bthf_interface_t 구조체 참조
bthf_interface_t 구조체 참조
#include < bt_hf.h >
데이터 필드 | |
size_t | 크기 |
bt_status_t (* | init )( bthf_callbacks_t *콜백, int max_hf_clients) |
bt_status_t (* | 연결 )(bt_bdaddr_t *bd_addr) |
bt_status_t (* | 연결 해제 )(bt_bdaddr_t *bd_addr) |
bt_status_t (* | connect_audio )(bt_bdaddr_t *bd_addr) |
bt_status_t (* | 연결 해제_오디오 )(bt_bdaddr_t *bd_addr) |
bt_status_t (* | start_voice_recognition )(bt_bdaddr_t *bd_addr) |
bt_status_t (* | stop_voice_recognition )(bt_bdaddr_t *bd_addr) |
bt_status_t (* | Volume_control )( bthf_volume_type_t 유형, int 볼륨, bt_bdaddr_t *bd_addr) |
bt_status_t (* | device_status_notification )( bthf_network_state_t ntk_state, bthf_service_type_t svc_type, int 신호, int batt_chg) |
bt_status_t (* | cops_response )(const char *cops, bt_bdaddr_t *bd_addr) |
bt_status_t (* | cind_response )(int svc, int num_active, int num_held, bthf_call_state_t call_setup_state, int signal, int roam, int batt_chg, bt_bdaddr_t *bd_addr) |
bt_status_t (* | formatted_at_response )(const char *rsp, bt_bdaddr_t *bd_addr) |
bt_status_t (* | at_response )( bthf_at_response_t response_code, int error_code, bt_bdaddr_t *bd_addr) |
bt_status_t (* | clcc_response )(int index, bthf_call_direction_t dir, bthf_call_state_t state, bthf_call_mode_t 모드, bthf_call_mpty_type_t mpty, const char *number, bthf_call_addrtype_t 유형, bt_bdaddr_t *bd_addr) |
bt_status_t (* | Phone_state_change )(int num_active, int num_held, bthf_call_state_t call_setup_state, const char *number, bthf_call_addrtype_t 유형) |
무효의(* | 정리 )(무효) |
bt_status_t (* | 구성_wbs )(bt_bdaddr_t *bd_addr, bthf_wbs_config_t 구성) |
상세 설명
현장 문서
bt_status_t (* at_response)( bthf_at_response_t response_code, int error_code, bt_bdaddr_t *bd_addr) |
bt_status_t (* cind_response)(int svc, int num_active, int num_held, bthf_call_state_t call_setup_state, int signal, int roam, int batt_chg, bt_bdaddr_t *bd_addr) |
bt_status_t (* clcc_response)(int index, bthf_call_direction_t dir, bthf_call_state_t state, bthf_call_mode_t mode, bthf_call_mpty_type_t mpty, const char *number, bthf_call_addrtype_t type, bt_bdaddr_t *bd_addr) |
bt_status_t (* 구성_wbs)(bt_bdaddr_t *bd_addr, bthf_wbs_config_t 구성) |
bt_status_t (* 연결)(bt_bdaddr_t *bd_addr) |
bt_status_t (* connect_audio)(bt_bdaddr_t *bd_addr) |
bt_status_t (* cops_response)(const char *cops, bt_bdaddr_t *bd_addr) |
bt_status_t (* device_status_notification)( bthf_network_state_t ntk_state, bthf_service_type_t svc_type, int signal, int batt_chg) |
bt_status_t (* 연결 해제)(bt_bdaddr_t *bd_addr) |
bt_status_t (* connect_audio)(bt_bdaddr_t *bd_addr) |
bt_status_t (* formatted_at_response)(const char *rsp, bt_bdaddr_t *bd_addr) |
bt_status_t (* init)( bthf_callbacks_t *콜백, int max_hf_clients) |
bt_status_t (*phone_state_change)(int num_active, int num_held, bthf_call_state_t call_setup_state, const char *number, bthf_call_addrtype_t 유형) |
bt_status_t (* start_voice_recognition)(bt_bdaddr_t *bd_addr) |
bt_status_t (* stop_voice_recognition)(bt_bdaddr_t *bd_addr) |
bt_status_t (* 볼륨 제어)( bthf_volume_type_t 유형, int 볼륨, bt_bdaddr_t *bd_addr) |
이 구조체에 대한 문서는 다음 파일에서 생성되었습니다.
