-4] এখনও এপিআইগুলিকে উপস্থিত রাখতে হবে এবং যুক্তিসঙ্গত উপায়ে আচরণ করতে হবে, এমনকি যখন কিছু হার্ডওয়্যার বৈশিষ্ট্য যার জন্য অ্যান্ড্রয়েডের অন্তর্ভুক্ত এপিআই বাদ দেওয়া হয়। এই দৃশ্যের জন্য নির্দিষ্ট প্রয়োজনীয়তার জন্য বিভাগ 7 দেখুন।

  • [সি -0-5] অবশ্যই তৃতীয় পক্ষের অ্যাপ্লিকেশনগুলিকে নন-এসডিকে ইন্টারফেসগুলি ব্যবহার করার অনুমতি দেবে না, যা এওএসপি-তে বুট ক্লাসপথে থাকা জাভা ভাষা প্যাকেজগুলিতে পদ্ধতি এবং ক্ষেত্র হিসাবে সংজ্ঞায়িত করা হয় এবং এটি অংশ হিসাবে তৈরি হয় না পাবলিক এসডিকে। এর মধ্যে এসডিকে নথি এবং বেসরকারী এবং প্যাকেজ-বেসরকারী শ্রেণির সদস্যদের বর্ণিত হিসাবে @hide টীকা দিয়ে সজ্জিত এপিআই অন্তর্ভুক্ত রয়েছে তবে কোনও @SystemAPI সাথে নয়।

  • [সি -0-6] অবশ্যই prebuilts/runtime/appcompat/hiddenapi-flags.csv পাথের জন্য যথাযথ এপিআই স্তর শাখার জন্য প্রদত্ত এবং ডেনাইলিস্ট পতাকাগুলির মাধ্যমে প্রদত্ত একই সীমাবদ্ধ তালিকায় প্রতিটি নন-এসডিকে ইন্টারফেসের সাথে প্রেরণ করতে হবে এওএসপি।

  • [সি -0-7] এওএসপি-তে উপস্থিত বিদ্যমান পাবলিক কীগুলি ব্যবহার করে কোনও এপিকে স্বাক্ষরিত কনফিগারেশন এম্বেড করে একটি সীমাবদ্ধ তালিকা থেকে নন-এসডিকে ইন্টারফেসগুলি অপসারণ করতে স্বাক্ষরিত কনফিগারেশন ডায়নামিক আপডেট প্রক্রিয়াটিকে সমর্থন করতে হবে।

    তবে তারা:

    • যদি কোনও লুকানো এপিআই ডিভাইস বাস্তবায়নে অনুপস্থিত বা অন্যভাবে প্রয়োগ করা হয় তবে লুকানো এপিআইকে ডেনাইলিস্টে স্থানান্তরিত করুন বা সমস্ত সীমাবদ্ধ তালিকাগুলি (যেমন হালকা-ধূসর, গা dark ়-ধূসর, কালো) থেকে বাদ দিন।
    • যদি এওএসপি-তে ইতিমধ্যে কোনও লুকানো এপিআই বিদ্যমান না থাকে তবে কোনও সীমাবদ্ধ তালিকায় লুকানো এপিআই যুক্ত করুন (যেমন হালকা-ধূসর, গা dark ়-ধূসর, কালো)।

3.1.1। অ্যান্ড্রয়েড এক্সটেনশন

অ্যান্ড্রয়েড সেই এপিআই স্তরের জন্য এক্সটেনশন সংস্করণ আপডেট করে একটি নির্দিষ্ট এপিআই স্তরের পরিচালিত এপিআই পৃষ্ঠকে প্রসারিত করে সমর্থন করে। android.os.ext.SdkExtensions.getExtensionVersion(int apiLevel) এপিআই সরবরাহিত apiLevel এক্সটেনশন সংস্করণটি ফেরত দেয়, যদি সেই এপিআই স্তরের জন্য এক্সটেনশন থাকে।

অ্যান্ড্রয়েড ডিভাইস বাস্তবায়ন:

  • [সি -0-1] প্রতিটি এপিআই স্তর অনুযায়ী অনুমোদিত ন্যূনতম সংস্করণগুলির চেয়েও বেশি বা সমান সংস্করণ সহ ভাগ করা লাইব্রেরি ExtShared এবং পরিষেবাদি ExtServices উভয়ের এওএসপি বাস্তবায়নের প্রিলোড করতে হবে। উদাহরণস্বরূপ, অ্যান্ড্রয়েড 7.0 ডিভাইস বাস্তবায়ন, চলমান API স্তর 24 তে কমপক্ষে সংস্করণ 1 অন্তর্ভুক্ত থাকতে হবে।

  • [সি -0-2] কেবলমাত্র এওএসপি দ্বারা সংজ্ঞায়িত করা বৈধ এক্সটেনশন সংস্করণ নম্বরটি অবশ্যই ফেরত দিতে হবে।

  • [সি -0-3 ] অবশ্যই android.os.ext.SdkExtensions.getExtensionVersion(int apiLevel) দ্বারা প্রত্যাবর্তিত এক্সটেনশন সংস্করণগুলির দ্বারা সংজ্ঞায়িত সমস্ত এপিআইকে সমর্থন করতে হবে।

3.1.2। অ্যান্ড্রয়েড লাইব্রেরি

অ্যাপাচি এইচটিটিপি ক্লায়েন্টের অবমূল্যায়নের কারণে, ডিভাইস বাস্তবায়ন:

  • [সি -0-1] অবশ্যই org.apache.http.legacy লাইব্রেরি বুটক্লাসপথে রাখা উচিত নয়।
  • [সি -0-2] অবশ্যই অ্যাপ্লিকেশন ক্লাসপথে org.apache.http.legacy লাইব্রেরি যুক্ত করতে হবে যখন অ্যাপটি নিম্নলিখিত শর্তগুলির মধ্যে একটি সন্তুষ্ট করে:
    • এপিআই স্তর 28 বা তার চেয়ে কম লক্ষ্য করে।
    • এর ম্যানিফেস্টে ঘোষণা করে যে এটি android:name org.apache.http.legacy<uses-library> এর নাম বৈশিষ্ট্য।

এওএসপি বাস্তবায়ন এই প্রয়োজনীয়তাগুলি পূরণ করে।

3.2। সফট এপিআই সামঞ্জস্য

বিভাগ 3.1 থেকে পরিচালিত API গুলি ছাড়াও, Android-এ একটি উল্লেখযোগ্য রানটাইম-শুধুমাত্র "সফ্ট" API অন্তর্ভুক্ত রয়েছে, যেমন উদ্দেশ্য, অনুমতি এবং Android অ্যাপ্লিকেশনগুলির অনুরূপ দিকগুলির আকারে যা অ্যাপ্লিকেশন কম্পাইলের সময় প্রয়োগ করা যায় না৷

3.2.1। অনুমতি

  • [C-0-1] ডিভাইস বাস্তবায়নকারীদের অবশ্যই অনুমতির রেফারেন্স পৃষ্ঠা দ্বারা নথিভুক্ত সমস্ত অনুমতি ধ্রুবক সমর্থন এবং প্রয়োগ করতে হবে। মনে রাখবেন যে বিভাগ 9 এ অ্যান্ড্রয়েড নিরাপত্তা মডেল সম্পর্কিত অতিরিক্ত প্রয়োজনীয়তা তালিকাভুক্ত করা হয়েছে।

3.2.2। প্যারামিটার তৈরি করুন

অ্যান্ড্রয়েড এপিআইগুলি android.os.Build ক্লাসে অনেকগুলি ধ্রুবক অন্তর্ভুক্ত করে যা বর্তমান ডিভাইসটি বর্ণনা করার উদ্দেশ্যে।

  • [C-0-1] ডিভাইস বাস্তবায়ন জুড়ে সামঞ্জস্যপূর্ণ, অর্থপূর্ণ মান প্রদান করার জন্য, নীচের সারণীতে এই মানগুলির ফর্ম্যাটগুলির উপর অতিরিক্ত বিধিনিষেধ অন্তর্ভুক্ত করা হয়েছে যা ডিভাইস বাস্তবায়নগুলিকে মেনে চলতে হবে৷
প্যারামিটার বিস্তারিত
সংস্করণ। রিলিজ মানব-পাঠযোগ্য বিন্যাসে বর্তমানে কার্যকর করা Android সিস্টেমের সংস্করণ। এই ক্ষেত্রটিতে 11 টিতে সংজ্ঞায়িত স্ট্রিং মানগুলির মধ্যে একটি থাকতে হবে।
VERSION.SDK বর্তমানে কার্যকর করা Android সিস্টেমের সংস্করণ, তৃতীয় পক্ষের অ্যাপ্লিকেশন কোডে অ্যাক্সেসযোগ্য একটি বিন্যাসে। অ্যান্ড্রয়েড 11 এর জন্য, এই ক্ষেত্রটিতে অবশ্যই পূর্ণসংখ্যার মান 11_int থাকতে হবে।
VERSION.SDK_INT বর্তমানে কার্যকর করা Android সিস্টেমের সংস্করণ, তৃতীয় পক্ষের অ্যাপ্লিকেশন কোডে অ্যাক্সেসযোগ্য একটি বিন্যাসে। অ্যান্ড্রয়েড 11 এর জন্য, এই ক্ষেত্রটিতে অবশ্যই পূর্ণসংখ্যার মান 11_int থাকতে হবে।
সংস্করণ।বৃদ্ধিমূলক মানব-পঠনযোগ্য বিন্যাসে বর্তমানে কার্যকর করা Android সিস্টেমের নির্দিষ্ট বিল্ডকে মনোনীত করে ডিভাইস বাস্তবায়নকারী দ্বারা নির্বাচিত একটি মান। এই মানটি শেষ ব্যবহারকারীদের জন্য উপলব্ধ করা বিভিন্ন বিল্ডের জন্য পুনরায় ব্যবহার করা উচিত নয়। এই ক্ষেত্রের একটি সাধারণ ব্যবহার হল বিল্ড তৈরি করতে কোন বিল্ড নম্বর বা উৎস-নিয়ন্ত্রণ পরিবর্তন শনাক্তকারী ব্যবহার করা হয়েছে তা নির্দেশ করা। এই ক্ষেত্রের মানটি অবশ্যই মুদ্রণযোগ্য 7-বিট ASCII হিসাবে এনকোডেবল হতে হবে এবং নিয়মিত অভিব্যক্তি "^ [^: \/~]+$" এর সাথে মেলে।
বোর্ড মানব-পাঠযোগ্য বিন্যাসে ডিভাইস দ্বারা ব্যবহৃত নির্দিষ্ট অভ্যন্তরীণ হার্ডওয়্যার সনাক্ত করে ডিভাইস বাস্তবায়নকারী দ্বারা নির্বাচিত একটি মান। এই ক্ষেত্রের একটি সম্ভাব্য ব্যবহার হল ডিভাইসটিকে পাওয়ারিং বোর্ডের নির্দিষ্ট সংশোধন নির্দেশ করা। এই ক্ষেত্রের মান অবশ্যই 7-বিট ASCII হিসাবে এনকোডযোগ্য হতে হবে এবং রেগুলার এক্সপ্রেশন “^[a-zA-Z0-9_-]+$”-এর সাথে মেলে।
ব্র্যান্ড ডিভাইসের সাথে যুক্ত ব্র্যান্ড নামকে প্রতিফলিত করে একটি মান যা শেষ ব্যবহারকারীদের কাছে পরিচিত। মানব-পাঠযোগ্য বিন্যাসে হওয়া আবশ্যক এবং ডিভাইসটির প্রস্তুতকারক বা কোম্পানির ব্র্যান্ডের প্রতিনিধিত্ব করা উচিত যার অধীনে ডিভাইসটি বাজারজাত করা হয়। এই ক্ষেত্রের মান অবশ্যই 7-বিট ASCII হিসাবে এনকোডযোগ্য হতে হবে এবং রেগুলার এক্সপ্রেশন “^[a-zA-Z0-9_-]+$”-এর সাথে মেলে।
SUPPORTED_ABIS নেটিভ কোডের নির্দেশ সেটের নাম (CPU প্রকার + ABI কনভেনশন)। বিভাগ 3.3 দেখুন। নেটিভ API সামঞ্জস্য
SUPPORTED_32_BIT_ABIS নেটিভ কোডের নির্দেশ সেটের নাম (CPU প্রকার + ABI কনভেনশন)। বিভাগ 3.3 দেখুন। নেটিভ API সামঞ্জস্য
SUPPORTED_64_BIT_ABIS নেটিভ কোডের দ্বিতীয় নির্দেশ সেটের নাম (CPU প্রকার + ABI কনভেনশন)। বিভাগ 3.3 দেখুন। নেটিভ API সামঞ্জস্য
CPU_ABI নেটিভ কোডের নির্দেশ সেটের নাম (CPU প্রকার + ABI কনভেনশন)। বিভাগ 3.3 দেখুন। নেটিভ API সামঞ্জস্য
CPU_ABI2 নেটিভ কোডের দ্বিতীয় নির্দেশ সেটের নাম (CPU প্রকার + ABI কনভেনশন)। বিভাগ 3.3 দেখুন। নেটিভ API সামঞ্জস্য
যন্ত্র ডিভাইস বাস্তবায়নকারীর দ্বারা নির্বাচিত একটি মান যার মধ্যে ডেভেলপমেন্ট নাম বা কোড নাম থাকে যা ডিভাইসের হার্ডওয়্যার বৈশিষ্ট্য এবং শিল্প নকশার কনফিগারেশন সনাক্ত করে। এই ক্ষেত্রের মান অবশ্যই 7-বিট ASCII হিসাবে এনকোডযোগ্য হতে হবে এবং রেগুলার এক্সপ্রেশন “^[a-zA-Z0-9_-]+$”-এর সাথে মেলে। এই ডিভাইসের নামটি পণ্যের জীবদ্দশায় পরিবর্তন করা উচিত নয়।
আঙুলের ছাপ একটি স্ট্রিং যা এই বিল্ডটিকে অনন্যভাবে সনাক্ত করে। এটা যুক্তিসঙ্গতভাবে মানুষের পঠনযোগ্য হওয়া উচিত. এটি অবশ্যই এই টেমপ্লেটটি অনুসরণ করবে:

$(BRAND)/$(PRODUCT)/
$(ডিভাইস):$(সংস্করণ। রিলিজ)/$(আইডি)/$(সংস্করণ।ইনক্রিমেন্টাল):$(টাইপ)/$(ট্যাগস)

উদাহরণ স্বরূপ:

acme/myproduct/
মাইডিভাইস: 11/lmyxx/3359: ইউজারডিবাগ/পরীক্ষা-কী

ফিঙ্গারপ্রিন্টে হোয়াইটস্পেস অক্ষর অন্তর্ভুক্ত করা উচিত নয়। এই ক্ষেত্রের মান অবশ্যই 7-বিট ASCII হিসাবে এনকোডযোগ্য হতে হবে।

হার্ডওয়্যার হার্ডওয়্যারের নাম (কার্নেল কমান্ড লাইন বা /proc থেকে)। এটা যুক্তিসঙ্গতভাবে মানুষের পঠনযোগ্য হওয়া উচিত. এই ক্ষেত্রের মান অবশ্যই 7-বিট ASCII হিসাবে এনকোডযোগ্য হতে হবে এবং রেগুলার এক্সপ্রেশন “^[a-zA-Z0-9_-]+$”-এর সাথে মেলে।
হোস্ট একটি স্ট্রিং যা মানব-পাঠযোগ্য বিন্যাসে নির্মিত হোস্টটিকে অনন্যভাবে সনাক্ত করে। এই ক্ষেত্রের নির্দিষ্ট বিন্যাসে কোন প্রয়োজনীয়তা নেই, এটি শূন্য বা খালি স্ট্রিং ("") হওয়া উচিত নয়।
আইডি মানব-পাঠযোগ্য বিন্যাসে একটি নির্দিষ্ট রিলিজ উল্লেখ করার জন্য ডিভাইস বাস্তবায়নকারী দ্বারা নির্বাচিত একটি শনাক্তকারী। এই ক্ষেত্রটি android.os.Build.VERSION.INCREMENTAL এর মতোই হতে পারে, তবে সফ্টওয়্যার বিল্ডগুলির মধ্যে পার্থক্য করতে শেষ ব্যবহারকারীদের জন্য যথেষ্ট অর্থবহ একটি মান হওয়া উচিত৷ এই ক্ষেত্রের মান অবশ্যই 7-বিট ASCII হিসাবে এনকোডযোগ্য হতে হবে এবং রেগুলার এক্সপ্রেশন “^[a-zA-Z0-9._-]+$”-এর সাথে মেলে।
প্রস্তুতকারক পণ্যটির আসল সরঞ্জাম প্রস্তুতকারকের (OEM) ট্রেড নাম। এই ক্ষেত্রের নির্দিষ্ট বিন্যাসে কোন প্রয়োজনীয়তা নেই, এটি শূন্য বা খালি স্ট্রিং ("") হওয়া উচিত নয়। এই ক্ষেত্রটি পণ্যের জীবদ্দশায় পরিবর্তন করা উচিত নয়।
মডেল ডিভাইস বাস্তবায়নকারীর দ্বারা নির্বাচিত একটি মান যাতে ডিভাইসের নাম থাকে যা শেষ ব্যবহারকারীর কাছে পরিচিত। এটি একই নামে হওয়া উচিত যার অধীনে ডিভাইসটি বাজারজাত করা হয় এবং শেষ ব্যবহারকারীদের কাছে বিক্রি করা হয়। এই ক্ষেত্রের নির্দিষ্ট বিন্যাসে কোন প্রয়োজনীয়তা নেই, এটি শূন্য বা খালি স্ট্রিং ("") হওয়া উচিত নয়। এই ক্ষেত্রটি পণ্যের জীবদ্দশায় পরিবর্তন করা উচিত নয়।
পণ্য ডিভাইস বাস্তবায়নকারীর দ্বারা নির্বাচিত একটি মান যাতে নির্দিষ্ট পণ্যের (SKU) বিকাশের নাম বা কোড নাম থাকে যা একই ব্র্যান্ডের মধ্যে অনন্য হতে হবে। মানুষের পঠনযোগ্য হতে হবে, কিন্তু শেষ ব্যবহারকারীদের দেখার জন্য অগত্যা নয়। এই ক্ষেত্রের মান অবশ্যই 7-বিট ASCII হিসাবে এনকোডযোগ্য হতে হবে এবং রেগুলার এক্সপ্রেশন “^[a-zA-Z0-9_-]+$”-এর সাথে মেলে। এই পণ্যের নামটি পণ্যের জীবদ্দশায় পরিবর্তন করা উচিত নয়।
সিরিয়াল "অজানা" ফিরে আসতে হবে।
ট্যাগ ডিভাইস বাস্তবায়নকারী দ্বারা নির্বাচিত ট্যাগগুলির একটি কমা দ্বারা পৃথক করা তালিকা যা বিল্ডটিকে আরও আলাদা করে। ট্যাগগুলি অবশ্যই 7-বিট ASCII হিসাবে এনকোডেবল হতে হবে এবং নিয়মিত অভিব্যক্তি "^[এ-জেডএ-জেড 0-9 ._-]+" এর সাথে মেলে এবং তিনটি সাধারণ অ্যান্ড্রয়েড প্ল্যাটফর্ম স্বাক্ষর কনফিগারেশনগুলির সাথে সম্পর্কিত মানগুলির মধ্যে একটি অবশ্যই থাকতে হবে: রিলিজ- কী, দেব-কি এবং পরীক্ষা-কীগুলি।
টাইম বিল্ড কখন হয়েছিল তার টাইমস্ট্যাম্পের প্রতিনিধিত্বকারী একটি মান।
টাইপ বিল্ডের রানটাইম কনফিগারেশন নির্দিষ্ট করে ডিভাইস বাস্তবায়নকারীর দ্বারা নির্বাচিত একটি মান। এই ফিল্ডে অবশ্যই তিনটি সাধারণ অ্যান্ড্রয়েড রানটাইম কনফিগারেশনের সাথে সম্পর্কিত মানগুলির মধ্যে একটি থাকতে হবে: ব্যবহারকারী, ব্যবহারকারী ডিবাগ বা ইঞ্জি।
ব্যবহারকারী ব্যবহারকারীর (বা স্বয়ংক্রিয় ব্যবহারকারী) একটি নাম বা ব্যবহারকারী আইডি যা বিল্ড তৈরি করেছে। এই ক্ষেত্রের নির্দিষ্ট বিন্যাসে কোন প্রয়োজনীয়তা নেই, এটি শূন্য বা খালি স্ট্রিং ("") হওয়া উচিত নয়।
সংস্করণ.সিকিউরিটি_প্যাচ একটি মান একটি বিল্ডের নিরাপত্তা প্যাচ স্তর নির্দেশ করে৷ এটি অবশ্যই বোঝাতে হবে যে বিল্ডটি মনোনীত অ্যান্ড্রয়েড পাবলিক সিকিউরিটি বুলেটিনের মাধ্যমে বর্ণিত যেকোনও সমস্যার জন্য ঝুঁকিপূর্ণ নয়। এটি অবশ্যই [YYYY-MM-DD] ফর্ম্যাটে হতে হবে, Android পাবলিক সিকিউরিটি বুলেটিনে বা Android সিকিউরিটি অ্যাডভাইজরিতে নথিভুক্ত একটি সংজ্ঞায়িত স্ট্রিং এর সাথে মেলে, উদাহরণস্বরূপ "2015-11-01"৷
Version.base_os Android পাবলিক সিকিউরিটি বুলেটিনে প্রদত্ত প্যাচগুলি ব্যতীত বিল্ডের ফিঙ্গারপ্রিন্ট প্যারামিটারের প্রতিনিধিত্বকারী একটি মান যা এই বিল্ডের সাথে অন্যথায় অভিন্ন৷ এটি অবশ্যই সঠিক মান রিপোর্ট করতে হবে এবং যদি এই ধরনের বিল্ড বিদ্যমান না থাকে তবে একটি খালি স্ট্রিং ("") রিপোর্ট করুন।
বুটলোডার মানব-পাঠযোগ্য বিন্যাসে ডিভাইসে ব্যবহৃত নির্দিষ্ট অভ্যন্তরীণ বুটলোডার সংস্করণ সনাক্ত করে ডিভাইস বাস্তবায়নকারী দ্বারা নির্বাচিত একটি মান। এই ক্ষেত্রের মান অবশ্যই 7-বিট ASCII হিসাবে এনকোডযোগ্য হতে হবে এবং রেগুলার এক্সপ্রেশন “^[a-zA-Z0-9._-]+$”-এর সাথে মেলে।
getRadioVersion() মানব-পঠনযোগ্য বিন্যাসে ডিভাইসে ব্যবহৃত নির্দিষ্ট অভ্যন্তরীণ রেডিও/মডেম সংস্করণ সনাক্ত করে ডিভাইস বাস্তবায়নকারীর দ্বারা নির্বাচিত একটি মান অবশ্যই (হতে বা ফেরত দিতে হবে)। যদি কোনো ডিভাইসে কোনো অভ্যন্তরীণ রেডিও/মডেম না থাকে তাহলে সেটি অবশ্যই NULL ফেরত দিতে হবে। এই ক্ষেত্রের মান অবশ্যই 7-বিট ASCII হিসাবে এনকোডযোগ্য হতে হবে এবং রেগুলার এক্সপ্রেশন “^[a-zA-Z0-9._-,]+$”-এর সাথে মেলে।
getserial () একটি হার্ডওয়্যার সিরিয়াল নম্বর অবশ্যই (হতে বা ফিরিয়ে দেওয়া), যা একই মডেল এবং প্রস্তুতকারকের সাথে ডিভাইসগুলিতে অবশ্যই উপলব্ধ এবং অনন্য হতে হবে। এই ক্ষেত্রের মান অবশ্যই 7-বিট ASCII হিসাবে এনকোডযোগ্য হতে হবে এবং রেগুলার এক্সপ্রেশন “^[a-zA-Z0-9._-,]+$”-এর সাথে মেলে।

3.2.3। অভিপ্রায় সামঞ্জস্য

3.2.3.1। সাধারণ অ্যাপ্লিকেশন উদ্দেশ্য

অ্যান্ড্রয়েড ইন্টেন্টগুলি অ্যাপ্লিকেশন উপাদানগুলিকে অন্যান্য অ্যান্ড্রয়েড উপাদানগুলির থেকে কার্যকারিতার অনুরোধ করার অনুমতি দেয়৷ অ্যান্ড্রয়েড আপস্ট্রিম প্রকল্পে এমন অ্যাপ্লিকেশনগুলির একটি তালিকা অন্তর্ভুক্ত রয়েছে যা সাধারণ ক্রিয়া সম্পাদনের জন্য বেশ কয়েকটি অভিপ্রায় নিদর্শন প্রয়োগ করে।

ডিভাইস বাস্তবায়ন:

  • [সি-এসআর] এখানে তালিকাভুক্ত নিম্নলিখিত অ্যাপ্লিকেশন উদ্দেশ্যগুলি দ্বারা সংজ্ঞায়িত সমস্ত জনসাধারণের অভিপ্রায় ফিল্টার নিদর্শনগুলির জন্য একটি অভিপ্রায় হ্যান্ডলারের সাথে এক বা একাধিক অ্যাপ্লিকেশন বা পরিষেবা উপাদানগুলি প্রিলোড করার জন্য দৃ strongly এসডিকে বর্ণিত হিসাবে উদ্দেশ্য।

প্রতিটি ডিভাইসের ধরণের জন্য বাধ্যতামূলক অ্যাপ্লিকেশন উদ্দেশ্যগুলির জন্য অনুচ্ছেদ 2 দেখুন।

3.2.3.2। অভিপ্রায় রেজোলিউশন
  • [সি -0-1] অ্যান্ড্রয়েড হিসাবে একটি এক্সটেনসিবল প্ল্যাটফর্ম, ডিভাইস বাস্তবায়নগুলি সেটিংস ব্যতীত তৃতীয় পক্ষের অ্যাপ্লিকেশনগুলির দ্বারা ওভাররাইড করার জন্য বিভাগ 3.2.3.1 এ উল্লেখ করা প্রতিটি অভিপ্রায় প্যাটার্নকে অনুমতি দিতে হবে। আপস্ট্রিম অ্যান্ড্রয়েড ওপেন সোর্স বাস্তবায়ন ডিফল্টরূপে এটির অনুমতি দেয়।

  • [সি -0-2] ডিভাইস বাস্তবায়নকারীদের অবশ্যই সিস্টেম অ্যাপ্লিকেশনগুলির এই অভিপ্রায় নিদর্শনগুলির ব্যবহারের জন্য বিশেষ সুবিধাগুলি সংযুক্ত করা উচিত নয়, বা তৃতীয় পক্ষের অ্যাপ্লিকেশনগুলিকে এই নিদর্শনগুলির নিয়ন্ত্রণ এবং ধরে নেওয়া থেকে বিরত রাখতে বাধা দিতে হবে। এই নিষেধাজ্ঞার মধ্যে বিশেষভাবে অন্তর্ভুক্ত রয়েছে কিন্তু "নির্বাচক" ব্যবহারকারী ইন্টারফেস নিষ্ক্রিয় করার মধ্যেই সীমাবদ্ধ নয় যা ব্যবহারকারীকে একাধিক অ্যাপ্লিকেশনের মধ্যে নির্বাচন করতে দেয় যেগুলি একই অভিপ্রায় প্যাটার্ন পরিচালনা করে।

  • [C-0-3] ইন্টেন্টের জন্য ডিফল্ট কার্যকলাপ পরিবর্তন করার জন্য ডিভাইস বাস্তবায়ন ব্যবহারকারীদের জন্য একটি ইউজার ইন্টারফেস প্রদান করতে হবে।

  • যাইহোক, ডিভাইস বাস্তবায়ন নির্দিষ্ট URI প্যাটার্নের জন্য ডিফল্ট ক্রিয়াকলাপ প্রদান করতে পারে (যেমন http://play.google.com) যখন ডিফল্ট কার্যকলাপ ডেটা URI-এর জন্য আরও নির্দিষ্ট বৈশিষ্ট্য প্রদান করে। উদাহরণস্বরূপ, ডেটা URI “http://www.android.com” নির্দিষ্ট করে একটি ইন্টেন্ট ফিল্টার প্যাটার্ন “http://”-এর জন্য ব্রাউজারের মূল অভিপ্রায় প্যাটার্নের চেয়ে বেশি নির্দিষ্ট।

নির্দিষ্ট ধরণের ওয়েব URI ইন্টেন্টের জন্য একটি প্রামাণিক ডিফল্ট অ্যাপ লিঙ্কিং আচরণ ঘোষণা করার জন্য তৃতীয় পক্ষের অ্যাপগুলির জন্য অ্যান্ড্রয়েডের একটি ব্যবস্থাও রয়েছে। যখন এই ধরনের প্রামাণিক ঘোষণা একটি অ্যাপের অভিপ্রায় ফিল্টার প্যাটার্নে সংজ্ঞায়িত করা হয়, তখন ডিভাইস বাস্তবায়ন:

  • [C-0-4] আপস্ট্রিম অ্যান্ড্রয়েড ওপেন সোর্স প্রজেক্টে প্যাকেজ ম্যানেজার দ্বারা বাস্তবায়িত ডিজিটাল অ্যাসেট লিংক স্পেসিফিকেশনে সংজ্ঞায়িত বৈধকরণের পদক্ষেপগুলি সম্পাদন করে যেকোন অভিপ্রায় ফিল্টারকে যাচাই করার চেষ্টা করতে হবে।
  • [C-0-5] অ্যাপ্লিকেশন ইনস্টল করার সময় অভিপ্রায় ফিল্টারগুলির যাচাইকরণের চেষ্টা করতে হবে এবং তাদের URI-এর জন্য ডিফল্ট অ্যাপ হ্যান্ডলার হিসাবে সমস্ত সফলভাবে যাচাইকৃত URI অভিপ্রায় ফিল্টার সেট করতে হবে।
  • তাদের URI-এর জন্য ডিফল্ট অ্যাপ হ্যান্ডলার হিসেবে নির্দিষ্ট URI ইন্টেন্ট ফিল্টার সেট করতে পারে, যদি সেগুলি সফলভাবে যাচাই করা হয় কিন্তু অন্য প্রার্থী URI ফিল্টারগুলি যাচাই করতে ব্যর্থ হয়। যদি একটি ডিভাইস বাস্তবায়ন এটি করে, এটি অবশ্যই সেটিংস মেনুতে ব্যবহারকারীকে উপযুক্ত প্রতি URI প্যাটার্ন ওভাররাইড প্রদান করবে।
  • ব্যবহারকারীকে অবশ্যই সেটিংসে প্রতি-অ্যাপ অ্যাপ লিংক নিয়ন্ত্রণগুলি প্রদান করতে হবে:
    • [C-0-6] ব্যবহারকারীকে অবশ্যই একটি অ্যাপের জন্য ডিফল্ট অ্যাপ লিঙ্কের আচরণকে সামগ্রিকভাবে ওভাররাইড করতে সক্ষম হতে হবে: সর্বদা খুলুন, সর্বদা জিজ্ঞাসা করুন বা কখনই খুলবেন না, যা অবশ্যই সমস্ত প্রার্থী URI অভিপ্রায় ফিল্টারগুলিতে সমানভাবে প্রয়োগ করতে হবে।
    • [C-0-7] ব্যবহারকারী অবশ্যই প্রার্থী URI অভিপ্রায় ফিল্টারগুলির একটি তালিকা দেখতে সক্ষম হবেন।
    • ডিভাইস বাস্তবায়ন ব্যবহারকারীকে নির্দিষ্ট প্রার্থী URI অভিপ্রায় ফিল্টারগুলিকে ওভাররাইড করার ক্ষমতা প্রদান করতে পারে যা সফলভাবে যাচাই করা হয়েছে, প্রতি-ইন্টেন্ট ফিল্টারের ভিত্তিতে।
    • [C-0-8] ডিভাইস বাস্তবায়ন অবশ্যই ব্যবহারকারীদের নির্দিষ্ট প্রার্থী URI অভিপ্রায় ফিল্টার দেখতে এবং ওভাররাইড করার ক্ষমতা প্রদান করবে যদি ডিভাইস বাস্তবায়ন কিছু প্রার্থী URI অভিপ্রায় ফিল্টার যাচাইকরণ সফল করতে দেয় এবং কিছু অন্যরা ব্যর্থ হতে পারে।
3.2.3.3। অভিপ্রায় নামস্থান
  • [C-0-1] ডিভাইস বাস্তবায়নে এমন কোনো অ্যান্ড্রয়েড উপাদান অন্তর্ভুক্ত করা উচিত নয় যা অ্যান্ড্রয়েডে কোনো অ্যাকশন, ক্যাটাগরি বা অন্য কী স্ট্রিং ব্যবহার করে কোনো নতুন অভিপ্রায় বা সম্প্রচারের অভিপ্রায় প্যাটার্নকে সম্মান করে। অথবা com.android. নামস্থান
  • [C-0-2] ডিভাইস ইমপ্লিমেন্টারদের এমন কোনো অ্যান্ড্রয়েড উপাদান অন্তর্ভুক্ত করা উচিত নয় যা অন্য সংস্থার অন্তর্গত প্যাকেজ স্পেসে অ্যাকশন, ক্যাটাগরি বা অন্য কী স্ট্রিং ব্যবহার করে কোনো নতুন অভিপ্রায় বা সম্প্রচারের অভিপ্রায়ের ধরণকে সম্মান করে।
  • [সি -0-3] ডিভাইস প্রয়োগকারীদের অবশ্যই বিভাগ 3.2.3.1 এ তালিকাভুক্ত কোনও অভিপ্রায় নিদর্শন পরিবর্তন বা প্রসারিত করতে হবে না।
  • ডিভাইস বাস্তবায়নের মধ্যে স্পষ্টভাবে এবং স্পষ্টভাবে তাদের নিজস্ব প্রতিষ্ঠানের সাথে যুক্ত নামস্থান ব্যবহার করে অভিপ্রায় প্যাটার্ন অন্তর্ভুক্ত থাকতে পারে। এই নিষেধাজ্ঞাটি বিভাগ 3.6- এ জাভা ভাষার ক্লাসের জন্য নির্দিষ্ট করা অনুরূপ।
3.2.3.4। সম্প্রচার অভিপ্রায়

থার্ড-পার্টি অ্যাপ্লিকেশনগুলি হার্ডওয়্যার বা সফ্টওয়্যার পরিবেশের পরিবর্তন সম্পর্কে তাদের অবহিত করার জন্য নির্দিষ্ট উদ্দেশ্য সম্প্রচার করার জন্য প্ল্যাটফর্মের উপর নির্ভর করে।

ডিভাইস বাস্তবায়ন:

  • [সি -0-1] এসডিকে ডকুমেন্টেশনে বর্ণিত যথাযথ সিস্টেম ইভেন্টগুলির প্রতিক্রিয়া হিসাবে এখানে তালিকাভুক্ত পাবলিক সম্প্রচারের উদ্দেশ্যগুলি সম্প্রচার করতে হবে। মনে রাখবেন যে এই প্রয়োজনীয়তাটি বিভাগ 3.5 এর সাথে সাংঘর্ষিক নয় কারণ SDK ডকুমেন্টেশনে ব্যাকগ্রাউন্ড অ্যাপ্লিকেশনের সীমাবদ্ধতাও বর্ণনা করা হয়েছে। এছাড়াও কিছু সম্প্রচারের উদ্দেশ্যগুলি হার্ডওয়্যার সমর্থনের উপর শর্তযুক্ত, যদি ডিভাইসটি প্রয়োজনীয় হার্ডওয়্যারকে সমর্থন করে তবে তাদের অবশ্যই উদ্দেশ্যগুলি সম্প্রচার করতে হবে এবং এসডিকে ডকুমেন্টেশন সহ আচরণের ইনলাইন সরবরাহ করতে হবে।
3.2.3.5। শর্তাধীন অ্যাপ্লিকেশন উদ্দেশ্য

অ্যান্ড্রয়েডের মধ্যে এমন সেটিংস রয়েছে যা ব্যবহারকারীদের তাদের ডিফল্ট অ্যাপ্লিকেশন নির্বাচন করার একটি সহজ উপায় প্রদান করে, উদাহরণস্বরূপ হোম স্ক্রীন বা এসএমএস।

যেখানে এটি বোধগম্য হয়, ডিভাইস বাস্তবায়নে অবশ্যই একটি অনুরূপ সেটিংস মেনু প্রদান করতে হবে এবং নীচের মত SDK ডকুমেন্টেশনে বর্ণিত অভিপ্রায় ফিল্টার প্যাটার্ন এবং API পদ্ধতিগুলির সাথে সামঞ্জস্যপূর্ণ হতে হবে৷

ডিভাইস বাস্তবায়ন android.software.home_screen রিপোর্ট করলে, তারা:

  • [C-1-1] হোম স্ক্রিনের জন্য একটি ডিফল্ট অ্যাপ সেটিংস মেনু দেখানোর জন্য android.settings.HOME_SETTINGS অভিপ্রায়কে অবশ্যই সম্মান করতে হবে।

ডিভাইস বাস্তবায়ন android.hardware.telephony রিপোর্ট করলে, তারা:

ডিভাইস বাস্তবায়ন android.hardware.nfc.hce রিপোর্ট করলে, তারা:

যদি ডিভাইস বাস্তবায়নগুলি android.hardware.nfc রিপোর্ট করে তবে তারা:

  • [সি -৪-১] অবশ্যই এই উদ্দেশ্যগুলি সম্মান করতে হবে android.nfc.action.ndef_discovered , android.nfc.action.tag_discovered & android.nfc.action.tech_discovered , এমন একটি ক্রিয়াকলাপ দেখানোর জন্য যা এই ইন্টেন্টগুলির জন্য বিকাশকারীদের প্রত্যাশা পূরণ করে যা বর্ণিত হিসাবে বিকাশকারীদের প্রত্যাশা পূরণ করে SDK

যদি ডিভাইস বাস্তবায়নগুলি VoiceInteractionService সমর্থন করে এবং একবারে ইনস্টল করা এই এপিআই ব্যবহার করে একাধিক অ্যাপ্লিকেশন থাকে তবে তারা:

  • [সি -৪-১] অবশ্যই android.settings.ACTION_VOICE_INPUT_SETTINGS ভয়েস ইনপুট এবং সহায়তার জন্য একটি ডিফল্ট অ্যাপ্লিকেশন সেটিংস মেনু দেখানোর উদ্দেশ্যে সম্মান করতে হবে।

যদি ডিভাইস বাস্তবায়নগুলি android.hardware.bluetooth রিপোর্ট করে তবে তারা:

যদি ডিভাইস বাস্তবায়ন DND বৈশিষ্ট্য সমর্থন করে, তারা:

  • [সি -6-১] অবশ্যই এমন একটি ক্রিয়াকলাপ বাস্তবায়ন করতে হবে যা অভিপ্রায় ACTION_NOTIFICATION_POLICY_ACCESS_SETTINGS এর প্রতিক্রিয়া জানায়, যা UI_MODE_TYPE_NORMAL এর সাথে বাস্তবায়নের জন্য এটি অবশ্যই এমন একটি ক্রিয়াকলাপ হতে হবে যেখানে ব্যবহারকারী ডিএনডি নীতি কনফিগারেশনের অ্যাপ্লিকেশন অ্যাক্সেস মঞ্জুর বা অস্বীকার করতে পারে।

যদি ডিভাইস বাস্তবায়ন ব্যবহারকারীদের ডিভাইসে তৃতীয় পক্ষের ইনপুট পদ্ধতি ব্যবহার করার অনুমতি দেয়, তারা:

  • [সি -7-১] android.settings.INPUT_METHOD_SETTINGS ইনটেন্টের প্রতিক্রিয়া হিসাবে তৃতীয় পক্ষের ইনপুট পদ্ধতিগুলি যুক্ত এবং কনফিগার করতে একটি ব্যবহারকারী-অ্যাক্সেসযোগ্য প্রক্রিয়া সরবরাহ করতে হবে।

যদি ডিভাইস বাস্তবায়ন তৃতীয় পক্ষের অ্যাক্সেসিবিলিটি পরিষেবাগুলিকে সমর্থন করে, তারা:

যদি ডিভাইস বাস্তবায়নে Wi-Fi সহজ সংযোগের জন্য সমর্থন অন্তর্ভুক্ত থাকে এবং তৃতীয় পক্ষের অ্যাপ্লিকেশনগুলিতে কার্যকারিতাটি প্রকাশ করে, তারা:

যদি ডিভাইস বাস্তবায়নগুলি ডেটা সেভার মোড সরবরাহ করে তবে তারা: * [সি -10-1] অবশ্যই সেটিংসে একটি ব্যবহারকারী ইন্টারফেস সরবরাহ করতে হবে, যা Settings.ACTION_IGNORE_BACKGROUND_DATA_RESTRICTIONS_SETTINGS পরিচালনা করে action

যদি ডিভাইস বাস্তবায়নগুলি ডেটা সেভার মোড সরবরাহ না করে তবে তারা:

যদি ডিভাইস বাস্তবায়নগুলি android.hardware.camera.any মাধ্যমে ক্যামেরার জন্য সমর্থন ঘোষণা করে তবে তারা:

যদি ডিভাইস বাস্তবায়নগুলি android.software.device_admin রিপোর্ট করে তবে তারা:

যদি ডিভাইস বাস্তবায়ন android.software.autofill বৈশিষ্ট্য পতাকা ঘোষণা করে, তারা:

যদি ডিভাইস বাস্তবায়নে একটি প্রাক-ইনস্টলড অ্যাপ্লিকেশন অন্তর্ভুক্ত থাকে বা তৃতীয় পক্ষের অ্যাপ্লিকেশনগুলিকে ব্যবহারের পরিসংখ্যান অ্যাক্সেস করার অনুমতি দিতে ইচ্ছুক থাকে তবে তারা:

  • [সি-এসআর] অ্যান্ড্রয়েড.সেটেটিং.অ্যাকশন_উজেজ_সেস_সেসটিংসের অভিপ্রায় যা android.permission.PACKAGE_USAGE_STATS অনুমতিগুলি ঘোষণা করে তার প্রতিক্রিয়া হিসাবে ব্যবহারের পরিসংখ্যানগুলিতে অ্যাক্সেস মঞ্জুর বা প্রত্যাহার করার জন্য ব্যবহারকারী-অ্যাক্সেসযোগ্য প্রক্রিয়া সরবরাহ করার জন্য দৃ strongly ়ভাবে সুপারিশ করা হয়।

যদি ডিভাইস বাস্তবায়নগুলি ব্যবহারের পরিসংখ্যান অ্যাক্সেস থেকে প্রাক-ইনস্টলড অ্যাপ্লিকেশন সহ কোনও অ্যাপ্লিকেশনকে অস্বীকার করার ইচ্ছা করে তবে তারা:

  • [সি -15-1] এখনও অবশ্যই একটি ক্রিয়াকলাপ থাকতে হবে যা অ্যান্ড্রয়েড.সেটিংস.অ্যাকশন_উজেজ_অ্যাকসেস_সেটেটিং ইনটেন্ট প্যাটার্নটি পরিচালনা করে তবে এটি অবশ্যই একটি নন-ওপি হিসাবে প্রয়োগ করতে হবে, এটি যখন ব্যবহারকারী অ্যাক্সেসের জন্য অস্বীকার করা হয় তখন সমতুল্য আচরণ করা উচিত।

যদি ডিভাইস বাস্তবায়নগুলি android.hardware.audio.output বৈশিষ্ট্যটি প্রতিবেদন করে তবে তারা:

  • [সি-এসআর] android.intent.action.tts_service, android.speech.ttts.engine.install_tts_data এবং android.speech.tts.engine.get_sample_text ইন্টেন্টসকে এই ইন্টেন্টগুলির জন্য একটি ক্রিয়াকলাপ রয়েছে যেমন এই ইন্টেন্টগুলির জন্য একটি ক্রিয়াকলাপ রয়েছে এসডিকে এখানে

অ্যান্ড্রয়েডে ইন্টারেক্টিভ স্ক্রিনসেভারগুলির জন্য সমর্থন অন্তর্ভুক্ত রয়েছে, যা আগে স্বপ্ন হিসাবে উল্লেখ করা হয়। স্ক্রিন সেভারগুলি ব্যবহারকারীদের অ্যাপ্লিকেশনগুলির সাথে ইন্টারঅ্যাক্ট করার অনুমতি দেয় যখন কোনও পাওয়ার উত্সের সাথে সংযুক্ত কোনও ডিভাইস নিষ্ক্রিয় বা ডেস্ক ডকে ডক করা হয়। ডিভাইস বাস্তবায়ন:

  • স্ক্রিন সেভারদের জন্য সমর্থন অন্তর্ভুক্ত করা উচিত এবং android.settings.DREAM_SETTINGS ইনটেন্টের প্রতিক্রিয়া হিসাবে ব্যবহারকারীদের স্ক্রিন সেভারগুলি কনফিগার করার জন্য একটি সেটিংস বিকল্প সরবরাহ করা উচিত।

3.2.4। মাধ্যমিক/একাধিক ডিসপ্লেতে ক্রিয়াকলাপ

যদি ডিভাইস বাস্তবায়নগুলি একাধিক ডিসপ্লেতে স্বাভাবিক অ্যান্ড্রয়েড ক্রিয়াকলাপ চালু করার অনুমতি দেয় তবে তারা:

  • [C-1-1] অবশ্যই android.software.activities_on_secondary_displays বৈশিষ্ট্যের পতাকা সেট করতে হবে।
  • [C-1-2] প্রাথমিক ডিসপ্লেতে চলমান একটি কার্যকলাপের মতো API সামঞ্জস্যের নিশ্চয়তা দিতে হবে।
  • [C-1-3] ActivityOptions.setLaunchDisplayId() API-এর মাধ্যমে একটি টার্গেট ডিসপ্লে নির্দিষ্ট না করেই যখন নতুন অ্যাক্টিভিটি চালু করা হয় তখন অ্যাক্টিভিটি যে অ্যাক্টিভিটিটি চালু করেছিল সেই একই ডিসপ্লেতে নতুন অ্যাক্টিভিটি ল্যান্ড করতে হবে।
  • [C-1-4] সমস্ত ক্রিয়াকলাপ ধ্বংস করতে হবে, যখন Display.FLAG_PRIVATE পতাকা সহ একটি প্রদর্শন সরানো হয়।
  • [সি -1-5] ডিভাইসটি একটি সুরক্ষিত লক স্ক্রিন দিয়ে লক করা থাকলে অবশ্যই সমস্ত স্ক্রিনে সুরক্ষিতভাবে সামগ্রীটি লুকিয়ে রাখতে হবে, যদি না অ্যাপ্লিকেশনটি Activity#setShowWhenLocked() এপিআই ব্যবহার করে লক স্ক্রিনের শীর্ষে প্রদর্শিত না হয়।
  • android.content.res.Configuration থাকতে হবে যা প্রদর্শন করার জন্য সেই ডিসপ্লের সাথে মিলে যায়, সঠিকভাবে কাজ করে এবং যদি সেকেন্ডারি ডিসপ্লেতে কোনো অ্যাক্টিভিটি চালু করা হয় তাহলে সামঞ্জস্য বজায় রাখা।

ডিভাইস বাস্তবায়ন যদি সেকেন্ডারি ডিসপ্লেতে স্বাভাবিক অ্যান্ড্রয়েড অ্যাক্টিভিটি চালু করার অনুমতি দেয় এবং সেকেন্ডারি ডিসপ্লেতে android.view.Display.FLAG_PRIVATE পতাকা থাকে:

  • [C-3-1] শুধুমাত্র সেই ডিসপ্লে, সিস্টেম এবং কার্যকলাপের মালিক যেগুলি ইতিমধ্যেই সেই ডিসপ্লেতে রয়েছে তারা অবশ্যই এটি চালু করতে সক্ষম হবে। android.view.Display.FLAG_PUBLIC পতাকা আছে এমন একটি ডিসপ্লেতে সবাই লঞ্চ করতে পারে৷

3.3। নেটিভ API সামঞ্জস্য

নেটিভ কোড সামঞ্জস্য চ্যালেঞ্জিং. এই কারণে, ডিভাইস বাস্তবায়নকারীরা হল:

  • [SR] আপস্ট্রিম অ্যান্ড্রয়েড ওপেন সোর্স প্রকল্প থেকে নীচে তালিকাভুক্ত লাইব্রেরিগুলির বাস্তবায়ন ব্যবহার করার জন্য দৃঢ়ভাবে সুপারিশ করা হয়েছে।

3.3.1। অ্যাপ্লিকেশন বাইনারি ইন্টারফেস

পরিচালিত ডালভিক বাইটকোড একটি ELF হিসাবে অ্যাপ্লিকেশন .apk ফাইলে প্রদত্ত নেটিভ কোডে কল করতে পারে .so উপযুক্ত ডিভাইস হার্ডওয়্যার আর্কিটেকচারের জন্য সংকলিত ফাইল। যেহেতু নেটিভ কোড অন্তর্নিহিত প্রসেসর প্রযুক্তির উপর অত্যন্ত নির্ভরশীল, তাই Android NDK-তে বেশ কয়েকটি অ্যাপ্লিকেশন বাইনারি ইন্টারফেস (ABIs) সংজ্ঞায়িত করে।

ডিভাইস বাস্তবায়ন:

  • [সি -0-1] অবশ্যই এক বা একাধিক সংজ্ঞায়িত অ্যান্ড্রয়েড এনডিকে এবিসের সাথে সামঞ্জস্যপূর্ণ হতে হবে।
  • [C-0-2] স্ট্যান্ডার্ড জাভা নেটিভ ইন্টারফেস (JNI) শব্দার্থবিদ্যা ব্যবহার করে নেটিভ কোডে কল করার জন্য পরিচালিত পরিবেশে চলমান কোডের সমর্থন অন্তর্ভুক্ত করতে হবে।
  • [C-0-3] নীচের তালিকায় প্রতিটি প্রয়োজনীয় লাইব্রেরির সাথে উত্স-সামঞ্জস্যপূর্ণ (যেমন শিরোনাম-সামঞ্জস্যপূর্ণ) এবং বাইনারি-সামঞ্জস্যপূর্ণ (ABI-এর জন্য) হতে হবে।
  • [C-0-5] android.os.Build.SUPPORTED_ABIS , android.os.Build.SUPPORTED_32_BIT_ABIS , এবং android.os.Build.SUPPORTED_64_BIT_ABIS মিটার প্যারামিটারের মাধ্যমে ডিভাইস দ্বারা সমর্থিত নেটিভ অ্যাপ্লিকেশন বাইনারি ইন্টারফেস (ABI) সঠিকভাবে রিপোর্ট করতে হবে , প্রতিটি ABI-এর কমা দ্বারা বিভক্ত তালিকা সর্বাধিক থেকে সর্বনিম্ন পছন্দের একটি পর্যন্ত অর্ডার করা হয়েছে।
  • [সি -0-6] অবশ্যই উপরের প্যারামিটারগুলির মাধ্যমে, এবিআইএসের নিম্নলিখিত তালিকার একটি উপসেট অবশ্যই রিপোর্ট করতে হবে এবং তালিকায় নেই এমন কোনও এবিআই রিপোর্ট করতে হবে না।

    • armeabi (এনডিকে দ্বারা লক্ষ্য হিসাবে আর সমর্থিত নয়)
    • armeabi-v7a
    • arm64-v8a
    • x86
    • x86-64
  • [C-0-7] নিম্নলিখিত সমস্ত লাইব্রেরি তৈরি করতে হবে, নেটিভ এপিআই প্রদান করে, এমন অ্যাপগুলির জন্য উপলব্ধ যা নেটিভ কোড অন্তর্ভুক্ত করে:

    • libaaudio.so (AAudio নেটিভ অডিও সমর্থন)
    • libamidi.so (নেটিভ এমআইডিআই সমর্থন, যদি বৈশিষ্ট্য android.software.midi বিভাগ 5.9 এ বর্ণিত হিসাবে দাবি করা হয়)
    • libandroid.so (নেটিভ অ্যান্ড্রয়েড কার্যকলাপ সমর্থন)
    • libc (সি লাইব্রেরি)
    • libcamera2ndk.so
    • libdl (গতিশীল লিঙ্কার)
    • libEGL.so (নেটিভ OpenGL পৃষ্ঠ ব্যবস্থাপনা)
    • libGLESv1_CM.so (OpenGL ES 1.x)
    • libGLESv2.so (OpenGL ES 2.0)
    • libGLESv3.so (OpenGL ES 3.x)
    • libicui18n.so
    • libicuuc.so
    • libjnigraphics.so
    • liblog (Android লগিং)
    • libmediandk.so (নেটিভ মিডিয়া API সমর্থন)
    • libm (গণিত গ্রন্থাগার)
    • libneuralnetworks.so (নিউরাল নেটওয়ার্ক এপিআই)
    • libOpenMAXAL.so (OpenMAX AL 1.0.1 সমর্থন)
    • libOpenSLES.so (OpenSL ES 1.0.1 অডিও সমর্থন)
    • libRS.so
    • libstdc++ (C++ এর জন্য ন্যূনতম সমর্থন)
    • libvulkan.so (ভুলকান)
    • libz (Zlib কম্প্রেশন)
    • JNI ইন্টারফেস
  • [C-0-8] উপরে তালিকাভুক্ত নেটিভ লাইব্রেরিগুলির জন্য পাবলিক ফাংশনগুলি যোগ করা বা অপসারণ করা উচিত নয়।

  • [C-0-9] /vendor/etc/public.libraries.txt এ তৃতীয় পক্ষের অ্যাপের কাছে সরাসরি উন্মুক্ত অতিরিক্ত নন-AOSP লাইব্রেরি তালিকাভুক্ত করতে হবে।
  • [C-0-10] AOSP-এ সিস্টেম লাইব্রেরি হিসাবে প্রয়োগ করা এবং সরবরাহ করা অন্য কোনো নেটিভ লাইব্রেরিগুলিকে API স্তর 24 বা উচ্চতর টার্গেট করা তৃতীয় পক্ষের অ্যাপের কাছে প্রকাশ করা উচিত নয় কারণ সেগুলি সংরক্ষিত।
  • [C-0-11] libGLESv3.so লাইব্রেরির মাধ্যমে NDK-তে সংজ্ঞায়িত সমস্ত OpenGL ES 3.1 এবং Android এক্সটেনশন প্যাক ফাংশন চিহ্ন অবশ্যই রপ্তানি করতে হবে। মনে রাখবেন যে সমস্ত প্রতীক উপস্থিত থাকা আবশ্যক, অনুচ্ছেদ 7.1.4.1 প্রতিটি সংশ্লিষ্ট ফাংশনের সম্পূর্ণ বাস্তবায়ন কখন প্রত্যাশিত হবে তার প্রয়োজনীয়তাগুলি আরও বিশদভাবে বর্ণনা করে৷
  • [সি -0-12] মূল ভলকান 1.0 ফাংশন প্রতীকগুলির জন্য ফাংশন প্রতীকগুলি রফতানি libvulkan.so VK_KHR_maintenance1 , পাশাপাশি VK_KHR_surface , VK_KHR_android_surface , VK_KHR_swapchain , VK_KHR_get_physical_device_properties2 মনে রাখবেন যে সমস্ত প্রতীক উপস্থিত থাকা আবশ্যক, অনুচ্ছেদ 7.1.4.2 প্রতিটি সংশ্লিষ্ট ফাংশনের সম্পূর্ণ বাস্তবায়ন কখন প্রত্যাশিত হবে তার প্রয়োজনীয়তাগুলি আরও বিশদভাবে বর্ণনা করে৷
  • আপস্ট্রিম অ্যান্ড্রয়েড ওপেন সোর্স প্রকল্পে উপলব্ধ সোর্স কোড এবং হেডার ফাইলগুলি ব্যবহার করে তৈরি করা উচিত৷

