Définition de la compatibilité Android 9

1. Introduction

Ce document énumère les exigences qui doivent être remplies pour que les appareils soient compatibles avec Android 9.

L'utilisation de « DOIT », « NE DOIT PAS », « OBLIGATOIRE », « DEVRAIT », « NE DEVRAIT PAS », « DEVRAIT », « NE DEVRAIT PAS », « RECOMMANDÉ », « PEUT » et « OPTIONNEL » est conforme à l'IETF. norme définie dans RFC2119 .

Tel qu'utilisé dans ce document, un « implémenteur de périphérique » ou « implémenteur » est une personne ou une organisation développant une solution matérielle/logicielle exécutant Android 9. Une « implémentation de périphérique » ou « implémentation » est la solution matérielle/logicielle ainsi développée.

Pour être considérées comme compatibles avec Android 9, les implémentations d'appareil DOIVENT répondre aux exigences présentées dans cette définition de compatibilité, y compris tous les documents incorporés par référence.

Lorsque cette définition ou les tests logiciels décrits dans la section 10 sont silencieux, ambigus ou incomplets, il est de la responsabilité de l'implémenteur du dispositif de garantir la compatibilité avec les implémentations existantes.

Pour cette raison, le projet Android Open Source est à la fois la référence et l’implémentation privilégiée d’Android. Il est FORTEMENT RECOMMANDÉ aux responsables de la mise en œuvre des appareils de baser leurs implémentations dans la plus grande mesure possible sur le code source « en amont » disponible à partir du projet Android Open Source. Bien que certains composants puissent hypothétiquement être remplacés par des implémentations alternatives, il est FORTEMENT RECOMMANDÉ de ne pas suivre cette pratique, car la réussite des tests logiciels deviendra beaucoup plus difficile. Il est de la responsabilité du responsable de la mise en œuvre de garantir une compatibilité comportementale totale avec l'implémentation Android standard, y compris et au-delà de la suite de tests de compatibilité. Notez enfin que certaines substitutions et modifications de composants sont explicitement interdites par ce document.

La plupart des ressources liées dans ce document sont dérivées directement ou indirectement du SDK Android et seront fonctionnellement identiques aux informations contenues dans la documentation de ce SDK. Dans tous les cas où cette définition de compatibilité ou la suite de tests de compatibilité est en désaccord avec la documentation du SDK, la documentation du SDK fait autorité. Tous les détails techniques fournis dans les ressources liées tout au long de ce document sont considérés par inclusion comme faisant partie de cette définition de compatibilité.

1.1 Structure des documents

1.1.1. Exigences par type d'appareil

La section 2 contient toutes les exigences qui s'appliquent à un type d'appareil spécifique. Chaque sous-section de la section 2 est dédiée à un type d'appareil spécifique.

Toutes les autres exigences, qui s'appliquent universellement à toutes les implémentations d'appareils Android, sont répertoriées dans les sections après la section 2 . Ces exigences sont référencées sous le nom d'« Exigences de base » dans ce document.

1.1.2. ID d'exigence

L’ID d’exigence est attribué pour les exigences MUST.

  • L'ID est attribué uniquement pour les exigences MUST.
  • Les exigences FORTEMENT RECOMMANDÉES sont marquées comme [SR] mais l'ID n'est pas attribué.
  • L'ID se compose de : ID de type d'appareil - ID de condition - ID d'exigence (par exemple C-0-1).

Chaque identifiant est défini comme ci-dessous :

  • ID du type d'appareil (voir plus dans 2. Types d'appareils )
    • C : Core (Exigences appliquées à toutes les implémentations d'appareils Android)
    • H : appareil portable Android
    • T : appareil Android Télévision
    • R : Implémentation d'Android Automotive
    • Onglet : Implémentation de la tablette Android
  • ID de condition
    • Lorsque l’exigence est inconditionnelle, cet ID est défini sur 0.
    • Lorsque l'exigence est conditionnelle, 1 est attribué pour la 1ère condition et le numéro s'incrémente de 1 au sein de la même section et du même type d'appareil.
  • ID d'exigence
    • Cet ID commence à 1 et s'incrémente de 1 dans la même section et la même condition.

1.1.3. ID d’exigence dans la section 2

L'ID d'exigence dans la section 2 commence par l'ID de section correspondant qui est suivi de l'ID d'exigence décrit ci-dessus.

  • L'ID de la section 2 se compose de : ID de section / ID de type d'appareil - ID de condition - ID d'exigence (par exemple 7.4.3/A-0-1).

2. Types d'appareils

Bien que le projet Android Open Source fournisse une pile logicielle qui peut être utilisée pour une variété de types d'appareils et de facteurs de forme, quelques types d'appareils disposent d'un écosystème de distribution d'applications relativement mieux établi.

Cette section décrit ces types de périphériques ainsi que les exigences et recommandations supplémentaires applicables à chaque type de périphérique.

Toutes les implémentations d'appareils Android qui ne correspondent à aucun des types d'appareils décrits DOIVENT néanmoins répondre à toutes les exigences des autres sections de cette définition de compatibilité.

2.1 Configurations des appareils

Pour connaître les principales différences de configuration matérielle par type de périphérique, consultez les exigences spécifiques au périphérique qui suivent dans cette section.

2.2. Configuration requise pour l'ordinateur de poche

Un appareil portable Android fait référence à une implémentation d'appareil Android qui est généralement utilisée en le tenant dans la main, comme un lecteur mp3, un téléphone ou une tablette.

Les implémentations d'appareils Android sont classées comme ordinateurs de poche si elles répondent à tous les critères suivants :

  • Disposez d'une source d'alimentation qui assure la mobilité, comme une batterie.
  • Avoir une taille d’écran diagonale physique comprise entre 2,5 et 8 pouces.

Les exigences supplémentaires indiquées dans le reste de cette section sont spécifiques aux implémentations d’appareils portables Android.

Remarque : les exigences qui ne s'appliquent pas aux tablettes Android sont signalées par un *.

2.2.1. Matériel

Implémentations d'appareils portables :

  • [ 7.1 .1.1/H-0-1] DOIT avoir un écran d'au moins 2,5 pouces en diagonale physique.
  • [ 7.1 .1.3/H-SR] Sont FORTEMENT RECOMMANDÉS pour offrir aux utilisateurs la possibilité de modifier la taille de l'affichage. (Densité de l'écran)

Si les implémentations d'appareils portables revendiquent la prise en charge des affichages à plage dynamique élevée via Configuration.isScreenHdr() , elles :

  • [ 7.1 .4.5/H-1-1] DOIT annoncer la prise en charge des extensions EGL_EXT_gl_colorspace_bt2020_pq , EGL_EXT_surface_SMPTE2086_metadata , EGL_EXT_surface_CTA861_3_metadata , VK_EXT_swapchain_colorspace et VK_EXT_hdr_metadata .

Implémentations d'appareils portables :

  • [ 7.1 .5/H-0-1] DOIT inclure la prise en charge du mode de compatibilité des applications héritées tel qu'implémenté par le code open source Android en amont. Autrement dit, les mises en œuvre de dispositifs NE DOIVENT PAS modifier les déclencheurs ou les seuils auxquels le mode de compatibilité est activé, et NE DOIVENT PAS modifier le comportement du mode de compatibilité lui-même.
  • [ 7.2 .1/H-0-1] DOIT inclure la prise en charge des applications tierces de l'éditeur de méthode d'entrée (IME).
  • [ 7.2 .3/H-0-1] DOIT fournir les fonctions Accueil, Récents et Retour.
  • [ 7.2 .3/H-0-2] DOIT envoyer à la fois l'événement d'appui normal et long de la fonction Retour ( KEYCODE_BACK ) à l'application de premier plan. Ces événements NE DOIVENT PAS être consommés par le système et PEUVENT être déclenchés par l'extérieur de l'appareil Android (par exemple, un clavier matériel externe connecté à l'appareil Android).
  • [ 7.2 .4/H-0-1] DOIT prendre en charge la saisie sur écran tactile.
  • [ 7.2 .4/H-SR] Sont FORTEMENT RECOMMANDÉS de lancer l'application d'assistance sélectionnée par l'utilisateur, c'est-à-dire l'application qui implémente VoiceInteractionService, ou une activité gérant l' ACTION_ASSIST sur appui long sur KEYCODE_MEDIA_PLAY_PAUSE ou KEYCODE_HEADSETHOOK si l'activité de premier plan ne le fait pas. gérer ces événements à pression longue.
  • [ 7.3 .1/H-SR] Sont FORTEMENT RECOMMANDÉS d'inclure un accéléromètre à 3 axes.

Si les implémentations d'appareils portables incluent un accéléromètre à 3 axes, elles :

  • [ 7.3 .1/H-1-1] DOIT être capable de signaler des événements jusqu'à une fréquence d'au moins 100 Hz.

Si les implémentations d'appareils portables incluent un gyroscope, elles :

  • [ 7.3 .4/H-1-1] DOIT être capable de signaler des événements jusqu'à une fréquence d'au moins 100 Hz.

Implémentations d'appareils portables pouvant passer un appel vocal et indiquer toute valeur autre que PHONE_TYPE_NONE dans getPhoneType :

  • [ 7.3 .8/H] DEVRAIT inclure un capteur de proximité.

Implémentations d'appareils portables :

  • [ 7.3 .12/H-SR] Sont RECOMMANDÉS pour prendre en charge le capteur de pose avec 6 degrés de liberté.
  • [ 7.4 .3/H] DEVRAIT inclure la prise en charge de Bluetooth et Bluetooth LE.

Si les implémentations d’appareils portables incluent une connexion limitée, elles :

  • [ 7.4 .7/H-1-1] DOIT fournir le mode d'économie de données.

Implémentations d'appareils portables :

  • [ 7.6 .1/H-0-1] DOIT disposer d'au moins 4 Go de stockage non volatile disponible pour les données privées de l'application (alias partition "/data").
  • [ 7.6 .1/H-0-2] DOIT renvoyer « true » pour ActivityManager.isLowRamDevice() lorsqu'il y a moins de 1 Go de mémoire disponible pour le noyau et l'espace utilisateur.

Si les implémentations d'appareils portables déclarent la prise en charge d'un ABI 32 bits uniquement :

  • [ 7.6 .1/H-1-1] La mémoire disponible pour le noyau et l'espace utilisateur DOIT être d'au moins 416 Mo si l'affichage par défaut utilise des résolutions de framebuffer jusqu'à qHD (par exemple FWVGA).

  • [ 7.6 .1/H-2-1] La mémoire disponible pour le noyau et l'espace utilisateur DOIT être d'au moins 592 Mo si l'affichage par défaut utilise des résolutions de framebuffer jusqu'à HD+ (par exemple HD, WSVGA).

  • [ 7.6 .1/H-3-1] La mémoire disponible pour le noyau et l'espace utilisateur DOIT être d'au moins 896 Mo si l'affichage par défaut utilise des résolutions de framebuffer jusqu'à FHD (par exemple WSXGA+).

  • [ 7.6 .1/H-4-1] La mémoire disponible pour le noyau et l'espace utilisateur DOIT être d'au moins 1 344 Mo si l'affichage par défaut utilise des résolutions de framebuffer jusqu'à QHD (par exemple QWXGA).

Si les implémentations d'appareils portables déclarent la prise en charge de n'importe quel ABI 64 bits (avec ou sans ABI 32 bits) :

  • [ 7.6 .1/H-5-1] La mémoire disponible pour le noyau et l'espace utilisateur DOIT être d'au moins 816 Mo si l'affichage par défaut utilise des résolutions de framebuffer jusqu'à qHD (par exemple FWVGA).

  • [ 7.6 .1/H-6-1] La mémoire disponible pour le noyau et l'espace utilisateur DOIT être d'au moins 944 Mo si l'affichage par défaut utilise des résolutions de framebuffer jusqu'à HD+ (par exemple HD, WSVGA).

  • [ 7.6 .1/H-7-1] La mémoire disponible pour le noyau et l'espace utilisateur DOIT être d'au moins 1 280 Mo si l'affichage par défaut utilise des résolutions de framebuffer jusqu'à FHD (par exemple WSXGA+).

  • [ 7.6 .1/H-8-1] La mémoire disponible pour le noyau et l'espace utilisateur DOIT être d'au moins 1 824 Mo si l'affichage par défaut utilise des résolutions de framebuffer jusqu'à QHD (par exemple QWXGA).

Notez que la « mémoire disponible pour le noyau et l'espace utilisateur » ci-dessus fait référence à l'espace mémoire fourni en plus de toute mémoire déjà dédiée aux composants matériels tels que la radio, la vidéo, etc. qui ne sont pas sous le contrôle du noyau sur les implémentations de périphériques.

Si les implémentations de périphériques portables incluent moins ou égal à 1 Go de mémoire disponible pour le noyau et l'espace utilisateur, elles :

  • [ 7.6 .1/H-9-1] DOIT déclarer l'indicateur de fonctionnalité android.hardware.ram.low .
  • [ 7.6 .1/H-9-2] DOIT disposer d'au moins 1,1 Go de stockage non volatile pour les données privées de l'application (alias partition "/data").

Si les implémentations de périphériques portables incluent plus de 1 Go de mémoire disponible pour le noyau et l'espace utilisateur, elles :

  • [ 7.6 .1/H-10-1] DOIT disposer d'au moins 4 Go de stockage non volatile disponible pour les données privées de l'application (alias partition "/data").
  • DEVRAIT déclarer l'indicateur de fonctionnalité android.hardware.ram.normal .

Implémentations d'appareils portables :

  • [ 7.6 .2/H-0-1] NE DOIT PAS fournir un stockage partagé d'application inférieur à 1 Gio.
  • [ 7.7 .1/H] DEVRAIT inclure un port USB prenant en charge le mode périphérique.

Si les implémentations d'appareils portables incluent un port USB prenant en charge le mode périphérique, elles :

  • [ 7.7 .1/H-1-1] DOIT implémenter l'API Android Open Accessories (AOA).

Implémentations d'appareils portables :

  • [ 7.8 .1/H-0-1] DOIT inclure un microphone.
  • [ 7.8 .2/H-0-1] DOIT avoir une sortie audio et déclarer android.hardware.audio.output .

Si les implémentations d'appareils portables sont capables de répondre à toutes les exigences de performances pour la prise en charge du mode VR et incluent sa prise en charge, elles :

  • [ 7.9 .1/H-1-1] DOIT déclarer l'indicateur de fonctionnalité android.hardware.vr.high_performance .
  • [ 7.9 .1/H-1-2] DOIT inclure une application implémentant android.service.vr.VrListenerService qui peut être activée par les applications VR via android.app.Activity#setVrModeEnabled .

2.2.2. Multimédia

Les implémentations d'appareils portables DOIVENT prendre en charge le codage audio suivant :

  • [ 5.1 .1/H-0-1] RAM-NB
  • [ 5.1 .1/H-0-2] AMR-WB
  • [ 5.1 .1/H-0-3] Profil MPEG-4 AAC (AAC LC)
  • [ 5.1 .1/H-0-4] Profil MPEG-4 HE AAC (AAC+)
  • [ 5.1 .1/H-0-5] AAC ELD (AAC à faible délai amélioré)

Les implémentations d'appareils portables DOIVENT prendre en charge le décodage audio suivant :

  • [ 5.1 .2/H-0-1] RAM-NB
  • [ 5.1 .2/H-0-2] AMR-WB

Les implémentations d'appareils portables DOIVENT prendre en charge le codage vidéo suivant et le mettre à la disposition des applications tierces :

  • [ 5.2 /H-0-1] H.264AVC
  • [ 5.2 /H-0-2] VP8

Les implémentations d'appareils portables DOIVENT prendre en charge le décodage vidéo suivant :

  • [ 5.3 /H-0-1] H.264AVC
  • [ 5.3 /H-0-2] H.265HEVC
  • [ 5.3 /H-0-3] MPEG-4SP
  • [ 5.3 /H-0-4] VP8
  • [ 5.3 /H-0-5] VP9

2.2.3. Logiciel

Implémentations d'appareils portables :

  • [ 3.2.3.1 /H-0-1] DOIT avoir une application qui gère les intentions ACTION_GET_CONTENT , ACTION_OPEN_DOCUMENT , ACTION_OPEN_DOCUMENT_TREE et ACTION_CREATE_DOCUMENT comme décrit dans les documents du SDK, et fournir à l'utilisateur la possibilité d'accéder aux données du fournisseur de documents à l'aide de l'API DocumentsProvider .
  • [ 3.4 .1/H-0-1] DOIT fournir une implémentation complète de l'API android.webkit.Webview .
  • [ 3.4 .2/H-0-1] DOIT inclure une application de navigateur autonome pour la navigation Web des utilisateurs généraux.
  • [ 3.8 .1/H-SR] Sont FORTEMENT RECOMMANDÉS d'implémenter un lanceur par défaut qui prend en charge l'épinglage dans l'application des raccourcis, des widgets et des widgetFeatures .
  • [ 3.8 .1/H-SR] Sont FORTEMENT RECOMMANDÉS d'implémenter un lanceur par défaut qui fournit un accès rapide aux raccourcis supplémentaires fournis par les applications tierces via l'API ShortcutManager .
  • [ 3.8 .1/H-SR] Sont FORTEMENT RECOMMANDÉS d'inclure une application de lancement par défaut qui affiche des badges pour les icônes d'application.
  • [ 3.8 .2/H-SR] Sont FORTEMENT RECOMMANDÉS pour prendre en charge les widgets d'applications tierces.
  • [ 3.8 .3/H-0-1] DOIT permettre aux applications tierces d'informer les utilisateurs des événements notables via les classes API Notification et NotificationManager .
  • [ 3.8 .3/H-0-2] DOIT prendre en charge les notifications enrichies.
  • [ 3.8 .3/H-0-3] DOIT prendre en charge les notifications tête haute.
  • [ 3.8 .3/H-0-4] DOIT inclure une nuance de notification, offrant à l'utilisateur la possibilité de contrôler directement (par exemple, répondre, répéter, rejeter, bloquer) les notifications via les moyens de l'utilisateur tels que les boutons d'action ou le panneau de commande tel qu'implémenté. dans l'AOSP.
  • [ 3.8 .3/H-0-5] DOIT afficher les choix fournis via RemoteInput.Builder setChoices() dans l'ombre de notification.
  • [ 3.8 .3/H-SR] Sont FORTEMENT RECOMMANDÉS d'afficher le premier choix fourni via RemoteInput.Builder setChoices() dans l'ombre de notification sans interaction supplémentaire de l'utilisateur.
  • [ 3.8 .3/H-SR] Sont FORTEMENT RECOMMANDÉS d'afficher tous les choix fournis via RemoteInput.Builder setChoices() dans l'ombre de notification lorsque l'utilisateur développe toutes les notifications dans l'ombre de notification.
  • [ 3.8 .4/H-SR] Sont FORTEMENT RECOMMANDÉS d'implémenter un assistant sur l'appareil pour gérer l' action d'assistance .

Si les implémentations d’appareils portables prennent en charge l’action Assist, elles :

  • [ 3.8 .4/H-SR] Il est FORTEMENT RECOMMANDÉ d'utiliser un appui long sur la touche HOME comme interaction désignée pour lancer l'application d'assistance comme décrit dans la section 7.2.3 . DOIT lancer l'application d'assistance sélectionnée par l'utilisateur, en d'autres termes l'application qui implémente VoiceInteractionService , ou une activité gérant l'intention ACTION_ASSIST .

Si les implémentations d'appareils portables Android prennent en charge un écran de verrouillage, elles :

  • [ 3.8 .10/H-1-1] DOIT afficher les notifications de l'écran de verrouillage, y compris le modèle de notification multimédia.

Si les implémentations d’appareils portables prennent en charge un écran de verrouillage sécurisé, elles :

  • [ 3.9 /H-1-1] DOIT mettre en œuvre la gamme complète des politiques d'administration des appareils définies dans la documentation du SDK Android.
  • [ 3.9 /H-1-2] DOIT déclarer la prise en charge des profils gérés via l'indicateur de fonctionnalité android.software.managed_users , sauf lorsque le périphérique est configuré de manière à se signaler comme un périphérique à faible RAM ou à allouer des ressources internes ( stockage non amovible) en tant que stockage partagé.

Implémentations d'appareils portables :

  • [ 3.10 /H-0-1] DOIT prendre en charge les services d'accessibilité tiers.
  • [ 3.10 /H-SR] Sont FORTEMENT RECOMMANDÉS de précharger sur l'appareil des services d'accessibilité comparables ou dépassant les fonctionnalités des services d'accessibilité Switch Access et TalkBack (pour les langues prises en charge par le moteur de synthèse vocale préinstallé), tels que fournis dans l' ouverture de talkback . projet source .
  • [ 3.11 /H-0-1] DOIT prendre en charge l'installation de moteurs TTS tiers.
  • [ 3.11 /H-SR] Sont FORTEMENT RECOMMANDÉS d'inclure un moteur TTS prenant en charge les langues disponibles sur l'appareil.
  • [ 3.13 /H-SR] Sont FORTEMENT RECOMMANDÉS d'inclure un composant d'interface utilisateur de paramètres rapides.

Si les implémentations d'appareils portables Android déclarent la prise en charge FEATURE_BLUETOOTH ou FEATURE_WIFI , elles :

  • [ 3.16 /H-1-1] DOIT prendre en charge la fonction de couplage d'appareil compagnon.

2.2.4. Performances et puissance

  • [ 8.1 /H-0-1] Latence de trame cohérente . Une latence de trame incohérente ou un délai de rendu des images NE DOIT PAS se produire plus de 5 images par seconde, et DEVRAIT être inférieur à 1 image par seconde.
  • [ 8.1 /H-0-2] Latence de l'interface utilisateur . Les implémentations d'appareil DOIVENT garantir une expérience utilisateur à faible latence en faisant défiler une liste de 10 000 entrées de liste telle que définie par la suite de tests de compatibilité Android (CTS) en moins de 36 secondes.
  • [ 8.1 /H-0-3] Changement de tâche . Lorsque plusieurs applications ont été lancées, la relance d'une application déjà en cours d'exécution après son lancement DOIT prendre moins d'une seconde.

Implémentations d'appareils portables :

  • [ 8.2 /H-0-1] DOIT garantir des performances d'écriture séquentielle d'au moins 5 Mo/s.
  • [ 8.2 /H-0-2] DOIT garantir des performances d'écriture aléatoire d'au moins 0,5 Mo/s.
  • [ 8.2 /H-0-3] DOIT assurer une performance de lecture séquentielle d'au moins 15 Mo/s.
  • [ 8.2 /H-0-4] DOIT garantir des performances de lecture aléatoire d'au moins 3,5 Mo/s.

Si les implémentations d'appareils portables incluent des fonctionnalités permettant d'améliorer la gestion de l'alimentation des appareils incluses dans AOSP ou d'étendre les fonctionnalités incluses dans AOSP, elles :

  • [ 8.3 /H-1-1] DOIT fournir à l'utilisateur les moyens d'activer et de désactiver la fonction d'économie de batterie.
  • [ 8.3 /H-1-2] DOIT offrir à l'utilisateur la possibilité d'afficher toutes les applications exemptées des modes d'économie d'énergie App Standby et Doze.

Implémentations d'appareils portables :

  • [ 8.4 /H-0-1] DOIT fournir un profil d'alimentation par composant qui définit la valeur de consommation actuelle pour chaque composant matériel et l'épuisement approximatif de la batterie provoqué par les composants au fil du temps, comme documenté sur le site du projet Android Open Source.
  • [ 8.4 /H-0-2] DOIT déclarer toutes les valeurs de consommation d'énergie en milliampères-heures (mAh).
  • [ 8.4 /H-0-3] DOIT signaler la consommation d'énergie du processeur par UID de chaque processus. Le projet Android Open Source répond à ces exigences grâce à l'implémentation du module noyau uid_cputime .
  • [ 8.4 /H-0-4] DOIT rendre cette consommation d'énergie disponible via la commande shell adb shell dumpsys batterystats au développeur de l'application.
  • [ 8.4 /H] DEVRAIT être attribué au composant matériel lui-même s'il est impossible d'attribuer la consommation d'énergie du composant matériel à une application.

Si les implémentations d’appareils portables incluent un écran ou une sortie vidéo, elles :

2.2.5. Modèle de sécurité

Implémentations d'appareils portables :

Lorsque les implémentations d'appareils portables prennent en charge un écran de verrouillage sécurisé, elles :

  • [ 9.11 /H-1-1] DOIT permettre à l'utilisateur de choisir le délai d'attente de veille le plus court, c'est-à-dire un temps de transition de l'état déverrouillé à l'état verrouillé, de 15 secondes ou moins.
  • [ 9.11 /H-1-2] DOIT permettre à l'utilisateur de masquer les notifications et de désactiver toutes les formes d'authentification, à l'exception de l'authentification principale décrite dans 9.11.1 Écran de verrouillage sécurisé . L'AOSP répond aux exigences en tant que mode de verrouillage.

2.3. Exigences de télévision

Un appareil Android Television fait référence à une implémentation d'appareil Android qui est une interface de divertissement permettant de consommer des médias numériques, des films, des jeux, des applications et/ou la télévision en direct pour les utilisateurs assis à environ dix pieds de distance (un « utilisateur penché en arrière » ou un « utilisateur de 10 pieds »). interface").

Les implémentations d'appareils Android sont classées comme téléviseurs si elles répondent à tous les critères suivants :

  • Nous avons fourni un mécanisme pour contrôler à distance l'interface utilisateur rendue sur l'écran qui peut se trouver à dix pieds de l'utilisateur.
  • Avoir un écran intégré avec une diagonale supérieure à 24 pouces OU inclure un port de sortie vidéo, tel que VGA, HDMI, DisplayPort ou un port sans fil pour l'affichage.

Les exigences supplémentaires indiquées dans le reste de cette section sont spécifiques aux implémentations d'appareils Android Television.

2.3.1. Matériel

Implémentations d'appareils de télévision :

  • [ 7.2 .2/T-0-1] DOIT prendre en charge le D-pad .
  • [ 7.2 .3/T-0-1] DOIT fournir les fonctions Accueil et Retour.
  • [ 7.2 .3/T-0-2] DOIT envoyer à la fois l'événement d'appui normal et long de la fonction Retour ( KEYCODE_BACK ) à l'application de premier plan.
  • [ 7.2 .6.1/T-0-1] DOIT inclure la prise en charge des contrôleurs de jeu et déclarer l'indicateur de fonctionnalité android.hardware.gamepad .
  • [ 7.2 .7/T] DEVRAIT fournir une télécommande à partir de laquelle les utilisateurs peuvent accéder à la navigation non tactile et aux entrées des touches de navigation principales .

Si les implémentations d'appareils de télévision incluent un gyroscope, elles :

  • [ 7.3 .4/T-1-1] DOIT être capable de signaler des événements jusqu'à une fréquence d'au moins 100 Hz.

Implémentations d'appareils de télévision :

  • [ 7.4 .3/T-0-1] DOIT prendre en charge Bluetooth et Bluetooth LE.
  • [ 7.6 .1/T-0-1] DOIT disposer d'au moins 4 Go de stockage non volatile disponible pour les données privées de l'application (alias partition "/data").

Si les implémentations d'appareils de télévision incluent un port USB prenant en charge le mode hôte, elles :

  • [ 7.5 .3/T-1-1] DOIT inclure la prise en charge d'une caméra externe qui se connecte via ce port USB mais qui n'est pas nécessairement toujours connectée.

Si les implémentations des appareils TV sont en 32 bits :

  • [ 7.6 .1/T-1-1] La mémoire disponible pour le noyau et l'espace utilisateur DOIT être d'au moins 896 Mo si l'une des densités suivantes est utilisée :

    • 400 dpi ou plus sur les écrans petits/normaux
    • xhdpi ou supérieur sur les grands écrans
    • tvdpi ou supérieur sur les écrans extra-larges

Si les implémentations des appareils TV sont en 64 bits :

  • [ 7.6 .1/T-2-1] La mémoire disponible pour le noyau et l'espace utilisateur DOIT être d'au moins 1 280 Mo si l'une des densités suivantes est utilisée :

    • 400 dpi ou plus sur les écrans petits/normaux
    • xhdpi ou supérieur sur les grands écrans
    • tvdpi ou supérieur sur les écrans extra-larges

Notez que la « mémoire disponible pour le noyau et l'espace utilisateur » ci-dessus fait référence à l'espace mémoire fourni en plus de toute mémoire déjà dédiée aux composants matériels tels que la radio, la vidéo, etc. qui ne sont pas sous le contrôle du noyau sur les implémentations de périphériques.

Implémentations d'appareils de télévision :

  • [ 7.8 .1/T] DEVRAIT inclure un microphone.
  • [ 7.8 .2/T-0-1] DOIT avoir une sortie audio et déclarer android.hardware.audio.output .

2.3.2. Multimédia

Les implémentations d'appareils de télévision DOIVENT prendre en charge les formats de codage audio suivants :

  • [ 5.1 /T-0-1] Profil MPEG-4 AAC (AAC LC)
  • [ 5.1 /T-0-2] Profil MPEG-4 HE AAC (AAC+)
  • [ 5.1 /T-0-3] AAC ELD (AAC à faible délai amélioré)

Les implémentations d'appareils de télévision DOIVENT prendre en charge les formats de codage vidéo suivants :

  • [ 5.2 /T-0-1] H.264
  • [ 5.2 /T-0-2] VP8

Implémentations d'appareils de télévision :

  • [ 5.2 .2/T-SR] Sont FORTEMENT RECOMMANDÉS pour prendre en charge l'encodage H.264 des vidéos de résolution 720p et 1080p à 30 images par seconde.

