The tablet sensor fusion box is a larger version of the
sensor fusion box test rig with reinforced servo support to
handle large footprint Android devices such as tablets. The tablet sensor fusion
box is used to test tablets in the Camera ITS sensor_fusion test
and multi-camera sync test. The box provides a consistent test environment for
measuring timestamp accuracy of sensors for Android tablet devices, specifically
camera image sensors and gyroscopes.
This page includes a vendor we recommend for purchasing a pre-made box and describes the specifications needed for you to build your own.
Tablet sensor fusion box Rev. 2
The tablet sensor fusion box Rev. 2 is a revision of the tablet sensor fusion box that makes the servo more reliable and reduces the space the box needs. Rev. 2 has the following changes:
- Servo gearbox: The servo drives the tablet mount through a 9:1 servo gearbox that's mounted in a steel bracket. The gearbox carries the radial (overhung) load of the tablet mount, so the load doesn't sit on the servo spline, which prevents servo damage. The gearbox also increases the torque available to rotate the tablet mount, while keeping the same rotation range as the original design.
- Side door: A pop-open side door gives access to the inside of the box, so the box doesn't need clearance to open its large side panel.
- Upright orientation: The revised box doesn't have the four feet that let the original box lie on its side. Use the revised box standing upright, so that the tablet mount rotates vertically, the same way phones rotate in the sensor fusion box. Operating the revised box on its side, for example with added feet, hasn't been tested.
The following figure shows the tablet sensor fusion box Rev. 2:
Figure 1. Tablet sensor fusion box Rev. 2.
For the 3D CAD model (STEP) of the tablet sensor fusion box Rev. 2, download the Rev. 2 production files.
Purchase a tablet sensor fusion box
If you prefer to purchase a pre-built box, we recommend the following qualified vendor:
- JFT CO LTD 捷富通科技有限公司 (previously known as MYWAY DESIGN)
China: No. 40, Lane 22, Heai Road, Wujing Town, Minhang District, Shanghai, China
Taiwan: 4F., No. 163, Fu-Ying Road, XinZhuang District, New Taipei City 242, Taiwan
www.jftcoltd.com
service@jfttec.com or its.sales@jfttec.com
China:+86-021-64909136
Taiwan: 886-2-29089060
Tablet sensor fusion box hardware
If you prefer to build your own, the following sections describe the specifications and features of our design that you can follow when building your own.
The tablet sensor fusion box consists of plastic box components that are laser cut from computer-aided design (CAD) drawings and a servo control box.
For detailed CAD drawings and a bill of materials (BOM), download the tablet sensor fusion box production files.
The following figures show a 3D rendering and the physical dimensions of the tablet sensor fusion box:
Figure 2. Tablet sensor fusion box 3D rendering (original design).
Figure 3. Tablet sensor fusion box dimensions (original design).
Tablet sensor fusion box design specifications
The following describes design specifications for the tablet sensor fusion box and the tablet mount:
Tablet sensor fusion box design
- Large size supports tablets with dimensions up to 12" (300 mm).
- In the original design, the box lies on its feet, the tablet rotates on the turntable at the bottom, and the chart is mounted under the top panel. Rev. 2 stands upright, and the tablet rotates vertically.
- Servo hardware handles tablet weight and restrict motions to a single plane.
- Lights mounted above tablet eliminates "shadowing" during rotation.
Tablet mount design
- Tablet mount size: 500 mm x 500 mm.
- Bar clamps with rubber backing keep the tablets in place.
- Supports tablets with dimensions up to 400 mm x 450 mm.
- Metal-gear servo motor with servo block provides extra support. In Rev. 2, a 9:1 servo gearbox in a steel bracket replaces the servo block.
The following figure shows a tablet mounted on the tablet mount:
Figure 4. Tablet mount with tablet mounted.