নোট করুন যে অ্যান্ড্রয়েডের ভবিষ্যতের প্রকাশগুলি অতিরিক্ত এবিআইয়ের জন্য সমর্থন প্রবর্তন করতে পারে।

3.3.2। 32-বিট এআরএম নেটিভ কোড সামঞ্জস্য

যদি ডিভাইস বাস্তবায়নগুলি armeabi আবির সমর্থনের প্রতিবেদন করে তবে তারা:

  • [সি -৩-১] অবশ্যই armeabi-v7a সমর্থন করতে হবে এবং এর সমর্থনটি রিপোর্ট করতে হবে, কারণ armeabi কেবল পুরানো অ্যাপ্লিকেশনগুলির সাথে পিছনের সামঞ্জস্যের জন্য।

যদি ডিভাইস বাস্তবায়নগুলি এই এবিআই ব্যবহার করে অ্যাপ্লিকেশনগুলির জন্য armeabi-v7a এবিআইয়ের সমর্থনটি প্রতিবেদন করে তবে তারা:

  • [সি -২-১] অবশ্যই নিম্নলিখিত লাইনগুলি /proc/cpuinfo এ অন্তর্ভুক্ত করতে হবে এবং অন্যান্য এবিআই দ্বারা পড়ার পরেও একই ডিভাইসে মানগুলি পরিবর্তন করা উচিত নয়।

    • Features: , ডিভাইস দ্বারা সমর্থিত যেকোনো ঐচ্ছিক ARMv7 CPU বৈশিষ্ট্যগুলির একটি তালিকা অনুসরণ করে৷
    • CPU architecture: , ডিভাইসের সর্বোচ্চ সমর্থিত ARM আর্কিটেকচার বর্ণনা করে একটি পূর্ণসংখ্যা দ্বারা অনুসরণ করা হয় (যেমন, ARMv8 ডিভাইসের জন্য "8")।
  • [সি -২-২] অবশ্যই সর্বদা নিম্নলিখিত ক্রিয়াকলাপগুলি উপলভ্য রাখতে হবে, এমনকি যে ক্ষেত্রে এবিআই একটি এআরএমভি 8 আর্কিটেকচারে প্রয়োগ করা হয়েছে, হয় নেটিভ সিপিইউ সমর্থনের মাধ্যমে বা সফ্টওয়্যার অনুকরণের মাধ্যমে:

    • এসডাব্লুপি এবং এসডাব্লুপিবি নির্দেশাবলী।
    • সেটেন্ড নির্দেশনা।
    • সিপি 15 আইএসবি, সিপি 15 ডিএসবি এবং সিপি 15 ডিএমবি বাধা অপারেশন।
  • [সি -২-৩] অবশ্যই উন্নত সিমডি (ওরফে নিওন) এক্সটেনশনের জন্য সমর্থন অন্তর্ভুক্ত করতে হবে।

3.4। ওয়েব সামঞ্জস্যতা

3.4.1। ওয়েবভিউ সামঞ্জস্য

যদি ডিভাইস বাস্তবায়ন android.webkit.Webview API-এর সম্পূর্ণ বাস্তবায়ন প্রদান করে, তারা:

  • [C-1-1] android.software.webview রিপোর্ট করতে হবে।
  • [সি -১-২] android.webkit.WebView এপিআই বাস্তবায়নের জন্য অ্যান্ড্রয়েড 11 শাখায় উজানের অ্যান্ড্রয়েড ওপেন সোর্স প্রকল্প থেকে ক্রোমিয়াম প্রকল্প বিল্ডটি ব্যবহার করতে হবে।
  • [C-1-3] WebView দ্বারা রিপোর্ট করা ব্যবহারকারী এজেন্ট স্ট্রিং এই বিন্যাসে হওয়া আবশ্যক:

    মোজিলা/5.0 (লিনাক্স; অ্যান্ড্রয়েড $ (সংস্করণ); [$ (মডেল)] [বিল্ড/$ (বিল্ড)]; ডাব্লুভি) অ্যাপলওয়েবকিট/537.36 (কেএইচটিএমএল, গেকোর মতো) সংস্করণ/4.0 $ (ক্রোমিয়াম_ভার) মোবাইল সাফারি/537.36

    • $(VERSION) স্ট্রিংয়ের মান অবশ্যই android.os.Build.VERSION.RELEASE-এর মানের সমান হতে হবে।
    • $ (মডেল) স্ট্রিংটি খালি থাকতে পারে, তবে এটি খালি না থাকলে এটির অবশ্যই অ্যান্ড্রয়েড.ওস.বিল্ড.মোডেলের মতো মান থাকতে হবে।
    • "বিল্ড/$ (বিল্ড)" বাদ দেওয়া যেতে পারে, তবে এটি উপস্থিত থাকলে $ (বিল্ড) স্ট্রিংটি অবশ্যই অ্যান্ড্রয়েড.ওএস.বিল্ড.আইডি এর মান হিসাবে একই হতে হবে।
    • $(CHROMIUM_VER) স্ট্রিংটির মান অবশ্যই আপস্ট্রিম অ্যান্ড্রয়েড ওপেন সোর্স প্রকল্পে ক্রোমিয়ামের সংস্করণ হতে হবে।
    • ডিভাইস বাস্তবায়ন ব্যবহারকারী এজেন্ট স্ট্রিং-এ মোবাইল বাদ দিতে পারে।
  • WebView উপাদানটিতে যতটা সম্ভব HTML5 বৈশিষ্ট্যের জন্য সমর্থন অন্তর্ভুক্ত করা উচিত এবং যদি এটি বৈশিষ্ট্যটিকে সমর্থন করে তাহলে HTML5 স্পেসিফিকেশনের সাথে সঙ্গতিপূর্ণ হওয়া উচিত।

  • [সি -১-৩] অবশ্যই এমন একটি প্রক্রিয়াতে প্রদত্ত সামগ্রী বা দূরবর্তী ইউআরএল সামগ্রী রেন্ডার করতে হবে যা ওয়েবভিউটি ইনস্ট্যান্ট করে এমন অ্যাপ্লিকেশন থেকে পৃথক। বিশেষত পৃথক রেন্ডারার প্রক্রিয়াটি অবশ্যই কম সুবিধা অর্জন করতে হবে, একটি পৃথক ব্যবহারকারী আইডি হিসাবে চালাতে হবে, অ্যাপের ডেটা ডিরেক্টরিতে কোনও অ্যাক্সেস নেই, সরাসরি নেটওয়ার্ক অ্যাক্সেস নেই, এবং কেবল বাইন্ডারের মাধ্যমে ন্যূনতম-প্রয়োজনীয় সিস্টেম পরিষেবাগুলিতে অ্যাক্সেস থাকতে হবে। ওয়েবভিউয়ের এওএসপি বাস্তবায়ন এই প্রয়োজনীয়তা পূরণ করে।

মনে রাখবেন যে ডিভাইস বাস্তবায়নগুলি 32-বিট হয় বা বৈশিষ্ট্যযুক্ত পতাকা android.hardware.ram.low ঘোষণা করে তবে সেগুলি সি -1-3 থেকে অব্যাহতিপ্রাপ্ত।

3.4.2। ব্রাউজার সামঞ্জস্য

যদি ডিভাইস বাস্তবায়নে সাধারণ ওয়েব ব্রাউজিংয়ের জন্য একটি স্বতন্ত্র ব্রাউজার অ্যাপ্লিকেশন অন্তর্ভুক্ত থাকে, তারা:

  • [C-1-1] HTML5 এর সাথে যুক্ত এই APIগুলির প্রত্যেকটিকে সমর্থন করতে হবে:
  • [C-1-2] অবশ্যই HTML5/W3C ওয়েবস্টোরেজ API সমর্থন করতে হবে এবং HTML5/W3C IndexedDB API সমর্থন করা উচিত। নোট করুন যে ওয়েব ডেভেলপমেন্ট স্ট্যান্ডার্ড সংস্থাগুলি ওয়েবস্টোরেজের উপর IndexedDB-এর পক্ষে রূপান্তরিত হচ্ছে, IndexedDB Android এর ভবিষ্যতের সংস্করণে একটি প্রয়োজনীয় উপাদান হয়ে উঠবে বলে আশা করা হচ্ছে।
  • স্বতন্ত্র ব্রাউজার অ্যাপ্লিকেশনে একটি কাস্টম ব্যবহারকারী এজেন্ট স্ট্রিং পাঠাতে পারে৷
  • স্বতন্ত্র ব্রাউজার অ্যাপ্লিকেশনে (আপস্ট্রিম ওয়েবকিট ব্রাউজার অ্যাপ্লিকেশন বা তৃতীয় পক্ষের প্রতিস্থাপনের উপর ভিত্তি করে) যতটা সম্ভব HTML5- এর জন্য সমর্থন প্রয়োগ করা উচিত।

যাইহোক, যদি ডিভাইস বাস্তবায়নে একটি স্বতন্ত্র ব্রাউজার অ্যাপ্লিকেশন অন্তর্ভুক্ত না হয়, তারা:

  • [C-2-1] সেকশন 3.2.3.1- এ বর্ণিত পাবলিক ইন্টেন্ট প্যাটার্নগুলিকে এখনও সমর্থন করতে হবে।

3.5। API আচরণগত সামঞ্জস্য

ডিভাইস বাস্তবায়ন:

  • [সি -0-9] অবশ্যই নিশ্চিত করতে হবে যে এপিআই আচরণগত সামঞ্জস্যতা সমস্ত ইনস্টলড অ্যাপ্লিকেশনগুলির জন্য প্রয়োগ করা হয় যদি না সেগুলি বিভাগ 3.5.1- এ বর্ণিত হিসাবে সীমাবদ্ধ না করা হয়।
  • [সি -0-10] অবশ্যই ডিভাইস প্রয়োগকারীদের দ্বারা নির্বাচিত অ্যাপ্লিকেশনগুলির জন্য এপিআই আচরণগত সামঞ্জস্যতা নিশ্চিত করে এমন অনুমতি দেওয়ার পদ্ধতির প্রয়োগ করতে হবে না।

প্রতিটি API প্রকারের আচরণ (পরিচালিত, নরম, নেটিভ এবং ওয়েব) অবশ্যই আপস্ট্রিম অ্যান্ড্রয়েড ওপেন সোর্স প্রকল্পের পছন্দের বাস্তবায়নের সাথে সামঞ্জস্যপূর্ণ হতে হবে। সামঞ্জস্যের কিছু নির্দিষ্ট ক্ষেত্র হল:

  • [C-0-1] ডিভাইসগুলি অবশ্যই একটি আদর্শ অভিপ্রায়ের আচরণ বা শব্দার্থ পরিবর্তন করবে না।
  • [C-0-2] ডিভাইসগুলি অবশ্যই একটি নির্দিষ্ট ধরণের সিস্টেম উপাদানের জীবনচক্র বা জীবনচক্রের শব্দার্থ পরিবর্তন করবে না (যেমন পরিষেবা, কার্যকলাপ, সামগ্রী সরবরাহকারী, ইত্যাদি)৷
  • [C-0-3] ডিভাইসগুলি অবশ্যই একটি আদর্শ অনুমতির শব্দার্থ পরিবর্তন করবে না।
  • ডিভাইসগুলি অবশ্যই ব্যাকগ্রাউন্ড অ্যাপ্লিকেশনগুলিতে প্রয়োগ করা সীমাবদ্ধতাগুলিকে পরিবর্তন করবে না৷ আরও নির্দিষ্টভাবে, ব্যাকগ্রাউন্ড অ্যাপের জন্য:
    • [C-0-4] তাদের অবশ্যই GnssMeasurement এবং GnssNavigationMessage থেকে আউটপুট পাওয়ার জন্য অ্যাপ দ্বারা নিবন্ধিত কলব্যাকগুলি চালানো বন্ধ করতে হবে।
    • [C-0-5] তাদের অবশ্যই LocationManager API ক্লাস বা WifiManager.startScan() পদ্ধতির মাধ্যমে অ্যাপে সরবরাহ করা আপডেটের ফ্রিকোয়েন্সি রেট-সীমিত করতে হবে।
    • [C-0-6] যদি অ্যাপটি এপিআই লেভেল 25 বা তার বেশিকে টার্গেট করে, তাহলে তারা অবশ্যই অ্যাপের ম্যানিফেস্টে স্ট্যান্ডার্ড অ্যান্ড্রয়েড ইন্টেন্টের অন্তর্নিহিত সম্প্রচারের জন্য ব্রডকাস্ট রিসিভারদের নিবন্ধন করার অনুমতি দেবে না, যদি না সম্প্রচারের অভিপ্রায়ের জন্য "signature" "signatureOrSystem" প্রয়োজন হয়। "signatureOrSystem" protectionLevel অনুমতি বা ছাড়ের তালিকায় রয়েছে।
    • [C-0-7] যদি অ্যাপটি এপিআই লেভেল 25 বা তার বেশি টার্গেট করে, তাহলে তাদের অবশ্যই অ্যাপটির ব্যাকগ্রাউন্ড পরিষেবাগুলি বন্ধ করতে হবে, ঠিক যেমন অ্যাপটি পরিষেবাগুলিকে ' stopSelf() পদ্ধতি বলেছিল, যদি না অ্যাপটিকে একটি অস্থায়ী অনুমতি তালিকায় রাখা হয়। ব্যবহারকারীর কাছে দৃশ্যমান একটি কাজ পরিচালনা করতে।
    • [C-0-8] যদি অ্যাপটি API লেভেল 25 বা তার বেশিকে টার্গেট করে, তাহলে তাদের অবশ্যই অ্যাপের ধারণকৃত ওয়েকলকগুলি ছেড়ে দিতে হবে।
  • [সি -0-9] ডিভাইসগুলি অবশ্যই সুরক্ষা সরবরাহকারীকে Security.getProviders() পদ্ধতি, প্রদত্ত ক্রমে এবং প্রদত্ত নামগুলির সাথে ( Provider.getName() দ্বারা ফেরত হিসাবে ফিরে আসে) এবং ক্লাসগুলি থেকে নিম্নলিখিত সুরক্ষা সরবরাহকারীদের অবশ্যই ফিরিয়ে দিতে হবে , যদি না অ্যাপ্লিকেশনটি insertProviderAt() বা removeProvider() এর মাধ্যমে তালিকাটি পরিবর্তন না করে। ডিভাইসগুলি নীচে সরবরাহকারীদের নির্দিষ্ট তালিকার পরে অতিরিক্ত সরবরাহকারীদের ফিরিয়ে দিতে পারে।
    1. অ্যান্ড্রয়েডএনএসএসপি - android.security.net.config.NetworkSecurityConfigProvider
    2. অ্যান্ড্রয়েডোপেনসএল - com.android.org.conscrypt.OpenSSLProvider
    3. সার্টিপ্যাথপ্রোভাইডার - sun.security.provider.CertPathProvider
    4. অ্যান্ড্রয়েডকিস্টোরব্যাক ওয়ার্কআরাউন্ড - android.security.keystore.AndroidKeyStoreBCWorkaroundProvider ওয়ার্কআরাউন্ডপ্রোভিডার
    5. বিসি - com.android.org.bouncycastle.jce.provider.BouncyCastleProvider
    6. হারমোনিজে - com.android.org.conscrypt.JSSEProvider
    7. অ্যান্ড্রয়েডকিস্টোর - android.security.keystore.AndroidKeyStoreProvider

উপরের তালিকাটি ব্যাপক নয়। কম্প্যাটিবিলিটি টেস্ট স্যুট (সিটিএস) আচরণগত সামঞ্জস্যের জন্য প্ল্যাটফর্মের উল্লেখযোগ্য অংশ পরীক্ষা করে, কিন্তু সবগুলো নয়। Android ওপেন সোর্স প্রকল্পের সাথে আচরণগত সামঞ্জস্য নিশ্চিত করা বাস্তবায়নকারীর দায়িত্ব। এই কারণে, ডিভাইস বাস্তবায়নকারীদের সিস্টেমের উল্লেখযোগ্য অংশগুলিকে পুনরায় প্রয়োগ করার পরিবর্তে যেখানে সম্ভব Android ওপেন সোর্স প্রকল্পের মাধ্যমে উপলব্ধ সোর্স কোড ব্যবহার করা উচিত।

3.5.1। অ্যাপ্লিকেশন সীমাবদ্ধতা

যদি ডিভাইস বাস্তবায়নগুলি অ্যাপ্লিকেশনগুলিকে সীমাবদ্ধ করার জন্য একটি মালিকানাধীন প্রক্রিয়া প্রয়োগ করে এবং বিরল অ্যাপ স্ট্যান্ডবাই বালতিটির চেয়ে সেই প্রক্রিয়াটি আরও সীমাবদ্ধ, তারা:

  • [সি -1-1] অবশ্যই ব্যবহারকারীর সাশ্রয়ীতা সরবরাহ করতে হবে যেখানে ব্যবহারকারী সীমাবদ্ধ অ্যাপ্লিকেশনগুলির তালিকা দেখতে পারে।
  • [সি -1-2] প্রতিটি অ্যাপ্লিকেশনটিতে বিধিনিষেধগুলি চালু / বন্ধ করতে ব্যবহারকারীর সাশ্রয়ীতা সরবরাহ করতে হবে।
  • [সি -১-৩] সিস্টেমের স্বাস্থ্যগত আচরণের প্রমাণ ছাড়াই স্বয়ংক্রিয়ভাবে নিষেধাজ্ঞাগুলি প্রয়োগ করা উচিত নয়, তবে আটকে থাকা ওয়াকলকস, দীর্ঘ চলমান পরিষেবা এবং অন্যান্য মানদণ্ডের মতো দুর্বল সিস্টেমের স্বাস্থ্য আচরণ সনাক্তকরণের পরে অ্যাপ্লিকেশনগুলিতে বিধিনিষেধগুলি প্রয়োগ করতে পারে। মানদণ্ডগুলি ডিভাইস প্রয়োগকারীদের দ্বারা নির্ধারিত হতে পারে তবে অবশ্যই সিস্টেমের স্বাস্থ্যের উপর অ্যাপ্লিকেশনটির প্রভাবের সাথে সম্পর্কিত হতে হবে। অন্যান্য মানদণ্ড যা নিখুঁতভাবে সিস্টেম স্বাস্থ্যের সাথে সম্পর্কিত নয়, যেমন অ্যাপের বাজারে জনপ্রিয়তার অভাব, অবশ্যই মানদণ্ড হিসাবে ব্যবহার করা উচিত নয়।
  • [সি -1-4] যখন কোনও ব্যবহারকারী অ্যাপগুলির জন্য ম্যানুয়ালি অ্যাপ্লিকেশন বিধিনিষেধ বন্ধ করে দেয় এবং অ্যাপগুলির জন্য অ্যাপগুলির জন্য অ্যাপের সীমাবদ্ধতাগুলি স্বয়ংক্রিয়ভাবে প্রয়োগ করা উচিত নয় এবং ব্যবহারকারীকে অ্যাপ্লিকেশন সীমাবদ্ধতা প্রয়োগ করার পরামর্শ দিতে পারে।
  • [সি -1-5] যদি অ্যাপ্লিকেশনগুলিতে স্বয়ংক্রিয়ভাবে কোনও অ্যাপ্লিকেশন প্রয়োগ করা হয় তবে ব্যবহারকারীদের অবশ্যই অবহিত করতে হবে। সীমাবদ্ধতা প্রয়োগ করা হলে এই জাতীয় তথ্য অবশ্যই 24 ঘন্টার মধ্যে সরবরাহ করতে হবে।
  • [সি -1-6] ক্রিয়াকলাপ ম্যানেজারের জন্য অবশ্যই true প্রত্যাবর্তন করতে হবে ActivityManager.isBackgroundRestricted() যখন সীমাবদ্ধ অ্যাপটি এই এপিআইকে কল করে।
  • [সি -1-7] অবশ্যই ব্যবহারকারী দ্বারা স্পষ্টভাবে ব্যবহৃত শীর্ষ অগ্রভাগ অ্যাপ্লিকেশনটিকে সীমাবদ্ধ করা উচিত নয়।
  • [সি -1-8] অবশ্যই কোনও অ্যাপ্লিকেশনটিতে বিধিনিষেধগুলি স্থগিত করতে হবে যা ব্যবহারকারী স্পষ্টভাবে সীমাবদ্ধ থাকত এমন অ্যাপটি ব্যবহার করতে শুরু করে যখন শীর্ষ অগ্রভাগের অ্যাপ্লিকেশন হয়ে যায়।

3.6। API নামস্থান

অ্যান্ড্রয়েড জাভা প্রোগ্রামিং ভাষা দ্বারা সংজ্ঞায়িত প্যাকেজ এবং ক্লাস নেমস্পেস কনভেনশন অনুসরণ করে। তৃতীয় পক্ষের অ্যাপ্লিকেশনগুলির সাথে সামঞ্জস্য নিশ্চিত করতে, ডিভাইস বাস্তবায়নকারীরা এই প্যাকেজ নেমস্পেসগুলিতে কোনও নিষিদ্ধ পরিবর্তন (নীচে দেখুন) করবেন না:

  • java.*
  • javax.*
  • sun.*
  • android.*
  • androidx.*
  • com.android.*

অর্থাৎ, তারা:

  • [C-0-1] অ্যান্ড্রয়েড প্ল্যাটফর্মে সর্বজনীনভাবে প্রকাশ করা APIগুলিকে কোনও পদ্ধতি বা শ্রেণি স্বাক্ষর পরিবর্তন করে বা ক্লাস বা শ্রেণি ক্ষেত্রগুলি সরিয়ে দিয়ে সংশোধন করা উচিত নয়।
  • [C-0-2] উপরোক্ত নেমস্পেসগুলিতে API গুলিতে কোনও সর্বজনীনভাবে প্রকাশ করা উপাদান (যেমন ক্লাস বা ইন্টারফেস, বা বিদ্যমান ক্লাস বা ইন্টারফেসে ক্ষেত্র বা পদ্ধতি) বা পরীক্ষা বা সিস্টেম API যোগ করা উচিত নয়। একটি "পাবলিকলি এক্সপোজড এলিমেন্ট" হল যেকোন কনস্ট্রাক্ট যা আপস্ট্রিম অ্যান্ড্রয়েড সোর্স কোডে ব্যবহৃত "@ লুকান" মার্কার দিয়ে সাজানো হয় না।

ডিভাইস বাস্তবায়নকারীরা API-এর অন্তর্নিহিত বাস্তবায়ন পরিবর্তন করতে পারে, কিন্তু এই ধরনের পরিবর্তনগুলি:

  • [C-0-3] কোনো প্রকাশ্য API-এর বর্ণিত আচরণ এবং জাভা-ভাষা স্বাক্ষরকে প্রভাবিত করতে হবে না।
  • [C-0-4] বিজ্ঞাপন বা অন্যথায় ডেভেলপারদের কাছে প্রকাশ করা উচিত নয়।

যাইহোক, ডিভাইস বাস্তবায়নকারীরা স্ট্যান্ডার্ড অ্যান্ড্রয়েড নেমস্পেসের বাইরে কাস্টম API যোগ করতে পারে, কিন্তু কাস্টম APIগুলি:

  • [C-0-5] মালিকানাধীন নামস্থানে বা অন্য সংস্থার উল্লেখ করা উচিত নয়। উদাহরণ স্বরূপ, ডিভাইস বাস্তবায়নকারীরা অবশ্যই com.google.* বা অনুরূপ নামস্থানে API যোগ করবেন না: শুধুমাত্র Google তা করতে পারে। একইভাবে, Google অন্য কোম্পানির নামস্থানে API যোগ করবে না।
  • [C-0-6] অবশ্যই একটি অ্যান্ড্রয়েড শেয়ার্ড লাইব্রেরিতে প্যাকেজ করা উচিত যাতে শুধুমাত্র যে অ্যাপগুলি স্পষ্টভাবে সেগুলি ব্যবহার করে (<uses-library> মেকানিজমের মাধ্যমে) এই ধরনের API-এর বর্ধিত মেমরি ব্যবহার দ্বারা প্রভাবিত হয়।

যদি কোনও ডিভাইস বাস্তবায়নকারী উপরের প্যাকেজ নেমস্পেসগুলির মধ্যে একটিকে উন্নত করার প্রস্তাব দেয় (যেমন একটি বিদ্যমান API-তে দরকারী নতুন কার্যকারিতা যোগ করে, বা একটি নতুন API যোগ করে), বাস্তবায়নকারীকে source.android.com- এ যেতে হবে এবং পরিবর্তনগুলি অবদান রাখার জন্য প্রক্রিয়া শুরু করতে হবে এবং কোড, সেই সাইটের তথ্য অনুযায়ী।

উল্লেখ্য যে উপরের বিধিনিষেধগুলি জাভা প্রোগ্রামিং ভাষায় API-এর নামকরণের জন্য আদর্শ নিয়মের সাথে মিলে যায়; এই বিভাগটি কেবল সেই কনভেনশনগুলিকে শক্তিশালী করা এবং এই সামঞ্জস্যতার সংজ্ঞায় অন্তর্ভুক্তির মাধ্যমে তাদের বাধ্যতামূলক করে তোলার লক্ষ্য রাখে।

3.7। রানটাইম সামঞ্জস্য

ডিভাইস বাস্তবায়ন:

  • [C-0-1] সম্পূর্ণ ডালভিক এক্সিকিউটেবল (DEX) ফরম্যাট এবং ডালভিক বাইটকোড স্পেসিফিকেশন এবং শব্দার্থবিদ্যাকে সমর্থন করতে হবে।

  • [C-0-2] আপস্ট্রিম অ্যান্ড্রয়েড প্ল্যাটফর্ম অনুযায়ী মেমরি বরাদ্দ করতে ডালভিক রানটাইম কনফিগার করতে হবে, এবং নিম্নলিখিত টেবিলের দ্বারা নির্দিষ্ট করা হয়েছে। (স্ক্রীনের আকার এবং পর্দার ঘনত্বের সংজ্ঞার জন্য বিভাগ 7.1.1 দেখুন।)

  • অ্যান্ড্রয়েড রানটাইম (এআরটি), ডালভিক এক্সিকিউটেবল ফর্ম্যাটের রেফারেন্স আপস্ট্রিম বাস্তবায়ন এবং রেফারেন্স বাস্তবায়নের প্যাকেজ ম্যানেজমেন্ট সিস্টেম ব্যবহার করা উচিত।

  • রানটাইমের স্থিতিশীলতা নিশ্চিত করার জন্য এক্সিকিউশন এবং টার্গেট আর্কিটেকচারের বিভিন্ন মোডের অধীনে ফাজ পরীক্ষা চালানো উচিত। অ্যান্ড্রয়েড ওপেন সোর্স প্রকল্প ওয়েবসাইটে JFuzz এবং DexFuzz দেখুন।

মনে রাখবেন যে নীচে নির্দিষ্ট করা মেমরি মানগুলিকে সর্বনিম্ন মান হিসাবে বিবেচনা করা হয় এবং ডিভাইস বাস্তবায়ন অ্যাপ্লিকেশন প্রতি আরও মেমরি বরাদ্দ করতে পারে৷

স্ক্রীন লেআউট পর্দার ঘনত্ব ন্যূনতম অ্যাপ্লিকেশন মেমরি
অ্যান্ড্রয়েড ওয়াচ 120 dpi (ldpi) 32MB
140 ডিপিআই (140 ডিপিআই)
160 dpi (mdpi)
180 ডিপিআই (180 ডিপিআই)
200 ডিপিআই (200 ডিপিআই)
213 dpi (tvdpi)
220 ডিপিআই (220 ডিপিআই) 36MB
240 ডিপিআই (এইচডিপিআই)
280 dpi (280 dpi)
320 dpi (xhdpi) 48MB
360 dpi (360dpi)
400 dpi (400 dpi) 56MB
420 dpi (420 dpi) 64MB
480 dpi (xxhdpi) 88MB
560 dpi (560dpi) 112MB
640 dpi (xxxhdpi) 154MB
ছোট/স্বাভাবিক 120 dpi (ldpi) 32MB
140 ডিপিআই (140 ডিপিআই)
160 dpi (mdpi)
180 ডিপিআই (180 ডিপিআই) 48MB
200 ডিপিআই (200 ডিপিআই)
213 dpi (tvdpi)
220 ডিপিআই (220 ডিপিআই)
240 ডিপিআই (এইচডিপিআই)
280 dpi (280 dpi)
320 dpi (xhdpi) 80MB
360 dpi (360dpi)
400 dpi (400 dpi) 96MB
420 dpi (420 dpi) 112MB
480 dpi (xxhdpi) 128MB
560 dpi (560dpi) 192MB
640 dpi (xxxhdpi) 256MB
বড় 120 dpi (ldpi) 32MB
140 ডিপিআই (140 ডিপিআই) 48MB
160 dpi (mdpi)
180 ডিপিআই (180 ডিপিআই) 80MB
200 ডিপিআই (200 ডিপিআই)
213 dpi (tvdpi)
220 ডিপিআই (220 ডিপিআই)
240 ডিপিআই (এইচডিপিআই)
280 dpi (280 dpi) 96MB
320 dpi (xhdpi) 128MB
360 dpi (360dpi) 160MB
400 dpi (400 dpi) 192MB
420 dpi (420 dpi) 228MB
480 dpi (xxhdpi) 256MB
560 dpi (560dpi) 384MB
640 dpi (xxxhdpi) 512MB
বড় 120 dpi (ldpi) 48MB
140 ডিপিআই (140 ডিপিআই) 80MB
160 dpi (mdpi)
180 ডিপিআই (180 ডিপিআই) 96MB
200 ডিপিআই (200 ডিপিআই)
213 dpi (tvdpi)
220 ডিপিআই (220 ডিপিআই)
240 ডিপিআই (এইচডিপিআই)
280 dpi (280 dpi) 144MB
320 dpi (xhdpi) 192MB
360 dpi (360dpi) 240MB
400 dpi (400 dpi) 288MB
420 dpi (420 dpi) 336MB
480 dpi (xxhdpi) 384MB
560 dpi (560dpi) 576MB
640 dpi (xxxhdpi) 768MB

3.8। ইউজার ইন্টারফেস সামঞ্জস্য

3.8.1। লঞ্চার (হোম স্ক্রীন)

অ্যান্ড্রয়েডে একটি লঞ্চার অ্যাপ্লিকেশন (হোম স্ক্রীন) এবং ডিভাইস লঞ্চার (হোম স্ক্রীন) প্রতিস্থাপনের জন্য তৃতীয় পক্ষের অ্যাপ্লিকেশনগুলির জন্য সমর্থন অন্তর্ভুক্ত রয়েছে।

যদি ডিভাইস বাস্তবায়ন তৃতীয় পক্ষের অ্যাপ্লিকেশনগুলিকে ডিভাইসের হোম স্ক্রীন প্রতিস্থাপন করার অনুমতি দেয়, তারা:

  • [C-1-1] প্ল্যাটফর্ম বৈশিষ্ট্য android.software.home_screen ঘোষণা করতে হবে।
  • [সি -১-২] যখন তৃতীয় পক্ষের অ্যাপ্লিকেশনটি তাদের আইকন সরবরাহ করতে <adaptive-icon> ট্যাগ ব্যবহার করে এবং আইকনগুলি পুনরুদ্ধার করার জন্য PackageManager পদ্ধতিগুলি বলা হয় তখন অবশ্যই AdaptiveIconDrawable অবজেক্টটি ফিরিয়ে দিতে হবে।

যদি ডিভাইস বাস্তবায়নে একটি ডিফল্ট লঞ্চার অন্তর্ভুক্ত থাকে যা শর্টকাটগুলির ইন-অ্যাপ পিনিং সমর্থন করে, তারা:

  • [C-2-1] ShortcutManager.isRequestPinShortcutSupported() এর জন্য true রিপোর্ট করতে হবে।
  • [C-2-2] ShortcutManager.requestPinShortcut() API পদ্ধতির মাধ্যমে অ্যাপস দ্বারা অনুরোধ করা শর্টকাট যোগ করার আগে ব্যবহারকারীকে জিজ্ঞাসা করার জন্য ব্যবহারকারীর সামর্থ্য থাকতে হবে।
  • [সি -২-৩] অ্যাপ্লিকেশন শর্টকাটস পৃষ্ঠায় নথিভুক্ত হিসাবে পিনযুক্ত শর্টকাট এবং গতিশীল এবং স্ট্যাটিক শর্টকাটগুলিকে সমর্থন করতে হবে।

বিপরীতে, যদি ডিভাইস বাস্তবায়নগুলি শর্টকাটগুলির অ্যাপ্লিকেশন পিনিংকে সমর্থন না করে তবে তারা:

যদি ডিভাইস বাস্তবায়নগুলি একটি ডিফল্ট লঞ্চার প্রয়োগ করে যা শর্টকাট ম্যানেজার API এর মাধ্যমে তৃতীয় পক্ষের অ্যাপগুলির দ্বারা প্রদত্ত অতিরিক্ত শর্টকাটগুলিতে দ্রুত অ্যাক্সেস প্রদান করে, তারা:

  • [C-4-1] সমস্ত নথিভুক্ত শর্টকাট বৈশিষ্ট্য (যেমন স্ট্যাটিক এবং ডাইনামিক শর্টকাট, পিনিং শর্টকাট) সমর্থন করতে হবে এবং ShortcutManager API ক্লাসের APIগুলি সম্পূর্ণরূপে বাস্তবায়ন করতে হবে।

যদি ডিভাইস বাস্তবায়নে একটি ডিফল্ট লঞ্চার অ্যাপ অন্তর্ভুক্ত থাকে যা অ্যাপ আইকনগুলির জন্য ব্যাজ দেখায়, তারা:

  • [C-5-1] NotificationChannel.setShowBadge() API পদ্ধতিকে অবশ্যই সম্মান করতে হবে। অন্য কথায়, মানটি true হিসাবে সেট করা থাকলে অ্যাপ আইকনের সাথে সম্পর্কিত একটি ভিজ্যুয়াল সামর্থ্য দেখান এবং অ্যাপের সমস্ত বিজ্ঞপ্তি চ্যানেল মানটিকে false হিসাবে সেট করলে কোনো অ্যাপ আইকন ব্যাজিং স্কিম দেখাবেন না।
  • যখন তৃতীয় পক্ষের অ্যাপ্লিকেশনগুলি মালিকানাধীন API ব্যবহার করে মালিকানা ব্যাজিং স্কিমের সমর্থন নির্দেশ করে তখন তাদের মালিকানাধীন ব্যাজিং স্কিম সহ অ্যাপ আইকন ব্যাজগুলিকে ওভাররাইড করতে পারে, কিন্তু SDK- তে বর্ণিত বিজ্ঞপ্তি ব্যাজ APIগুলির মাধ্যমে প্রদত্ত সংস্থান এবং মানগুলি ব্যবহার করা উচিত, যেমন Notification.Builder.setNumber() এবং Notification.Builder.setBadgeIconType() API।

3.8.2। উইজেট

অ্যান্ড্রয়েড একটি উপাদানের ধরন এবং সংশ্লিষ্ট API এবং জীবনচক্র সংজ্ঞায়িত করে তৃতীয় পক্ষের অ্যাপ উইজেটগুলিকে সমর্থন করে যা অ্যাপ্লিকেশনগুলিকে শেষ ব্যবহারকারীর কাছে একটি "AppWidget" প্রকাশ করতে দেয়।

যদি ডিভাইস বাস্তবায়ন তৃতীয় পক্ষের অ্যাপ উইজেট সমর্থন করে, তারা:

  • [সি -1-1] প্ল্যাটফর্ম বৈশিষ্ট্য android.software.app_widgets এর জন্য সমর্থন ঘোষণা করতে হবে।
  • [C-1-2] অ্যাপউইজেটগুলির জন্য অন্তর্নির্মিত সমর্থন অন্তর্ভুক্ত করতে হবে এবং সরাসরি লঞ্চারের মধ্যে অ্যাপউইজেটগুলি যুক্ত করতে, কনফিগার করতে, দেখতে এবং অপসারণ করতে ব্যবহারকারীর ইন্টারফেস সুবিধাগুলি প্রকাশ করতে হবে৷
  • [C-1-3] স্ট্যান্ডার্ড গ্রিড আকারে 4 x 4 উইজেট রেন্ডার করতে সক্ষম হতে হবে। বিশদগুলির জন্য অ্যান্ড্রয়েড এসডিকে ডকুমেন্টেশনে অ্যাপ উইজেট ডিজাইনগুইডলাইনগুলি দেখুন।
  • লক স্ক্রিনে অ্যাপ্লিকেশন উইজেট সমর্থন করতে পারে।

যদি ডিভাইস বাস্তবায়ন তৃতীয় পক্ষের অ্যাপ উইজেট এবং শর্টকাটগুলির ইন-অ্যাপ পিনিং সমর্থন করে, তারা:

  • [C-2-1] AppWidgetManager.html.isRequestPinAppWidgetSupported() এর জন্য true রিপোর্ট করতে হবে।
  • [C-2-2] AppWidgetManager.requestPinAppWidget() API পদ্ধতির মাধ্যমে অ্যাপস দ্বারা অনুরোধ করা শর্টকাট যোগ করার আগে ব্যবহারকারীকে জিজ্ঞাসা করার জন্য ব্যবহারকারীর সামর্থ্য থাকতে হবে।

3.8.3। বিজ্ঞপ্তি

অ্যান্ড্রয়েডের মধ্যে Notification এবং NotificationManager এপিআই রয়েছে যা তৃতীয় পক্ষের অ্যাপ ডেভেলপারদেরকে উল্লেখযোগ্য ইভেন্ট সম্পর্কে ব্যবহারকারীদের অবহিত করতে এবং ডিভাইসের হার্ডওয়্যার উপাদান (যেমন শব্দ, কম্পন এবং আলো) এবং সফ্টওয়্যার বৈশিষ্ট্যগুলি (যেমন নোটিফিকেশন শেড, সিস্টেম বার) ব্যবহার করে ব্যবহারকারীদের মনোযোগ আকর্ষণ করতে দেয়। .

3.8.3.1। বিজ্ঞপ্তির উপস্থাপনা

যদি ডিভাইস বাস্তবায়নগুলি তৃতীয় পক্ষের অ্যাপ্লিকেশনগুলিকে উল্লেখযোগ্য ইভেন্টগুলির ব্যবহারকারীদের অবহিত করার অনুমতি দেয় তবে তারা:

  • [C-1-1] SDK ডকুমেন্টেশনে বর্ণিত হার্ডওয়্যার বৈশিষ্ট্যগুলি ব্যবহার করে এবং ডিভাইস বাস্তবায়ন হার্ডওয়্যারের সাথে যতটা সম্ভব বিজ্ঞপ্তিগুলিকে সমর্থন করতে হবে। উদাহরণস্বরূপ, যদি একটি ডিভাইস বাস্তবায়নে একটি ভাইব্রেটর অন্তর্ভুক্ত থাকে, তবে এটি অবশ্যই ভাইব্রেশন APIগুলি সঠিকভাবে প্রয়োগ করতে হবে। যদি একটি ডিভাইস বাস্তবায়নে হার্ডওয়্যারের অভাব থাকে, তাহলে সংশ্লিষ্ট APIগুলি অবশ্যই নো-অপস হিসাবে প্রয়োগ করা উচিত। এই আচরণটি অধ্যায় 7 এ আরও বিশদ রয়েছে।
  • [সি -১-২] এপিআইগুলিতে বা স্ট্যাটাস/সিস্টেম বার আইকন স্টাইল গাইডে প্রদত্ত সমস্ত সংস্থান (আইকন, অ্যানিমেশন ফাইল ইত্যাদি) সঠিকভাবে রেন্ডার করতে হবে, যদিও তারা এর চেয়ে বিজ্ঞপ্তিগুলির জন্য বিকল্প ব্যবহারকারীর অভিজ্ঞতা সরবরাহ করতে পারে রেফারেন্স অ্যান্ড্রয়েড ওপেন সোর্স বাস্তবায়ন দ্বারা সরবরাহ করা।
  • [C-1-3] আপডেট, অপসারণ এবং গোষ্ঠী বিজ্ঞপ্তিগুলির জন্য API- এর জন্য বর্ণিত আচরণগুলিকে অবশ্যই সম্মান এবং যথাযথভাবে প্রয়োগ করতে হবে।
  • [C-1-4] SDK-এ নথিভুক্ত NotificationChannel API-এর সম্পূর্ণ আচরণ অবশ্যই প্রদান করতে হবে।
  • [C-1-5] প্রতিটি চ্যানেল এবং অ্যাপ প্যাকেজ স্তরের জন্য একটি নির্দিষ্ট তৃতীয় পক্ষের অ্যাপের বিজ্ঞপ্তি ব্লক এবং সংশোধন করার জন্য অবশ্যই ব্যবহারকারীর সামর্থ্য প্রদান করতে হবে।
  • [C-1-6] মুছে ফেলা বিজ্ঞপ্তি চ্যানেলগুলি প্রদর্শন করার জন্য একটি ব্যবহারকারীর সামর্থ্য প্রদান করতে হবে।
  • [সি -1-7] অতিরিক্ত ব্যবহারকারীর ইন্টারঅ্যাকশন ছাড়াই বিজ্ঞপ্তি পাঠ্যের পাশাপাশি বিজ্ঞপ্তি.ম্যাসেজিং স্টাইলের মাধ্যমে প্রদত্ত সমস্ত সংস্থান (চিত্র, স্টিকার, আইকন ইত্যাদি) সঠিকভাবে রেন্ডার করতে হবে। উদাহরণস্বরূপ, সেটগ্রুপ কনভার্সেশনের মাধ্যমে সেট করা একটি গ্রুপ কথোপকথনে অ্যান্ড্রয়েড.এপ.পারসনের মাধ্যমে প্রদত্ত আইকন সহ সমস্ত সংস্থান অবশ্যই প্রদর্শন করতে হবে।
  • [সি-এসআর] প্রতিটি চ্যানেল প্রতি নির্দিষ্ট তৃতীয় পক্ষের অ্যাপের বিজ্ঞপ্তি এবং অ্যাপ্লিকেশন প্যাকেজ স্তরটি ব্লক করার জন্য স্বয়ংক্রিয়ভাবে কোনও ব্যবহারকারীর সাশ্রয়ী মূল্যের পৃষ্ঠের জন্য দৃ strongly ়ভাবে সুপারিশ করা হয় এবং ব্যবহারকারী একাধিকবার এই বিজ্ঞপ্তিটি খারিজ করে দেওয়ার পরে।
  • সমৃদ্ধ বিজ্ঞপ্তি সমর্থন করা উচিত.
  • কিছু উচ্চ অগ্রাধিকার বিজ্ঞপ্তি হেড-আপ বিজ্ঞপ্তি হিসাবে উপস্থাপন করা উচিত।
  • বিজ্ঞপ্তি স্নুজ করার জন্য একটি ব্যবহারকারীর সামর্থ্য থাকা উচিত।
  • থার্ড-পার্টি অ্যাপগুলি যখন ড্রাইভারের বিভ্রান্তির মতো নিরাপত্তার সমস্যাগুলি কমাতে উল্লেখযোগ্য ইভেন্টগুলির বিষয়ে ব্যবহারকারীদের অবহিত করতে পারে তখন শুধুমাত্র দৃশ্যমানতা এবং সময় পরিচালনা করতে পারে৷

অ্যান্ড্রয়েড 11 কথোপকথনের বিজ্ঞপ্তিগুলির জন্য সমর্থন প্রবর্তন করে, যা এমন বিজ্ঞপ্তিগুলি যা মেসেজিং স্টাইল ব্যবহার করে এবং একটি প্রকাশিত লোক শর্টকাট আইডি সরবরাহ করে।

ডিভাইস বাস্তবায়ন:

  • [সি-এসআর] চলমান অগ্রভাগের পরিষেবা বিজ্ঞপ্তি এবং গুরুত্ব ব্যতীত নন কথোপকথনের বিজ্ঞপ্তিগুলির আগে conversation notifications গ্রুপ এবং প্রদর্শন করার জন্য দৃ strongly ়ভাবে সুপারিশ করা হয় importance:high বিজ্ঞপ্তিগুলি।

যদি ডিভাইস বাস্তবায়নগুলি conversation notifications সমর্থন করে এবং অ্যাপ্লিকেশনটি bubbles জন্য প্রয়োজনীয় ডেটা সরবরাহ করে তবে তারা:

  • [সি-এসআর] এই কথোপকথনটিকে বুদ্বুদ হিসাবে প্রদর্শন করার জন্য দৃ strongly ়ভাবে সুপারিশ করা হয়। এওএসপি বাস্তবায়ন ডিফল্ট সিস্টেম ইউআই, সেটিংস এবং লঞ্চারের সাথে এই প্রয়োজনীয়তাগুলি পূরণ করে।

যদি ডিভাইস বাস্তবায়ন সমৃদ্ধ বিজ্ঞপ্তি সমর্থন করে, তারা:

  • [C-2-1] উপস্থাপিত সংস্থান উপাদানগুলির জন্য Notification.Style API ক্লাস এবং এর সাবক্লাসগুলির মাধ্যমে প্রদত্ত সঠিক সংস্থানগুলি অবশ্যই ব্যবহার করতে হবে৷
  • Notification.Style API ক্লাস এবং এর সাবক্লাসে সংজ্ঞায়িত প্রতিটি সংস্থান উপাদান (যেমন আইকন, শিরোনাম এবং সারাংশ পাঠ) উপস্থাপন করা উচিত।

যদি ডিভাইস বাস্তবায়ন হেড-আপ বিজ্ঞপ্তি সমর্থন করে: তারা:

  • [C-3-1] যখন হেড-আপ নোটিফিকেশন উপস্থাপন করা হয় তখন Notification.Builder API ক্লাসে বর্ণিত হেড-আপ নোটিফিকেশন ভিউ এবং রিসোর্স ব্যবহার করতে হবে।
  • [সি -৩-২] অবশ্যই এসডিকে বর্ণিত অতিরিক্ত ব্যবহারকারীর মিথস্ক্রিয়া ছাড়াই বিজ্ঞপ্তি সামগ্রীর সাথে Notification.Builder.addAction() মাধ্যমে প্রদত্ত ক্রিয়াগুলি প্রদর্শন করতে হবে।
3.8.3.2। বিজ্ঞপ্তি শ্রোতা পরিষেবা

Android-এ NotificationListenerService API গুলি অন্তর্ভুক্ত রয়েছে যা অ্যাপগুলিকে (একবার স্পষ্টভাবে ব্যবহারকারী দ্বারা সক্ষম করে) সমস্ত বিজ্ঞপ্তির একটি অনুলিপি পাওয়ার অনুমতি দেয় যখন সেগুলি পোস্ট বা আপডেট করা হয়।

ডিভাইস বাস্তবায়ন:

  • [C-0-1] বিজ্ঞপ্তি অবজেক্টের সাথে সংযুক্ত যেকোনো এবং সমস্ত মেটাডেটা সহ এই ধরনের সমস্ত ইনস্টল করা এবং ব্যবহারকারী-সক্ষম শ্রোতা পরিষেবাগুলিতে সঠিকভাবে এবং অবিলম্বে বিজ্ঞপ্তিগুলি আপডেট করতে হবে।
  • [C-0-2] snoozeNotification() API কলকে অবশ্যই সম্মান করতে হবে, এবং বিজ্ঞপ্তিটি খারিজ করতে হবে এবং API কলে সেট করা স্নুজ সময়কালের পরে একটি কলব্যাক করতে হবে।

যদি ডিভাইস বাস্তবায়নে ব্যবহারকারীদের নোটিফিকেশন স্নুজ করার সামর্থ্য থাকে, তারা:

  • [C-1-1] NotificationListenerService.getSnoozedNotifications() এর মতো স্ট্যান্ডার্ড API-এর মাধ্যমে স্নুজ করা বিজ্ঞপ্তির স্থিতি অবশ্যই সঠিকভাবে প্রতিফলিত করতে হবে।
  • [C-1-2] প্রতিটি ইনস্টল করা থার্ড-পার্টি অ্যাপের থেকে নোটিফিকেশন স্নুজ করার জন্য এই ব্যবহারকারীর সামর্থ্য অবশ্যই উপলব্ধ করা উচিত, যদি না তারা ক্রমাগত/ফোরগ্রাউন্ড পরিষেবা থেকে না হয়।
3.8.3.3। DND (বিরক্ত করবেন না)

যদি ডিভাইস বাস্তবায়ন DND বৈশিষ্ট্য সমর্থন করে, তারা:

  • [সি -১-১] অবশ্যই, যখন ডিভাইস বাস্তবায়ন ব্যবহারকারীকে ডিএনডি নীতি কনফিগারেশন অ্যাক্সেস করার জন্য তৃতীয় পক্ষের অ্যাপ্লিকেশনগুলি মঞ্জুর বা অস্বীকার করার জন্য একটি উপায় সরবরাহ করেছে, ব্যবহারকারী-তৈরি এবং প্রাকের পাশাপাশি অ্যাপ্লিকেশন দ্বারা নির্মিত স্বয়ংক্রিয় ডিএনডি বিধিগুলি প্রদর্শন করুন - সংজ্ঞায়িত নিয়ম।
  • [C-1-3] NotificationManager.Policy বরাবর পাস suppressedVisualEffects মানগুলিকে অবশ্যই সম্মান করতে হবে এবং যদি কোনও অ্যাপ SUPPRESSED_EFFECT_SCREEN_OFF বা SUPPRESSED_EFFECT_SCREEN_ON ফ্ল্যাগ সেট করে থাকে, তাহলে এটি ব্যবহারকারীকে নির্দেশ করবে যে পুরুষের প্রভাবগুলিকে চাপে রাখতে হবে।

অ্যান্ড্রয়েড এপিআই অন্তর্ভুক্ত করে যা বিকাশকারীদের তাদের অ্যাপ্লিকেশনগুলিতে অনুসন্ধান অন্তর্ভুক্ত করতে এবং তাদের অ্যাপ্লিকেশনের ডেটা বিশ্বব্যাপী সিস্টেম অনুসন্ধানে প্রকাশ করতে দেয়৷ সাধারণভাবে বলতে গেলে, এই কার্যকারিতা একটি একক, সিস্টেম-ওয়াইড ইউজার ইন্টারফেস নিয়ে গঠিত যা ব্যবহারকারীদের ক্যোয়ারী প্রবেশ করতে দেয়, ব্যবহারকারীদের টাইপ হিসাবে সাজেশন প্রদর্শন করে এবং ফলাফল প্রদর্শন করে। অ্যান্ড্রয়েড এপিআইগুলি ডেভেলপারদের তাদের নিজস্ব অ্যাপের মধ্যে অনুসন্ধান প্রদান করতে এই ইন্টারফেসটি পুনরায় ব্যবহার করার অনুমতি দেয় এবং বিকাশকারীদের সাধারণ বিশ্বব্যাপী অনুসন্ধান ব্যবহারকারী ইন্টারফেসে ফলাফল সরবরাহ করার অনুমতি দেয়।

  • অ্যান্ড্রয়েড ডিভাইস বাস্তবায়নে বিশ্বব্যাপী অনুসন্ধান অন্তর্ভুক্ত করা উচিত, একটি একক, ভাগ করা, সিস্টেম-ওয়াইড অনুসন্ধান ব্যবহারকারী ইন্টারফেস ব্যবহারকারীর ইনপুটের প্রতিক্রিয়ায় রিয়েল-টাইম পরামর্শ দিতে সক্ষম।

যদি ডিভাইস বাস্তবায়ন বিশ্বব্যাপী অনুসন্ধান ইন্টারফেস বাস্তবায়ন করে, তারা:

  • [C-1-1] এমন APIs প্রয়োগ করতে হবে যা তৃতীয় পক্ষের অ্যাপ্লিকেশনগুলিকে সার্চ বক্সে পরামর্শ যোগ করার অনুমতি দেয় যখন এটি গ্লোবাল সার্চ মোডে চালানো হয়।

যদি কোনো তৃতীয় পক্ষের অ্যাপ্লিকেশন ইনস্টল করা না থাকে যা বিশ্বব্যাপী অনুসন্ধান ব্যবহার করে:

  • ডিফল্ট আচরণ ওয়েব সার্চ ইঞ্জিন ফলাফল এবং পরামর্শ প্রদর্শন করা উচিত.