Les mises en œuvre d'appareils de télévision DOIVENT prendre en charge les formats de décodage vidéo suivants :

Il est FORTEMENT RECOMMANDÉ que les implémentations d'appareils de télévision prennent en charge les formats de décodage vidéo suivants :

Les mises en œuvre d'appareils de télévision DOIVENT prendre en charge le décodage H.264, comme détaillé dans la section 5.3.4, à des fréquences d'images vidéo standard et à des résolutions allant jusqu'à et incluant :

  • [ 5.3.4 .4/T-1-1] HD 1080p à 60 images par seconde avec profil Basline
  • [ 5.3.4 .4/T-1-2] HD 1080p à 60 images par seconde avec profil principal
  • [ 5.3.4 .4/T-1-3] HD 1080p à 60 images par seconde avec High Profile Level 4.2

Les implémentations d'appareils de télévision avec des décodeurs matériels H.265 DOIVENT prendre en charge le décodage H.265, comme détaillé dans la section 5.3.5, à des fréquences d'images vidéo standard et à des résolutions allant jusqu'à et incluant :

  • [ 5.3.5 .4/T-1-1] HD 1080p à 60 images par seconde avec Main Profile Level 4.1

Si les implémentations d'appareils de télévision avec décodeurs matériels H.265 prennent en charge le décodage H.265 et le profil de décodage UHD, elles :

  • [ 5.3.5 .5/T-2-1] DOIT prendre en charge le profil de décodage UHD à 60 images par seconde avec le profil Main10 Niveau 5 Main Tier.

Les mises en œuvre d'appareils de télévision DOIVENT prendre en charge le décodage VP8, comme détaillé à la section 5.3.6, à des fréquences d'images vidéo standard et à des résolutions allant jusqu'à et incluant :

  • [ 5.3.6 .4/T-1-1] Profil de décodage HD 1080p à 60 images par seconde

Les implémentations d'appareils de télévision avec des décodeurs matériels VP9 DOIVENT prendre en charge le décodage VP9, ​​comme détaillé à la section 5.3.7, à des fréquences d'images vidéo standard et à des résolutions allant jusqu'à et incluant :

  • [ 5.3.7 .4/T-1-1] HD 1080p à 60 images par seconde avec profil 0 (profondeur de couleur 8 bits)

Si les implémentations d'appareils de télévision avec décodeurs matériels VP9 prennent en charge le décodage VP9 et le profil de décodage UHD, elles :

  • [ 5.3.7 .5/T-2-1] DOIT prendre en charge le profil de décodage UHD à 60 images par seconde avec le profil 0 (profondeur de couleur de 8 bits).
  • [ 5.3.7 .5/T-2-1] Sont FORTEMENT RECOMMANDÉS pour prendre en charge le profil de décodage UHD à 60 images par seconde avec le profil 2 (profondeur de couleur 10 bits).

Implémentations d'appareils de télévision :

  • [ 5.5 .3/T-0-1] DOIT inclure la prise en charge du volume principal du système et de l'atténuation du volume de sortie audio numérique sur les sorties prises en charge, à l'exception de la sortie passthrough audio compressée (où aucun décodage audio n'est effectué sur l'appareil).
  • [ 5.8 /T-0-1] DOIT définir le mode de sortie HDMI pour sélectionner la résolution maximale pouvant être prise en charge avec un taux de rafraîchissement de 50 Hz ou 60 Hz pour tous les écrans filaires.
  • [ 5.8 /T-SR] Sont FORTEMENT RECOMMANDÉS de fournir un sélecteur de taux de rafraîchissement HDMI configurable par l'utilisateur pour tous les écrans filaires.
  • [ 5.8 /T-SR] Sont FORTEMENT RECOMMANDÉS pour prendre en charge le décodage simultané de flux sécurisés. Au minimum, le décodage simultané de deux steams est FORTEMENT RECOMMANDÉ.
  • [ 5.8 ] DEVRAIT régler le taux de rafraîchissement du mode de sortie HDMI sur 50 Hz ou 60 Hz, en fonction du taux de rafraîchissement vidéo de la région dans laquelle l'appareil est vendu pour tous les écrans filaires.

Si les implémentations d'appareils de télévision prennent en charge le décodage UHD et prennent en charge les écrans externes, elles :

  • [ 5.8 /T-1-1] DOIT prendre en charge HDCP 2.2.

Si les implémentations d'appareils de télévision ne prennent pas en charge le décodage UHD mais prennent en charge les écrans externes, elles :

  • [ 5.8 /T-2-1] DOIT prendre en charge HDCP 1.4

2.3.3. Logiciel

Implémentations d'appareils de télévision :

  • [ 3 /T-0-1] DOIT déclarer les fonctionnalités android.software.leanback et android.hardware.type.television .
  • [ 3.4 .1/T-0-1] DOIT fournir une implémentation complète de l'API android.webkit.Webview .

Si les implémentations d'appareils Android Television prennent en charge un écran de verrouillage, elles :

  • [ 3.8 .10/T-1-1] DOIT afficher les notifications de l'écran de verrouillage, y compris le modèle de notification multimédia.

Implémentations d'appareils de télévision :

  • [ 3.8 .14/T-SR] Sont FORTEMENT RECOMMANDÉS pour prendre en charge le mode multi-fenêtre image dans l'image (PIP).
  • [ 3.10 /T-0-1] DOIT prendre en charge les services d'accessibilité tiers.
  • [ 3.10 /T-SR] Sont FORTEMENT RECOMMANDÉS de précharger sur l'appareil des services d'accessibilité comparables ou dépassant les fonctionnalités des services d'accessibilité Switch Access et TalkBack (pour les langues prises en charge par le moteur de synthèse vocale préinstallé), tels que fournis dans l' ouverture de talkback . projet source .

Si les implémentations d'appareils de télévision signalent la fonctionnalité android.hardware.audio.output , elles :

  • [ 3.11 /T-SR] Sont FORTEMENT RECOMMANDÉS d'inclure un moteur TTS prenant en charge les langues disponibles sur l'appareil.
  • [ 3.11 /T-1-1] DOIT prendre en charge l'installation de moteurs TTS tiers.

Implémentations d'appareils de télévision :

  • [ 3.12 /T-0-1] DOIT prendre en charge le cadre d'entrée TV.

2.3.4. Performances et puissance

  • [ 8.1 /T-0-1] Latence de trame cohérente . Une latence de trame incohérente ou un délai de rendu des images NE DOIT PAS se produire plus de 5 images par seconde, et DEVRAIT être inférieur à 1 image par seconde.
  • [ 8.2 /T-0-1] DOIT garantir des performances d'écriture séquentielle d'au moins 5 Mo/s.
  • [ 8.2 /T-0-2] DOIT garantir des performances d'écriture aléatoire d'au moins 0,5 Mo/s.
  • [ 8.2 /T-0-3] DOIT garantir des performances de lecture séquentielle d'au moins 15 Mo/s.
  • [ 8.2 /T-0-4] DOIT garantir des performances de lecture aléatoire d'au moins 3,5 Mo/s.

Si les implémentations d'appareils de télévision incluent des fonctionnalités permettant d'améliorer la gestion de l'alimentation des appareils incluses dans AOSP ou d'étendre les fonctionnalités incluses dans AOSP, elles :

  • [ 8.3 /T-1-1] DOIT fournir à l'utilisateur les moyens d'activer et de désactiver la fonction d'économie de batterie.
  • [ 8.3 /T-1-2] DOIT offrir à l'utilisateur la possibilité d'afficher toutes les applications exemptées des modes d'économie d'énergie App Standby et Doze.

Implémentations d'appareils de télévision :

  • [ 8.4 /T-0-1] DOIT fournir un profil d'alimentation par composant qui définit la valeur de consommation actuelle pour chaque composant matériel et l'épuisement approximatif de la batterie provoqué par les composants au fil du temps, comme documenté sur le site du projet Android Open Source.
  • [ 8.4 /T-0-2] DOIT déclarer toutes les valeurs de consommation d'énergie en milliampères-heures (mAh).
  • [ 8.4 /T-0-3] DOIT signaler la consommation d'énergie du processeur par UID de chaque processus. Le projet Android Open Source répond à ces exigences grâce à l'implémentation du module noyau uid_cputime .
  • [ 8.4 /T] DEVRAIT être attribué au composant matériel lui-même s'il est impossible d'attribuer la consommation d'énergie du composant matériel à une application.
  • [ 8.4 /T-0-4] DOIT rendre cette consommation d'énergie disponible via la commande shell adb shell dumpsys batterystats au développeur de l'application.

2.4. Exigences de surveillance

Un appareil Android Watch fait référence à une implémentation d'appareil Android destinée à être portée sur le corps, peut-être au poignet.

Les implémentations d'appareils Android sont classées comme Watch si elles répondent à tous les critères suivants :

  • Avoir un écran dont la diagonale physique est comprise entre 1,1 et 2,5 pouces.
  • Avoir un mécanisme prévu pour être porté sur le corps.

Les exigences supplémentaires indiquées dans le reste de cette section sont spécifiques aux implémentations d'appareils Android Watch.

2.4.1. Matériel

Regardez les implémentations des appareils :

  • [ 7.1 .1.1/W-0-1] DOIT avoir un écran dont la diagonale physique est comprise entre 1,1 et 2,5 pouces.

  • [ 7.2 .3/W-0-1] DOIT avoir la fonction Home disponible pour l'utilisateur et la fonction Back sauf lorsqu'elle est dans UI_MODE_TYPE_WATCH .

  • [ 7.2 .4/W-0-1] DOIT prendre en charge la saisie sur écran tactile.

  • [ 7.3 .1/W-SR] Sont FORTEMENT RECOMMANDÉS d'inclure un accéléromètre à 3 axes.

  • [ 7.4 .3/W-0-1] DOIT prendre en charge Bluetooth.

  • [ 7.6 .1/W-0-1] DOIT disposer d'au moins 1 Go de stockage non volatile disponible pour les données privées de l'application (alias partition "/data").

  • [ 7.6 .1/W-0-2] DOIT avoir au moins 416 Mo de mémoire disponible pour le noyau et l'espace utilisateur.

  • [ 7.8 .1/W-0-1] DOIT inclure un microphone.

  • [ 7.8 .2/W] PEUT mais NE DEVRAIT PAS avoir de sortie audio.

2.4.2. Multimédia

Aucune exigence supplémentaire.

2.4.3. Logiciel

Regardez les implémentations des appareils :

  • [ 3 /W-0-1] DOIT déclarer la fonctionnalité android.hardware.type.watch .
  • [ 3 /W-0-2] DOIT prendre en charge uiMode = UI_MODE_TYPE_WATCH .

Regardez les implémentations des appareils :

  • [ 3.8 .4/W-SR] Sont FORTEMENT RECOMMANDÉS d'implémenter un assistant sur l'appareil pour gérer l' action d'assistance .

Regardez les implémentations de périphériques qui déclarent l'indicateur de fonctionnalité android.hardware.audio.output :

  • [ 3.10 /W-1-1] DOIT prendre en charge les services d'accessibilité tiers.
  • [ 3.10 /W-SR] Sont FORTEMENT RECOMMANDÉS de précharger sur l'appareil des services d'accessibilité comparables ou dépassant les fonctionnalités des services d'accessibilité Switch Access et TalkBack (pour les langues prises en charge par le moteur de synthèse vocale préinstallé), tels que fournis dans l' ouverture de talkback . projet source .

Si les implémentations d’appareils Watch signalent la fonctionnalité android.hardware.audio.output, elles :

  • [ 3.11 /W-SR] Sont FORTEMENT RECOMMANDÉS d'inclure un moteur TTS prenant en charge les langues disponibles sur l'appareil.

  • [ 3.11 /W-0-1] DOIT prendre en charge l'installation de moteurs TTS tiers.

2.4.4. Performances et puissance

Si les implémentations d’appareils Watch incluent des fonctionnalités permettant d’améliorer la gestion de l’alimentation des appareils incluses dans AOSP ou d’étendre les fonctionnalités incluses dans AOSP, elles :

  • [ 8.3 /W-SR] Sont FORTEMENT RECOMMANDÉS pour permettre à l'utilisateur d'afficher toutes les applications exemptées des modes d'économie d'énergie App Standby et Doze.
  • [ 8.3 / W-SR] sont fortement recommandés pour fournir aux utilisateurs l'offre pour activer et désactiver la fonction d'économie de batterie.

Regarder les implémentations de l'appareil:

  • [ 8.4 / W-0-1] Doit fournir un profil d'alimentation par composant qui définit la valeur de consommation actuelle pour chaque composant matériel et la décharge de batterie approximative provoquée par les composants au fil du temps, comme indiqué sur le site du projet Open Source Android.
  • [ 8.4 / W-0-2] Doit signaler toutes les valeurs de consommation d'énergie en milliampères d'heures (MAH).
  • [ 8.4 / W-0-3] Doit signaler la consommation d'énergie du CPU par UID de chaque processus. Le projet Open Source Android répond aux exigences via l'implémentation du module du noyau uid_cputime .
  • [ 8.4 / W-0-4] Doit rendre cette utilisation d'alimentation disponible via la commande adb shell dumpsys batterystats Shellysys au développeur de l'application.
  • [ 8.4 / w] doit être attribué au composant matériel lui-même s'il est incapable d'attribuer l'utilisation d'alimentation du composant matériel à une application.

2.5. Exigences automobiles

L'implémentation Android Automotive fait référence à une unité de tête de véhicule exécutant Android en tant que système d'exploitation pour une partie ou la totalité des fonctionnalités du système et / ou d'infodivertissement.

Les implémentations de périphériques Android sont classées comme automobile s'ils déclarent la fonctionnalité android.hardware.type.automotive ou remplissez tous les critères suivants.

  • Sont intégrés dans le cadre d'un véhicule automobile ou enfichable.
  • Utilisent un écran dans la rangée des sièges du conducteur comme écran principal.

Les exigences supplémentaires dans le reste de cette section sont spécifiques aux implémentations de périphériques automobiles Android.

2.5.1. Matériel

Implémentations des périphériques automobiles:

  • [ 7.1 .1.1 / A-0-1] Doit avoir un écran d'au moins 6 pouces de taille diagonale physique.
  • [ 7.1 .1.1 / A-0-2] Doit avoir une disposition de taille d'écran d'au moins 750 dp x 480 dp.

  • [ 7.2 .3 / A-0-1] doivent fournir la fonction domestique et peuvent fournir des fonctions de dos et récentes.

  • [ 7.2 .3 / A-0-2] doit envoyer à la fois l'événement normal et long de la fonction de la fonction arrière ( KEYCODE_BACK ) à l'application de premier plan.

  • [ 7.3 .1 / a-sr] sont fortement recommandés pour inclure un accéléromètre à 3 axes.

Si les implémentations des périphériques automobiles incluent un accéléromètre à 3 axes, ils:

Si les implémentations des périphériques automobiles incluent un gyroscope, ils:

  • [ 7.3 .4 / A-1-1] doivent être en mesure de signaler des événements jusqu'à une fréquence d'au moins 100 Hz.

Implémentations des périphériques automobiles:

  • [ 7.3 .11 / A-0-1] Doit fournir un équipement de courant sous le nom de SENSOR_TYPE_GEAR .

Implémentations des périphériques automobiles:

  • [ 7.3 .11.2 / a-0-1] Doit prendre en charge le mode jour / nuit défini comme SENSOR_TYPE_NIGHT .
  • [ 7.3 .11.2 / A-0-2] La valeur de l'indicateur SENSOR_TYPE_NIGHT doit être cohérente avec le mode de tableau de bord jour / nuit et doit être basé sur l'entrée du capteur de lumière ambiante.
  • Le capteur de lumière ambiante sous-jacent peut être le même que le photomètre .

  • [ 7.3 .11.4 / A-0-1] Doit fournir une vitesse de véhicule telle que définie par SENSOR_TYPE_CAR_SPEED .

  • [ 7.3 .11.5 / A-0-1] Doit fournir l'état de frein de stationnement tel que défini par SENSOR_TYPE_PARKING_BRAKE .

  • [ 7.4 .3 / A-0-1] doit prendre en charge Bluetooth et doit prendre en charge Bluetooth LE.

  • [ 7.4 .3 / A-0-2] Les implémentations automobiles Android doivent prendre en charge les profils Bluetooth suivants:
    • Appel téléphonique sur un profil mains libres (HFP).
    • Lecture multimédia via le profil de distribution audio (A2DP).
    • Contrôle de la lecture multimédia via le profil de contrôle à distance (AVRCP).
    • Partage de contacts à l'aide du profil d'accès au répertoire téléphonique (PBAP).
  • [ 7.4 .3 / a-sr] sont fortement recommandés pour prendre en charge le profil d'accès aux messages (MAP).

  • [ 7.4 .5 / A] devrait inclure le support pour la connectivité des données basée sur le réseau cellulaire.

  • [ 7.4 .5 / a] peut utiliser la constante NetworkCapabilities#NET_CAPABILITY_OEM_PAID pour les réseaux qui devraient être disponibles pour les applications système.

  • [ 7.6 .1 / A-0-1] Doit avoir au moins 4 Go de stockage non volatile disponible pour les données privées d'application (aka "/ data" partition).

Implémentations des périphériques automobiles:

  • [ 7.6 .1 / a] devrait formater la partition de données pour offrir des performances et une longévité améliorées sur le stockage Flash, par exemple en utilisant le système de fichiers f2fs .

Si les implémentations des périphériques automobiles fournissent un stockage externe partagé via une partie du stockage interne non amovible, ils:

  • [ 7.6 .1 / a-sr] sont fortement recommandés pour réduire les frais généraux d'E / S sur les opérations effectuées sur le stockage externe, par exemple en utilisant SDCardFS .

Si les implémentations des périphériques automobiles sont 32 bits:

  • [ 7.6 .1 / A-1-1] La mémoire disponible pour le noyau et l'espace utilisateur doit être d'au moins 512 Mo si l'une des densités suivantes est utilisée:

    • 280 dpi ou plus bas sur les écrans petits / normaux
    • LDPI ou plus bas sur des écrans supplémentaires
    • MDPI ou plus bas sur de grands écrans
  • [ 7.6 .1 / A-1-2] La mémoire disponible pour le noyau et l'espace utilisateur doit être d'au moins 608 Mo si l'une des densités suivantes est utilisée:

    • XHDPI ou plus sur des écrans petits / normaux
    • HDPI ou plus sur de grands écrans
    • MDPI ou plus sur des écrans supplémentaires
  • [ 7.6 .1 / A-1-3] La mémoire disponible pour le noyau et l'espace utilisateur doit être d'au moins 896 Mo si l'une des densités suivantes est utilisée:

    • 400 dpi ou plus sur des écrans petits / normaux
    • XHDPI ou plus sur de grands écrans
    • tvdpi ou plus sur des écrans extra-grands
  • [ 7.6 .1 / A-1-4] La mémoire disponible pour le noyau et l'espace utilisateur doit être d'au moins 1344 Mo si l'une des densités suivantes est utilisée:

    • 560 dpi ou plus sur des écrans petits / normaux
    • 400 dpi ou plus sur de grands écrans
    • XHDPI ou plus sur des écrans supplémentaires

Si les implémentations des périphériques automobiles sont 64 bits:

  • [ 7.6 .1 / A-2-1] La mémoire disponible pour le noyau et l'espace utilisateur doit être d'au moins 816 Mo si l'une des densités suivantes est utilisée:

    • 280 dpi ou plus bas sur les écrans petits / normaux
    • LDPI ou plus bas sur des écrans supplémentaires
    • MDPI ou plus bas sur de grands écrans
  • [ 7.6 .1 / A-2-2] La mémoire disponible pour le noyau et l'espace utilisateur doit être d'au moins 944 Mo si l'une des densités suivantes est utilisée:

    • XHDPI ou plus sur des écrans petits / normaux
    • HDPI ou plus sur de grands écrans
    • MDPI ou plus sur des écrans supplémentaires
  • [ 7.6 .1 / A-2-3] La mémoire disponible pour le noyau et l'espace utilisateur doit être d'au moins 1280 Mo si l'une des densités suivantes est utilisée:

    • 400 dpi ou plus sur des écrans petits / normaux
    • XHDPI ou plus sur de grands écrans
    • tvdpi ou plus sur des écrans extra-grands
  • [ 7.6 .1 / A-2-4] La mémoire disponible pour le noyau et l'espace utilisateur doit être d'au moins 1824 Mo si l'une des densités suivantes est utilisée:

    • 560 dpi ou plus sur des écrans petits / normaux
    • 400 dpi ou plus sur de grands écrans
    • XHDPI ou plus sur des écrans supplémentaires

Notez que la "mémoire disponible pour le noyau et l'espace utilisateur" ci-dessus fait référence à l'espace mémoire fourni en plus de toute mémoire déjà dédiée aux composants matériels tels que la radio, la vidéo, etc.

Implémentations des périphériques automobiles:

  • [ 7.7 .1 / A] devrait inclure un port USB prenant en charge le mode périphérique.

Implémentations des périphériques automobiles:

  • [ 7.8 .1 / A-0-1] doivent inclure un microphone.

Implémentations des périphériques automobiles:

  • [ 7.8 .2 / A-0-1] Doit avoir une sortie audio et déclarer android.hardware.audio.output .

2.5.2. Multimédia

Les implémentations des périphériques automobiles doivent prendre en charge le codage audio suivant:

  • [ 5.1 / A-0-1] Profil AAC MPEG-4 (AAC LC)
  • [ 5.1 / A-0-2] MPEG-4 HE AAC Profil (AAC +)
  • [ 5.1 / A-0-3] ELD AAC (AAC amélioré AAC)

Les implémentations des périphériques automobiles doivent prendre en charge le codage vidéo suivant:

  • [ 5.2 / A-0-1] H.264 AVC
  • [ 5.2 / A-0-2] VP8

Les implémentations de périphériques automobiles doivent prendre en charge le décodage vidéo suivant:

  • [ 5.3 / A-0-1] H.264 AVC
  • [ 5.3 / A-0-2] MPEG-4 SP
  • [ 5.3 / A-0-3] VP8
  • [ 5.3 / A-0-4] VP9

Les implémentations des périphériques automobiles sont fortement recommandées pour prendre en charge le décodage vidéo suivant:

  • [ 5.3 / A-SR] H.265 HEVC

2.5.3. Logiciel

Implémentations des périphériques automobiles:

  • [ 3 / A-0-1] Doit déclarer la fonctionnalité android.hardware.type.automotive .

  • [ 3 / A-0-2] doit prendre en charge UIMode = UI_MODE_TYPE_CAR .

  • [ 3 / A-0-3] doit prendre en charge toutes les API publiques dans android.car.* Espace de noms.

  • [ 3.4 .1 / A-0-1] Doit fournir une implémentation complète de l'API android.webkit.Webview .

  • [ 3.8 .3 / A-0-1] doit afficher des notifications qui utilisent l'API Notification.CarExtender lorsqu'ils sont demandés par des applications tierces.

  • [ 3.8 .4 / a-sr] sont fortement recommandés pour implémenter un assistant sur l'appareil pour gérer l' action d'assistance .

  • [ 3.13 / a-sr] sont fortement recommandés pour inclure un composant UI de paramètres rapides.

Si les implémentations des périphériques automobiles incluent un bouton poussoir-talk, ils:

  • [ 3.8 .4 / A-1-1] Doit utiliser une courte appuyer sur le bouton Push-to-Talk comme interaction désignée pour lancer l'application d'assistance sélectionnée par l'utilisateur, en d'autres termes de l'application qui implémente VoiceInteractionService .

Implémentations des périphériques automobiles:

  • [ 3.14 / A-0-1] Doit inclure un cadre d'interface utilisateur pour prendre en charge les applications tierces à l'aide des API média comme décrit dans la section 3.14 .

2.5.4. Performance et puissance

Si les implémentations des périphériques automobiles incluent des fonctionnalités pour améliorer la gestion de la puissance des appareils qui sont incluses dans AOSP ou étendent les fonctionnalités incluses dans AOSP, elles:

  • [ 8.3 / A-1-1] Doit fournir des offres d'utilisateurs pour activer et désactiver la fonction d'économie de batterie.
  • [ 8.3 / A-1-2] Doit fournir des offres d'utilisateurs pour afficher toutes les applications qui sont exemptées des modes d'économie d'électricité de l'application et de Doze.

Implémentations des périphériques automobiles:

  • [ 8.2 / A-0-1] Doit signaler le nombre d'octets lus et écrits à un stockage non volatile par UID de chaque processus afin que les statistiques soient disponibles pour les développeurs via System API android.car.storagemonitoring.CarStorageMonitoringManager . Le projet Open Source Android répond à l'exigence via le module du noyau uid_sys_stats .
  • [ 8.4 / A-0-1] Doit fournir un profil d'alimentation par composant qui définit la valeur de consommation actuelle pour chaque composant matériel et la décharge de batterie approximative provoquée par les composants au fil du temps, comme indiqué dans le site du projet Open Source Android.
  • [ 8.4 / A-0-2] Doit signaler toutes les valeurs de consommation d'énergie en milliampères d'heures (MAH).
  • [ 8.4 / A-0-3] Doit signaler la consommation d'énergie du CPU par UID de chaque processus. Le projet Open Source Android répond aux exigences via l'implémentation du module du noyau uid_cputime .
  • [ 8.4 / a] doit être attribué au composant matériel lui-même s'il est incapable d'attribuer l'utilisation d'alimentation du composant matériel à une application.
  • [ 8.4 / A-0-4] Doit rendre cette utilisation d'alimentation disponible via la commande adb shell dumpsys batterystats Shellysys au développeur de l'application.

2.5.5. Modèle de sécurité

Si les implémentations de périphériques automobiles prennent en charge plusieurs utilisateurs, ils:

  • [ 9.5 / A-1-1] doit inclure un compte invité qui permet toutes les fonctions fournies par le système de véhicules sans obliger un utilisateur à se connecter.

Si les implémentations des périphériques automobiles prennent en charge un écran de verrouillage sécurisé, ils:

Implémentations des périphériques automobiles:

  • [ 9.14 / A-0-1] DOIT GORESKEDS Messages des sous-systèmes de véhicules Android Framework, par exemple, Autoriser les types de messages autorisés et les sources de messages.
  • [ 9.14 / A-0-2] DOIT Watchdog contre les attaques de déni de service du cadre Android ou des applications tierces. Ces gardes contre les logiciels malveillants inondant le réseau de véhicules de trafic, ce qui peut entraîner des sous-systèmes de véhicules défectueux.

2.6. Exigences de tablette

Une tablette Android fait référence à une implémentation de périphérique Android qui répond à tous les critères suivants:

  • Généralement utilisé en tenant entre les deux mains.
  • N'a pas de configuration à clapet ou convertible.
  • Toute implémentation de clavier physique utilisée avec l'appareil doit se connecter au moyen d'une connexion standard.
  • A une source d'alimentation qui fournit une mobilité, comme une batterie.
  • A une taille d'écran diagonale physique dans la plage de 7 à 18 pouces.

Les implémentations de tablette ont des exigences similaires aux implémentations de périphériques portables. Les exceptions sont indiquées par et * dans cette section et notées pour référence dans cette section.

2.4.1. Matériel

Taille de l'écran

  • [ 7.1 .1.1 / TAB-0-1] Doit avoir un écran dans la plage de 7 à 18 pouces.

Mémoire et stockage minimum (section 7.6.1)

Les densités d'écran répertoriées pour les écrans petits / normaux dans les exigences portables ne sont pas applicables aux tablettes.

Mode périphérique USB (section 7.7.1)

Si les implémentations de tablettes incluent un port USB prenant en charge le mode périphérique, ils:

  • [ 7.7.1 / TAB] peut implémenter l'API Android Open Accessory (AOA).

Mode de réalité virtuelle (section 7.9.1)

Réalité virtuelle Haute performance (section 7.9.2)

Les exigences de réalité virtuelle ne sont pas applicables aux tablettes.

3. Logiciel

3.1. Compatibilité des API gérées

L'environnement d'exécution de bytecode Dalvik géré est le véhicule principal pour les applications Android. L'interface de programmation d'applications Android (API) est l'ensemble des interfaces de plate-forme Android exposées aux applications exécutées dans l'environnement d'exécution géré.

Implémentations d'appareils :

  • [C-0-1] doit fournir des implémentations complètes, y compris tous les comportements documentés, de toute API documentée exposée par le SDK Android ou toute API décorée du marqueur "@SystemAPI" dans le code source Android en amont.

  • [C-0-2] Doit prendre en charge / préserver toutes les classes, méthodes et éléments associés marqués par l'annotation TestAPI (@TestAPI).

  • [C-0-3] ne doit pas omettre aucune API gérée, modifier les interfaces ou signatures de l'API, s'écarter du comportement documenté ou inclure des non-opérations, sauf lorsqu'il est spécifiquement autorisé par cette définition de compatibilité.

  • [C-0-4] doit toujours garder les API présentes et se comporter de manière raisonnable, même lorsque certaines fonctionnalités matérielles pour lesquelles Android comprend des API sont omises. Voir la section 7 pour des exigences spécifiques pour ce scénario.

  • [C-0-5] Doit restreindre l'utilisation de l'utilisation de l'application 3rd-partis des API cachés, définies comme des API dans l'espace de noms Android décoré avec l'annotation @hidden mais pas avec un @SystemAPI ou @TestApi , comme décrit dans les documents SDK et expédiez avec chaque API cachée sur les mêmes listes restreintes que celles fournies via la liste provisoire et les fichiers délicataires dans les prebuilts/runtime/appcompat/ chemin pour la branche de niveau API appropriée dans l'AOSP. Cependant eux:

    • Peut, si une API cachée est absente ou implémentée différemment lors de la mise en œuvre de l'appareil, déplacez l'API caché dans le délice ou omettez-le à partir de toutes les listes restreintes.
    • Peut, si une API cachée n'existe pas déjà dans l'AOSP, ajoutez l'API caché à l'une des listes restreintes.
    • Peut implémenter un mécanisme de mise à jour dynamique qui déplace une API cachée d'une liste restreinte dans une liste moins restrictive, à l'exception de la liste d'autoroute.

3.1.1. Extensions Android

Android comprend le support de l'extension des API gérées tout en conservant la même version au niveau de l'API.

  • [C-0-1] Les implémentations de périphériques Android doivent précharger la mise en œuvre AOSP de la bibliothèque partagée ExtShared et des services ExtServices services avec des versions supérieures ou égales aux versions minimales autorisées par chaque niveau d'API. Par exemple, les implémentations de périphériques Android 7.0, l'exécution du niveau 24 de l'API 24 doivent inclure au moins la version 1.