- 하드웨어 /libhardware/include/hardware/bt_hf.h
bthf_interface_t 구조체 참조
bthf_interface_t 구조체 참조
#include < bt_hf.h >
데이터 필드 | |
size_t | 크기 |
bt_status_t (* | init )( bthf_callbacks_t *콜백, int max_hf_clients) |
bt_status_t (* | 연결 )(bt_bdaddr_t *bd_addr) |
bt_status_t (* | 연결 해제 )(bt_bdaddr_t *bd_addr) |
bt_status_t (* | connect_audio )(bt_bdaddr_t *bd_addr) |
bt_status_t (* | 연결 해제_오디오 )(bt_bdaddr_t *bd_addr) |
bt_status_t (* | start_voice_recognition )(bt_bdaddr_t *bd_addr) |
bt_status_t (* | stop_voice_recognition )(bt_bdaddr_t *bd_addr) |
bt_status_t (* | Volume_control )( bthf_volume_type_t 유형, int 볼륨, bt_bdaddr_t *bd_addr) |
bt_status_t (* | device_status_notification )( bthf_network_state_t ntk_state, bthf_service_type_t svc_type, int 신호, int batt_chg) |
bt_status_t (* | cops_response )(const char *cops, bt_bdaddr_t *bd_addr) |
bt_status_t (* | cind_response )(int svc, int num_active, int num_held, bthf_call_state_t call_setup_state, int signal, int roam, int batt_chg, bt_bdaddr_t *bd_addr) |
bt_status_t (* | formatted_at_response )(const char *rsp, bt_bdaddr_t *bd_addr) |
bt_status_t (* | at_response )( bthf_at_response_t response_code, int error_code, bt_bdaddr_t *bd_addr) |
bt_status_t (* | clcc_response )(int index, bthf_call_direction_t dir, bthf_call_state_t state, bthf_call_mode_t 모드, bthf_call_mpty_type_t mpty, const char *number, bthf_call_addrtype_t 유형, bt_bdaddr_t *bd_addr) |
bt_status_t (* | Phone_state_change )(int num_active, int num_held, bthf_call_state_t call_setup_state, const char *number, bthf_call_addrtype_t 유형) |
무효의(* | 정리 )(무효) |
bt_status_t (* | 구성_wbs )(bt_bdaddr_t *bd_addr, bthf_wbs_config_t 구성) |
상세 설명
현장 문서
bt_status_t (* at_response)( bthf_at_response_t response_code, int error_code, bt_bdaddr_t *bd_addr) |
bt_status_t (* cind_response)(int svc, int num_active, int num_held, bthf_call_state_t call_setup_state, int signal, int roam, int batt_chg, bt_bdaddr_t *bd_addr) |
bt_status_t (* clcc_response)(int index, bthf_call_direction_t dir, bthf_call_state_t state, bthf_call_mode_t mode, bthf_call_mpty_type_t mpty, const char *number, bthf_call_addrtype_t type, bt_bdaddr_t *bd_addr) |
bt_status_t (* 구성_wbs)(bt_bdaddr_t *bd_addr, bthf_wbs_config_t 구성) |
bt_status_t (* 연결)(bt_bdaddr_t *bd_addr) |
bt_status_t (* connect_audio)(bt_bdaddr_t *bd_addr) |
bt_status_t (* cops_response)(const char *cops, bt_bdaddr_t *bd_addr) |
bt_status_t (* device_status_notification)( bthf_network_state_t ntk_state, bthf_service_type_t svc_type, int signal, int batt_chg) |
bt_status_t (* 연결 해제)(bt_bdaddr_t *bd_addr) |
bt_status_t (* connect_audio)(bt_bdaddr_t *bd_addr) |
bt_status_t (* formatted_at_response)(const char *rsp, bt_bdaddr_t *bd_addr) |
bt_status_t (* init)( bthf_callbacks_t *콜백, int max_hf_clients) |
bt_status_t (*phone_state_change)(int num_active, int num_held, bthf_call_state_t call_setup_state, const char *number, bthf_call_addrtype_t 유형) |
bt_status_t (* start_voice_recognition)(bt_bdaddr_t *bd_addr) |
bt_status_t (* stop_voice_recognition)(bt_bdaddr_t *bd_addr) |
bt_status_t (* 볼륨 제어)( bthf_volume_type_t 유형, int 볼륨, bt_bdaddr_t *bd_addr) |
이 구조체에 대한 문서는 다음 파일에서 생성되었습니다.
- 하드웨어 /libhardware/include/hardware/bt_hf.h