ডিভাইসে অ্যাসিস্ট্যান্টের সাথে বর্তমান প্রেক্ষাপটের কতটা তথ্য শেয়ার করা হবে তা বেছে নেওয়ার জন্য অ্যাপ্লিকেশানগুলিকে অনুমতি দেওয়ার জন্য Android-এ অ্যাসিস্ট APIগুলিও অন্তর্ভুক্ত রয়েছে৷

যদি ডিভাইস বাস্তবায়ন সহায়তা অ্যাকশন সমর্থন করে, তারা:

  • [C-2-1] প্রসঙ্গটি ভাগ করা হলে শেষ ব্যবহারকারীকে স্পষ্টভাবে নির্দেশ করতে হবে, যেকোনো একটি দ্বারা:
    • প্রতিবার অ্যাসিস্ট অ্যাপ্লিকেশানটি প্রসঙ্গ অ্যাক্সেস করে, স্ক্রিনের প্রান্তগুলির চারপাশে একটি সাদা আলো প্রদর্শন করে যা Android ওপেন সোর্স প্রকল্প বাস্তবায়নের সময়কাল এবং উজ্জ্বলতা পূরণ করে বা অতিক্রম করে৷
    • প্রি-ইনস্টল করা অ্যাসিস্ট অ্যাপের জন্য, ডিফল্ট ভয়েস ইনপুট এবং অ্যাসিস্ট্যান্ট অ্যাপ সেটিংস মেনু থেকে দুইটিরও কম নেভিগেশনের দূরত্বে ব্যবহারকারীর সামর্থ্য প্রদান করা এবং শুধুমাত্র প্রসঙ্গ শেয়ার করা যখন সহায়ক অ্যাপটি হটওয়ার্ড বা অ্যাসিস্ট নেভিগেশন কী ইনপুটের মাধ্যমে ব্যবহারকারীর দ্বারা স্পষ্টভাবে আহ্বান করা হয়।
  • [C-2-2] অনুচ্ছেদ 7.2.3 এ বর্ণিত সহায়ক অ্যাপটি চালু করার জন্য মনোনীত ইন্টারঅ্যাকশন অবশ্যই ব্যবহারকারী-নির্বাচিত সহায়ক অ্যাপটি চালু করতে হবে, অন্য কথায় যে অ্যাপটি VoiceInteractionService প্রয়োগ করে, বা ACTION_ASSIST অভিপ্রায় পরিচালনা করে এমন একটি কার্যকলাপ।

3.8.5। সতর্কতা এবং টোস্ট

সংক্ষিপ্ত সময়ের পরে অদৃশ্য হয়ে যাওয়া শেষ ব্যবহারকারীর কাছে সংক্ষিপ্ত নন-মোডাল স্ট্রিংগুলি প্রদর্শন করতে অ্যাপ্লিকেশনগুলি Toast API ব্যবহার করতে পারে এবং অন্যান্য অ্যাপের উপর ওভারলে হিসাবে সতর্কতা উইন্ডোগুলি প্রদর্শন করতে TYPE_APPLICATION_OVERLAY উইন্ডো টাইপ API ব্যবহার করতে পারে৷

যদি ডিভাইস বাস্তবায়নে একটি স্ক্রিন বা ভিডিও আউটপুট অন্তর্ভুক্ত থাকে, তারা:

  • [C-1-1] TYPE_APPLICATION_OVERLAY ব্যবহার করে এমন সতর্কতা উইন্ডোগুলি প্রদর্শন করা থেকে একটি অ্যাপকে ব্লক করার জন্য ব্যবহারকারীর সামর্থ্য প্রদান করতে হবে। AOSP বাস্তবায়ন বিজ্ঞপ্তি ছায়ায় নিয়ন্ত্রণ থাকার মাধ্যমে এই প্রয়োজনীয়তা পূরণ করে।

  • [C-1-2] টোস্ট এপিআইকে সম্মান করতে হবে এবং কিছু উচ্চ দৃশ্যমান পদ্ধতিতে শেষ ব্যবহারকারীদের কাছে অ্যাপ্লিকেশন থেকে টোস্ট প্রদর্শন করতে হবে।

3.8.6। থিম

অ্যান্ড্রয়েড একটি সম্পূর্ণ অ্যাক্টিভিটি বা অ্যাপ্লিকেশান জুড়ে শৈলী প্রয়োগ করার জন্য অ্যাপ্লিকেশনগুলির জন্য একটি প্রক্রিয়া হিসাবে "থিম" সরবরাহ করে।

অ্যাপ্লিকেশান ডেভেলপাররা যদি Android SDK দ্বারা সংজ্ঞায়িত Holo থিমের চেহারা এবং অনুভূতির সাথে মেলে তা ব্যবহার করার জন্য Android-এ একটি "Holo" এবং "ম্যাটেরিয়াল" থিম পরিবার অন্তর্ভুক্ত রয়েছে।

যদি ডিভাইস বাস্তবায়নে একটি স্ক্রিন বা ভিডিও আউটপুট অন্তর্ভুক্ত থাকে, তারা:

  • [C-1-1] অ্যাপ্লিকেশনের সংস্পর্শে আসা Holo থিম বৈশিষ্ট্যগুলির কোনও পরিবর্তন করা উচিত নয়।
  • [C-1-2] অবশ্যই "ম্যাটেরিয়াল" থিম ফ্যামিলিকে সমর্থন করতে হবে এবং মেটেরিয়াল থিমের কোনো অ্যাট্রিবিউট বা অ্যাপ্লিকেশানের সংস্পর্শে থাকা তাদের সম্পদের কোনো পরিবর্তন করা উচিত নয়।
  • [সি -১-৩] হয় রোবোটো সমর্থন করে এমন ভাষাগুলির জন্য "সানস-সেরিফ" ফন্ট পরিবারকে রোবোটো সংস্করণ ২.x এ সেট করতে হবে, বা "সানস-সেরিফ" ফন্ট পরিবারের জন্য ব্যবহৃত ফন্টটি পরিবর্তন করার জন্য কোনও ব্যবহারকারীর সাশ্রয়ীতা সরবরাহ করতে হবে রোবোটো সমর্থন করে এমন ভাষাগুলির জন্য রোবোটো সংস্করণ 2.x।

অ্যান্ড্রয়েডে একটি "ডিভাইস ডিফল্ট" থিম ফ্যামিলিও রয়েছে যা অ্যাপ্লিকেশন ডেভেলপারদের ব্যবহার করার জন্য সংজ্ঞায়িত শৈলীগুলির একটি সেট হিসাবে তারা যদি ডিভাইস বাস্তবায়নকারীর দ্বারা সংজ্ঞায়িত ডিভাইস থিমের চেহারা এবং অনুভূতির সাথে মেলে।

অ্যান্ড্রয়েড ট্রান্সলুসেন্ট সিস্টেম বার সহ একটি বৈকল্পিক থিম সমর্থন করে, যা অ্যাপ্লিকেশন বিকাশকারীদের তাদের অ্যাপ সামগ্রী দিয়ে স্ট্যাটাস এবং নেভিগেশন বারের পিছনের জায়গাটি পূরণ করতে দেয়। এই কনফিগারেশনে একটি সামঞ্জস্যপূর্ণ বিকাশকারীর অভিজ্ঞতা সক্ষম করতে, বিভিন্ন ডিভাইস বাস্তবায়নে স্ট্যাটাস বার আইকন শৈলী বজায় রাখা গুরুত্বপূর্ণ।

যদি ডিভাইস বাস্তবায়নে একটি সিস্টেম স্ট্যাটাস বার অন্তর্ভুক্ত থাকে, তারা:

  • [C-2-1] সিস্টেম স্ট্যাটাস আইকন (যেমন সিগন্যাল শক্তি এবং ব্যাটারি স্তর) এবং সিস্টেম দ্বারা জারি করা বিজ্ঞপ্তিগুলির জন্য অবশ্যই সাদা ব্যবহার করতে হবে, যদি না আইকনটি একটি সমস্যাযুক্ত স্থিতি নির্দেশ করে বা একটি অ্যাপ SYSTEM_UI_FLAG_LIGHT_STATUS_BAR পতাকা ব্যবহার করে একটি হালকা স্ট্যাটাস বার অনুরোধ করে .
  • [C-2-2] অ্যান্ড্রয়েড ডিভাইস বাস্তবায়নে যখন কোনো অ্যাপ হালকা স্ট্যাটাস বারের অনুরোধ করে তখন সিস্টেম স্ট্যাটাস আইকনগুলির রঙ অবশ্যই কালোতে পরিবর্তন করতে হবে (বিশদ বিবরণের জন্য, R.style পড়ুন)।

3.8.7। লাইভ ওয়ালপেপার

অ্যান্ড্রয়েড একটি উপাদানের প্রকার এবং সংশ্লিষ্ট API এবং জীবনচক্র সংজ্ঞায়িত করে যা অ্যাপ্লিকেশনগুলিকে শেষ ব্যবহারকারীর কাছে এক বা একাধিক "লাইভ ওয়ালপেপার" প্রকাশ করতে দেয়। লাইভ ওয়ালপেপার হল অ্যানিমেশন, প্যাটার্ন বা সীমিত ইনপুট ক্ষমতা সহ অনুরূপ ছবি যা অন্যান্য অ্যাপ্লিকেশনের পিছনে ওয়ালপেপার হিসাবে প্রদর্শিত হয়।

হার্ডওয়্যার নির্ভরযোগ্যভাবে লাইভ ওয়ালপেপার চালাতে সক্ষম বলে বিবেচিত হয় যদি এটি সমস্ত লাইভ ওয়ালপেপার চালাতে পারে, কার্যকারিতার কোন সীমাবদ্ধতা ছাড়াই, যুক্তিসঙ্গত ফ্রেম হারে অন্যান্য অ্যাপ্লিকেশনের উপর কোন বিরূপ প্রভাব ছাড়াই। যদি হার্ডওয়্যারের সীমাবদ্ধতার কারণে ওয়ালপেপার এবং/অথবা অ্যাপ্লিকেশনগুলি ক্র্যাশ, ত্রুটিপূর্ণ, অত্যধিক CPU বা ব্যাটারি শক্তি খরচ করে, বা অগ্রহণযোগ্যভাবে কম ফ্রেম রেট চালায়, তাহলে হার্ডওয়্যারটি লাইভ ওয়ালপেপার চালানোর জন্য অক্ষম বলে বিবেচিত হয়। উদাহরণ হিসেবে, কিছু লাইভ ওয়ালপেপার তাদের বিষয়বস্তু রেন্ডার করতে OpenGL 2.0 বা 3.x প্রসঙ্গ ব্যবহার করতে পারে। লাইভ ওয়ালপেপার এমন হার্ডওয়্যারে নির্ভরযোগ্যভাবে চলবে না যা একাধিক OpenGL প্রসঙ্গ সমর্থন করে না কারণ একটি OpenGL প্রসঙ্গের লাইভ ওয়ালপেপার ব্যবহার অন্য অ্যাপ্লিকেশনগুলির সাথে বিরোধ করতে পারে যেগুলি একটি OpenGL প্রসঙ্গ ব্যবহার করে।

  • উপরে বর্ণিত হিসাবে নির্ভরযোগ্যভাবে লাইভ ওয়ালপেপার চালাতে সক্ষম ডিভাইস বাস্তবায়ন লাইভ ওয়ালপেপার প্রয়োগ করা উচিত।

যদি ডিভাইস বাস্তবায়ন লাইভ ওয়ালপেপার প্রয়োগ করে, তারা:

  • [C-1-1] প্ল্যাটফর্ম বৈশিষ্ট্য পতাকা android.software.live_wallpaper রিপোর্ট করতে হবে।

3.8.8। কার্যকলাপ স্যুইচিং

আপস্ট্রিম অ্যান্ড্রয়েড সোর্স কোডের মধ্যে রয়েছে ওভারভিউ স্ক্রিন , ব্যবহারকারী সর্বশেষ অ্যাপ্লিকেশনটি ছেড়ে যাওয়ার মুহূর্তে অ্যাপ্লিকেশনটির গ্রাফিকাল অবস্থার একটি থাম্বনেইল চিত্র ব্যবহার করে টাস্ক স্যুইচিং এবং প্রদর্শনের জন্য একটি সিস্টেম-স্তরের ব্যবহারকারী ইন্টারফেস।

সাম্প্রতিক ফাংশন নেভিগেশন কী সহ ডিভাইস বাস্তবায়ন বিভাগ 7.2.3 এ বিস্তারিতভাবে ইন্টারফেস পরিবর্তন করতে পারে।

যদি 7.2.3 বিভাগে বিশদ বিবরণ অনুযায়ী সাম্প্রতিক ফাংশন নেভিগেশন কী সহ ডিভাইস বাস্তবায়ন ইন্টারফেস পরিবর্তন করে, তারা:

  • [সি -1-1] অবশ্যই কমপক্ষে 7 টি প্রদর্শিত ক্রিয়াকলাপ সমর্থন করতে হবে।
  • কমপক্ষে একবারে 4টি কার্যকলাপের শিরোনাম প্রদর্শন করা উচিত।
  • [C-1-2] অবশ্যই স্ক্রিন পিনিং আচরণ বাস্তবায়ন করতে হবে এবং বৈশিষ্ট্যটি টগল করার জন্য ব্যবহারকারীকে একটি সেটিংস মেনু প্রদান করতে হবে।
  • সাম্প্রতিক সময়ে হাইলাইট রঙ, আইকন, স্ক্রীন শিরোনাম প্রদর্শন করা উচিত।
  • একটি ক্লোজিং অ্যাফোরডেন্স ("x") প্রদর্শন করা উচিত তবে ব্যবহারকারী স্ক্রীনের সাথে ইন্টারঅ্যাক্ট না করা পর্যন্ত এটি বিলম্বিত করতে পারে৷
  • পূর্ববর্তী ক্রিয়াকলাপে সহজেই স্যুইচ করতে একটি শর্টকাট প্রয়োগ করা উচিত।
  • সাম্প্রতিক ফাংশন কীটি দুবার ট্যাপ করা হলে দুটি সাম্প্রতিক ব্যবহৃত অ্যাপের মধ্যে দ্রুত-সুইচ অ্যাকশন ট্রিগার করা উচিত।
  • স্প্লিট-স্ক্রিন মাল্টিউইন্ডো-মোড ট্রিগার করা উচিত, যদি সমর্থিত হয়, যখন সাম্প্রতিক ফাংশন কী দীর্ঘক্ষণ চাপা থাকে।
  • একত্রে চলে এমন একটি গোষ্ঠী হিসাবে অধিভুক্ত সাম্প্রতিকগুলি প্রদর্শন করতে পারে৷
  • [এসআর] ওভারভিউ স্ক্রিনের জন্য উজানের অ্যান্ড্রয়েড ইউজার ইন্টারফেস (বা অনুরূপ থাম্বনেইল-ভিত্তিক ইন্টারফেস) ব্যবহার করার জন্য দৃ strongly ়ভাবে সুপারিশ করা হয়।

3.8.9। ইনপুট ম্যানেজমেন্ট

অ্যান্ড্রয়েড ইনপুট ম্যানেজমেন্টের জন্য সমর্থন এবং তৃতীয় পক্ষের ইনপুট পদ্ধতি সম্পাদকদের জন্য সমর্থন অন্তর্ভুক্ত করে।

যদি ডিভাইস বাস্তবায়ন ব্যবহারকারীদের ডিভাইসে তৃতীয় পক্ষের ইনপুট পদ্ধতি ব্যবহার করার অনুমতি দেয়, তারা:

  • [C-1-1] প্ল্যাটফর্ম বৈশিষ্ট্য android.software.input_methods ঘোষণা করতে হবে এবং Android SDK ডকুমেন্টেশনে সংজ্ঞায়িত IME API সমর্থন করতে হবে।

3.8.10। লক স্ক্রীন মিডিয়া কন্ট্রোল

রিমোট কন্ট্রোল ক্লায়েন্ট API মিডিয়া নোটিফিকেশন টেমপ্লেটের পক্ষে Android 5.0 থেকে বাতিল করা হয়েছে যা মিডিয়া অ্যাপ্লিকেশনগুলিকে লক স্ক্রিনে প্রদর্শিত প্লেব্যাক নিয়ন্ত্রণগুলির সাথে একীভূত করার অনুমতি দেয়৷

3.8.11। স্ক্রিন সেভার (আগে ড্রিমস)

সেটিংসের জন্য বিভাগ 3.2.3.5 দেখুন দেখুন স্ক্রিন সেভারগুলি কংগ্রেজ করার উদ্দেশ্যে।

3.8.12। অবস্থান

যদি ডিভাইস বাস্তবায়নে একটি হার্ডওয়্যার সেন্সর (যেমন জিপিএস) অন্তর্ভুক্ত থাকে যা অবস্থানের স্থানাঙ্ক সরবরাহ করতে সক্ষম, তারা

3.8.13। ইউনিকোড এবং ফন্ট

ইউনিকোড 10.0- এ সংজ্ঞায়িত ইমোজি অক্ষরগুলির জন্য Android সমর্থন অন্তর্ভুক্ত করে।

যদি ডিভাইস বাস্তবায়নে একটি স্ক্রিন বা ভিডিও আউটপুট অন্তর্ভুক্ত থাকে, তারা:

  • [C-1-1] এই ইমোজি অক্ষরগুলিকে রঙিন গ্লিফে রেন্ডার করতে সক্ষম হতে হবে৷
  • [C-1-2] এর জন্য সমর্থন অন্তর্ভুক্ত করা আবশ্যক:
    • বিভিন্ন ওজন সহ রোবোটো 2 ফন্ট- সান-সেরিফ-থিন, সান-সেরিফ-লাইট, সান-সেরিফ-মাঝারি, সান-সেরিফ-ব্ল্যাক, সান-সেরিফ-কন্ডেন্সড, সান-সেরিফ-কন্ডেন্সড-লাইট-এ উপলব্ধ ভাষার জন্য যন্ত্র.
    • ল্যাটিন, গ্রীক, এবং সিরিলিক এর সম্পূর্ণ ইউনিকোড 7.0 কভারেজ, ল্যাটিন বর্ধিত A, B, C, এবং D রেঞ্জ এবং ইউনিকোড 7.0 এর মুদ্রা প্রতীক ব্লকের সমস্ত গ্লিফ সহ।
  • ইউনিকোড টেকনিক্যাল রিপোর্ট #51- এ উল্লিখিত স্কিন টোন এবং বিভিন্ন পারিবারিক ইমোজি সমর্থন করা উচিত।

যদি ডিভাইস বাস্তবায়নে একটি IME অন্তর্ভুক্ত থাকে, তারা:

  • এই ইমোজি অক্ষরের জন্য ব্যবহারকারীকে একটি ইনপুট পদ্ধতি প্রদান করা উচিত।

অ্যান্ড্রয়েডে মিয়ানমার ফন্টগুলি রেন্ডার করতে সহায়তা অন্তর্ভুক্ত রয়েছে। মায়ানমারের বেশ কয়েকটি নন-ইউনিকোডের অনুগত ফন্ট রয়েছে, যা সাধারণত মায়ানমার ভাষা রেন্ডার করার জন্য "জাওজিআই" নামে পরিচিত।

যদি ডিভাইস বাস্তবায়নে বার্মিজের জন্য সমর্থন অন্তর্ভুক্ত থাকে তবে তারা:

* [C-2-1] MUST render text with Unicode compliant font as default;
  non-Unicode compliant font MUST NOT be set as default font unless the user
  chooses it in the language picker.
* [C-2-2] MUST support a Unicode font and a non-Unicode compliant font if a
  non-Unicode compliant font is supported on the device.  Non-Unicode
  compliant font MUST NOT remove or overwrite the Unicode font.
* [C-2-3] MUST render text with non-Unicode compliant font ONLY IF a
  language code with [script code Qaag](
  http://unicode.org/reports/tr35/#unicode_script_subtag_validity) is
  specified (e.g. my-Qaag). No other ISO language or region codes (whether
  assigned, unassigned, or reserved) can be used to refer to non-Unicode
  compliant font for Myanmar. App developers and web page authors can
  specify my-Qaag as the designated language code as they would for any
  other language.

3.8.14। মাল্টি-উইন্ডোজ

যদি ডিভাইস বাস্তবায়নের একই সময়ে একাধিক কার্যকলাপ প্রদর্শন করার ক্ষমতা থাকে, তারা:

  • [C-1-1] Android SDK মাল্টি-উইন্ডো মোড সমর্থন ডকুমেন্টেশনে বর্ণিত অ্যাপ্লিকেশন আচরণ এবং API গুলি অনুসারে এই জাতীয় মাল্টি-উইন্ডো মোড(গুলি) প্রয়োগ করতে হবে এবং নিম্নলিখিত প্রয়োজনীয়তাগুলি পূরণ করতে হবে:
  • [সি -১-২] অবশ্যই android:resizeableActivity এই এসডিকে বর্ণিত হিসাবে AndroidManifest.xml ফাইলের একটি অ্যাপ্লিকেশন দ্বারা সেট করা রেজাইজেব্ল্যাটিভিটিটি।
  • [সি -১-৩] যদি স্ক্রিনের উচ্চতা 440 ডিপি এর চেয়ে কম হয় এবং স্ক্রিনের প্রস্থ 440 ডিপি এর চেয়ে কম হয় তবে অবশ্যই স্প্লিট-স্ক্রিন বা ফ্রিফর্ম মোড অফার করা উচিত নয়।
  • [সি -1-4] কোনও ক্রিয়াকলাপ চিত্র-ইন-চিত্র ব্যতীত মাল্টি-উইন্ডো মোডে 220 ডিপির চেয়ে ছোট আকারে আকার পরিবর্তন করতে হবে না।
  • স্ক্রীনের আকার xlarge সহ ডিভাইস বাস্তবায়নগুলিকে ফ্রিফর্ম মোড সমর্থন করা উচিত।

যদি ডিভাইস বাস্তবায়ন মাল্টি-উইন্ডো মোড(গুলি) এবং স্প্লিট স্ক্রিন মোড সমর্থন করে, তারা:

  • [C-2-1] ডিফল্ট হিসাবে একটি রিসাইজযোগ্য লঞ্চার প্রিলোড করতে হবে।
  • [C-2-2] একটি স্প্লিট-স্ক্রিন মাল্টি-উইন্ডোর ডক করা কার্যকলাপ অবশ্যই ক্রপ করতে হবে তবে এর কিছু বিষয়বস্তু দেখাতে হবে, যদি লঞ্চার অ্যাপটি ফোকাস করা উইন্ডো হয়।
  • [C-2-3] তৃতীয় পক্ষের লঞ্চার অ্যাপ্লিকেশনের ঘোষিত AndroidManifestLayout_minWidth এবং AndroidManifestLayout_minHeight মানগুলিকে অবশ্যই সম্মান করতে হবে এবং ডক করা কার্যকলাপের কিছু বিষয়বস্তু দেখানোর সময় এই মানগুলিকে ওভাররাইড করবেন না৷

যদি ডিভাইস বাস্তবায়নগুলি মাল্টি-উইন্ডো মোড (গুলি) এবং চিত্র-ইন-পিকচার মাল্টি-উইন্ডো মোডকে সমর্থন করে তবে তারা:

  • [C-3-1] পিকচার-ইন-পিকচার মাল্টি-উইন্ডো মোডে অ্যাক্টিভিটি চালু করতে হবে যখন অ্যাপটি হয়: * টার্গেটিং API লেভেল 26 বা তার বেশি এবং ঘোষণা করে android:supportsPictureInPicture * টার্গেটিং API লেভেল 25 বা তার কম এবং উভয় ঘোষণা করে android:resizeableActivity এবং android:supportsPictureInPicture
  • [C-3-2] setActions() API-এর মাধ্যমে বর্তমান PIP কার্যকলাপ দ্বারা নির্দিষ্ট করা তাদের SystemUI-তে কর্মগুলি অবশ্যই প্রকাশ করতে হবে।
  • [C-3-3] setAspectRatio() API-এর মাধ্যমে PIP কার্যকলাপ দ্বারা নির্দিষ্ট করা 1:2.39-এর থেকে বেশি বা সমান এবং 2.39:1-এর কম বা সমান আকৃতির অনুপাতকে সমর্থন করতে হবে।
  • [C-3-4] PIP উইন্ডো নিয়ন্ত্রণ করতে KeyEvent.KEYCODE_WINDOW ব্যবহার করতে হবে; যদি PIP মোড প্রয়োগ করা না হয়, তাহলে কীটি অবশ্যই ফোরগ্রাউন্ড কার্যকলাপের জন্য উপলব্ধ হতে হবে।
  • [C-3-5] একটি অ্যাপকে পিআইপি মোডে প্রদর্শন করা থেকে ব্লক করার জন্য ব্যবহারকারীর সামর্থ্য প্রদান করতে হবে; AOSP বাস্তবায়ন বিজ্ঞপ্তি ছায়ায় নিয়ন্ত্রণ থাকার মাধ্যমে এই প্রয়োজনীয়তা পূরণ করে।
  • [সি -3-6] যখন কোনও অ্যাপ্লিকেশন AndroidManifestLayout_minWidth এবং AndroidManifestLayout_minHeight জন্য কোনও মান ঘোষণা না করে তখন পিআইপি উইন্ডোর জন্য নিম্নলিখিত ন্যূনতম প্রস্থ এবং উচ্চতা বরাদ্দ করতে হবে:

    • কনফিগারেশন সহ ডিভাইসগুলি.ইউআইএমডি যা UI_MODE_TYPE_TELEVISION ব্যতীত অন্য সেট করা আছে তা অবশ্যই ন্যূনতম প্রস্থ এবং উচ্চতা 108 ডিপি বরাদ্দ করতে হবে।
    • কনফিগারেশন সহ ডিভাইসগুলি.ইউআইএমডি যা UI_MODE_TYPE_TELEVISION সেট করা আছে তা অবশ্যই সর্বনিম্ন প্রস্থ 240 ডিপি এবং সর্বনিম্ন উচ্চতা 135 ডিপি বরাদ্দ করতে হবে।

3.8.15। ডিসপ্লে কাটআউট

অ্যান্ড্রয়েড এসডিকে ডকুমেন্টে বর্ণিত হিসাবে একটি ডিসপ্লে কাটআউট সমর্থন করে। DisplayCutout এপিআই ডিসপ্লেটির প্রান্তে এমন একটি অঞ্চলকে সংজ্ঞায়িত করে যা প্রান্তে ডিসপ্লে কাটআউট বা বাঁকানো ডিসপ্লে এর কারণে কোনও অ্যাপ্লিকেশনটির জন্য কার্যকরী নাও হতে পারে।

যদি ডিভাইস বাস্তবায়নে ডিসপ্লে কাটআউট (গুলি) অন্তর্ভুক্ত থাকে তবে তারা:

  • [সি -1-5] ডিভাইসের দিক অনুপাতটি 1.0 (1: 1) হলে অবশ্যই কাটআউট (গুলি) থাকা উচিত নয়।
  • [সি -১-২] অবশ্যই প্রতি প্রান্তে একাধিক কাটআউট থাকতে হবে না।
  • [সি -1-3] অবশ্যই এসডিকে বর্ণিত হিসাবে WindowManager.LayoutParams মাধ্যমে অ্যাপ দ্বারা সেট করা ডিসপ্লে কাটআউট পতাকাগুলি সম্মান করতে হবে।
  • [সি -1-4] অবশ্যই DisplayCutout এপিআইতে সংজ্ঞায়িত সমস্ত কাটআউট মেট্রিকগুলির জন্য সঠিক মানগুলি প্রতিবেদন করতে হবে।

3.8.16। ডিভাইস নিয়ন্ত্রণ

অ্যান্ড্রয়েডে তৃতীয় পক্ষের অ্যাপ্লিকেশনগুলিকে দ্রুত স্থিতি এবং ব্যবহারকারীদের জন্য ক্রিয়াকলাপের জন্য ডিভাইস নিয়ন্ত্রণগুলি প্রকাশের অনুমতি দেওয়ার জন্য ControlsProviderService এবং Control এপিআই অন্তর্ভুক্ত রয়েছে।

ডিভাইস-নির্দিষ্ট প্রয়োজনীয়তার জন্য বিভাগ 2_2_3 দেখুন।

3.9। ডিভাইস প্রশাসন

অ্যান্ড্রয়েডে এমন বৈশিষ্ট্য অন্তর্ভুক্ত রয়েছে যা সুরক্ষা-সচেতন অ্যাপ্লিকেশনগুলিকে সিস্টেম পর্যায়ে ডিভাইস প্রশাসনের কার্য সম্পাদন করতে দেয়, যেমন পাসওয়ার্ড নীতি প্রয়োগ করা বা অ্যান্ড্রয়েড ডিভাইস প্রশাসনের এপিআইয়ের মাধ্যমে দূরবর্তী ওয়াইপ সম্পাদন করা।

যদি ডিভাইস বাস্তবায়নগুলি Android SDK ডকুমেন্টেশনে সংজ্ঞায়িত ডিভাইস প্রশাসন নীতিগুলির সম্পূর্ণ পরিসর বাস্তবায়ন করে, তারা:

  • [C-1-1] অবশ্যই android.software.device_admin ঘোষণা করতে হবে।
  • [C-1-2] বিভাগ 3.9.1 এবং বিভাগ 3.9.1.1 এ বর্ণিত ডিভাইস মালিকের বিধান সমর্থন করতে হবে।

3.9.1 ডিভাইস প্রভিশনিং

3.9.1.1 ডিভাইস মালিকের বিধান

যদি ডিভাইস বাস্তবায়ন android.software.device_admin ঘোষণা করে, তারা:

  • [C-1-1] একটি ডিভাইস পলিসি ক্লায়েন্ট (ডিপিসি) কে একটি ডিভাইস মালিক অ্যাপ হিসাবে নথিভুক্ত করাকে সমর্থন করতে হবে যা নীচে বর্ণনা করা হয়েছে:
    • যখন ডিভাইস বাস্তবায়নের এখনও কোনও ব্যবহারকারীর ডেটা নেই, এটি:
      • [C-1-3] DevicePolicyManager.isProvisioningAllowed(ACTION_PROVISION_MANAGED_DEVICE) এর জন্য true রিপোর্ট করতে হবে।
      • [C-1-4] android.app.action.PROVISION_MANAGED_DEVICE ইন্টেন্ট অ্যাকশনের প্রতিক্রিয়া হিসাবে ডিভাইসের মালিক অ্যাপ হিসাবে DPC অ্যাপ্লিকেশনটিকে নথিভুক্ত করতে হবে।
      • [C-1-5] ডিভাইসটি android.hardware.nfc ফিচার ফ্ল্যাগের মাধ্যমে নিয়ার-ফিল্ড কমিউনিকেশনস (NFC) সমর্থন ঘোষণা করলে এবং MIME টাইপের MIME_TYPE_PROVISIONING_NFC সহ একটি রেকর্ড সম্বলিত একটি NFC বার্তা গ্রহণ করলে ডিভাইস মালিক অ্যাপ হিসাবে DPC অ্যাপ্লিকেশনটিকে নথিভুক্ত করতে হবে .
    • যখন ডিভাইস বাস্তবায়নে ব্যবহারকারীর ডেটা থাকে, তখন এটি:
  • [সি -১-২] ডিভাইসের মালিক হিসাবে সেট করা অ্যাপটিতে সম্মতি জানাতে বিধানের প্রক্রিয়া আগে বা তার আগে কিছু ইতিবাচক পদক্ষেপের প্রয়োজন হতে হবে। সম্মতিটি ব্যবহারকারীর ক্রিয়াকলাপের মাধ্যমে বা কিছু প্রোগ্রাম্যাটিক উপায়ে হতে পারে তবে উপযুক্ত প্রকাশের বিজ্ঞপ্তি (এওএসপি -তে উল্লেখ করা হয়েছে) অবশ্যই ডিভাইসের মালিকের বিধান শুরুর আগে প্রদর্শিত হবে। এছাড়াও, ডিভাইস মালিকের বিধানের জন্য প্রোগ্রাম্যাটিক ডিভাইস মালিকের সম্মতি ব্যবস্থা (উদ্যোগের দ্বারা) ব্যবহৃত (এন্টারপ্রাইজ দ্বারা) অবশ্যই অ-উদ্যোগের ব্যবহারের জন্য বক্সের বাইরে অভিজ্ঞতায় হস্তক্ষেপ করা উচিত নয়।
  • [সি -1-3] অবশ্যই হার্ড কোডটি সম্মতি বা অন্য ডিভাইসের মালিক অ্যাপ্লিকেশনগুলির ব্যবহার রোধ করা উচিত নয়।

যদি ডিভাইস বাস্তবায়ন android.software.device_admin ঘোষণা করে, তবে একটি মালিকানাধীন ডিভাইস মালিক ব্যবস্থাপনা সমাধানও অন্তর্ভুক্ত করে এবং তাদের সমাধানে কনফিগার করা একটি অ্যাপ্লিকেশনকে স্ট্যান্ডার্ড দ্বারা স্বীকৃত স্ট্যান্ডার্ড "ডিভাইস মালিকের সমতুল্য" হিসাবে প্রচার করার জন্য একটি প্রক্রিয়া প্রদান করে Android DevicePolicyManager APIs, তারা:

  • [C-2-1] নির্দিষ্ট অ্যাপটি যে একটি বৈধ এন্টারপ্রাইজ ডিভাইস ম্যানেজমেন্ট সলিউশনের অন্তর্গত তা যাচাই করার জন্য অবশ্যই একটি প্রক্রিয়া থাকতে হবে এবং "ডিভাইস মালিক" হিসাবে সমতুল্য অধিকার পাওয়ার জন্য এটি ইতিমধ্যেই মালিকানাধীন সমাধানে কনফিগার করা হয়েছে। .
  • [C-2-2] DPC অ্যাপ্লিকেশনটিকে "ডিভাইস মালিক" হিসাবে নথিভুক্ত করার আগে android.app.action.PROVISION_MANAGED_DEVICE দ্বারা শুরু করা প্রবাহের মতো একই AOSP ডিভাইস মালিকের সম্মতি প্রকাশ দেখাতে হবে।
  • DPC অ্যাপ্লিকেশনটিকে "ডিভাইস মালিক" হিসাবে নথিভুক্ত করার আগে ডিভাইসে ব্যবহারকারীর ডেটা থাকতে পারে৷
3.9.1.2 পরিচালিত প্রোফাইল বিধান

যদি ডিভাইস বাস্তবায়ন android.software.managed_users ঘোষণা করে, তারা:

  • [C-1-1] একটি ডিভাইস পলিসি কন্ট্রোলার (DPC) অ্যাপ্লিকেশনকে একটি নতুন পরিচালিত প্রোফাইলের মালিক হওয়ার অনুমতি দেয় এমন APIগুলি অবশ্যই প্রয়োগ করতে হবে৷

  • [C-1-2] পরিচালিত প্রোফাইল প্রভিশনিং প্রক্রিয়া ( android.app.action.PROVISION_MANAGED_PROFILE দ্বারা সূচিত প্রবাহ) ব্যবহারকারীদের অবশ্যই AOSP বাস্তবায়নের সাথে সারিবদ্ধ হতে হবে।

  • [C-1-3] ডিভাইস পলিসি কন্ট্রোলার (DPC) দ্বারা একটি নির্দিষ্ট সিস্টেম ফাংশন নিষ্ক্রিয় করা হলে ব্যবহারকারীকে নির্দেশ করার জন্য সেটিংসের মধ্যে নিম্নলিখিত ব্যবহারকারীর সুবিধাগুলি প্রদান করতে হবে:

    • একটি সামঞ্জস্যপূর্ণ আইকন বা অন্যান্য ব্যবহারকারীর সামর্থ্য (উদাহরণস্বরূপ আপস্ট্রিম AOSP তথ্য আইকন) প্রতিনিধিত্ব করার জন্য যখন একটি নির্দিষ্ট সেটিং একটি ডিভাইস অ্যাডমিন দ্বারা সীমাবদ্ধ থাকে।
    • একটি সংক্ষিপ্ত ব্যাখ্যা বার্তা, যেমন setShortSupportMessage এর মাধ্যমে ডিভাইস অ্যাডমিন দ্বারা সরবরাহ করা হয়েছে।
    • DPC অ্যাপ্লিকেশনের আইকন।

3.9.2 পরিচালিত প্রোফাইল সমর্থন

যদি ডিভাইস বাস্তবায়ন android.software.managed_users ঘোষণা করে, তারা:

  • [C-1-1] android.app.admin.DevicePolicyManager API-এর মাধ্যমে পরিচালিত প্রোফাইলগুলিকে সমর্থন করতে হবে।
  • [C-1-2] একটি এবং শুধুমাত্র একটি পরিচালিত প্রোফাইল তৈরি করার অনুমতি দিতে হবে।
  • [C-1-3] একটি আইকন ব্যাজ ব্যবহার করতে হবে (AOSP আপস্ট্রিম ওয়ার্ক ব্যাজের অনুরূপ) পরিচালিত অ্যাপ্লিকেশন এবং উইজেট এবং সাম্প্রতিক এবং বিজ্ঞপ্তিগুলির মতো অন্যান্য ব্যাজযুক্ত UI উপাদানগুলিকে উপস্থাপন করতে।
  • [C-1-4] ব্যবহারকারী একটি পরিচালিত প্রোফাইল অ্যাপ্লিকেশনের মধ্যে থাকলে তা নির্দেশ করার জন্য একটি বিজ্ঞপ্তি আইকন (AOSP আপস্ট্রিম ওয়ার্ক ব্যাজের অনুরূপ) প্রদর্শন করতে হবে।
  • [C-1-5] ডিভাইসটি জেগে উঠলে ব্যবহারকারী পরিচালিত প্রোফাইলে থাকে তা নির্দেশ করে একটি টোস্ট প্রদর্শন করতে হবে (ACTION_USER_PRESENT) এবং ফোরগ্রাউন্ড অ্যাপ্লিকেশনটি পরিচালিত প্রোফাইলের মধ্যে রয়েছে।
  • [C-1-6] যেখানে একটি পরিচালিত প্রোফাইল বিদ্যমান, সেখানে ব্যবহারকারীকে পরিচালিত প্রোফাইল থেকে প্রাথমিক ব্যবহারকারীর কাছে অভিপ্রায় ফরোয়ার্ড করার অনুমতি দেওয়ার জন্য অভিপ্রায় 'নির্বাচনকারী'-তে একটি ভিজ্যুয়াল সামর্থ্য দেখাতে হবে, যদি ডিভাইস নীতি দ্বারা সক্ষম করা হয় নিয়ন্ত্রক।
  • [C-1-7] যেখানে একটি পরিচালিত প্রোফাইল বিদ্যমান, সেখানে প্রাথমিক ব্যবহারকারী এবং পরিচালিত প্রোফাইল উভয়ের জন্য নিম্নলিখিত ব্যবহারকারীর সামর্থ্য প্রকাশ করতে হবে:
    • প্রাথমিক ব্যবহারকারী এবং পরিচালিত প্রোফাইলের জন্য ব্যাটারি, অবস্থান, মোবাইল ডেটা এবং স্টোরেজ ব্যবহারের জন্য পৃথক অ্যাকাউন্টিং।
    • প্রাথমিক ব্যবহারকারী বা পরিচালিত প্রোফাইলের মধ্যে ইনস্টল করা VPN অ্যাপ্লিকেশনগুলির স্বাধীন ব্যবস্থাপনা।
    • প্রাথমিক ব্যবহারকারী বা পরিচালিত প্রোফাইলের মধ্যে ইনস্টল করা অ্যাপ্লিকেশনগুলির স্বাধীন ব্যবস্থাপনা।
    • প্রাথমিক ব্যবহারকারী বা পরিচালিত প্রোফাইলের মধ্যে অ্যাকাউন্টগুলির স্বাধীন পরিচালনা।
  • [C-1-8] ডিভাইস পলিসি কন্ট্রোলার অনুমতি দিলে আগে থেকে ইনস্টল করা ডায়ালার, পরিচিতি এবং মেসেজিং অ্যাপ্লিকেশানগুলি প্রাথমিক প্রোফাইলের পাশাপাশি পরিচালিত প্রোফাইল থেকে (যদি একটি থাকে) কলারের তথ্য অনুসন্ধান করতে এবং অনুসন্ধান করতে পারে তা নিশ্চিত করতে হবে।
  • [C-1-9] এটি নিশ্চিত করতে হবে যে এটি একাধিক ব্যবহারকারী সক্ষম সহ একটি ডিভাইসের জন্য প্রযোজ্য সমস্ত সুরক্ষা প্রয়োজনীয়তা পূরণ করে ( বিভাগ 9.5 দেখুন), যদিও পরিচালিত প্রোফাইলটি প্রাথমিক ব্যবহারকারী ছাড়াও অন্য ব্যবহারকারী হিসাবে গণনা করা হয় না।

যদি ডিভাইস বাস্তবায়নগুলি android.software.managed_users এবং android.software.secure_lock_screen ঘোষণা করে, তারা:

  • [সি -২-১] কেবলমাত্র একটি পরিচালিত প্রোফাইলে চলমান অ্যাপ্লিকেশনগুলিতে অ্যাক্সেস দেওয়ার জন্য নিম্নলিখিত প্রয়োজনীয়তাগুলি পূরণ করার জন্য একটি পৃথক লক স্ক্রিন নির্দিষ্ট করার ক্ষমতা অবশ্যই সমর্থন করতে হবে।
    • ডিভাইস বাস্তবায়ন অবশ্যই DevicePolicyManager.ACTION_SET_NEW_PASSWORD অভিপ্রায়কে সম্মান করতে হবে এবং পরিচালিত প্রোফাইলের জন্য একটি পৃথক লক স্ক্রিন শংসাপত্র কনফিগার করতে একটি ইন্টারফেস দেখাতে হবে৷
    • পরিচালিত প্রোফাইলের লক স্ক্রিন শংসাপত্রগুলি অবশ্যই অ্যান্ড্রয়েড ওপেন সোর্স প্রকল্প সাইটে নথিভুক্ত হিসাবে পিতামাতার প্রোফাইল হিসাবে একই শংসাপত্র স্টোরেজ এবং পরিচালনা ব্যবস্থাগুলি ব্যবহার করতে হবে।
    • GetParentProfileInstance দ্বারা ফেরত DevicePolicyManager ইন্সট্যান্স কল না করা পর্যন্ত DPC পাসওয়ার্ড নীতিগুলি শুধুমাত্র পরিচালিত প্রোফাইলের লক স্ক্রিন শংসাপত্রের ক্ষেত্রেই প্রযোজ্য হবে।
  • যখন পরিচালিত প্রোফাইলের পরিচিতিগুলি পূর্ব-ইন্সটল করা কল লগ, ইন-কল UI, ইন-প্রোগ্রেস এবং মিস-কল বিজ্ঞপ্তি, পরিচিতি এবং মেসেজিং অ্যাপগুলিতে প্রদর্শিত হয় তখন তাদের পরিচালিত প্রোফাইল অ্যাপ্লিকেশনগুলি নির্দেশ করতে ব্যবহৃত একই ব্যাজ দিয়ে ব্যাজ করা উচিত৷

3.9.3 পরিচালিত ব্যবহারকারী সমর্থন

যদি ডিভাইস বাস্তবায়ন android.software.managed_users ঘোষণা করে, তারা:

  • [সি -1-1] অবশ্যই বর্তমান ব্যবহারকারীর কাছ থেকে লগআউট করার জন্য একটি ব্যবহারকারীর সাশ্রয়ীতা সরবরাহ করতে হবে এবং isLogoutEnabled true প্রত্যাবর্তন করার সময় একাধিক-ব্যবহারকারী সেশনে প্রাথমিক ব্যবহারকারীর কাছে ফিরে যেতে হবে। ডিভাইসটি আনলক না করে লকস্ক্রিন থেকে ব্যবহারকারীর সামর্থ্য অবশ্যই অ্যাক্সেসযোগ্য হতে হবে।

3.10। অ্যাক্সেসযোগ্যতা

অ্যান্ড্রয়েড একটি অ্যাক্সেসিবিলিটি স্তর সরবরাহ করে যা প্রতিবন্ধী ব্যবহারকারীদের তাদের ডিভাইসগুলিকে আরও সহজে নেভিগেট করতে সহায়তা করে৷ এছাড়াও, অ্যান্ড্রয়েড প্ল্যাটফর্ম API সরবরাহ করে যা ব্যবহারকারী এবং সিস্টেম ইভেন্টগুলির জন্য কলব্যাক গ্রহণ করতে অ্যাক্সেসযোগ্যতা পরিষেবা বাস্তবায়নকে সক্ষম করে এবং টেক্সট-টু-স্পিচ, হ্যাপটিক ফিডব্যাক এবং ট্র্যাকবল/ডি-প্যাড নেভিগেশনের মতো বিকল্প প্রতিক্রিয়া প্রক্রিয়া তৈরি করে।

যদি ডিভাইস বাস্তবায়ন তৃতীয় পক্ষের অ্যাক্সেসিবিলিটি পরিষেবাগুলিকে সমর্থন করে, তারা:

  • [C-1-1] অ্যাক্সেসিবিলিটি APIs SDK ডকুমেন্টেশনে বর্ণিত Android অ্যাক্সেসিবিলিটি ফ্রেমওয়ার্কের একটি বাস্তবায়ন প্রদান করতে হবে।
  • [C-1-2] অবশ্যই অ্যাক্সেসিবিলিটি ইভেন্ট তৈরি করতে হবে এবং SDK-তে নথিভুক্ত সমস্ত নিবন্ধিত AccessibilityService বাস্তবায়নে উপযুক্ত AccessibilityEvent প্রদান করতে হবে।
  • [C-1-4] সিস্টেমের নেভিগেশন বারে একটি বোতাম যোগ করতে হবে যা ব্যবহারকারীকে অ্যাক্সেসিবিলিটি পরিষেবা নিয়ন্ত্রণ করতে দেয় যখন সক্রিয় অ্যাক্সেসিবিলিটি পরিষেবাগুলি AccessibilityServiceInfo.FLAG_REQUEST_ACCESSIBILITY_BUTTON ঘোষণা করে। নোট করুন যে কোনও সিস্টেম নেভিগেশন বার ছাড়াই ডিভাইস বাস্তবায়নের জন্য, এই প্রয়োজনীয়তা প্রযোজ্য নয়, তবে ডিভাইস বাস্তবায়নগুলি এই অ্যাক্সেসিবিলিটি পরিষেবাগুলিকে নিয়ন্ত্রণ করার জন্য ব্যবহারকারীর সামর্থ্য প্রদান করতে হবে।

যদি ডিভাইস বাস্তবায়নে প্রিন্সস্টলড অ্যাক্সেসিবিলিটি পরিষেবাগুলি অন্তর্ভুক্ত থাকে তবে তারা:

  • [সি -২-১] ফাইল ভিত্তিক এনক্রিপশন (এফবিই) দিয়ে ডেটা স্টোরেজ এনক্রিপ্ট করা হলে সরাসরি বুট সচেতন অ্যাপ্লিকেশন হিসাবে এই প্রাক-ইনস্টলড অ্যাক্সেসিবিলিটি পরিষেবাগুলি প্রয়োগ করতে হবে।
  • ব্যবহারকারীদের প্রাসঙ্গিক অ্যাক্সেসিবিলিটি পরিষেবাগুলি সক্ষম করার জন্য আউট-অফ-বক্স সেটআপ প্রবাহে একটি প্রক্রিয়া প্রদান করা উচিত, সেইসাথে ফন্টের আকার, প্রদর্শনের আকার এবং বড় করার অঙ্গভঙ্গিগুলি সামঞ্জস্য করার বিকল্পগুলি।

3.11। টেক্সট-টু-স্পিচ

অ্যান্ড্রয়েডের মধ্যে এমন API রয়েছে যা অ্যাপ্লিকেশনগুলিকে টেক্সট-টু-স্পিচ (TTS) পরিষেবাগুলি ব্যবহার করার অনুমতি দেয় এবং পরিষেবা প্রদানকারীদের TTS পরিষেবাগুলির বাস্তবায়ন প্রদানের অনুমতি দেয়।

যদি ডিভাইস বাস্তবায়ন android.hardware.audio.output বৈশিষ্ট্যটি প্রতিবেদন করে, তারা:

যদি ডিভাইস বাস্তবায়ন তৃতীয় পক্ষের TTS ইঞ্জিন ইনস্টলেশন সমর্থন করে, তারা:

  • [C-2-1] ব্যবহারকারীকে সিস্টেম স্তরে ব্যবহারের জন্য একটি TTS ইঞ্জিন নির্বাচন করার অনুমতি দেওয়ার জন্য ব্যবহারকারীর সামর্থ্য প্রদান করতে হবে।

3.12। টিভি ইনপুট ফ্রেমওয়ার্ক

অ্যান্ড্রয়েড টেলিভিশন ইনপুট ফ্রেমওয়ার্ক (টিআইএফ) অ্যান্ড্রয়েড টেলিভিশন ডিভাইসে লাইভ কন্টেন্ট বিতরণকে সহজ করে। টিআইএফ ইনপুট মডিউল তৈরি করতে একটি আদর্শ API প্রদান করে যা অ্যান্ড্রয়েড টেলিভিশন ডিভাইসগুলিকে নিয়ন্ত্রণ করে।

যদি ডিভাইস বাস্তবায়ন TIF সমর্থন করে, তারা:

  • [C-1-1] প্ল্যাটফর্ম বৈশিষ্ট্য android.software.live_tv ঘোষণা করতে হবে।
  • [সি -১-২] অবশ্যই সমস্ত টিআইএফ এপিআইকে সমর্থন করতে হবে যে এই এপিআই এবং তৃতীয় পক্ষের টিআইএফ-ভিত্তিক ইনপুট পরিষেবা ব্যবহার করে এমন একটি অ্যাপ্লিকেশন ডিভাইসে ইনস্টল করা এবং ব্যবহার করা যেতে পারে।

3.13। দ্রুত সেটিংস

অ্যান্ড্রয়েড একটি দ্রুত সেটিংস ইউআই উপাদান সরবরাহ করে যা প্রায়শই ব্যবহৃত বা জরুরীভাবে প্রয়োজনীয় ক্রিয়াকলাপগুলিতে দ্রুত অ্যাক্সেসের অনুমতি দেয়।

যদি ডিভাইস বাস্তবায়নে একটি দ্রুত সেটিংস ইউআই উপাদান অন্তর্ভুক্ত থাকে এবং তৃতীয় পক্ষের দ্রুত সেটিংস সমর্থন করে তবে তারা:

  • [সি -1-1] অবশ্যই তৃতীয় পক্ষের অ্যাপ্লিকেশন থেকে quicksettings এপিআইয়ের মাধ্যমে প্রদত্ত টাইলগুলি যুক্ত করতে বা অপসারণের অনুমতি দিতে হবে।
  • [সি -1-2] অবশ্যই দ্রুত সেটিংসে সরাসরি তৃতীয় পক্ষের অ্যাপ্লিকেশন থেকে একটি টাইল যুক্ত করা উচিত নয়।
  • [সি -1-3] অবশ্যই সিস্টেম সরবরাহিত দ্রুত সেটিং টাইলগুলির পাশাপাশি তৃতীয় পক্ষের অ্যাপ্লিকেশনগুলি থেকে সমস্ত ব্যবহারকারী-যুক্ত টাইলগুলি প্রদর্শন করতে হবে।

3.14। মিডিয়া ইউআই

যদি ডিভাইস বাস্তবায়নে অ-ভয়েস-অ্যাক্টিভেটেড অ্যাপ্লিকেশনগুলি (অ্যাপ্লিকেশনগুলি) অন্তর্ভুক্ত থাকে যা MediaBrowser বা MediaSession মাধ্যমে তৃতীয় পক্ষের অ্যাপ্লিকেশনগুলির সাথে যোগাযোগ করে তবে অ্যাপ্লিকেশনগুলি:

  • [সি -১-২] MediaDescription বর্ণিত হিসাবে গেটটিটল () এর মাধ্যমে প্রাপ্ত শিরোনামগুলি গেটিকোনবিটম্যাপ () বা গেটিকোনুরি () এর মাধ্যমে প্রাপ্ত আইকনগুলি অবশ্যই স্পষ্টভাবে প্রদর্শন করতে হবে। সুরক্ষা বিধিমালা মেনে চলার জন্য শিরোনামগুলি সংক্ষিপ্ত করতে পারে (যেমন ড্রাইভার বিভ্রান্তি)।

  • [সি -1-3] যখনই এই তৃতীয় পক্ষের অ্যাপ্লিকেশন দ্বারা সরবরাহিত সামগ্রী প্রদর্শন করা উচিত তখন অবশ্যই তৃতীয় পক্ষের অ্যাপ্লিকেশন আইকনটি প্রদর্শন করতে হবে।

  • [সি -1-4] অবশ্যই ব্যবহারকারীকে পুরো MediaBrowser শ্রেণিবিন্যাসের সাথে ইন্টারঅ্যাক্ট করার অনুমতি দিতে হবে। সুরক্ষা বিধিমালা (যেমন ড্রাইভার ডিস্ট্রাকশন) মেনে চলার জন্য শ্রেণিবিন্যাসের অংশে অ্যাক্সেসকে সীমাবদ্ধ করতে পারে তবে সামগ্রী বা সামগ্রী সরবরাহকারীর উপর ভিত্তি করে পছন্দসই চিকিত্সা দেওয়া উচিত নয়।

  • [সি -1-5] অবশ্যই KEYCODE_HEADSETHOOK বা KEYCODE_MEDIA_PLAY_PAUSE এর ডাবল ট্যাপ বিবেচনা করতে হবে KEYCODE_MEDIA_NEXT হিসাবে MediaSession.Callback#onMediaButtonEvent

3.15। তাত্ক্ষণিক অ্যাপস

ডিভাইস বাস্তবায়নগুলি অবশ্যই নিম্নলিখিত প্রয়োজনীয়তাগুলি পূরণ করতে হবে:

  • [সি -0-1] তাত্ক্ষণিক অ্যাপ্লিকেশনগুলিকে কেবলমাত্র android:protectionLevel "instant" তে সেট করে।
  • [সি -0-2] তাত্ক্ষণিক অ্যাপ্লিকেশনগুলি অবশ্যই অন্তর্নিহিত উদ্দেশ্যগুলির মাধ্যমে ইনস্টল করা অ্যাপ্লিকেশনগুলির সাথে ইন্টারঅ্যাক্ট করা উচিত নয় যদি না নিম্নলিখিতগুলির মধ্যে একটি সত্য না হয়:
  • [সি -0-3] তাত্ক্ষণিক অ্যাপ্লিকেশনগুলি অবশ্যই ইনস্টলড অ্যাপ্লিকেশনগুলির সাথে স্পষ্টভাবে ইন্টারঅ্যাক্ট করা উচিত নয় যদি না উপাদানটি অ্যান্ড্রয়েডের মাধ্যমে উন্মুক্ত না করা হয়: ভিসিবেলটাইনস্ট্যান্ট অ্যাপস।
  • [সি -0-4] ইনস্টলড অ্যাপ্লিকেশনগুলি অবশ্যই ডিভাইসে তাত্ক্ষণিক অ্যাপ্লিকেশনগুলির বিশদটি দেখতে হবে না যদি না তাত্ক্ষণিক অ্যাপ্লিকেশনটি ইনস্টল করা অ্যাপ্লিকেশনটির সাথে স্পষ্টভাবে সংযুক্ত না হয়।

যদি ডিভাইস বাস্তবায়নগুলি তাত্ক্ষণিক অ্যাপ্লিকেশনগুলিকে সমর্থন করে তবে তারা:

  • [সি -1-1] তাত্ক্ষণিক অ্যাপ্লিকেশনগুলির সাথে ইন্টারঅ্যাক্ট করার জন্য নিম্নলিখিত ব্যবহারকারীর ব্যয়গুলি সরবরাহ করতে হবে। এওএসপি ডিফল্ট সিস্টেম ইউআই, সেটিংস এবং লঞ্চারের সাথে প্রয়োজনীয়তাগুলি পূরণ করে।
  • [সি -1-2] প্রতিটি পৃথক অ্যাপ্লিকেশন প্যাকেজের জন্য স্থানীয়ভাবে ক্যাশে থাকা তাত্ক্ষণিক অ্যাপ্লিকেশনগুলি দেখতে এবং মুছতে ব্যবহারকারীর সাশ্রয়ীতা সরবরাহ করতে হবে।
  • [সি -1-3] অবশ্যই একটি অবিচ্ছিন্ন ব্যবহারকারী বিজ্ঞপ্তি সরবরাহ করতে হবে যা অগ্রভাগে একটি তাত্ক্ষণিক অ্যাপ্লিকেশন চলাকালীন ধসে পড়তে পারে। এই ব্যবহারকারীর বিজ্ঞপ্তিতে অবশ্যই অন্তর্ভুক্ত থাকতে হবে যে তাত্ক্ষণিক অ্যাপ্লিকেশনগুলির জন্য ইনস্টলেশন প্রয়োজন হয় না এবং এমন একটি ব্যবহারকারী সাশ্রয়ীতা সরবরাহ করে যা ব্যবহারকারীকে সেটিংসে অ্যাপ্লিকেশন তথ্য স্ক্রিনে নির্দেশ দেয়। For Instant Apps launched via web intents, as defined by using an intent with action set to Intent.ACTION_VIEW and with a scheme of "http" or "https", an additional user affordance SHOULD allow the user not to launch the Instant App and launch the associated link with the configured web browser, if a browser is available on the device.
  • [C-1-4] MUST allow running Instant Apps to be accessed from the Recents function if the Recents function is available on the device.
  • [C-1-5] MUST preload one or more applications or service components with an intent handler for the intents listed in the SDK here and make the intents visible for Instant Apps.

3.16। সঙ্গী ডিভাইস জুড়ি

অ্যান্ড্রয়েডের সহযোগী ডিভাইসগুলির সাথে আরও কার্যকরভাবে অ্যাসোসিয়েশন পরিচালনা করতে সহযোগী ডিভাইস জুটির জন্য সমর্থন অন্তর্ভুক্ত রয়েছে এবং অ্যাপ্লিকেশনগুলির জন্য এই বৈশিষ্ট্যটি অ্যাক্সেস করার জন্য CompanionDeviceManager এপিআই সরবরাহ করে।

যদি ডিভাইস বাস্তবায়নগুলি সহযোগী ডিভাইস জুটিযুক্ত বৈশিষ্ট্যটিকে সমর্থন করে তবে তারা:

  • [সি -1-1] অবশ্যই বৈশিষ্ট্যটি পতাকা FEATURE_COMPANION_DEVICE_SETUP ঘোষণা করতে হবে।
  • [সি -১-২] অবশ্যই android.companion প্যাকেজটিতে এপিআইগুলি পুরোপুরি প্রয়োগ করা হয়েছে তা নিশ্চিত করতে হবে।
  • [সি -1-3] ব্যবহারকারীর জন্য ব্যবহারকারীর জন্য অবশ্যই কোনও সহযোগী ডিভাইস উপস্থিত এবং কার্যকর রয়েছে তা নিশ্চিত করার জন্য ব্যবহারকারীর ব্যয় সরবরাহ করতে হবে।

3.17। Heavyweight Apps

If device implementations declare the feature FEATURE_CANT_SAVE_STATE , then they:

  • [C-1-1] MUST have only one installed app that specifies cantSaveState running in the system at a time. If the user leaves such an app without explicitly exiting it (for example by pressing home while leaving an active activity the system, instead of pressing back with no remaining active activities in the system), then device implementations MUST prioritize that app in RAM as they do for other things that are expected to remain running, such as foreground services. While such an app is in the background, the system can still apply power management features to it, such as limiting CPU and network access.
  • [C-1-2] MUST provide a UI affordance to chose the app that won't participate in the normal state save/restore mechanism once the user launches a second app declared with cantSaveState attribute.
  • [C-1-3] MUST NOT apply other changes in policy to apps that specify cantSaveState , such as changing CPU performance or changing scheduling prioritization.