3.1.2. Bibliothèque Android

En raison de la dépréciation du client Apache HTTP , implémentations de périphériques:

  • [C-0-1] ne doit pas placer la bibliothèque org.apache.http.legacy dans le BootClassPath.
  • [C-0-2] doit ajouter la bibliothèque org.apache.http.legacy à l'application ClassPath uniquement lorsque l'application satisfait l'une des conditions suivantes:
    • Cible le niveau de l'API 28 ou plus bas.
    • Déclare dans son manifeste qu'il a besoin de la bibliothèque en définissant l'attribut android:name de <uses-library> sur org.apache.http.legacy .

La mise en œuvre de l'AOSP répond à ces exigences.

3.2. Compatibilité des API logicielles

En plus des API gérées de la section 3.1 , Android comprend également une API «Soft» significative uniquement «Soft», sous la forme de choses telles que les intentions, les autorisations et les aspects similaires des applications Android qui ne peuvent pas être appliquées au moment de la compilation des applications.

3.2.1. Autorisations

  • [C-0-1] Les implémenteurs de périphériques doivent prendre en charge et appliquer toutes les constantes d'autorisation comme documentée par la page de référence d'autorisation . Notez que la section 9 répertorie les exigences supplémentaires liées au modèle de sécurité Android.

3.2.2. Paramètres de construction

Les API Android comprennent un certain nombre de constantes sur la classe Android.os.build qui sont destinées à décrire l'appareil actuel.

  • [C-0-1] Pour fournir des valeurs cohérentes et significatives à travers les implémentations de périphériques, le tableau ci-dessous comprend des restrictions supplémentaires sur les formats de ces valeurs auxquelles les implémentations de dispositifs doivent se conformer.
Paramètre Détails
Version.release La version du système Android en cours d'exécution, dans un format lisible par l'homme. Ce champ doit avoir l'une des valeurs de chaîne définies en 9 .
Version.sdk La version du système Android en cours d'exécution, dans un format accessible au code d'application tierce. Pour Android 9, ce champ doit avoir la valeur entière 9_int.
Version.sdk_int La version du système Android en cours d'exécution, dans un format accessible au code d'application tierce. Pour Android 9, ce champ doit avoir la valeur entière 9_int.
Version.incimental Une valeur choisie par l'implémenteur de l'appareil désignant la version spécifique du système Android en cours d'exécution, dans un format lisible par l'homme. Cette valeur ne doit pas être réutilisée pour différentes versions mises à disposition pour les utilisateurs finaux. Une utilisation typique de ce champ consiste à indiquer quel numéro de build ou quel identifiant de modification de contrôle de source a été utilisé pour générer la build. Il n'y a aucune exigence sur le format spécifique de ce champ, sauf qu'il NE DOIT PAS être nul ou une chaîne vide ("").
CONSEIL Une valeur choisie par le responsable de la mise en œuvre du périphérique identifiant le matériel interne spécifique utilisé par le périphérique, dans un format lisible par l'homme. Une utilisation possible de ce champ est d'indiquer la révision spécifique de la carte alimentant l'appareil. La valeur de ce champ doit être encodable sous forme d'ASCII 7 bits et corresponde à l'expression régulière «^ [a-za-z0-9 _-] + $».
MARQUE Une valeur reflétant le nom de marque associé à l'appareil connu des utilisateurs finaux. Doit être au format lisible par l'homme et doit représenter le fabricant de l'appareil ou de la marque d'entreprise dans laquelle l'appareil est commercialisé. La valeur de ce champ doit être encodable sous forme d'ASCII 7 bits et corresponde à l'expression régulière «^ [a-za-z0-9 _-] + $».
Supporté_abis Le nom du jeu d'instructions (type de CPU + convention ABI) du code natif. Voir la section 3.3. Compatibilité de l'API native .
Pris en charge_32_bit_abis Le nom du jeu d'instructions (type de CPU + convention ABI) du code natif. Voir la section 3.3. Compatibilité de l'API native .
Pris en charge_64_bit_abis Le nom du deuxième jeu d'instructions (type de CPU + convention ABI) du code natif. Voir la section 3.3. Compatibilité de l'API native .
CPU_ABI Le nom du jeu d'instructions (type de CPU + convention ABI) du code natif. Voir la section 3.3. Compatibilité de l'API native .
CPU_ABI2 Le nom du deuxième jeu d'instructions (type de CPU + convention ABI) du code natif. Voir la section 3.3. Compatibilité de l'API native .
APPAREIL Une valeur choisie par l'implémentateur de périphérique contenant le nom de développement ou le nom de code identifiant la configuration des fonctionnalités matérielles et la conception industrielle de l'appareil. La valeur de ce champ doit être encodable sous forme d'ASCII 7 bits et corresponde à l'expression régulière «^ [a-za-z0-9 _-] + $». Ce nom de l'appareil ne doit pas changer pendant la durée de vie du produit.
EMPREINTE DIGITALE Chaîne qui identifie de manière unique cette build. Il DEVRAIT être raisonnablement lisible par l'homme. Il DOIT suivre ce modèle :

$ (Marque) / $ (produit) /
$ (Device): $ (version.release) / $ (id) / $ (version.incremental): $ (type) / $ (tags)

Par exemple:

acme / myproduct /
MyDevice: 9 / LMYXX / 3359: UserDebug / Test-Keys

L’empreinte digitale NE DOIT PAS inclure de caractères d’espacement. Si d'autres champs inclus dans le modèle ci-dessus comportent des caractères d'espacement, ils DOIVENT être remplacés dans l'empreinte digitale de construction par un autre caractère, tel que le caractère de soulignement ("_"). La valeur de ce champ DOIT être codable en ASCII 7 bits.

MATÉRIEL Le nom du matériel (à partir de la ligne de commande du noyau ou /proc). Il DEVRAIT être raisonnablement lisible par l'homme. La valeur de ce champ doit être encodable sous forme d'ASCII 7 bits et corresponde à l'expression régulière «^ [a-za-z0-9 _-] + $».
HÔTE Une chaîne qui identifie uniquement l'hôte sur lequel la construction a été construite, au format lisible par l'homme. Il n'y a aucune exigence sur le format spécifique de ce champ, sauf qu'il NE DOIT PAS être nul ou une chaîne vide ("").
IDENTIFIANT Un identifiant choisi par l'implémentateur de périphérique pour désigner une version spécifique, au format lisible par l'homme. Ce champ peut être le même que android.os.Build.VERSION.INCREMENTAL, mais DEVRAIT être une valeur suffisamment significative pour que les utilisateurs finaux puissent faire la distinction entre les versions de logiciels. La valeur de ce champ doit être encodable sous forme d'ASCII 7 bits et corresponde à l'expression régulière «^ [a-za-z0-9 ._-] + $».
FABRICANT Le nom commercial du fabricant d'équipement d'origine (OEM) du produit. Il n'y a aucune exigence sur le format spécifique de ce champ, sauf qu'il NE DOIT PAS être nul ou une chaîne vide (""). Ce champ ne doit pas changer au cours de la durée de vie du produit.
MODÈLE Une valeur choisie par le responsable de la mise en œuvre du périphérique contenant le nom du périphérique tel que connu de l'utilisateur final. Cela DEVRAIT être le même nom sous lequel l'appareil est commercialisé et vendu aux utilisateurs finaux. Il n'y a aucune exigence sur le format spécifique de ce champ, sauf qu'il NE DOIT PAS être nul ou une chaîne vide (""). Ce champ ne doit pas changer au cours de la durée de vie du produit.
PRODUIT Une valeur choisie par l'implémentateur de périphérique contenant le nom de développement ou le nom de code du produit spécifique (SKU) qui doit être unique au sein de la même marque. DOIT être lisible par l'homme, mais n'est pas nécessairement destiné à être visualisé par les utilisateurs finaux. La valeur de ce champ doit être encodable sous forme d'ASCII 7 bits et corresponde à l'expression régulière «^ [a-za-z0-9 _-] + $». Ce nom de produit ne doit pas changer pendant la durée de vie du produit.
EN SÉRIE Doit retourner "inconnu".
MOTS CLÉS Une liste de balises séparées par des virgules choisies par l'implémentateur de périphériques qui distingue encore la construction. Ce champ doit avoir l'une des valeurs correspondant aux trois configurations de signature de plate-forme Android typiques: keys de version, clés de dévalage, clés de test.
TEMPS Une valeur représentant l’horodatage du moment où la génération a eu lieu.
TAPER Une valeur choisie par l'implémenteur du périphérique spécifiant la configuration d'exécution de la build. Ce champ doit avoir l'une des valeurs correspondant aux trois configurations d'exécution Android typiques: utilisateur, userDebug ou Eng.
UTILISATEUR Un nom ou un ID utilisateur de l'utilisateur (ou de l'utilisateur automatisé) qui a généré la build. Il n'y a aucune exigence sur le format spécifique de ce champ, sauf qu'il NE DOIT PAS être nul ou une chaîne vide ("").
Sécurité_patch Une valeur indiquant le niveau de correctif de sécurité d'une construction. Cela doit signifier que la construction n'est en aucun cas vulnérable à aucun des problèmes décrits via le bulletin de sécurité publique Android désigné. Il doit être dans le format [yyyy-mm-dd], correspondant à une chaîne définie documentée dans le bulletin de sécurité publique Android ou dans Android Security Advisory , par exemple "2015-11-01".
Base_os Une valeur représentant le paramètre d'empreinte digitale de la construction qui est par ailleurs identique à cette version, à l'exception des correctifs fournis dans le bulletin de sécurité publique Android. Il doit signaler la valeur correcte et si une telle version n'existe pas, signalez une chaîne vide ("").
Chargeur de démarrage Une valeur choisie par l'implémentateur de périphérique identifiant la version spécifique du chargeur de démarrage interne utilisé dans l'appareil, au format lisible par l'homme. La valeur de ce champ doit être encodable sous forme d'ASCII 7 bits et corresponde à l'expression régulière «^ [a-za-z0-9 ._-] + $».
getradioversion () Doit (être ou renvoyer) une valeur choisie par l'implémentateur de périphérique identifiant la version de radio / modem interne spécifique utilisée dans l'appareil, au format lisible par l'homme. Si un périphérique n'a pas de radio / modem interne, il doit retourner null. La valeur de ce champ doit être codable sous forme de 7 bits ASCII et corresponde à l'expression régulière «^ [a-za-z0-9 ._-,] + $».
getSerial () Doit (être ou retourner) un numéro de série matériel, qui doit être disponible et unique sur les appareils avec le même modèle et le même fabricant. La valeur de ce champ doit être codable sous forme de 7 bits ASCII et corresponde à l'expression régulière «^ [a-za-z0-9 ._-,] + $».

3.2.3. Compatibilité des intentions

3.2.3.1. Intentions principales de l'application

Les intentions Android permettent aux composants de l'application de demander des fonctionnalités d'autres composants Android. Le projet Android Upstream comprend une liste d'applications considérées comme des applications Android principales, qui met en œuvre plusieurs modèles d'intention pour effectuer des actions communes.

  • [C-0-1] Les implémentations de l'appareil doivent précharger une ou plusieurs applications ou composants de service avec un gestionnaire d'intention, pour tous les modèles de filtre d'intention publique définis par les applications Android de base suivantes dans AOSP:

    • Horloge de bureau
    • Navigateur
    • Calendrier
    • Contacts
    • Galerie
    • Recherche globale
    • Lanceur
    • Musique
    • Paramètres
3.2.3.2. Résolution d'intention
  • [C-0-1] Comme Android est une plate-forme extensible, les implémentations de périphériques doivent permettre à chaque modèle d'intention référencé dans la section 3.2.3.1 , à l'exception des paramètres, d'être remplacé par des applications tierces. L'implémentation open source Android en amont le permet par défaut.

  • [C-0-2] Les implémenteurs DVICE ne doivent pas attacher des privilèges spéciaux à l'utilisation par les applications système de ces modèles d'intention, ni empêcher les applications tierces de se lier et de supposer le contrôle de ces modèles. Cette interdiction comprend spécifiquement, mais sans s'y limiter, la désactivation de l'interface utilisateur «Chooser» qui permet à l'utilisateur de sélectionner entre plusieurs applications qui gèrent toutes le même modèle d'intention.

  • [C-0-3] Les implémentations de périphériques doivent fournir une interface utilisateur pour les utilisateurs afin de modifier l'activité par défaut pour les intentions.

  • Cependant, les implémentations de périphériques peuvent fournir des activités par défaut pour des modèles URI spécifiques (par exemple, http://play.google.com) lorsque l'activité par défaut fournit un attribut plus spécifique pour l'URI de données. Par exemple, un modèle de filtre d'intention spécifiant les données uri «http://www.android.com» est plus spécifique que le modèle d'intention central du navigateur pour «http: //».

Android comprend également un mécanisme pour les applications tierces afin de déclarer un comportement de liaison de l'application par défaut faisant autorité pour certains types d'intentions d'URI Web. Lorsque de telles déclarations faisant autorité sont définies dans les modèles de filtre à intention d'une application, les implémentations de l'appareil:

  • [C-0-4] doit tenter de valider tout filtre d'intention en effectuant les étapes de validation définies dans la spécification des liens d'actifs numériques, comme implémenté par le gestionnaire de package dans le projet Open Source Android en amont.
  • [C-0-5] Doit tenter la validation des filtres d'intention lors de l'installation de l'application et définir tous les filtres d'intention URI validés avec succès en tant que gestionnaires d'application par défaut pour leurs URI.
  • Peut définir des filtres d'intention URI spécifiques en tant que gestionnaires d'applications par défaut pour leurs URI, s'ils sont vérifiés avec succès, mais d'autres filtres URI candidats échouent. Si une implémentation de périphérique le fait, elle doit fournir à l'utilisateur des remplacements de motifs par URI appropriés dans le menu des paramètres.
  • Doit fournir à l'utilisateur des contrôles des liens d'application par application dans les paramètres comme suit:
    • [C-0-6] L'utilisateur doit être en mesure de remplacer de manière globale le comportement de liens d'application par défaut pour qu'une application soit: toujours ouverte, toujours demander ou ne jamais ouvrir, qui doit s'appliquer à tous les filtres d'intention URI candidats également.
    • [C-0-7] L'utilisateur doit être en mesure de voir une liste des filtres d'intention URI candidats.
    • L'implémentation de l'appareil peut fournir à l'utilisateur la possibilité de remplacer les filtres d'intention URI candidats spécifiques qui ont été vérifiés avec succès, sur une base de filtre par intention.
    • [C-0-8] La mise en œuvre de l'appareil doit fournir aux utilisateurs la possibilité d'afficher et de remplacer les filtres d'intention URI candidats spécifiques si l'implémentation de l'appareil permet aux filtres d'intention URI candidats de réussir la vérification tandis que d'autres peuvent échouer.
3.2.3.3. Espaces de noms d'intention
  • [C-0-1] Les implémentations de périphériques ne doivent pas inclure un composant Android qui honore tout nouveau modèle d'intention d'intention ou de diffusion en utilisant une action, une catégorie ou une autre chaîne de clé dans Android. ou com.android. espace de noms.
  • [C-0-2] Les implémenteurs de périphériques ne doivent pas inclure de composants Android qui honorent tout nouveau modèle d'intention d'intention ou de diffusion en utilisant une action, une catégorie ou une autre chaîne clé dans un espace de package appartenant à une autre organisation.
  • [C-0-3] Les implémenteurs de périphériques ne doivent pas modifier ou étendre les modèles d'intention utilisés par les applications principales répertoriées dans la section 3.2.3.1 .
  • Les implémentations des appareils peuvent inclure des modèles d'intention utilisant clairement les espaces de noms et évidemment associés à leur propre organisation. Cette interdiction est analogue à celle spécifiée pour les classes de langue Java dans la section 3.6 .
3.2.3.4. Intentions de diffusion

Les applications tierces reposent sur la plate-forme pour diffuser certaines intentions pour les informer des modifications du matériel ou de l'environnement logiciel.

Implémentations d'appareils :

  • [C-0-1] doit diffuser les intentions publiques de diffusion en réponse aux événements système appropriés comme décrit dans la documentation SDK. Notez que cette exigence n'est pas en conflit avec la section 3.5 car la limitation des applications d'arrière-plan est également décrite dans la documentation du SDK.
3.2.3.5. Paramètres de l'application par défaut

Android comprend des paramètres qui offrent aux utilisateurs un moyen facile de sélectionner leurs applications par défaut, par exemple pour l'écran d'accueil ou les SMS.

Lorsqu'il est logique, les implémentations de périphériques doivent fournir un menu de paramètres similaires et être compatible avec le modèle de filtre d'intention et les méthodes d'API décrites dans la documentation SDK comme ci-dessous.

Si les implémentations de périphériques rapportent android.software.home_screen , elles:

Si les implémentations de périphériques rapportent android.hardware.telephony , elles:

  • [C-2-1] doit fournir un menu de paramètres qui appellera le android.provider.Telephony.ACTION_CHANGE_DEFAULT l'intention d'afficher une boîte de dialogue pour modifier l'application SMS par défaut.

  • [C-2-2] doit honorer le android.telecom.action.CHANGE_DEFAULT_DIALER l'intention d'afficher une boîte de dialogue pour permettre à l'utilisateur de modifier l'application de téléphone par défaut.

    • Doit utiliser l'interface utilisateur de l'application de téléphone par défaut sélectionnée par l'utilisateur pour les appels entrants et sortants, à l'exception des appels d'urgence, qui utiliseraient l'application de téléphone préinstallée.
  • [C-2-3] Doit honorer le android.telecom.action.change_phone_accouts l'intention de fournir aux utilisateurs l'octroi pour configurer les ConnectionServices associés aux PhoneAccounts , ainsi qu'un phoneAccount par défaut que le fournisseur de services de télécommunications utilisera pour placer des appels sortants. L'implémentation AOSP répond à cette exigence en incluant un menu "Option de comptes d'appels" dans le menu des paramètres "Appels".

Si les implémentations de périphériques rapportent android.hardware.nfc.hce , elles:

Si les implémentations de périphériques prennent en charge le VoiceInteractionService et ont plus d'une application en utilisant cette API installée à la fois, elles:

3.2.4. Activités sur les écrans secondaires

Si les implémentations de périphériques permettent de lancer des activités Android normales sur des écrans secondaires, ils:

  • [C-1-1] doit définir le drapeau de fonctionnalité android.software.activities_on_secondary_displays .
  • [C-1-2] doit garantir la compatibilité des API similaire à une activité exécutée sur l'affichage principal.
  • [C-1-3] doit décrocher la nouvelle activité sur le même affichage que l'activité qui l'a lancé, lorsque la nouvelle activité est lancée sans spécifier un affichage cible via l'API ActivityOptions.setLaunchDisplayId() .
  • [C-1-4] doit détruire toutes les activités, lorsqu'un affichage avec l' Display.FLAG_PRIVATE est supprimé.
  • [C-1-5] Doit redimensionner en conséquence toutes les activités sur VirtualDisplay si l'affichage lui-même est redimensionné.
  • Peut afficher un IME (éditeur de méthode d'entrée, un contrôle utilisateur qui permet aux utilisateurs de saisir du texte) sur l'affichage principal, lorsqu'un champ de saisie de texte se concentre sur un affichage secondaire.
  • Doit implémenter la mise au point d'entrée sur l'affichage secondaire indépendamment de l'affichage principal, lorsque les entrées de contact ou de clé sont prises en charge.
  • Devrait avoir android.content.res.Configuration qui correspond à cet affichage pour être affiché, fonctionner correctement et maintenir la compatibilité si une activité est lancée sur l'affichage secondaire.

Si les implémentations de périphériques permettent de lancer des activités Android normales sur les écrans secondaires et les écrans primaires et secondaires ont différents Android.util.displayMetrics :

  • [C-2-1] Les activités non résistantes (qui ont resizeableActivity=false dans AndroidManifest.xml ) et les applications ciblant le niveau de l'API 23 ou inférieur ne doivent pas être autorisées sur les écrans secondaires.

Si les implémentations de périphériques permettent de lancer des activités Android normales sur des écrans secondaires et un affichage secondaire a le drapeau Android.view.display.flag_private :

  • [C-3-1] Seul le propriétaire de cet affichage, du système et des activités qui sont déjà sur cet écran doivent être en mesure de se lancer. Tout le monde peut se lancer sur un affichage qui a Android.view.display.flag_public .

3.3. Compatibilité API native

La compatibilité du code natif est un défi. Pour cette raison, les implémenteurs de périphériques sont:

  • [SR] a fortement recommandé d'utiliser les implémentations des bibliothèques énumérées ci-dessous à partir du projet Open Source Android en amont.

3.3.1. Interfaces binaires d'application

Les bytecode Dalvik gérés peuvent appeler le code natif fourni dans le fichier .apk de l'application en tant que fichier elfe .so compilé pour l'architecture matérielle de périphérique appropriée. Comme le code natif dépend fortement de la technologie du processeur sous-jacent, Android définit un certain nombre d'interfaces binaires d'applications (ABIS) dans le NDK Android.

Implémentations d'appareils :

  • [C-0-1] doit être compatible avec un ou plusieurs ABI définis et implémenter la compatibilité avec le NDK Android.
  • [C-0-2] doit inclure la prise en charge du code exécuté dans l'environnement géré pour appeler le code natif, en utilisant la sémantique standard de l'interface native Java (JNI).
  • [C-0-3] doit être compatible avec source (c.-à-d. Compatible en en-tête) et compatible binaire (pour l'ABI) avec chaque bibliothèque requise dans la liste ci-dessous.
  • [C-0-5] Doit signaler avec précision l'interface binaire d'application native (ABI) prise en charge par l'appareil, via le android.os.Build.SUPPORTED_ABIS , android.os.Build.SUPPORTED_32_BIT_ABIS , et android.os.Build.SUPPORTED_64_BIT_ABIS Paramètres , Chacun une liste séparée par des virgules d'Abis ordonnée du moins au moins préféré.
  • [C-0-6] doit signaler, via les paramètres ci-dessus, un sous-ensemble de la liste suivante d'Abis et ne doit signaler aucun ABI et non sur la liste.

    • armeabi
    • armeabi-v7a
    • arm64-v8a
    • x86
    • x86-64
    • [C-0-7] Doit créer toutes les bibliothèques suivantes, fournir des API natives, disponibles pour les applications qui incluent le code natif:

    • libaaudio.so (support audio natif d'Audio)

    • libandroid.so (prise en charge native des activités Android)
    • libc (bibliothèque C)
    • libcamera2ndk.so
    • libdl (éditeur de liens dynamique)
    • libEGL.so (gestion native des surfaces OpenGL)
    • libglesv1_cm.so (OpenGl es 1.x)
    • libGLESv2.so (OpenGL ES 2.0)
    • libglesv3.so (opengl es 3.x)
    • libicui18n.so
    • libicuuc.so
    • libjnigraphics.so
    • liblog (journalisation Android)
    • LibMeandk.so (support des API des médias natif)
    • libm (bibliothèque mathématique)
    • libneurnnetworks.so (API des réseaux de neurones)
    • libOpenMAXAL.so (prise en charge d'OpenMAX AL 1.0.1)
    • libOpenSLES.so (prise en charge audio d'OpenSL ES 1.0.1)
    • libr.So
    • libstdc ++ (support minimal pour C ++)
    • libvulkan.so (vulkan)
    • libz (compression Zlib)
    • Interface JNI
  • [C-0-8] ne doit pas ajouter ou supprimer les fonctions publiques des bibliothèques natives énumérées ci-dessus.

  • [C-0-9] doit répertorier des bibliothèques non AOSP supplémentaires exposées directement à des applications tierces dans /vendor/etc/public.libraries.txt .
  • [C-0-10] ne doit pas exposer d'autres bibliothèques natives, implémentées et fournies dans AOSP en tant que bibliothèques de systèmes, à des applications tierces ciblant le niveau de l'API 24 ou plus car elles sont réservées.
  • [C-0-11] MUST export all the OpenGL ES 3.1 and Android Extension Pack function symbols, as defined in the NDK, through the libGLESv3.so library. Note that while all the symbols MUST be present, section 7.1.4.1 describes in more detail the requirements for when the full implementation of each corresponding functions are expected.
  • [C-0-12] MUST export function symbols for the core Vulkan 1.0 function symbols, as well as the VK_KHR_surface , VK_KHR_android_surface , VK_KHR_swapchain , VK_KHR_maintenance1 , and VK_KHR_get_physical_device_properties2 extensions through the libvulkan.so library. Note that while all the symbols MUST be present, section 7.1.4.2 describes in more detail the requirements for when the full implementation of each corresponding functions are expected.
  • SHOULD be built using the source code and header files available in the upstream Android Open Source Project

Note that future releases of Android may introduce support for additional ABIs.

3.3.2. 32-bit ARM Native Code Compatibility

If device implementations report the support of the armeabi ABI, they:

  • [C-3-1] MUST also support armeabi-v7a and report its support, as armeabi is only for backwards compatibility with older apps.

If device implementations report the support of the armeabi-v7a ABI, for apps using this ABI, they:

  • [C-2-1] MUST include the following lines in /proc/cpuinfo , and SHOULD NOT alter the values on the same device, even when they are read by other ABIs.

    • Features: , followed by a list of any optional ARMv7 CPU features supported by the device.
    • CPU architecture: , followed by an integer describing the device's highest supported ARM architecture (eg, "8" for ARMv8 devices).
  • [C-2-2] MUST always keep the following operations available, even in the case where the ABI is implemented on an ARMv8 architecture, either through native CPU support or through software emulation:

    • SWP and SWPB instructions.
    • SETEND instruction.
    • CP15ISB, CP15DSB, and CP15DMB barrier operations.
  • [C-2-3] MUST include support for the Advanced SIMD (aka NEON) extension.

3.4. Compatibilité Web

3.4.1. Compatibilité WebView

If device implementations provide a complete implementation of the android.webkit.Webview API, they:

  • [C-1-1] MUST report android.software.webview .
  • [C-1-2] MUST use the Chromium Project build from the upstream Android Open Source Project on the Android 9 branch for the implementation of the android.webkit.WebView API.
  • [C-1-3] The user agent string reported by the WebView MUST be in this format:

    Mozilla/5.0 (Linux; Android $(VERSION); [$(MODEL)] [Build/$(BUILD)]; wv) AppleWebKit/537.36 (KHTML, like Gecko) Version/4.0 $(CHROMIUM_VER) Mobile Safari/537.36

    • The value of the $(VERSION) string MUST be the same as the value for android.os.Build.VERSION.RELEASE.
    • The $(MODEL) string MAY be empty, but if it is not empty it MUST have the same value as android.os.Build.MODEL.
    • "Build/$(BUILD)" MAY be omitted, but if it is present the $(BUILD) string MUST be the same as the value for android.os.Build.ID.
    • The value of the $(CHROMIUM_VER) string MUST be the version of Chromium in the upstream Android Open Source Project.
    • Device implementations MAY omit Mobile in the user agent string.
  • The WebView component SHOULD include support for as many HTML5 features as possible and if it supports the feature SHOULD conform to the HTML5 specification .

3.4.2. Compatibilité du navigateur

If device implementations include a standalone Browser application for general web browsing, they:

  • [C-1-1] MUST support each of these APIs associated with HTML5:
  • [C-1-2] MUST support the HTML5/W3C webstorage API and SHOULD support the HTML5/W3C IndexedDB API . Notez qu'à mesure que les organismes de normalisation du développement Web privilégient IndexedDB par rapport au stockage Web, IndexedDB devrait devenir un composant obligatoire dans une future version d'Android.
  • MAY ship a custom user agent string in the standalone Browser application.
  • SHOULD implement support for as much of HTML5 as possible on the standalone Browser application (whether based on the upstream WebKit Browser application or a third-party replacement).

However, If device implementations do not include a standalone Browser application, they:

  • [C-2-1] MUST still support the public intent patterns as described in section 3.2.3.1 .

3.5. Compatibilité comportementale des API

Implémentations d'appareils :

  • [C-0-9] MUST ensure that API behavioral compatibility is applied for all installed apps unless they are restricted as described in Section 3.5.1 .
  • [C-0-10] MUST NOT implement the allowlisting approach that ensures API behavioral compatibility only for apps that are selected by device implementers.

The behaviors of each of the API types (managed, soft, native, and web) must be consistent with the preferred implementation of the upstream Android Open Source Project . Certains domaines spécifiques de compatibilité sont :

  • [C-0-1] Devices MUST NOT change the behavior or semantics of a standard intent.
  • [C-0-2] Devices MUST NOT alter the lifecycle or lifecycle semantics of a particular type of system component (such as Service, Activity, ContentProvider, etc.).
  • [C-0-3] Devices MUST NOT change the semantics of a standard permission.
  • Devices MUST NOT alter the limitations enforced on background applications. More specifically, for background apps:
    • [C-0-4] they MUST stop executing callbacks that are registered by the app to receive outputs from the GnssMeasurement and GnssNavigationMessage .
    • [C-0-5] they MUST rate-limit the frequency of updates that are provided to the app through the LocationManager API class or the WifiManager.startScan() method.
    • [C-0-6] if the app is targeting API level 25 or higher, they MUST NOT allow to register broadcast receivers for the implicit broadcasts of standard Android intents in the app's manifest, unless the broadcast intent requires a "signature" or "signatureOrSystem" protectionLevel permission or are on the exemption list .
    • [C-0-7] if the app is targeting API level 25 or higher, they MUST stop the app's background services, just as if the app had called the services' stopSelf() method, unless the app is placed on a temporary allowlist to handle a task that's visible to the user.
    • [C-0-8] if the app is targeting API level 25 or higher, they MUST release the wakelocks the app holds.
  • [C-0-9] Devices MUST return the following security providers as the first seven array values from the Security.getProviders() method, in the given order and with the given names (as returned by Provider.getName() ) and classes, unless the app has modified the list via insertProviderAt() or removeProvider() . Devices MAY return additional providers after the specified list of providers below.
    1. AndroidNSSP - android.security.net.config.NetworkSecurityConfigProvider
    2. AndroidOpenSSL - com.android.org.conscrypt.OpenSSLProvider
    3. CertPathProvider - sun.security.provider.CertPathProvider
    4. AndroidKeyStoreBCWorkaround - android.security.keystore.AndroidKeyStoreBCWorkaroundProvider
    5. BC - com.android.org.bouncycastle.jce.provider.BouncyCastleProvider
    6. HarmonyJSSE - com.android.org.conscrypt.JSSEProvider
    7. AndroidKeyStore - android.security.keystore.AndroidKeyStoreProvider

La liste ci-dessus n'est pas exhaustive. La suite de tests de compatibilité (CTS) teste des parties importantes de la plate-forme pour vérifier leur compatibilité comportementale, mais pas toutes. Il est de la responsabilité du responsable de la mise en œuvre de garantir la compatibilité comportementale avec le projet Android Open Source. Pour cette raison, les implémenteurs de périphériques DEVRAIENT utiliser le code source disponible via le projet Android Open Source lorsque cela est possible, plutôt que de réimplémenter des parties importantes du système.

3.5.1. Background Restriction

If device implementations implement the app restrictions that are included in AOSP or extend the app restrictions, they:

  • [C-SR] Are STRONGLY RECOMMENDED to provide user affordance where the user can see the list of restricted apps.
  • [C-1-2] MUST provide user affordance to turn on / off the restrictions on each app.
  • [C-1-3] MUST not automatically apply restrictions without evidence of poor system health behaviour, but MAY apply the restrictions on apps upon detection of poor system health behaviour like stuck wakelocks, long running services, and other criteria. The criteria MAY be determined by device implementers but MUST be related to the app's impact on the system health. Other criteria that is not purely related to the system health, such as the app's lack of popularity in the market, MUST NOT be used as criteria.
  • [C-1-4] MUST not automatically apply app restrictions for apps when a user has turned off app restrictions manually, and MAY suggest the user to apply app restrictions.
  • [C-1-5] MUST inform users if app restrictions are applied to an app automatically.
  • [C-1-6] MUST return true for ActivityManager.isBackgroundRestricted() when the restricted app calls this API.
  • [C-1-7] MUST NOT restrict the top foreground app that is explicitly used by the user.
  • [C-1-8] MUST suspend restrictions on an app that becomes the top foreground application when the user explicitly starts to use the app that used to be restricted.
  • [C-1-9] MUST report all app restriction events via UsageStats . If device implementations extend the app restrictions that are implemented in AOSP, MUST follow the implementation described in this document .

3.6. Espaces de noms d'API

Android suit les conventions d'espace de noms de package et de classe définies par le langage de programmation Java. Pour garantir la compatibilité avec les applications tierces, les implémenteurs de périphériques NE DOIVENT PAS apporter de modifications interdites (voir ci-dessous) à ces espaces de noms de packages :

  • java.*
  • javax.*
  • sun.*
  • android.*
  • androidx.*
  • com.android.*

That is, they:

  • [C-0-1] MUST NOT modify the publicly exposed APIs on the Android platform by changing any method or class signatures, or by removing classes or class fields.
  • [C-0-2] MUST NOT add any publicly exposed elements (such as classes or interfaces, or fields or methods to existing classes or interfaces) or Test or System APIs to the APIs in the above namespaces. A “publicly exposed element” is any construct that is not decorated with the “@hide” marker as used in the upstream Android source code.

Device implementers MAY modify the underlying implementation of the APIs, but such modifications:

  • [C-0-3] MUST NOT impact the stated behavior and Java-language signature of any publicly exposed APIs.
  • [C-0-4] MUST NOT be advertised or otherwise exposed to developers.

However, device implementers MAY add custom APIs outside the standard Android namespace, but the custom APIs:

  • [C-0-5] MUST NOT be in a namespace owned by or referring to another organization. For instance, device implementers MUST NOT add APIs to the com.google.* or similar namespace: only Google may do so. De même, Google NE DOIT PAS ajouter d'API aux espaces de noms d'autres sociétés.
  • [C-0-6] MUST be packaged in an Android shared library so that only apps that explicitly use them (via the <uses-library> mechanism) are affected by the increased memory usage of such APIs.

Si un implémenteur de périphérique propose d'améliorer l'un des espaces de noms de package ci-dessus (par exemple en ajoutant de nouvelles fonctionnalités utiles à une API existante ou en ajoutant une nouvelle API), l'implémenteur DEVRAIT visiter source.android.com et commencer le processus de contribution aux modifications et code, selon les informations sur ce site.

Notez que les restrictions ci-dessus correspondent aux conventions standard de dénomination des API dans le langage de programmation Java ; this section simply aims to reinforce those conventions and make them binding through inclusion in this Compatibility Definition.

3.7. Runtime Compatibility

Implémentations d'appareils :

  • [C-0-1] MUST support the full Dalvik Executable (DEX) format and Dalvik bytecode specification and semantics .

  • [C-0-2] MUST configure Dalvik runtimes to allocate memory in accordance with the upstream Android platform, and as specified by the following table. (See section 7.1.1 for screen size and screen density definitions.)

  • SHOULD use Android RunTime (ART), the reference upstream implementation of the Dalvik Executable Format, and the reference implementation's package management system.

  • SHOULD run fuzz tests under various modes of execution and target architectures to assure the stability of the runtime. Refer to JFuzz and DexFuzz in the Android Open Source Project website.

Note that memory values specified below are considered minimum values and device implementations MAY allocate more memory per application.

Mise en page de l'écran Densité de l'écran Minimum Application Memory
Android Watch 120 dpi (ldpi) 32 Mo
160 dpi (mdpi)
213 dpi (tvdpi)
240 dpi (hdpi) 36 Mo
280 dpi (280dpi)
320 dpi (xhdpi) 48MB
360 dpi (360dpi)
400 dpi (400dpi) 56 Mo
420 dpi (420dpi) 64 Mo
480 dpi (xxhdpi) 88MB
560 dpi (560dpi) 112MB
640 dpi (xxxhdpi) 154MB
small/normal 120 dpi (ldpi) 32 Mo
160 dpi (mdpi)
213 dpi (tvdpi) 48MB
240 dpi (hdpi)
280 dpi (280dpi)
320 dpi (xhdpi) 80MB
360 dpi (360dpi)
400 dpi (400dpi) 96 Mo
420 dpi (420dpi) 112MB
480 dpi (xxhdpi) 128 Mo
560 dpi (560dpi) 192MB
640 dpi (xxxhdpi) 256MB
grand 120 dpi (ldpi) 32 Mo
160 dpi (mdpi) 48MB
213 dpi (tvdpi) 80MB
240 dpi (hdpi)
280 dpi (280dpi) 96 Mo
320 dpi (xhdpi) 128 Mo
360 dpi (360dpi) 160MB
400 dpi (400dpi) 192MB
420 dpi (420dpi) 228MB
480 dpi (xxhdpi) 256MB
560 dpi (560dpi) 384MB
640 dpi (xxxhdpi) 512 Mo
très grand 120 dpi (ldpi) 48MB
160 dpi (mdpi) 80MB
213 dpi (tvdpi) 96 Mo
240 dpi (hdpi)
280 dpi (280dpi) 144MB
320 dpi (xhdpi) 192MB
360 dpi (360dpi) 240MB
400 dpi (400dpi) 288 Mo
420 dpi (420dpi) 336MB
480 dpi (xxhdpi) 384MB
560 dpi (560dpi) 576MB
640 dpi (xxxhdpi) 768 Mo

3.8. Compatibilité de l'interface utilisateur

3.8.1. Launcher (Home Screen)

Android includes a launcher application (home screen) and support for third-party applications to replace the device launcher (home screen).

If device implementations allow third-party applications to replace the device home screen, they:

  • [C-1-1] MUST declare the platform feature android.software.home_screen .
  • [C-1-2] MUST return the AdaptiveIconDrawable object when the third-party application use <adaptive-icon> tag to provide their icon, and the PackageManager methods to retrieve icons are called.

If device implementations include a default launcher that supports in-app pinning of shortcuts, they:

Conversely, if device implementations do not support in-app pinning of shortcuts, they:

If device implementations implement a default launcher that provides quick access to the additional shortcuts provided by third-party apps through the ShortcutManager API, they:

  • [C-4-1] MUST support all documented shortcut features (eg static and dynamic shortcuts, pinning shortcuts) and fully implement the APIs of the ShortcutManager API class.

If device implementations include a default launcher app that shows badges for the app icons, they:

  • [C-5-1] MUST respect the NotificationChannel.setShowBadge() API method. In other words, show a visual affordance associated with the app icon if the value is set as true , and do not show any app icon badging scheme when all of the app's notification channels have set the value as false .
  • MAY override the app icon badges with their proprietary badging scheme when third-party applications indicate support of the proprietary badging scheme through the use of proprietary APIs, but SHOULD use the resources and values provided through the notification badges APIs described in the SDK , such as the Notification.Builder.setNumber() and the Notification.Builder.setBadgeIconType() API.

3.8.2. Widgets

Android supports third-party app widgets by defining a component type and corresponding API and lifecycle that allows applications to expose an “AppWidget” to the end user.

If device implementations support third-party app widgets, they:

  • [C-1-1] MUST declare support for platform feature android.software.app_widgets .
  • [C-1-2] MUST include built-in support for AppWidgets and expose user interface affordances to add, configure, view, and remove AppWidgets directly within the Launcher.
  • [C-1-3] MUST be capable of rendering widgets that are 4 x 4 in the standard grid size. See the App Widget DesignGuidelines in the Android SDK documentation for details.
  • MAY support application widgets on the lock screen.

If device implementations support third-party app widgets and in-app pinning of shortcuts, they:

3.8.3. Notifications

Android includes Notification and NotificationManager APIs that allow third-party app developers to notify users of notable events and attract users' attention using the hardware components (eg sound, vibration and light) and software features (eg notification shade, system bar) of the device .

3.8.3.1. Presentation of Notifications

If device implementations allow third-party apps to notify users of notable events , they:

  • [C-1-1] MUST support notifications that use hardware features, as described in the SDK documentation, and to the extent possible with the device implementation hardware. Par exemple, si une implémentation de périphérique comprend un vibrateur, il doit implémenter correctement les API de vibration. Si une implémentation de périphérique manque de matériel, les API correspondantes doivent être implémentées en tant qu'interprètes. This behavior is further detailed in section 7 .
  • [C-1-2] MUST correctly render all resources (icons, animation files, etc.) provided for in the APIs, or in the Status/System Bar icon style guide , although they MAY provide an alternative user experience for notifications than that provided by the reference Android Open Source implementation.
  • [C-1-3] MUST honor and implement properly the behaviors described for the APIs to update, remove and group notifications.
  • [C-1-4] MUST provide the full behavior of the NotificationChannel API documented in the SDK.
  • [C-1-5] MUST provide a user affordance to block and modify a certain third-party app's notification per each channel and app package level.
  • [C-1-6] MUST also provide a user affordance to display deleted notification channels.
  • [C-1-7] MUST correctly render all resources (images, stickers, icons, etc.) provided through Notification.MessagingStyle alongside the notification text without additional user interaction. For example, MUST show all resources including icons provided through android.app.Person in a group conversation that is set through setGroupConversation .
  • [C-SR] Are STRONGLY RECOMMENDED to automatically surface a user affordance to block a certain third-party app's notification per each channel and app package level after the user dismisses that notification multiple times.
  • SHOULD support rich notifications.
  • SHOULD present some higher priority notifications as heads-up notifications.
  • SHOULD have a user affordance to snooze notifications.
  • MAY only manage the visibility and timing of when third-party apps can notify users of notable events to mitigate safety issues such as driver distraction.

If device implementations support rich notifications, they:

  • [C-2-1] MUST use the exact resources as provided through the Notification.Style API class and its subclasses for the presented resource elements.
  • SHOULD present each and every resource element (eg icon, title and summary text) defined in the Notification.Style API class and its subclasses.

If device implementations support heads-up notifications: they:

  • [C-3-1] MUST use the heads-up notification view and resources as described in the Notification.Builder API class when heads-up notifications are presented.
  • [C-3-2] MUST display the actions provided through Notification.Builder.addAction() together with the notification content without additional user interaction as described in the SDK .
3.8.3.2. Notification Listener Service

Android includes the NotificationListenerService APIs that allow apps (once explicitly enabled by the user) to receive a copy of all notifications as they are posted or updated.

If device implementations report the feature flag android.hardware.ram.normal , they:

  • [C-1-1] MUST correctly and promptly update notifications in their entirety to all such installed and user-enabled listener services, including any and all metadata attached to the Notification object.
  • [C-1-2] MUST respect the snoozeNotification() API call, and dismiss the notification and make a callback after the snooze duration that is set in the API call.

If device implementations have a user affordance to snooze notifications, they:

  • [C-2-1] MUST reflect the snoozed notification status properly through the standard APIs such as NotificationListenerService.getSnoozedNotifications() .
  • [C-2-2] MUST make this user affordance available to snooze notifications from each installed third-party app's, unless they are from persistent/foreground services.
3.8.3.3. DND (Do not Disturb)

If device implementations support the DND feature, they:

  • [C-1-1] MUST implement an activity that would respond to the intent ACTION_NOTIFICATION_POLICY_ACCESS_SETTINGS , which for implementations with UI_MODE_TYPE_NORMAL it MUST be an activity where the user can grant or deny the app access to DND policy configurations.
  • [C-1-2] MUST, for when the device implementation has provided a means for the user to grant or deny third-party apps to access the DND policy configuration, display Automatic DND rules created by applications alongside the user-created and pre-defined rules.
  • [C-1-3] MUST honor the suppressedVisualEffects values passed along the NotificationManager.Policy and if an app has set any of the SUPPRESSED_EFFECT_SCREEN_OFF or SUPPRESSED_EFFECT_SCREEN_ON flags, it SHOULD indicate to the user that the visual effects are suppressed in the DND settings menu.

Android includes APIs that allow developers to incorporate search into their applications and expose their application's data into the global system search. De manière générale, cette fonctionnalité consiste en une interface utilisateur unique à l'échelle du système qui permet aux utilisateurs de saisir des requêtes, d'afficher des suggestions au fur et à mesure de la saisie et d'afficher les résultats. The Android APIs allow developers to reuse this interface to provide search within their own apps and allow developers to supply results to the common global search user interface.

  • Android device implementations SHOULD include global search, a single, shared, system-wide search user interface capable of real-time suggestions in response to user input.

If device implementations implement the global search interface, they:

  • [C-1-1] MUST implement the APIs that allow third-party applications to add suggestions to the search box when it is run in global search mode.

If no third-party applications are installed that make use of the global search:

  • The default behavior SHOULD be to display web search engine results and suggestions.

Android also includes the Assist APIs to allow applications to elect how much information of the current context is shared with the assistant on the device.

If device implementations support the Assist action, they:

  • [C-2-1] MUST indicate clearly to the end user when the context is shared, by either:
    • Each time the assist app accesses the context, displaying a white light around the edges of the screen that meet or exceed the duration and brightness of the Android Open Source Project implementation.
    • For the preinstalled assist app, providing a user affordance less than two navigations away from the default voice input and assistant app settings menu , and only sharing the context when the assist app is explicitly invoked by the user through a hotword or assist navigation key input.
  • [C-2-2] The designated interaction to launch the assist app as described in section 7.2.3 MUST launch the user-selected assist app, in other words the app that implements VoiceInteractionService , or an activity handling the ACTION_ASSIST intent.

3.8.5. Alerts and Toasts

Applications can use the Toast API to display short non-modal strings to the end user that disappear after a brief period of time, and use the TYPE_APPLICATION_OVERLAY window type API to display alert windows as an overlay over other apps.

If device implementations include a screen or video output, they:

  • [C-1-1] MUST provide a user affordance to block an app from displaying alert windows that use the TYPE_APPLICATION_OVERLAY . The AOSP implementation meets this requirement by having controls in the notification shade.

  • [C-1-2] MUST honor the Toast API and display Toasts from applications to end users in some highly visible manner.

3.8.6. Thèmes

Android provides “themes” as a mechanism for applications to apply styles across an entire Activity or application.

Android includes a “Holo” and "Material" theme family as a set of defined styles for application developers to use if they want to match the Holo theme look and feel as defined by the Android SDK.

If device implementations include a screen or video output, they:

  • [C-1-1] MUST NOT alter any of the Holo theme attributes exposed to applications.
  • [C-1-2] MUST support the “Material” theme family and MUST NOT alter any of the Material theme attributes or their assets exposed to applications.

Android also includes a “Device Default” theme family as a set of defined styles for application developers to use if they want to match the look and feel of the device theme as defined by the device implementer.

Android supports a variant theme with translucent system bars, which allows application developers to fill the area behind the status and navigation bar with their app content. To enable a consistent developer experience in this configuration, it is important the status bar icon style is maintained across different device implementations.

If device implementations include a system status bar, they:

  • [C-2-1] MUST use white for system status icons (such as signal strength and battery level) and notifications issued by the system, unless the icon is indicating a problematic status or an app requests a light status bar using the SYSTEM_UI_FLAG_LIGHT_STATUS_BAR flag .
  • [C-2-2] Android device implementations MUST change the color of the system status icons to black (for details, refer to R.style ) when an app requests a light status bar.

3.8.7. Fonds d'écran animés

Android defines a component type and corresponding API and lifecycle that allows applications to expose one or more “Live Wallpapers” to the end user. Live wallpapers are animations, patterns, or similar images with limited input capabilities that display as a wallpaper, behind other applications.

Hardware is considered capable of reliably running live wallpapers if it can run all live wallpapers, with no limitations on functionality, at a reasonable frame rate with no adverse effects on other applications. Si des limitations matérielles entraînent le blocage, le dysfonctionnement des fonds d'écran et/ou des applications, une consommation excessive d'énergie du processeur ou de la batterie, ou une exécution à des fréquences d'images inacceptablement basses, le matériel est considéré comme incapable d'exécuter un fond d'écran animé. As an example, some live wallpapers may use an OpenGL 2.0 or 3.x context to render their content. Le fond d'écran animé ne fonctionnera pas de manière fiable sur du matériel qui ne prend pas en charge plusieurs contextes OpenGL, car l'utilisation du fond d'écran animé d'un contexte OpenGL peut entrer en conflit avec d'autres applications qui utilisent également un contexte OpenGL.

  • Les implémentations d'appareils capables d'exécuter des fonds d'écran animés de manière fiable, comme décrit ci-dessus, DEVRAIENT implémenter des fonds d'écran animés.

If device implementations implement live wallpapers, they:

  • [C-1-1] MUST report the platform feature flag android.software.live_wallpaper.

3.8.8. Activity Switching

The upstream Android source code includes the overview screen , a system-level user interface for task switching and displaying recently accessed activities and tasks using a thumbnail image of the application's graphical state at the moment the user last left the application.

Device implementations including the recents function navigation key as detailed in section 7.2.3 MAY alter the interface.

If device implementations including the recents function navigation key as detailed in section 7.2.3 alter the interface, they:

  • [C-1-1] MUST support at least up to 7 displayed activities.
  • SHOULD at least display the title of 4 activities at a time.
  • [C-1-2] MUST implement the screen pinning behavior and provide the user with a settings menu to toggle the feature.
  • SHOULD display highlight color, icon, screen title in recents.
  • SHOULD display a closing affordance ("x") but MAY delay this until user interacts with screens.
  • SHOULD implement a shortcut to switch easily to the previous activity.
  • SHOULD trigger the fast-switch action between the two most recently used apps, when the recents function key is tapped twice.
  • SHOULD trigger the split-screen multiwindow-mode, if supported, when the recents functions key is long pressed.
  • MAY display affiliated recents as a group that moves together.
  • [SR] Are STRONGLY RECOMMENDED to use the upstream Android user interface (or a similar thumbnail-based interface) for the overview screen.

3.8.9. Input Management

Android includes support for Input Management and support for third-party input method editors.

If device implementations allow users to use third-party input methods on the device, they:

  • [C-1-1] MUST declare the platform feature android.software.input_methods and support IME APIs as defined in the Android SDK documentation.
  • [C-1-2] MUST provide a user-accessible mechanism to add and configure third-party input methods in response to the android.settings.INPUT_METHOD_SETTINGS intent.

If device implementations declare the android.software.autofill feature flag, they:

3.8.10. Lock Screen Media Control

The Remote Control Client API is deprecated from Android 5.0 in favor of the Media Notification Template that allows media applications to integrate with playback controls that are displayed on the lock screen.

3.8.11. Screen savers (previously Dreams)

Android includes support for interactivescreensavers , previously referred to as Dreams. Screen savers allow users to interact with applications when a device connected to a power source is idle or docked in a desk dock. Android Watch devices MAY implement screen savers, but other types of device implementations SHOULD include support for screen savers and provide a settings option for users to configure screen savers in response to the android.settings.DREAM_SETTINGS intent.

3.8.12. Emplacement

If device implementations include a hardware sensor (eg GPS) that is capable of providing the location coordinates, they

3.8.13. Unicode and Font

Android includes support for the emoji characters defined in Unicode 10.0 .

If device implementations include a screen or video output, they:

  • [C-1-1] MUST be capable of rendering these emoji characters in color glyph.
  • [C-1-2] MUST include support for:
    • Roboto 2 font with different weights—sans-serif-thin, sans-serif-light, sans-serif-medium, sans-serif-black, sans-serif-condensed, sans-serif-condensed-light for the languages available on the appareil.
    • Full Unicode 7.0 coverage of Latin, Greek, and Cyrillic, including the Latin Extended A, B, C, and D ranges, and all glyphs in the currency symbols block of Unicode 7.0.
  • SHOULD support the skin tone and diverse family emojis as specified in the Unicode Technical Report #51 .

If device implementations include an IME, they:

  • SHOULD provide an input method to the user for these emoji characters.

3.8.14. Multi-windows

If device implementations have the capability to display multiple activities at the same time, they:

  • [C-1-1] MUST implement such multi-window mode(s) in accordance with the application behaviors and APIs described in the Android SDK multi-window mode support documentation and meet the following requirements:
  • [C-1-2] Applications can indicate whether they are capable of operating in multi-window mode in the AndroidManifest.xml file, either explicitly via setting the android:resizeableActivity attribute to true or implicitly by having the targetSdkVersion > 24. Apps that explicitly set this attribute to false in their manifest MUST NOT be launched in multi-window mode. Older apps with targetSdkVersion < 24 that did not set this android:resizeableActivity attribute MAY be launched in multi-window mode, but the system MUST provide warning that the app may not work as expected in multi-window mode.
  • [C-1-3] MUST NOT offer split-screen or freeform mode if the screen height < 440 dp and the screen width < 440 dp.
  • Device implementations with screen size xlarge SHOULD support freeform mode.

If device implementations support multi-window mode(s), and the split screen mode, they:

  • [C-2-1] MUST preload a resizeable launcher as the default.
  • [C-2-2] MUST crop the docked activity of a split-screen multi-window but SHOULD show some content of it, if the Launcher app is the focused window.
  • [C-2-3] MUST honor the declared AndroidManifestLayout_minWidth and AndroidManifestLayout_minHeight values of the third-party launcher application and not override these values in the course of showing some content of the docked activity.

If device implementations support multi-window mode(s) and picture-in-picture multi-window mode, they:

  • [C-3-1] MUST launch activities in picture-in-picture multi-window mode when the app is: * Targeting API level 26 or higher and declares android:supportsPictureInPicture * Targeting API level 25 or lower and declares both android:resizeableActivity and android:supportsPictureInPicture .
  • [C-3-2] MUST expose the actions in their SystemUI as specified by the current PIP activity through the setActions() API.
  • [C-3-3] MUST support aspect ratios greater than or equal to 1:2.39 and less than or equal to 2.39:1, as specified by the PIP activity through the setAspectRatio() API.
  • [C-3-4] MUST use KeyEvent.KEYCODE_WINDOW to control the PIP window; if PIP mode is not implemented, the key MUST be available to the foreground activity.
  • [C-3-5] MUST provide a user affordance to block an app from displaying in PIP mode; the AOSP implementation meets this requirement by having controls in the notification shade.
  • [C-3-6] MUST allocate minimum width and height of 108 dp for the PIP window and minimum width of 240 dp and height of 135 dp for the PIP window when the Configuration.uiMode is configured as UI_MODE_TYPE_TELEVISION .

3.8.15. Display Cutout

Android supports a Display Cutout as described in the SDK document. The DisplayCutout API defines an area on the edge of the display that is not functional for displaying content.

If device implementations include display cutout(s), they:

  • [C-1-1] MUST only have cutout(s) on the short edge(s) of the device. Conversely, if the device's aspect ratio is 1.0(1:1), they MUST NOT have cutout(s).
  • [C-1-2] MUST NOT have more than one cutout per edge.
  • [C-1-3] MUST honor the display cutout flags set by the app through the WindowManager.LayoutParams API as described in the SDK.
  • [C-1-4] MUST report correct values for all cutout metrics defined in the DisplayCutout API.

3.9. Device Administration

Android includes features that allow security-aware applications to perform device administration functions at the system level, such as enforcing password policies or performing remote wipe, through the Android Device Administration API .

If device implementations implement the full range of device administration policies defined in the Android SDK documentation, they:

  • [C-1-1] MUST declare android.software.device_admin .
  • [C-1-2] MUST support device owner provisioning as described in section 3.9.1 and section 3.9.1.1 .

3.9.1 Device Provisioning

3.9.1.1 Device owner provisioning

If device implementations declare android.software.device_admin , they:

  • [C-1-1] MUST support enrolling a Device Policy Client (DPC) as a Device Owner app as described below:
  • [C-1-2] MUST require some affirmative action during the provisioning process to consent to the app being set as Device Owner. Consent can be via user action or by some programmatic means during provisioning but it MUST NOT be hard coded or prevent the use of other Device Owner apps.

If device implementations declare android.software.device_admin , but also include a proprietary Device Owner management solution and provide a mechanism to promote an application configured in their solution as a "Device Owner equivalent" to the standard "Device Owner" as recognized by the standard Android DevicePolicyManager APIs, they:

  • [C-2-1] MUST have a process in place to verify that the specific app being promoted belongs to a legitimate enterprise device management solution and it has been already configured in the proprietary solution to have the rights equivalent as a "Device Owner" .
  • [C-2-2] MUST show the same AOSP Device Owner consent disclosure as the flow initiated by android.app.action.PROVISION_MANAGED_DEVICE prior to enrolling the DPC application as "Device Owner".
  • MAY have user data on the device prior to enrolling the DPC application as "Device Owner".
3.9.1.2 Managed profile provisioning

If device implementations declare android.software.managed_users , they:

  • [C-1-1] MUST implement the APIs allowing a Device Policy Controller (DPC) application to become the owner of a new Managed Profile .

  • [C-1-2] The managed profile provisioning process (the flow initiated by android.app.action.PROVISION_MANAGED_PROFILE ) users experience MUST align with the AOSP implementation.

  • [C-1-3] MUST provide the following user affordances within the Settings to indicate to the user when a particular system function has been disabled by the Device Policy Controller (DPC):

    • A consistent icon or other user affordance (for example the upstream AOSP info icon) to represent when a particular setting is restricted by a Device Admin.
    • A short explanation message, as provided by the Device Admin via the setShortSupportMessage .
    • The DPC application's icon.

3.9.2 Managed Profile Support

If device implementations declare android.software.managed_users , they:

  • [C-1-1] MUST support managed profiles via the android.app.admin.DevicePolicyManager APIs.
  • [C-1-2] MUST allow one and only one managed profile to be created .
  • [C-1-3] MUST use an icon badge (similar to the AOSP upstream work badge) to represent the managed applications and widgets and other badged UI elements like Recents & Notifications.
  • [C-1-4] MUST display a notification icon (similar to the AOSP upstream work badge) to indicate when user is within a managed profile application.
  • [C-1-5] MUST display a toast indicating that the user is in the managed profile if and when the device wakes up (ACTION_USER_PRESENT) and the foreground application is within the managed profile.
  • [C-1-6] Where a managed profile exists, MUST show a visual affordance in the Intent 'Chooser' to allow the user to forward the intent from the managed profile to the primary user or vice versa, if enabled by the Device Policy Manette.
  • [C-1-7] Where a managed profile exists, MUST expose the following user affordances for both the primary user and the managed profile:
    • Separate accounting for battery, location, mobile data and storage usage for the primary user and managed profile.
    • Independent management of VPN Applications installed within the primary user or managed profile.
    • Independent management of applications installed within the primary user or managed profile.
    • Independent management of accounts within the primary user or managed profile.
  • [C-1-8] MUST ensure the preinstalled dialer, contacts and messaging applications can search for and look up caller information from the managed profile (if one exists) alongside those from the primary profile, if the Device Policy Controller permits it.
  • [C-1-9] MUST ensure that it satisfies all the security requirements applicable for a device with multiple users enabled (see section 9.5 ), even though the managed profile is not counted as another user in addition to the primary user.
  • [C-1-10] MUST support the ability to specify a separate lock screen meeting the following requirements to grant access to apps running in a managed profile.
  • When contacts from the managed profile are displayed in the preinstalled call log, in-call UI, in-progress and missed-call notifications, contacts and messaging apps they SHOULD be badged with the same badge used to indicate managed profile applications.

3.9.3 Managed User Support

If device implementations declare android.software.managed_users , they:

  • [C-1-1] MUST provide a user affordance to logout from the current user and switch back to the primary user in multiple-user session when isLogoutEnabled returns true . The user affordance MUST be accessible from the lockscreen without unlocking the device.

3.10. Accessibilité

Android provides an accessibility layer that helps users with disabilities to navigate their devices more easily. In addition, Android provides platform APIs that enable accessibility service implementations to receive callbacks for user and system events and generate alternate feedback mechanisms, such as text-to-speech, haptic feedback, and trackball/d-pad navigation.

If device implementations support third-party accessibility services, they:

  • [C-1-1] MUST provide an implementation of the Android accessibility framework as described in the accessibility APIs SDK documentation.
  • [C-1-2] MUST generate accessibility events and deliver the appropriate AccessibilityEvent to all registered AccessibilityService implementations as documented in the SDK.
  • [C-1-3] MUST honor the android.settings.ACCESSIBILITY_SETTINGS intent to provide a user-accessible mechanism to enable and disable the third-party accessibility services alongside the preinstalled accessibility services.
  • [C-1-4] MUST add a button in the system's navigation bar allowing the user to control the accessibility service when the enabled accessibility services declare the AccessibilityServiceInfo.FLAG_REQUEST_ACCESSIBILITY_BUTTON . Note that for device implementations with no system navigation bar, this requirement is not applicable, but device implementations SHOULD provide a user affordance to control these accessibility services.