If device implementations don't declare the feature FEATURE_CANT_SAVE_STATE , then they:

  • [C-1-1] MUST ignore the cantSaveState attribute set by apps and MUST NOT change the app behavior based on that attribute.

3.18। পরিচিতি

Android includes Contacts Provider APIs to allow applications to manage contact information stored on the device. Contact data that is entered directly into the device is typically synchronized with a web service, but the data MAY also only reside locally on the device. Contacts that are only stored on the device are referred to as local contacts.

RawContacts are "associated with" or "stored in" an Account when the ACCOUNT_NAME , and ACCOUNT_TYPE , columns for the raw contacts match the corresponding Account.name and Account.type fields of the account.

Default local account : an account for raw contacts that are only stored on the device and not associated with an Account in the AccountManager , which are created with null values for the ACCOUNT_NAME , and ACCOUNT_TYPE , columns.

Custom local account : an account for raw contacts that are only stored on the device and not associated with an Account in the AccountManager, which are created with at least one non-null value for the ACCOUNT_NAME , and ACCOUNT_TYPE , columns.

ডিভাইস বাস্তবায়ন:

  • [C-SR] Are STRONGLY RECOMMENDED to not create custom local accounts .

If device implementations use a custom local account :

  • [C-1-1] The ACCOUNT_NAME , of the custom local account MUST be returned by ContactsContract.RawContacts.getLocalAccountName
  • [C-1-2] The ACCOUNT_TYPE , of the custom local account MUST be returned by ContactsContract.RawContacts.getLocalAccountType
  • [C-1-3] Raw contacts that are inserted by third party applications with the default local account (ie by setting null values for ACCOUNT_NAME and ACCOUNT_TYPE ) MUST be inserted to the custom local account .
  • [C-1-4] Raw contacts inserted into the custom local account MUST not be removed when accounts are added or removed.
  • [C-1-5] Delete operations performed against the custom local account MUST result in raw contacts being purged immediately (as if the CALLER_IS_SYNCADAPTER param was set to true), even if the CALLER\_IS\_SYNCADAPTER param was set to false or not নির্দিষ্ট করা

4. অ্যাপ্লিকেশন প্যাকেজিং সামঞ্জস্য

ডিভাইস বাস্তবায়ন:

  • [সি -0-1] অফিসিয়াল অ্যান্ড্রয়েড এসডিকে অন্তর্ভুক্ত "এএপ্ট" সরঞ্জাম দ্বারা উত্পাদিত অ্যান্ড্রয়েড ".apk" ফাইলগুলি ইনস্টল এবং চালাতে সক্ষম হতে হবে।
  • As the above requirement may be challenging, device implementations are RECOMMENDED to use the AOSP reference implementation's package management system.

ডিভাইস বাস্তবায়ন:

  • [C-0-2] MUST support verifying “.apk” files using the APK Signature Scheme v3 , APK Signature Scheme v2 and JAR signing .
  • [সি -0-3] অবশ্যই .apk , অ্যান্ড্রয়েড ম্যানিফেস্ট , ডালভিক বাইটকোড , বা রেন্ডারস্ক্রিপ্ট বাইটকোড ফর্ম্যাটগুলি এমনভাবে প্রসারিত করা উচিত নয় যা এই ফাইলগুলি অন্যান্য সামঞ্জস্যপূর্ণ ডিভাইসে সঠিকভাবে ইনস্টল করতে এবং সঠিকভাবে চালানো থেকে বিরত রাখতে পারে।
  • [C-0-4] MUST NOT allow apps other than the current "installer of record" for the package to silently uninstall the app without any user confirmation, as documented in the SDK for the DELETE_PACKAGE permission. কেবলমাত্র ব্যতিক্রমগুলি হ'ল সিস্টেম প্যাকেজ যাচাইকারী অ্যাপ্লিকেশনটি হ্যান্ডলিং প্যাকেজ_নিডস_ভারিফিকেশন ইন্টেন্ট এবং স্টোরেজ ম্যানেজার অ্যাপ্লিকেশনটি হ্যান্ডলিং অ্যাকশন_ম্যানেজ_স্টোরেজ ইনটেন্ট।

  • [সি -0-5] অবশ্যই একটি ক্রিয়াকলাপ থাকতে হবে যা android.settings.MANAGE_UNKNOWN_APP_SOURCES পরিচালনা করে Manan

  • [সি -0-6] অবশ্যই অজানা উত্স থেকে অ্যাপ্লিকেশন প্যাকেজগুলি ইনস্টল করা উচিত নয়, যদি না ইনস্টলেশন অনুরোধ করে এমন অ্যাপ্লিকেশনটি নিম্নলিখিত সমস্ত প্রয়োজনীয়তা পূরণ করে:

    • এটি অবশ্যই REQUEST_INSTALL_PACKAGES অনুমতি ঘোষণা করতে হবে বা android:targetSdkVersion 24 বা তার চেয়ে কম সেট করে।
    • এটি অবশ্যই অজানা উত্স থেকে অ্যাপ্লিকেশন ইনস্টল করার জন্য ব্যবহারকারীর দ্বারা অনুমতি দেওয়া হয়েছে।
  • অ্যাপ্লিকেশন প্রতি অজানা উত্স থেকে অ্যাপ্লিকেশন ইনস্টল করার অনুমতি প্রদান/প্রত্যাহারের জন্য ব্যবহারকারীর সামর্থ্য সরবরাহ করা উচিত, তবে এটি কোনও নো-অপ হিসাবে বাস্তবায়ন করতে এবং startActivityForResult() এর জন্য RESULT_CANCELED বেছে নিতে পারেন, যদি ডিভাইস বাস্তবায়ন ব্যবহারকারীদের অনুমতি না দিতে না পারে এই পছন্দ আছে। যাইহোক, এমনকি এই জাতীয় ক্ষেত্রেও তাদের ব্যবহারকারীকে নির্দেশ করা উচিত যে কেন এই জাতীয় কোনও পছন্দ উপস্থাপন করা হয়নি।

  • [C-0-7] MUST display a warning dialog with the warning string that is provided through the system API PackageManager.setHarmfulAppWarning to the user before launching an activity in an application that has been marked by the same system API PackageManager.setHarmfulAppWarning as potentially ক্ষতিকর

  • SHOULD provide a user affordance to choose to uninstall or launch an application on the warning dialog.

  • [C-0-8] MUST implement support for Incremental File System as documented here .

  • [C-0-9] MUST support verifying .apk files using the APK Signature Scheme v4 .

  • If device implementations are already launched on an earlier Android version and cannot meet the requirements [C-0-8] and [C-0-9] through a system software update, they MAY be exempted from these requirements.

5. মাল্টিমিডিয়া সামঞ্জস্য

ডিভাইস বাস্তবায়ন:

  • [সি -0-1] MediaCodecList দ্বারা ঘোষিত প্রতিটি এবং প্রতিটি কোডেকের জন্য বিভাগ 5.1 এ সংজ্ঞায়িত মিডিয়া ফর্ম্যাট, এনকোডার, ডিকোডার, ফাইলের ধরণ এবং ধারক ফর্ম্যাটগুলি সমর্থন করতে হবে।
  • [সি -0-2] MediaCodecList মাধ্যমে তৃতীয় পক্ষের অ্যাপ্লিকেশনগুলিতে উপলব্ধ এনকোডার, ডিকোডারগুলির সমর্থন ঘোষণা এবং প্রতিবেদন করতে হবে।
  • [C-0-3] MUST be able to properly decode and make available to third-party apps all the formats it can encode. এর মধ্যে এমন সমস্ত বিটস্ট্রিম অন্তর্ভুক্ত রয়েছে যা এর এনকোডারগুলি উত্পন্ন করে এবং এর CamcorderProfile রিপোর্ট করা প্রোফাইলগুলি অন্তর্ভুক্ত করে।

ডিভাইস বাস্তবায়ন:

  • ন্যূনতম কোডেক বিলম্বের জন্য লক্ষ্য করা উচিত, অন্যদের কথায়, তারা
    • ইনপুট বাফারগুলি গ্রাস করা এবং সঞ্চয় করা উচিত নয় এবং কেবল একবার প্রক্রিয়া করা ইনপুট বাফারগুলি ফেরত দেওয়া উচিত নয়।
    • স্ট্যান্ডার্ড (যেমন এসপিএস) দ্বারা বর্ণিত তুলনায় ডিকোডড বাফারদের ধরে রাখা উচিত নয়।
    • জিওপি কাঠামোর দ্বারা প্রয়োজনের চেয়ে বেশি সময় এনকোডেড বাফারগুলি ধরে রাখা উচিত নয়।

নীচের বিভাগে তালিকাভুক্ত সমস্ত কোডেকগুলি অ্যান্ড্রয়েড ওপেন সোর্স প্রকল্প থেকে পছন্দসই অ্যান্ড্রয়েড বাস্তবায়নে সফ্টওয়্যার বাস্তবায়ন হিসাবে সরবরাহ করা হয়েছে।

দয়া করে মনে রাখবেন যে গুগল বা ওপেন হ্যান্ডসেট জোট কেউই কোনও উপস্থাপনা করে না যে এই কোডেকগুলি তৃতীয় পক্ষের পেটেন্টগুলি থেকে মুক্ত। হার্ডওয়্যার বা সফ্টওয়্যার পণ্যগুলিতে এই উত্স কোডটি ব্যবহার করার ইচ্ছা পোষণকারীদের পরামর্শ দেওয়া হয় যে ওপেন সোর্স সফ্টওয়্যার বা শেয়ারওয়্যার সহ এই কোডটির বাস্তবায়নের জন্য প্রাসঙ্গিক পেটেন্টধারীদের পেটেন্ট লাইসেন্সের প্রয়োজন হতে পারে।

5.1। মিডিয়া কোডেক

5.1.1। অডিও এনকোডিং

5.1.3 এ আরও বিশদ দেখুন। অডিও কোডেক বিশদ

If device implementations declare android.hardware.microphone , they MUST support encoding the following audio formats and make them available to third-party apps:

  • [সি -1-1] পিসিএম/তরঙ্গ
  • [C-1-2] FLAC
  • [C-1-3] Opus

All audio encoders MUST support:

5.1.2। অডিও ডিকোডিং

5.1.3 এ আরও বিশদ দেখুন। অডিও কোডেক বিশদ

If device implementations declare support for the android.hardware.audio.output feature, they must support decoding the following audio formats:

  • [সি -1-1] এমপিইজি -4 এএসি প্রোফাইল (এএসি এলসি)
  • [সি -1-2] এমপিইজি -4 তিনি এএসি প্রোফাইল (এএসি+)
  • [সি -1-3] এমপিইজি -4 তিনি এএসিভি 2 প্রোফাইল (বর্ধিত এএসি+)
  • [সি -1-4] এএসি এল্ড (বর্ধিত কম বিলম্ব এএসি)
  • [C-1-11] xHE-AAC (ISO/IEC 23003-3 Extended HE AAC Profile, which includes the USAC Baseline Profile, and ISO/IEC 23003-4 Dynamic Range Control Profile)
  • [সি -1-5] ফ্ল্যাক
  • [সি -1-6] এমপি 3
  • [সি -1-7] মিডি
  • [সি -1-8] ভোর্বিস
  • [C-1-9] PCM/WAVE including high-resolution audio formats up to 24 bits, 192 kHz sample rate, and 8 channels. Note that this requirement is for decoding only, and that a device is permitted to downsample and downmix during the playback phase.
  • [সি -1-10] ওপাস

যদি ডিভাইস বাস্তবায়নগুলি android.media.MediaCodec এপিআই -তে ডিফল্ট এএসি অডিও ডিকোডারের মাধ্যমে পিসিএম -এ মাল্টিচ্যানেল স্ট্রিমগুলির (অর্থাত্ দুটি চ্যানেলের বেশি) এএসি ইনপুট বাফারগুলির ডিকোডিংকে সমর্থন করে, নিম্নলিখিতগুলি অবশ্যই সমর্থন করতে হবে:

  • [সি -২-১] ডিকোডিং অবশ্যই ডাউনমিক্সিং ছাড়াই সম্পাদন করতে হবে (যেমন একটি 5.0 এএসি স্ট্রিম অবশ্যই পিসিএমের পাঁচটি চ্যানেলে ডিকোড করতে হবে, একটি 5.1 এএসি স্ট্রিম অবশ্যই পিসিএমের ছয়টি চ্যানেলে ডিকোড করতে হবে)।
  • [সি -২-২] ডায়নামিক রেঞ্জের মেটাডেটা অবশ্যই আইএসও/আইইসি 14496-3 এ "ডায়নামিক রেঞ্জ কন্ট্রোল (ডিআরসি)" এবং android.media.MediaFormat ডিআরসি কীগুলি কনফিগার করতে অবশ্যই সংজ্ঞায়িত করা উচিত অডিও ডিকোডার। The AAC DRC keys were introduced in API 21, and are: KEY_AAC_DRC_ATTENUATION_FACTOR , KEY_AAC_DRC_BOOST_FACTOR , KEY_AAC_DRC_HEAVY_COMPRESSION , KEY_AAC_DRC_TARGET_REFERENCE_LEVEL and KEY_AAC_ENCODED_TARGET_LEVEL .
  • [SR] It is STRONGLY RECOMMENDED that requirements C-2-1 and C-2-2 above are satisfied by all AAC audio decoders.

When decoding USAC audio, MPEG-D (ISO/IEC 23003-4):

  • [C-3-1] Loudness and DRC metadata MUST be interpreted and applied according to MPEG-D DRC Dynamic Range Control Profile Level 1.
  • [C-3-2] The decoder MUST behave according to the configuration set with the following android.media.MediaFormat keys: KEY_AAC_DRC_TARGET_REFERENCE_LEVEL and KEY_AAC_DRC_EFFECT_TYPE .

MPEG-4 AAC, HE AAC, and HE AACv2 profile decoders:

  • MAY support loudness and dynamic range control using ISO/IEC 23003-4 Dynamic Range Control Profile.

If ISO/IEC 23003-4 is supported and if both ISO/IEC 23003-4 and ISO/IEC 14496-3 metadata are present in a decoded bitstream, then:

  • ISO/IEC 23003-4 metadata SHALL take precedence.

All audio decoders MUST support outputting:

5.1.3। অডিও কোডেক বিশদ

ফর্ম্যাট/কোডেক বিস্তারিত File Types/Container Formats to be supported
এমপিইজি -4 এএসি প্রোফাইল
(এএসি এলসি)
মনো/স্টেরিও/5.0/5.1 এর জন্য সমর্থন 8 থেকে 48 কেএইচজেডের স্ট্যান্ডার্ড স্যাম্পলিং হারের সাথে সামগ্রী।
  • 3 জিপিপি (.3 জিপি)
  • এমপিইজি -4 (.এমপি 4, .এম 4 এ)
  • বিজ্ঞাপনগুলি কাঁচা এএসি (.aac, Adif সমর্থিত নয়)
  • MPEG-TS (.ts, not seekable, decode only)
  • Matroska (.mkv, decode only)
এমপিইজি -4 তিনি এএসি প্রোফাইল (এএসি+) মনো/স্টেরিও/5.0/5.1 এর জন্য সমর্থন 16 থেকে 48 কেএইচজেডের স্ট্যান্ডার্ড স্যাম্পলিং হারের সাথে সামগ্রী।
  • 3 জিপিপি (.3 জিপি)
  • এমপিইজি -4 (.এমপি 4, .এম 4 এ)
এমপিইজি -4 তিনি এএসিভি 2
প্রোফাইল (বর্ধিত এএসি+)
মনো/স্টেরিও/5.0/5.1 এর জন্য সমর্থন 16 থেকে 48 কেএইচজেডের স্ট্যান্ডার্ড স্যাম্পলিং হারের সাথে সামগ্রী।
  • 3 জিপিপি (.3 জিপি)
  • এমপিইজি -4 (.এমপি 4, .এম 4 এ)
এএসি এল্ড (বর্ধিত কম বিলম্ব এএসি) 16 থেকে 48 কেএইচজেডের স্ট্যান্ডার্ড স্যাম্পলিং হারের সাথে মনো/স্টেরিও সামগ্রীর জন্য সমর্থন।
  • 3 জিপিপি (.3 জিপি)
  • এমপিইজি -4 (.এমপি 4, .এম 4 এ)
ইউএসএসি Support for mono/stereo content with standard sampling rates from 7.35 to 48 kHz. এমপিইজি -4 (.এমপি 4, .এম 4 এ)
এএমআর-এনবি 4.75 থেকে 12.2 কেবিপিএস নমুনা @ 8 কেএইচজেড 3 জিপিপি (.3 জিপি)
AMR-WB 9 rates from 6.60 kbit/s to 23.85 kbit/s sampled @ 16 kHz, as defined at AMR-WB, Adaptive Multi-Rate - Wideband Speech Codec 3 জিপিপি (.3 জিপি)
FLAC For both encoder and decoder: at least Mono and Stereo modes MUST be supported. Sample rates up to 192 kHz MUST be supported; 16-bit and 24-bit resolution MUST be supported. FLAC 24-bit audio data handling MUST be available with floating point audio configuration.
  • FLAC (.flac)
  • MPEG-4 (.mp4, .m4a, decode only)
  • Matroska (.mkv, decode only)
MP3 মনো/স্টেরিও 8-320 কেবিপিএস কনস্ট্যান্ট (সিবিআর) বা ভেরিয়েবল বিট্রেট (ভিবিআর)
  • এমপি 3 (.এমপি 3)
  • MPEG-4 (.mp4, .m4a, decode only)
  • Matroska (.mkv, decode only)
MIDI এমআইডিআই টাইপ 0 এবং 1. ডিএলএস সংস্করণ 1 এবং 2. এক্সএমএফ এবং মোবাইল এক্সএমএফ। রিংটোন ফর্ম্যাটগুলি আরটিটিটিএল/আরটিএক্স, ওটিএ এবং ইমলোডি জন্য সমর্থন
  • 0 এবং 1 টাইপ করুন (.mid, .xmf, .mxmf)
  • আরটিটিএল/আরটিএক্স (.আরটিটিএল, .আরটিএক্স)
  • আইমেলোডি (.আইএমওয়াই)
ভরবিস
  • ওজিজি (.ওজিজি)
  • MPEG-4 (.mp4, .m4a, decode only)
  • ম্যাট্রোস্কা (.mkv)
  • Webm (.webm)
পিসিএম/তরঙ্গ PCM codec MUST support 16-bit linear PCM and 16-bit float. WAVE extractor must support 16-bit, 24-bit, 32-bit linear PCM and 32-bit float (rates up to limit of hardware). Sampling rates MUST be supported from 8 kHz to 192 kHz. তরঙ্গ (.wav)
ওপাস Decoding: Support for mono, stereo, 5.0 and 5.1 content with sampling rates of 8000, 12000, 16000, 24000, and 48000 Hz.
Encoding: Support for mono and stereo content with sampling rates of 8000, 12000, 16000, 24000, and 48000 Hz.
  • ওজিজি (.ওজিজি)
  • MPEG-4 (.mp4, .m4a, decode only)
  • ম্যাট্রোস্কা (.mkv)
  • Webm (.webm)

5.1.4। চিত্র এনকোডিং

5.1.6 এ আরও বিশদ দেখুন। চিত্র কোডেক বিশদ

ডিভাইস বাস্তবায়নগুলি অবশ্যই নীচের চিত্র এনকোডিং এনকোডিং সমর্থন করে:

  • [সি -0-1] জেপিইজি
  • [সি -0-2] পিএনজি
  • [সি -0-3] ওয়েবপি

If device implementations support HEIC encoding via android.media.MediaCodec for media type MIMETYPE_IMAGE_ANDROID_HEIC , they:

5.1.5। ইমেজ ডিকোডিং

5.1.6 এ আরও বিশদ দেখুন। চিত্র কোডেক বিশদ

Device implementations MUST support decoding the following image encoding:

  • [সি -0-1] জেপিইজি
  • [সি -0-2] জিআইএফ
  • [সি -0-3] পিএনজি
  • [সি -0-4] বিএমপি
  • [সি -0-5] ওয়েবপি
  • [সি -0-6] কাঁচা

If device implementations support HEVC video decoding, they: * [C-1-1] MUST support HEIF (HEIC) image decoding.

Image decoders that support a high bit-depth format (9+ bits per channel):

  • [C-2-1] MUST support outputting an 8-bit equivalent format if requested by the application, for example, via the ARGB_8888 config of android.graphics.Bitmap .

5.1.6। চিত্র কোডেক বিশদ

ফর্ম্যাট/কোডেক বিস্তারিত সমর্থিত ফাইল প্রকার/ধারক ফর্ম্যাট
জেপিইজি বেস+প্রগতিশীল JPEG (.jpg)
জিআইএফ GIF (.gif)
পিএনজি PNG (.png)
বিএমপি BMP (.bmp)
ওয়েবপি WebP (.webp)
কাঁচা এআরডাব্লু (.আরডাব্লু), সিআর 2 (.cr2), ডিএনজি (.ডিএনজি), নেফ (.এনএফ), এনআরডাব্লু (.এনআরডাব্লু), ওআরএফ (.আরএফ), পিইএফ (.পিএফ), আরএএফ (.আরএফ), আরডাব্লু 2 (আরডাব্লু 2 ( .আরডাব্লু 2), এসআরডাব্লু (.এসআরডাব্লু)
HEIF Image, Image collection, Image sequence HEIF (.heif), HEIC (.heic)

Image encoder and decoders exposed through the MediaCodec API

  • [C-1-1] MUST support YUV420 8:8:8 flexible color format ( COLOR_FormatYUV420Flexible ) through CodecCapabilities .

  • [SR] STRONGLY RECOMMENDED to support RGB888 color format for input Surface mode.

  • [C-1-3] MUST support at least one of a planar or semiplanar YUV420 8:8:8 color format: COLOR_FormatYUV420PackedPlanar (equivalent to COLOR_FormatYUV420Planar ) or COLOR_FormatYUV420PackedSemiPlanar (equivalent to COLOR_FormatYUV420SemiPlanar ). They are STRONGLY RECOMMENDED to support both.

5.1.7। ভিডিও কোডেক

  • ওয়েব ভিডিও স্ট্রিমিং এবং ভিডিও-কনফারেন্স পরিষেবাদির গ্রহণযোগ্য মানের জন্য, ডিভাইস বাস্তবায়নের একটি হার্ডওয়্যার ভিপি 8 কোডেক ব্যবহার করা উচিত যা প্রয়োজনীয়তাগুলি পূরণ করে।

যদি ডিভাইস বাস্তবায়নে কোনও ভিডিও ডিকোডার বা এনকোডার অন্তর্ভুক্ত থাকে:

  • [সি -1-1] ভিডিও কোডেকগুলি অবশ্যই আউটপুট এবং ইনপুট বাইটবফার আকারগুলিকে সমর্থন করতে পারে যা স্ট্যান্ডার্ড এবং কনফিগারেশন দ্বারা নির্ধারিত হিসাবে বৃহত্তম সম্ভাব্য সংকুচিত এবং সংকুচিত ফ্রেমকে সামঞ্জস্য করে তবে সামগ্রিক।

  • [C-1-2] Video encoders and decoders MUST support YUV420 8:8:8 flexible color formats ( COLOR_FormatYUV420Flexible ) through CodecCapabilities .

  • [C-1-3] Video encoders and decoders MUST support at least one of a planar or semiplanar YUV420 8:8:8 color format: COLOR_FormatYUV420PackedPlanar (equivalent to COLOR_FormatYUV420Planar ) or COLOR_FormatYUV420PackedSemiPlanar (equivalent to COLOR_FormatYUV420SemiPlanar ). They are STRONGLY RECOMMENDED to support both.

  • [SR] Video encoders and decoders are STRONGLY RECOMMENDED to support at least one of a hardware optimized planar or semiplanar YUV420 8:8:8 color format (YV12, NV12, NV21 or equivalent vendor optimized format.)

  • [C-1-5] Video decoders that support a high bit-depth format (9+ bits per channel) MUST support outputting an 8-bit equivalent format if requested by the application. This MUST be reflected by supporting an YUV420 8:8:8 color format via android.media.MediaCodecInfo .

যদি ডিভাইস বাস্তবায়নগুলি HDR প্রোফাইলের মাধ্যমে Display.HdrCapabilities মাধ্যমে সমর্থন করে তবে তারা:

  • [সি -২-১] অবশ্যই এইচডিআর স্ট্যাটিক মেটাডেটা পার্সিং এবং হ্যান্ডলিং সমর্থন করতে হবে।

যদি ডিভাইস বাস্তবায়নগুলি MediaCodecInfo.CodecCapabilities ক্লাসে FEATURE_IntraRefresh মাধ্যমে ইন্ট্রা রিফ্রেশ সমর্থনকে বিজ্ঞাপন দেয় তবে তারা:

  • [C-3-1] MUST support the refresh periods in the range of 10 - 60 frames and accurately operate within 20% of configured refresh period.

Unless the application specifies otherwise using the KEY_COLOR_FORMAT format key, video decoder implementations:

  • [C-4-1] MUST default to the color format optimized for hardware display if configured using Surface output.
  • [C-4-2] MUST default to a YUV420 8:8:8 color format optimized for CPU reading if configured to not use Surface output.

5.1.8। ভিডিও কোডেক তালিকা

ফর্ম্যাট/কোডেক বিস্তারিত File Types/Container Formats to be supported
H.263
  • 3 জিপিপি (.3 জিপি)
  • এমপিইজি -4 (.এমপি 4)
  • Matroska (.mkv, decode only)
এইচ .264 এভিসি বিশদের জন্য বিভাগ 5.2 এবং 5.3 দেখুন
  • 3 জিপিপি (.3 জিপি)
  • এমপিইজি -4 (.এমপি 4)
  • MPEG-2 TS (.ts, not seekable)
  • Matroska (.mkv, decode only)
এইচ .265 এইচইভিসি বিশদের জন্য বিভাগ 5.3 দেখুন
  • এমপিইজি -4 (.এমপি 4)
  • Matroska (.mkv, decode only)
MPEG-2 প্রধান প্রোফাইল
  • MPEG2-TS (.ts, not seekable)
  • MPEG-4 (.mp4, decode only)
  • Matroska (.mkv, decode only)
এমপিইজি -4 এসপি
  • 3 জিপিপি (.3 জিপি)
  • এমপিইজি -4 (.এমপি 4)
  • Matroska (.mkv, decode only)
VP8 বিশদের জন্য বিভাগ 5.2 এবং 5.3 দেখুন
VP9 বিশদের জন্য বিভাগ 5.3 দেখুন

5.1.9. Media Codec Security

Device implementations MUST ensure compliance with media codec security features as described below.

Android includes support for OMX, a cross-platform multimedia acceleration API, as well as Codec 2.0, a low-overhead multimedia acceleration API.

If device implementations support multimedia, they:

  • [C-1-1] MUST provide support for media codecs either via OMX or Codec 2.0 APIs (or both) as in the Android Open Source Project and not disable or circumvent the security protections. This specifically does not mean that every codec MUST use either the OMX or Codec 2.0 API, only that support for at least one of these APIs MUST be available, and support for the available APIs MUST include the security protections present.
  • [C-SR] Are STRONGLY RECOMMENDED to include support for Codec 2.0 API.

If device implementations do not support the Codec 2.0 API, they:

  • [C-2-1] MUST include the corresponding OMX software codec from the Android Open Source Project (if it is available) for each media format and type (encoder or decoder) supported by the device.
  • [C-2-2] Codecs that have names starting with "OMX.google." MUST be based on their Android Open Source Project source code.
  • [C-SR] Are STRONGLY RECOMMENDED that the OMX software codecs run in a codec process that does not have access to hardware drivers other than memory mappers.

If device implementations support Codec 2.0 API, they:

  • [C-3-1] MUST include the corresponding Codec 2.0 software codec from the Android Open Source Project (if it is available) for each media format and type (encoder or decoder) supported by the device.
  • [C-3-2] MUST house the Codec 2.0 software codecs in the software codec process as provided in the Android Open Source Project to make it possible to more narrowly grant access to software codecs.
  • [C-3-3] Codecs that have names starting with "c2.android." MUST be based on their Android Open Source Project source code.

5.1.10. Media Codec Characterization

If device implementations support media codecs, they:

  • [C-1-1] MUST return correct values of media codec characterization via the MediaCodecInfo API.

নির্দিষ্টভাবে:

  • [C-1-2] Codecs with names starting with "OMX." MUST use the OMX APIs and have names that conform to OMX IL naming guidelines.
  • [C-1-3] Codecs with names starting with "c2." MUST use the Codec 2.0 API and have names that conform to Codec 2.0 naming guidelines for Android.
  • [C-1-4] Codecs with names starting with "OMX.google." or "c2.android." MUST NOT be characterized as vendor or as hardware-accelerated.
  • [C-1-5] Codecs that run in a codec process (vendor or system) that have access to hardware drivers other than memory allocators and mappers MUST NOT be characterized as software-only.
  • [C-1-6] Codecs not present in the Android Open Source Project or not based on the source code in that project MUST be characterized as vendor.
  • [C-1-7] Codecs that utilize hardware acceleration MUST be characterized as hardware accelerated.
  • [C-1-8] Codec names MUST NOT be misleading. For example, codecs named "decoders" MUST support decoding, and those named "encoders" MUST support encoding. Codecs with names containing media formats MUST support those formats.

If device implementations support video codecs:

  • [C-2-1] All video codecs MUST publish achievable frame rate data for the following sizes if supported by the codec:
SD (low quality) SD (high quality) HD 720p HD 1080p ইউএইচডি
ভিডিও রেজল্যুশন
  • 176 x 144 px (H263, MPEG2, MPEG4)
  • 352 x 288 px (MPEG4 encoder, H263, MPEG2)
  • 320 x 180 px (VP8, VP8)
  • 320 x 240 px (other)
  • 704 x 576 px (H263)
  • 640 x 360 px (VP8, VP9)
  • 640 x 480 px (MPEG4 encoder)
  • 720 x 480 px (other)
  • 1408 x 1152 px (H263)
  • 1280 x 720 px (other)
1920 x 1080 px (other than MPEG4) 3840 x 2160 px (HEVC, VP9)
  • [C-2-2] Video codecs that are characterized as hardware accelerated MUST publish performance points information. They MUST each list all supported standard performance points (listed in PerformancePoint API), unless they are covered by another supported standard performance point.
  • Additionally they SHOULD publish extended performance points if they support sustained video performance other than one of the standard ones listed.

5.2। ভিডিও এনকোডিং

যদি ডিভাইস বাস্তবায়নগুলি কোনও ভিডিও এনকোডারকে সমর্থন করে এবং এটি তৃতীয় পক্ষের অ্যাপ্লিকেশনগুলিতে উপলব্ধ করে তোলে তবে তারা:

  • SHOULD NOT be, over two sliding windows, more than 15% over the bitrate between intraframe (I-frame) intervals.
  • SHOULD NOT be more than 100% over the bitrate over a sliding window of 1 second.

যদি ডিভাইস বাস্তবায়নে কমপক্ষে 2.5 ইঞ্চি তির্যক দৈর্ঘ্যের সাথে একটি এম্বেড থাকা স্ক্রিন ডিসপ্লে অন্তর্ভুক্ত থাকে বা একটি ভিডিও আউটপুট পোর্ট অন্তর্ভুক্ত থাকে বা android.hardware.camera.any ফিচার ফ্ল্যাগের মাধ্যমে একটি ক্যামেরার সমর্থন ঘোষণা করে, তারা:

  • [সি -1-1] অবশ্যই ভিপি 8 বা এইচ .264 ভিডিও এনকোডারগুলির মধ্যে কমপক্ষে একটির সমর্থন অন্তর্ভুক্ত করতে হবে এবং এটি তৃতীয় পক্ষের অ্যাপ্লিকেশনগুলির জন্য উপলব্ধ করতে হবে।
  • ভিপি 8 এবং এইচ .264 ভিডিও এনকোডার উভয়কেই সমর্থন করা উচিত এবং এটি তৃতীয় পক্ষের অ্যাপ্লিকেশনগুলির জন্য উপলব্ধ করা উচিত।

যদি ডিভাইস বাস্তবায়নগুলি এইচ .264, ভিপি 8, ভিপি 9 বা এইচইভিসি ভিডিও এনকোডারগুলির কোনওটিকে সমর্থন করে এবং এটি তৃতীয় পক্ষের অ্যাপ্লিকেশনগুলিতে উপলব্ধ করে তোলে, তারা:

  • [সি -২-১] অবশ্যই গতিশীলভাবে কনফিগারযোগ্য বিট্রেটকে সমর্থন করতে হবে।
  • পরিবর্তনশীল ফ্রেমের হারগুলি সমর্থন করা উচিত, যেখানে ভিডিও এনকোডারকে ইনপুট বাফারগুলির টাইমস্ট্যাম্পগুলির উপর ভিত্তি করে তাত্ক্ষণিক ফ্রেম সময়কাল নির্ধারণ করা উচিত এবং সেই ফ্রেমের সময়কালের ভিত্তিতে এর বিট বালতি বরাদ্দ করা উচিত।

যদি ডিভাইস বাস্তবায়নগুলি এমপিইজি -4 এসপি ভিডিও এনকোডারকে সমর্থন করে এবং এটি তৃতীয় পক্ষের অ্যাপ্লিকেশনগুলিতে উপলব্ধ করে তোলে, তারা:

  • সমর্থিত এনকোডারের জন্য গতিশীলভাবে কনফিগারযোগ্য বিটরেটগুলি সমর্থন করা উচিত।

If device implementations provide hardware accelerated video or image encoders, and support one or more attached or pluggable hardware camera(s) exposed through the android.camera APIs:

  • [C-4-1] all hardware accelerated video and image encoders MUST support encoding frames from the hardware camera(s).
  • SHOULD support encoding frames from the hardware camera(s) through all video or image encoders.

5.2.1। H.263

যদি ডিভাইস বাস্তবায়নগুলি H.263 এনকোডারগুলিকে সমর্থন করে এবং এটি তৃতীয় পক্ষের অ্যাপ্লিকেশনগুলিতে উপলব্ধ করে তোলে তবে তারা:

  • [সি -1-1] অবশ্যই বেসলাইন প্রোফাইল স্তর 45 সমর্থন করতে হবে।
  • সমর্থিত এনকোডারের জন্য গতিশীলভাবে কনফিগারযোগ্য বিটরেটগুলি সমর্থন করা উচিত।

5.2.2। H.264

যদি ডিভাইস বাস্তবায়নগুলি H.264 কোডেককে সমর্থন করে তবে তারা:

  • [সি -1-1] অবশ্যই বেসলাইন প্রোফাইল স্তর 3 সমর্থন করতে হবে 3. তবে, ASO (স্বেচ্ছাসেবী স্লাইস অর্ডারিং), এফএমও (নমনীয় ম্যাক্রোব্লক অর্ডারিং) এবং আরএস (অপ্রয়োজনীয় স্লাইস) এর জন্য সমর্থন al চ্ছিক। তদুপরি, অন্যান্য অ্যান্ড্রয়েড ডিভাইসের সাথে সামঞ্জস্যতা বজায় রাখতে, এটি সুপারিশ করা হয় যে এএসও, এফএমও এবং আরএস এনকোডারদের দ্বারা বেসলাইন প্রোফাইলের জন্য ব্যবহৃত হয় না।
  • [সি -1-2] অবশ্যই নিম্নলিখিত সারণীতে এসডি (স্ট্যান্ডার্ড সংজ্ঞা) ভিডিও এনকোডিং প্রোফাইলগুলি সমর্থন করতে হবে।
  • প্রধান প্রোফাইল স্তর 4 সমর্থন করা উচিত।
  • নিম্নলিখিত সারণীতে নির্দেশিত হিসাবে এইচডি (উচ্চ সংজ্ঞা) ভিডিও এনকোডিং প্রোফাইলগুলি সমর্থন করা উচিত।

যদি ডিভাইস বাস্তবায়নগুলি মিডিয়া এপিআইয়ের মাধ্যমে 720p বা 1080p রেজোলিউশন ভিডিওগুলির জন্য H.264 এনকোডিংয়ের সমর্থন প্রতিবেদন করে তবে তারা:

  • [সি -২-১] অবশ্যই নিম্নলিখিত টেবিলের এনকোডিং প্রোফাইলগুলি সমর্থন করতে হবে।
এসডি (নিম্ন মানের) এসডি (উচ্চ মানের) HD 720p HD 1080p
ভিডিও রেজল্যুশন 320 এক্স 240 পিএক্স 720 এক্স 480 পিএক্স 1280 x 720 পিএক্স 1920 x 1080 পিক্সেল
ভিডিও ফ্রেম রেট 20 fps 30 fps 30 fps 30 fps
ভিডিও বিট্রেট 384 কেবিপিএস 2 এমবিপিএস 4 এমবিপিএস 10 Mbps

5.2.3। VP8

যদি ডিভাইস বাস্তবায়নগুলি ভিপি 8 কোডেককে সমর্থন করে তবে তারা:

  • [সি -1-1] অবশ্যই এসডি ভিডিও এনকোডিং প্রোফাইলগুলি সমর্থন করতে হবে।
  • নিম্নলিখিত এইচডি (উচ্চ সংজ্ঞা) ভিডিও এনকোডিং প্রোফাইলগুলি সমর্থন করা উচিত।
  • [C-1-2] MUST support writing Matroska WebM files.
  • SHOULD provide a hardware VP8 codec that meets the WebM project RTC hardware coding requirements , to ensure acceptable quality of web video streaming and video-conference services.

যদি ডিভাইস বাস্তবায়নগুলি মিডিয়া এপিআইয়ের মাধ্যমে 720p বা 1080p রেজোলিউশন ভিডিওগুলির জন্য ভিপি 8 এনকোডিংয়ের সমর্থন প্রতিবেদন করে তবে তারা:

  • [সি -২-১] অবশ্যই নিম্নলিখিত টেবিলের এনকোডিং প্রোফাইলগুলি সমর্থন করতে হবে।
এসডি (নিম্ন মানের) এসডি (উচ্চ মানের) HD 720p HD 1080p
ভিডিও রেজল্যুশন 320 x 180 পিএক্স 640 x 360 পিএক্স 1280 x 720 পিএক্স 1920 x 1080 পিক্সেল
ভিডিও ফ্রেম রেট 30 fps 30 fps 30 fps 30 fps
ভিডিও বিট্রেট 800 কেবিপিএস 2 এমবিপিএস 4 এমবিপিএস 10 Mbps

5.2.4। VP9

যদি ডিভাইস বাস্তবায়নগুলি ভিপি 9 কোডেককে সমর্থন করে তবে তারা:

  • [C-1-2] MUST support Profile 0 Level 3.
  • [C-1-1] MUST support writing Matroska WebM files.
  • [C-1-3] MUST generate CodecPrivate data.
  • নিম্নলিখিত সারণীতে নির্দেশিত হিসাবে এইচডি ডিকোডিং প্রোফাইলগুলি সমর্থন করা উচিত।
  • [SR] are STRONGLY RECOMMENDED to support the HD decoding profiles as indicated in the following table if there is a hardware encoder.
এসডি HD 720p HD 1080p ইউএইচডি
ভিডিও রেজল্যুশন 720 এক্স 480 পিএক্স 1280 x 720 পিএক্স 1920 x 1080 পিক্সেল 3840 x 2160 পিএক্স
ভিডিও ফ্রেম রেট 30 fps 30 fps 30 fps 30 fps
ভিডিও বিট্রেট 1.6 এমবিপিএস 4 এমবিপিএস 5 এমবিপিএস 20 Mbps

If device implementations claim to support Profile 2 or Profile 3 through the Media APIs:

  • Support for 12-bit format is OPTIONAL.

5.2.5। H.265

যদি ডিভাইস বাস্তবায়নগুলি H.265 কোডেককে সমর্থন করে তবে তারা:

  • [C-1-1] MUST support Main Profile Level 3.
  • SHOULD support the HD encoding profiles as indicated in the following table.
  • [SR] are STRONGLY RECOMMENDED to support the HD encoding profiles as indicated in the following table if there is a hardware encoder.
এসডি HD 720p HD 1080p ইউএইচডি
ভিডিও রেজল্যুশন 720 এক্স 480 পিএক্স 1280 x 720 পিএক্স 1920 x 1080 পিক্সেল 3840 x 2160 পিএক্স
ভিডিও ফ্রেম রেট 30 fps 30 fps 30 fps 30 fps
ভিডিও বিট্রেট 1.6 এমবিপিএস 4 এমবিপিএস 5 এমবিপিএস 20 Mbps

5.3। ভিডিও ডিকোডিং

যদি ডিভাইস বাস্তবায়নগুলি ভিপি 8, ভিপি 9, এইচ .264, বা এইচ .265 কোডেককে সমর্থন করে তবে তারা:

  • [সি -1-1] অবশ্যই সমস্ত ভিপি 8, ভিপি 9, এইচ .264, এবং এইচ .265 কোডেকগুলির জন্য একই স্ট্রিমের মধ্যে স্ট্যান্ডার্ড অ্যান্ড্রয়েড এপিআইগুলির মাধ্যমে গতিশীল ভিডিও রেজোলিউশন এবং ফ্রেম রেট স্যুইচিং সমর্থন করতে হবে এবং রিয়েল টাইমে এবং সর্বাধিক রেজোলিউশন সমর্থিত সর্বাধিক রেজোলিউশন পর্যন্ত সমর্থন করে ডিভাইসে প্রতিটি কোডেক দ্বারা।

5.3.1। MPEG-2

যদি ডিভাইস বাস্তবায়নগুলি এমপিইজি -২ ডিকোডারগুলিকে সমর্থন করে তবে তারা:

  • [সি -1-1] অবশ্যই প্রধান প্রোফাইল উচ্চ স্তরের সমর্থন করতে হবে।

5.3.2। H.263

যদি ডিভাইস বাস্তবায়নগুলি H.263 ডিকোডারকে সমর্থন করে তবে তারা:

  • [সি -1-1] অবশ্যই বেসলাইন প্রোফাইল স্তর 30 এবং স্তর 45 সমর্থন করতে হবে।

5.3.3। MPEG-4

যদি এমপিইজি -4 ডিকোডারগুলির সাথে ডিভাইস বাস্তবায়ন হয় তবে তারা:

  • [সি -1-1] অবশ্যই সাধারণ প্রোফাইল স্তর 3 সমর্থন করতে হবে।

5.3.4। H.264

যদি ডিভাইস বাস্তবায়নগুলি H.264 ডিকোডারকে সমর্থন করে তবে তারা:

  • [সি -1-1] অবশ্যই প্রধান প্রোফাইল স্তর 3.1 এবং বেসলাইন প্রোফাইল সমর্থন করতে হবে। এএসও (স্বেচ্ছাসেবী স্লাইস অর্ডারিং), এফএমও (নমনীয় ম্যাক্রোব্লক অর্ডারিং) এবং আরএস (অপ্রয়োজনীয় স্লাইস) এর জন্য সমর্থন al চ্ছিক।
  • [সি -1-2] অবশ্যই নিম্নলিখিত টেবিলে তালিকাভুক্ত এসডি (স্ট্যান্ডার্ড সংজ্ঞা) প্রোফাইলগুলির সাথে ভিডিওগুলি ডিকোডিং করতে সক্ষম হতে হবে এবং বেসলাইন প্রোফাইল এবং প্রধান প্রোফাইল স্তর 3.1 (720p30 সহ) সহ এনকোড করা উচিত।
  • নিম্নলিখিত সারণীতে নির্দেশিত হিসাবে এইচডি (উচ্চ সংজ্ঞা) প্রোফাইলগুলির সাথে ভিডিওগুলি ডিকোড করতে সক্ষম হওয়া উচিত।

যদি Display.getSupportedModes() দ্বারা প্রতিবেদন করা হয় get

  • [সি -২-১] অবশ্যই নিম্নলিখিত সারণীতে এইচডি 720p ভিডিও ডিকোডিং প্রোফাইলগুলি সমর্থন করতে হবে।
  • [সি -২-২] অবশ্যই নিম্নলিখিত সারণীতে এইচডি 1080p ভিডিও ডিকোডিং প্রোফাইলগুলি সমর্থন করতে হবে।
এসডি (নিম্ন মানের) এসডি (উচ্চ মানের) HD 720p HD 1080p
ভিডিও রেজল্যুশন 320 এক্স 240 পিএক্স 720 এক্স 480 পিএক্স 1280 x 720 পিএক্স 1920 x 1080 পিক্সেল
ভিডিও ফ্রেম রেট 30 fps 30 fps 60 FPS 30 এফপিএস (60 এফপিএস টেলিভিশন )
ভিডিও বিট্রেট 800 কেবিপিএস 2 এমবিপিএস 8 এমবিপিএস 20 Mbps

5.3.5। H.265 (HEVC)

যদি ডিভাইস বাস্তবায়নগুলি H.265 কোডেককে সমর্থন করে তবে তারা:

  • [সি -1-1] নিম্নলিখিত সারণীতে উল্লিখিত হিসাবে প্রধান প্রোফাইল স্তর 3 প্রধান স্তর এবং এসডি ভিডিও ডিকোডিং প্রোফাইলগুলি সমর্থন করতে হবে।
  • নিম্নলিখিত সারণীতে নির্দেশিত হিসাবে এইচডি ডিকোডিং প্রোফাইলগুলি সমর্থন করা উচিত।
  • [সি -1-2] হার্ডওয়্যার ডিকোডার থাকলে নিম্নলিখিত টেবিলে নির্দেশিত হিসাবে এইচডি ডিকোডিং প্রোফাইলগুলি সমর্থন করতে হবে।

যদি Display.getSupportedModes() দ্বারা প্রতিবেদন করা হয় get

  • [সি -২-১] ডিভাইস বাস্তবায়নে অবশ্যই এইচ .265 বা ভিপি 9 ডিকোডিংয়ের কমপক্ষে একটিকে সমর্থন করতে হবে 720, 1080 এবং ইউএইচডি প্রোফাইল।
এসডি (নিম্ন মানের) এসডি (উচ্চ মানের) HD 720p HD 1080p ইউএইচডি
ভিডিও রেজল্যুশন 352 এক্স 288 পিএক্স 720 এক্স 480 পিএক্স 1280 x 720 পিএক্স 1920 x 1080 পিক্সেল 3840 x 2160 পিএক্স
ভিডিও ফ্রেম রেট 30 fps 30 fps 30 fps 30/60 এফপিএস ( এইচ .265 হার্ডওয়্যার ডিকোডিং সহ 60 এফপিএস টেলিভিশন ) 60 FPS
ভিডিও বিট্রেট 600 Kbps 1.6 এমবিপিএস 4 এমবিপিএস 5 এমবিপিএস 20 Mbps

If device implementations claim to support an HDR Profile through the Media APIs:

  • [C-3-1] Device implementations MUST accept the required HDR metadata from the application, as well as support extracting and outputting the required HDR metadata from the bitstream and/or container.
  • [C-3-2] Device implementations MUST properly display HDR content on the device screen or on a standard video output port (eg, HDMI).

5.3.6। VP8

যদি ডিভাইস বাস্তবায়নগুলি ভিপি 8 কোডেককে সমর্থন করে তবে তারা:

  • [সি -1-1] অবশ্যই নিম্নলিখিত সারণীতে এসডি ডিকোডিং প্রোফাইলগুলি সমর্থন করতে হবে।
  • প্রয়োজনীয়তাগুলি পূরণ করে এমন একটি হার্ডওয়্যার ভিপি 8 কোডেক ব্যবহার করা উচিত।
  • নিম্নলিখিত সারণীতে এইচডি ডিকোডিং প্রোফাইলগুলি সমর্থন করা উচিত।

যদি ডিসপ্লে দ্বারা রিপোর্ট করা Display.getSupportedModes() পদ্ধতিটি ভিডিও রেজোলিউশনের চেয়ে সমান বা বৃহত্তর, তবে:

  • [সি -২-১] ডিভাইস বাস্তবায়নগুলি অবশ্যই নিম্নলিখিত সারণীতে 720p প্রোফাইলগুলিকে সমর্থন করতে হবে।
  • [সি -২-২] ডিভাইস বাস্তবায়নগুলি অবশ্যই নিম্নলিখিত সারণীতে 1080p প্রোফাইলগুলিকে সমর্থন করতে হবে।
এসডি (নিম্ন মানের) এসডি (উচ্চ মানের) HD 720p HD 1080p
ভিডিও রেজল্যুশন 320 x 180 পিএক্স 640 x 360 পিএক্স 1280 x 720 পিএক্স 1920 x 1080 পিক্সেল
ভিডিও ফ্রেম রেট 30 fps 30 fps 30 এফপিএস (60 এফপিএস টেলিভিশন ) 30 (60 এফপিএস টেলিভিশন )
ভিডিও বিট্রেট 800 কেবিপিএস 2 এমবিপিএস 8 এমবিপিএস 20 Mbps

5.3.7। VP9

যদি ডিভাইস বাস্তবায়নগুলি ভিপি 9 কোডেককে সমর্থন করে তবে তারা:

  • [সি -1-1] নিম্নলিখিত টেবিলটিতে নির্দেশিত হিসাবে এসডি ভিডিও ডিকোডিং প্রোফাইলগুলি সমর্থন করতে হবে।
  • নিম্নলিখিত সারণীতে নির্দেশিত হিসাবে এইচডি ডিকোডিং প্রোফাইলগুলি সমর্থন করা উচিত।

যদি ডিভাইস বাস্তবায়নগুলি ভিপি 9 কোডেক এবং একটি হার্ডওয়্যার ডিকোডারকে সমর্থন করে:

  • [সি -২-১] নিম্নলিখিত সারণীতে নির্দেশিত হিসাবে এইচডি ডিকোডিং প্রোফাইলগুলি সমর্থন করতে হবে।

যদি Display.getSupportedModes() দ্বারা প্রতিবেদন করা হয় get

  • [সি -৩-১] ডিভাইস বাস্তবায়নগুলি অবশ্যই 720, 1080 এবং ইউএইচডি প্রোফাইলগুলির ভিপি 9 বা এইচ .265 ডিকোডিংয়ের কমপক্ষে একটি সমর্থন করতে হবে।
এসডি (নিম্ন মানের) এসডি (উচ্চ মানের) HD 720p HD 1080p ইউএইচডি
ভিডিও রেজল্যুশন 320 x 180 পিএক্স 640 x 360 পিএক্স 1280 x 720 পিএক্স 1920 x 1080 পিক্সেল 3840 x 2160 পিএক্স
ভিডিও ফ্রেম রেট 30 fps 30 fps 30 fps 30 এফপিএস ( ভিপি 9 হার্ডওয়্যার ডিকোডিং সহ 60 এফপিএস টেলিভিশন ) 60 FPS
ভিডিও বিট্রেট 600 Kbps 1.6 এমবিপিএস 4 এমবিপিএস 5 এমবিপিএস 20 Mbps

If device implementations claim to support VP9Profile2 or VP9Profile3 through the 'CodecProfileLevel' media APIs:

  • Support for 12-bit format is OPTIONAL.

If device implementations claim to support an HDR Profile ( VP9Profile2HDR , VP9Profile2HDR10Plus , VP9Profile3HDR , VP9Profile3HDR10Plus ) through the media APIs:

  • [C-4-1] Device implementations MUST accept the required HDR metadata ( KEY_HDR_STATIC_INFO for all HDR profiles, as well as 'KEY_HDR10_PLUS_INFO' for HDR10Plus profiles) from the application. They also MUST support extracting and outputting the required HDR metadata from the bitstream and/or container.
  • [C-4-2] Device implementations MUST properly display HDR content on the device screen or on a standard video output port (eg, HDMI).

৫.৩.৮। ডলবি ভিশন

যদি ডিভাইস বাস্তবায়নগুলি HDR_TYPE_DOLBY_VISION মাধ্যমে ডলবি ভিশন ডিকোডারের পক্ষে সমর্থন ঘোষণা করে, তারা:

  • [C-1-1] MUST provide a Dolby Vision-capable extractor.
  • [C-1-2] MUST properly display Dolby Vision content on the device screen or on a standard video output port (eg, HDMI).
  • [C-1-3] MUST set the track index of backward-compatible base-layer(s) (if present) to be the same as the combined Dolby Vision layer's track index.

৫.৩.৯। AV1

If device implementations support AV1 codec, they:

  • [C-1-1] MUST support Profile 0 including 10-bit content.

5.4। অডিও রেকর্ডিং

যদিও এই বিভাগে বর্ণিত কিছু প্রয়োজনীয়তা অ্যান্ড্রয়েড ৪.৩ এর পর থেকে তালিকাভুক্ত করা হয়েছে, ভবিষ্যতের সংস্করণগুলির জন্য সামঞ্জস্যতা সংজ্ঞাটি এগুলিকে অবশ্যই পরিবর্তন করার পরিকল্পনা করা হয়েছে। বিদ্যমান এবং নতুন অ্যান্ড্রয়েড ডিভাইসগুলি এই প্রয়োজনীয়তাগুলি পূরণ করার জন্য দৃ strongly ়ভাবে সুপারিশ করা হয় যা তালিকাভুক্ত হওয়া উচিত, বা ভবিষ্যতের সংস্করণে আপগ্রেড করার সময় তারা অ্যান্ড্রয়েডের সামঞ্জস্যতা অর্জন করতে সক্ষম হবে না।

5.4.1। Raw Audio Capture and Microphone Information

যদি ডিভাইস বাস্তবায়নগুলি android.hardware.microphone ঘোষণা করে তবে তারা:

  • [সি -1-1] অবশ্যই নিম্নলিখিত বৈশিষ্ট্যগুলি সহ কাঁচা অডিও সামগ্রী ক্যাপচারের অনুমতি দিতে হবে:

    • ফর্ম্যাট : লিনিয়ার পিসিএম, 16-বিট
    • Sampling rates : 8000, 11025, 16000, 44100, 48000 Hz
    • চ্যানেল : মনো
  • SHOULD allow capture of raw audio content with the following characteristics:

    • Format : Linear PCM, 16-bit and 24-bit
    • Sampling rates : 8000, 11025, 16000, 22050, 24000, 32000, 44100, 48000 Hz
    • Channels : As many channels as the number of microphones on the device
  • [সি -1-2] আপ-স্যাম্পলিং ছাড়াই উপরের নমুনা হারের উপরে ক্যাপচার করতে হবে।

  • [সি -১-৩] উপরে বর্ণিত নমুনার হারগুলি ডাউন-স্যাম্পলিং দিয়ে ক্যাপচার করা হলে অবশ্যই একটি উপযুক্ত অ্যান্টি-এলিয়াসিং ফিল্টার অন্তর্ভুক্ত করতে হবে।
  • কাঁচা অডিও সামগ্রীর এএম রেডিও এবং ডিভিডি মানের ক্যাপচারের অনুমতি দেওয়া উচিত, যার অর্থ নিম্নলিখিত বৈশিষ্ট্যগুলি:

    • ফর্ম্যাট : লিনিয়ার পিসিএম, 16-বিট
    • নমুনা হার : 22050, 48000 হার্জেড
    • চ্যানেল : স্টেরিও
    • [C-1-4] MUST honor the MicrophoneInfo API and properly fill in information for the available microphones on device accessible to the third-party applications via the AudioManager.getMicrophones() API, and the currently active microphones which are accessible to the third party applications via the AudioRecord.getActiveMicrophones() and MediaRecorder.getActiveMicrophones() APIs. যদি ডিভাইস বাস্তবায়নগুলি এএম রেডিও এবং কাঁচা অডিও সামগ্রীর ডিভিডি মানের ক্যাপচারের অনুমতি দেয় তবে তারা:
  • [সি -2-1] 16000: 22050 বা 44100: 48000 এর চেয়ে বেশি কোনও অনুপাতের উপর আপ-স্যাম্পলিং ছাড়াই ক্যাপচার করতে হবে।

  • [সি -২-২] অবশ্যই কোনও আপ-স্যাম্পলিং বা ডাউন-স্যাম্পলিংয়ের জন্য একটি উপযুক্ত অ্যান্টি-এলিয়াসিং ফিল্টার অন্তর্ভুক্ত করতে হবে।

5.4.2। ভয়েস রিকগনিশনের জন্য ক্যাপচার করুন

যদি ডিভাইস বাস্তবায়নগুলি android.hardware.microphone ঘোষণা করে তবে তারা:

  • [সি -১-১] অবশ্যই android.media.MediaRecorder.AudioSource.VOICE_RECOGNITION অডিও উত্সটি স্যাম্পলিং হারের একটিতে, 44100 এবং 48000 অবশ্যই ক্যাপচার করতে হবে।
  • [সি -1-2] AudioSource.VOICE_RECOGNITION অডিও উত্স থেকে একটি অডিও স্ট্রিম রেকর্ড করার সময় ডিফল্টরূপে কোনও শব্দ হ্রাস অডিও প্রসেসিং অক্ষম করতে হবে।
  • [সি -১-৩] AudioSource.VOICE_RECOGNITION অডিও উত্স থেকে অডিও স্ট্রিম রেকর্ড করার সময় ডিফল্টরূপে কোনও স্বয়ংক্রিয় লাভ নিয়ন্ত্রণ অক্ষম করতে হবে।
  • প্রায় ফ্ল্যাট প্রশস্ততা বনাম ফ্রিকোয়েন্সি বৈশিষ্ট্যগুলির সাথে ভয়েস রিকগনিশন অডিও স্ট্রিমটি রেকর্ড করা উচিত: বিশেষত, ± 3 ডিবি, 100 হার্জ থেকে 4000 হার্জেড থেকে।
  • ইনপুট সংবেদনশীলতা সেট সহ ভয়েস রিকগনিশন অডিও স্ট্রিমটি রেকর্ড করা উচিত যাতে 90 ডিবি সাউন্ড পাওয়ার লেভেল (এসপিএল) উত্স 1000 হার্জেডে 16-বিট নমুনার জন্য 2500 এর আরএমএস দেয়।
  • ভয়েস রিকগনিশন অডিও স্ট্রিমটি রেকর্ড করা উচিত যাতে পিসিএম প্রশস্ততা স্তরগুলি রৈখিকভাবে ট্র্যাক ইনপুট এসপিএলকে মাইক্রোফোনে -18 ডিবি থেকে +12 ডিবি আরই 90 ডিবি এসপিএল থেকে কমপক্ষে 30 ডিবি রেঞ্জের উপরে পরিবর্তন করে।
  • মাইক্রোফোনে 90 ডিবি এসপিএল ইনপুট স্তরে 1 কেএইচজেডের জন্য 1% এর চেয়ে কম হারমোনিক বিকৃতি (টিএইচডি) সহ ভয়েস স্বীকৃতি অডিও স্ট্রিমটি রেকর্ড করা উচিত।

যদি ডিভাইস বাস্তবায়নগুলি android.hardware.microphone এবং শব্দ দমন (হ্রাস) প্রযুক্তিগুলি বক্তৃতা স্বীকৃতির জন্য সুরযুক্ত ঘোষণা করে তবে তারা:

  • [C-2-1] MUST allow this audio effect to be controllable with the android.media.audiofx.NoiseSuppressor API.
  • [C-2-2] MUST uniquely identify each noise suppression technology implementation via the AudioEffect.Descriptor.uuid field.

5.4.3। প্লেব্যাকের পুনরায় রাউটিংয়ের জন্য ক্যাপচার করুন

android.media.MediaRecorder.AudioSource ক্লাসে REMOTE_SUBMIX অডিও উত্স অন্তর্ভুক্ত রয়েছে।

যদি ডিভাইস বাস্তবায়নগুলি android.hardware.audio.output এবং android.hardware.microphone উভয়ই ঘোষণা করে তবে তারা:

  • [সি -1-1] অবশ্যই REMOTE_SUBMIX অডিও উত্সটি যথাযথভাবে প্রয়োগ করতে হবে যাতে কোনও অ্যাপ্লিকেশন যখন এই অডিও উত্স থেকে রেকর্ড করতে android.media.AudioRecord এপিআই ব্যবহার করে, এটি নিম্নলিখিতগুলি বাদে সমস্ত অডিও স্ট্রিমের মিশ্রণ ধারণ করে:

    • AudioManager.STREAM_RING
    • AudioManager.STREAM_ALARM
    • AudioManager.STREAM_NOTIFICATION

5.4.4। Acoustic Echo Canceler

যদি ডিভাইস বাস্তবায়নগুলি android.hardware.microphone ঘোষণা করে তবে তারা:

  • SHOULD implement an Acoustic Echo Canceler (AEC) technology tuned for voice communication and applied to the capture path when capturing using AudioSource.VOICE_COMMUNICATION

If device implementations provides an Acoustic Echo Canceler which is inserted in the capture audio path when AudioSource.VOICE_COMMUNICATION is selected, they:

5.4.5। Concurrent Capture

If device implementations declare android.hardware.microphone ,they MUST implement concurrent capture as described in this document . বিশেষভাবে:

  • [C-1-1] MUST allow concurrent access to microphone by an accessibility service capturing with AudioSource.VOICE_RECOGNITION and at least one application capturing with any AudioSource .
  • [C-1-2] MUST allow concurrent access to microphone by a pre-installed application that holds an Assistant role and at least one application capturing with any AudioSource except for AudioSource.VOICE_COMMUNICATION or AudioSource.CAMCORDER .
  • [C-1-3] MUST silence the audio capture for any other application, except for an accessibility service, while an application is capturing with AudioSource.VOICE_COMMUNICATION or AudioSource.CAMCORDER . However, when an app is capturing via AudioSource.VOICE_COMMUNICATION then another app can capture the voice call if it is a privileged (pre-installed) app with permission CAPTURE_AUDIO_OUTPUT .
  • [C-1-4] If two or more applications are capturing concurrently and if neither app has an UI on top, the one that started capture the most recently receives audio.

5.4.6। Microphone Gain Levels

যদি ডিভাইস বাস্তবায়নগুলি android.hardware.microphone ঘোষণা করে তবে তারা:

  • SHOULD exhibit approximately flat amplitude-versus-frequency characteristics in the mid-frequency range: specifically ±3dB from 100 Hz to 4000 Hz for each and every microphone used to record the voice recognition audio source.
  • SHOULD set audio input sensitivity such that a 1000 Hz sinusoidal tone source played at 90 dB Sound Pressure Level (SPL) yields a response with RMS of 2500 for 16 bit-samples (or -22.35 dB Full Scale for floating point/double precision samples) for each and every microphone used to record the voice recognition audio source.
  • [C-SR] are STRONGLY RECOMMENDED to exhibit amplitude levels in the low frequency range: specifically from ±20 dB from 5 Hz to 100 Hz compared to the mid-frequency range for each and every microphone used to record the voice recognition audio source.
  • [C-SR] are STRONGLY RECOMMENDED to exhibit amplitude levels in the high frequency range: specifically from ±30 dB from 4000 Hz to 22 KHz compared to the mid-frequency range for each and every microphone used to record the voice recognition audio source.

5.5। অডিও প্লেব্যাক

অ্যান্ড্রয়েডে বিভাগ 7.8.2 -এ সংজ্ঞায়িত হিসাবে অডিও আউটপুট পেরিফেরালের মাধ্যমে অ্যাপ্লিকেশনগুলিকে প্লেব্যাক অডিও প্লেব্যাক করার অনুমতি দেওয়ার জন্য সহায়তা অন্তর্ভুক্ত রয়েছে।

5.5.1। কাঁচা অডিও প্লেব্যাক

যদি ডিভাইস বাস্তবায়নগুলি android.hardware.audio.output ঘোষণা করে তবে তারা:

  • [সি -1-1] অবশ্যই নিম্নলিখিত বৈশিষ্ট্যগুলি সহ কাঁচা অডিও সামগ্রীর প্লেব্যাকের অনুমতি দিতে হবে:

    • Source formats : Linear PCM, 16-bit, 8-bit, float
    • Channels : Mono, Stereo, valid multichannel configurations with up to 8 channels
    • Sampling rates (in Hz) :
      • 8000, 11025, 16000, 22050, 32000, 44100, 48000 at the channel configurations listed above
      • 96000 in mono and stereo
  • নিম্নলিখিত বৈশিষ্ট্যগুলি সহ কাঁচা অডিও সামগ্রীর প্লেব্যাকের অনুমতি দেওয়া উচিত:

    • নমুনা হার : 24000, 48000

5.5.2। অডিও প্রভাব

অ্যান্ড্রয়েড ডিভাইস বাস্তবায়নের জন্য অডিও প্রভাবগুলির জন্য একটি এপিআই সরবরাহ করে।

যদি ডিভাইস বাস্তবায়নগুলি android.hardware.audio.output বৈশিষ্ট্যটি ঘোষণা করে তবে তারা:

  • [C-1-1] MUST support the EFFECT_TYPE_EQUALIZER and EFFECT_TYPE_LOUDNESS_ENHANCER implementations controllable through the AudioEffect subclasses Equalizer and LoudnessEnhancer .
  • [সি -1-2] Visualizer শ্রেণীর মাধ্যমে নিয়ন্ত্রণযোগ্য ভিজ্যুয়ালাইজার এপিআই বাস্তবায়নকে সমর্থন করতে হবে।
  • [C-1-3] MUST support the EFFECT_TYPE_DYNAMICS_PROCESSING implementation controllable through the AudioEffect subclass DynamicsProcessing .
  • EFFECT_TYPE_BASS_BOOST বুস্ট, EFFECT_TYPE_ENV_REVERB , EFFECT_TYPE_PRESET_REVERB , এবং EFFECT_TYPE_VIRTUALIZER বাস্তবায়নগুলি AudioEffect সাব-ক্লাস BassBoost , EnvironmentalReverb , PresetReverb এবং Virtualizer মাধ্যমে নিয়ন্ত্রণযোগ্য।
  • [C-SR] Are STRONGLY RECOMMENDED to support effects in floating-point and multichannel.

5.5.3। অডিও আউটপুট ভলিউম

স্বয়ংচালিত ডিভাইস বাস্তবায়ন:

  • অডিওঅ্যাট্রিবিউটস এবং সিএআর অডিও ব্যবহার দ্বারা সংজ্ঞায়িত সামগ্রী প্রকার android.car.CarAudioManager ব্যবহার ব্যবহার করে প্রতিটি অডিও স্ট্রিমের জন্য পৃথকভাবে অডিও ভলিউম সামঞ্জস্য করার অনুমতি দেওয়া উচিত and

5.6। অডিও লেটেন্সি

অডিও লেটেন্সি হ'ল অডিও সিগন্যাল কোনও সিস্টেমের মধ্য দিয়ে যাওয়ার সাথে সাথে সময় বিলম্ব। রিয়েল-টাইম সাউন্ড এফেক্টগুলি অর্জনের জন্য অ্যাপ্লিকেশনগুলির অনেক শ্রেণি সংক্ষিপ্ত বিলম্বের উপর নির্ভর করে।

এই বিভাগের উদ্দেশ্যে, নিম্নলিখিত সংজ্ঞাগুলি ব্যবহার করুন:

  • আউটপুট বিলম্ব । যখন কোনও অ্যাপ্লিকেশন পিসিএম-কোডেড ডেটার একটি ফ্রেম লেখেন এবং এর মধ্যে ব্যবধানটি যখন কোনও অন-ডিভাইস ট্রান্সডুসার বা সিগন্যালে পরিবেশে উপস্থাপিত হয় তখন ডিভাইসটিকে একটি পোর্টের মাধ্যমে ছেড়ে দেয় এবং বাহ্যিকভাবে পর্যবেক্ষণ করা যায়।
  • ঠান্ডা আউটপুট বিলম্ব । প্রথম ফ্রেমের জন্য আউটপুট ল্যাটেন্সি, যখন অডিও আউটপুট সিস্টেমটি অনুরোধের আগে নিষ্ক্রিয় এবং চালিত হয়।
  • অবিচ্ছিন্ন আউটপুট বিলম্ব । ডিভাইসটি অডিও খেলার পরে পরবর্তী ফ্রেমগুলির জন্য আউটপুট ল্যাটেন্সি।
  • ইনপুট বিলম্ব । যখন একটি শব্দের দ্বারা ডিভাইসে একটি অন-ডিভাইস ট্রান্সডুসার বা সিগন্যালে কোনও শব্দ উপস্থাপন করা হয় তার মধ্যে ব্যবধানটি কোনও পোর্টের মাধ্যমে ডিভাইসে প্রবেশ করে এবং যখন কোনও অ্যাপ্লিকেশন পিসিএম-কোডেড ডেটার সংশ্লিষ্ট ফ্রেমটি পড়ে।
  • হারানো ইনপুট একটি ইনপুট সিগন্যালের প্রাথমিক অংশ যা ব্যবহারযোগ্য বা অনুপলব্ধ।
  • ঠান্ডা ইনপুট বিলম্ব । প্রথম ফ্রেমের জন্য হারানো ইনপুট সময় এবং ইনপুট ল্যাটেন্সির যোগফল, যখন অডিও ইনপুট সিস্টেমটি অনুরোধের আগে অলস এবং চালিত হয়।
  • অবিচ্ছিন্ন ইনপুট বিলম্ব । পরবর্তী ফ্রেমের জন্য ইনপুট বিলম্বিতা, যখন ডিভাইসটি অডিও ক্যাপচার করছে।
  • cold output jitter . ঠান্ডা আউটপুট বিলম্বিত মানগুলির পৃথক পরিমাপের মধ্যে পরিবর্তনশীলতা।
  • ঠান্ডা ইনপুট জিটার । ঠান্ডা ইনপুট বিলম্বিত মানগুলির পৃথক পরিমাপের মধ্যে পরিবর্তনশীলতা।
  • অবিচ্ছিন্ন রাউন্ড ট্রিপ বিলম্ব । অবিচ্ছিন্ন ইনপুট লেটেন্সি প্লাস অবিচ্ছিন্ন আউটপুট ল্যাটেন্সি প্লাস একটি বাফার সময়কাল। বাফার পিরিয়ড অ্যাপ্লিকেশনটির জন্য অ্যাপ্লিকেশনটিকে ইনপুট এবং আউটপুট স্ট্রিমগুলির মধ্যে পর্যায়ের পার্থক্য হ্রাস করার জন্য সিগন্যাল এবং সময় প্রক্রিয়া করার সময় দেয়।
  • ওপেনএসএল ইএস পিসিএম বাফার সারি এপিআইঅ্যান্ড্রয়েড এনডিকে- র মধ্যে পিসিএম-সম্পর্কিত ওপেনস্ল এস এপিআইগুলির সেট।
  • এওডিও নেটিভ অডিও এপিআইঅ্যান্ড্রয়েড এনডিকে -র মধ্যে এওডিও এপিআইগুলির সেট।
  • Timestamp . A pair consisting of a relative frame position within a stream and the estimated time when that frame enters or leaves the audio processing pipeline on the associated endpoint. See also AudioTimestamp .
  • glitch . A temporary interruption or incorrect sample value in the audio signal, typically caused by a buffer underrun for output, buffer overrun for input, or any other source of digital or analog noise.

If device implementations declare android.hardware.audio.output , they MUST meet or exceed the following requirements:

  • [C-1-1] The output timestamp returned by AudioTrack.getTimestamp and AAudioStream_getTimestamp is accurate to +/- 2 ms.
  • [C-1-2] Cold output latency of 500 milliseconds or less.

যদি ডিভাইস বাস্তবায়নগুলি android.hardware.audio.output ঘোষণা করে তবে তাদের দৃ strongly ়ভাবে নিম্নলিখিত প্রয়োজনীয়তাগুলি পূরণ বা অতিক্রম করার জন্য সুপারিশ করা হয়:

  • [C-SR] Cold output latency of 100 milliseconds or less. Existing and new devices that run this version of Android are VERY STRONGLY RECOMMENDED to meet these requirements now. In a future platform release in 2021, we will require Cold output latency of 200 ms or less as a MUST.
  • [C-SR] Continuous output latency of 45 milliseconds or less.
  • [C-SR] Minimize the cold output jitter.
  • [C-SR] The output timestamp returned by AudioTrack.getTimestamp and AAudioStream_getTimestamp is accurate to +/- 1 ms.

If device implementations meet the above requirements, after any initial calibration, when using both the OpenSL ES PCM buffer queue and AAudio native audio APIs, for continuous output latency and cold output latency over at least one supported audio output device, they are:

If device implementations do not meet the requirements for low-latency audio via both the OpenSL ES PCM buffer queue and AAudio native audio APIs, they:

  • [C-2-1] MUST NOT report support for low-latency audio.

If device implementations include android.hardware.microphone , they MUST meet these input audio requirements:

  • [C-3-1] Limit the error in input timestamps, as returned by AudioRecord.getTimestamp or AAudioStream_getTimestamp , to +/- 2 ms. "Error" here means the deviation from the correct value.
  • [C-3-2] Cold input latency of 500 milliseconds or less.

যদি ডিভাইস বাস্তবায়নে android.hardware.microphone অন্তর্ভুক্ত থাকে তবে তাদের এই ইনপুট অডিও প্রয়োজনীয়তাগুলি পূরণ করার জন্য দৃ strongly ়ভাবে সুপারিশ করা হয়:

  • [C-SR] Cold input latency of 100 milliseconds or less. Existing and new devices that run this version of Android are VERY STRONGLY RECOMMENDED to meet these requirements now. In a future platform release in 2021 we will require Cold input latency of 200 ms or less as a MUST.
  • [C-SR] Continuous input latency of 30 milliseconds or less.
  • [C-SR] Continuous round-trip latency of 50 milliseconds or less.
  • [C-SR] Minimize the cold input jitter.
  • [C-SR] Limit the error in input timestamps, as returned by AudioRecord.getTimestamp or AAudioStream_getTimestamp , to +/- 1 ms.

৫.৭। নেটওয়ার্ক প্রোটোকল

ডিভাইস বাস্তবায়নগুলি অবশ্যই অ্যান্ড্রয়েড এসডিকে ডকুমেন্টেশনে উল্লিখিত অডিও এবং ভিডিও প্লেব্যাকের জন্য মিডিয়া নেটওয়ার্ক প্রোটোকলগুলিকে সমর্থন করতে হবে।

যদি ডিভাইস বাস্তবায়নে কোনও অডিও বা ভিডিও ডিকোডার অন্তর্ভুক্ত থাকে তবে তারা:

  • [সি -1-1] অবশ্যই এইচটিটিপি (গুলি) এর মাধ্যমে বিভাগ 5.1 এ প্রয়োজনীয় সমস্ত কোডেক এবং ধারক ফর্ম্যাটগুলিকে সমর্থন করতে হবে।

  • [C-1-2] MUST support the media segment formats shown in the Media Segment Formats table below over HTTP Live Streaming draft protocol, Version 7 .

  • [সি -1-3] নীচের আরটিএসপি টেবিলে নিম্নলিখিত আরটিপি অডিও ভিডিও প্রোফাইল এবং সম্পর্কিত কোডেকগুলি সমর্থন করতে হবে। ব্যতিক্রমগুলির জন্য দয়া করে বিভাগ 5.1 এ টেবিল পাদটীকাগুলি দেখুন।

মিডিয়া বিভাগের ফর্ম্যাট

বিভাগ ফর্ম্যাট রেফারেন্স(গুলি) প্রয়োজনীয় কোডেক সমর্থন
এমপিইজি -২ পরিবহন স্ট্রিম আইএসও 13818 ভিডিও কোডেক:
  • এইচ 264 এভিসি
  • এমপিইজি -4 এসপি
  • MPEG-2
H264 এভিসি, এমপিইজি 2-4 এসপি, বিশদগুলির জন্য বিভাগ 5.1.3 দেখুন
এবং এমপিইজি -২।

অডিও কোডেকস:

  • এএসি
এএসি এবং এর রূপগুলির বিশদগুলির জন্য বিভাগ 5.1.1 দেখুন।
এএসিএস ফ্রেমিং এবং আইডি 3 ট্যাগ সহ এএসি আইএসও 13818-7 এএসি এবং এর রূপগুলির বিশদগুলির জন্য বিভাগ 5.1.1 দেখুন
ওয়েবভিটিটি ওয়েবভিটিটি

আরটিএসপি (আরটিপি, এসডিপি)

প্রোফাইল নাম রেফারেন্স(গুলি) প্রয়োজনীয় কোডেক সমর্থন
এইচ 264 এভিসি আরএফসি 6184 H264 এভিসি সম্পর্কিত বিশদগুলির জন্য বিভাগ 5.1.3 দেখুন
এমপি 4 এ-ল্যাটম আরএফসি 6416 এএসি এবং এর রূপগুলির বিশদগুলির জন্য বিভাগ 5.1.1 দেখুন
H263-1998 আরএফসি 3551
আরএফসি 4629
আরএফসি 2190
H263 এ বিশদগুলির জন্য বিভাগ 5.1.3 দেখুন
H263-2000 আরএফসি 4629 H263 এ বিশদগুলির জন্য বিভাগ 5.1.3 দেখুন
এএমআর আরএফসি 4867 এএমআর-এনবি সম্পর্কিত বিশদগুলির জন্য বিভাগ 5.1.1 দেখুন
AMR-WB আরএফসি 4867 এএমআর-ডাব্লুবি সম্পর্কিত বিশদগুলির জন্য বিভাগ 5.1.1 দেখুন
এমপি 4 ভি-এস আরএফসি 6416 এমপিইজি -4 এসপিতে বিশদগুলির জন্য বিভাগ 5.1.3 দেখুন
এমপিইজি 4-জেনারিক আরএফসি 3640 এএসি এবং এর রূপগুলির বিশদগুলির জন্য বিভাগ 5.1.1 দেখুন
এমপি 2 টি আরএফসি 2250 বিশদগুলির জন্য HTTP লাইভ স্ট্রিমিংয়ের নীচে এমপিইজি -2 পরিবহন স্ট্রিম দেখুন

৫.৮। নিরাপদ মিডিয়া

যদি ডিভাইস বাস্তবায়নগুলি সুরক্ষিত ভিডিও আউটপুট সমর্থন করে এবং সুরক্ষিত পৃষ্ঠগুলিকে সমর্থন করতে সক্ষম হয় তবে তারা:

  • [সি -1-1] অবশ্যই Display.FLAG_SECURE জন্য সমর্থন ঘোষণা করতে হবে।

যদি ডিভাইস বাস্তবায়নগুলি Display.FLAG_SECURE এবং ওয়্যারলেস ডিসপ্লে প্রোটোকলের জন্য সমর্থন ঘোষণা করে, তারা:

  • [সি -২-১] মিরাকাস্টের মতো ওয়্যারলেস প্রোটোকলের মাধ্যমে সংযুক্ত ডিসপ্লেগুলির জন্য এইচডিসিপি ২.x বা উচ্চতর হিসাবে একটি ক্রিপ্টোগ্রাফিকভাবে শক্তিশালী প্রক্রিয়া সহ লিঙ্কটি সুরক্ষিত করতে হবে।

যদি ডিভাইস বাস্তবায়নগুলি Display.FLAG_SECURE এবং তারযুক্ত বাহ্যিক প্রদর্শন সমর্থন করার জন্য সমর্থন ঘোষণা করে, তারা:

  • [C-3-1] MUST support HDCP 1.2 or higher for all external displays connected via a user-accessible wired port.

৫.৯। বাদ্যযন্ত্র ডিজিটাল ইন্টারফেস (MIDI)

If device implementations report support for feature android.software.midi via the android.content.pm.PackageManager class, they:

  • [C-1-1] MUST support MIDI over all MIDI-capable hardware transports for which they provide generic non-MIDI connectivity, where such transports are:

  • [C-1-2] MUST support the inter-app MIDI software transport (virtual MIDI devices)

  • [C-1-3] MUST include libamidi.so (native MIDI support)

  • SHOULD support MIDI over USB peripheral mode, section 7.7

5.10। পেশাদার অডিও

যদি ডিভাইস বাস্তবায়নগুলি android.content.pm.packagemanager ক্লাসের মাধ্যমে android.hardware.audio.pro বৈশিষ্ট্যটির জন্য সমর্থন প্রতিবেদন করে তবে তারা:

  • [সি -1-1] অবশ্যই বৈশিষ্ট্যটি android.hardware.audio.low_latency জন্য সমর্থন প্রতিবেদন করতে হবে।
  • [সি -১-২] অবশ্যই অবিচ্ছিন্ন রাউন্ড-ট্রিপ অডিও ল্যাটেন্সি থাকতে হবে, যেমন বিভাগ 5.6 অডিও ল্যাটেন্সিতে সংজ্ঞায়িত করা হয়েছে, অবশ্যই 20 মিলিসেকেন্ড বা তারও কম হওয়া উচিত এবং কমপক্ষে একটি সমর্থিত পাথের চেয়ে 10 মিলিসেকেন্ড বা তারও কম হওয়া উচিত।
  • [সি -1-3] অবশ্যই ইউএসবি হোস্ট মোড এবং ইউএসবি পেরিফেরিয়াল মোড সমর্থনকারী একটি ইউএসবি পোর্ট (গুলি) অন্তর্ভুক্ত করতে হবে।
  • [সি -1-4] অবশ্যই android.software.midi বৈশিষ্ট্যটির জন্য সমর্থন রিপোর্ট করতে হবে।
  • [C-1-5] MUST meet latencies and USB audio requirements using both the OpenSL ES PCM buffer queue API and at least one path of the AAudio native audio API.
  • [SR] Are STRONGLY RECOMMENDED to meet latencies and USB audio requirements using the AAudio native audio API over the MMAP path .
  • [C-1-6] MUST have Cold output latency of 200 milliseconds or less.
  • [C-1-7] MUST have Cold input latency of 200 milliseconds or less.
  • [SR] Are STRONGLY RECOMMENDED to provide a consistent level of CPU performance while audio is active and CPU load is varying. This should be tested using the Android app version of SynthMark commit id 09b13c6f49ea089f8c31e5d035f912cc405b7ab8 . SynthMark uses a software synthesizer running on a simulated audio framework that measures system performance. The SynthMark app needs to be run using the “Automated Test” option and achieve the following results:
    • voicemark.90 >= 32 voices
    • latencymark.fixed.little <= 15 msec
    • latencymark.dynamic.little <= 50 msec

See the SynthMark documentation for an explanation of the benchmarks.

  • স্ট্যান্ডার্ড সময়ের সাথে সম্পর্কিত অডিও ঘড়ির অসম্পূর্ণতা এবং ড্রিফ্টকে হ্রাস করা উচিত।
  • উভয় সক্রিয় থাকাকালীন সিপিইউ CLOCK_MONOTONIC তুলনায় অডিও ক্লক ড্রিফ্টকে হ্রাস করা উচিত।
  • অন-ডিভাইস ট্রান্সডুসারদের উপর অডিও লেটেন্সি হ্রাস করা উচিত।
  • ইউএসবি ডিজিটাল অডিওর চেয়ে অডিও বিলম্বকে হ্রাস করা উচিত।
  • সমস্ত পাথের উপর অডিও বিলম্বিত পরিমাপের নথিভুক্ত করা উচিত।
  • অডিও বাফার সমাপ্তি কলব্যাক প্রবেশের সময়গুলিতে জিটারকে হ্রাস করা উচিত, কারণ এটি কলব্যাকের মাধ্যমে পূর্ণ সিপিইউ ব্যান্ডউইথের ব্যবহারযোগ্য শতাংশকে প্রভাবিত করে।
  • SHOULD provide zero audio glitches under normal use at reported latency.
  • শূন্য আন্তঃ-চ্যানেল বিলম্বিত পার্থক্য সরবরাহ করা উচিত।
  • সমস্ত পরিবহণের চেয়ে এমআইডিআই মানে বিলম্বকে হ্রাস করা উচিত।
  • সমস্ত পরিবহণের উপর লোড (জিটার) এর অধীনে এমআইডিআই লেটেন্সি পরিবর্তনশীলতা হ্রাস করা উচিত।
  • সমস্ত পরিবহণের উপর সঠিক এমআইডিআই টাইমস্ট্যাম্প সরবরাহ করা উচিত।
  • শীতল শুরুর পরপরই সময়কাল সহ অন-ডিভাইস ট্রান্সডুসারদের অডিও সিগন্যাল শব্দটি হ্রাস করা উচিত।
  • উভয় সক্রিয় থাকলে সংশ্লিষ্ট শেষ-পয়েন্টগুলির ইনপুট এবং আউটপুট পক্ষের মধ্যে শূন্য অডিও ঘড়ির পার্থক্য সরবরাহ করা উচিত। সংশ্লিষ্ট শেষ-পয়েন্টগুলির উদাহরণগুলির মধ্যে রয়েছে অন-ডিভাইস মাইক্রোফোন এবং স্পিকার, বা অডিও জ্যাক ইনপুট এবং আউটপুট।
  • উভয় সক্রিয় থাকাকালীন একই থ্রেডে ইনপুট এবং আউটপুট পক্ষের জন্য অডিও বাফার সমাপ্তি কলব্যাকগুলি পরিচালনা করা উচিত এবং ইনপুট কলব্যাক থেকে ফিরে আসার পরপরই আউটপুট কলব্যাকটি প্রবেশ করুন। বা যদি একই থ্রেডে কলব্যাকগুলি পরিচালনা করা সম্ভব হয় না, তবে ইনপুট এবং আউটপুট পক্ষের একটি ধারাবাহিক সময় থাকার জন্য অ্যাপ্লিকেশনটিকে অনুমতি দেওয়ার জন্য ইনপুট কলব্যাক প্রবেশের খুব শীঘ্রই আউটপুট কলব্যাকটি প্রবেশ করুন।
  • ইনপুট এবং সংশ্লিষ্ট শেষ-পয়েন্টগুলির আউটপুট পক্ষের জন্য এইচএল অডিও বাফারিংয়ের মধ্যে পর্বের পার্থক্য হ্রাস করা উচিত।
  • স্পর্শ বিলম্বতা হ্রাস করা উচিত।
  • লোড (জিটার) এর অধীনে টাচ লেটেন্সি পরিবর্তনশীলতা হ্রাস করা উচিত।
  • SHOULD have a latency from touch input to audio output of less than or equal to 40 ms.

যদি ডিভাইস বাস্তবায়নগুলি উপরের সমস্ত প্রয়োজনীয়তা পূরণ করে তবে তারা:

  • [এসআর] android.content.pm.PackageManager ক্লাসের মাধ্যমে বৈশিষ্ট্য android.hardware.audio.pro এর জন্য সমর্থন রিপোর্ট করার জন্য দৃ strongly ়ভাবে সুপারিশ করা হয়েছে।

যদি ডিভাইস বাস্তবায়নে 4 টি কন্ডাক্টর 3.5 মিমি অডিও জ্যাক অন্তর্ভুক্ত থাকে তবে তারা:

  • [সি -২-১] অডিও জ্যাক পাথের চেয়ে 20 মিলিসেকেন্ড বা তার চেয়ে কম হওয়ার জন্য অবিচ্ছিন্ন রাউন্ড-ট্রিপ অডিও ল্যাটেন্সি থাকতে হবে।
  • [এসআর] তারযুক্ত অডিও হেডসেট স্পেসিফিকেশন (v1.1) এর বিভাগ মোবাইল ডিভাইস (জ্যাক) স্পেসিফিকেশন মেনে চলার জন্য দৃ strongly ়ভাবে সুপারিশ করা হয়েছে।
  • অবিচ্ছিন্ন রাউন্ড-ট্রিপ অডিও লেটেন্সিটি অডিও জ্যাক পাথের তুলনায় 10 মিলিসেকেন্ড বা তার চেয়ে কম হওয়া উচিত।

If device implementations omit a 4 conductor 3.5mm audio jack and include a USB port(s) supporting USB host mode, they:

  • [C-3-1] MUST implement the USB audio class.
  • [C-3-2] MUST have a continuous round-trip audio latency of 20 milliseconds or less over the USB host mode port using USB audio class.
  • অবিচ্ছিন্ন রাউন্ড-ট্রিপ অডিও ল্যাটেন্সিটি ইউএসবি অডিও ক্লাস ব্যবহার করে ইউএসবি হোস্ট মোড পোর্টের তুলনায় 10 মিলিসেকেন্ড বা তার চেয়ে কম হওয়া উচিত।
  • [C-SR] Are STRONGLY RECOMMENDED to support simultaneous I/O up to 8 channels each direction, 96 kHz sample rate, and 24-bit or 32-bit depth, when used with USB audio peripherals that also support these requirements.

যদি ডিভাইস বাস্তবায়নে কোনও এইচডিএমআই পোর্ট অন্তর্ভুক্ত থাকে তবে তারা:

  • SHOULD support output in stereo and eight channels at 20-bit or 24-bit depth and 192 kHz without bit-depth loss or resampling, in at least one configuration.

5.11। আনপ্রসেসড জন্য ক্যাপচার

অ্যান্ড্রয়েডে android.media.MediaRecorder.AudioSource.UNPROCESSED অডিও উত্সের মাধ্যমে অপ্রকাশিত অডিও রেকর্ডিংয়ের জন্য সমর্থন অন্তর্ভুক্ত। ওপেনএসএল এস -এ, এটি রেকর্ড প্রিসেট SL_ANDROID_RECORDING_PRESET_UNPROCESSED ইউএনপ্রসেসড দিয়ে অ্যাক্সেস করা যায়।

যদি ডিভাইস বাস্তবায়নগুলি অপরিশোধিত অডিও উত্সকে সমর্থন করার এবং এটি তৃতীয় পক্ষের অ্যাপ্লিকেশনগুলিতে উপলব্ধ করে তোলে তবে তারা:

  • [সি -1-1] অবশ্যই android.media.AudioManager প্রপার্টি_সুপোর্ট_আডিয়ো_সোর্স_অনপ্রসেসডের মাধ্যমে সমর্থনটি রিপোর্ট করতে হবে।

  • [সি -১-২] অবশ্যই মধ্য ফ্রিকোয়েন্সি পরিসরে প্রায় সমতল প্রশস্ততা-বনাম-ফ্রিকোয়েন্সি বৈশিষ্ট্যগুলি প্রদর্শন করতে হবে: বিশেষত ur ্য অডিও উত্স রেকর্ড করতে ব্যবহৃত প্রতিটি মাইক্রোফোনের জন্য 100 হার্জ থেকে 7000 হার্জেড থেকে 10 ডিবি 10 ডিবি।

  • [সি -1-3] অবশ্যই কম ফ্রিকোয়েন্সি পরিসরে প্রশস্ততা স্তরগুলি প্রদর্শন করতে হবে: বিশেষত অপ্রত্যাশিত অডিও উত্সটি রেকর্ড করতে ব্যবহৃত প্রতিটি মাইক্রোফোনের জন্য মধ্য-ফ্রিকোয়েন্সি রেঞ্জের তুলনায় 5 হার্জ থেকে 20 ডিবি থেকে 100 হার্জেড থেকে।

  • [সি -1-4] অবশ্যই উচ্চ ফ্রিকোয়েন্সি পরিসরে প্রশস্ততা স্তরগুলি প্রদর্শন করতে হবে: বিশেষত ± 30 ডিবি থেকে 7000 হার্জ থেকে 22 কেএইচজেড থেকে 22 কেজি হার্জ থেকে মধ্য ফ্রিকোয়েন্সি রেঞ্জের তুলনায় প্রতিটি মাইক্রোফোনটি অপ্রকাশিত অডিও উত্স রেকর্ড করতে ব্যবহৃত হয়।

  • [সি -1-5] অবশ্যই অডিও ইনপুট সংবেদনশীলতা সেট করতে হবে যে 1000 হার্জ সাইনোসয়েডাল টোন উত্স 94 ডিবি সাউন্ড প্রেসার লেভেল (এসপিএল) এ খেলেছে 16 বিট-নমুনাগুলির জন্য 520 এর আরএমএসের সাথে একটি প্রতিক্রিয়া দেয় (বা -36 ডিবি পূর্ণ স্কেল অপ্রকাশিত অডিও উত্সটি রেকর্ড করতে ব্যবহৃত প্রতিটি মাইক্রোফোনের জন্য ভাসমান পয়েন্ট/ডাবল নির্ভুলতার নমুনা)।

  • [সি -1-6] অপ্রকাশিত অডিও উত্সটি রেকর্ড করতে ব্যবহৃত প্রতিটি মাইক্রোফোনের জন্য 60 ডিবি বা উচ্চতর জন্য একটি সিগন্যাল-টু-শয়েজ অনুপাত (এসএনআর) থাকতে হবে। (যেখানে এসএনআর 94 ডিবি এসপিএল এবং স্ব-শব্দের সমতুল্য এসপিএল, এ-ওজনযুক্ত সমতুল্য এসপিএল এর মধ্যে পার্থক্য হিসাবে পরিমাপ করা হয়)।

  • [সি -১-7] অবশ্যই অ-অকার্যকর অডিও উত্সটি রেকর্ড করতে ব্যবহৃত প্রতিটি মাইক্রোফোনে 90 ডিবি এসপিএল ইনপুট স্তরে 1 কেএইচজেডের জন্য 1% এর চেয়ে কম হতে হবে মোট সুরেলা বিকৃতি (টিএইচডি) থাকতে হবে।

  • স্তরটিকে কাঙ্ক্ষিত পরিসরে আনতে স্তরের গুণক ব্যতীত অন্য কোনও পথে অন্য কোনও সিগন্যাল প্রসেসিং (যেমন স্বয়ংক্রিয় লাভ নিয়ন্ত্রণ, উচ্চ পাস ফিল্টার, বা ইকো বাতিলকরণ) থাকতে হবে না। অন্য কথায়:

  • [সি -1-8] যদি কোনও সংকেত প্রক্রিয়াকরণ কোনও কারণে আর্কিটেকচারে উপস্থিত থাকে তবে এটি অবশ্যই অক্ষম করা উচিত এবং কার্যকরভাবে শূন্য বিলম্ব বা সিগন্যাল পাথের অতিরিক্ত বিলম্বের পরিচয় দিতে হবে।
  • [সি -1-9] স্তরের গুণকটি, যখন পথে যেতে দেওয়া হয়েছিল, অবশ্যই সংকেত পথে বিলম্ব বা বিলম্বের পরিচয় দিতে হবে না।

সমস্ত এসপিএল পরিমাপ পরীক্ষার অধীনে মাইক্রোফোনের পাশে সরাসরি তৈরি করা হয়। একাধিক মাইক্রোফোন কনফিগারেশনের জন্য, এই প্রয়োজনীয়তাগুলি প্রতিটি মাইক্রোফোনে প্রযোজ্য।

যদি ডিভাইস বাস্তবায়নগুলি android.hardware.microphone ঘোষণা করে তবে অপ্রকাশিত অডিও উত্স সমর্থন করে না, তারা:

  • [সি -২-১] AudioManager.getProperty(PROPERTY_SUPPORT_AUDIO_SOURCE_UNPROCESSED) এপিআই পদ্ধতিটির জন্য null ফিরে আসতে হবে, সমর্থনটির অভাবকে সঠিকভাবে নির্দেশ করতে।
  • [এসআর] এখনও অপরিবর্তিত রেকর্ডিং উত্সের সিগন্যাল পাথের প্রয়োজনীয়তাগুলি পূরণ করার জন্য এখনও দৃ strongly ়ভাবে সুপারিশ করা হয়।

6. বিকাশকারীর সরঞ্জাম এবং বিকল্পগুলির সামঞ্জস্য

6.1। ডেভেলপার টুলস

ডিভাইস বাস্তবায়ন:

  • [সি -0-1] অবশ্যই অ্যান্ড্রয়েড এসডিকে প্রদত্ত অ্যান্ড্রয়েড বিকাশকারী সরঞ্জামগুলিকে সমর্থন করতে হবে।
  • অ্যান্ড্রয়েড ডিবাগ ব্রিজ (এডিবি)

    • [C-0-2] MUST support adb as documented in the Android SDK and the shell commands provided in the AOSP, which can be used by app developers, including dumpsys cmd stats
    • [C-0-11] MUST support the shell command cmd testharness . Upgrading device implementations from an earlier Android version without a persistent data block MAY be exempted from C-0-11.
    • [C-0-3] MUST NOT alter the format or the contents of device system events (batterystats , diskstats, fingerprint, graphicsstats, netstats, notification, procstats) logged via the dumpsys command.
    • [C-0-10] MUST record, without omission, and make the following events accessible and available to the cmd stats shell command and the StatsManager System API class.
      • ActivityForegroundStateChanged
      • AnomalyDetected
      • AppBreadcrumbReported
      • AppCrashOccurred
      • AppStartOccurred
      • BatteryLevelChanged
      • BatterySaverModeStateChanged
      • BleScanResultReceived
      • BleScanStateChanged
      • ChargingStateChanged
      • DeviceIdleModeStateChanged
      • ForegroundServiceStateChanged
      • GpsScanStateChanged
      • JobStateChanged
      • PluggedStateChanged
      • ScheduledJobStateChanged
      • ScreenStateChanged
      • SyncStateChanged
      • SystemElapsedRealtime
      • UidProcessStateChanged
      • WakelockStateChanged
      • WakeupAlarmOccurred
      • WifiLockStateChanged
      • WifiMulticastLockStateChanged
      • WifiScanStateChanged
    • [সি -0-4] অবশ্যই ডিভাইস-সাইড এডিবি ডেমনটি ডিফল্টরূপে নিষ্ক্রিয় হওয়া উচিত এবং অ্যান্ড্রয়েড ডিবাগ ব্রিজটি চালু করার জন্য অবশ্যই একটি ব্যবহারকারী-অ্যাক্সেসযোগ্য প্রক্রিয়া থাকতে হবে।
    • [সি -0-5] অবশ্যই সুরক্ষিত এডিবি সমর্থন করতে হবে। অ্যান্ড্রয়েডে সুরক্ষিত এডিবির জন্য সমর্থন অন্তর্ভুক্ত রয়েছে। সুরক্ষিত এডিবি পরিচিত অনুমোদিত হোস্টগুলিতে এডিবি সক্ষম করে।
    • [সি -0-6] অবশ্যই একটি হোস্ট মেশিন থেকে এডিবি সংযুক্ত হওয়ার অনুমতি দেওয়ার একটি প্রক্রিয়া সরবরাহ করতে হবে। বিশেষভাবে:

    If device implementations without a USB port support peripheral mode, they:

    • [C-3-1] MUST implement adb via local-area network (such as Ethernet or Wi-Fi).
    • [C-3-2] MUST provide drivers for Windows 7, 8 and 10, allowing developers to connect to the device using the adb protocol.

    If device implementations support adb connections to a host machine via Wi-Fi, they:

    • [C-4-1] MUST have the AdbManager#isAdbWifiSupported() method return true .

    If device implementations support adb connections to a host machine via Wi-Fi and includes at least one camera, they:

    • [C-5-1] MUST have the AdbManager#isAdbWifiQrSupported() method return true .
  • ডালভিক ডিবাগ মনিটর পরিষেবা (ডিডিএমএস)

    • [সি -0-7] অ্যান্ড্রয়েড এসডিকে নথিভুক্ত হিসাবে সমস্ত ডিডিএম বৈশিষ্ট্যগুলিকে সমর্থন করতে হবে। যেহেতু ডিডিএমএস এডিবি ব্যবহার করে, ডিডিএমএসের জন্য সমর্থন ডিফল্টরূপে নিষ্ক্রিয় হওয়া উচিত, তবে যখনই ব্যবহারকারী উপরের মতো অ্যান্ড্রয়েড ডিবাগ ব্রিজটি সক্রিয় করে রাখেন তখন অবশ্যই এটি সমর্থন করা উচিত।
  • বানর
    • [সি -0-8] অবশ্যই বানরের কাঠামো অন্তর্ভুক্ত করতে হবে এবং অ্যাপ্লিকেশনগুলি ব্যবহারের জন্য এটি উপলব্ধ করতে হবে।
  • Systrace
    • [C-0-9] MUST support the systrace tool as documented in the Android SDK. সিরস্ট্রেস অবশ্যই ডিফল্টরূপে নিষ্ক্রিয় হতে হবে এবং সিলস্ট্রেস চালু করার জন্য একটি ব্যবহারকারী-অ্যাক্সেসযোগ্য প্রক্রিয়া থাকতে হবে।
  • পারফেটো
    • [C-SR] Are STRONGLY RECOMMENDED to expose a /system/bin/perfetto binary to the shell user which cmdline complies with the perfetto documentation .
    • [C-SR] The perfetto binary is STRONGLY RECOMMENDED to accept as input a protobuf config that complies with the schema defined in the perfetto documentation .
    • [C-SR] The perfetto binary is STRONGLY RECOMMENDED to write as output a protobuf trace that complies with the schema defined in the perfetto documentation .
    • [C-SR] Are STRONGLY RECOMMENDED to provide, through the perfetto binary, at least the data sources described in the perfetto documentation .
  • Low Memory Killer
    • [C-0-10] MUST write a LMK_KILL_OCCURRED_FIELD_NUMBER Atom to the statsd log when an app is terminated by the Low Memory Killer .
  • Test Harness Mode If device implementations support the shell command cmd testharness and run cmd testharness enable , they:
    • [C-2-1] MUST return true for ActivityManager.isRunningInUserTestHarness()
    • [C-2-2] MUST implement Test Harness Mode as described in Test Harness Mode documentation .

If device implementations report the support of Vulkan 1.0 or higher via the android.hardware.vulkan.version feature flags, they:

  • [C-1-1] MUST provide an affordance for the app developer to enable/disable GPU debug layers.
  • [C-1-2] MUST, when the GPU debug layers are enabled, enumerate layers in libraries provided by external tools (ie not part of the platform or application package) found in debuggable applications' base directory to support vkEnumerateInstanceLayerProperties() and vkCreateInstance() API methods.

6.2। বিকাশকারী বিকল্প

অ্যান্ড্রয়েডে অ্যাপ্লিকেশন বিকাশ-সম্পর্কিত সেটিংস কনফিগার করার জন্য বিকাশকারীদের সমর্থন অন্তর্ভুক্ত রয়েছে।

ডিভাইস বাস্তবায়নগুলি অবশ্যই বিকাশকারী বিকল্পগুলির জন্য একটি ধারাবাহিক অভিজ্ঞতা সরবরাহ করতে হবে, তারা:

  • [সি -0-1] অবশ্যই অ্যান্ড্রয়েড.সেটেটিংগুলি সম্মান করতে হবে app অ্যাপ্লিকেশন বিকাশ-সম্পর্কিত সেটিংস দেখানোর উদ্দেশ্যে আন্ডার্রয়েড.অ্যাপ্লিকেশন_ ডেভেলপমেন্ট_সেটটিংসের অভিপ্রায়। The upstream Android implementation hides the Developer Options menu by default and enables users to launch Developer Options after pressing seven (7) times on the Settings > About Device > Build Number menu item.
  • [C-0-2] MUST hide Developer Options by default.
  • [C-0-3] MUST provide a clear mechanism that does not give preferential treatment to one third-party app as opposed to another to enable Developer Options. MUST provide a public visible document or website that describes how to enable Developer Options. This document or website MUST be linkable from the Android SDK documents.
  • SHOULD have an ongoing visual notification to the user when Developer Options is enabled and the safety of the user is of concern.
  • MAY temporarily limit access to the Developer Options menu, by visually hiding or disabling the menu, to prevent distraction for scenarios where the safety of the user is of concern.

7. হার্ডওয়্যার সামঞ্জস্য

If a device includes a particular hardware component that has a corresponding API for third-party developers:

  • [C-0-1] The device implementation MUST implement that API as described in the Android SDK documentation.

If an API in the SDK interacts with a hardware component that is stated to be optional and the device implementation does not possess that component:

  • [C-0-2] Complete class definitions (as documented by the SDK) for the component APIs MUST still be presented.
  • [C-0-3] The API's behaviors MUST be implemented as no-ops in some reasonable fashion.
  • [C-0-4] API methods MUST return null values where permitted by the SDK documentation.
  • [C-0-5] API methods MUST return no-op implementations of classes where null values are not permitted by the SDK documentation.
  • [C-0-6] API methods MUST NOT throw exceptions not documented by the SDK documentation.
  • [C-0-7] Device implementations MUST consistently report accurate hardware configuration information via the getSystemAvailableFeatures() and hasSystemFeature(String) methods on the android.content.pm.PackageManager class for the same build fingerprint.

A typical example of a scenario where these requirements apply is the telephony API: Even on non-phone devices, these APIs must be implemented as reasonable no-ops.

7.1। ডিসপ্লে এবং গ্রাফিক্স

Android includes facilities that automatically adjust application assets and UI layouts appropriately for the device to ensure that third-party applications run well on a variety of hardware configurations . On the Android-compatible display(s) where all third-party Android-compatible applications can run, device implementations MUST properly implement these APIs and behaviors, as detailed in this section.

The units referenced by the requirements in this section are defined as follows:

  • physical diagonal size . The distance in inches between two opposing corners of the illuminated portion of the display.
  • dots per inch (dpi) . The number of pixels encompassed by a linear horizontal or vertical span of 1”. Where dpi values are listed, both horizontal and vertical dpi must fall within the range.
  • আনুমানিক অনুপাত . The ratio of the pixels of the longer dimension to the shorter dimension of the screen. For example, a display of 480x854 pixels would be 854/480 = 1.779, or roughly “16:9”.
  • density-independent pixel (dp) . The virtual pixel unit normalized to a 160 dpi screen, calculated as: pixels = dps * (density/160).

7.1.1। স্ক্রিন কনফিগারেশন

7.1.1.1। Screen Size and Shape

The Android UI framework supports a variety of different logical screen layout sizes, and allows applications to query the current configuration's screen layout size via Configuration.screenLayout with the SCREENLAYOUT_SIZE_MASK and Configuration.smallestScreenWidthDp .

ডিভাইস বাস্তবায়ন:

  • [C-0-1] MUST report the correct layout size for the Configuration.screenLayout as defined in the Android SDK documentation. Specifically, device implementations MUST report the correct logical density-independent pixel (dp) screen dimensions as below:

    • Devices with the Configuration.uiMode set as any value other than UI_MODE_TYPE_WATCH, and reporting a small size for the Configuration.screenLayout , MUST have at least 426 dp x 320 dp.
    • Devices reporting a normal size for the Configuration.screenLayout , MUST have at least 480 dp x 320 dp.
    • Devices reporting a large size for the Configuration.screenLayout , MUST have at least 640 dp x 480 dp.
    • Devices reporting a xlarge size for the Configuration.screenLayout , MUST have at least 960 dp x 720 dp.
  • [C-0-2] MUST correctly honor applications' stated support for screen sizes through the < supports-screens > attribute in the AndroidManifest.xml, as described in the Android SDK documentation.

  • MAY have the Android-compatible display(s) with rounded corners.

If device implementations support UI_MODE_TYPE_NORMAL and include Android-compatible display(s) with rounded corners, they:

  • [C-1-1] MUST ensure that at least one of the following requirements is met:
  • The radius of the rounded corners is less than or equal to 38 dp.
  • When a 15 dp by 15 dp box is anchored at each corner of the logical display, at least one pixel of each box is visible on the screen.

  • SHOULD include user affordance to switch to the display mode with the rectangular corners.

If device implementations include an Android-compatible display(s) that is foldable, or includes a folding hinge between multiple display panels and makes such display(s) available to render third-party apps, they:

If device implementations include an Android-compatible display(s) that is foldable, or includes a folding hinge between multiple display panels and if the hinge or fold crosses a fullscreen application window, they:

  • [C-3-1] MUST report the position, bounds and state of hinge or fold through extensions or sidecar APIs to the application.

For details on correctly implementing the sidecar or extension APIs refer to the public documentation of Window Manager Jetpack .

7.1.1.2। স্ক্রীন অ্যাসপেক্ট রেশিও

While there is no restriction to the aspect ratio of the physical display for the Android-compatible display(s), the aspect ratio of the logical display where third-party apps are rendered, which can be derived from the height and width values reported through the view.Display APIs and Configuration APIs, MUST meet the following requirements:

  • [C-0-1] Device implementations with Configuration.uiMode set to UI_MODE_TYPE_NORMAL MUST have an aspect ratio value less than or equal to 1.86 (roughly 16:9), unless the app meets one of the following conditions:

  • [C-0-2] Device implementations with Configuration.uiMode set to UI_MODE_TYPE_NORMAL MUST have an aspect ratio value equal to or greater than 1.3333 (4:3), unless the app can be stretched wider by meeting one of the following conditions:

  • [C-0-3] Device implementations with the Configuration.uiMode set as UI_MODE_TYPE_WATCH MUST have an aspect ratio value set as 1.0 (1:1).

7.1.1.3। পর্দার ঘনত্ব

The Android UI framework defines a set of standard logical densities to help application developers target application resources.

  • [C-0-1] By default, device implementations MUST report only one of the Android framework densities that are listed on DisplayMetrics through the DENSITY_DEVICE_STABLE API and this value MUST NOT change at any time; however, the device MAY report a different arbitrary density according to the display configuration changes made by the user (for example, display size) set after initial boot.

  • Device implementations SHOULD define the standard Android framework density that is numerically closest to the physical density of the screen, unless that logical density pushes the reported screen size below the minimum supported. If the standard Android framework density that is numerically closest to the physical density results in a screen size that is smaller than the smallest supported compatible screen size (320 dp width), device implementations SHOULD report the next lowest standard Android framework density.

If there is an affordance to change the display size of the device:

  • [C-1-1] The display size MUST NOT be scaled any larger than 1.5 times the native density or produce an effective minimum screen dimension smaller than 320dp (equivalent to resource qualifier sw320dp), whichever comes first.
  • [C-1-2] Display size MUST NOT be scaled any smaller than 0.85 times the native density.
  • To ensure good usability and consistent font sizes, it is RECOMMENDED that the following scaling of Native Display options be provided (while complying with the limits specified above)
  • Small: 0.85x
  • Default: 1x (Native display scale)
  • Large: 1.15x
  • Larger: 1.3x
  • Largest 1.45x

7.1.2। ডিসপ্লে মেট্রিক্স

If device implementations include the Android-compatible display(s) or video output to the Android-compatible display screen(s), they:

If device implementations does not include an embedded screen or video output, they:

  • [C-2-1] MUST report correct values of the Android-compatible display as defined in the android.util.DisplayMetrics API for the emulated default view.Display .

7.1.3। স্ক্রিন ওরিয়েন্টেশন

ডিভাইস বাস্তবায়ন:

  • [C-0-1] MUST report which screen orientations they support ( android.hardware.screen.portrait and/or android.hardware.screen.landscape ) and MUST report at least one supported orientation. For example, a device with a fixed orientation landscape screen, such as a television or laptop, SHOULD only report android.hardware.screen.landscape .
  • [C-0-2] MUST report the correct value for the device's current orientation, whenever queried via the android.content.res.Configuration.orientation , android.view.Display.getOrientation() , or other APIs.