If device implementations include preinstalled accessibility services, they:

  • [C-2-1] MUST implement these preinstalled accessibility services as Direct Boot Aware apps when the data storage is encrypted with File Based Encryption (FBE).
  • SHOULD provide a mechanism in the out-of-box setup flow for users to enable relevant accessibility services, as well as options to adjust the font size, display size and magnification gestures.

3.11. Texte pour parler

Android includes APIs that allow applications to make use of text-to-speech (TTS) services and allows service providers to provide implementations of TTS services.

If device implementations reporting the feature android.hardware.audio.output, they:

If device implementations support installation of third-party TTS engines, they:

  • [C-2-1] MUST provide user affordance to allow the user to select a TTS engine for use at system level.

3.12. Cadre d'entrée TV

The Android Television Input Framework (TIF) simplifies the delivery of live content to Android Television devices. TIF provides a standard API to create input modules that control Android Television devices.

If device implementations support TIF, they:

  • [C-1-1] MUST declare the platform feature android.software.live_tv .
  • [C-1-2] MUST support all TIF APIs such that an application which uses these APIs and the third-party TIF-based inputs service can be installed and used on the device.

3.13. Réglages rapides

Android provides a Quick Settings UI component that allows quick access to frequently used or urgently needed actions.

If device implementations include a Quick Settings UI component, they:

  • [C-1-1] MUST allow the user to add or remove the tiles provided through the quicksettings APIs from a third-party app.
  • [C-1-2] MUST NOT automatically add a tile from a third-party app directly to the Quick Settings.
  • [C-1-3] MUST display all the user-added tiles from third-party apps alongside the system-provided quick setting tiles.

3.14. Media UI

If device implementations include the UI framework that supports third-party apps that depend on MediaBrowser and MediaSession , they:

3.15. Applications instantanées

Device implementations MUST satisfy the following requirements:

  • [C-0-1] Instant Apps MUST only be granted permissions that have the android:protectionLevel set to "instant" .
  • [C-0-2] Instant Apps MUST NOT interact with installed apps via implicit intents unless one of the following is true:
    • The component's intent pattern filter is exposed and has CATEGORY_BROWSABLE
    • The action is one of ACTION_SEND, ACTION_SENDTO, ACTION_SEND_MULTIPLE
    • The target is explicitly exposed with android:visibleToInstantApps
  • [C-0-3] Instant Apps MUST NOT interact explicitly with installed apps unless the component is exposed via android:visibleToInstantApps.
  • [C-0-4] IInstalled Apps MUST NOT see details about Instant Apps on the device unless the Instant App explicitly connects to the installed application.

3.16. Companion Device Pairing

Android includes support for companion device pairing to more effectively manage association with companion devices and provides the CompanionDeviceManager API for apps to access this feature.

If device implementations support the companion device pairing feature, they:

  • [C-1-1] MUST declare the feature flag FEATURE_COMPANION_DEVICE_SETUP .
  • [C-1-2] MUST ensure the APIs in the android.companion package is fully implemented.
  • [C-1-3] MUST provide user affordances for the user to select/confirm a companion device is present and operational.

3.17. Heavyweight Apps

If device implementations declare the feature FEATURE_CANT_SAVE_STATE , then they:

  • [C-1-1] MUST have only one installed app that specifies cantSaveState running in the system at a time. If the user leaves such an app without explicitly exiting it (for example by pressing home while leaving an active activity the system, instead of pressing back with no remaining active activities in the system), then device implementations MUST prioritize that app in RAM as they do for other things that are expected to remain running, such as foreground services. While such an app is in the background, the system can still apply power management features to it, such as limiting CPU and network access.
  • [C-1-2] MUST provide a UI affordance to chose the app that won't participate in the normal state save/restore mechanism once the user launches a second app declared with cantSaveState attribute.
  • [C-1-3] MUST NOT apply other changes in policy to apps that specify cantSaveState , such as changing CPU performance or changing scheduling prioritization.

If device implementations don't declare the feature FEATURE_CANT_SAVE_STATE , then they:

  • [C-1-1] MUST ignore the cantSaveState attribute set by apps and MUST NOT change the app behavior based on that attribute.

4. Compatibilité des emballages d'application

Devices implementations:

  • [C-0-1] MUST be capable of installing and running Android “.apk” files as generated by the “aapt” tool included in the official Android SDK .
  • As the above requirement may be challenging, device implementations are RECOMMENDED to use the AOSP reference implementation's package management system.

Implémentations d'appareils :

  • [C-0-2] MUST support verifying “.apk” files using the APK Signature Scheme v3 , APK Signature Scheme v2 and JAR signing .
  • [C-0-3] MUST NOT extend either the .apk , Android Manifest , Dalvik bytecode , or RenderScript bytecode formats in such a way that would prevent those files from installing and running correctly on other compatible devices.
  • [C-0-4] MUST NOT allow apps other than the current "installer of record" for the package to silently uninstall the app without any user confirmation, as documented in the SDK for the DELETE_PACKAGE permission. The only exceptions are the system package verifier app handling PACKAGE_NEEDS_VERIFICATION intent and the storage manager app handling ACTION_MANAGE_STORAGE intent.

  • [C-0-5] MUST have an activity that handles the android.settings.MANAGE_UNKNOWN_APP_SOURCES intent.

  • [C-0-6] MUST NOT install application packages from unknown sources, unless the app that requests the installation meets all the following requirements:

    • It MUST declare the REQUEST_INSTALL_PACKAGES permission or have the android:targetSdkVersion set at 24 or lower.
    • It MUST have been granted permission by the user to install apps from unknown sources.
  • SHOULD provide a user affordance to grant/revoke the permission to install apps from unknown sources per application, but MAY choose to implement this as a no-op and return RESULT_CANCELED for startActivityForResult() , if the device implementation does not want to allow users to have this choice. However, even in such cases, they SHOULD indicate to the user why there is no such choice presented.

  • [C-0-7] MUST display a warning dialog with the warning string that is provided through the system API PackageManager.setHarmfulAppWarning to the user before launching an activity in an application that has been marked by the same system API PackageManager.setHarmfulAppWarning as potentially nocif.

  • SHOULD provide a user affordance to choose to uninstall or launch an application on the warning dialog.

5. Compatibilité multimédia

Implémentations d'appareils :

  • [C-0-1] MUST support the media formats, encoders, decoders, file types, and container formats defined in section 5.1 for each and every codec declared by MediaCodecList .
  • [C-0-2] MUST declare and report support of the encoders, decoders available to third-party applications via MediaCodecList .
  • [C-0-3] MUST be able to decode and make available to third-party apps all the formats it can encode. This includes all bitstreams that its encoders generate and the profiles reported in its CamcorderProfile .

Implémentations d'appareils :

  • SHOULD aim for minimum codec latency, in others words, they
    • SHOULD NOT consume and store input buffers and return input buffers only once processed.
    • SHOULD NOT hold onto decoded buffers for longer than as specified by the standard (eg SPS).
    • SHOULD NOT hold onto encoded buffers longer than required by the GOP structure.

All of the codecs listed in the section below are provided as software implementations in the preferred Android implementation from the Android Open Source Project.

Please note that neither Google nor the Open Handset Alliance make any representation that these codecs are free from third-party patents. Ceux qui ont l'intention d'utiliser ce code source dans des produits matériels ou logiciels sont informés que les implémentations de ce code, y compris dans des logiciels open source ou des sharewares, peuvent nécessiter des licences de brevet auprès des titulaires de brevets concernés.

5.1. Codecs multimédias

5.1.1. Audio Encoding

See more details in 5.1.3. Audio Codecs Details .

If device implementations declare android.hardware.microphone , they MUST support the following audio encoding:

  • [C-1-1] PCM/WAVE

5.1.2. Audio Decoding

See more details in 5.1.3. Audio Codecs Details .

If device implementations declare support for the android.hardware.audio.output feature, they must support decoding the following audio formats:

  • [C-1-1] MPEG-4 AAC Profile (AAC LC)
  • [C-1-2] MPEG-4 HE AAC Profile (AAC+)
  • [C-1-3] MPEG-4 HE AACv2 Profile (enhanced AAC+)
  • [C-1-4] AAC ELD (enhanced low delay AAC)
  • [C-1-11] xHE-AAC (ISO/IEC 23003-3 Extended HE AAC Profile, which includes the USAC Baseline Profile, and ISO/IEC 23003-4 Dynamic Range Control Profile)
  • [C-1-5] FLAC
  • [C-1-6] MP3
  • [C-1-7] MIDI
  • [C-1-8] Vorbis
  • [C-1-9] PCM/WAVE
  • [C-1-10] Opus

If device implementations support the decoding of AAC input buffers of multichannel streams (ie more than two channels) to PCM through the default AAC audio decoder in the android.media.MediaCodec API, the following MUST be supported:

  • [C-2-1] Decoding MUST be performed without downmixing (eg a 5.0 AAC stream must be decoded to five channels of PCM, a 5.1 AAC stream must be decoded to six channels of PCM).
  • [C-2-2] Dynamic range metadata MUST be as defined in "Dynamic Range Control (DRC)" in ISO/IEC 14496-3, and the android.media.MediaFormat DRC keys to configure the dynamic range-related behaviors of the audio decoder. The AAC DRC keys were introduced in API 21,and are: KEY_AAC_DRC_ATTENUATION_FACTOR , KEY_AAC_DRC_BOOST_FACTOR , KEY_AAC_DRC_HEAVY_COMPRESSION , KEY_AAC_DRC_TARGET_REFERENCE_LEVEL and KEY_AAC_ENCODED_TARGET_LEVEL .

When decoding USAC audio, MPEG-D (ISO/IEC 23003-4):

  • [C-3-1] Loudness and DRC metadata MUST be interpreted and applied according to MPEG-D DRC Dynamic Range Control Profile Level 1.
  • [C-3-2] The decoder MUST behave according to the configuration set with the following android.media.MediaFormat keys: KEY_AAC_DRC_TARGET_REFERENCE_LEVEL and KEY_AAC_DRC_EFFECT_TYPE .

MPEG-4 AAC, HE AAC, and HE AACv2 profile decoders:

  • MAY support loudness and dynamic range control using ISO/IEC 23003-4 Dynamic Range Control Profile.

If ISO/IEC 23003-4 is supported and if both ISO/IEC 23003-4 and ISO/IEC 14496-3 metadata are present in a decoded bitstream, then:

  • ISO/IEC 23003-4 metadata SHALL take precedence.

5.1.3. Audio Codecs Details

Format/Codec Détails Supported File Types/Container Formats
MPEG-4 AAC Profile
(AAC LC)
Support for mono/stereo/5.0/5.1 content with standard sampling rates from 8 to 48 kHz.
  • 3GPP (.3gp)
  • MPEG-4 (.mp4, .m4a)
  • ADTS raw AAC (.aac, ADIF not supported)
  • MPEG-TS (.ts, not seekable)
MPEG-4 HE AAC Profile (AAC+) Support for mono/stereo/5.0/5.1 content with standard sampling rates from 16 to 48 kHz.
MPEG-4 HE AACv2
Profile (enhanced AAC+)
Support for mono/stereo/5.0/5.1 content with standard sampling rates from 16 to 48 kHz.
AAC ELD (enhanced low delay AAC) Support for mono/stereo content with standard sampling rates from 16 to 48 kHz.
USAC Support for mono/stereo content with standard sampling rates from 7.35 to 48 kHz. MPEG-4 (.mp4, .m4a)
AMR-NB 4.75 to 12.2 kbps sampled @ 8 kHz 3GPP (.3gp)
AMR-WB 9 rates from 6.60 kbit/s to 23.85 kbit/s sampled @ 16 kHz
FLAC Mono / stéréo (pas de multicanal). Sample rates up to 48 kHz (but up to 44.1 kHz is RECOMMENDED on devices with 44.1 kHz output, as the 48 to 44.1 kHz downsampler does not include a low-pass filter). 16-bit RECOMMENDED; Aucun tronçon appliqué pour 24 bits. Flac (.flac) seulement
MP3 Mono/Stereo 8-320Kbps constant (CBR) or variable bitrate (VBR) Mp3 (.mp3)
MIDI MIDI TYPE 0 et 1. DLS Version 1 et 2. XMF et Mobile XMF. Prise en charge des formats de sonnerie RTTTL / RTX, OTA et IMELODY
  • Type 0 et 1 (.mid, .xmf, .mxmf)
  • Rtttl / rtx (.rtttl, .rtx)
  • OTA (.ota)
  • imelody (.imy)
Vorbis
  • Ogg (.ogg)
  • Matroska (.mkv, Android 4.0+)
PCM / WAVE 16-bit linear PCM (rates up to limit of hardware). Devices MUST support sampling rates for raw PCM recording at 8000, 11025, 16000, and 44100 Hz frequencies. Vague (.wav)
Opus Matroska (.mkv), Ogg(.ogg)

5.1.4. Image Encoding

See more details in 5.1.6. Image Codecs Details .

Device implementations MUST support encoding the following image encoding:

  • [C-0-1] JPEG
  • [C-0-2] PNG
  • [C-0-3] WebP

5.1.5. Image Decoding

See more details in 5.1.6. Image Codecs Details .

Device implementations MUST support decoding the following image encoding:

  • [C-0-1] JPEG
  • [C-0-2] GIF
  • [C-0-3] PNG
  • [C-0-4] BMP
  • [C-0-5] WebP
  • [C-0-6] Raw
  • [C-0-7] HEIF (HEIC)

5.1.6. Image Codecs Details

Format/Codec Détails Supported File Types/Container Formats
JPEG Base + progressive Jpeg (.jpg)
GIF Gif (.gif)
PNG Png (.png)
PGB BMP (.bmp)
WebP Webp (.webp)
Brut ARW (.arw), CR2 (.cr2), DNG (.dng), NEF (.nef), NRW (.nrw), ORF (.orf), PEF (.pef), RAF (.raf), RW2 (.rw2), SRW (.srw)
HEIF Image, Image collection, Image sequence HEIF (.heif), HEIC (.heic)

5.1.7. Codecs vidéo

  • For acceptable quality of web video streaming and video-conference services, device implementations SHOULD use a hardware VP8 codec that meets the requirements .

If device implementations include a video decoder or encoder:

  • [C-1-1] Video codecs MUST support output and input bytebuffer sizes that accommodate the largest feasible compressed and uncompressed frame as dictated by the standard and configuration but also not overallocate.

  • [C-1-2] Video encoders and decoders MUST support YUV420 flexible color format (COLOR_FormatYUV420Flexible).

If device implementations advertise HDR profile support through Display.HdrCapabilities , they:

  • [C-2-1] MUST support HDR static metadata parsing and handling.

If device implementations advertise intra refresh support through FEATURE_IntraRefresh in the MediaCodecInfo.CodecCapabilities class, they:

  • [C-3-1] MUST support the refresh periods in the range of 10 - 60 frames and accurately operate within 20% of configured refresh period.

5.1.8. Video Codecs List

Format/Codec Détails Supported File Types/
Container Formats
H.263
  • 3GPP (.3gp)
  • MPEG-4 (.mp4)
H.264 AVC See section 5.2 and 5.3 for details
  • 3GPP (.3gp)
  • MPEG-4 (.mp4)
  • MPEG-2 TS (.ts, AAC audio only, not seekable, Android 3.0+)
H.265 HEVC See section 5.3 for details MPEG-4 (.mp4)
MPEG-2 Profil principal MPEG2-TS
MPEG-4 SP 3GPP (.3gp)
VP8 See section 5.2 and 5.3 for details
VP9 See section 5.3 for details

5.2. Encodage vidéo

If device implementations support any video encoder and make it available to third-party apps, they:

  • SHOULD NOT be, over two sliding windows, more than ~15% over the bitrate between intraframe (I-frame) intervals.
  • SHOULD NOT be more than ~100% over the bitrate over a sliding window of 1 second.

If device implementations include an embedded screen display with the diagonal length of at least 2.5 inches or include a video output port or declare the support of a camera via the android.hardware.camera.any feature flag, they:

  • [C-1-1] MUST include the support of at least one of the VP8 or H.264 video encoders, and make it available for third-party applications.
  • SHOULD support both VP8 and H.264 video encoders, and make it available for third-party applications.

If device implementations support any of the H.264, VP8, VP9 or HEVC video encoders and make it available to third-party applications, they:

  • [C-2-1] MUST support dynamically configurable bitrates.
  • SHOULD support variable frame rates, where video encoder SHOULD determine instantaneous frame duration based on the timestamps of input buffers, and allocate its bit bucket based on that frame duration.

If device implementations support the MPEG-4 SP video encoder and make it available to third-party apps, they:

  • SHOULD support dynamically configurable bitrates for the supported encoder.

5.2.1. H.263

If device implementations support H.263 encoders and make it available to third-party apps, they:

  • [C-1-1] MUST support Baseline Profile Level 45.
  • SHOULD support dynamically configurable bitrates for the supported encoder.

5.2.2. H-264

If device implementations support H.264 codec, they:

  • [C-1-1] MUST support Baseline Profile Level 3. However, support for ASO (Arbitrary Slice Ordering), FMO (Flexible Macroblock Ordering) and RS (Redundant Slices) is OPTIONAL. Moreover, to maintain compatibility with other Android devices, it is RECOMMENDED that ASO, FMO and RS are not used for Baseline Profile by encoders.
  • [C-1-2] MUST support the SD (Standard Definition) video encoding profiles in the following table.
  • SHOULD support Main Profile Level 4.
  • SHOULD support the HD (High Definition) video encoding profiles as indicated in the following table.

If device implementations report support of H.264 encoding for 720p or 1080p resolution videos through the media APIs, they:

  • [C-2-1] MUST support the encoding profiles in the following table.
SD (basse qualité) SD (haute qualité) HD 720p HD 1080p
Résolution vidéo 320 x 240 px 720 x 480 px 1280 x 720 pixels 1920 x 1080 pixels
Frame rate vidéo 20 fps 30 images par seconde 30 images par seconde 30 images par seconde
Bitrate vidéo 384 Kbps 2 Mbps 4 Mbit/s 10 Mbit/s

5.2.3. VP8

If device implementations support VP8 codec, they:

  • [C-1-1] MUST support the SD video encoding profiles.
  • SHOULD support the following HD (High Definition) video encoding profiles.
  • SHOULD support writing Matroska WebM files.
  • SHOULD use a hardware VP8 codec that meets the WebM project RTC hardware coding requirements , to ensure acceptable quality of web video streaming and video-conference services.

If device implementations report support of VP8 encoding for 720p or 1080p resolution videos through the media APIs, they:

  • [C-2-1] MUST support the encoding profiles in the following table.
SD (basse qualité) SD (haute qualité) HD 720p HD 1080p
Résolution vidéo 320 x 180 px 640 x 360 px 1280 x 720 pixels 1920 x 1080 pixels
Frame rate vidéo 30 images par seconde 30 images par seconde 30 images par seconde 30 images par seconde
Bitrate vidéo 800 Kbps 2 Mbps 4 Mbit/s 10 Mbit/s

5.2.4. VP9

If device implementations support VP9 codec, they:

  • SHOULD support writing Matroska WebM files.

5.3. Video Decoding

If device implementations support VP8, VP9, H.264, or H.265 codecs, they:

  • [C-1-1] MUST support dynamic video resolution and frame rate switching through the standard Android APIs within the same stream for all VP8, VP9, H.264, and H.265 codecs in real time and up to the maximum resolution supported by each codec on the device.

If device implementations declare support for the Dolby Vision decoder through HDR_TYPE_DOLBY_VISION , they:

  • [C-2-1] MUST provide a Dolby Vision-capable extractor.
  • [C-2-2] MUST properly display Dolby Vision content on the device screen or on a standard video output port (eg, HDMI).
  • [C-2-3] MUST set the track index of backward-compatible base-layer(s) (if present) to be the same as the combined Dolby Vision layer's track index.

5.3.1. MPEG-2

If device implementations support MPEG-2 decoders, they:

  • [C-1-1] MUST support the Main Profile High Level.

5.3.2. H.263

If device implementations support H.263 decoders, they:

  • [C-1-1] MUST support Baseline Profile Level 30 and Level 45.

5.3.3. MPEG-4

If device implementations with MPEG-4 decoders, they:

  • [C-1-1] MUST support Simple Profile Level 3.

5.3.4. H.264

If device implementations support H.264 decoders, they:

  • [C-1-1] MUST support Main Profile Level 3.1 and Baseline Profile. Support for ASO (Arbitrary Slice Ordering), FMO (Flexible Macroblock Ordering) and RS (Redundant Slices) is OPTIONAL.
  • [C-1-2] MUST be capable of decoding videos with the SD (Standard Definition) profiles listed in the following table and encoded with the Baseline Profile and Main Profile Level 3.1 (including 720p30).
  • SHOULD be capable of decoding videos with the HD (High Definition) profiles as indicated in the following table.

If the height that is reported by the Display.getSupportedModes() method is equal or greater than the video resolution, device implementations:

  • [C-2-1] MUST support the HD 720p video decoding profiles in the following table.
  • [C-2-2] MUST support the HD 1080p video decoding profiles in the following table.
SD (basse qualité) SD (haute qualité) HD 720p HD 1080p
Résolution vidéo 320 x 240 px 720 x 480 px 1280 x 720 pixels 1920 x 1080 pixels
Frame rate vidéo 30 images par seconde 30 images par seconde 60 images par seconde 30 fps (60 fps Television )
Bitrate vidéo 800 Kbps 2 Mbps 8 Mbps 20 Mbit/s

5.3.5. H.265 (HEVC)

If device implementations support H.265 codec, they:

  • [C-1-1] MUST support the Main Profile Level 3 Main tier and the SD video decoding profiles as indicated in the following table.
  • SHOULD support the HD decoding profiles as indicated in the following table.
  • [C-1-2] MUST support the HD decoding profiles as indicated in the following table if there is a hardware decoder.

If the height that is reported by the Display.getSupportedModes() method is equal to or greater than the video resolution, then:

  • [C-2-1] Device implementations MUST support at least one of H.265 or VP9 decoding of 720, 1080 and UHD profiles.
SD (basse qualité) SD (haute qualité) HD 720p HD 1080p UHD
Résolution vidéo 352 x 288 px 720 x 480 px 1280 x 720 pixels 1920 x 1080 pixels 3840 x 2160 pixels
Frame rate vidéo 30 images par seconde 30 images par seconde 30 images par seconde 30/60 fps (60 fps Television with H.265 hardware decoding ) 60 images par seconde
Bitrate vidéo 600 Kbps 1.6 Mbps 4 Mbit/s 5 Mbps 20 Mbit/s

5.3.6. VP8

If device implementations support VP8 codec, they:

  • [C-1-1] MUST support the SD decoding profiles in the following table.
  • SHOULD use a hardware VP8 codec that meets the requirements .
  • SHOULD support the HD decoding profiles in the following table.

If the height as reported by the Display.getSupportedModes() method is equal or greater than the video resolution, then:

  • [C-2-1] Device implementations MUST support 720p profiles in the following table.
  • [C-2-2] Device implementations MUST support 1080p profiles in the following table.
SD (basse qualité) SD (haute qualité) HD 720p HD 1080p
Résolution vidéo 320 x 180 px 640 x 360 px 1280 x 720 pixels 1920 x 1080 pixels
Frame rate vidéo 30 images par seconde 30 images par seconde 30 fps (60 fps Television ) 30 (60 fps Television )
Bitrate vidéo 800 Kbps 2 Mbps 8 Mbps 20 Mbit/s

5.3.7. VP9

If device implementations support VP9 codec, they:

  • [C-1-1] MUST support the SD video decoding profiles as indicated in the following table.
  • SHOULD support the HD decoding profiles as indicated in the following table.

If device implementations support VP9 codec and a hardware decoder:

  • [C-2-1] MUST support the HD decoding profiles as indicated in the following table.

If the height that is reported by the Display.getSupportedModes() method is equal to or greater than the video resolution, then:

  • [C-3-1] Device implementations MUST support at least one of VP9 or H.265 decoding of the 720, 1080 and UHD profiles.
SD (basse qualité) SD (haute qualité) HD 720p HD 1080p UHD
Résolution vidéo 320 x 180 px 640 x 360 px 1280 x 720 pixels 1920 x 1080 pixels 3840 x 2160 pixels
Frame rate vidéo 30 images par seconde 30 images par seconde 30 images par seconde 30 fps (60 fps Television with VP9 hardware decoding ) 60 images par seconde
Bitrate vidéo 600 Kbps 1.6 Mbps 4 Mbit/s 5 Mbps 20 Mbit/s

5.4. Enregistrement audio

While some of the requirements outlined in this section are listed as SHOULD since Android 4.3, the Compatibility Definition for future versions are planned to change these to MUST. Existing and new Android devices are STRONGLY RECOMMENDED to meet these requirements that are listed as SHOULD, or they will not be able to attain Android compatibility when upgraded to the future version.

5.4.1. Raw Audio Capture

If device implementations declare android.hardware.microphone , they:

  • [C-1-1] MUST allow capture of raw audio content with the following characteristics:

    • Format : Linear PCM, 16-bit
    • Sampling rates : 8000, 11025, 16000, 44100 Hz
    • Channels : Mono
  • [C-1-2] MUST capture at above sample rates without up-sampling.

  • [C-1-3] MUST include an appropriate anti-aliasing filter when the sample rates given above are captured with down-sampling.
  • SHOULD allow AM radio and DVD quality capture of raw audio content, which means the following characteristics:

    • Format : Linear PCM, 16-bit
    • Sampling rates : 22050, 48000 Hz
    • Channels : Stereo

If device implementations allow AM radio and DVD quality capture of raw audio content, they:

  • [C-2-1] MUST capture without up-sampling at any ratio higher than 16000:22050 or 44100:48000.
  • [C-2-2] MUST include an appropriate anti-aliasing filter for any up-sampling or down-sampling.

5.4.2. Capture for Voice Recognition

If device implementations declare android.hardware.microphone , they:

  • [C-1-1] MUST capture android.media.MediaRecorder.AudioSource.VOICE_RECOGNITION audio source at one of the sampling rates, 44100 and 48000.
  • [C-1-2] MUST, by default, disable any noise reduction audio processing when recording an audio stream from the AudioSource.VOICE_RECOGNITION audio source.
  • [C-1-3] MUST, by default, disable any automatic gain control when recording an audio stream from the AudioSource.VOICE_RECOGNITION audio source.
  • SHOULD record the voice recognition audio stream with approximately flat amplitude versus frequency characteristics: specifically, ±3 dB, from 100 Hz to 4000 Hz.
  • SHOULD record the voice recognition audio stream with input sensitivity set such that a 90 dB sound power level (SPL) source at 1000 Hz yields RMS of 2500 for 16-bit samples.
  • SHOULD record the voice recognition audio stream so that the PCM amplitude levels linearly track input SPL changes over at least a 30 dB range from -18 dB to +12 dB re 90 dB SPL at the microphone.
  • SHOULD record the voice recognition audio stream with total harmonic distortion (THD) less than 1% for 1 kHz at 90 dB SPL input level at the microphone.

If device implementations declare android.hardware.microphone and noise suppression (reduction) technologies tuned for speech recognition, they:

  • [C-2-1] MUST allow this audio affect to be controllable with the android.media.audiofx.NoiseSuppressor API.
  • [C-2-2] MUST uniquely identify each noise suppression technology implementation via the AudioEffect.Descriptor.uuid field.

5.4.3. Capture for Rerouting of Playback

The android.media.MediaRecorder.AudioSource class includes the REMOTE_SUBMIX audio source.

If device implementations declare both android.hardware.audio.output and android.hardware.microphone , they:

  • [C-1-1] MUST properly implement the REMOTE_SUBMIX audio source so that when an application uses the android.media.AudioRecord API to record from this audio source, it captures a mix of all audio streams except for the following:

    • AudioManager.STREAM_RING
    • AudioManager.STREAM_ALARM
    • AudioManager.STREAM_NOTIFICATION

5.5. Audio Playback

Android includes the support to allow apps to playback audio through the audio output peripheral as defined in section 7.8.2.

5.5.1. Raw Audio Playback

If device implementations declare android.hardware.audio.output , they:

  • [C-1-1] MUST allow playback of raw audio content with the following characteristics:

    • Format : Linear PCM, 16-bit, 8-bit, float
    • Channels : Mono, Stereo, valid multichannel configurations with up to 8 channels
    • Sampling rates (in Hz) :
      • 8000, 11025, 16000, 22050, 32000, 44100, 48000 at the channel configurations listed above
      • 96000 in mono and stereo
  • SHOULD allow playback of raw audio content with the following characteristics:

    • Sampling rates : 24000, 48000

5.5.2. Audio Effects

Android provides an API for audio effects for device implementations.

If device implementations declare the feature android.hardware.audio.output , they:

  • [C-1-1] MUST support the EFFECT_TYPE_EQUALIZER and EFFECT_TYPE_LOUDNESS_ENHANCER implementations controllable through the AudioEffect subclasses Equalizer , LoudnessEnhancer .
  • [C-1-2] MUST support the visualizer API implementation, controllable through the Visualizer class.
  • [C-1-3] MUST support the EFFECT_TYPE_DYNAMICS_PROCESSING implementation controllable through the AudioEffect subclass DynamicsProcessing .
  • SHOULD support the EFFECT_TYPE_BASS_BOOST , EFFECT_TYPE_ENV_REVERB , EFFECT_TYPE_PRESET_REVERB , and EFFECT_TYPE_VIRTUALIZER implementations controllable through the AudioEffect sub-classes BassBoost , EnvironmentalReverb , PresetReverb , and Virtualizer .

5.5.3. Audio Output Volume

Automotive device implementations:

  • SHOULD allow adjusting audio volume separately per each audio stream using the content type or usage as defined by AudioAttributes and car audio usage as publicly defined in android.car.CarAudioManager .