If device implementations support both screen orientations, they:

  • [C-1-1] MUST support dynamic orientation by applications to either portrait or landscape screen orientation. That is, the device must respect the application's request for a specific screen orientation.
  • [C-1-2] MUST NOT change the reported screen size or density when changing orientation.
  • MAY select either portrait or landscape orientation as the default.

7.1.4। 2D এবং 3D গ্রাফিক্স ত্বরণ

7.1.4.1 OpenGL ES

ডিভাইস বাস্তবায়ন:

  • [C-0-1] MUST correctly identify the supported OpenGL ES versions (1.1, 2.0, 3.0, 3.1, 3.2) through the managed APIs (such as via the GLES10.getString() method) and the native APIs.
  • [C-0-2] MUST include the support for all the corresponding managed APIs and native APIs for every OpenGL ES versions they identified to support.

যদি ডিভাইস বাস্তবায়নে একটি স্ক্রিন বা ভিডিও আউটপুট অন্তর্ভুক্ত থাকে, তারা:

  • [C-1-1] MUST support both OpenGL ES 1.1 and 2.0, as embodied and detailed in the Android SDK documentation .
  • [C-SR] Are STRONGLY RECOMMENDED to support OpenGL ES 3.1.
  • SHOULD support OpenGL ES 3.2.

If device implementations support any of the OpenGL ES versions, they:

  • [C-2-1] MUST report via the OpenGL ES managed APIs and native APIs any other OpenGL ES extensions they have implemented, and conversely MUST NOT report extension strings that they do not support.
  • [C-2-2] MUST support the EGL_KHR_image , EGL_KHR_image_base , EGL_ANDROID_image_native_buffer , EGL_ANDROID_get_native_client_buffer , EGL_KHR_wait_sync , EGL_KHR_get_all_proc_addresses , EGL_ANDROID_presentation_time , EGL_KHR_swap_buffers_with_damage , EGL_ANDROID_recordable , and EGL_ANDROID_GLES_layers extensions.
  • [C-SR] Are STRONGLY RECOMMENDED to support the EGL_KHR_partial_update and OES_EGL_image_external extensions.
  • SHOULD accurately report via the getString() method, any texture compression format that they support, which is typically vendor-specific.

If device implementations declare support for OpenGL ES 3.0, 3.1, or 3.2, they:

  • [C-3-1] MUST export the corresponding function symbols for these version in addition to the OpenGL ES 2.0 function symbols in the libGLESv2.so library.
  • [SR] Are STRONGLY RECOMMENDED to support the OES_EGL_image_external_essl3 extension.

If device implementations support OpenGL ES 3.2, they:

  • [C-4-1] MUST support the OpenGL ES Android Extension Pack in its entirety.

If device implementations support the OpenGL ES Android Extension Pack in its entirety, they:

  • [C-5-1] MUST identify the support through the android.hardware.opengles.aep feature flag.

If device implementations expose support for the EGL_KHR_mutable_render_buffer extension, they:

  • [C-6-1] MUST also support the EGL_ANDROID_front_buffer_auto_refresh extension.
7.1.4.2 Vulkan

Android includes support for Vulkan , a low-overhead, cross-platform API for high-performance 3D graphics.

If device implementations support OpenGL ES 3.1, they:

  • [SR] Are STRONGLY RECOMMENDED to include support for Vulkan 1.1.

যদি ডিভাইস বাস্তবায়নে একটি স্ক্রিন বা ভিডিও আউটপুট অন্তর্ভুক্ত থাকে, তারা:

  • SHOULD include support for Vulkan 1.1.

The Vulkan dEQP tests are partitioned into a number of test lists, each with an associated date/version. These are in the Android source tree at external/deqp/android/cts/main/vk-master-YYYY-MM-DD.txt . A device that supports Vulkan at a self-reported level indicates that it can pass the dEQP tests in all test lists from this level and earlier.

If device implementations include support for Vulkan 1.0 or higher, they:

  • [C-1-1] MUST report the correct integer value with the android.hardware.vulkan.level and android.hardware.vulkan.version feature flags.
  • [C-1-2] MUST enumerate, at least one VkPhysicalDevice for the Vulkan native API vkEnumeratePhysicalDevices() .
  • [C-1-3] MUST fully implement the Vulkan 1.0 APIs for each enumerated VkPhysicalDevice .
  • [C-1-4] MUST enumerate layers, contained in native libraries named as libVkLayer*.so in the application package's native library directory, through the Vulkan native APIs vkEnumerateInstanceLayerProperties() and vkEnumerateDeviceLayerProperties() .
  • [C-1-5] MUST NOT enumerate layers provided by libraries outside of the application package, or provide other ways of tracing or intercepting the Vulkan API, unless the application has the android:debuggable attribute set as true .
  • [C-1-6] MUST report all extension strings that they do support via the Vulkan native APIs , and conversely MUST NOT report extension strings that they do not correctly support.
  • [C-1-7] MUST support the VK_KHR_surface, VK_KHR_android_surface, VK_KHR_swapchain, and VK_KHR_incremental_present extensions.
  • [C-1-8] MUST report the maximum version of the Vulkan dEQP Tests supported via the android.software.vulkan.deqp.level feature flag.
  • [C-1-9] MUST at least support version 132317953 (from Mar 1st, 2019) as reported in the android.software.vulkan.deqp.level feature flag.
  • [C-1-10] MUST pass all Vulkan dEQP Tests in the test lists between version 132317953 and the version specified in the android.software.vulkan.deqp.level feature flag.
  • [C-SR] Are STRONGLY RECOMMENDED to support the VK_KHR_driver_properties and VK_GOOGLE_display_timing extensions.

If device implementations do not include support for Vulkan 1.0, they:

  • [C-2-1] MUST NOT declare any of the Vulkan feature flags (eg android.hardware.vulkan.level , android.hardware.vulkan.version ).
  • [C-2-2] MUST NOT enumerate any VkPhysicalDevice for the Vulkan native API vkEnumeratePhysicalDevices() .

If device implementations include support for Vulkan 1.1 and declare any of the Vulkan feature flags, they:

  • [C-3-1] MUST expose support for the SYNC_FD external semaphore and handle types and the VK_ANDROID_external_memory_android_hardware_buffer extension.
7.1.4.3 RenderScript
  • [C-0-1] Device implementations MUST support Android RenderScript , as detailed in the Android SDK documentation.
7.1.4.4 2D Graphics Acceleration

Android includes a mechanism for applications to declare that they want to enable hardware acceleration for 2D graphics at the Application, Activity, Window, or View level through the use of a manifest tag android:hardwareAccelerated or direct API calls.

ডিভাইস বাস্তবায়ন:

  • [C-0-1] MUST enable hardware acceleration by default, and MUST disable hardware acceleration if the developer so requests by setting android:hardwareAccelerated="false” or disabling hardware acceleration directly through the Android View APIs.
  • [C-0-2] MUST exhibit behavior consistent with the Android SDK documentation on hardware acceleration .

Android includes a TextureView object that lets developers directly integrate hardware-accelerated OpenGL ES textures as rendering targets in a UI hierarchy.

ডিভাইস বাস্তবায়ন:

  • [C-0-3] MUST support the TextureView API, and MUST exhibit consistent behavior with the upstream Android implementation.
7.1.4.5 Wide-gamut Displays

If device implementations claim support for wide-gamut displays through Configuration.isScreenWideColorGamut() , they:

  • [C-1-1] MUST have a color-calibrated display.
  • [C-1-2] MUST have a display whose gamut covers the sRGB color gamut entirely in CIE 1931 xyY space.
  • [C-1-3] MUST have a display whose gamut has an area of at least 90% of DCI-P3 in CIE 1931 xyY space.
  • [C-1-4] MUST support OpenGL ES 3.1 or 3.2 and report it properly.
  • [C-1-5] MUST advertise support for the EGL_KHR_no_config_context , EGL_EXT_pixel_format_float , EGL_KHR_gl_colorspace , EGL_EXT_gl_colorspace_scrgb , EGL_EXT_gl_colorspace_scrgb_linear , EGL_EXT_gl_colorspace_display_p3 , EGL_EXT_gl_colorspace_display_p3_linear , and EGL_EXT_gl_colorspace_display_p3_passthrough extensions.
  • [C-SR] Are STRONGLY RECOMMENDED to support GL_EXT_sRGB .

Conversely, if device implementations do not support wide-gamut displays, they:

  • [C-2-1] SHOULD cover 100% or more of sRGB in CIE 1931 xyY space, although the screen color gamut is undefined.

7.1.5। লিগ্যাসি অ্যাপ্লিকেশন সামঞ্জস্য মোড

Android specifies a “compatibility mode” in which the framework operates in a 'normal' screen size equivalent (320dp width) mode for the benefit of legacy applications not developed for old versions of Android that pre-date screen-size independence.

7.1.6। স্ক্রিন প্রযুক্তি

The Android platform includes APIs that allow applications to render rich graphics to an Android-compatible display. Devices MUST support all of these APIs as defined by the Android SDK unless specifically allowed in this document.

All of a device implementation's Android-compatible displays:

  • [C-0-1] MUST be capable of rendering 16-bit color graphics.
  • SHOULD support displays capable of 24-bit color graphics.
  • [C-0-2] MUST be capable of rendering animations.
  • [C-0-3] MUST have a pixel aspect ratio (PAR) between 0.9 and 1.15. That is, the pixel aspect ratio MUST be near square (1.0) with a 10 ~ 15% tolerance.

7.1.7। সেকেন্ডারি ডিসপ্লে

Android includes support for secondary Android-compatible displays to enable media sharing capabilities and developer APIs for accessing external displays.

If device implementations support an external display either via a wired, wireless, or an embedded additional display connection, they:

  • [C-1-1] MUST implement the DisplayManager system service and API as described in the Android SDK documentation.

7.2। ইনপুট ডিভাইস

ডিভাইস বাস্তবায়ন:

7.2.1। কীবোর্ড

If device implementations include support for third-party Input Method Editor (IME) applications, they:

Device implementations: * [C-0-1] MUST NOT include a hardware keyboard that does not match one of the formats specified in android.content.res.Configuration.keyboard (QWERTY or 12-key). * SHOULD include additional soft keyboard implementations. * MAY include a hardware keyboard.

7.2.2। নন-টাচ নেভিগেশন

Android includes support for d-pad, trackball, and wheel as mechanisms for non-touch navigation.

ডিভাইস বাস্তবায়ন:

If device implementations lack non-touch navigations, they:

  • [C-1-1] MUST provide a reasonable alternative user interface mechanism for the selection and editing of text, compatible with Input Management Engines. The upstream Android open source implementation includes a selection mechanism suitable for use with devices that lack non-touch navigation inputs.

7.2.3। নেভিগেশন কী

The Home , Recents , and Back functions typically provided via an interaction with a dedicated physical button or a distinct portion of the touch screen, are essential to the Android navigation paradigm and therefore, device implementations:

  • [C-0-1] MUST provide a user affordance to launch installed applications that have an activity with the <intent-filter> set with ACTION=MAIN and CATEGORY=LAUNCHER or CATEGORY=LEANBACK_LAUNCHER for Television device implementations. The Home function SHOULD be the mechanism for this user affordance.
  • SHOULD provide buttons for the Recents and Back function.

If the Home, Recents, or Back functions are provided, they:

  • [C-1-1] MUST be accessible with a single action (eg tap, double-click or gesture) when any of them are accessible.
  • [C-1-2] MUST provide a clear indication of which single action would trigger each function. Having a visible icon imprinted on the button, showing a software icon on the navigation bar portion of the screen, or walking the user through a guided step-by-step demo flow during the out-of-box setup experience are examples of such an ইঙ্গিত.

ডিভাইস বাস্তবায়ন:

  • [SR] are STRONGLY RECOMMENDED to not provide the input mechanism for the Menu function as it is deprecated in favor of action bar since Android 4.0.

If device implementations provide the Menu function, they:

  • [C-2-1] MUST display the action overflow button whenever the action overflow menu popup is not empty and the action bar is visible.
  • [C-2-2] MUST NOT modify the position of the action overflow popup displayed by selecting the overflow button in the action bar, but MAY render the action overflow popup at a modified position on the screen when it is displayed by selecting the Menu ফাংশন

If device implementations do not provide the Menu function, for backwards compatibility, they:

  • [C-3-1] MUST make the Menu function available to applications when targetSdkVersion is less than 10, either by a physical button, a software key, or gestures. This Menu function should be accessible unless hidden together with other navigation functions.

If device implementations provide the Assist function , they:

  • [C-4-1] MUST make the Assist function accessible with a single action (eg tap, double-click or gesture) when other navigation keys are accessible.
  • [SR] STRONGLY RECOMMENDED to use long press on HOME function as this designated interaction.

If device implementations use a distinct portion of the screen to display the navigation keys, they:

  • [C-5-1] Navigation keys MUST use a distinct portion of the screen, not available to applications, and MUST NOT obscure or otherwise interfere with the portion of the screen available to applications.
  • [C-5-2] MUST make available a portion of the display to applications that meets the requirements defined in section 7.1.1 .
  • [C-5-3] MUST honor the flags set by the app through the View.setSystemUiVisibility() API method, so that this distinct portion of the screen (aka the navigation bar) is properly hidden away as documented in the SDK.

যদি নেভিগেশন ফাংশন একটি অন-স্ক্রীন, অঙ্গভঙ্গি-ভিত্তিক ক্রিয়া হিসাবে প্রদান করা হয়:

If a navigation function is provided from anywhere on the left and right edges of the current orientation of the screen:

  • [C-7-1] The navigation function MUST be Back and provided as a swipe from both left and right edges of the current orientation of the screen.
  • [C-7-2] If custom swipeable system panels are provided on the left or right edges, they MUST be placed within the top 1/3rd of the screen with a clear, persistent visual indication that dragging in would invoke the aforementioned panels, and hence not Back. A system panel MAY be configured by a user such that it lands below the top 1/3rd of the screen edge(s) but the system panel MUST NOT use longer than 1/3rd of the edge(s).
  • [C-7-3] When the foreground app has either the View.SYSTEM_UI_FLAG_IMMERSIVE or View.SYSTEM_UI_FLAG_IMMERSIVE_STICKY flags set, swiping from the edges MUST behave as implemented in AOSP, which is documented in the SDK .
  • [C-7-4] When the foreground app has either the View.SYSTEM_UI_FLAG_IMMERSIVE or View.SYSTEM_UI_FLAG_IMMERSIVE_STICKY flags set, custom swipeable system panels MUST be hidden until the user brings in the system bars (aka navigation and status bar) as implemented in AOSP .

7.2.4। টাচস্ক্রিন ইনপুট

Android includes support for a variety of pointer input systems, such as touchscreens, touch pads, and fake touch input devices. Touchscreen-based device implementations are associated with a display such that the user has the impression of directly manipulating items on screen. Since the user is directly touching the screen, the system does not require any additional affordances to indicate the objects being manipulated.

ডিভাইস বাস্তবায়ন:

  • SHOULD have a pointer input system of some kind (either mouse-like or touch).
  • SHOULD support fully independently tracked pointers.

If device implementations include a touchscreen (single-touch or better) on a primary Android-compatible display, they:

  • [C-1-1] MUST report TOUCHSCREEN_FINGER for the Configuration.touchscreen API field.
  • [C-1-2] MUST report the android.hardware.touchscreen and android.hardware.faketouch feature flags.

If device implementations include a touchscreen that can track more than a single touch on a primary Android-compatible display, they:

  • [C-2-1] MUST report the appropriate feature flags android.hardware.touchscreen.multitouch , android.hardware.touchscreen.multitouch.distinct , android.hardware.touchscreen.multitouch.jazzhand corresponding to the type of the specific touchscreen on the যন্ত্র.

If device implementations rely on an external input device such as mouse or trackball (ie not directly touching the screen) for input on a primary Android-compatible display and meet the fake touch requirements in section 7.2.5 , they:

  • [C-3-1] MUST NOT report any feature flag starting with android.hardware.touchscreen .
  • [C-3-2] MUST report only android.hardware.faketouch .
  • [C-3-3] MUST report TOUCHSCREEN_NOTOUCH for the Configuration.touchscreen API field.

7.2.5। জাল স্পর্শ ইনপুট

Fake touch interface provides a user input system that approximates a subset of touchscreen capabilities. For example, a mouse or remote control that drives an on-screen cursor approximates touch, but requires the user to first point or focus then click. Numerous input devices like the mouse, trackpad, gyro-based air mouse, gyro-pointer, joystick, and multi-touch trackpad can support fake touch interactions. Android includes the feature constant android.hardware.faketouch, which corresponds to a high-fidelity non-touch (pointer-based) input device such as a mouse or trackpad that can adequately emulate touch-based input (including basic gesture support), and indicates that the device supports an emulated subset of touchscreen functionality.

If device implementations do not include a touchscreen but include another pointer input system which they want to make available, they:

  • SHOULD declare support for the android.hardware.faketouch feature flag.

If device implementations declare support for android.hardware.faketouch , they:

  • [C-1-1] MUST report the absolute X and Y screen positions of the pointer location and display a visual pointer on the screen.
  • [C-1-2] MUST report touch event with the action code that specifies the state change that occurs on the pointer going down or up on the screen .
  • [C-1-3] MUST support pointer down and up on an object on the screen, which allows users to emulate tap on an object on the screen.
  • [C-1-4] MUST support pointer down, pointer up, pointer down then pointer up in the same place on an object on the screen within a time threshold, which allows users to emulate double tap on an object on the screen.
  • [C-1-5] MUST support pointer down on an arbitrary point on the screen, pointer move to any other arbitrary point on the screen, followed by a pointer up, which allows users to emulate a touch drag.
  • [C-1-6] MUST support pointer down then allow users to quickly move the object to a different position on the screen and then pointer up on the screen, which allows users to fling an object on the screen.

If device implementations declare support for android.hardware.faketouch.multitouch.distinct , they:

  • [C-2-1] MUST declare support for android.hardware.faketouch .
  • [C-2-2] MUST support distinct tracking of two or more independent pointer inputs.

If device implementations declare support for android.hardware.faketouch.multitouch.jazzhand , they:

  • [C-3-1] MUST declare support for android.hardware.faketouch .
  • [C-3-2] MUST support distinct tracking of 5 (tracking a hand of fingers) or more pointer inputs fully independently.

7.2.6। গেম কন্ট্রোলার সাপোর্ট

7.2.6.1। বোতাম ম্যাপিং

ডিভাইস বাস্তবায়ন:

  • [C-1-1] MUST be capable to map HID events to the corresponding InputEvent constants as listed in the below tables. The upstream Android implementation satisfies this requirement.

If device implementations embed a controller or ship with a separate controller in the box that would provide means to input all the events listed in the below tables, they:

  • [C-2-1] MUST declare the feature flag android.hardware.gamepad
বোতাম HID Usage 2 অ্যান্ড্রয়েড বোতাম
0x09 0x0001 KEYCODE_BUTTON_A (96)
0x09 0x0002 KEYCODE_BUTTON_B (97)
X 1 0x09 0x0004 KEYCODE_BUTTON_X (99)
Y 1 0x09 0x0005 KEYCODE_BUTTON_Y (100)
D-pad up 1
D-pad down 1
0x01 0x0039 3 AXIS_HAT_Y 4
D-pad left 1
D-pad right 1
0x01 0x0039 3 AXIS_HAT_X 4
Left shoulder button 1 0x09 0x0007 KEYCODE_BUTTON_L1 (102)
Right shoulder button 1 0x09 0x0008 KEYCODE_BUTTON_R1 (103)
Left stick click 1 0x09 0x000E KEYCODE_BUTTON_THUMBL (106)
Right stick click 1 0x09 0x000F KEYCODE_BUTTON_THUMBR (107)
বাসা নম্বর -1 0x0c 0x0223 KEYCODE_HOME (3)
পিছনে 1 0x0c 0x0224 KEYCODE_BACK (4)

1 KeyEvent

2 The above HID usages must be declared within a Game pad CA (0x01 0x0005).

3 This usage must have a Logical Minimum of 0, a Logical Maximum of 7, a Physical Minimum of 0, a Physical Maximum of 315, Units in Degrees, and a Report Size of 4. The logical value is defined to be the clockwise rotation away from the vertical axis; for example, a logical value of 0 represents no rotation and the up button being pressed, while a logical value of 1 represents a rotation of 45 degrees and both the up and left keys being pressed.

4 MotionEvent

Analog Controls 1 HID Usage অ্যান্ড্রয়েড বোতাম
Left Trigger 0x02 0x00C5 AXIS_LTRIGGER
Right Trigger 0x02 0x00C4 AXIS_RTRIGGER
Left Joystick 0x01 0x0030
0x01 0x0031
AXIS_X
AXIS_Y
Right Joystick 0x01 0x0032
0x01 0x0035
AXIS_Z
AXIS_RZ

1 MotionEvent

7.2.7। দূরবর্তী নিয়ন্ত্রণ

See Section 2.3.1 for device-specific requirements.

7.3। সেন্সর

If device implementations include a particular sensor type that has a corresponding API for third-party developers, the device implementation MUST implement that API as described in the Android SDK documentation and the Android Open Source documentation on sensors .

ডিভাইস বাস্তবায়ন:

  • [C-0-1] MUST accurately report the presence or absence of sensors per the android.content.pm.PackageManager class.
  • [C-0-2] MUST return an accurate list of supported sensors via the SensorManager.getSensorList() and similar methods.
  • [C-0-3] MUST behave reasonably for all other sensor APIs (for example, by returning true or false as appropriate when applications attempt to register listeners, not calling sensor listeners when the corresponding sensors are not present; etc.).

If device implementations include a particular sensor type that has a corresponding API for third-party developers, they:

  • [C-1-1] MUST report all sensor measurements using the relevant International System of Units (metric) values for each sensor type as defined in the Android SDK documentation.
  • [C-1-2] MUST report sensor data with a maximum latency of 100 milliseconds + 2 * sample_time for the case of a sensor stream with a maximum requested latency of 0 ms when the application processor is active. This delay does not include any filtering delays.
  • [C-1-3] MUST report the first sensor sample within 400 milliseconds + 2 * sample_time of the sensor being activated. It is acceptable for this sample to have an accuracy of 0.
  • [C-1-4] For any API indicated by the Android SDK documentation to be a continuous sensor , device implementations MUST continuously provide periodic data samples that SHOULD have a jitter below 3%, where jitter is defined as the standard deviation of the difference of the reported timestamp values between consecutive events.
  • [C-1-5] MUST ensure that the sensor event stream MUST NOT prevent the device CPU from entering a suspend state or waking up from a suspend state.
  • [C-1-6] MUST report the event time in nanoseconds as defined in the Android SDK documentation, representing the time the event happened and synchronized with the SystemClock.elapsedRealtimeNano() clock.
  • [C-SR] Are STRONGLY RECOMMENDED to have timestamp synchronization error below 100 milliseconds, and SHOULD have timestamp synchronization error below 1 millisecond.
  • When several sensors are activated, the power consumption SHOULD NOT exceed the sum of the individual sensor's reported power consumption.

The list above is not comprehensive; the documented behavior of the Android SDK and the Android Open Source Documentations on sensors is to be considered authoritative.

If device implementations include a particular sensor type that has a corresponding API for third-party developers, they:

  • [C-1-6] MUST set a non-zero resolution for all sensors, and report the value via the Sensor.getResolution() API method.

Some sensor types are composite, meaning they can be derived from data provided by one or more other sensors. (Examples include the orientation sensor and the linear acceleration sensor.)

ডিভাইস বাস্তবায়ন:

  • SHOULD implement these sensor types, when they include the prerequisite physical sensors as described in sensor types .

If device implementations include a composite sensor, they:

  • [C-2-1] MUST implement the sensor as described in the Android Open Source documentation on composite sensors .

If device implementations include a particular sensor type that has a corresponding API for third-party developers and the sensor only reports one value, then device implementations:

  • [C-3-1] MUST set the resolution to 1 for the sensor and report the value via the Sensor.getResolution() API method.

If device implementations include a particular sensor type which supports SensorAdditionalInfo#TYPE_VEC3_CALIBRATION and the sensor is exposed to third-party developers, they:

  • [C-4-1] MUST NOT include any fixed, factory-determined calibration parameters in the data provided.

If device implementations include a combination of 3-axis accelerometer, a 3-axis gyroscope sensor, or a magnetometer sensor, they are:

  • [C-SR] STRONGLY RECOMMENDED to ensure the accelerometer, gyroscope and magnetometer have a fixed relative position, such that if the device is transformable (eg foldable), the sensor axes remain aligned and consistent with the sensor coordinate system throughout all possible device transformation রাজ্যগুলি

7.3.1। অ্যাক্সিলোমিটার

ডিভাইস বাস্তবায়ন:

  • [C-SR] Are STRONGLY RECOMMENDED to include a 3-axis accelerometer.

If device implementations include a 3-axis accelerometer, they:

  • [C-1-1] MUST be able to report events up to a frequency of at least 50 Hz.
  • [C-1-2] MUST implement and report TYPE_ACCELEROMETER sensor.
  • [C-1-3] MUST comply with the Android sensor coordinate system as detailed in the Android APIs.
  • [C-1-4] MUST be capable of measuring from freefall up to four times the gravity(4g) or more on any axis.
  • [C-1-5] MUST have a resolution of at least 12-bits.
  • [C-1-6] MUST have a standard deviation no greater than 0.05 m/s^, where the standard deviation should be calculated on a per axis basis on samples collected over a period of at least 3 seconds at the fastest sampling rate.
  • [SR] are STRONGLY RECOMMENDED to implement the TYPE_SIGNIFICANT_MOTION composite sensor.
  • [SR] are STRONGLY RECOMMENDED to implement and report TYPE_ACCELEROMETER_UNCALIBRATED sensor. Android devices are STRONGLY RECOMMENDED to meet this requirement so they will be able to upgrade to the future platform release where this might become REQUIRED.
  • SHOULD implement the TYPE_SIGNIFICANT_MOTION , TYPE_TILT_DETECTOR , TYPE_STEP_DETECTOR , TYPE_STEP_COUNTER composite sensors as described in the Android SDK document.
  • SHOULD report events up to at least 200 Hz.
  • SHOULD have a resolution of at least 16-bits.
  • SHOULD be calibrated while in use if the characteristics changes over the life cycle and compensated, and preserve the compensation parameters between device reboots.
  • SHOULD be temperature compensated.

If device implementations include a 3-axis accelerometer and any of the TYPE_SIGNIFICANT_MOTION , TYPE_TILT_DETECTOR , TYPE_STEP_DETECTOR , TYPE_STEP_COUNTER composite sensors are implemented:

  • [C-2-1] The sum of their power consumption MUST always be less than 4 mW.
  • SHOULD each be below 2 mW and 0.5 mW for when the device is in a dynamic or static condition.

If device implementations include a 3-axis accelerometer and a 3-axis gyroscope sensor, they:

  • [C-3-1] MUST implement the TYPE_GRAVITY and TYPE_LINEAR_ACCELERATION composite sensors.
  • [C-SR] Are STRONGLY RECOMMENDED to implement the TYPE_GAME_ROTATION_VECTOR composite sensor.

If device implementations include a 3-axis accelerometer, a 3-axis gyroscope sensor, and a magnetometer sensor, they:

  • [C-4-1] MUST implement a TYPE_ROTATION_VECTOR composite sensor.

7.3.2। ম্যাগনেটোমিটার

ডিভাইস বাস্তবায়ন:

  • [C-SR] Are STRONGLY RECOMMENDED to include a 3-axis magnetometer (compass).

If device implementations include a 3-axis magnetometer, they:

  • [C-1-1] MUST implement the TYPE_MAGNETIC_FIELD sensor.
  • [C-1-2] MUST be able to report events up to a frequency of at least 10 Hz and SHOULD report events up to at least 50 Hz.
  • [C-1-3] MUST comply with the Android sensor coordinate system as detailed in the Android APIs.
  • [C-1-4] MUST be capable of measuring between -900 µT and +900 µT on each axis before saturating.
  • [C-1-5] MUST have a hard iron offset value less than 700 µT and SHOULD have a value below 200 µT, by placing the magnetometer far from dynamic (current-induced) and static (magnet-induced) magnetic fields.
  • [C-1-6] MUST have a resolution equal or denser than 0.6 µT.
  • [C-1-7] MUST support online calibration and compensation of the hard iron bias, and preserve the compensation parameters between device reboots.
  • [C-1-8] MUST have the soft iron compensation applied—the calibration can be done either while in use or during the production of the device.
  • [C-1-9] MUST have a standard deviation, calculated on a per axis basis on samples collected over a period of at least 3 seconds at the fastest sampling rate, no greater than 1.5 µT; SHOULD have a standard deviation no greater than 0.5 µT.
  • [C-SR] Are STRONGLY RECOMMENDED to implement TYPE_MAGNETIC_FIELD_UNCALIBRATED sensor.

If device implementations include a 3-axis magnetometer, an accelerometer sensor, and a 3-axis gyroscope sensor, they:

  • [C-2-1] MUST implement a TYPE_ROTATION_VECTOR composite sensor.

If device implementations include a 3-axis magnetometer, an accelerometer, they:

  • MAY implement the TYPE_GEOMAGNETIC_ROTATION_VECTOR sensor.

If device implementations include a 3-axis magnetometer, an accelerometer and TYPE_GEOMAGNETIC_ROTATION_VECTOR sensor, they:

  • [C-3-1] MUST consume less than 10 mW.
  • SHOULD consume less than 3 mW when the sensor is registered for batch mode at 10 Hz.

7.3.3। জিপিএস

ডিভাইস বাস্তবায়ন:

  • [C-SR] Are STRONGLY RECOMMENDED to include a GPS/GNSS receiver.

If device implementations include a GPS/GNSS receiver and report the capability to applications through the android.hardware.location.gps feature flag, they:

  • [C-1-1] MUST support location outputs at a rate of at least 1 Hz when requested via LocationManager#requestLocationUpdate .
  • [C-1-2] MUST be able to determine the location in open-sky conditions (strong signals, negligible multipath, HDOP < 2) within 10 seconds (fast time to first fix), when connected to a 0.5 Mbps or faster data speed internet connection. This requirement is typically met by the use of some form of Assisted or Predicted GPS/GNSS technique to minimize GPS/GNSS lock-on time (Assistance data includes Reference Time, Reference Location and Satellite Ephemeris/Clock).
    • [C-1-6] After making such a location calculation, device implementations MUST determine its location, in open sky, within 5 seconds, when location requests are restarted, up to an hour after the initial location calculation, even when the subsequent request is made without a data connection, and/or after a power cycle.
  • In open sky conditions after determining the location, while stationary or moving with less than 1 meter per second squared of acceleration:

    • [C-1-3] MUST be able to determine location within 20 meters, and speed within 0.5 meters per second, at least 95% of the time.
    • [C-1-4] MUST simultaneously track and report via GnssStatus.Callback at least 8 satellites from one constellation.
    • একাধিক নক্ষত্রমণ্ডল থেকে (যেমন GPS + অন্তত একটি গ্লোনাস, বেইডো, গ্যালিলিও) থেকে একযোগে কমপক্ষে 24টি উপগ্রহ ট্র্যাক করতে সক্ষম হওয়া উচিত।
    • [C-SR] Are STRONGLY RECOMMENDED to continue to deliver normal GPS/GNSS location outputs through GNSS Location Provider API's during an emergency phone call.
    • [C-SR] Are STRONGLY RECOMMENDED to report GNSS measurements from all constellations tracked (as reported in GnssStatus messages), with the exception of SBAS.
    • [C-SR] Are STRONGLY RECOMMENDED to report AGC, and Frequency of GNSS measurement.
    • [C-SR] Are STRONGLY RECOMMENDED to report all accuracy estimates (including Bearing, Speed, and Vertical) as part of each GPS/GNSS location.
    • [C-SR] Are STRONGLY RECOMMENDED to report GNSS measurements, as soon as they are found, even if a location calculated from GPS/GNSS is not yet reported.
    • [C-SR] Are STRONGLY RECOMMENDED to report GNSS pseudoranges and pseudorange rates, that, in open-sky conditions after determining the location, while stationary or moving with less than 0.2 meter per second squared of acceleration, are sufficient to calculate position within 20 meters, and speed within 0.2 meters per second, at least 95% of the time.

7.3.4। জাইরোস্কোপ

ডিভাইস বাস্তবায়ন:

  • [C-SR] Are STRONGLY RECOMMENDED to include a gyroscope sensor.

If device implementations include a 3-axis gyroscope, they:

  • [C-1-1] MUST be able to report events up to a frequency of at least 50 Hz.
  • [C-1-2] MUST implement the TYPE_GYROSCOPE sensor and are STRONGLY RECOMMENDED to also implement the TYPE_GYROSCOPE_UNCALIBRATED sensor.
  • [C-1-4] MUST have a resolution of 12-bits or more and SHOULD have a resolution of 16-bits or more.
  • [C-1-5] MUST be temperature compensated.
  • [C-1-6] MUST be calibrated and compensated while in use, and preserve the compensation parameters between device reboots.
  • [C-1-7] MUST have a variance no greater than 1e-7 rad^2 / s^2 per Hz (variance per Hz, or rad^2 / s). The variance is allowed to vary with the sampling rate, but MUST be constrained by this value. In other words, if you measure the variance of the gyro at 1 Hz sampling rate it SHOULD be no greater than 1e-7 rad^2/s^2.
  • [SR] Calibration error is STRONGLY RECOMMENDED to be less than 0.01 rad/s when device is stationary at room temperature.
  • SHOULD report events up to at least 200 Hz.

If device implementations include a 3-axis gyroscope, an accelerometer sensor and a magnetometer sensor, they:

  • [C-2-1] MUST implement a TYPE_ROTATION_VECTOR composite sensor.

If device implementations include a 3-axis accelerometer and a 3-axis gyroscope sensor, they:

  • [C-3-1] MUST implement the TYPE_GRAVITY and TYPE_LINEAR_ACCELERATION composite sensors.
  • [C-SR] Are STRONGLY RECOMMENDED to implement the TYPE_GAME_ROTATION_VECTOR composite sensor.

7.3.5। ব্যারোমিটার

ডিভাইস বাস্তবায়ন:

  • [C-SR] Are STRONGLY RECOMMENDED to include a barometer (ambient air pressure sensor).

If device implementations include a barometer, they:

  • [C-1-1] MUST implement and report TYPE_PRESSURE sensor.
  • [C-1-2] MUST be able to deliver events at 5 Hz or greater.
  • [C-1-3] MUST be temperature compensated.
  • [SR] STRONGLY RECOMMENDED to be able to report pressure measurements in the range 300hPa to 1100hPa.
  • SHOULD have an absolute accuracy of 1hPa.
  • SHOULD have a relative accuracy of 0.12hPa over 20hPa range (equivalent to ~1m accuracy over ~200m change at sea level).

7.3.6। থার্মোমিটার

If device implementations include an ambient thermometer (temperature sensor), they:

  • [C-1-1] MUST define SENSOR_TYPE_AMBIENT_TEMPERATURE for the ambient temperature sensor and the sensor MUST measure the ambient (room/vehicle cabin) temperature from where the user is interacting with the device in degrees Celsius.

If device implementations include a thermometer sensor that measures a temperature other than ambient temperature, such as CPU temperature, they:

7.3.7। ফটোমিটার

  • Device implementations MAY include a photometer (ambient light sensor).

7.3.8। নৈকট্য সেন্সর

  • Device implementations MAY include a proximity sensor.

If device implementations include a proximity sensor, they:

  • [C-1-1] MUST measure the proximity of an object in the same direction as the screen. That is, the proximity sensor MUST be oriented to detect objects close to the screen, as the primary intent of this sensor type is to detect a phone in use by the user. If device implementations include a proximity sensor with any other orientation, it MUST NOT be accessible through this API.
  • [C-1-2] MUST have 1-bit of accuracy or more.

7.3.9। উচ্চ বিশ্বস্ততা সেন্সর

If device implementations include a set of higher quality sensors as defined in this section, and make available them to third-party apps, they:

  • [C-1-1] MUST identify the capability through the android.hardware.sensor.hifi_sensors feature flag.

If device implementations declare android.hardware.sensor.hifi_sensors , they:

  • [C-2-1] MUST have a TYPE_ACCELEROMETER sensor which:

    • MUST have a measurement range between at least -8g and +8g, and is STRONGLY RECOMMENDED to have a measurement range between at least -16g and +16g.
    • MUST have a measurement resolution of at least 2048 LSB/g.
    • MUST have a minimum measurement frequency of 12.5 Hz or lower.
    • MUST have a maximum measurement frequency of 400 Hz or higher; SHOULD support the SensorDirectChannel RATE_VERY_FAST .
    • MUST have a measurement noise not above 400 μg/√Hz.
    • MUST implement a non-wake-up form of this sensor with a buffering capability of at least 3000 sensor events.
    • MUST have a batching power consumption not worse than 3 mW.
    • [C-SR] Is STRONGLY RECOMMENDED to have 3dB measurement bandwidth of at least 80% of Nyquist frequency, and white noise spectrum within this bandwidth.
    • SHOULD have an acceleration random walk less than 30 μg √Hz tested at room temperature.
    • SHOULD have a bias change vs. temperature of ≤ +/- 1 mg/°C.
    • SHOULD have a best-fit line non-linearity of ≤ 0.5%, and sensitivity change vs. temperature of ≤ 0.03%/C°.
    • SHOULD have cross-axis sensitivity of < 2.5 % and variation of cross-axis sensitivity < 0.2% in device operation temperature range.
  • [C-2-2] MUST have a TYPE_ACCELEROMETER_UNCALIBRATED with the same quality requirements as TYPE_ACCELEROMETER .

  • [C-2-3] MUST have a TYPE_GYROSCOPE sensor which:

    • MUST have a measurement range between at least -1000 and +1000 dps.
    • MUST have a measurement resolution of at least 16 LSB/dps.
    • MUST have a minimum measurement frequency of 12.5 Hz or lower.
    • MUST have a maximum measurement frequency of 400 Hz or higher; SHOULD support the SensorDirectChannel RATE_VERY_FAST .
    • MUST have a measurement noise not above 0.014°/s/√Hz.
    • [C-SR] Is STRONGLY RECOMMENDED to have 3dB measurement bandwidth of at least 80% of Nyquist frequency, and white noise spectrum within this bandwidth.
    • SHOULD have a rate random walk less than 0.001 °/s √Hz tested at room temperature.
    • SHOULD have a bias change vs. temperature of ≤ +/- 0.05 °/ s / °C.
    • SHOULD have a sensitivity change vs. temperature of ≤ 0.02% / °C.
    • SHOULD have a best-fit line non-linearity of ≤ 0.2%.
    • SHOULD have a noise density of ≤ 0.007 °/s/√Hz.
    • SHOULD have calibration error less than 0.002 rad/s in temperature range 10 ~ 40 ℃ when device is stationary.
    • SHOULD have g-sensitivity less than 0.1°/s/g.
    • SHOULD have cross-axis sensitivity of < 4.0 % and cross-axis sensitivity variation < 0.3% in device operation temperature range.
  • [C-2-4] MUST have a TYPE_GYROSCOPE_UNCALIBRATED with the same quality requirements as TYPE_GYROSCOPE .

  • [C-2-5] MUST have a TYPE_GEOMAGNETIC_FIELD sensor which:

    • MUST have a measurement range between at least -900 and +900 μT.
    • MUST have a measurement resolution of at least 5 LSB/uT.
    • MUST have a minimum measurement frequency of 5 Hz or lower.
    • MUST have a maximum measurement frequency of 50 Hz or higher.
    • MUST have a measurement noise not above 0.5 uT.
  • [C-2-6] MUST have a TYPE_MAGNETIC_FIELD_UNCALIBRATED with the same quality requirements as TYPE_GEOMAGNETIC_FIELD and in addition:

    • MUST implement a non-wake-up form of this sensor with a buffering capability of at least 600 sensor events.
    • [C-SR] Is STRONGLY RECOMMENDED to have white noise spectrum from 1 Hz to at least 10 Hz when the report rate is 50 Hz or higher.
  • [C-2-7] MUST have a TYPE_PRESSURE sensor which:

    • MUST have a measurement range between at least 300 and 1100 hPa.
    • MUST have a measurement resolution of at least 80 LSB/hPa.
    • MUST have a minimum measurement frequency of 1 Hz or lower.
    • MUST have a maximum measurement frequency of 10 Hz or higher.
    • MUST have a measurement noise not above 2 Pa/√Hz.
    • MUST implement a non-wake-up form of this sensor with a buffering capability of at least 300 sensor events.
    • MUST have a batching power consumption not worse than 2 mW.
  • [C-2-8] MUST have a TYPE_GAME_ROTATION_VECTOR sensor.
  • [C-2-9] MUST have a TYPE_SIGNIFICANT_MOTION sensor which:
    • MUST have a power consumption not worse than 0.5 mW when device is static and 1.5 mW when device is moving.
  • [C-2-10] MUST have a TYPE_STEP_DETECTOR sensor which:
    • MUST implement a non-wake-up form of this sensor with a buffering capability of at least 100 sensor events.
    • MUST have a power consumption not worse than 0.5 mW when device is static and 1.5 mW when device is moving.
    • MUST have a batching power consumption not worse than 4 mW.
  • [C-2-11] MUST have a TYPE_STEP_COUNTER sensor which:
    • MUST have a power consumption not worse than 0.5 mW when device is static and 1.5 mW when device is moving.
  • [C-2-12] MUST have a TILT_DETECTOR sensor which:
    • MUST have a power consumption not worse than 0.5 mW when device is static and 1.5 mW when device is moving.
  • [C-2-13] The event timestamp of the same physical event reported by the Accelerometer, Gyroscope, and Magnetometer MUST be within 2.5 milliseconds of each other. The event timestamp of the same physical event reported by the Accelerometer and Gyroscope SHOULD be within 0.25 milliseconds of each other.
  • [C-2-14] MUST have Gyroscope sensor event timestamps on the same time base as the camera subsystem and within 1 milliseconds of error.
  • [C-2-15] MUST deliver samples to applications within 5 milliseconds from the time when the data is available on any of the above physical sensors to the application.
  • [C-2-16] MUST NOT have a power consumption higher than 0.5 mW when device is static and 2.0 mW when device is moving when any combination of the following sensors are enabled:
    • SENSOR_TYPE_SIGNIFICANT_MOTION
    • SENSOR_TYPE_STEP_DETECTOR
    • SENSOR_TYPE_STEP_COUNTER
    • SENSOR_TILT_DETECTORS
  • [C-2-17] MAY have a TYPE_PROXIMITY sensor, but if present MUST have a minimum buffer capability of 100 sensor events.

Note that all power consumption requirements in this section do not include the power consumption of the Application Processor. It is inclusive of the power drawn by the entire sensor chain—the sensor, any supporting circuitry, any dedicated sensor processing system, etc.

If device implementations include direct sensor support, they:

  • [C-3-1] MUST correctly declare support of direct channel types and direct report rates level through the isDirectChannelTypeSupported and getHighestDirectReportRateLevel API.
  • [C-3-2] MUST support at least one of the two sensor direct channel types for all sensors that declare support for sensor direct channel.
  • SHOULD support event reporting through sensor direct channel for primary sensor (non-wakeup variant) of the following types:
    • TYPE_ACCELEROMETER
    • TYPE_ACCELEROMETER_UNCALIBRATED
    • TYPE_GYROSCOPE
    • TYPE_GYROSCOPE_UNCALIBRATED
    • TYPE_MAGNETIC_FIELD
    • TYPE_MAGNETIC_FIELD_UNCALIBRATED

7.3.10। বায়োমেট্রিক সেন্সর

For additional background on Measuring Biometric Unlock Security, please see Measuring Biometric Security documentation .

If device implementations include a secure lock screen, they:

  • SHOULD include a biometric sensor

Biometric sensors can be classified as Class 3 (formerly Strong ), Class 2 (formerly Weak ), or Class 1 (formerly Convenience ) based on their spoof and imposter acceptance rates, and on the security of the biometric pipeline. This classification determines the capabilities the biometric sensor has to interface with the platform and with third-party applications. Sensors are classified as Class 1 by default, and need to meet additional requirements as detailed below if they wish to be classified as either Class 2 or Class 3 . Both Class 2 and Class 3 biometrics get additional capabilities as detailed below.

If device implementations make a biometric sensor available to third-party applications via android.hardware.biometrics.BiometricManager , android.hardware.biometrics.BiometricPrompt , and android.provider.Settings.ACTION_BIOMETRIC_ENROLL , they:

  • [C-4-1] MUST meet the requirements for Class 3 or Class 2 biometric as defined in this document.
  • [C-4-2] MUST recognize and honor each parameter name defined as a constant in the Authenticators class and any combinations thereof. Conversely, MUST NOT honor or recognize integer constants passed to the canAuthenticate(int) and setAllowedAuthenticators(int) methods other than those documented as public constants in Authenticators and any combinations thereof.
  • [C-4-3] MUST implement the ACTION_BIOMETRIC_ENROLL action on devices that have either Class 3 or Class 2 biometrics. This action MUST only present the enrollment entry points for Class 3 or Class 2 biometrics.

If device implementations support passive biometrics, they:

  • [C-5-1] MUST by default require an additional confirmation step (eg a button press).
  • [C-SR] Are STRONGLY RECOMMENDED to have a setting to allow users to override application preference and always require accompanying confirmation step.
  • [C-SR] Are STRONGLY RECOMMENDED to have the confirm action be secured such that an operating system or kernel compromise cannot spoof it. For example, this means that the confirm action based on a physical button is routed through an input-only general-purpose input/output (GPIO) pin of a secure element (SE) that cannot be driven by any other means than a physical button প্রেস
  • [C-5-2] MUST additionally implement an implicit authentication flow (without confirmation step) corresponding to setConfirmationRequired(boolean) , which applications can set to utilize for sign-in flows.

If device implementations have multiple biometric sensors, they:

  • [C-SR] Are STRONGLY RECOMMENDED to require only one biometric be confirmed per authentication (eg if both fingerprint and face sensors are available on the device, onAuthenticationSucceeded should be sent after any one of them is confirmed).

In order for device implementations to allow access to keystore keys to third-party applications, they:

  • [C-6-1] MUST meet the requirements for Class 3 as defined in this section below.
  • [C-6-2] MUST present only Class 3 biometrics when the authentication requires BIOMETRIC_STRONG , or the authentication is invoked with a CryptoObject .

If device implementations wish to treat a biometric sensor as Class 1 (formerly Convenience ), they:

  • [C-1-1] MUST have a false acceptance rate less than 0.002%.
  • [C-1-2] MUST disclose that this mode may be less secure than a strong PIN, pattern, or password and clearly enumerate the risks of enabling it, if the spoof and imposter acceptance rates are higher than 7% as measured by the Android Biometrics Test Protocols .
  • [C-1-3] MUST rate limit attempts for at least 30 seconds after five false trials for biometric verification - where a false trial is one with an adequate capture quality ( BIOMETRIC_ACQUIRED_GOOD ) that does not match an enrolled biometric.
  • [C-1-4] MUST prevent adding new biometrics without first establishing a chain of trust by having the user confirm existing or add a new device credential (PIN/pattern/password) that's secured by TEE; the Android Open Source Project implementation provides the mechanism in the framework to do so.
  • [C-1-5] MUST completely remove all identifiable biometric data for a user when the user's account is removed (including via a factory reset).
  • [C-1-6] MUST honor the individual flag for that biometric (ie DevicePolicyManager.KEYGUARD_DISABLE_FINGERPRINT , DevicePolicymanager.KEYGUARD_DISABLE_FACE , or DevicePolicymanager.KEYGUARD_DISABLE_IRIS ).
  • [C-1-7] MUST challenge the user for the recommended primary authentication (eg PIN, pattern, password) once every 24 hours or less for new devices launching with Android version 10, once every 72 hours or less for devices upgrading from earlier Android version.
  • [C-1-8] MUST challenge the user for the recommended primary authentication (eg: PIN, pattern, password) after one of the following:

    • a 4-hour idle timeout period, OR
    • 3 failed biometric authentication attempts.
    • The idle timeout period and the failed authentication count is reset after any successful confirmation of the device credentials.

    Upgrading devices from an earlier Android version can be exempted from C-1-8. * [C-SR] Are STRONGLY RECOMMENDED to use the logic in the framework provided by the Android Open Source Project to enforce constraints specified in [C-1-7] and [C-1-8] for new devices. * [C-SR] Are STRONGLY RECOMMENDED to have a false rejection rate of less than 10%, as measured on the device. * [C-SR] Are STRONGLY RECOMMENDED to have a latency below 1 second, measured from when the biometric is detected, until the screen is unlocked, for each enrolled biometric.

If device implementations wish to treat a biometric sensor as Class 2 (formerly Weak ), they:

  • [C-2-1] MUST meet all requirements for Class 1 above.
  • [C-2-2] MUST have a spoof and imposter acceptance rate not higher than 20% as measured by the Android Biometrics Test Protocols .
  • [C-2-3] MUST perform the biometric matching in an isolated execution environment outside Android user or kernel space, such as the Trusted Execution Environment (TEE), or on a chip with a secure channel to the isolated execution environment.
  • [C-2-4] MUST have all identifiable data encrypted and cryptographically authenticated such that they cannot be acquired, read or altered outside of the isolated execution environment or a chip with a secure channel to the isolated execution environment as documented in the implementation guidelines on the Android Open Source Project site.
  • [C-2-5] For camera based biometrics, while biometric based authentication or enrollment is happening:
    • MUST operate the camera in a mode that prevents camera frames from being read or altered outside the isolated execution environment or a chip with a secure channel to the isolated execution environment.
    • For RGB single-camera solutions, the camera frames CAN be readable outside the isolated execution environment to support operations such as preview for enrollment, but MUST still NOT be alterable.
  • [C-2-6] MUST NOT enable third-party applications to distinguish between individual biometric enrollments.
  • [C-2-7] MUST NOT allow unencrypted access to identifiable biometric data or any data derived from it (such as embeddings) to the Application Processor outside the context of the TEE.
  • [C-2-8] MUST have a secure processing pipeline such that an operating system or kernel compromise cannot allow data to be directly injected to falsely authenticate as the user.

    If device implementations are already launched on an earlier Android version and cannot meet the requirement C-2-8 through a system software update, they MAY be exempted from the requirement.

  • [C-SR] Are STRONGLY RECOMMENDED to include liveness detection for all biometric modalities and attention detection for Face biometrics.

If device implementations wish to treat a biometric sensor as Class 3 (formerly Strong ), they:

  • [C-3-1] MUST meet all the requirements of Class 2 above, except for [C-1-7] and [C-1-8]. Upgrading devices from an earlier Android version are not exempted from C-2-7.
  • [C-3-2] MUST have a hardware-backed keystore implementation.
  • [C-3-3] MUST have a spoof and imposter acceptance rate not higher than 7% as measured by the Android Biometrics Test Protocols .
  • [C-3-4] MUST challenge the user for the recommended primary authentication (eg PIN, pattern, password) once every 72 hours or less.

7.3.12। পোজ সেন্সর

ডিভাইস বাস্তবায়ন:

  • MAY support pose sensor with 6 degrees of freedom.

If device implementations support pose sensor with 6 degrees of freedom, they:

  • [C-1-1] MUST implement and report TYPE_POSE_6DOF sensor.
  • [C-1-2] MUST be more accurate than the rotation vector alone.

7.3.13। Hinge Angle Sensor

If device implementations support a hinge angle sensor, they:

7.4। ডেটা সংযোগ

7.4.1। টেলিফোনি

“Telephony” as used by the Android APIs and this document refers specifically to hardware related to placing voice calls and sending SMS messages via a GSM or CDMA network. While these voice calls may or may not be packet-switched, they are for the purposes of Android considered independent of any data connectivity that may be implemented using the same network. In other words, the Android “telephony” functionality and APIs refer specifically to voice calls and SMS. For instance, device implementations that cannot place calls or send/receive SMS messages are not considered a telephony device, regardless of whether they use a cellular network for data connectivity.

  • Android MAY be used on devices that do not include telephony hardware. That is, Android is compatible with devices that are not phones.

If device implementations include GSM or CDMA telephony, they:

  • [C-1-1] MUST declare the android.hardware.telephony feature flag and other sub-feature flags according to the technology.
  • [C-1-2] MUST implement full support for the API for that technology.

If device implementations do not include telephony hardware, they:

  • [C-2-1] MUST implement the full APIs as no-ops.

If device implementations support eUICCs or eSIMs/embedded SIMs and include a proprietary mechanism to make eSIM functionality available for third-party developers, they:

7.4.1.1। নম্বর ব্লকিং সামঞ্জস্য

If device implementations report the android.hardware.telephony feature , they:

  • [C-1-1] MUST include number blocking support
  • [C-1-2] MUST fully implement BlockedNumberContract and the corresponding API as described in the SDK documentation.
  • [C-1-3] MUST block all calls and messages from a phone number in 'BlockedNumberProvider' without any interaction with apps. The only exception is when number blocking is temporarily lifted as described in the SDK documentation.
  • [C-1-4] MUST NOT write to the platform call log provider for a blocked call.
  • [C-1-5] MUST NOT write to the Telephony provider for a blocked message.
  • [C-1-6] MUST implement a blocked numbers management UI, which is opened with the intent returned by TelecomManager.createManageBlockedNumbersIntent() method.
  • [C-1-7] MUST NOT allow secondary users to view or edit the blocked numbers on the device as the Android platform assumes the primary user to have full control of the telephony services, a single instance, on the device. All blocking related UI MUST be hidden for secondary users and the blocked list MUST still be respected.
  • SHOULD migrate the blocked numbers into the provider when a device updates to Android 7.0.
7.4.1.2। Telecom API

ডিভাইস বাস্তবায়ন android.hardware.telephony রিপোর্ট করলে, তারা:

  • [C-1-1] MUST support the ConnectionService APIs described in the SDK .
  • [C-1-2] MUST display a new incoming call and provide user affordance to accept or reject the incoming call when the user is on an ongoing call that is made by a third-party app that does not support the hold feature specified via CAPABILITY_SUPPORT_HOLD .
  • [C-1-3] MUST have an application that implements InCallService .
  • [C-SR] Are STRONGLY RECOMMENDED to notify the user that answering an incoming call will drop an ongoing call.

    The AOSP implementation meets these requirements by a heads-up notification which indicates to the user that answering an incoming call will cause the other call to be dropped.

  • [C-SR] Are STRONGLY RECOMMENDED to preload the default dialer app that shows a call log entry and the name of a third-party app in its call log when the third-party app sets the EXTRA_LOG_SELF_MANAGED_CALLS extras key on its PhoneAccount to true .

  • [C-SR] Are STRONGLY RECOMMENDED to handle the audio headset's KEYCODE_MEDIA_PLAY_PAUSE and KEYCODE_HEADSETHOOK events for the android.telecom APIs as below:

7.4.2। IEEE 802.11 (ওয়াই-ফাই)

ডিভাইস বাস্তবায়ন:

  • SHOULD include support for one or more forms of 802.11.

If device implementations include support for 802.11 and expose the functionality to a third-party application, they:

  • [C-1-1] MUST implement the corresponding Android API.
  • [C-1-2] MUST report the hardware feature flag android.hardware.wifi .
  • [C-1-3] MUST implement the multicast API as described in the SDK documentation.
  • [C-1-4] MUST support multicast DNS (mDNS) and MUST NOT filter mDNS packets (224.0.0.251) at any time of operation including:
    • Even when the screen is not in an active state.
    • For Android Television device implementations, even when in standby power states.
  • [C-1-5] MUST NOT treat the WifiManager.enableNetwork() API method call as a sufficient indication to switch the currently active Network that is used by default for application traffic and is returned by ConnectivityManager API methods such as getActiveNetwork and registerDefaultNetworkCallback . In other words, they MAY only disable the Internet access provided by any other network provider (eg mobile data) if they successfully validate that the Wi-Fi network is providing Internet access.
  • [C-1-6] Are STRONGLY RECOMMENDED to, when the ConnectivityManager.reportNetworkConnectivity() API method is called, re-evaluate the Internet access on the Network and, once the evaluation determines that the current Network no longer provides Internet access, switch to any other available network (eg mobile data) that provides Internet access.
  • [C-SR] Are STRONGLY RECOMMENDED to randomize the source MAC address and sequence number of probe request frames, once at the beginning of each scan, while STA is disconnected.
    • Each group of probe request frames comprising one scan should use one consistent MAC address (SHOULD NOT randomize MAC address halfway through a scan).
    • Probe request sequence number should iterate as normal (sequentially) between the probe requests in a scan.
    • Probe request sequence number should randomize between the last probe request of a scan and the first probe request of the next scan.
  • [C-SR] Are STRONGLY RECOMMENDED, while STA is disconnected, to allow only the following elements in probe request frames:
    • SSID Parameter Set (0)
    • DS Parameter Set (3)

If device implementations include support for Wi-Fi power save mode as defined in IEEE 802.11 standard, they:

  • [C-3-1] MUST turn off Wi-Fi power save mode whenever an app acquires WIFI_MODE_FULL_HIGH_PERF lock or WIFI_MODE_FULL_LOW_LATENCY lock via WifiManager.createWifiLock() and WifiManager.WifiLock.acquire() APIs and the lock is active.
  • [C-3-2] The average round trip latency between the device and an access point while the device is in a Wi-Fi Low Latency Lock ( WIFI_MODE_FULL_LOW_LATENCY ) mode MUST be smaller than the latency during a Wi-Fi High Perf Lock ( WIFI_MODE_FULL_HIGH_PERF ) mode.
  • [C-SR] Are STRONGLY RECOMMENDED to minimize Wi-Fi round trip latency whenever a Low Latency Lock ( WIFI_MODE_FULL_LOW_LATENCY ) is acquired and takes effect.

If device implementations support Wi-Fi and use Wi-Fi for location scanning, they:

7.4.2.1। ওয়াই - ফাই ডিরেক্ট

ডিভাইস বাস্তবায়ন:

  • SHOULD include support for Wi-Fi Direct (Wi-Fi peer-to-peer).

If device implementations include support for Wi-Fi Direct, they:

  • [C-1-1] MUST implement the corresponding Android API as described in the SDK documentation.
  • [C-1-2] MUST report the hardware feature android.hardware.wifi.direct .
  • [C-1-3] MUST support regular Wi-Fi operation.
  • [C-1-4] MUST support Wi-Fi and Wi-Fi Direct operations concurrently.

ডিভাইস বাস্তবায়ন:

If device implementations include support for TDLS and TDLS is enabled by the WiFiManager API, they:

  • [C-1-1] MUST declare support for TDLS through WifiManager.isTdlsSupported .
  • SHOULD use TDLS only when it is possible AND beneficial.
  • SHOULD have some heuristic and NOT use TDLS when its performance might be worse than going through the Wi-Fi access point.
7.4.2.3। Wi-Fi Aware

ডিভাইস বাস্তবায়ন:

If device implementations include support for Wi-Fi Aware and expose the functionality to third-party apps, then they:

  • [C-1-1] MUST implement the WifiAwareManager APIs as described in the SDK documentation .
  • [C-1-2] MUST declare the android.hardware.wifi.aware feature flag.
  • [C-1-3] MUST support Wi-Fi and Wi-Fi Aware operations concurrently.
  • [C-1-4] MUST randomize the Wi-Fi Aware management interface address at intervals no longer than 30 minutes and whenever Wi-Fi Aware is enabled unless an Aware ranging operation is ongoing or an Aware data-path is active (randomization is not expected for as long as the data-path is active).

If device implementations include support for Wi-Fi Aware and Wi-Fi Location as described in Section 7.4.2.5 and exposes these functionalities to third-party apps, then they:

7.4.2.4। Wi-Fi Passpoint

ডিভাইস বাস্তবায়ন:

If device implementations include support for Wi-Fi Passpoint, they:

  • [C-1-1] MUST implement the Passpoint related WifiManager APIs as described in the SDK documentation .
  • [C-1-2] MUST support IEEE 802.11u standard, specifically related to Network Discovery and Selection, such as Generic Advertisement Service (GAS) and Access Network Query Protocol (ANQP).

Conversely if device implementations do not include support for Wi-Fi Passpoint:

  • [C-2-1] The implementation of the Passpoint related WifiManager APIs MUST throw an UnsupportedOperationException .
7.4.2.5। Wi-Fi Location (Wi-Fi Round Trip Time - RTT)

ডিভাইস বাস্তবায়ন:

If device implementations include support for Wi-Fi Location and expose the functionality to third-party apps, then they:

  • [C-1-1] MUST implement the WifiRttManager APIs as described in the SDK documentation .
  • [C-1-2] MUST declare the android.hardware.wifi.rtt feature flag.
  • [C-1-3] MUST randomize the source MAC address for each RTT burst which is executed while the Wi-Fi interface on which the RTT is being executed is not associated to an Access Point.
7.4.2.6. Wi-Fi Keepalive Offload

ডিভাইস বাস্তবায়ন:

  • SHOULD include support for Wi-Fi keepalive offload.

If device implementations include support for Wi-Fi keepalive offload and expose the functionality to third-party apps, they:

  • [C-1-1] MUST support the SocketKeepAlive API.

  • [C-1-2] MUST support at least three concurrent keepalive slots over Wi-Fi and at least one keepalive slot over cellular.

If device implementations do not include support for Wi-Fi keepalive offload, they:

7.4.2.7. Wi-Fi Easy Connect (Device Provisioning Protocol)

ডিভাইস বাস্তবায়ন:

If device implementations include support for Wi-Fi Easy Connect and expose the functionality to third-party apps, they:

7.4.3। ব্লুটুথ

If device implementations support Bluetooth Audio profile, they:

  • SHOULD support Advanced Audio Codecs and Bluetooth Audio Codecs (eg LDAC).

If device implementations support HFP, A2DP and AVRCP, they:

  • SHOULD support at least 5 total connected devices.

If device implementations declare android.hardware.vr.high_performance feature, they:

  • [C-1-1] MUST support Bluetooth 4.2 and Bluetooth LE Data Length Extension.

Android includes support for Bluetooth and Bluetooth Low Energy .

If device implementations include support for Bluetooth and Bluetooth Low Energy, they:

  • [C-2-1] MUST declare the relevant platform features ( android.hardware.bluetooth and android.hardware.bluetooth_le respectively) and implement the platform APIs.
  • SHOULD implement relevant Bluetooth profiles such as A2DP, AVRCP, OBEX, HFP, etc. as appropriate for the device.

If device implementations include support for Bluetooth Low Energy (BLE), they:

  • [C-3-1] MUST declare the hardware feature android.hardware.bluetooth_le .
  • [C-3-2] MUST enable the GATT (generic attribute profile) based Bluetooth APIs as described in the SDK documentation and android.bluetooth .
  • [C-3-3] MUST report the correct value for BluetoothAdapter.isOffloadedFilteringSupported() to indicate whether the filtering logic for the ScanFilter API classes is implemented.
  • [C-3-4] MUST report the correct value for BluetoothAdapter.isMultipleAdvertisementSupported() to indicate whether Low Energy Advertising is supported.
  • [C-3-5] MUST implement a Resolvable Private Address (RPA) timeout no longer than 15 minutes and rotate the address at timeout to protect user privacy when device is actively using BLE for scanning or advertising. To prevent timing attacks, timeout intervals MUST also be randomized between 5 and 15 minutes.
  • SHOULD support offloading of the filtering logic to the bluetooth chipset when implementing the ScanFilter API .
  • SHOULD support offloading of the batched scanning to the bluetooth chipset.
  • SHOULD support multi advertisement with at least 4 slots.

If device implementations support Bluetooth LE and use Bluetooth LE for location scanning, they:

  • [C-4-1] MUST provide a user affordance to enable/disable the value read through the System API BluetoothAdapter.isBleScanAlwaysAvailable() .

If device implementations include support for Bluetooth LE and Hearing Aids Profile, as described in Hearing Aid Audio Support Using Bluetooth LE , they:

7.4.4। নিয়ার-ফিল্ড কমিউনিকেশনস

ডিভাইস বাস্তবায়ন:

  • SHOULD include a transceiver and related hardware for Near-Field Communications (NFC).
  • [C-0-1] MUST implement android.nfc.NdefMessage and android.nfc.NdefRecord APIs even if they do not include support for NFC or declare the android.hardware.nfc feature as the classes represent a protocol-independent data representation format .

If device implementations include NFC hardware and plan to make it available to third-party apps, they:

  • [C-1-1] MUST report the android.hardware.nfc feature from the android.content.pm.PackageManager.hasSystemFeature() method .
  • MUST be capable of reading and writing NDEF messages via the following NFC standards as below:
  • [C-1-2] MUST be capable of acting as an NFC Forum reader/writer (as defined by the NFC Forum technical specification NFCForum-TS-DigitalProtocol-1.0) via the following NFC standards:
    • NfcA (ISO14443-3A)
    • NfcB (ISO14443-3B)
    • NfcF (JIS X 6319-4)
    • IsoDep (ISO 14443-4)
    • NFC Forum Tag Types 1, 2, 3, 4, 5 (defined by the NFC Forum)
  • [SR] STRONGLY RECOMMENDED to be capable of reading and writing NDEF messages as well as raw data via the following NFC standards. Note that while the NFC standards are stated as STRONGLY RECOMMENDED, the Compatibility Definition for a future version is planned to change these to MUST. These standards are optional in this version but will be required in future versions. Existing and new devices that run this version of Android are very strongly encouraged to meet these requirements now so they will be able to upgrade to the future platform releases.

  • [C-1-13] MUST poll for all supported technologies while in NFC discovery mode.

  • SHOULD be in NFC discovery mode while the device is awake with the screen active and the lock-screen unlocked.
  • SHOULD be capable of reading the barcode and URL (if encoded) of Thinfilm NFC Barcode products.

Note that publicly available links are not available for the JIS, ISO, and NFC Forum specifications cited above.

Android includes support for NFC Host Card Emulation (HCE) mode.

If device implementations include an NFC controller chipset capable of HCE (for NfcA and/or NfcB) and support Application ID (AID) routing, they:

  • [C-2-1] MUST report the android.hardware.nfc.hce feature constant.
  • [C-2-2] MUST support NFC HCE APIs as defined in the Android SDK.

If device implementations include an NFC controller chipset capable of HCE for NfcF, and implement the feature for third-party applications, they:

  • [C-3-1] MUST report the android.hardware.nfc.hcef feature constant.
  • [C-3-2] MUST implement the NfcF Card Emulation APIs as defined in the Android SDK.

If device implementations include general NFC support as described in this section and support MIFARE technologies (MIFARE Classic, MIFARE Ultralight, NDEF on MIFARE Classic) in the reader/writer role, they:

  • [C-4-1] MUST implement the corresponding Android APIs as documented by the Android SDK.
  • [C-4-2] MUST report the feature com.nxp.mifare from the android.content.pm.PackageManager.hasSystemFeature () method. Note that this is not a standard Android feature and as such does not appear as a constant in the android.content.pm.PackageManager class.

7.4.5। Networking protocols and APIs

7.4.5.1। ন্যূনতম নেটওয়ার্ক ক্ষমতা

ডিভাইস বাস্তবায়ন:

  • [C-0-1] MUST include support for one or more forms of data networking. Specifically, device implementations MUST include support for at least one data standard capable of 200 Kbit/sec or greater. Examples of technologies that satisfy this requirement include EDGE, HSPA, EV-DO, 802.11g, Ethernet and Bluetooth PAN.
  • SHOULD also include support for at least one common wireless data standard, such as 802.11 (Wi-Fi), when a physical networking standard (such as Ethernet) is the primary data connection.
  • MAY implement more than one form of data connectivity.
7.4.5.2। IPv6

ডিভাইস বাস্তবায়ন:

  • [C-0-2] MUST include an IPv6 networking stack and support IPv6 communication using the managed APIs, such as java.net.Socket and java.net.URLConnection , as well as the native APIs, such as AF_INET6 sockets.
  • [C-0-3] MUST enable IPv6 by default.
  • MUST ensure that IPv6 communication is as reliable as IPv4, for example:
    • [C-0-4] MUST maintain IPv6 connectivity in doze mode.
    • [C-0-5] Rate-limiting MUST NOT cause the device to lose IPv6 connectivity on any IPv6-compliant network that uses RA lifetimes of at least 180 seconds.
  • [C-0-6] MUST provide third-party applications with direct IPv6 connectivity to the network when connected to an IPv6 network, without any form of address or port translation happening locally on the device. Both managed APIs such as Socket#getLocalAddress or Socket#getLocalPort ) and NDK APIs such as getsockname() or IPV6_PKTINFO MUST return the IP address and port that is actually used to send and receive packets on the network and is visible as the source ip and port to internet (web) servers.

The required level of IPv6 support depends on the network type, as shown in the following requirements.

If device implementations support Wi-Fi, they:

  • [C-1-1] MUST support dual-stack and IPv6-only operation on Wi-Fi.

If device implementations support Ethernet, they:

  • [C-2-1] MUST support dual-stack and IPv6-only operation on Ethernet.

If device implementations support Cellular data, they:

  • [C-3-1] MUST support IPv6 operation (IPv6-only and possibly dual-stack) on cellular.

If device implementations support more than one network type (eg, Wi-Fi and cellular data), they:

  • [C-4-1] MUST simultaneously meet the above requirements on each network when the device is simultaneously connected to more than one network type.
7.4.5.3। Captive Portals

A captive portal refers to a network that requires sign-in in order to obtain internet access.

If device implementations provide a complete implementation of the android.webkit.Webview API , they:

  • [C-1-1] MUST provide a captive portal application to handle the intent ACTION_CAPTIVE_PORTAL_SIGN_IN and display the captive portal login page, by sending that intent, on call to the System API ConnectivityManager#startCaptivePortalApp(Network, Bundle) .
  • [C-1-2] MUST perform detection of captive portals and support login through the captive portal application when the device is connected to any network type, including cellular/mobile network, WiFi, Ethernet or Bluetooth.
  • [C-1-3] MUST support logging in to captive portals using cleartext DNS when the device is configured to use private DNS strict mode.
  • [C-1-4] MUST use encrypted DNS as per the SDK documentation for android.net.LinkProperties.getPrivateDnsServerName and android.net.LinkProperties.isPrivateDnsActive for all network traffic that is not explicitly communicating with the captive portal.
  • [C-1-5] MUST ensure that, while the user is logging in to a captive portal, the default network used by applications (as returned by ConnectivityManager.getActiveNetwork , ConnectivityManager.registerDefaultNetworkCallback , and used by default by Java networking APIs such as java.net.Socket, and native APIs such as connect()) is any other available network that provides internet access, if available.

7.4.6। সিঙ্ক সেটিংস

ডিভাইস বাস্তবায়ন:

7.4.7। ডেটা সেভার

If device implementations include a metered connection, they are:

  • [SR] STRONGLY RECOMMENDED to provide the data saver mode.

If device implementations provide the data saver mode, they:

  • [C-1-1] MUST support all the APIs in the ConnectivityManager class as described in the SDK documentation

If device implementations do not provide the data saver mode, they:

7.4.8। Secure Elements

If device implementations support Open Mobile API -capable secure elements and make them available to third-party apps, they:

7.5। ক্যামেরা

If device implementations include at least one camera, they:

  • [C-1-1] MUST declare the android.hardware.camera.any feature flag.
  • [C-1-2] MUST be possible for an application to simultaneously allocate 3 RGBA_8888 bitmaps equal to the size of the images produced by the largest-resolution camera sensor on the device, while camera is open for the purpose of basic preview and still ক্যাপচার
  • [C-1-3] MUST ensure that the preinstalled default camera application handling intents MediaStore.ACTION_IMAGE_CAPTURE , MediaStore.ACTION_IMAGE_CAPTURE_SECURE , or MediaStore.ACTION_VIDEO_CAPTURE , is responsible for removing the user location in the image metadata before sending it to the receiving application when the receiving application does not have ACCESS_FINE_LOCATION .

7.5.1। রিয়ার-ফেসিং ক্যামেরা

A rear-facing camera is a camera located on the side of the device opposite the display; that is, it images scenes on the far side of the device, like a traditional camera.

ডিভাইস বাস্তবায়ন:

  • SHOULD include a rear-facing camera.

If device implementations include at least one rear-facing camera, they:

  • [C-1-1] MUST report the feature flag android.hardware.camera and android.hardware.camera.any .
  • [C-1-2] MUST have a resolution of at least 2 megapixels.
  • SHOULD have either hardware auto-focus or software auto-focus implemented in the camera driver (transparent to application software).
  • MAY have fixed-focus or EDOF (extended depth of field) hardware.
  • MAY include a flash.

If the camera includes a flash:

  • [C-2-1] the flash lamp MUST NOT be lit while an android.hardware.Camera.PreviewCallback instance has been registered on a Camera preview surface, unless the application has explicitly enabled the flash by enabling the FLASH_MODE_AUTO or FLASH_MODE_ON attributes of a Camera.Parameters object. Note that this constraint does not apply to the device's built-in system camera application, but only to third-party applications using Camera.PreviewCallback .

7.5.2। ফ্রন্ট-ফেসিং ক্যামেরা

A front-facing camera is a camera located on the same side of the device as the display; that is, a camera typically used to image the user, such as for video conferencing and similar applications.

ডিভাইস বাস্তবায়ন:

  • MAY include a front-facing camera.

If device implementations include at least one front-facing camera, they:

  • [C-1-1] MUST report the feature flag android.hardware.camera.any and android.hardware.camera.front .
  • [C-1-2] MUST have a resolution of at least VGA (640x480 pixels).
  • [C-1-3] MUST NOT use a front-facing camera as the default for the Camera API and MUST NOT configure the API to treat a front-facing camera as the default rear-facing camera, even if it is the only camera ডিভাইসে
  • [C-1-4] The camera preview MUST be mirrored horizontally relative to the orientation specified by the application when the current application has explicitly requested that the Camera display be rotated via a call to the android.hardware.Camera.setDisplayOrientation() method . Conversely, the preview MUST be mirrored along the device's default horizontal axis when the current application does not explicitly request that the Camera display be rotated via a call to the android.hardware.Camera.setDisplayOrientation() method.
  • [C-1-5] MUST NOT mirror the final captured still image or video streams returned to application callbacks or committed to media storage.
  • [C-1-6] MUST mirror the image displayed by the postview in the same manner as the camera preview image stream.
  • MAY include features (such as auto-focus, flash, etc.) available to rear-facing cameras as described in section 7.5.1 .

If device implementations are capable of being rotated by user (such as automatically via an accelerometer or manually via user input):

  • [C-2-1] The camera preview MUST be mirrored horizontally relative to the device's current orientation.

7.5.3। বাহ্যিক ক্যামেরা

ডিভাইস বাস্তবায়ন:

  • MAY include support for an external camera that is not necessarily always connected.

If device implementations include support for an external camera, they:

  • [C-1-1] MUST declare the platform feature flag android.hardware.camera.external and android.hardware camera.any .
  • [C-1-2] MUST support USB Video Class (UVC 1.0 or higher) if the external camera connects through the USB host port.
  • [C-1-3] MUST pass camera CTS tests with a physical external camera device connected. Details of camera CTS testing are available at source.android.com .
  • SHOULD support video compressions such as MJPEG to enable transfer of high-quality unencoded streams (ie raw or independently compressed picture streams).
  • MAY support multiple cameras.
  • MAY support camera-based video encoding.

If camera-based video encoding is supported:

  • [C-2-1] A simultaneous unencoded / MJPEG stream (QVGA or greater resolution) MUST be accessible to the device implementation.

7.5.4। ক্যামেরা API আচরণ

Android includes two API packages to access the camera, the newer android.hardware.camera2 API expose lower-level camera control to the app, including efficient zero-copy burst/streaming flows and per-frame controls of exposure, gain, white balance gains, color conversion, denoising, sharpening, and more.

The older API package, android.hardware.Camera , is marked as deprecated in Android 5.0 but as it should still be available for apps to use. Android device implementations MUST ensure the continued support of the API as described in this section and in the Android SDK.

All features that are common between the deprecated android.hardware.Camera class and the newer android.hardware.camera2 package MUST have equivalent performance and quality in both APIs. For example, with equivalent settings, autofocus speed and accuracy must be identical, and the quality of captured images must be the same. Features that depend on the different semantics of the two APIs are not required to have matching speed or quality, but SHOULD match as closely as possible.

Device implementations MUST implement the following behaviors for the camera-related APIs, for all available cameras. ডিভাইস বাস্তবায়ন:

  • [C-0-1] MUST use android.hardware.PixelFormat.YCbCr_420_SP for preview data provided to application callbacks when an application has never called android.hardware.Camera.Parameters.setPreviewFormat(int) .
  • [C-0-2] MUST further be in the NV21 encoding format when an application registers an android.hardware.Camera.PreviewCallback instance and the system calls the onPreviewFrame() method and the preview format is YCbCr_420_SP, the data in the byte[] passed into onPreviewFrame() . That is, NV21 MUST be the default.
  • [C-0-3] MUST support the YV12 format (as denoted by the android.graphics.ImageFormat.YV12 constant) for camera previews for both front- and rear-facing cameras for android.hardware.Camera . (The hardware video encoder and camera may use any native pixel format, but the device implementation MUST support conversion to YV12.)
  • [C-0-4] MUST support the android.hardware.ImageFormat.YUV_420_888 and android.hardware.ImageFormat.JPEG formats as outputs through the android.media.ImageReader API for android.hardware.camera2 devices that advertise REQUEST_AVAILABLE_CAPABILITIES_BACKWARD_COMPATIBLE capability in android.request.availableCapabilities .
  • [C-0-5] MUST still implement the full Camera API included in the Android SDK documentation, regardless of whether the device includes hardware autofocus or other capabilities. For instance, cameras that lack autofocus MUST still call any registered android.hardware.Camera.AutoFocusCallback instances (even though this has no relevance to a non-autofocus camera.) Note that this does apply to front-facing cameras; for instance, even though most front-facing cameras do not support autofocus, the API callbacks must still be “faked” as described.
  • [C-0-6] MUST recognize and honor each parameter name defined as a constant in the android.hardware.Camera.Parameters class and the android.hardware.camera2.CaptureRequest class. Conversely, device implementations MUST NOT honor or recognize string constants passed to the android.hardware.Camera.setParameters() method other than those documented as constants on the android.hardware.Camera.Parameters . That is, device implementations MUST support all standard Camera parameters if the hardware allows, and MUST NOT support custom Camera parameter types. For instance, device implementations that support image capture using high dynamic range (HDR) imaging techniques MUST support camera parameter Camera.SCENE_MODE_HDR .
  • [C-0-7] MUST report the proper level of support with the android.info.supportedHardwareLevel property as described in the Android SDK and report the appropriate framework feature flags .
  • [C-0-8] MUST also declare its individual camera capabilities of android.hardware.camera2 via the android.request.availableCapabilities property and declare the appropriate feature flags ; MUST define the feature flag if any of its attached camera devices supports the feature.
  • [C-0-9] MUST broadcast the Camera.ACTION_NEW_PICTURE intent whenever a new picture is taken by the camera and the entry of the picture has been added to the media store.
  • [C-0-10] MUST broadcast the Camera.ACTION_NEW_VIDEO intent whenever a new video is recorded by the camera and the entry of the picture has been added to the media store.
  • [C-0-11] MUST have all cameras accessible via the deprecated android.hardware.Camera API also accessible via the android.hardware.camera2 API.
  • [C-0-12] MUST ensure that the facial appearance is NOT altered, including but not limited to altering facial geometry, facial skin tone, or facial skin smoothening for any android.hardware.camera2 or android.hardware.Camera API.
  • [C-SR] For devices with multiple RGB cameras facing in the same direction, are STRONGLY RECOMMENDED to support a logical camera device that lists capability CameraMetadata.REQUEST_AVAILABLE_CAPABILITIES_LOGICAL_MULTI_CAMERA , consisting of all of the RGB cameras facing that direction as physical sub-devices.

If device implementations provide a proprietary camera API to 3rd-party apps, they:

7.5.5। ক্যামেরা ওরিয়েন্টেশন

If device implementations have a front- or a rear-facing camera, such camera(s):

  • [C-1-1] MUST be oriented so that the long dimension of the camera aligns with the screen's long dimension. That is, when the device is held in the landscape orientation, cameras MUST capture images in the landscape orientation. This applies regardless of the device's natural orientation; that is, it applies to landscape-primary devices as well as portrait-primary devices.

7.6। মেমরি এবং স্টোরেজ

7.6.1। ন্যূনতম মেমরি এবং স্টোরেজ

ডিভাইস বাস্তবায়ন:

  • [C-0-1] MUST include a Download Manager that applications MAY use to download data files and they MUST be capable of downloading individual files of at least 100MB in size to the default “cache” location.

7.6.2। অ্যাপ্লিকেশন শেয়ার্ড স্টোরেজ

ডিভাইস বাস্তবায়ন:

  • [C-0-1] MUST offer storage to be shared by applications, also often referred as “shared external storage”, "application shared storage" or by the Linux path "/sdcard" it is mounted on.
  • [C-0-2] MUST be configured with shared storage mounted by default, in other words “out of the box”, regardless of whether the storage is implemented on an internal storage component or a removable storage medium (eg Secure Digital card slot )
  • [C-0-3] MUST mount the application shared storage directly on the Linux path sdcard or include a Linux symbolic link from sdcard to the actual mount point.
  • [C-0-4] MUST enable scoped storage by default for all apps targeting API level 29 or above, except in the following situation:
    • When the app has requested android:requestLegacyExternalStorage="true" in their manifest.
  • [C-0-5] MUST redact location metadata, such as GPS Exif tags, stored in media files when those files are accessed through MediaStore , except when the calling app holds the ACCESS_MEDIA_LOCATION permission.

Device implementations MAY meet the above requirements using either of the following:

  • User-accessible removable storage, such as a Secure Digital (SD) card slot.
  • A portion of the internal (non-removable) storage as implemented in the Android Open Source Project (AOSP).

If device implementations use removable storage to satisfy the above requirements, they:

  • [C-1-1] MUST implement a toast or pop-up user interface warning the user when there is no storage medium inserted in the slot.
  • [C-1-2] MUST include a FAT-formatted storage medium (eg SD card) or show on the box and other material available at time of purchase that the storage medium has to be purchased separately.

If device implementations use a portion of the non-removable storage to satisfy the above requirements, they:

  • SHOULD use the AOSP implementation of the internal application shared storage.
  • MAY share the storage space with the application private data.

If device implementations have a USB port with USB peripheral mode support, they:

  • [C-3-1] MUST provide a mechanism to access the data on the application shared storage from a host computer.
  • SHOULD expose content from both storage paths transparently through Android's media scanner service and android.provider.MediaStore .
  • MAY use USB mass storage, but SHOULD use Media Transfer Protocol to satisfy this requirement.

If device implementations have a USB port with USB peripheral mode and support Media Transfer Protocol, they:

  • SHOULD be compatible with the reference Android MTP host, Android File Transfer .
  • SHOULD report a USB device class of 0x00.
  • SHOULD report a USB interface name of 'MTP'.

7.6.3। গ্রহণযোগ্য স্টোরেজ

If the device is expected to be mobile in nature unlike Television, device implementations are:

  • [SR] STRONGLY RECOMMENDED to implement the adoptable storage in a long-term stable location, since accidentally disconnecting them can cause data loss/corruption.

If the removable storage device port is in a long-term stable location, such as within the battery compartment or other protective cover, device implementations are:

7.7। ইউএসবি

If device implementations have a USB port, they:

  • SHOULD support USB peripheral mode and SHOULD support USB host mode.

7.7.1। ইউএসবি পেরিফেরাল মোড

If device implementations include a USB port supporting peripheral mode:

  • [C-1-1] The port MUST be connectable to a USB host that has a standard type-A or type-C USB port.
  • [C-1-2] MUST report the correct value of iSerialNumber in USB standard device descriptor through android.os.Build.SERIAL .
  • [C-1-3] MUST detect 1.5A and 3.0A chargers per the Type-C resistor standard and MUST detect changes in the advertisement if they support Type-C USB.
  • [SR] The port SHOULD use micro-B, micro-AB or Type-C USB form factor. Existing and new Android devices are STRONGLY RECOMMENDED to meet these requirements so they will be able to upgrade to the future platform releases.
  • [SR] The port SHOULD be located on the bottom of the device (according to natural orientation) or enable software screen rotation for all apps (including home screen), so that the display draws correctly when the device is oriented with the port at bottom . Existing and new Android devices are STRONGLY RECOMMENDED to meet these requirements so they will be able to upgrade to future platform releases.
  • [SR] SHOULD implement support to draw 1.5 A current during HS chirp and traffic as specified in the USB Battery Charging specification, revision 1.2 . Existing and new Android devices are STRONGLY RECOMMENDED to meet these requirements so they will be able to upgrade to the future platform releases.
  • [SR] STRONGLY RECOMMENDED to not support proprietary charging methods that modify Vbus voltage beyond default levels, or alter sink/source roles as such may result in interoperability issues with the chargers or devices that support the standard USB Power Delivery methods. While this is called out as "STRONGLY RECOMMENDED", in future Android versions we might REQUIRE all type-C devices to support full interoperability with standard type-C chargers.
  • [SR] STRONGLY RECOMMENDED to support Power Delivery for data and power role swapping when they support Type-C USB and USB host mode.
  • SHOULD support Power Delivery for high-voltage charging and support for Alternate Modes such as display out.
  • SHOULD implement the Android Open Accessory (AOA) API and specification as documented in the Android SDK documentation.

If device implementations include a USB port and implement the AOA specification, they:

  • [C-2-1] MUST declare support for the hardware feature android.hardware.usb.accessory .
  • [C-2-2] The USB mass storage class MUST include the string "android" at the end of the interface description iInterface string of the USB mass storage
  • SHOULD NOT implement AOAv2 audio documented in the Android Open Accessory Protocol 2.0 documentation. AOAv2 audio is deprecated as of Android version 8.0 (API level 26).

7.7.2। ইউএসবি হোস্ট মোড

If device implementations include a USB port supporting host mode, they:

  • [C-1-1] MUST implement the Android USB host API as documented in the Android SDK and MUST declare support for the hardware feature android.hardware.usb.host .
  • [C-1-2] MUST implement support to connect standard USB peripherals, in other words, they MUST either:
    • Have an on-device type C port or ship with cable(s) adapting an on-device proprietary port to a standard USB type-C port (USB Type-C device).
    • Have an on-device type A or ship with cable(s) adapting an on-device proprietary port to a standard USB type-A port.
    • Have an on-device micro-AB port, which SHOULD ship with a cable adapting to a standard type-A port.
  • [C-1-3] MUST NOT ship with an adapter converting from USB type A or micro-AB ports to a type-C port (receptacle).
  • [C-SR] Are STRONGLY RECOMMENDED to implement the USB audio class as documented in the Android SDK documentation.
  • SHOULD support charging the connected USB peripheral device while in host mode; advertising a source current of at least 1.5A as specified in the Termination Parameters section of the USB Type-C Cable and Connector Specification Revision 1.2 for USB Type-C connectors or using Charging Downstream Port(CDP) output current range as specified in the USB Battery Charging specifications, revision 1.2 for Micro-AB connectors.
  • SHOULD implement and support USB Type-C standards.

If device implementations include a USB port supporting host mode and the USB audio class, they:

  • [C-2-1] MUST support the USB HID class .
  • [C-2-2] MUST support the detection and mapping of the following HID data fields specified in the USB HID Usage Tables and the Voice Command Usage Request to the KeyEvent constants as below:
    • Usage Page (0xC) Usage ID (0x0CD): KEYCODE_MEDIA_PLAY_PAUSE
    • Usage Page (0xC) Usage ID (0x0E9): KEYCODE_VOLUME_UP
    • Usage Page (0xC) Usage ID (0x0EA): KEYCODE_VOLUME_DOWN
    • Usage Page (0xC) Usage ID (0x0CF): KEYCODE_VOICE_ASSIST

If device implementations include a USB port supporting host mode and the Storage Access Framework (SAF), they:

  • [C-3-1] MUST recognize any remotely connected MTP (Media Transfer Protocol) devices and make their contents accessible through the ACTION_GET_CONTENT , ACTION_OPEN_DOCUMENT , and ACTION_CREATE_DOCUMENT intents. .

If device implementations include a USB port supporting host mode and USB Type-C, they:

  • [C-4-1] MUST implement Dual Role Port functionality as defined by the USB Type-C specification (section 4.5.1.3.3).
  • [SR] STRONGLY RECOMMENDED to support DisplayPort, SHOULD support USB SuperSpeed Data Rates, and are STRONGLY RECOMMENDED to support Power Delivery for data and power role swapping.
  • [SR] STRONGLY RECOMMENDED to NOT support Audio Adapter Accessory Mode as described in the Appendix A of the USB Type-C Cable and Connector Specification Revision 1.2 .
  • SHOULD implement the Try.* model that is most appropriate for the device form factor. For example a handheld device SHOULD implement the Try.SNK model.

7.8। শ্রুতি

7.8.1। মাইক্রোফোন

If device implementations include a microphone, they:

  • [C-1-1] MUST report the android.hardware.microphone feature constant.
  • [C-1-2] MUST meet the audio recording requirements in section 5.4 .
  • [C-1-3] MUST meet the audio latency requirements in section 5.6 .
  • [SR] Are STRONGLY RECOMMENDED to support near-ultrasound recording as described in section 7.8.3 .

If device implementations omit a microphone, they:

  • [C-2-1] MUST NOT report the android.hardware.microphone feature constant.
  • [C-2-2] MUST implement the audio recording API at least as no-ops, per section 7 .

7.8.2। অডিও আউটপুট

If device implementations include a speaker or an audio/multimedia output port for an audio output peripheral such as a 4 conductor 3.5mm audio jack or USB host mode port using USB audio class , they:

  • [C-1-1] MUST report the android.hardware.audio.output feature constant.
  • [C-1-2] MUST meet the audio playback requirements in section 5.5 .
  • [C-1-3] MUST meet the audio latency requirements in section 5.6 .
  • [SR] STRONGLY RECOMMENDED to support near-ultrasound playback as described in section 7.8.3 .

If device implementations do not include a speaker or audio output port, they:

  • [C-2-1] MUST NOT report the android.hardware.audio.output feature.
  • [C-2-2] MUST implement the Audio Output related APIs as no-ops at least.

For the purposes of this section, an "output port" is a physical interface such as a 3.5mm audio jack, HDMI, or USB host mode port with USB audio class. Support for audio output over radio-based protocols such as Bluetooth, WiFi, or cellular network does not qualify as including an "output port".

7.8.2.1। এনালগ অডিও পোর্ট

In order to be compatible with the headsets and other audio accessories using the 3.5mm audio plug across the Android ecosystem, if device implementations include one or more analog audio ports, they:

  • [C-SR] Are STRONGLY RECOMMENDED to include at least one of the audio port(s) to be a 4 conductor 3.5mm audio jack.

If device implementations have a 4 conductor 3.5mm audio jack, they:

  • [C-1-1] MUST support audio playback to stereo headphones and stereo headsets with a microphone.
  • [C-1-2] MUST support TRRS audio plugs with the CTIA pin-out order.
  • [C-1-3] MUST support the detection and mapping to the keycodes for the following 3 ranges of equivalent impedance between the microphone and ground conductors on the audio plug:
    • 70 ohm or less : KEYCODE_HEADSETHOOK
    • 210-290 ohm : KEYCODE_VOLUME_UP
    • 360-680 ohm : KEYCODE_VOLUME_DOWN
  • [C-1-4] MUST trigger ACTION_HEADSET_PLUG upon a plug insert, but only after all contacts on plug are touching their relevant segments on the jack.
  • [C-1-5] MUST be capable of driving at least 150mV ± 10% of output voltage on a 32 ohm speaker impedance.
  • [C-1-6] MUST have a microphone bias voltage between 1.8V ~ 2.9V.
  • [C-1-7] MUST detect and map to the keycode for the following range of equivalent impedance between the microphone and ground conductors on the audio plug:
    • 110-180 ohm: KEYCODE_VOICE_ASSIST
  • [C-SR] Are STRONGLY RECOMMENDED to support audio plugs with the OMTP pin-out order.
  • [C-SR] Are STRONGLY RECOMMEND to support audio recording from stereo headsets with a microphone.

If device implementations have a 4 conductor 3.5mm audio jack and support a microphone, and broadcast the android.intent.action.HEADSET_PLUG with the extra value microphone set as 1, they:

  • [C-2-1] MUST support the detection of microphone on the plugged in audio accessory.
7.8.2.2. Digital Audio Ports

In order to be compatible with the headsets and other audio accessories using USB-C connectors and implementing (USB audio class) across the Android ecosystem as defined in Android USB headset specification .

See Section 2.2.1 for device-specific requirements.

7.8.3। কাছাকাছি-আল্ট্রাসাউন্ড

Near-Ultrasound audio is the 18.5 kHz to 20 kHz band.

ডিভাইস বাস্তবায়ন:

If PROPERTY_SUPPORT_MIC_NEAR_ULTRASOUND is "true", the following requirements MUST be met by the VOICE_RECOGNITION and UNPROCESSED audio sources:

  • [C-1-1] The microphone's mean power response in the 18.5 kHz to 20 kHz band MUST be no more than 15 dB below the response at 2 kHz.
  • [C-1-2] The microphone's unweighted signal to noise ratio over 18.5 kHz to 20 kHz for a 19 kHz tone at -26 dBFS MUST be no lower than 50 dB.

If PROPERTY_SUPPORT_SPEAKER_NEAR_ULTRASOUND is "true":

  • [C-2-1] The speaker's mean response in 18.5 kHz - 20 kHz MUST be no lower than 40 dB below the response at 2 kHz.

7.8.4. সংকেত অখণ্ডতা

Device implementations: * SHOULD provide a glitch-free audio signal path for both input and output streams on handheld devices, as defined by zero glitches measured during a test of one minute per path. Test using [OboeTester] (https://github.com/google/oboe/tree/master/apps/OboeTester) “Automated Glitch Test”.

The test requires an audio loopback dongle , used directly in a 3.5mm jack, and/or in combination with a USB-C to 3.5mm adapter. All audio output ports SHOULD be tested.

OboeTester currently supports AAudio paths, so the following combinations SHOULD be tested for glitches using AAudio:

Perf Mode শেয়ারিং Out Sample Rate In Chans Out Chans
LOW_LATENCY এক্সক্লুসিভ অনির্দিষ্ট 1 2
LOW_LATENCY এক্সক্লুসিভ অনির্দিষ্ট 2 1
LOW_LATENCY শেয়ার করা অনির্দিষ্ট 1 2
LOW_LATENCY শেয়ার করা অনির্দিষ্ট 2 1
কোনটিই নয় শেয়ার করা 48000 1 2
কোনটিই নয় শেয়ার করা 48000 2 1
কোনটিই নয় শেয়ার করা 44100 1 2
কোনটিই নয় শেয়ার করা 44100 2 1
কোনটিই নয় শেয়ার করা 16000 1 2
কোনটিই নয় শেয়ার করা 16000 2 1

A reliable stream SHOULD meet the following criteria for Signal to Noise Ratio (SNR) and Total Harmonic Distortion (THD) for 2000 Hz sine.

ট্রান্সডুসার THD এসএনআর
primary built-in speaker, measured using an external reference microphone < 3.0% >= 50 dB
primary built-in microphone, measured using an external reference speaker < 3.0% >= 50 dB
built-in analog 3.5 mm jacks, tested using loopback adapter < 1% >= 60 dB
USB adapters supplied with the phone, tested using loopback adapter < 1.0% >= 60 dB

৭.৯। ভার্চুয়াল বাস্তবতা

Android includes APIs and facilities to build "Virtual Reality" (VR) applications including high quality mobile VR experiences. Device implementations MUST properly implement these APIs and behaviors, as detailed in this section.

7.9.1। ভার্চুয়াল রিয়েলিটি মোড

Android includes support for VR Mode , a feature which handles stereoscopic rendering of notifications and disables monocular system UI components while a VR application has user focus.

7.9.2। Virtual Reality Mode - High Performance

If device implementations support VR mode, they:

  • [C-1-1] MUST have at least 2 physical cores.
  • [C-1-2] MUST declare the android.hardware.vr.high_performance feature.
  • [C-1-3] MUST support sustained performance mode.
  • [C-1-4] Is STRONGLY RECOMMENDED to support OpenGL ES 3.2.
  • [C-1-5] MUST support android.hardware.vulkan.level 0.
  • SHOULD support android.hardware.vulkan.level 1 or higher.
  • [C-1-6] MUST implement EGL_KHR_mutable_render_buffer , EGL_ANDROID_front_buffer_auto_refresh , EGL_ANDROID_get_native_client_buffer , EGL_KHR_fence_sync , EGL_KHR_wait_sync , EGL_IMG_context_priority , EGL_EXT_protected_content , EGL_EXT_image_gl_colorspace , and expose the extensions in the list of available EGL extensions.
  • [C-1-8] MUST implement GL_EXT_multisampled_render_to_texture2 , GL_OVR_multiview , GL_OVR_multiview2 , GL_EXT_protected_textures , and expose the extensions in the list of available GL extensions.
  • [C-SR] Are STRONGLY RECOMMENDED to implement GL_EXT_external_buffer , GL_EXT_EGL_image_array , GL_OVR_multiview_multisampled_render_to_texture , and expose the extensions in the list of available GL extensions.
  • [C-SR] Are STRONGLY RECOMMENDED to support Vulkan 1.1.
  • [C-SR] Are STRONGLY RECOMMENDED to implement VK_ANDROID_external_memory_android_hardware_buffer , VK_GOOGLE_display_timing , VK_KHR_shared_presentable_image , and expose it in the list of available Vulkan extensions.
  • [C-SR] Are STRONGLY RECOMMENDED to expose at least one Vulkan queue family where flags contain both VK_QUEUE_GRAPHICS_BIT and VK_QUEUE_COMPUTE_BIT , and queueCount is at least 2.
  • [C-1-7] The GPU and display MUST be able to synchronize access to the shared front buffer such that alternating-eye rendering of VR content at 60fps with two render contexts will be displayed with no visible tearing artifacts.
  • [C-1-9] MUST implement support for AHardwareBuffer flags AHARDWAREBUFFER_USAGE_GPU_DATA_BUFFER , AHARDWAREBUFFER_USAGE_SENSOR_DIRECT_DATA and AHARDWAREBUFFER_USAGE_PROTECTED_CONTENT as described in the NDK.
  • [C-1-10] MUST implement support for AHardwareBuffer s with any combination of the usage flags AHARDWAREBUFFER_USAGE_GPU_COLOR_OUTPUT , AHARDWAREBUFFER_USAGE_GPU_SAMPLED_IMAGE , AHARDWAREBUFFER_USAGE_PROTECTED_CONTENT for at least the following formats: AHARDWAREBUFFER_FORMAT_R5G6B5_UNORM , AHARDWAREBUFFER_FORMAT_R8G8B8A8_UNORM , AHARDWAREBUFFER_FORMAT_R10G10B10A2_UNORM , AHARDWAREBUFFER_FORMAT_R16G16B16A16_FLOAT .
  • [C-SR] Are STRONGLY RECOMMENDED to support the allocation of AHardwareBuffer s with more than one layer and flags and formats specified in C-1-10.
  • [C-1-11] MUST support H.264 decoding at least 3840 x 2160 at 30fps, compressed to an average of 40Mbps (equivalent to 4 instances of 1920 x1080 at 30 fps-10 Mbps or 2 instances of 1920 x 1080 at 60 fps-20 Mbps).
  • [C-1-12] MUST support HEVC and VP9, MUST be capable of decoding at least 1920 x 1080 at 30 fps compressed to an average of 10 Mbps and SHOULD be capable of decoding 3840 x 2160 at 30 fps-20 Mbps (equivalent to 4 instances of 1920 x 1080 at 30 fps-5 Mbps).
  • [C-1-13] MUST support HardwarePropertiesManager.getDeviceTemperatures API and return accurate values for skin temperature.
  • [C-1-14] MUST have an embedded screen, and its resolution MUST be at least 1920 x 1080.
  • [C-SR] Are STRONGLY RECOMMENDED to have a display resolution of at least 2560 x 1440.
  • [C-1-15] The display MUST update at least 60 Hz while in VR Mode.
  • [C-1-17] The display MUST support a low-persistence mode with ≤ 5 milliseconds persistence, persistence being defined as the amount of time for which a pixel is emitting light.
  • [C-1-18] MUST support Bluetooth 4.2 and Bluetooth LE Data Length Extension section 7.4.3 .
  • [C-1-19] MUST support and properly report Direct Channel Type for all of the following default sensor types:
    • TYPE_ACCELEROMETER
    • TYPE_ACCELEROMETER_UNCALIBRATED
    • TYPE_GYROSCOPE
    • TYPE_GYROSCOPE_UNCALIBRATED
    • TYPE_MAGNETIC_FIELD
    • TYPE_MAGNETIC_FIELD_UNCALIBRATED
  • [C-SR] Are STRONGLY RECOMMENDED to support the TYPE_HARDWARE_BUFFER direct channel type for all Direct Channel Types listed above.
  • [C-1-21] MUST meet the gyroscope, accelerometer, and magnetometer related requirements for android.hardware.hifi_sensors , as specified in section 7.3.9 .
  • [C-SR] Are STRONGLY RECOMMENDED to support the android.hardware.sensor.hifi_sensors feature.
  • [C-1-22] MUST have end-to-end motion to photon latency not higher than 28 milliseconds.
  • [C-SR] Are STRONGLY RECOMMENDED to have end-to-end motion to photon latency not higher than 20 milliseconds.
  • [C-1-23] MUST have first-frame ratio, which is the ratio between the brightness of pixels on the first frame after a transition from black to white and the brightness of white pixels in steady state, of at least 85%.
  • [C-SR] Are STRONGLY RECOMMENDED to have first-frame ratio of at least 90%.
  • MAY provide an exclusive core to the foreground application and MAY support the Process.getExclusiveCores API to return the numbers of the cpu cores that are exclusive to the top foreground application.

If exclusive core is supported, then the core:

  • [C-2-1] MUST not allow any other userspace processes to run on it (except device drivers used by the application), but MAY allow some kernel processes to run as necessary.

7.10। হ্যাপটিক্স

See Section 2.2.1 for device-specific requirements.

7.11। Media Performance Class

The media performance class of the device implementation can be obtained from the android.os.Build.VERSION_CODES.MEDIA_PERFORMANCE_CLASS API. Requirements for media performance class are defined for each Android version starting with R (version 30). The special value of 0 designates that the device is not of a media performance class.

If device implementations return non-zero value for android.os.Build.VERSION_CODES.MEDIA_PERFORMANCE_CLASS , they:

  • [C-1-1] MUST return at least a value of android.os.Build.VERSION_CODES.R .

  • [C-1-2] MUST be a handheld device implementation.

  • [C-1-3] MUST meet all requirements for "Media Performance Class" described in section 2.2.7 .

See section 2.2.7 for device-specific requirements.

8. কর্মক্ষমতা এবং ক্ষমতা

Some minimum performance and power criteria are critical to the user experience and impact the baseline assumptions developers would have when developing an app.

8.1। ব্যবহারকারীর অভিজ্ঞতার ধারাবাহিকতা

A smooth user interface can be provided to the end user if there are certain minimum requirements to ensure a consistent frame rate and response times for applications and games. Device implementations, depending on the device type, MAY have measurable requirements for the user interface latency and task switching as described in section 2 .

8.2। ফাইল I/O অ্যাক্সেস কর্মক্ষমতা

Providing a common baseline for a consistent file access performance on the application private data storage ( /data partition) allows app developers to set a proper expectation that would help their software design. Device implementations, depending on the device type, MAY have certain requirements described in section 2 for the following read and write operations:

  • Sequential write performance . Measured by writing a 256MB file using 10MB write buffer.
  • Random write performance . Measured by writing a 256MB file using 4KB write buffer.
  • Sequential read performance . Measured by reading a 256MB file using 10MB write buffer.
  • Random read performance . Measured by reading a 256MB file using 4KB write buffer.

8.3। পাওয়ার-সেভিং মোড

If device implementations include features to improve device power management that are included in AOSP (eg App Standby Bucket, Doze) or extend the features that do not apply harder restrictions than the Rare App Standby Bucket , they:

  • [C-1-1] MUST NOT deviate from the AOSP implementation for the triggering, maintenance, wakeup algorithms and the use of global system settings of App Standby and Doze power-saving modes.
  • [C-1-2] MUST NOT deviate from the AOSP implementation for the use of global settings to manage the throttling of jobs, alarm and network for apps in each bucket for App standby.
  • [C-1-3] MUST NOT deviate from the AOSP implementation for the number of the App Standby Buckets used for App Standby.
  • [C-1-4] MUST implement App Standby Buckets and Doze as described in Power Management .
  • [C-1-5] MUST return true for PowerManager.isPowerSaveMode() when the device is on power save mode.
  • [C-SR] Are STRONGLY RECOMMENDED to provide user affordance to enable and disable the battery saver feature.
  • [C-SR] Are STRONGLY RECOMMENDED to provide user affordance to display all Apps that are exempted from App Standby and Doze power-saving modes.

If device implementations extend power management features that are included in AOSP and that extension applies more stringent restrictions than the Rare App Standby Bucket , refer to section 3.5.1 .

In addition to the power-saving modes, Android device implementations MAY implement any or all of the 4 sleeping power states as defined by the Advanced Configuration and Power Interface (ACPI).

If device implementations implement S4 power states as defined by the ACPI, they:

  • [C-1-1] MUST enter this state only after the user has taken an explicit action to put the device in an inactive state (eg by closing a lid that is physically part of the device or turning off a vehicle or television) and before the user re-activates the device (eg by opening the lid or turning the vehicle or television back on).

If device implementations implement S3 power states as defined by the ACPI, they:

  • [C-2-1] MUST meet C-1-1 above, or, MUST enter S3 state only when third-party applications do not need the system resources (eg the screen, CPU).

    Conversely, MUST exit from S3 state when third-party applications need the system resources, as described on this SDK.

    For example, while the third-party applications request to keep the screen on through FLAG_KEEP_SCREEN_ON or keep CPU running through PARTIAL_WAKE_LOCK , the device MUST NOT enter S3 state unless, as described in C-1-1, the user has taken explicit action to put the device in an inactive state. Conversely, at a time when a task that third-party apps implement through JobScheduler is triggered or Firebase Cloud Messaging is delivered to third-party apps, the device MUST exit the S3 state unless the user has put the device in an inactive state. These are not comprehensive examples and AOSP implements extensive wake-up signals that trigger a wakeup from this state.

৮.৪। পাওয়ার কনজাম্পশন অ্যাকাউন্টিং

A more accurate accounting and reporting of the power consumption provides the app developer both the incentives and the tools to optimize the power usage pattern of the application.

ডিভাইস বাস্তবায়ন:

  • [SR] STRONGLY RECOMMENDED to provide a per-component power profile that defines the current consumption value for each hardware component and the approximate battery drain caused by the components over time as documented in the Android Open Source Project site.
  • [SR] STRONGLY RECOMMENDED to report all power consumption values in milliampere hours (mAh).
  • [SR] STRONGLY RECOMMENDED to report CPU power consumption per each process's UID. অ্যান্ড্রয়েড ওপেন সোর্স প্রকল্প uid_cputime কার্নেল মডিউল বাস্তবায়নের মাধ্যমে প্রয়োজনীয়তা পূরণ করে।
  • [SR] STRONGLY RECOMMENDED to make this power usage available via the adb shell dumpsys batterystats shell command to the app developer.
  • SHOULD be attributed to the hardware component itself if unable to attribute hardware component power usage to an application.

8.5। ধারাবাহিক পারফরম্যান্স

Performance can fluctuate dramatically for high-performance long-running apps, either because of the other apps running in the background or the CPU throttling due to temperature limits. Android includes programmatic interfaces so that when the device is capable, the top foreground application can request that the system optimize the allocation of the resources to address such fluctuations.

ডিভাইস বাস্তবায়ন:

If device implementations report support of Sustained Performance Mode, they:

  • [C-1-1] MUST provide the top foreground application a consistent level of performance for at least 30 minutes, when the app requests it.
  • [C-1-2] MUST honor the Window.setSustainedPerformanceMode() API and other related APIs.

If device implementations include two or more CPU cores, they:

  • SHOULD provide at least one exclusive core that can be reserved by the top foreground application.

If device implementations support reserving one exclusive core for the top foreground application, they:

  • [C-2-1] MUST report through the Process.getExclusiveCores() API method the ID numbers of the exclusive cores that can be reserved by the top foreground application.
  • [C-2-2] MUST not allow any user space processes except the device drivers used by the application to run on the exclusive cores, but MAY allow some kernel processes to run as necessary.

If device implementations do not support an exclusive core, they:

9. নিরাপত্তা মডেল সামঞ্জস্য

ডিভাইস বাস্তবায়ন:

  • [C-0-1] MUST implement a security model consistent with the Android platform security model as defined in Security and Permissions reference document in the APIs in the Android developer documentation.

  • [C-0-2] MUST support installation of self-signed applications without requiring any additional permissions/certificates from any third parties/authorities. Specifically, compatible devices MUST support the security mechanisms described in the follow subsections.

9.1। অনুমতি

ডিভাইস বাস্তবায়ন:

  • [C-0-1] MUST support the Android permissions model as defined in the Android developer documentation. Specifically, they MUST enforce each permission defined as described in the SDK documentation; no permissions may be omitted, altered, or ignored.

  • MAY add additional permissions, provided the new permission ID strings are not in the android.\* namespace.

  • [C-0-2] Permissions with a protectionLevel of PROTECTION_FLAG_PRIVILEGED MUST only be granted to apps preinstalled in the privileged path(s) of the system image and within the subset of the explicitly allowlisted permissions for each app. The AOSP implementation meets this requirement by reading and honoring the allowlisted permissions for each app from the files in the etc/permissions/ path and using the system/priv-app path as the privileged path.

Permissions with a protection level of dangerous are runtime permissions. Applications with targetSdkVersion > 22 request them at runtime.

ডিভাইস বাস্তবায়ন:

  • [C-0-3] MUST show a dedicated interface for the user to decide whether to grant the requested runtime permissions and also provide an interface for the user to manage runtime permissions.
  • [C-0-4] MUST have one and only one implementation of both user interfaces.
  • [C-0-5] MUST NOT grant any runtime permissions to preinstalled apps unless:
    • The user's consent can be obtained before the application uses it.
    • The runtime permissions are associated with an intent pattern for which the preinstalled application is set as the default handler.
  • [C-0-6] MUST grant the android.permission.RECOVER_KEYSTORE permission only to system apps that register a properly secured Recovery Agent. A properly secured Recovery Agent is defined as an on-device software agent that synchronizes with an off-device remote storage, that is equipped with secure hardware with protection equivalent or stronger than what is described in Google Cloud Key Vault Service to prevent brute-force attacks on the lockscreen knowledge factor.

ডিভাইস বাস্তবায়ন:

  • [C-0-7] MUST adhere to Android location permission properties when an app requests the location or physical activity data through standard Android API or proprietary mechanism. Such data includes but not limited to:

    • Device's location (eg latitude and longitude).
    • Information that can be used to determine or estimate the device's location (eg SSID, BSSID, Cell ID, or location of the network that the device is connected to).
    • User's physical activity or classification of the physical activity.

More specifically, device implementations:

    *   [C-0-8] MUST obtain user consent to allow an app to access the
        location or physical activity data.
    *   [C-0-9] MUST grant a runtime permission ONLY to the app that holds
        sufficient permission as described on SDK.
        For example,

TelephonyManager#getServiceState requires android.permission.ACCESS_FINE_LOCATION ).