5.6. Latence audio

Audio latency is the time delay as an audio signal passes through a system. Many classes of applications rely on short latencies, to achieve real-time sound effects.

For the purposes of this section, use the following definitions:

  • output latency . The interval between when an application writes a frame of PCM-coded data and when the corresponding sound is presented to environment at an on-device transducer or signal leaves the device via a port and can be observed externally.
  • cold output latency . The output latency for the first frame, when the audio output system has been idle and powered down prior to the request.
  • continuous output latency . The output latency for subsequent frames, after the device is playing audio.
  • input latency . The interval between when a sound is presented by environment to device at an on-device transducer or signal enters the device via a port and when an application reads the corresponding frame of PCM-coded data.
  • lost input . The initial portion of an input signal that is unusable or unavailable.
  • cold input latency . The sum of lost input time and the input latency for the first frame, when the audio input system has been idle and powered down prior to the request.
  • continuous input latency . The input latency for subsequent frames, while the device is capturing audio.
  • cold output jitter . The variability among separate measurements of cold output latency values.
  • cold input jitter . The variability among separate measurements of cold input latency values.
  • continuous round-trip latency . The sum of continuous input latency plus continuous output latency plus one buffer period. The buffer period allows time for the app to process the signal and time for the app to mitigate phase difference between input and output streams.
  • OpenSL ES PCM buffer queue API . The set of PCM-related OpenSL ES APIs within Android NDK .
  • AAudio native audio API . The set of AAudio APIs within Android NDK .
  • Timestamp . A pair consisting of a relative frame position within a stream and the estimated time when that frame enters or leaves the audio processing pipeline on the associated endpoint. See also AudioTimestamp .

If device implementations declare android.hardware.audio.output they are STRONGLY RECOMMENDED to meet or exceed the following requirements:

  • [C-SR] Cold output latency of 100 milliseconds or less
  • [C-SR] Continuous output latency of 45 milliseconds or less
  • [C-SR] Minimize the cold output jitter
  • [C-SR] The output timestamp returned by AudioTrack.getTimestamp and AAudioStream_getTimestamp is accurate to +/- 1 ms.

If device implementations meet the above requirements, after any initial calibration, when using both the OpenSL ES PCM buffer queue and AAudio native audio APIs, for continuous output latency and cold output latency over at least one supported audio output device, they are:

If device implementations do not meet the requirements for low-latency audio via both the OpenSL ES PCM buffer queue and AAudio native audio APIs, they:

  • [C-1-1] MUST NOT report support for low-latency audio.

If device implementations include android.hardware.microphone , they are STRONGLY RECOMMENDED to meet these input audio requirements:

  • [C-SR] Cold input latency of 100 milliseconds or less.
  • [C-SR] Continuous input latency of 30 milliseconds or less.
  • [C-SR] Continuous round-trip latency of 50 milliseconds or less.
  • [C-SR] Minimize the cold input jitter.
  • [C-SR] Limit the error in input timestamps, as returned by AudioRecord.getTimestamp or AAudioStream_getTimestamp , to +/- 1 ms.

5.7. Protocoles réseau

Device implementations MUST support the media network protocols for audio and video playback as specified in the Android SDK documentation.

If device implementations include an audio or a video decoder, they:

  • [C-1-1] MUST support all required codecs and container formats in section 5.1 over HTTP(S).

  • [C-1-2] MUST support the media segment formats shown in the Media Segment Formats table below over HTTP Live Streaming draft protocol, Version 7 .

  • [C-1-3] MUST support the following RTP audio video profile and related codecs in the RTSP table below. For exceptions please see the table footnotes in section 5.1 .

Media Segment Formats

Segment formats Les références) Required codec support
MPEG-2 Transport Stream ISO 13818 Video codecs:
  • H264 AVC
  • MPEG-4 SP
  • MPEG-2
See section 5.1.3 for details on H264 AVC, MPEG2-4 SP,
and MPEG-2.

Audio codecs:

  • CAA
See section 5.1.1 for details on AAC and its variants.
AAC with ADTS framing and ID3 tags ISO 13818-7 See section 5.1.1 for details on AAC and its variants
WebVTT WebVTT

RTSP (RTP, SDP)

Nom de profil Les références) Required codec support
H264 AVC RFC 6184 See section 5.1.3 for details on H264 AVC
MP4A-LATM RFC 6416 See section 5.1.1 for details on AAC and its variants
H263-1998 RFC 3551
RFC 4629
RFC 2190
See section 5.1.3 for details on H263
H263-2000 RFC 4629 See section 5.1.3 for details on H263
RAM RFC 4867 See section 5.1.1 for details on AMR-NB
AMR-WB RFC 4867 See section 5.1.1 for details on AMR-WB
MP4V-ES RFC 6416 See section 5.1.3 for details on MPEG-4 SP
mpeg4-generic RFC 3640 See section 5.1.1 for details on AAC and its variants
MP2T RFC 2250 See MPEG-2 Transport Stream underneath HTTP Live Streaming for details

5.8. Secure Media

If device implementations support secure video output and are capable of supporting secure surfaces, they:

  • [C-1-1] MUST declare support for Display.FLAG_SECURE .

If device implementations declare support for Display.FLAG_SECURE and support wireless display protocol, they:

  • [C-2-1] MUST secure the link with a cryptographically strong mechanism such as HDCP 2.x or higher for the displays connected through wireless protocols such as Miracast.

If device implementations declare support for Display.FLAG_SECURE and support wired external display, they:

  • [C-3-1] MUST support HDCP 1.2 or higher for all external displays connected via a user-accessible wired port.

5.9. Musical Instrument Digital Interface (MIDI)

If device implementations report support for feature android.software.midi via the android.content.pm.PackageManager class, they:

  • [C-1-1] MUST support MIDI over all MIDI-capable hardware transports for which they provide generic non-MIDI connectivity, where such transports are:

  • [C-1-2] MUST support the inter-app MIDI software transport (virtual MIDI devices)

5.10. Audio professionnel

If device implementations report support for feature android.hardware.audio.pro via the android.content.pm.PackageManager class, they:

  • [C-1-1] MUST report support for feature android.hardware.audio.low_latency .
  • [C-1-2] MUST have the continuous round-trip audio latency, as defined in section 5.6 Audio Latency , MUST be 20 milliseconds or less and SHOULD be 10 milliseconds or less over at least one supported path.
  • [C-1-3] MUST include a USB port(s) supporting USB host mode and USB peripheral mode.
  • [C-1-4] MUST report support for feature android.software.midi .
  • [C-1-5] MUST meet latencies and USB audio requirements using both the OpenSL ES PCM buffer queue and AAudio native audio APIs.
  • [SR] Are STRONGLY RECOMMENDED to provide a consistent level of CPU performance while audio is active and CPU load is varying. This should be tested using SimpleSynth commit 1bd6391 . The SimpleSynth app needs to be run with below parameters and achieve zero underruns after 10 minutes:
    • Work cycles: 200,000
    • Variable load: ON (this will switch between 100% and 10% of the work cycles value every 2 seconds and is designed to test CPU governor behavior)
    • Stabilized load: OFF
  • SHOULD minimize audio clock inaccuracy and drift relative to standard time.
  • SHOULD minimize audio clock drift relative to the CPU CLOCK_MONOTONIC when both are active.
  • SHOULD minimize audio latency over on-device transducers.
  • SHOULD minimize audio latency over USB digital audio.
  • SHOULD document audio latency measurements over all paths.
  • SHOULD minimize jitter in audio buffer completion callback entry times, as this affects usable percentage of full CPU bandwidth by the callback.
  • SHOULD provide zero audio underruns (output) or overruns (input) under normal use at reported latency.
  • SHOULD provide zero inter-channel latency difference.
  • SHOULD minimize MIDI mean latency over all transports.
  • SHOULD minimize MIDI latency variability under load (jitter) over all transports.
  • SHOULD provide accurate MIDI timestamps over all transports.
  • SHOULD minimize audio signal noise over on-device transducers, including the period immediately after cold start.
  • SHOULD provide zero audio clock difference between the input and output sides of corresponding end-points, when both are active. Examples of corresponding end-points include the on-device microphone and speaker, or the audio jack input and output.
  • SHOULD handle audio buffer completion callbacks for the input and output sides of corresponding end-points on the same thread when both are active, and enter the output callback immediately after the return from the input callback. Or if it is not feasible to handle the callbacks on the same thread, then enter the output callback shortly after entering the input callback to permit the application to have a consistent timing of the input and output sides.
  • SHOULD minimize the phase difference between HAL audio buffering for the input and output sides of corresponding end-points.
  • SHOULD minimize touch latency.
  • SHOULD minimize touch latency variability under load (jitter).
  • SHOULD have a latency from touch input to audio output of less than or equal to 40 ms.

If device implementations meet all of the above requirements, they:

If device implementations include a 4 conductor 3.5mm audio jack, they:

If device implementations omit a 4 conductor 3.5mm audio jack and include a USB port(s) supporting USB host mode, they:

  • [C-3-1] MUST implement the USB audio class.
  • [C-3-2] MUST have a continuous round-trip audio latency of 20 milliseconds or less over the USB host mode port using USB audio class.
  • The continuous round-trip audio latency SHOULD be 10 milliseconds or less over the USB host mode port using USB audio class.

If device implementations include an HDMI port, they:

  • [C-4-1] MUST support output in stereo and eight channels at 20-bit or 24-bit depth and 192 kHz without bit-depth loss or resampling, in at least one configuration.

5.11. Capture for Unprocessed

Android includes support for recording of unprocessed audio via the android.media.MediaRecorder.AudioSource.UNPROCESSED audio source. In OpenSL ES, it can be accessed with the record preset SL_ANDROID_RECORDING_PRESET_UNPROCESSED .

If device implementations intent to support unprocessed audio source and make it available to third-party apps, they:

  • [C-1-1] MUST report the support through the android.media.AudioManager property PROPERTY_SUPPORT_AUDIO_SOURCE_UNPROCESSED .

  • [C-1-2] MUST exhibit approximately flat amplitude-versus-frequency characteristics in the mid-frequency range: specifically ±10dB from 100 Hz to 7000 Hz for each and every microphone used to record the unprocessed audio source.

  • [C-1-3] MUST exhibit amplitude levels in the low frequency range: specifically from ±20 dB from 5 Hz to 100 Hz compared to the mid-frequency range for each and every microphone used to record the unprocessed audio source.

  • [C-1-4] MUST exhibit amplitude levels in the high frequency range: specifically from ±30 dB from 7000 Hz to 22 KHz compared to the mid-frequency range for each and every microphone used to record the unprocessed audio source.

  • [C-1-5] MUST set audio input sensitivity such that a 1000 Hz sinusoidal tone source played at 94 dB Sound Pressure Level (SPL) yields a response with RMS of 520 for 16 bit-samples (or -36 dB Full Scale for floating point/double precision samples) for each and every microphone used to record the unprocessed audio source.

  • [C-1-6] MUST have a signal-to-noise ratio (SNR) at 60 dB or higher for each and every microphone used to record the unprocessed audio source. (whereas the SNR is measured as the difference between 94 dB SPL and equivalent SPL of self noise, A-weighted).

  • [C-1-7] MUST have a total harmonic distortion (THD) less than be less than 1% for 1 kHZ at 90 dB SPL input level at each and every microphone used to record the unprocessed audio source.

  • MUST not have any other signal processing (eg Automatic Gain Control, High Pass Filter, or Echo cancellation) in the path other than a level multiplier to bring the level to desired range. Autrement dit:

  • [C-1-8] If any signal processing is present in the architecture for any reason, it MUST be disabled and effectively introduce zero delay or extra latency to the signal path.
  • [C-1-9] The level multiplier, while allowed to be on the path, MUST NOT introduce delay or latency to the signal path.

All SPL measurements are made directly next to the microphone under test. For multiple microphone configurations, these requirements apply to each microphone.

If device implementations declare android.hardware.microphone but do not support unprocessed audio source, they:

  • [C-2-1] MUST return null for the AudioManager.getProperty(PROPERTY_SUPPORT_AUDIO_SOURCE_UNPROCESSED) API method, to properly indicate the lack of support.
  • [SR] are still STRONGLY RECOMMENDED to satisfy as many of the requirements for the signal path for the unprocessed recording source.

6. Developer Tools and Options Compatibility

6.1. Outils de développement

Implémentations d'appareils :

  • [C-0-1] MUST support the Android Developer Tools provided in the Android SDK.
  • Android Debug Bridge (adb)

    • [C-0-2] MUST support adb as documented in the Android SDK and the shell commands provided in the AOSP, which can be used by app developers, including dumpsys and cmd stats .
    • [C-0-3] MUST NOT alter the format or the contents of device system events (batterystats , diskstats, fingerprint, graphicsstats, netstats, notification, procstats) logged via the dumpsys command.
    • [C-0-10] MUST record, without omission, and make the following events accessible and available to the cmd stats shell command and the StatsManager System API class.
      • ActivityForegroundStateChanged
      • AnomalyDetected
      • AppBreadcrumbReported
      • AppCrashOccurred
      • AppStartOccurred
      • BatteryLevelChanged
      • BatterySaverModeStateChanged
      • BleScanResultReceived
      • BleScanStateChanged
      • ChargingStateChanged
      • DeviceIdleModeStateChanged
      • ForegroundServiceStateChanged
      • GpsScanStateChanged
      • JobStateChanged
      • PluggedStateChanged
      • ScheduledJobStateChanged
      • ScreenStateChanged
      • SyncStateChanged
      • SystemElapsedRealtime
      • UidProcessStateChanged
      • WakelockStateChanged
      • WakeupAlarmOccurred
      • WifiLockStateChanged
      • WifiMulticastLockStateChanged
      • WifiScanStateChanged
    • [C-0-4] MUST have the device-side adb daemon be inactive by default and there MUST be a user-accessible mechanism to turn on the Android Debug Bridge.
    • [C-0-5] MUST support secure adb. Android includes support for secure adb. Secure adb enables adb on known authenticated hosts.
    • [C-0-6] MUST provide a mechanism allowing adb to be connected from a host machine. Par exemple:

      • Device implementations without a USB port supporting peripheral mode MUST implement adb via local-area network (such as Ethernet or Wi-Fi).
      • MUST provide drivers for Windows 7, 9 and 10, allowing developers to connect to the device using the adb protocol.
  • Dalvik Debug Monitor Service (ddms)

    • [C-0-7] MUST support all ddms features as documented in the Android SDK. As ddms uses adb, support for ddms SHOULD be inactive by default, but MUST be supported whenever the user has activated the Android Debug Bridge, as above.
  • Singe
    • [C-0-8] MUST include the Monkey framework and make it available for applications to use.
  • SysTrace
    • [C-0-9] MUST support the systrace tool as documented in the Android SDK. Systrace must be inactive by default and there MUST be a user-accessible mechanism to turn on Systrace.

If device implementations report the support of Vulkan 1.0 or higher via the android.hardware.vulkan.version feature flags, they:

  • [C-1-1] MUST provide an affordance for the app developer to enable/disable GPU debug layers.
  • [C-1-2] MUST, when the GPU debug layers are enabled, enumerate layers in libraries provided by external tools (ie not part of the platform or application package) found in debuggable applications' base directory to support vkEnumerateInstanceLayerProperties() and vkCreateInstance() API methods.

6.2. Options de développeur

Android includes support for developers to configure application development-related settings.

Device implementations MUST provide a consistent experience for Developer Options, they:

  • [C-0-1] MUST honor the android.settings.APPLICATION_DEVELOPMENT_SETTINGS intent to show application development-related settings. The upstream Android implementation hides the Developer Options menu by default and enables users to launch Developer Options after pressing seven (7) times on the Settings > About Device > Build Number menu item.
  • [C-0-2] MUST hide Developer Options by default.
  • [C-0-3] MUST provide a clear mechanism that does not give preferential treatment to one third-party app as opposed to another to enable Developer Options. MUST provide a public visible document or website that describes how to enable Developer Options. This document or website MUST be linkable from the Android SDK documents.
  • SHOULD have an ongoing visual notification to the user when Developer Options is enabled and the safety of the user is of concern.
  • MAY temporarily limit access to the Developer Options menu, by visually hiding or disabling the menu, to prevent distraction for scenarios where the safety of the user is of concern.

7. Compatibilité matérielle

If a device includes a particular hardware component that has a corresponding API for third-party developers:

  • [C-0-1] The device implementation MUST implement that API as described in the Android SDK documentation.

Si une API du SDK interagit avec un composant matériel qui est indiqué comme facultatif et que l'implémentation de l'appareil ne possède pas ce composant:

  • [C-0-2] Complete class definitions (as documented by the SDK) for the component APIs MUST still be presented.
  • [C-0-3] The API's behaviors MUST be implemented as no-ops in some reasonable fashion.
  • [C-0-4] API methods MUST return null values where permitted by the SDK documentation.
  • [C-0-5] API methods MUST return no-op implementations of classes where null values are not permitted by the SDK documentation.
  • [C-0-6] API methods MUST NOT throw exceptions not documented by the SDK documentation.
  • [C-0-7] Device implementations MUST consistently report accurate hardware configuration information via the getSystemAvailableFeatures() and hasSystemFeature(String) methods on the android.content.pm.PackageManager class for the same build fingerprint.

A typical example of a scenario where these requirements apply is the telephony API: Even on non-phone devices, these APIs must be implemented as reasonable no-ops.

7.1. Affichage et graphiques

Android includes facilities that automatically adjust application assets and UI layouts appropriately for the device to ensure that third-party applications run well on a variety of hardware configurations . Les appareils doivent implémenter correctement ces API et comportements, comme détaillé dans cette section.

Les unités référencées par les exigences de cette section sont définies comme suit:

  • physical diagonal size . The distance in inches between two opposing corners of the illuminated portion of the display.
  • dots per inch (dpi) . The number of pixels encompassed by a linear horizontal or vertical span of 1”. Where dpi values are listed, both horizontal and vertical dpi must fall within the range.
  • ratio d'aspect . The ratio of the pixels of the longer dimension to the shorter dimension of the screen. For example, a display of 480x854 pixels would be 854/480 = 1.779, or roughly “16:9”.
  • density-independent pixel (dp) . The virtual pixel unit normalized to a 160 dpi screen, calculated as: pixels = dps * (density/160).

7.1.1. Configuration de l'écran

7.1.1.1. Screen Size and Shape

The Android UI framework supports a variety of different logical screen layout sizes, and allows applications to query the current configuration's screen layout size via Configuration.screenLayout with the SCREENLAYOUT_SIZE_MASK and Configuration.smallestScreenWidthDp .

Implémentations d'appareils :

  • [C-0-1] MUST report the correct layout size for the Configuration.screenLayout as defined in the Android SDK documentation. Specifically, device implementations MUST report the correct logical density-independent pixel (dp) screen dimensions as below:

    • Devices with the Configuration.uiMode set as any value other than UI_MODE_TYPE_WATCH, and reporting a small size for the Configuration.screenLayout , MUST have at least 426 dp x 320 dp.
    • Devices reporting a normal size for the Configuration.screenLayout , MUST have at least 480 dp x 320 dp.
    • Devices reporting a large size for the Configuration.screenLayout , MUST have at least 640 dp x 480 dp.
    • Devices reporting a xlarge size for the Configuration.screenLayout , MUST have at least 960 dp x 720 dp.
  • [C-0-2] MUST correctly honor applications' stated support for screen sizes through the < supports-screens > attribute in the AndroidManifest.xml, as described in the Android SDK documentation.

  • MAY have a display with rounded corners.

If device implementations support UI_MODE_TYPE_NORMAL and include a display with rounded corners, they:

  • [C-1-1] MUST ensure that the radius of the rounded corners is less than or equal to 38 dp.
  • SHOULD include user affordance to switch to the display mode with the rectangular corners.
7.1.1.2. Rapport hauteur/largeur de l'écran

While there is no restriction to the screen aspect ratio value of the physical screen display, the screen aspect ratio of the logical display that third-party apps are rendered within, as can be derived from the height and width values reported through the view.Display APIs and Configuration API, MUST meet the following requirements:

  • [C-0-1] Device implementations with the Configuration.uiMode set as UI_MODE_TYPE_NORMAL MUST have an aspect ratio value between 1.3333 (4:3) and 1.86 (roughly 16:9), unless the app can be deemed as ready to be stretched longer by meeting one of the following conditions:

    • The app has declared that it supports a larger screen aspect ratio through the android.max_aspect metadata value.
    • The app declares it is resizeable via the android:resizeableActivity attribute.
    • The app is targeting API level 24 or higher and does not declare a android:MaxAspectRatio that would restrict the allowed aspect ratio.
  • [C-0-2] Device implementations with the Configuration.uiMode set as UI_MODE_TYPE_WATCH MUST have an aspect ratio value set as 1.0 (1:1).

7.1.1.3. Densité de l'écran

Le cadre d'interface utilisateur Android définit un ensemble de densités logiques standard pour aider les développeurs d'applications cibles des ressources d'application.

  • [C-0-1] By default, device implementations MUST report only one of the following logical Android framework densities through the DENSITY_DEVICE_STABLE API and this value MUST NOT change at any time; however, the device MAY report a different arbitrary density according to the display configuration changes made by the user (for example, display size) set after initial boot.

    • 120 dpi (ldpi)
    • 160 dpi (mdpi)
    • 213 dpi (tvdpi)
    • 240 dpi (hdpi)
    • 260 dpi (260dpi)
    • 280 dpi (280dpi)
    • 300 dpi (300dpi)
    • 320 dpi (xhdpi)
    • 340 dpi (340dpi)
    • 360 dpi (360dpi)
    • 400 dpi (400dpi)
    • 420 dpi (420dpi)
    • 480 dpi (xxhdpi)
    • 560 dpi (560dpi)
    • 640 dpi (xxxhdpi)
  • Les implémentations de l'appareil doivent définir la densité du cadre Android standard qui est numériquement la plus proche de la densité physique de l'écran, à moins que la densité logique pousse la taille de l'écran rapportée en dessous du minimum pris en charge. Si la densité du cadre Android standard qui est numériquement la plus proche de la densité physique se traduit par une taille d'écran plus petite que la taille d'écran compatible la plus petite prise en charge (320 dp largeur), les implémentations de périphériques doivent signaler la densité de framework Android standard la plus basse suivante.

If there is an affordance to change the display size of the device:

  • [C-1-1] The display size MUST NOT be scaled any larger than 1.5 times the native density or produce an effective minimum screen dimension smaller than 320dp (equivalent to resource qualifier sw320dp), whichever comes first.
  • [C-1-2] Display size MUST NOT be scaled any smaller than 0.85 times the native density.
  • To ensure good usability and consistent font sizes, it is RECOMMENDED that the following scaling of Native Display options be provided (while complying with the limits specified above)
  • Small: 0.85x
  • Default: 1x (Native display scale)
  • Large: 1.15x
  • Larger: 1.3x
  • Largest 1.45x

7.1.2. Afficher les métriques

If device implementations include a screen or video output, they:

If device implementations does not include an embedded screen or video output, they:

  • [C-2-1] MUST report reasonable values for all display metrics defined in the android.util.DisplayMetrics API for the emulated default view.Display .

7.1.3. Orientation de l'écran

Implémentations d'appareils :

  • [C-0-1] MUST report which screen orientations they support ( android.hardware.screen.portrait and/or android.hardware.screen.landscape ) and MUST report at least one supported orientation. For example, a device with a fixed orientation landscape screen, such as a television or laptop, SHOULD only report android.hardware.screen.landscape .
  • [C-0-2] MUST report the correct value for the device's current orientation, whenever queried via the android.content.res.Configuration.orientation , android.view.Display.getOrientation() , or other APIs.

If device implementations support both screen orientations, they:

  • [C-1-1] MUST support dynamic orientation by applications to either portrait or landscape screen orientation. Autrement dit, l'appareil doit respecter la demande de l'application concernant une orientation spécifique de l'écran.
  • [C-1-2] MUST NOT change the reported screen size or density when changing orientation.
  • MAY select either portrait or landscape orientation as the default.

7.1.4. Accélération graphique 2D et 3D

7.1.4.1 OpenGL ES

Implémentations d'appareils :

  • [C-0-1] MUST correctly identify the supported OpenGL ES versions (1.1, 2.0, 3.0, 3.1, 3.2) through the managed APIs (such as via the GLES10.getString() method) and the native APIs.
  • [C-0-2] MUST include the support for all the corresponding managed APIs and native APIs for every OpenGL ES versions they identified to support.

If device implementations include a screen or video output, they:

  • [C-1-1] MUST support both OpenGL ES 1.1 and 2.0, as embodied and detailed in the Android SDK documentation .
  • [SR] are STRONGLY RECOMMENDED to support OpenGL ES 3.1.
  • SHOULD support OpenGL ES 3.2.

If device implementations support any of the OpenGL ES versions, they:

  • [C-2-1] MUST report via the OpenGL ES managed APIs and native APIs any other OpenGL ES extensions they have implemented, and conversely MUST NOT report extension strings that they do not support.
  • [C-2-2] MUST support the EGL_KHR_image , EGL_KHR_image_base , EGL_ANDROID_image_native_buffer , EGL_ANDROID_get_native_client_buffer , EGL_KHR_wait_sync , EGL_KHR_get_all_proc_addresses , EGL_ANDROID_presentation_time , EGL_KHR_swap_buffers_with_damage and EGL_ANDROID_recordable extensions.
  • [SR] are STRONGLY RECOMMENDED to support EGL_KHR_partial_update.
  • SHOULD accurately report via the getString() method, any texture compression format that they support, which is typically vendor-specific.

If device implementations declare support for OpenGL ES 3.0, 3.1, or 3.2, they:

  • [C-3-1] MUST export the corresponding function symbols for these version in addition to the OpenGL ES 2.0 function symbols in the libGLESv2.so library.

If device implementations support OpenGL ES 3.2, they:

  • [C-4-1] MUST support the OpenGL ES Android Extension Pack in its entirety.

If device implementations support the OpenGL ES Android Extension Pack in its entirety, they:

  • [C-5-1] MUST identify the support through the android.hardware.opengles.aep feature flag.

If device implementations expose support for the EGL_KHR_mutable_render_buffer extension, they:

  • [C-6-1] MUST also support the EGL_ANDROID_front_buffer_auto_refresh extension.
7.1.4.2 Vulkan

Android includes support for Vulkan , a low-overhead, cross-platform API for high-performance 3D graphics.

If device implementations support OpenGL ES 3.1, they:

  • [SR] Are STRONGLY RECOMMENDED to include support for Vulkan 1.1.

If device implementations include a screen or video output, they:

  • SHOULD include support for Vulkan 1.1.

If device implementations include support for Vulkan 1.0, they:

  • [C-1-1] MUST report the correct integer value with the android.hardware.vulkan.level and android.hardware.vulkan.version feature flags.
  • [C-1-2] MUST enumerate, at least one VkPhysicalDevice for the Vulkan native API vkEnumeratePhysicalDevices() .
  • [C-1-3] MUST fully implement the Vulkan 1.0 APIs for each enumerated VkPhysicalDevice .
  • [C-1-4] MUST enumerate layers, contained in native libraries named as libVkLayer*.so in the application package's native library directory, through the Vulkan native APIs vkEnumerateInstanceLayerProperties() and vkEnumerateDeviceLayerProperties() .
  • [C-1-5] MUST NOT enumerate layers provided by libraries outside of the application package, or provide other ways of tracing or intercepting the Vulkan API, unless the application has the android:debuggable attribute set as true .
  • [C-1-6] MUST report all extension strings that they do support via the Vulkan native APIs , and conversely MUST NOT report extension strings that they do not correctly support.
  • [C-1-7] MUST support the VK_KHR_surface, VK_KHR_android_surface, VK_KHR_swapchain, and VK_KHR_incremental_present extensions.

If device implementations do not include support for Vulkan 1.0, they:

  • [C-2-1] MUST NOT declare any of the Vulkan feature flags (eg android.hardware.vulkan.level , android.hardware.vulkan.version ).
  • [C-2-2] MUST NOT enumerate any VkPhysicalDevice for the Vulkan native API vkEnumeratePhysicalDevices() .

If device implementations include support for Vulkan 1.1, they:

  • [C-3-1] MUST expose support for the SYNC_FD external semaphore and handle types.
  • [SR] Are STRONGLY RECOMMENDED to support the VK_ANDROID_external_memory_android_hardware_buffer extension.
7.1.4.3 RenderScript
  • [C-0-1] Device implementations MUST support Android RenderScript , as detailed in the Android SDK documentation.
7.1.4.4 2D Graphics Acceleration

Android includes a mechanism for applications to declare that they want to enable hardware acceleration for 2D graphics at the Application, Activity, Window, or View level through the use of a manifest tag android:hardwareAccelerated or direct API calls.

Implémentations d'appareils :

  • [C-0-1] MUST enable hardware acceleration by default, and MUST disable hardware acceleration if the developer so requests by setting android:hardwareAccelerated="false” or disabling hardware acceleration directly through the Android View APIs.
  • [C-0-2] MUST exhibit behavior consistent with the Android SDK documentation on hardware acceleration .

Android includes a TextureView object that lets developers directly integrate hardware-accelerated OpenGL ES textures as rendering targets in a UI hierarchy.

Implémentations d'appareils :

  • [C-0-3] MUST support the TextureView API, and MUST exhibit consistent behavior with the upstream Android implementation.
7.1.4.5 Wide-gamut Displays

If device implementations claim support for wide-gamut displays through Configuration.isScreenWideColorGamut() , they:

  • [C-1-1] MUST have a color-calibrated display.
  • [C-1-2] MUST have a display whose gamut covers the sRGB color gamut entirely in CIE 1931 xyY space.
  • [C-1-3] MUST have a display whose gamut has an area of at least 90% of DCI-P3 in CIE 1931 xyY space.
  • [C-1-4] MUST support OpenGL ES 3.1 or 3.2 and report it properly.
  • [C-1-5] MUST advertise support for the EGL_KHR_no_config_context , EGL_EXT_pixel_format_float , EGL_KHR_gl_colorspace , EGL_EXT_gl_colorspace_scrgb , EGL_EXT_gl_colorspace_scrgb_linear , EGL_EXT_gl_colorspace_display_p3 , and EGL_KHR_gl_colorspace_display_p3 extensions.
  • [SR] Are STRONGLY RECOMMENDED to support GL_EXT_sRGB .

Conversely, if device implementations do not support wide-gamut displays, they:

  • [C-2-1] SHOULD cover 100% or more of sRGB in CIE 1931 xyY space, although the screen color gamut is undefined.

7.1.5. Mode de compatibilité des applications héritées

Android specifies a “compatibility mode” in which the framework operates in a 'normal' screen size equivalent (320dp width) mode for the benefit of legacy applications not developed for old versions of Android that pre-date screen-size independence.

7.1.6. Technologie d'écran

The Android platform includes APIs that allow applications to render rich graphics to the display. Devices MUST support all of these APIs as defined by the Android SDK unless specifically allowed in this document.

Implémentations d'appareils :

  • [C-0-1] MUST support displays capable of rendering 16-bit color graphics.
  • SHOULD support displays capable of 24-bit color graphics.
  • [C-0-2] MUST support displays capable of rendering animations.
  • [C-0-3] MUST use the display technology that have a pixel aspect ratio (PAR) between 0.9 and 1.15. That is, the pixel aspect ratio MUST be near square (1.0) with a 10 ~ 15% tolerance.

7.1.7. Secondary Displays

Android includes support for secondary display to enable media sharing capabilities and developer APIs for accessing external displays.

If device implementations support an external display either via a wired, wireless, or an embedded additional display connection, they:

  • [C-1-1] MUST implement the DisplayManager system service and API as described in the Android SDK documentation.

7.2. Des dispositifs d'entrée

Implémentations d'appareils :

7.2.1. Clavier

If device implementations include support for third-party Input Method Editor (IME) applications, they:

Device implementations: * [C-0-1] MUST NOT include a hardware keyboard that does not match one of the formats specified in android.content.res.Configuration.keyboard (QWERTY or 12-key). * SHOULD include additional soft keyboard implementations. * MAY include a hardware keyboard.

7.2.2. Navigation non tactile

Android includes support for d-pad, trackball, and wheel as mechanisms for non-touch navigation.

Implémentations d'appareils :

If device implementations lack non-touch navigations, they:

  • [C-1-1] MUST provide a reasonable alternative user interface mechanism for the selection and editing of text, compatible with Input Management Engines. The upstream Android open source implementation includes a selection mechanism suitable for use with devices that lack non-touch navigation inputs.

7.2.3. Navigation Keys

The Home , Recents , and Back functions typically provided via an interaction with a dedicated physical button or a distinct portion of the touch screen, are essential to the Android navigation paradigm and therefore, device implementations:

  • [C-0-1] MUST provide a user affordance to launch installed applications that have an activity with the <intent-filter> set with ACTION=MAIN and CATEGORY=LAUNCHER or CATEGORY=LEANBACK_LAUNCHER for Television device implementations. The Home function SHOULD be the mechanism for this user affordance.
  • SHOULD provide buttons for the Recents and Back function.

If the Home, Recents, or Back functions are provided, they:

  • [C-1-1] MUST be accessible with a single action (eg tap, double-click or gesture) when any of them are accessible.
  • [C-1-2] MUST provide a clear indication of which single action would trigger each function. Having a visible icon imprinted on the button, showing a software icon on the navigation bar portion of the screen, or walking the user through a guided step-by-step demo flow during the out-of-box setup experience are examples of such an indication.

Implémentations d'appareils :

  • [SR] are STRONGLY RECOMMENDED to not provide the input mechanism for the Menu function as it is deprecated in favor of action bar since Android 4.0.

If device implementations provide the Menu function, they:

  • [C-2-1] MUST display the action overflow button whenever the action overflow menu popup is not empty and the action bar is visible.
  • [C-2-2] MUST NOT modify the position of the action overflow popup displayed by selecting the overflow button in the action bar, but MAY render the action overflow popup at a modified position on the screen when it is displayed by selecting the Menu fonction.

If device implementations do not provide the Menu function, for backwards compatibility, they: * [C-3-1] MUST make the Menu function available to applications when targetSdkVersion is less than 10, either by a physical button, a software key, or gestes. This Menu function should be accessible unless hidden together with other navigation functions.

If device implementations provide the Assist function , they: * [C-4-1] MUST make the Assist function accessible with a single action (eg tap, double-click or gesture) when other navigation keys are accessible. * [SR] STRONGLY RECOMMENDED to use long press on HOME function as this designated interaction.

If device implementations use a distinct portion of the screen to display the navigation keys, they:

  • [C-5-1] Navigation keys MUST use a distinct portion of the screen, not available to applications, and MUST NOT obscure or otherwise interfere with the portion of the screen available to applications.
  • [C-5-2] MUST make available a portion of the display to applications that meets the requirements defined in section 7.1.1 .
  • [C-5-3] MUST honor the flags set by the app through the View.setSystemUiVisibility() API method, so that this distinct portion of the screen (aka the navigation bar) is properly hidden away as documented in the SDK.

7.2.4. Touchscreen Input

Android includes support for a variety of pointer input systems, such as touchscreens, touch pads, and fake touch input devices. Touchscreen-based device implementations are associated with a display such that the user has the impression of directly manipulating items on screen. Since the user is directly touching the screen, the system does not require any additional affordances to indicate the objects being manipulated.

Implémentations d'appareils :

  • SHOULD have a pointer input system of some kind (either mouse-like or touch).
  • SHOULD support fully independently tracked pointers.

If device implementations include a touchscreen (single-touch or better), they:

  • [C-1-1] MUST report TOUCHSCREEN_FINGER for the Configuration.touchscreen API field.
  • [C-1-2] MUST report the android.hardware.touchscreen and android.hardware.faketouch feature flags.

If device implementations include a touchscreen that can track more than a single touch, they:

  • [C-2-1] MUST report the appropriate feature flags android.hardware.touchscreen.multitouch , android.hardware.touchscreen.multitouch.distinct , android.hardware.touchscreen.multitouch.jazzhand corresponding to the type of the specific touchscreen on the appareil.

If device implementations do not include a touchscreen (and rely on a pointer device only) and meet the fake touch requirements in section 7.2.5 , they:

  • [C-3-1] MUST NOT report any feature flag starting with android.hardware.touchscreen and MUST report only android.hardware.faketouch .

7.2.5. Fake Touch Input

Fake touch interface provides a user input system that approximates a subset of touchscreen capabilities. For example, a mouse or remote control that drives an on-screen cursor approximates touch, but requires the user to first point or focus then click. Numerous input devices like the mouse, trackpad, gyro-based air mouse, gyro-pointer, joystick, and multi-touch trackpad can support fake touch interactions. Android includes the feature constant android.hardware.faketouch, which corresponds to a high-fidelity non-touch (pointer-based) input device such as a mouse or trackpad that can adequately emulate touch-based input (including basic gesture support), and indicates that the device supports an emulated subset of touchscreen functionality.

If device implementations do not include a touchscreen but include another pointer input system which they want to make available, they:

  • SHOULD declare support for the android.hardware.faketouch feature flag.

If device implementations declare support for android.hardware.faketouch , they:

  • [C-1-1] MUST report the absolute X and Y screen positions of the pointer location and display a visual pointer on the screen.
  • [C-1-2] MUST report touch event with the action code that specifies the state change that occurs on the pointer going down or up on the screen .
  • [C-1-3] MUST support pointer down and up on an object on the screen, which allows users to emulate tap on an object on the screen.
  • [C-1-4] MUST support pointer down, pointer up, pointer down then pointer up in the same place on an object on the screen within a time threshold, which allows users to emulate double tap on an object on the screen.
  • [C-1-5] MUST support pointer down on an arbitrary point on the screen, pointer move to any other arbitrary point on the screen, followed by a pointer up, which allows users to emulate a touch drag.
  • [C-1-6] MUST support pointer down then allow users to quickly move the object to a different position on the screen and then pointer up on the screen, which allows users to fling an object on the screen.
  • [C-1-7] MUST report TOUCHSCREEN_NOTOUCH for the Configuration.touchscreen API field.

If device implementations declare support for android.hardware.faketouch.multitouch.distinct , they:

  • [C-2-1] MUST declare support for android.hardware.faketouch .
  • [C-2-2] MUST support distinct tracking of two or more independent pointer inputs.

If device implementations declare support for android.hardware.faketouch.multitouch.jazzhand , they:

  • [C-3-1] MUST declare support for android.hardware.faketouch .
  • [C-3-2] MUST support distinct tracking of 5 (tracking a hand of fingers) or more pointer inputs fully independently.

7.2.6. Game Controller Support

7.2.6.1. Button Mappings

If device implementations declare the android.hardware.gamepad feature flag, they:

  • [C-1-1] MUST have embed a controller or ship with a separate controller in the box, that would provide means to input all the events listed in the below tables.
  • [C-1-2] MUST be capable to map HID events to it's associated Android view.InputEvent constants as listed in the below tables. The upstream Android implementation includes implementation for game controllers that satisfies this requirement.
Bouton HID Usage 2 Android Button
Un 1 0x09 0x0001 KEYCODE_BUTTON_A (96)
B 1 0x09 0x0002 KEYCODE_BUTTON_B (97)
X1 _ 0x09 0x0004 KEYCODE_BUTTON_X (99)
Y 1 0x09 0x0005 KEYCODE_BUTTON_Y (100)
D-pad up 1
D-pad down 1
0x01 0x0039 3 AXIS_HAT_Y 4
D-pad left 1
D-pad right 1
0x01 0x0039 3 AXIS_HAT_X 4
Left shoulder button 1 0x09 0x0007 KEYCODE_BUTTON_L1 (102)
Right shoulder button 1 0x09 0x0008 KEYCODE_BUTTON_R1 (103)
Left stick click 1 0x09 0x000E KEYCODE_BUTTON_THUMBL (106)
Right stick click 1 0x09 0x000F KEYCODE_BUTTON_THUMBR (107)
Maison 1 0x0c 0x0223 KEYCODE_HOME (3)
Back 1 0x0c 0x0224 KEYCODE_BACK (4)

1 KeyEvent

2 The above HID usages must be declared within a Game pad CA (0x01 0x0005).

3 This usage must have a Logical Minimum of 0, a Logical Maximum of 7, a Physical Minimum of 0, a Physical Maximum of 315, Units in Degrees, and a Report Size of 4. The logical value is defined to be the clockwise rotation away from the vertical axis; for example, a logical value of 0 represents no rotation and the up button being pressed, while a logical value of 1 represents a rotation of 45 degrees and both the up and left keys being pressed.

4 MotionEvent

Analog Controls 1 HID Usage Android Button
Gâchette gauche 0x02 0x00C5 AXIS_LTRIGGER
Right Trigger 0x02 0x00C4 AXIS_RTRIGGER
Left Joystick 0x01 0x0030
0x01 0x0031
AXIS_X
AXIS_Y
Right Joystick 0x01 0x0032
0x01 0x0035
AXIS_Z
AXIS_RZ

1 MotionEvent

7.2.7. Télécommande

See Section 2.3.1 for device-specific requirements.

7.3. Capteurs

If device implementations include a particular sensor type that has a corresponding API for third-party developers, the device implementation MUST implement that API as described in the Android SDK documentation and the Android Open Source documentation on sensors .

Implémentations d'appareils :

  • [C-0-1] MUST accurately report the presence or absence of sensors per the android.content.pm.PackageManager class.
  • [C-0-2] MUST return an accurate list of supported sensors via the SensorManager.getSensorList() and similar methods.
  • [C-0-3] MUST behave reasonably for all other sensor APIs (for example, by returning true or false as appropriate when applications attempt to register listeners, not calling sensor listeners when the corresponding sensors are not present; etc.).

If device implementations include a particular sensor type that has a corresponding API for third-party developers, they:

  • [C-1-1] MUST report all sensor measurements using the relevant International System of Units (metric) values for each sensor type as defined in the Android SDK documentation.
  • [C-1-2] MUST report sensor data with a maximum latency of 100 milliseconds + 2 * sample_time for the case of a sensor streamed with a minimum required latency of 5 ms + 2 * sample_time when the application processor is active. This delay does not include any filtering delays.
  • [C-1-3] MUST report the first sensor sample within 400 milliseconds + 2 * sample_time of the sensor being activated. It is acceptable for this sample to have an accuracy of 0.
  • [SR] SHOULD report the event time in nanoseconds as defined in the Android SDK documentation, representing the time the event happened and synchronized with the SystemClock.elapsedRealtimeNano() clock. Existing and new Android devices are STRONGLY RECOMMENDED to meet these requirements so they will be able to upgrade to the future platform releases where this might become a REQUIRED component. The synchronization error SHOULD be below 100 milliseconds.

  • [C-1-4] For any API indicated by the Android SDK documentation to be a continuous sensor , device implementations MUST continuously provide periodic data samples that SHOULD have a jitter below 3%, where jitter is defined as the standard deviation of the difference of the reported timestamp values between consecutive events.

  • [C-1-5] MUST ensure that the sensor event stream MUST NOT prevent the device CPU from entering a suspend state or waking up from a suspend state.

  • When several sensors are activated, the power consumption SHOULD NOT exceed the sum of the individual sensor's reported power consumption.

The list above is not comprehensive; the documented behavior of the Android SDK and the Android Open Source Documentations on sensors is to be considered authoritative.

Some sensor types are composite, meaning they can be derived from data provided by one or more other sensors. (Examples include the orientation sensor and the linear acceleration sensor.)

Implémentations d'appareils :

  • SHOULD implement these sensor types, when they include the prerequisite physical sensors as described in sensor types .

If device implementations include a composite sensor, they:

  • [C-2-1] MUST implement the sensor as described in the Android Open Source documentation on composite sensors .

7.3.1. Accéléromètre

  • Device implementations SHOULD include a 3-axis accelerometer.

If device implementations include a 3-axis accelerometer, they:

  • [C-1-1] MUST be able to report events up to a frequency of at least 50 Hz.
  • [C-1-2] MUST implement and report TYPE_ACCELEROMETER sensor.
  • [C-1-3] MUST comply with the Android sensor coordinate system as detailed in the Android APIs.
  • [C-1-4] MUST be capable of measuring from freefall up to four times the gravity(4g) or more on any axis.
  • [C-1-5] MUST have a resolution of at least 12-bits.
  • [C-1-6] MUST have a standard deviation no greater than 0.05 m/s^, where the standard deviation should be calculated on a per axis basis on samples collected over a period of at least 3 seconds at the fastest sampling rate.
  • [SR] are STRONGLY RECOMMENDED to implement the TYPE_SIGNIFICANT_MOTION composite sensor.
  • [SR] are STRONGLY RECOMMENDED to implement the TYPE_ACCELEROMETER_UNCALIBRATED sensor if online accelerometer calibration is available.
  • SHOULD implement the TYPE_SIGNIFICANT_MOTION , TYPE_TILT_DETECTOR , TYPE_STEP_DETECTOR , TYPE_STEP_COUNTER composite sensors as described in the Android SDK document.
  • SHOULD report events up to at least 200 Hz.
  • SHOULD have a resolution of at least 16-bits.
  • SHOULD be calibrated while in use if the characteristics changes over the life cycle and compensated, and preserve the compensation parameters between device reboots.
  • SHOULD be temperature compensated.
  • SHOULD also implement TYPE_ACCELEROMETER_UNCALIBRATED sensor.

If device implementations include a 3-axis accelerometer and any of the TYPE_SIGNIFICANT_MOTION , TYPE_TILT_DETECTOR , TYPE_STEP_DETECTOR , TYPE_STEP_COUNTER composite sensors are implemented:

  • [C-2-1] The sum of their power consumption MUST always be less than 4 mW.
  • SHOULD each be below 2 mW and 0.5 mW for when the device is in a dynamic or static condition.

If device implementations include a 3-axis accelerometer and a gyroscope sensor, they:

  • [C-3-1] MUST implement the TYPE_GRAVITY and TYPE_LINEAR_ACCELERATION composite sensors.
  • SHOULD implement the TYPE_GAME_ROTATION_VECTOR composite sensor.
  • [SR] Existing and new Android devices are STRONGLY RECOMMENDED to implement the TYPE_GAME_ROTATION_VECTOR sensor.

If device implementations include a 3-axis accelerometer, a gyroscope sensor and a magnetometer sensor, they:

  • [C-4-1] MUST implement a TYPE_ROTATION_VECTOR composite sensor.

7.3.2. Magnétomètre

  • Device implementations SHOULD include a 3-axis magnetometer (compass).

If device implementations include a 3-axis magnetometer, they:

  • [C-1-1] MUST implement the TYPE_MAGNETIC_FIELD sensor.
  • [C-1-2] MUST be able to report events up to a frequency of at least 10 Hz and SHOULD report events up to at least 50 Hz.
  • [C-1-3] MUST comply with the Android sensor coordinate system as detailed in the Android APIs.
  • [C-1-4] MUST be capable of measuring between -900 µT and +900 µT on each axis before saturating.
  • [C-1-5] MUST have a hard iron offset value less than 700 µT and SHOULD have a value below 200 µT, by placing the magnetometer far from dynamic (current-induced) and static (magnet-induced) magnetic fields.
  • [C-1-6] MUST have a resolution equal or denser than 0.6 µT.
  • [C-1-7] MUST support online calibration and compensation of the hard iron bias, and preserve the compensation parameters between device reboots.
  • [C-1-8] MUST have the soft iron compensation applied—the calibration can be done either while in use or during the production of the device.
  • [C-1-9] MUST have a standard deviation, calculated on a per axis basis on samples collected over a period of at least 3 seconds at the fastest sampling rate, no greater than 1.5 µT; SHOULD have a standard deviation no greater than 0.5 µT.
  • SHOULD implement TYPE_MAGNETIC_FIELD_UNCALIBRATED sensor.
  • [SR] Existing and new Android devices are STRONGLY RECOMMENDED to implement the TYPE_MAGNETIC_FIELD_UNCALIBRATED sensor.

If device implementations include a 3-axis magnetometer, an accelerometer sensor and a gyroscope sensor, they:

  • [C-2-1] MUST implement a TYPE_ROTATION_VECTOR composite sensor.

If device implementations include a 3-axis magnetometer, an accelerometer, they:

  • MAY implement the TYPE_GEOMAGNETIC_ROTATION_VECTOR sensor.

If device implementations include a 3-axis magnetometer, an accelerometer and TYPE_GEOMAGNETIC_ROTATION_VECTOR sensor, they:

  • [C-3-1] MUST consume less than 10 mW.
  • SHOULD consume less than 3 mW when the sensor is registered for batch mode at 10 Hz.

7.3.3. GPS

Implémentations d'appareils :

  • SHOULD include a GPS/GNSS receiver.

If device implementations include a GPS/GNSS receiver and report the capability to applications through the android.hardware.location.gps feature flag, they:

  • [C-1-1] MUST support location outputs at a rate of at least 1 Hz when requested via LocationManager#requestLocationUpdate .
  • [C-1-2] MUST be able to determine the location in open-sky conditions (strong signals, negligible multipath, HDOP < 2) within 10 seconds (fast time to first fix), when connected to a 0.5 Mbps or faster data speed internet connection. This requirement is typically met by the use of some form of Assisted or Predicted GPS/GNSS technique to minimize GPS/GNSS lock-on time (Assistance data includes Reference Time, Reference Location and Satellite Ephemeris/Clock).
    • [C-1-6] After making such a location calculation, device implementations MUST determine its location, in open sky, within 5 seconds, when location requests are restarted, up to an hour after the initial location calculation, even when the subsequent request is made without a data connection, and/or after a power cycle.
  • In open sky conditions after determining the location, while stationary or moving with less than 1 meter per second squared of acceleration:

    • [C-1-3] MUST be able to determine location within 20 meters, and speed within 0.5 meters per second, at least 95% of the time.
    • [C-1-4] MUST simultaneously track and report via GnssStatus.Callback at least 8 satellites from one constellation.
    • DEVRAIT être capable de suivre simultanément au moins 24 satellites, provenant de plusieurs constellations (par exemple GPS + au moins un parmi Glonass, Beidou, Galileo).
    • [C-1-5] MUST report the GNSS technology generation through the test API 'getGnssYearOfHardware'.
    • [SR] Continue to deliver normal GPS/GNSS location outputs during an emergency phone call.
    • [SR] Report GNSS measurements from all constellations tracked (as reported in GnssStatus messages), with the exception of SBAS.
    • [SR] Report AGC, and Frequency of GNSS measurement.
    • [SR] Report all accuracy estimates (including Bearing, Speed, and Vertical) as part of each GPS/GNSS location.
    • [SR] are STRONGLY RECOMMENDED to meet as many as possible from the additional mandatory requirements for devices reporting the year "2016" or "2017" through the Test API LocationManager.getGnssYearOfHardware() .

If device implementations include a GPS/GNSS receiver and report the capability to applications through the android.hardware.location.gps feature flag and the LocationManager.getGnssYearOfHardware() Test API reports the year "2016" or newer, they:

  • [C-2-1] MUST report GNSS measurements, as soon as they are found, even if a location calculated from GPS/GNSS is not yet reported.
  • [C-2-2] MUST report GNSS pseudoranges and pseudorange rates, that, in open-sky conditions after determining the location, while stationary or moving with less than 0.2 meter per second squared of acceleration, are sufficient to calculate position within 20 meters, and speed within 0.2 meters per second, at least 95% of the time.

If device implementations include a GPS/GNSS receiver and report the capability to applications through the android.hardware.location.gps feature flag and the LocationManager.getGnssYearOfHardware() Test API reports the year "2017" or newer, they:

  • [C-3-1] MUST continue to deliver normal GPS/GNSS location outputs during an emergency phone call.
  • [C-3-2] MUST report GNSS measurements from all constellations tracked (as reported in GnssStatus messages), with the exception of SBAS.
  • [C-3-3] MUST report AGC, and Frequency of GNSS measurement.
  • [C-3-4] MUST report all accuracy estimates (including Bearing, Speed, and Vertical) as part of each GPS/GNSS location.

If device implementations include a GPS/GNSS receiver and report the capability to applications through the android.hardware.location.gps feature flag and the LocationManager.getGnssYearOfHardware() Test API reports the year "2018" or newer, they:

  • [C-4-1] MUST continue to deliver normal GPS/GNSS outputs to applications during a Mobile Station Based (MS-Based) Network Initiated emergency session call.
  • [C-4-2] MUST report positions and measurements to the GNSS Location Provider API's.

7.3.4. Gyroscope

Implémentations d'appareils :

  • SHOULD include a gyroscope (angular change sensor).
  • SHOULD NOT include a gyroscope sensor unless a 3-axis accelerometer is also included.

If device implementations include a gyroscope, they:

  • [C-1-1] MUST be able to report events up to a frequency of at least 50 Hz.
  • [C-1-2] MUST implement the TYPE_GYROSCOPE sensor and SHOULD also implement TYPE_GYROSCOPE_UNCALIBRATED sensor.
  • [C-1-3] MUST be capable of measuring orientation changes up to 1,000 degrees per second.
  • [C-1-4] MUST have a resolution of 12-bits or more and SHOULD have a resolution of 16-bits or more.
  • [C-1-5] MUST be temperature compensated.
  • [C-1-6] MUST be calibrated and compensated while in use, and preserve the compensation parameters between device reboots.
  • [C-1-7] MUST have a variance no greater than 1e-7 rad^2 / s^2 per Hz (variance per Hz, or rad^2 / s). The variance is allowed to vary with the sampling rate, but MUST be constrained by this value. In other words, if you measure the variance of the gyro at 1 Hz sampling rate it SHOULD be no greater than 1e-7 rad^2/s^2.
  • [SR] Existing and new Android devices are STRONGLY RECOMMENDED to implement the SENSOR_TYPE_GYROSCOPE_UNCALIBRATED sensor.
  • [SR] Calibration error is STRONGLY RECOMMENDED to be less than 0.01 rad/s when device is stationary at room temperature.
  • SHOULD report events up to at least 200 Hz.

If device implementations include a gyroscope, an accelerometer sensor and a magnetometer sensor, they:

  • [C-2-1] MUST implement a TYPE_ROTATION_VECTOR composite sensor.

If device implementations include a gyroscope and a accelerometer sensor, they:

  • [C-3-1] MUST implement the TYPE_GRAVITY and TYPE_LINEAR_ACCELERATION composite sensors.
  • [SR] Existing and new Android devices are STRONGLY RECOMMENDED to implement the TYPE_GAME_ROTATION_VECTOR sensor.
  • SHOULD implement the TYPE_GAME_ROTATION_VECTOR composite sensor.

7.3.5. Baromètre

  • Device implementations SHOULD include a barometer (ambient air pressure sensor).

If device implementations include a barometer, they:

  • [C-1-1] MUST implement and report TYPE_PRESSURE sensor.
  • [C-1-2] MUST be able to deliver events at 5 Hz or greater.
  • [C-1-3] MUST be temperature compensated.
  • [SR] STRONGLY RECOMMENDED to be able to report pressure measurements in the range 300hPa to 1100hPa.
  • SHOULD have an absolute accuracy of 1hPa.
  • SHOULD have a relative accuracy of 0.12hPa over 20hPa range (equivalent to ~1m accuracy over ~200m change at sea level).

7.3.6. Thermomètre

Device implementations: * MAY include an ambient thermometer (temperature sensor). * MAY but SHOULD NOT include a CPU temperature sensor.

If device implementations include an ambient thermometer (temperature sensor), they:

  • [C-1-1] MUST be defined as SENSOR_TYPE_AMBIENT_TEMPERATURE and MUST measure the ambient (room/vehicle cabin) temperature from where the user is interacting with the device in degrees Celsius.
  • [C-1-2] MUST be defined as SENSOR_TYPE_TEMPERATURE .
  • [C-1-3] MUST measure the temperature of the device CPU.
  • [C-1-4] MUST NOT measure any other temperature.

Note the SENSOR_TYPE_TEMPERATURE sensor type was deprecated in Android 4.0.

7.3.7. Photomètre

  • Device implementations MAY include a photometer (ambient light sensor).

7.3.8. Capteur de proximité

  • Device implementations MAY include a proximity sensor.

If device implementations include a proximity sensor, they:

  • [C-1-1] MUST measure the proximity of an object in the same direction as the screen. That is, the proximity sensor MUST be oriented to detect objects close to the screen, as the primary intent of this sensor type is to detect a phone in use by the user. If device implementations include a proximity sensor with any other orientation, it MUST NOT be accessible through this API.
  • [C-1-2] MUST have 1-bit of accuracy or more.

7.3.9. High Fidelity Sensors

If device implementations include a set of higher quality sensors as defined in this section, and make available them to third-party apps, they:

  • [C-1-1] MUST identify the capability through the android.hardware.sensor.hifi_sensors feature flag.

If device implementations declare android.hardware.sensor.hifi_sensors , they:

  • [C-2-1] MUST have a TYPE_ACCELEROMETER sensor which:

    • MUST have a measurement range between at least -8g and +8g, SHOULD have a measurement range between at least -16g and +16g.
    • MUST have a measurement resolution of at least 2048 LSB/g.
    • MUST have a minimum measurement frequency of 12.5 Hz or lower.
    • MUST have a maximum measurement frequency of 400 Hz or higher; SHOULD support the SensorDirectChannel RATE_VERY_FAST .
    • MUST have a measurement noise not above 400 μg/√Hz.
    • MUST implement a non-wake-up form of this sensor with a buffering capability of at least 3000 sensor events.
    • MUST have a batching power consumption not worse than 3 mW.
    • [C-SR] Is STRONGLY RECOMMENDED to have 3dB measurement bandwidth of at least 80% of Nyquist frequency, and white noise spectrum within this bandwidth.
    • SHOULD have an acceleration random walk less than 30 μg √Hz tested at room temperature.
    • SHOULD have a bias change vs. temperature of ≤ +/- 1 mg/°C.
    • SHOULD have a best-fit line non-linearity of ≤ 0.5%, and sensitivity change vs. temperature of ≤ 0.03%/C°.
    • SHOULD have cross-axis sensitivity of < 2.5 % and variation of cross-axis sensitivity < 0.2% in device operation temperature range.
  • [C-2-2] MUST have a TYPE_ACCELEROMETER_UNCALIBRATED with the same quality requirements as TYPE_ACCELEROMETER .

  • [C-2-3] MUST have a TYPE_GYROSCOPE sensor which:

    • MUST have a measurement range between at least -1000 and +1000 dps.
    • MUST have a measurement resolution of at least 16 LSB/dps.
    • MUST have a minimum measurement frequency of 12.5 Hz or lower.
    • MUST have a maximum measurement frequency of 400 Hz or higher; SHOULD support the SensorDirectChannel RATE_VERY_FAST .
    • MUST have a measurement noise not above 0.014°/s/√Hz.
    • [C-SR] Is STRONGLY RECOMMENDED to have 3dB measurement bandwidth of at least 80% of Nyquist frequency, and white noise spectrum within this bandwidth.
    • SHOULD have a rate random walk less than 0.001 °/s √Hz tested at room temperature.
    • SHOULD have a bias change vs. temperature of ≤ +/- 0.05 °/ s / °C.
    • SHOULD have a sensitivity change vs. temperature of ≤ 0.02% / °C.
    • SHOULD have a best-fit line non-linearity of ≤ 0.2%.
    • SHOULD have a noise density of ≤ 0.007 °/s/√Hz.
    • SHOULD have calibration error less than 0.002 rad/s in temperature range 10 ~ 40 ℃ when device is stationary.
    • SHOULD have g-sensitivity less than 0.1°/s/g.
    • SHOULD have cross-axis sensitivity of < 4.0 % and cross-axis sensitivity variation < 0.3% in device operation temperature range.
  • [C-2-4] MUST have a TYPE_GYROSCOPE_UNCALIBRATED with the same quality requirements as TYPE_GYROSCOPE .