Permissions can be marked as restricted altering their behavior.

  • [C-0-10] Permissions marked with the flag hardRestricted MUST NOT be granted to an app unless:

    • An app APK file is in the system partition.
    • The user assigns a role that is associated with the hardRestricted permissions to an app.
    • The installer grants the hardRestricted to an app.
    • An app is granted the hardRestricted on an earlier Android version.
  • [C-0-11] Apps holding a softRestricted permission MUST get only limited access and MUST NOT gain full access until allowlisted as described in the SDK, where full and limited access is defined for each softRestricted permission (for example, READ_EXTERNAL_STORAGE ).

If device implementations provide a user affordance to choose which apps can draw on top of other apps with an activity that handles the ACTION_MANAGE_OVERLAY_PERMISSION intent, they:

  • [C-2-1] MUST ensure that all activities with intent filters for the ACTION_MANAGE_OVERLAY_PERMISSION intent have the same UI screen, regardless of the initiating app or any information it provides.

9.2। ইউআইডি এবং প্রক্রিয়া বিচ্ছিন্নতা

ডিভাইস বাস্তবায়ন:

  • [C-0-1] MUST support the Android application sandbox model, in which each application runs as a unique Unixstyle UID and in a separate process.
  • [C-0-2] MUST support running multiple applications as the same Linux user ID, provided that the applications are properly signed and constructed, as defined in the Security and Permissions reference .

9.3। ফাইল সিস্টেম অনুমতি

ডিভাইস বাস্তবায়ন:

9.4। বিকল্প মৃত্যুদন্ড পরিবেশন

Device implementations MUST keep consistency of the Android security and permission model, even if they include runtime environments that execute applications using some other software or technology than the Dalvik Executable Format or native code. অন্য কথায়:

  • [C-0-1] Alternate runtimes MUST themselves be Android applications, and abide by the standard Android security model, as described elsewhere in section 9 .

  • [C-0-2] Alternate runtimes MUST NOT be granted access to resources protected by permissions not requested in the runtime's AndroidManifest.xml file via the < uses-permission > mechanism.

  • [C-0-3] Alternate runtimes MUST NOT permit applications to make use of features protected by Android permissions restricted to system applications.

  • [C-0-4] Alternate runtimes MUST abide by the Android sandbox model and installed applications using an alternate runtime MUST NOT reuse the sandbox of any other app installed on the device, except through the standard Android mechanisms of shared user ID and signing certificate .

  • [C-0-5] Alternate runtimes MUST NOT launch with, grant, or be granted access to the sandboxes corresponding to other Android applications.

  • [C-0-6] Alternate runtimes MUST NOT be launched with, be granted, or grant to other applications any privileges of the superuser (root), or of any other user ID.

  • [C-0-7] When the .apk files of alternate runtimes are included in the system image of device implementations, it MUST be signed with a key distinct from the key used to sign other applications included with the device implementations.

  • [C-0-8] When installing applications, alternate runtimes MUST obtain user consent for the Android permissions used by the application.

  • [C-0-9] When an application needs to make use of a device resource for which there is a corresponding Android permission (such as Camera, GPS, etc.), the alternate runtime MUST inform the user that the application will be able to access that resource.

  • [C-0-10] When the runtime environment does not record application capabilities in this manner, the runtime environment MUST list all permissions held by the runtime itself when installing any application using that runtime.

  • Alternate runtimes SHOULD install apps via the PackageManager into separate Android sandboxes (Linux user IDs, etc.).

  • Alternate runtimes MAY provide a single Android sandbox shared by all applications using the alternate runtime.

9.5। মাল্টি-ইউজার সাপোর্ট

Android includes support for multiple users and provides support for full user isolation.

  • Device implementations MAY but SHOULD NOT enable multi-user if they use removable media for primary external storage.

If device implementations include multiple users, they:

  • [C-1-1] MUST meet the following requirements related to multi-user support .
  • [C-1-2] MUST, for each user, implement a security model consistent with the Android platform security model as defined in Security and Permissions reference document in the APIs.
  • [C-1-3] MUST have separate and isolated shared application storage (aka /sdcard ) directories for each user instance.
  • [C-1-4] MUST ensure that applications owned by and running on behalf a given user cannot list, read, or write to the files owned by any other user, even if the data of both users are stored on the same volume or নথি ব্যবস্থা.
  • [C-1-5] MUST encrypt the contents of the SD card when multiuser is enabled using a key stored only on non-removable media accessible only to the system if device implementations use removable media for the external storage APIs. As this will make the media unreadable by a host PC, device implementations will be required to switch to MTP or a similar system to provide host PCs with access to the current user's data.

9.6। প্রিমিয়াম এসএমএস সতর্কতা

Android includes support for warning users of any outgoing premium SMS message . Premium SMS messages are text messages sent to a service registered with a carrier that may incur a charge to the user.

If device implementations declare support for android.hardware.telephony , they:

  • [C-1-1] MUST warn users before sending a SMS message to numbers identified by regular expressions defined in /data/misc/sms/codes.xml file in the device. The upstream Android Open Source Project provides an implementation that satisfies this requirement.

৯.৭। নিরাপত্তা বৈশিষ্ট্য

Device implementations MUST ensure compliance with security features in both the kernel and platform as described below.

The Android Sandbox includes features that use the Security-Enhanced Linux (SELinux) mandatory access control (MAC) system, seccomp sandboxing, and other security features in the Linux kernel. ডিভাইস বাস্তবায়ন:

  • [C-0-1] MUST maintain compatibility with existing applications, even when SELinux or any other security features are implemented below the Android framework.
  • [C-0-2] MUST NOT have a visible user interface when a security violation is detected and successfully blocked by the security feature implemented below the Android framework, but MAY have a visible user interface when an unblocked security violation occurs resulting in a successful শোষণ
  • [C-0-3] MUST NOT make SELinux or any other security features implemented below the Android framework configurable to the user or app developer.
  • [C-0-4] MUST NOT allow an application that can affect another application through an API (such as a Device Administration API) to configure a policy that breaks compatibility.
  • [C-0-5] MUST split the media framework into multiple processes so that it is possible to more narrowly grant access for each process as described in the Android Open Source Project site.
  • [C-0-6] MUST implement a kernel application sandboxing mechanism which allows filtering of system calls using a configurable policy from multithreaded programs. The upstream Android Open Source Project meets this requirement through enabling the seccomp-BPF with threadgroup synchronization (TSYNC) as described in the Kernel Configuration section of source.android.com .

Kernel integrity and self-protection features are integral to Android security. ডিভাইস বাস্তবায়ন:

  • [C-0-7] MUST implement kernel stack buffer overflow protection mechanisms. Examples of such mechanisms are CC_STACKPROTECTOR_REGULAR and CONFIG_CC_STACKPROTECTOR_STRONG .
  • [C-0-8] MUST implement strict kernel memory protections where executable code is read-only, read-only data is non-executable and non-writable, and writable data is non-executable (eg CONFIG_DEBUG_RODATA or CONFIG_STRICT_KERNEL_RWX ).
  • [C-0-9] MUST implement static and dynamic object size bounds checking of copies between user-space and kernel-space (eg CONFIG_HARDENED_USERCOPY ) on devices originally shipping with API level 28 or higher.
  • [C-0-10] MUST NOT execute user-space memory when executing in the kernel mode (eg hardware PXN, or emulated via CONFIG_CPU_SW_DOMAIN_PAN or CONFIG_ARM64_SW_TTBR0_PAN ) on devices originally shipping with API level 28 or higher.
  • [C-0-11] MUST NOT read or write user-space memory in the kernel outside of normal usercopy access APIs (eg hardware PAN, or emulated via CONFIG_CPU_SW_DOMAIN_PAN or CONFIG_ARM64_SW_TTBR0_PAN ) on devices originally shipping with API level 28 or higher.
  • [C-0-12] MUST implement kernel page table isolation if the hardware is vulnerable to CVE-2017-5754 on all devices originally shipping with API level 28 or higher (eg CONFIG_PAGE_TABLE_ISOLATION or CONFIG_UNMAP_KERNEL_AT_EL0 ).
  • [C-0-13] MUST implement branch prediction hardening if the hardware is vulnerable to CVE-2017-5715 on all devices originally shipping with API level 28 or higher (eg CONFIG_HARDEN_BRANCH_PREDICTOR ).
  • [SR] STRONGLY RECOMMENDED to keep kernel data which is written only during initialization marked read-only after initialization (eg __ro_after_init ).
  • [C-SR] Are STRONGLY RECOMMENDED to randomize the layout of the kernel code and memory, and to avoid exposures that would compromise the randomization (eg CONFIG_RANDOMIZE_BASE with bootloader entropy via the /chosen/kaslr-seed Device Tree node or EFI_RNG_PROTOCOL ).

  • [C-SR] Are STRONGLY RECOMMENDED to enable control flow integrity (CFI) in the kernel to provide additional protection against code-reuse attacks (eg CONFIG_CFI_CLANG and CONFIG_SHADOW_CALL_STACK ).

  • [C-SR] Are STRONGLY RECOMMENDED not to disable Control-Flow Integrity (CFI), Shadow Call Stack (SCS) or Integer Overflow Sanitization (IntSan) on components that have it enabled.
  • [C-SR] Are STRONGLY RECOMMENDED to enable CFI, SCS, and IntSan for any additional security-sensitive userspace components as explained in CFI and IntSan .
  • [C-SR] Are STRONGLY RECOMMENDED to enable stack initialization in the kernel to prevent uses of uninitialized local variables ( CONFIG_INIT_STACK_ALL or CONFIG_INIT_STACK_ALL_ZERO ). Also, device implementations SHOULD NOT assume the value used by the compiler to initialize the locals.
  • [C-SR] Are STRONGLY RECOMMENDED to enable heap initialization in the kernel to prevent uses of uninitialized heap allocations ( CONFIG_INIT_ON_ALLOC_DEFAULT_ON ) and they SHOULD NOT assume the value used by the kernel to initialize those allocations.

If device implementations use a Linux kernel, they:

  • [C-1-1] MUST implement SELinux.
  • [C-1-2] MUST set SELinux to global enforcing mode.
  • [C-1-3] MUST configure all domains in enforcing mode. No permissive mode domains are allowed, including domains specific to a device/vendor.
  • [C-1-4] MUST NOT modify, omit, or replace the neverallow rules present within the system/sepolicy folder provided in the upstream Android Open Source Project (AOSP) and the policy MUST compile with all neverallow rules present, for both AOSP SELinux domains as well as device/vendor specific domains.
  • [C-1-5] MUST run third-party applications targeting API level 28 or higher in per-application SELinux sandboxes with per-app SELinux restrictions on each application's private data directory.
  • SHOULD retain the default SELinux policy provided in the system/sepolicy folder of the upstream Android Open Source Project and only further add to this policy for their own device-specific configuration.

If device implementations use kernel other than Linux, they:

  • [C-2-1] MUST use a mandatory access control system that is equivalent to SELinux.

Android contains multiple defense-in-depth features that are integral to device security.

৯.৮। গোপনীয়তা

9.8.1। ব্যবহারের ইতিহাস

Android stores the history of the user's choices and manages such history by UsageStatsManager .

ডিভাইস বাস্তবায়ন:

  • [C-0-1] MUST keep a reasonable retention period of such user history.
  • [SR] Are STRONGLY RECOMMENDED to keep the 14 days retention period as configured by default in the AOSP implementation.

Android stores the system events using the StatsLog identifiers, and manages such history via the StatsManager and the IncidentManager System API.

ডিভাইস বাস্তবায়ন:

  • [C-0-2] MUST only include the fields marked with DEST_AUTOMATIC in the incident report created by the System API class IncidentManager .
  • [C-0-3] MUST not use the system event identifiers to log any other event than what is described in the StatsLog SDK documents. If additional system events are logged, they MAY use a different atom identifier in the range between 100,000 and 200,000.

9.8.2। রেকর্ডিং

ডিভাইস বাস্তবায়ন:

  • [C-0-1] MUST NOT preload or distribute software components out-of-box that send the user's private information (eg keystrokes, text displayed on the screen, bugreport) off the device without the user's consent or clear ongoing notifications.
  • [C-0-2] MUST display and obtain explicit user consent that includes exactly the same message as AOSP whenever screen casting or screen recording is enabled via MediaProjection or proprietary APIs. MUST NOT provide users an affordance to disable future display of the user consent.
  • [C-0-3] MUST have an ongoing notification to the user while screen casting or screen recording is enabled. AOSP meets this requirement by showing an ongoing notification icon in the status bar.

If device implementations include functionality in the system that either captures the contents displayed on the screen and/or records the audio stream played on the device other than via the System API ContentCaptureService , or other proprietary means described in Section 9.8.6 Content Capture , they :

  • [C-1-1] MUST have an ongoing notification to the user whenever this functionality is enabled and actively capturing/recording.

If device implementations include a component enabled out-of-box, capable of recording ambient audio and/or record the audio played on the device to infer useful information about user's context, they:

  • [C-2-1] MUST NOT store in persistent on-device storage or transmit off the device the recorded raw audio or any format that can be converted back into the original audio or a near facsimile, except with explicit user consent.

9.8.3। সংযোগ

If device implementations have a USB port with USB peripheral mode support, they:

  • [C-1-1] MUST present a user interface asking for the user's consent before allowing access to the contents of the shared storage over the USB port.

9.8.4। নেটওয়ার্ক ট্রাফিক

ডিভাইস বাস্তবায়ন:

  • [C-0-1] MUST preinstall the same root certificates for the system-trusted Certificate Authority (CA) store as provided in the upstream Android Open Source Project.
  • [C-0-2] MUST ship with an empty user root CA store.
  • [C-0-3] MUST display a warning to the user indicating the network traffic may be monitored, when a user root CA is added.

If device traffic is routed through a VPN, device implementations:

  • [C-1-1] MUST display a warning to the user indicating either:
    • That network traffic may be monitored.
    • That network traffic is being routed through the specific VPN application providing the VPN.

If device implementations have a mechanism, enabled out-of-box by default, that routes network data traffic through a proxy server or VPN gateway (for example, preloading a VPN service with android.permission.CONTROL_VPN granted), they:

  • [C-2-1] MUST ask for the user's consent before enabling that mechanism, unless that VPN is enabled by the Device Policy Controller via the DevicePolicyManager.setAlwaysOnVpnPackage() , in which case the user does not need to provide a separate consent, but MUST only be notified.

If device implementations implement a user affordance to toggle on the "always-on VPN" function of a 3rd-party VPN app, they:

  • [C-3-1] MUST disable this user affordance for apps that do not support always-on VPN service in the AndroidManifest.xml file via setting the SERVICE_META_DATA_SUPPORTS_ALWAYS_ON attribute to false .

9.8.5। Device Identifiers

ডিভাইস বাস্তবায়ন:

  • [C-0-1] MUST prevent access to the device serial number and, where applicable, IMEI/MEID, SIM serial number, and International Mobile Subscriber Identity (IMSI) from an app, unless it meets one of the following requirements:
    • is a signed carrier app that is verified by device manufacturers.
    • has been granted the READ_PRIVILEGED_PHONE_STATE permission.
    • has carrier privileges as defined in UICC Carrier Privileges .
    • is a device owner or profile owner that has been granted the READ_PHONE_STATE permission.
    • (For SIM serial number/ICCID only) has the local regulations requirement that the app detect changes in the subscriber's identity.

৯.৮.৬। Content Capture

Android, through the System API ContentCaptureService , or by other proprietary means, supports a mechanism for device implementations to capture the following interactions between the applications and the user.

  • Text and graphics rendered on-screen, including but not limited to, notifications and assist data via AssistStructure API.
  • Media data, such as audio or video, recorded or played by the device.
  • Input events (eg key, mouse, gesture, voice, video, and accessibility).
  • Any other events that an application provides to the system via the Content Capture API or a similarly capable, proprietary API.
  • Any text or other data sent via the TextClassifier API to the System TextClassifier ie to the system service to understand the meaning of text, as well as generating predicted next actions based on the text.

If device implementations capture the data above, they:

  • [C-0-1] MUST encrypt all such data when stored in the device. This encryption MAY be carried out using Android File Based Encryption, or any of the ciphers listed as API version 26+ described in Cipher SDK .
  • [C-0-2] MUST NOT back up either raw or encrypted data using Android backup methods or any other back up methods.
  • [C-0-3] MUST only send all such data and the log of the device using a privacy-preserving mechanism. The privacy-preserving mechanism is defined as “those which allow only analysis in aggregate and prevent matching of logged events or derived outcomes to individual users”, to prevent any per-user data being introspectable (eg, implemented using a differential privacy technology such as RAPPOR ).
  • [C-0-4] MUST NOT associate such data with any user identity (such as Account ) on the device, except with explicit user consent each time the data is associated.
  • [C-0-5] MUST NOT share such data with other apps, except with explicit user consent every time it is shared.
  • [C-0-6] MUST provide user affordance to erase such data that the ContentCaptureService or the proprietary means collects if the data is stored in any form on the device.

If device implementations include a service that implements the System API ContentCaptureService , or any proprietary service that captures the data as described as above, they:

  • [C-1-1] MUST NOT allow users to replace the content capture service with a user-installable application or service and MUST only allow the preinstalled service to capture such data.
  • [C-1-2] MUST NOT allow any apps other than the preinstalled content capture service mechanism to be able to capture such data.
  • [C-1-3] MUST provide user affordance to disable the content capture service.
  • [C-1-4] MUST NOT omit user affordance to manage Android permissions that are held by the content capture service and follow Android permissions model as described in Section 9.1. অনুমতি
  • [C-SR] Are STRONGLY RECOMMENDED to keep the content capturing service components separate, for example, not binding the service or sharing process IDs, from other system components except for the following:

    • Telephony, Contacts, System UI, and Media

9.8.7। ক্লিপবোর্ড অ্যাক্সেস

ডিভাইস বাস্তবায়ন:

  • [C-0-1] MUST NOT return a clipped data on the clipboard (eg via the ClipboardManager API) unless the app is the default IME or is the app that currently has focus.

9.8.8. অবস্থান

ডিভাইস বাস্তবায়ন:

  • [C-0-1] MUST NOT turn on/off device location setting and Wi-Fi/Bluetooth scanning settings without explicit user consent or user initiation.
  • [C-0-2] MUST provide the user affordance to access location related information including recent location requests, app level permissions and usage of Wi-Fi/Bluetooth scanning for determining location.
  • [C-0-3] MUST ensure that the application using Emergency Location Bypass API [LocationRequest.setLocationSettingsIgnored()] is a user initiated emergency session (eg dial 911 or text to 911). For Automotive however, a vehicle MAY initiate an emergency session without active user interaction in the case a crash/accident is detected (eg to satisfy eCall requirements).
  • [C-0-4] MUST preserve the Emergency Location Bypass API's ability to bypass device location settings without changing the settings.
  • [C-0-5] MUST schedule a notification that reminds the user after an app in the background has accessed their location using the [ ACCESS_BACKGROUND_LOCATION ] permission.

9.8.9. ইনস্টল করা অ্যাপস

Android apps targeting API level 30 or above cannot see details about other installed apps by default (see Package visibility in the Android SDK documentation).

ডিভাইস বাস্তবায়ন:

  • [C-0-1] MUST NOT expose to any app targeting API level 30 or above details about any other installed app, unless the app is already able to see details about the other installed app through the managed APIs. This includes but is not limited to details exposed by any custom APIs added by the device implementer, or accessible via the filesystem.

9.8.10. Connectivity Bug Report

If device implementations generate bug reports using System API BUGREPORT_MODE_TELEPHONY with BugreportManager, they:

  • [C-1-1] MUST obtain user consent every time the System API BUGREPORT_MODE_TELEPHONY is called to generate a report and MUST NOT prompt the user to consent to all future requests from the application.
  • [C-1-2] MUST display and obtain explicit user consent when the reports are starting to be generated and MUST NOT return the generated report to the requesting app without explicit user consent.
  • [C-1-3] MUST generate requested reports containing at least the following information:
    • TelephonyDebugService dump
    • TelephonyRegistry dump
    • WifiService dump
    • ConnectivityService dump
    • A dump of the calling package's CarrierService instance (if bound)
    • Radio log buffer
  • [C-1-4] MUST NOT include the following in the generated reports:
    • Any kind of information unrelated to connectivity debugging.
    • Any kind of user-installed application traffic logs or detailed profiles of user-installed applications/packages (UIDs are okay, package names are not).
  • MAY include additional information that is not associated with any user identity. (eg vendor logs).

If device implementations include additional information (eg vendor logs) in the bug report and that information has privacy/security/battery/storage/memory impact, they:

  • [C-SR] Are STRONGLY RECOMMENDED to have a developer setting defaulted to disabled. The AOSP meets this by providing the Enable verbose vendor logging option in developer settings to include additional device-specific vendor logs in the bug reports.

9.8.11. Data blobs sharing

Android, through BlobStoreManager allows apps to contribute data blobs to the System to be shared with a selected set of apps.

If device implementations support shared data blobs as described in the SDK documentation , they:

9.9। ডেটা স্টোরেজ এনক্রিপশন

All devices MUST meet the requirements of section 9.9.1. Devices which launched on an API level earlier than that of this document are exempted from the requirements of sections 9.9.2 and 9.9.3; instead they MUST meet the requirements in section 9.9 of the Android Compatibility Definition document corresponding to the API level on which the device launched.

9.9.1। ডাইরেক্ট বুট

ডিভাইস বাস্তবায়ন:

  • [C-0-1] MUST implement the Direct Boot mode APIs even if they do not support Storage Encryption.

  • [C-0-2] The ACTION_LOCKED_BOOT_COMPLETED and ACTION_USER_UNLOCKED Intents MUST still be broadcast to signal Direct Boot aware applications that Device Encrypted (DE) and Credential Encrypted (CE) storage locations are available for user.

9.9.2। Encryption requirements

ডিভাইস বাস্তবায়ন:

  • [C-0-1] MUST encrypt the application private data ( /data partition), as well as the application shared storage partition ( /sdcard partition) if it is a permanent, non-removable part of the device.
  • [C-0-2] MUST enable the data storage encryption by default at the time the user has completed the out-of-box setup experience.
  • [C-0-3] MUST meet the above data storage encryption requirement by implementing one of the following two encryption methods:

9.9.3। Encryption Methods

If device implementations are encrypted, they:

  • [C-1-1] MUST boot up without challenging the user for credentials and allow Direct Boot aware apps to access to the Device Encrypted (DE) storage after the ACTION_LOCKED_BOOT_COMPLETED message is broadcasted.
  • [C-1-2] MUST only allow access to Credential Encrypted (CE) storage after the user has unlocked the device by supplying their credentials (eg. passcode, pin, pattern or fingerprint) and the ACTION_USER_UNLOCKED message is broadcasted.
  • [C-1-13] MUST NOT offer any method to unlock the CE protected storage without either the user-supplied credentials, a registered escrow key or a resume on reboot implementation meeting the requirements in section 9.9.4 .
  • [C-1-4] MUST use Verified Boot.

9.9.3.1. File Based Encryption with Metadata Encryption

If device implementations use File Based Encryption with Metadata Encryption, they:

  • [C-1-5] MUST encrypt file contents and filesystem metadata using AES-256-XTS or Adiantum. AES-256-XTS refers to the Advanced Encryption Standard with a 256-bit cipher key length, operated in XTS mode; the full length of the key is 512 bits. Adiantum refers to Adiantum-XChaCha12-AES, as specified at https://github.com/google/adiantum. Filesystem metadata is data such as file sizes, ownership, modes, and extended attributes (xattrs).
  • [C-1-6] MUST encrypt file names using AES-256-CBC-CTS or Adiantum.
  • [C-1-12] If the device has Advanced Encryption Standard (AES) instructions (such as ARMv8 Cryptography Extensions on ARM-based devices, or AES-NI on x86-based devices) then the AES-based options above for file name, file contents, and filesystem metadata encryption MUST be used, not Adiantum.
  • [C-1-13] MUST use a cryptographically strong and non-reversible key derivation function (eg HKDF-SHA512) to derive any needed subkeys (eg per-file keys) from the CE and DE keys. "Cryptographically strong and non-reversible" means that the key derivation function has a security strength of at least 256 bits and behaves as a pseudorandom function family over its inputs.
  • [C-1-14] MUST NOT use the same File Based Encryption (FBE) keys or subkeys for different cryptographic purposes (eg for both encryption and key derivation, or for two different encryption algorithms).

  • The keys protecting CE and DE storage areas and filesystem metadata:

  • [C-1-7] MUST be cryptographically bound to a hardware-backed Keystore. This keystore MUST be bound to Verified Boot and the device's hardware root of trust.

  • [C-1-8] CE keys MUST be bound to a user's lock screen credentials.
  • [C-1-9] CE keys MUST be bound to a default passcode when the user has not specified lock screen credentials.
  • [C-1-10] MUST be unique and distinct, in other words no user's CE or DE key matches any other user's CE or DE keys.
  • [C-1-11] MUST use the mandatorily supported ciphers, key lengths and modes.

  • SHOULD make preinstalled essential apps (eg Alarm, Phone, Messenger) Direct Boot aware.

The upstream Android Open Source project provides a preferred implementation of File Based Encryption based on the Linux kernel "fscrypt" encryption feature, and of Metadata Encryption based on the Linux kernel "dm-default-key" feature.

9.9.3.2. Per-User Block-Level Encryption

If device implementations use per-user block-level encryption, they:

  • [C-1-1] MUST enable multi-user support as described in section 9.5.
  • [C-1-2] MUST provide per-user partitions, either using raw partitions or logical volumes.
  • [C-1-3] MUST use unique and distinct encryption keys per-user for encryption of the underlying block devices.
  • [C-1-4] MUST use AES-256-XTS for block-level encryption of the user partitions.

  • The keys protecting the per-user block-level encrypted devices:

  • [C-1-5] MUST be cryptographically bound to a hardware-backed Keystore. This keystore MUST be bound to Verified Boot and the device's hardware root of trust.

  • [C-1-6] MUST be bound to the corresponding user's lock screen credentials.

Per-user block-level encryption can be implemented using the Linux kernel “dm-crypt” feature over per-user partitions.

9.9.4। Resume on Reboot

Resume on Reboot allows unlocking the CE storage of all apps, including those that do not yet support Direct Boot, after a reboot initiated by an OTA. This feature enables users to receive notifications from installed apps after the reboot.

An implementation of Resume-on-Reboot must continue to ensure that when a device falls into an attacker's hands, it is extremely difficult for that attacker to recover the user's CE-encrypted data, even if the device is powered on, CE storage is unlocked, and the user has unlocked the device after receiving an OTA. For insider attack resistance, we also assume the attacker gains access to broadcast cryptographic signing keys.

বিশেষভাবে:

  • [C-0-1] CE storage MUST NOT be readable even for the attacker who physically has the device and then has these capabilities and limitations:

    • Can use the signing key of any vendor or company to sign arbitrary messages.
    • Can cause an OTA to be received by the device.
    • Can modify the operation of any hardware (AP, flash etc) except as detailed below, but such modification involves a delay of at least an hour and a power cycle that destroys RAM contents.
    • Cannot modify the operation of tamper-resistant hardware (eg Titan M).
    • Cannot read the RAM of the live device.
    • Cannot obtain the user's credential (PIN, pattern, password) or otherwise cause it to be entered.

By way of example, a device implementation that implements and complies with all of the descriptions found here will be compliant with [C-0-1].

9.10। ডিভাইসের অখণ্ডতা

The following requirements ensure there is transparency to the status of the device integrity. ডিভাইস বাস্তবায়ন:

  • [C-0-1] MUST correctly report through the System API method PersistentDataBlockManager.getFlashLockState() whether their bootloader state permits flashing of the system image. The FLASH_LOCK_UNKNOWN state is reserved for device implementations upgrading from an earlier version of Android where this new system API method did not exist.

  • [C-0-2] MUST support Verified Boot for device integrity.

If device implementations are already launched without supporting Verified Boot on an earlier version of Android and can not add support for this feature with a system software update, they MAY be exempted from the requirement.

Verified Boot is a feature that guarantees the integrity of the device software. If device implementations support the feature, they:

  • [C-1-1] MUST declare the platform feature flag android.software.verified_boot .
  • [C-1-2] MUST perform verification on every boot sequence.
  • [C-1-3] MUST start verification from an immutable hardware key that is the root of trust and go all the way up to the system partition.
  • [C-1-4] MUST implement each stage of verification to check the integrity and authenticity of all the bytes in the next stage before executing the code in the next stage.
  • [C-1-5] MUST use verification algorithms as strong as current recommendations from NIST for hashing algorithms (SHA-256) and public key sizes (RSA-2048).
  • [C-1-6] MUST NOT allow boot to complete when system verification fails, unless the user consents to attempt booting anyway, in which case the data from any non-verified storage blocks MUST not be used.
  • [C-1-7] MUST NOT allow verified partitions on the device to be modified unless the user has explicitly unlocked the bootloader.
  • [C-SR] If there are multiple discrete chips in the device (eg radio, specialized image processor), the boot process of each of those chips is STRONGLY RECOMMENDED to verify every stage upon booting.
  • [C-1-8] MUST use tamper-evident storage: for storing whether the bootloader is unlocked. Tamper-evident storage means that the bootloader can detect if the storage has been tampered with from inside Android.
  • [C-1-9] MUST prompt the user, while using the device, and require physical confirmation before allowing a transition from bootloader locked mode to bootloader unlocked mode.
  • [C-1-10] MUST implement rollback protection for partitions used by Android (eg boot, system partitions) and use tamper-evident storage for storing the metadata used for determining the minimum allowable OS version.
  • [C-SR] Are STRONGLY RECOMMENDED to verify all privileged app APK files with a chain of trust rooted in partitions protected by Verified Boot.
  • [C-SR] Are STRONGLY RECOMMENDED to verify any executable artifacts loaded by a privileged app from outside its APK file (such as dynamically loaded code or compiled code) before executing them or STRONGLY RECOMMENDED not to execute them at all.
  • SHOULD implement rollback protection for any component with persistent firmware (eg modem, camera) and SHOULD use tamper-evident storage for storing the metadata used for determining the minimum allowable version.

If device implementations are already launched without supporting C-1-8 through C-1-10 on an earlier version of Android and can not add support for these requirements with a system software update, they MAY be exempted from the requirements.

The upstream Android Open Source Project provides a preferred implementation of this feature in the external/avb/ repository, which can be integrated into the bootloader used for loading Android.

ডিভাইস বাস্তবায়ন:

  • [C-0-3] MUST support cryptographically verifying file content against a trusted key without reading the whole file.
  • [C-0-4] MUST NOT allow the read requests on a protected file to succeed when the read content do not verify against a trusted key.

If device implementations are already launched without the ability to verify file content against a trusted key on an earlier Android version and can not add support for this feature with a system software update, they MAY be exempted from the requirement. The upstream Android Open Source project provides a preferred implementation of this feature based on the Linux kernel fs-verity feature.

ডিভাইস বাস্তবায়ন:

If device implementations support the Android Protected Confirmation API they:

  • [C-3-1] MUST report true for the ConfirmationPrompt.isSupported() API.

  • [C-3-2] MUST ensure that code running in the Android OS including its kernel, malicious or otherwise, cannot generate a positive response without user interaction.

  • [C-3-3] MUST ensure that the user has been able to review and approve the prompted message even in the event that the Android OS, including its kernel, is compromised.

9.11। কী এবং শংসাপত্র

The Android Keystore System allows app developers to store cryptographic keys in a container and use them in cryptographic operations through the KeyChain API or the Keystore API . ডিভাইস বাস্তবায়ন:

  • [C-0-1] MUST allow at least 8,192 keys to be imported or generated.
  • [C-0-2] The lock screen authentication MUST rate-limit attempts and MUST have an exponential backoff algorithm. Beyond 150 failed attempts, the delay MUST be at least 24 hours per attempt.
  • SHOULD not limit the number of keys that can be generated

When the device implementation supports a secure lock screen, it:

  • [C-1-1] MUST back up the keystore implementation with an isolated execution environment.
  • [C-1-2] MUST have implementations of RSA, AES, ECDSA and HMAC cryptographic algorithms and MD5, SHA1, and SHA-2 family hash functions to properly support the Android Keystore system's supported algorithms in an area that is securely isolated from the code running on the kernel and above. সুরক্ষিত বিচ্ছিন্নতা অবশ্যই সমস্ত সম্ভাব্য প্রক্রিয়াকে অবরুদ্ধ করতে হবে যার দ্বারা কার্নেল বা ইউজারস্পেস কোড ডিএমএ সহ বিচ্ছিন্ন পরিবেশের অভ্যন্তরীণ অবস্থা অ্যাক্সেস করতে পারে। আপস্ট্রিম অ্যান্ড্রয়েড ওপেন সোর্স প্রজেক্ট (AOSP) ট্রাস্টি বাস্তবায়ন ব্যবহার করে এই প্রয়োজনীয়তা পূরণ করে, কিন্তু অন্য একটি ARM TrustZone-ভিত্তিক সমাধান বা একটি সঠিক হাইপারভাইজার-ভিত্তিক বিচ্ছিন্নতার একটি তৃতীয় পক্ষের পর্যালোচনা করা নিরাপদ বাস্তবায়ন হল বিকল্প বিকল্প।
  • [C-1-3] MUST perform the lock screen authentication in the isolated execution environment and only when successful, allow the authentication-bound keys to be used. লক স্ক্রিন শংসাপত্রগুলি অবশ্যই এমনভাবে সংরক্ষণ করা উচিত যা শুধুমাত্র বিচ্ছিন্ন এক্সিকিউশন পরিবেশকে লক স্ক্রিন প্রমাণীকরণ করতে দেয়৷ আপস্ট্রিম অ্যান্ড্রয়েড ওপেন সোর্স প্রজেক্ট গেটকিপার হার্ডওয়্যার অ্যাবস্ট্রাকশন লেয়ার (HAL) এবং ট্রাস্টি প্রদান করে, যা এই প্রয়োজনীয়তা মেটাতে ব্যবহার করা যেতে পারে।
  • [C-1-4] MUST support key attestation where the attestation signing key is protected by secure hardware and signing is performed in secure hardware. প্রত্যয়ন স্বাক্ষরকারী কীগুলিকে ডিভাইস শনাক্তকারী হিসাবে ব্যবহার করা থেকে আটকাতে যথেষ্ট সংখ্যক ডিভাইস জুড়ে শেয়ার করা আবশ্যক৷ এই প্রয়োজনীয়তা পূরণের একটি উপায় হল একই প্রত্যয়ন কী শেয়ার করা যদি না একটি প্রদত্ত SKU-এর কমপক্ষে 100,000 ইউনিট তৈরি করা হয়। যদি একটি SKU-এর 100,000 ইউনিটের বেশি উত্পাদিত হয়, তাহলে প্রতিটি 100,000 ইউনিটের জন্য একটি ভিন্ন কী ব্যবহার করা যেতে পারে।

মনে রাখবেন যে যদি একটি ডিভাইস বাস্তবায়ন ইতিমধ্যেই একটি পূর্ববর্তী অ্যান্ড্রয়েড সংস্করণে চালু করা হয়, তাহলে এই ধরনের ডিভাইসটিকে একটি বিচ্ছিন্ন এক্সিকিউশন এনভায়রনমেন্ট দ্বারা সমর্থিত একটি কীস্টোর থাকা এবং কী প্রত্যয়ন সমর্থন করার প্রয়োজনীয়তা থেকে অব্যাহতি দেওয়া হয়, যদি না এটি android.hardware.fingerprint বৈশিষ্ট্যটি ঘোষণা করে যা একটি বিচ্ছিন্ন এক্সিকিউশন পরিবেশ দ্বারা সমর্থিত একটি কীস্টোর প্রয়োজন।

  • [C-1-5] MUST allow the user to choose the Sleep timeout for transition from the unlocked to the locked state, with a minimum allowable timeout up to 15 seconds. Automotive devices, that lock the screen whenever the head unit is turned off or the user is switched, MAY NOT have the Sleep timeout configuration.

৯.১১.১. Secure Lock Screen and Authentication

The AOSP implementation follows a tiered authentication model where a knowledge-factory based primary authentication can be backed by either a secondary strong biometric, or by weaker tertiary modalities.

ডিভাইস বাস্তবায়ন:

  • [C-SR] Are STRONGLY RECOMMENDED to set only one of the following as the primary authentication method:
    • A numerical PIN
    • An alphanumerical password
    • A swipe pattern on a grid of exactly 3x3 dots

Note that the above authentication methods are referred as the recommended primary authentication methods in this document.

If device implementations add or modify the recommended primary authentication methods and use a new authentication method as a secure way to lock the screen, the new authentication method:

If device implementations add or modify the authentication methods to unlock the lock screen if based on a known secret and use a new authentication method to be treated as a secure way to lock the screen:

  • [C-3-1] The entropy of the shortest allowed length of inputs MUST be greater than 10 bits.
  • [C-3-2] The maximum entropy of all possible inputs MUST be greater than 18 bits.
  • [C-3-3] The new authentication method MUST NOT replace any of the recommended primary authentication methods (ie PIN, pattern, password) implemented and provided in AOSP.
  • [C-3-4] The new authentication method MUST be disabled when the Device Policy Controller (DPC) application has set the password quality policy via the DevicePolicyManager.setPasswordQuality() method with a more restrictive quality constant than PASSWORD_QUALITY_SOMETHING .
  • [C-3-5] New authentication methods MUST either fall back to the recommended primary authentication methods (ie PIN, pattern, password) once every 72 hours or less OR clearly disclose to the user that some data will not be backed up in order to preserve the privacy of their data.

If device implementations add or modify the recommended primary authentication methods to unlock the lock screen and use a new authentication method that is based on biometrics to be treated as a secure way to lock the screen, the new method:

  • [C-4-1] MUST meet all requirements described in section 7.3.10 for Class 1 (formerly Convenience ).
  • [C-4-2] MUST have a fall-back mechanism to use one of the recommended primary authentication methods which is based on a known secret.
  • [C-4-3] MUST be disabled and only allow the recommended primary authentication to unlock the screen when the Device Policy Controller (DPC) application has set the keyguard feature policy by calling the method DevicePolicyManager.setKeyguardDisabledFeatures() , with any of the associated biometric flags (ie KEYGUARD_DISABLE_BIOMETRICS , KEYGUARD_DISABLE_FINGERPRINT , KEYGUARD_DISABLE_FACE , or KEYGUARD_DISABLE_IRIS ).

If the biometric authentication methods do not meet the requirements for Class 3 (formerly Strong ) as described in section 7.3.10 :

  • [C-5-1] The methods MUST be disabled if the Device Policy Controller (DPC) application has set the password quality policy via the DevicePolicyManager.setPasswordQuality() method with a more restrictive quality constant than PASSWORD_QUALITY_BIOMETRIC_WEAK .
  • [C-5-2] The user MUST be challenged for the recommended primary authentication (eg: PIN, pattern, password) as described in [C-1-7] and [C-1-8] in section 7.3.10 .
  • [C-5-3] The methods MUST NOT be treated as a secure lock screen, and MUST meet the requirements that start with C-8 in this section below.

If device implementations add or modify the authentication methods to unlock the lock screen and a new authentication method is based on a physical token or the location:

  • [C-6-1] They MUST have a fall-back mechanism to use one of the recommended primary authentication methods which is based on a known secret and meet the requirements to be treated as a secure lock screen.
  • [C-6-2] The new method MUST be disabled and only allow one of the recommended primary authentication methods to unlock the screen when the Device Policy Controller (DPC) application has set the policy with either the DevicePolicyManager.setKeyguardDisabledFeatures(KEYGUARD_DISABLE_TRUST_AGENTS) method or the DevicePolicyManager.setPasswordQuality() method with a more restrictive quality constant than PASSWORD_QUALITY_UNSPECIFIED .
  • [C-6-3] The user MUST be challenged for one of the recommended primary authentication methods (egPIN, pattern, password) at least once every 4 hours or less.
  • [C-6-4] The new method MUST NOT be treated as a secure lock screen and MUST follow the constraints listed in C-8 below.

If device implementations have a secure lock screen and include one or more trust agent, which implements the TrustAgentService System API, they:

  • [C-7-1] MUST have clear indication in the settings menu and on the lock screen when device lock is deferred or can be unlocked by trust agent(s). For example, AOSP meets this requirement by showing a text description for the "Automatically lock setting" and "Power button instantly locks" in the settings menu and a distinguishable icon on the lock screen.
  • [C-7-2] MUST respect and fully implement all trust agent APIs in the DevicePolicyManager class, such as the KEYGUARD_DISABLE_TRUST_AGENTS constant.
  • [C-7-3] MUST NOT fully implement the TrustAgentService.addEscrowToken() function on a device that is used as a primary personal device (eg handheld) but MAY fully implement the function on device implementations that are typically shared (eg Android Television or Automotive device).
  • [C-7-4] MUST encrypt all stored tokens added by TrustAgentService.addEscrowToken() .
  • [C-7-5] MUST NOT store the encryption key or escrow token on the same device where the key is used. For example, it is allowed for a key stored on a phone to unlock a user account on a TV. For Automotive devices, it is not allowed for the escrow token to be stored on any part of the vehicle.
  • [C-7-6] MUST inform the user about the security implications before enabling the escrow token to decrypt the data storage.
  • [C-7-7] MUST have a fall-back mechanism to use one of the recommended primary authentication methods.
  • [C-7-8] The user MUST be challenged for one of the recommended primary authentication (eg: PIN, pattern, password) methods at least once every 72 hours or less unless the safety of the user (eg driver distraction) is of উদ্বেগ
  • [C-7-9] The user MUST be challenged for one of the recommended primary authentication (eg: PIN, pattern, password) methods as described in [C-1-7] and [C-1-8] in section 7.3.10 , unless the safety of the user (eg driver distraction) is of concern.
  • [C-7-10] MUST NOT be treated as a secure lock screen and MUST follow the constraints listed in C-8 below.
  • [C-7-11] MUST NOT allow TrustAgents on primary personal devices (eg: handheld) to unlock the device, and can only use them to keep an already unlocked device in the unlocked state for up to a maximum of 4 hours. The default implementation of TrustManagerService in AOSP meets this requirement.
  • [C-7-12] MUST use a cryptographically secure (eg UKEY2) communication channel to pass the escrow token from the storage device to the target device.

If device implementations add or modify the authentication methods to unlock the lock screen that is not a secure lock screen as described above, and use a new authentication method to unlock the keyguard:

  • [C-8-1] The new method MUST be disabled when the Device Policy Controller (DPC) application has set the password quality policy via the DevicePolicyManager.setPasswordQuality() method with a more restrictive quality constant than PASSWORD_QUALITY_UNSPECIFIED .
  • [C-8-2] They MUST NOT reset the password expiration timers set by DevicePolicyManager.setPasswordExpirationTimeout() .
  • [C-8-3] They MUST NOT expose an API for use by third-party apps to determine the lock state.

9.11.2। StrongBox

The Android Keystore System allows app developers to store cryptographic keys in a dedicated secure processor as well as the isolated execution environment described above. Such a dedicated secure processor is called "StrongBox". Requirements C-1-3 through C-1-11 below define the requirements a device must meet to qualify as a StrongBox.

Device implementations that have a dedicated secure processor:

  • [C-SR] Are STRONGLY RECOMMENDED to support StrongBox. StrongBox will likely become a requirement in a future release.

If device implementations support StrongBox, they:

  • [C-1-1] MUST declare FEATURE_STRONGBOX_KEYSTORE .

  • [C-1-2] MUST provide dedicated secure hardware that is used to back keystore and secure user authentication. The dedicated secure hardware may be used for other purposes as well.

  • [C-1-3] MUST have a discrete CPU that shares no cache, DRAM, coprocessors or other core resources with the application processor (AP).

  • [C-1-4] MUST ensure that any peripherals shared with the AP cannot alter StrongBox processing in any way, or obtain any information from the StrongBox. The AP MAY disable or block access to StrongBox.

  • [C-1-5] MUST have an internal clock with reasonable accuracy (+-10%) that is immune to manipulation by the AP.

  • [C-1-6] MUST have a true random number generator that produces uniformly-distributed and unpredictable output.

  • [C-1-7] MUST have tamper resistance, including resistance against physical penetration, and glitching.

  • [C-1-8] MUST have side-channel resistance, including resistance against leaking information via power, timing, electromagnetic radiation, and thermal radiation side channels.

  • [C-1-9] MUST have secure storage which ensures confidentiality, integrity, authenticity, consistency, and freshness of the contents. The storage MUST NOT be able to be read or altered, except as permitted by the StrongBox APIs.

  • To validate compliance with [C-1-3] through [C-1-9], device implementations:

    • [C-1-10] MUST include the hardware that is certified against the Secure IC Protection Profile BSI-CC-PP-0084-2014 or evaluated by a nationally accredited testing laboratory incorporating High attack potential vulnerability assessment according to the Common Criteria Application of Attack Potential to Smartcards .
    • [C-1-11] MUST include the firmware that is evaluated by a nationally accredited testing laboratory incorporating High attack potential vulnerability assessment according to the Common Criteria Application of Attack Potential to Smartcards .
    • [C-SR] Are STRONGLY RECOMMENDED to include the hardware that is evaluated using a Security Target, Evaluation Assurance Level (EAL) 5, augmented by AVA_VAN.5. EAL 5 certification will likely become a requirement in a future release.
  • [C-SR] are STRONGLY RECOMMENDED to provide insider attack resistance (IAR), which means that an insider with access to firmware signing keys cannot produce firmware that causes the StrongBox to leak secrets, to bypass functional security requirements or otherwise enable access to sensitive ব্যবহারকারী তথ্য. The recommended way to implement IAR is to allow firmware updates only when the primary user password is provided via the IAuthSecret HAL.

9.11.3। পরিচয় শংসাপত্র

The Identity Credential System is defined and achieved by implementing all APIs in the android.security.identity.* package. These APIs allows app developers to store and retrieve user identity documents. ডিভাইস বাস্তবায়ন:

  • [C-SR] are STRONGLY RECOMMENDED to implement the Identity Credential System.

If device implementations implement the Identity Credential System, they:

  • [C-0-1] MUST return non-null for the IdentityCredentialStore#getInstance() method.

  • [C-0-2] MUST implement the Identity Credential System (eg the android.security.identity.* APIs) with code communicating with a trusted application in an area that is securely isolated from the code running on the kernel and above. সুরক্ষিত বিচ্ছিন্নতা অবশ্যই সমস্ত সম্ভাব্য প্রক্রিয়াকে অবরুদ্ধ করতে হবে যার দ্বারা কার্নেল বা ইউজারস্পেস কোড ডিএমএ সহ বিচ্ছিন্ন পরিবেশের অভ্যন্তরীণ অবস্থা অ্যাক্সেস করতে পারে।

  • [C-0-3] The cryptographic operations needed to implement the Identity Credential System (eg the android.security.identity.* APIs) MUST be performed entirely in the trusted application and private key material MUST never leave the isolated execution environment unless specifically required by higher-level APIs (eg the createEphemeralKeyPair() method).

  • [C-0-4] The trusted application MUST be implemented in a way such that its security properties are not affected (eg credential data is not released unless access control conditions are satisfied, MACs can't be produced for arbitrary data) even if Android is misbehaving or compromised.

9.12। ডেটা মুছে ফেলা

All device implementations:

  • [C-0-1] MUST provide users a mechanism to perform a "Factory Data Reset".
  • [C-0-2] MUST delete all data on the userdata filesystem.
  • [C-0-3] MUST delete the data in such a way that will satisfy relevant industry standards such as NIST SP800-88.
  • [C-0-4] MUST trigger the above "Factory Data Reset" process when the DevicePolicyManager.wipeData() API is called by the primary user's Device Policy Controller app.
  • MAY provide a fast data wipe option that conducts only a logical data erase.

৯.১৩। নিরাপদ বুট মোড

Android provides Safe Boot Mode, which allows users to boot up into a mode where only preinstalled system apps are allowed to run and all third-party apps are disabled. This mode, known as "Safe Boot Mode", provides the user the capability to uninstall potentially harmful third-party apps.

Device implementations are:

  • [SR] STRONGLY RECOMMENDED to implement Safe Boot Mode.

If device implementations implement Safe Boot Mode, they:

  • [C-1-1] MUST provide the user an option to enter Safe Boot Mode in such a way that is uninterruptible from third-party apps installed on the device, except when the third-party app is a Device Policy Controller and has set the UserManager.DISALLOW_SAFE_BOOT flag as true.

  • [C-1-2] MUST provide the user the capability to uninstall any third-party apps within Safe Mode.

  • SHOULD provide the user an option to enter Safe Boot Mode from the boot menu using a workflow that is different from that of a normal boot.

৯.১৪। স্বয়ংচালিত যানবাহন সিস্টেম বিচ্ছিন্নতা

Android Automotive devices are expected to exchange data with critical vehicle subsystems by using the vehicle HAL to send and receive messages over vehicle networks such as CAN bus.

The data exchange can be secured by implementing security features below the Android framework layers to prevent malicious or unintentional interaction with these subsystems.

9.15. সাবস্ক্রিপশন প্ল্যান

"Subscription plans" refer to the billing relationship plan details provided by a mobile carrier through SubscriptionManager.setSubscriptionPlans() .

All device implementations:

  • [C-0-1] MUST return subscription plans only to the mobile carrier app that has originally provided them.
  • [C-0-2] MUST NOT remotely back up or upload subscription plans.
  • [C-0-3] MUST only allow overrides, such as SubscriptionManager.setSubscriptionOverrideCongested() , from the mobile carrier app currently providing valid subscription plans.

9.16. Application Data Migration

If device implementations include a capability to migrate data from a device to another device and do not limit the application data it copies to what is configured by the application developer in the manifest via android:fullBackupContent attribute, they:

  • [C-1-1] MUST NOT initiate transfers of application data from devices on which the user has not set a primary authentication as described in 9.11.1 Secure Lock Screen and Authentication .
  • [C-1-2] MUST securely confirm the primary authentication on the source device and confirm with the user intent to copy the data on the source device before any data is transferred.
  • [C-1-3] MUST use security key attestation to ensure that both the source device and the target device in the device-to-device migration are legitimate Android devices and have a locked bootloader.
  • [C-1-4] MUST only migrate application data to the same application on the target device, with the same package name AND signing certificate.
  • [C-1-5] MUST show an indication that the source device has had data migrated by a device-to-device data migration in the settings menu. A user SHOULD NOT be able to remove this indication.

10. সফ্টওয়্যার সামঞ্জস্য পরীক্ষা

Device implementations MUST pass all tests described in this section. However, note that no software test package is fully comprehensive. For this reason, device implementers are STRONGLY RECOMMENDED to make the minimum number of changes as possible to the reference and preferred implementation of Android available from the Android Open Source Project. This will minimize the risk of introducing bugs that create incompatibilities requiring rework and potential device updates.

10.1। সামঞ্জস্য পরীক্ষা স্যুট

ডিভাইস বাস্তবায়ন:

  • [C-0-1] MUST pass the Android Compatibility Test Suite (CTS) available from the Android Open Source Project, using the final shipping software on the device.

  • [C-0-2] MUST ensure compatibility in cases of ambiguity in CTS and for any reimplementations of parts of the reference source code.

The CTS is designed to be run on an actual device. Like any software, the CTS may itself contain bugs. The CTS will be versioned independently of this Compatibility Definition, and multiple revisions of the CTS may be released for Android 11.

ডিভাইস বাস্তবায়ন:

  • [C-0-3] MUST pass the latest CTS version available at the time the device software is completed.

  • SHOULD use the reference implementation in the Android Open Source tree as much as possible.

10.2। CTS যাচাইকারী

The CTS Verifier is included with the Compatibility Test Suite, and is intended to be run by a human operator to test functionality that cannot be tested by an automated system, such as correct functioning of a camera and sensors.

ডিভাইস বাস্তবায়ন:

  • [C-0-1] MUST correctly execute all applicable cases in the CTS verifier.

The CTS Verifier has tests for many kinds of hardware, including some hardware that is optional.

ডিভাইস বাস্তবায়ন:

  • [C-0-2] MUST pass all tests for hardware that they possess; for instance, if a device possesses an accelerometer, it MUST correctly execute the Accelerometer test case in the CTS Verifier.

Test cases for features noted as optional by this Compatibility Definition Document MAY be skipped or omitted.

  • [C-0-2] Every device and every build MUST correctly run the CTS Verifier, as noted above. However, since many builds are very similar, device implementers are not expected to explicitly run the CTS Verifier on builds that differ only in trivial ways. Specifically, device implementations that differ from an implementation that has passed the CTS Verifier only by the set of included locales, branding, etc. MAY omit the CTS Verifier test.

11. আপডেটযোগ্য সফটওয়্যার

  • [C-0-1] Device implementations MUST include a mechanism to replace the entirety of the system software. The mechanism need not perform “live” upgrades—that is, a device restart MAY be required. Any method can be used, provided that it can replace the entirety of the software preinstalled on the device. For instance, any of the following approaches will satisfy this requirement:

    • “Over-the-air (OTA)” downloads with offline update via reboot.
    • “Tethered” updates over USB from a host PC.
    • “Offline” updates via a reboot and update from a file on removable storage.
  • [C-0-2] The update mechanism used MUST support updates without wiping user data. That is, the update mechanism MUST preserve application private data and application shared data. Note that the upstream Android software includes an update mechanism that satisfies this requirement.

  • [C-0-3] The entire update MUST be signed and the on-device update mechanism MUST verify the update and signature against a public key stored on device.

  • [C-SR] The signing mechanism is STRONGLY RECOMMENDED to hash the update with SHA-256 and validate the hash against the public key using ECDSA NIST P-256.

If the device implementations includes support for an unmetered data connection such as 802.11 or Bluetooth PAN (Personal Area Network) profile, then, they:

  • [C-1-1] MUST support OTA downloads with offline update via reboot.

For device implementations that are launching with Android 6.0 and later, the update mechanism SHOULD support verifying that the system image is binary identical to expected result following an OTA. The block-based OTA implementation in the upstream Android Open Source Project, added since Android 5.1, satisfies this requirement.

Also, device implementations SHOULD support A/B system updates . The AOSP implements this feature using the boot control HAL.

If an error is found in a device implementation after it has been released but within its reasonable product lifetime that is determined in consultation with the Android Compatibility Team to affect the compatibility of third-party applications, then:

  • [C-2-1] The device implementer MUST correct the error via a software update available that can be applied per the mechanism just described.

Android includes features that allow the Device Owner app (if present) to control the installation of system updates. If the system update subsystem for devices report android.software.device_admin then, they:

12. ডকুমেন্ট চেঞ্জলগ

For a summary of changes to the Compatibility Definition in this release:

For a summary of changes to individuals sections:

  1. ভূমিকা
  2. ডিভাইসের ধরন
  3. সফটওয়্যার
  4. অ্যাপ্লিকেশন প্যাকেজিং
  5. মাল্টিমিডিয়া
  6. Developer Tools and Options
  7. হার্ডওয়্যার সামঞ্জস্য
  8. কর্মক্ষমতা এবং ক্ষমতা
  9. নিরাপত্তা মডেল
  10. সফ্টওয়্যার সামঞ্জস্য পরীক্ষা
  11. Updatable Software
  12. Document Changelog
  13. যোগাযোগ করুন

12.1। চেঞ্জলগ দেখার টিপস

Changes are marked as follows:

  • সিডিডি
    Substantive changes to the compatibility requirements.

  • ডক্স
    Cosmetic or build related changes.

For best viewing, append the pretty=full and no-merges URL parameters to your changelog URLs.

13. আমাদের সাথে যোগাযোগ করুন

You can join the android-compatibility forum and ask for clarifications or bring up any issues that you think the document does not cover.