  • [C-2-5] MUST have a TYPE_GEOMAGNETIC_FIELD sensor which:

    • MUST have a measurement range between at least -900 and +900 μT.
    • MUST have a measurement resolution of at least 5 LSB/uT.
    • MUST have a minimum measurement frequency of 5 Hz or lower.
    • MUST have a maximum measurement frequency of 50 Hz or higher.
    • MUST have a measurement noise not above 0.5 uT.
  • [C-2-6] MUST have a TYPE_MAGNETIC_FIELD_UNCALIBRATED with the same quality requirements as TYPE_GEOMAGNETIC_FIELD and in addition:

    • MUST implement a non-wake-up form of this sensor with a buffering capability of at least 600 sensor events.
    • [C-SR] Is STRONGLY RECOMMENDED to have white noise spectrum from 1 Hz to at least 10 Hz when the report rate is 50 Hz or higher.
  • [C-2-7] MUST have a TYPE_PRESSURE sensor which:

    • MUST have a measurement range between at least 300 and 1100 hPa.
    • MUST have a measurement resolution of at least 80 LSB/hPa.
    • MUST have a minimum measurement frequency of 1 Hz or lower.
    • MUST have a maximum measurement frequency of 10 Hz or higher.
    • MUST have a measurement noise not above 2 Pa/√Hz.
    • MUST implement a non-wake-up form of this sensor with a buffering capability of at least 300 sensor events.
    • MUST have a batching power consumption not worse than 2 mW.
  • [C-2-8] MUST have a TYPE_GAME_ROTATION_VECTOR sensor which:
    • MUST implement a non-wake-up form of this sensor with a buffering capability of at least 300 sensor events.
    • MUST have a batching power consumption not worse than 4 mW.
  • [C-2-9] MUST have a TYPE_SIGNIFICANT_MOTION sensor which:
    • MUST have a power consumption not worse than 0.5 mW when device is static and 1.5 mW when device is moving.
  • [C-2-10] MUST have a TYPE_STEP_DETECTOR sensor which:
    • MUST implement a non-wake-up form of this sensor with a buffering capability of at least 100 sensor events.
    • MUST have a power consumption not worse than 0.5 mW when device is static and 1.5 mW when device is moving.
    • MUST have a batching power consumption not worse than 4 mW.
  • [C-2-11] MUST have a TYPE_STEP_COUNTER sensor which:
    • MUST have a power consumption not worse than 0.5 mW when device is static and 1.5 mW when device is moving.
  • [C-2-12] MUST have a TILT_DETECTOR sensor which:
    • MUST have a power consumption not worse than 0.5 mW when device is static and 1.5 mW when device is moving.
  • [C-2-13] The event timestamp of the same physical event reported by the Accelerometer, Gyroscope, and Magnetometer MUST be within 2.5 milliseconds of each other. The event timestamp of the same physical event reported by the Accelerometer and Gyroscope SHOULD be within 0.25 milliseconds of each other.
  • [C-2-14] MUST have Gyroscope sensor event timestamps on the same time base as the camera subsystem and within 1 milliseconds of error.
  • [C-2-15] MUST deliver samples to applications within 5 milliseconds from the time when the data is available on any of the above physical sensors to the application.
  • [C-2-16] MUST NOT have a power consumption higher than 0.5 mW when device is static and 2.0 mW when device is moving when any combination of the following sensors are enabled:
    • SENSOR_TYPE_SIGNIFICANT_MOTION
    • SENSOR_TYPE_STEP_DETECTOR
    • SENSOR_TYPE_STEP_COUNTER
    • SENSOR_TILT_DETECTORS
  • [C-2-17] MAY have a TYPE_PROXIMITY sensor, but if present MUST have a minimum buffer capability of 100 sensor events.

Note that all power consumption requirements in this section do not include the power consumption of the Application Processor. It is inclusive of the power drawn by the entire sensor chain—the sensor, any supporting circuitry, any dedicated sensor processing system, etc.

If device implementations include direct sensor support, they:

  • [C-3-1] MUST correctly declare support of direct channel types and direct report rates level through the isDirectChannelTypeSupported and getHighestDirectReportRateLevel API.
  • [C-3-2] MUST support at least one of the two sensor direct channel types for all sensors that declare support for sensor direct channel.
  • SHOULD support event reporting through sensor direct channel for primary sensor (non-wakeup variant) of the following types:
    • TYPE_ACCELEROMETER
    • TYPE_ACCELEROMETER_UNCALIBRATED
    • TYPE_GYROSCOPE
    • TYPE_GYROSCOPE_UNCALIBRATED
    • TYPE_MAGNETIC_FIELD
    • TYPE_MAGNETIC_FIELD_UNCALIBRATED

7.3.10. Capteurs biométriques

7.3.10.1. Fingerprint Sensors

If device implementations include a secure lock screen, they:

  • SHOULD include a fingerprint sensor.

If device implementations include a fingerprint sensor and make the sensor available to third-party apps, they:

  • [C-1-1] MUST declare support for the android.hardware.fingerprint feature.
  • [C-1-2] MUST fully implement the corresponding API as described in the Android SDK documentation.
  • [C-1-3] MUST have a false acceptance rate not higher than 0.002%.
  • [SR] Are STRONGLY RECOMMENDED to have a spoof and imposter acceptance rate not higher than 7%.
  • [C-1-4] MUST disclose that this mode may be less secure than a strong PIN, pattern, or password and clearly enumerate the risks of enabling it, if the spoof and imposter acceptance rates are higher than 7%.
  • [C-1-5] MUST rate limit attempts for at least 30 seconds after five false trials for fingerprint verification.
  • [C-1-6] MUST have a hardware-backed keystore implementation, and perform the fingerprint matching in a Trusted Execution Environment (TEE) or on a chip with a secure channel to the TEE.
  • [C-1-7] MUST have all identifiable fingerprint data encrypted and cryptographically authenticated such that they cannot be acquired, read or altered outside of the TEE, or a chip with a secure channel to the TEE as documented in the implementation guidelines on the Android Open Source Project site.
  • [C-1-8] MUST prevent adding a fingerprint without first establishing a chain of trust by having the user confirm existing or add a new device credential (PIN/pattern/password) that's secured by TEE; the Android Open Source Project implementation provides the mechanism in the framework to do so.
  • [C-1-9] MUST NOT enable 3rd-party applications to distinguish between individual fingerprints.
  • [C-1-10] MUST honor the DevicePolicyManager.KEYGUARD_DISABLE_FINGERPRINT flag.
  • [C-1-11] MUST, when upgraded from a version earlier than Android 6.0, have the fingerprint data securely migrated to meet the above requirements or removed.
  • [C-1-12] MUST completely remove all identifiable fingerprint data for a user when the user's account is removed (including via a factory reset).
  • [C-1-13] MUST not allow unencrypted access to identifiable fingerprint data or any data derived from it (such as embeddings) to the Application Processor.
  • [SR] Are STRONGLY RECOMMENDED to have a false rejection rate of less than 10%, as measured on the device.
  • [SR] Are STRONGLY RECOMMENDED to have a latency below 1 second, measured from when the fingerprint sensor is touched until the screen is unlocked, for one enrolled finger.
  • SHOULD use the Android Fingerprint icon provided in the Android Open Source Project.
7.3.10.2. Other Biometric Sensors

If device implementations include one or more non-fingerprint-based-biometric sensors and make them available to third-party apps they:

  • [C-1-1] MUST have a false acceptance rate not higher than 0.002%.
  • [C-SR] Are STRONGLY RECOMMENDED to have a spoof and imposter acceptance rate not higher than 7%.
  • [C-1-2] MUST disclose that this mode may be less secure than a strong PIN, pattern, or password and clearly enumerate the risks of enabling it, if the spoof and imposter acceptance rates are higher than 7%.
  • [C-1-3] MUST rate limit attempts for at least 30 seconds after five false trials for biometric verification - where a false trial is one with an adequate capture quality (ACQUIRED_GOOD) that does not match an enrolled biometric
  • [C-1-4] MUST have a hardware-backed keystore implementation, and perform the biometric matching in a TEE or on a chip with a secure channel to the TEE.
  • [C-1-5] MUST have all identifiable data encrypted and cryptographically authenticated such that they cannot be acquired, read or altered outside of the TEE, or a chip with a secure channel to the TEE as documented in the implementation guidelines on the Android Open Source Project site.
  • [C-1-6] MUST prevent adding new biometrics without first establishing a chain of trust by having the user confirm existing or add a new device credential (PIN/pattern/password) that's secured by TEE; the Android Open Source Project implementation provides the mechanism in the framework to do so.
  • [C-1-7] MUST NOT enable third-party applications to distinguish between biometric enrollments.
  • [C-1-8] MUST honor the individual flag for that biometric (ie: DevicePolicyManager.KEYGUARD_DISABLE_FINGERPRINT , DevicePolicymanager.KEYGUARD_DISABLE_FACE , or DevicePolicymanager.KEYGUARD_DISABLE_IRIS ).
  • [C-1-9] MUST completely remove all identifiable biometric data for a user when the user's account is removed (including via a factory reset).
  • [C-1-10] MUST not allow unencrypted access to identifiable biometric data or any data derived from it (such as embeddings) to the Application Processor outside the context of the TEE.
  • [C-SR] Are STRONGLY RECOMMENDED to have a false rejection rate of less than 10%, as measured on the device.
  • [C-SR] Are STRONGLY RECOMMENDED to have a latency below 1 second, measured from when the biometric is detected, until the screen is unlocked, for each enrolled biometric.

7.3.11. Android Automotive-only sensors

Automotive-specific sensors are defined in the android.car.CarSensorManager API .

7.3.11.1. Équipement actuel

See Section 2.5.1 for device-specific requirements.

7.3.11.2. Day Night Mode

See Section 2.5.1 for device-specific requirements.

7.3.11.3. Statut de conduite

This requirement is deprecated.

7.3.11.4. Wheel Speed

See Section 2.5.1 for device-specific requirements.

7.3.11.5. Frein à main

See Section 2.5.1 for device-specific requirements.

7.3.12. Pose Sensor

Implémentations d'appareils :

  • MAY support pose sensor with 6 degrees of freedom.

If device implementations support pose sensor with 6 degrees of freedom, they:

  • [C-1-1] MUST implement and report TYPE_POSE_6DOF sensor.
  • [C-1-2] MUST be more accurate than the rotation vector alone.

7.4. Connectivité des données

7.4.1. Téléphonie

“Telephony” as used by the Android APIs and this document refers specifically to hardware related to placing voice calls and sending SMS messages via a GSM or CDMA network. While these voice calls may or may not be packet-switched, they are for the purposes of Android considered independent of any data connectivity that may be implemented using the same network. In other words, the Android “telephony” functionality and APIs refer specifically to voice calls and SMS. For instance, device implementations that cannot place calls or send/receive SMS messages are not considered a telephony device, regardless of whether they use a cellular network for data connectivity.

  • Android MAY be used on devices that do not include telephony hardware. That is, Android is compatible with devices that are not phones.

If device implementations include GSM or CDMA telephony, they:

  • [C-1-1] MUST declare the android.hardware.telephony feature flag and other sub-feature flags according to the technology.
  • [C-1-2] MUST implement full support for the API for that technology.

If device implementations do not include telephony hardware, they:

  • [C-2-1] MUST implement the full APIs as no-ops.
7.4.1.1. Number Blocking Compatibility

If device implementations report the android.hardware.telephony feature , they:

  • [C-1-1] MUST include number blocking support
  • [C-1-2] MUST fully implement BlockedNumberContract and the corresponding API as described in the SDK documentation.
  • [C-1-3] MUST block all calls and messages from a phone number in 'BlockedNumberProvider' without any interaction with apps. The only exception is when number blocking is temporarily lifted as described in the SDK documentation.
  • [C-1-4] MUST NOT write to the platform call log provider for a blocked call.
  • [C-1-5] MUST NOT write to the Telephony provider for a blocked message.
  • [C-1-6] MUST implement a blocked numbers management UI, which is opened with the intent returned by TelecomManager.createManageBlockedNumbersIntent() method.
  • [C-1-7] MUST NOT allow secondary users to view or edit the blocked numbers on the device as the Android platform assumes the primary user to have full control of the telephony services, a single instance, on the device. All blocking related UI MUST be hidden for secondary users and the blocked list MUST still be respected.
  • SHOULD migrate the blocked numbers into the provider when a device updates to Android 7.0.
7.4.1.2. Telecom API

If device implementations report android.hardware.telephony , they:

  • [C-1-1] MUST support the ConnectionService APIs described in the SDK .
  • [C-1-2] MUST display a new incoming call and provide user affordance to accept or reject the incoming call when the user is on an ongoing call that is made by a third-party app that does not support the hold feature specified via CAPABILITY_SUPPORT_HOLD .
  • [C-SR] Are STRONGLY RECOMMENDED to notify the user that answering an incoming call will drop an ongoing call.

    The AOSP implementation meets these requirements by a heads-up notification which indicates to the user that answering an incoming call will cause the other call to be dropped.

  • [C-SR] Are STRONGLY RECOMMENDED to preload the default dialer app that shows a call log entry and the name of a third-party app in its call log when the third-party app sets the EXTRA_LOG_SELF_MANAGED_CALLS extras key on its PhoneAccount to true .

  • [C-SR] Are STRONGLY RECOMMENDED to handle the audio headset's KEYCODE_MEDIA_PLAY_PAUSE and KEYCODE_HEADSETHOOK events for the android.telecom APIs as below:

7.4.2. IEEE 802.11 (Wi-Fi)

Implémentations d'appareils :

  • SHOULD include support for one or more forms of 802.11.

If device implementations include support for 802.11 and expose the functionality to a third-party application, they:

  • [C-1-1] MUST implement the corresponding Android API.
  • [C-1-2] MUST report the hardware feature flag android.hardware.wifi .
  • [C-1-3] MUST implement the multicast API as described in the SDK documentation.
  • [C-1-4] MUST support multicast DNS (mDNS) and MUST NOT filter mDNS packets (224.0.0.251) at any time of operation including:
    • Even when the screen is not in an active state.
    • For Android Television device implementations, even when in standby power states.
  • [C-1-5] MUST NOT treat the WifiManager.enableNetwork() API method call as a sufficient indication to switch the currently active Network that is used by default for application traffic and is returned by ConnectivityManager API methods such as getActiveNetwork and registerDefaultNetworkCallback . In other words, they MAY only disable the Internet access provided by any other network provider (eg mobile data) if they successfully validate that the Wi-Fi network is providing Internet access.
  • [C-SR] Are STRONGLY RECOMMENDED, when the ConnectivityManager.reportNetworkConnectivity() API method is called, to re-evaluate the Internet access on the Network and, once the evaluation determines that the current Network no longer provides Internet access, switch to any other available network (eg mobile data) that provides Internet access.
  • [C-SR] Are STRONGLY RECOMMENDED to randomize the source MAC address and sequence number of probe request frames, once at the beginning of each scan, while STA is disconnected.
    • Each group of probe request frames comprising one scan should use one consistent MAC address (SHOULD NOT randomize MAC address halfway through a scan).
    • Probe request sequence number should iterate as normal (sequentially) between the probe requests in a scan.
    • Probe request sequence number should randomize between the last probe request of a scan and the first probe request of the next scan.
  • [C-SR] Are STRONGLY RECOMMENDED, while STA is disconnected, to allow only the following elements in probe request frames:
    • SSID Parameter Set (0)
    • DS Parameter Set (3)

If device implementations support Wi-Fi and use Wi-Fi for location scanning, they:

7.4.2.1. Wi-Fi Direct

Implémentations d'appareils :

  • SHOULD include support for Wi-Fi Direct (Wi-Fi peer-to-peer).

If device implementations include support for Wi-Fi Direct, they:

  • [C-1-1] MUST implement the corresponding Android API as described in the SDK documentation.
  • [C-1-2] MUST report the hardware feature android.hardware.wifi.direct .
  • [C-1-3] MUST support regular Wi-Fi operation.
  • [C-1-4] MUST support Wi-Fi and Wi-Fi Direct operations concurrently.

Implémentations d'appareils :

If device implementations include support for TDLS and TDLS is enabled by the WiFiManager API, they:

  • [C-1-1] MUST declare support for TDLS through WifiManager.isTdlsSupported .
  • SHOULD use TDLS only when it is possible AND beneficial.
  • SHOULD have some heuristic and NOT use TDLS when its performance might be worse than going through the Wi-Fi access point.
7.4.2.3. Wi-Fi Aware

Implémentations d'appareils :

If device implementations include support for Wi-Fi Aware and expose the functionality to third-party apps, then they:

  • [C-1-1] MUST implement the WifiAwareManager APIs as described in the SDK documentation .
  • [C-1-2] MUST declare the android.hardware.wifi.aware feature flag.
  • [C-1-3] MUST support Wi-Fi and Wi-Fi Aware operations concurrently.
  • [C-1-4] MUST randomize the Wi-Fi Aware management interface address at intervals no longer than 30 minutes and whenever Wi-Fi Aware is enabled.

If device implementations include support for Wi-Fi Aware and Wi-Fi Location as described in Section 7.4.2.5 and exposes these functionalities to third-party apps, then they:

7.4.2.4. Wi-Fi Passpoint

Implémentations d'appareils :

If device implementations include support for Wi-Fi Passpoint, they:

  • [C-1-1] MUST implement the Passpoint related WifiManager APIs as described in the SDK documentation .
  • [C-1-2] MUST support IEEE 802.11u standard, specifically related to Network Discovery and Selection, such as Generic Advertisement Service (GAS) and Access Network Query Protocol (ANQP).

Conversely if device implementations do not include support for Wi-Fi Passpoint:

  • [C-2-1] The implementation of the Passpoint related WifiManager APIs MUST throw an UnsupportedOperationException .
7.4.2.5. Wi-Fi Location (Wi-Fi Round Trip Time - RTT)

Implémentations d'appareils :

If device implementations include support for Wi-Fi Location and expose the functionality to third-party apps, then they:

  • [C-1-1] MUST implement the WifiRttManager APIs as described in the SDK documentation .
  • [C-1-2] MUST declare the android.hardware.wifi.rtt feature flag.
  • [C-1-3] MUST randomize the source MAC address for each RTT burst which is executed while the Wi-Fi interface on which the RTT is being executed is not associated to an Access Point.

7.4.3. Bluetooth

If device implementations support Bluetooth Audio profile, they:

  • SHOULD support Advanced Audio Codecs and Bluetooth Audio Codecs (eg LDAC).

If device implementations support HFP, A2DP and AVRCP, they:

  • SHOULD support at least 5 total connected devices.

If device implementations declare android.hardware.vr.high_performance feature, they:

  • [C-1-1] MUST support Bluetooth 4.2 and Bluetooth LE Data Length Extension.

Android includes support for Bluetooth and Bluetooth Low Energy .

If device implementations include support for Bluetooth and Bluetooth Low Energy, they:

  • [C-2-1] MUST declare the relevant platform features ( android.hardware.bluetooth and android.hardware.bluetooth_le respectively) and implement the platform APIs.
  • SHOULD implement relevant Bluetooth profiles such as A2DP, AVRCP, OBEX, HFP, etc. as appropriate for the device.

If device implementations include support for Bluetooth Low Energy, they:

  • [C-3-1] MUST declare the hardware feature android.hardware.bluetooth_le .
  • [C-3-2] MUST enable the GATT (generic attribute profile) based Bluetooth APIs as described in the SDK documentation and android.bluetooth .
  • [C-3-3] MUST report the correct value for BluetoothAdapter.isOffloadedFilteringSupported() to indicate whether the filtering logic for the ScanFilter API classes is implemented.
  • [C-3-4] MUST report the correct value for BluetoothAdapter.isMultipleAdvertisementSupported() to indicate whether Low Energy Advertising is supported.
  • SHOULD support offloading of the filtering logic to the bluetooth chipset when implementing the ScanFilter API .
  • SHOULD support offloading of the batched scanning to the bluetooth chipset.
  • SHOULD support multi advertisement with at least 4 slots.

  • [SR] STRONGLY RECOMMENDED to implement a Resolvable Private Address (RPA) timeout no longer than 15 minutes and rotate the address at timeout to protect user privacy.

If device implementations support Bluetooth LE and use Bluetooth LE for location scanning, they:

  • [C-4-1] MUST provide a user affordance to enable/disable the value read through the System API BluetoothAdapter.isBleScanAlwaysAvailable() .

7.4.4. Near Field Communications

Implémentations d'appareils :

  • SHOULD include a transceiver and related hardware for Near-Field Communications (NFC).
  • [C-0-1] MUST implement android.nfc.NdefMessage and android.nfc.NdefRecord APIs even if they do not include support for NFC or declare the android.hardware.nfc feature as the classes represent a protocol-independent data representation format .

If device implementations include NFC hardware and plan to make it available to third-party apps, they:

  • [C-1-1] MUST report the android.hardware.nfc feature from the android.content.pm.PackageManager.hasSystemFeature() method .
  • MUST be capable of reading and writing NDEF messages via the following NFC standards as below:
  • [C-1-2] MUST be capable of acting as an NFC Forum reader/writer (as defined by the NFC Forum technical specification NFCForum-TS-DigitalProtocol-1.0) via the following NFC standards:
    • NfcA (ISO14443-3A)
    • NfcB (ISO14443-3B)
    • NfcF (JIS X 6319-4)
    • IsoDep (ISO 14443-4)
    • NFC Forum Tag Types 1, 2, 3, 4, 5 (defined by the NFC Forum)
  • [SR] STRONGLY RECOMMENDED to be capable of reading and writing NDEF messages as well as raw data via the following NFC standards. Note that while the NFC standards are stated as STRONGLY RECOMMENDED, the Compatibility Definition for a future version is planned to change these to MUST. These standards are optional in this version but will be required in future versions. Existing and new devices that run this version of Android are very strongly encouraged to meet these requirements now so they will be able to upgrade to the future platform releases.

  • [C-1-3] MUST be capable of transmitting and receiving data via the following peer-to-peer standards and protocols:

    • ISO 18092
    • LLCP 1.2 (defined by the NFC Forum)
    • SDP 1.0 (defined by the NFC Forum)
    • NDEF Push Protocol
    • SNEP 1.0 (defined by the NFC Forum)
  • [C-1-4] MUST include support for Android Beam and SHOULD enable Android Beam by default.
  • [C-1-5] MUST be able to send and receive using Android Beam, when Android Beam is enabled or another proprietary NFC P2p mode is turned on.
  • [C-1-6] MUST implement the SNEP default server. Valid NDEF messages received by the default SNEP server MUST be dispatched to applications using the android.nfc.ACTION_NDEF_DISCOVERED intent. Disabling Android Beam in settings MUST NOT disable dispatch of incoming NDEF message.
  • [C-1-7] MUST honor the android.settings.NFCSHARING_SETTINGS intent to show NFC sharing settings .
  • [C-1-8] MUST implement the NPP server. Messages received by the NPP server MUST be processed the same way as the SNEP default server.
  • [C-1-9] MUST implement a SNEP client and attempt to send outbound P2P NDEF to the default SNEP server when Android Beam is enabled. If no default SNEP server is found then the client MUST attempt to send to an NPP server.
  • [C-1-10] MUST allow foreground activities to set the outbound P2P NDEF message using android.nfc.NfcAdapter.setNdefPushMessage , and android.nfc.NfcAdapter.setNdefPushMessageCallback , and android.nfc.NfcAdapter.enableForegroundNdefPush .
  • SHOULD use a gesture or on-screen confirmation, such as 'Touch to Beam', before sending outbound P2P NDEF messages.
  • [C-1-11] MUST support NFC Connection handover to Bluetooth when the device supports Bluetooth Object Push Profile.
  • [C-1-12] MUST support connection handover to Bluetooth when using android.nfc.NfcAdapter.setBeamPushUris , by implementing the “ Connection Handover version 1.2 ” and “ Bluetooth Secure Simple Pairing Using NFC version 1.0 ” specs from the NFC Forum. Such an implementation MUST implement the handover LLCP service with service name “urn:nfc:sn:handover” for exchanging the handover request/select records over NFC, and it MUST use the Bluetooth Object Push Profile for the actual Bluetooth data transfer. For legacy reasons (to remain compatible with Android 4.1 devices), the implementation SHOULD still accept SNEP GET requests for exchanging the handover request/select records over NFC. However an implementation itself SHOULD NOT send SNEP GET requests for performing connection handover.
  • [C-1-13] MUST poll for all supported technologies while in NFC discovery mode.
  • SHOULD be in NFC discovery mode while the device is awake with the screen active and the lock-screen unlocked.
  • SHOULD be capable of reading the barcode and URL (if encoded) of Thinfilm NFC Barcode products.

Note that publicly available links are not available for the JIS, ISO, and NFC Forum specifications cited above.

Android includes support for NFC Host Card Emulation (HCE) mode.

If device implementations include an NFC controller chipset capable of HCE (for NfcA and/or NfcB) and support Application ID (AID) routing, they:

  • [C-2-1] MUST report the android.hardware.nfc.hce feature constant.
  • [C-2-2] MUST support NFC HCE APIs as defined in the Android SDK.

If device implementations include an NFC controller chipset capable of HCE for NfcF, and implement the feature for third-party applications, they:

  • [C-3-1] MUST report the android.hardware.nfc.hcef feature constant.
  • [C-3-2] MUST implement the NfcF Card Emulation APIs as defined in the Android SDK.

If device implementations include general NFC support as described in this section and support MIFARE technologies (MIFARE Classic, MIFARE Ultralight, NDEF on MIFARE Classic) in the reader/writer role, they:

  • [C-4-1] MUST implement the corresponding Android APIs as documented by the Android SDK.
  • [C-4-2] MUST report the feature com.nxp.mifare from the android.content.pm.PackageManager.hasSystemFeature () method. Note that this is not a standard Android feature and as such does not appear as a constant in the android.content.pm.PackageManager class.

7.4.5. Capacité réseau minimale

Implémentations d'appareils :

  • [C-0-1] MUST include support for one or more forms of data networking. Specifically, device implementations MUST include support for at least one data standard capable of 200 Kbit/sec or greater. Examples of technologies that satisfy this requirement include EDGE, HSPA, EV-DO, 802.11g, Ethernet and Bluetooth PAN.
  • SHOULD also include support for at least one common wireless data standard, such as 802.11 (Wi-Fi), when a physical networking standard (such as Ethernet) is the primary data connection.
  • MAY implement more than one form of data connectivity.
  • [C-0-2] MUST include an IPv6 networking stack and support IPv6 communication using the managed APIs, such as java.net.Socket and java.net.URLConnection , as well as the native APIs, such as AF_INET6 sockets.
  • [C-0-3] MUST enable IPv6 by default.
  • MUST ensure that IPv6 communication is as reliable as IPv4, for example:
    • [C-0-4] MUST maintain IPv6 connectivity in doze mode.
    • [C-0-5] Rate-limiting MUST NOT cause the device to lose IPv6 connectivity on any IPv6-compliant network that uses RA lifetimes of at least 180 seconds.
  • [C-0-6] MUST provide third-party applications with direct IPv6 connectivity to the network when connected to an IPv6 network, without any form of address or port translation happening locally on the device. Both managed APIs such as Socket#getLocalAddress or Socket#getLocalPort ) and NDK APIs such as getsockname() or IPV6_PKTINFO MUST return the IP address and port that is actually used to send and receive packets on the network.

The required level of IPv6 support depends on the network type, as shown in the following requirements.

If device implementations support Wi-Fi, they:

  • [C-1-1] MUST support dual-stack and IPv6-only operation on Wi-Fi.

If device implementations support Ethernet, they:

  • [C-2-1] MUST support dual-stack operation on Ethernet.

If device implementations support Cellular data, they:

  • SHOULD support IPv6 operation (IPv6-only and possibly dual-stack) on cellular.

If device implementations support more than one network type (eg, Wi-Fi and cellular data), they:

  • [C-3-1] MUST simultaneously meet the above requirements on each network when the device is simultaneously connected to more than one network type.

7.4.6. Sync Settings

Implémentations d'appareils :

7.4.7. Data Saver

If device implementations include a metered connection, they are:

  • [SR] STRONGLY RECOMMENDED to provide the data saver mode.

If device implementations provide the data saver mode, they:

If device implementations do not provide the data saver mode, they:

  • [C-2-1] MUST return the value RESTRICT_BACKGROUND_STATUS_DISABLED for ConnectivityManager.getRestrictBackgroundStatus()
  • [C-2-2] MUST NOT broadcast ConnectivityManager.ACTION_RESTRICT_BACKGROUND_CHANGED .
  • [C-2-3] MUST have an activity that handles the Settings.ACTION_IGNORE_BACKGROUND_DATA_RESTRICTIONS_SETTINGS intent but MAY implement it as a no-op.

7.4.8. Secure Elements

If device implementations support Open Mobile API capable secure elements and make them available to 3rd-party apps, they:

7.5. Appareils photo

If device implementations include at least one camera, they:

  • [C-1-1] MUST declare the android.hardware.camera.any feature flag.
  • [C-1-2] MUST be possible for an application to simultaneously allocate 3 RGBA_8888 bitmaps equal to the size of the images produced by the largest-resolution camera sensor on the device, while camera is open for the purpose of basic preview and still capturer.

7.5.1. Caméra orientée vers l'arrière

A rear-facing camera is a camera located on the side of the device opposite the display; that is, it images scenes on the far side of the device, like a traditional camera.

Implémentations d'appareils :

  • SHOULD include a rear-facing camera.

If device implementations include at least one rear-facing camera, they:

  • [C-1-1] MUST report the feature flag android.hardware.camera and android.hardware.camera.any .
  • [C-1-2] MUST have a resolution of at least 2 megapixels.
  • SHOULD have either hardware auto-focus or software auto-focus implemented in the camera driver (transparent to application software).
  • MAY have fixed-focus or EDOF (extended depth of field) hardware.
  • MAY include a flash.

If the camera includes a flash:

  • [C-2-1] the flash lamp MUST NOT be lit while an android.hardware.Camera.PreviewCallback instance has been registered on a Camera preview surface, unless the application has explicitly enabled the flash by enabling the FLASH_MODE_AUTO or FLASH_MODE_ON attributes of a Camera.Parameters OBJET. Notez que cette contrainte ne s'applique pas à l'application de caméra système intégrée de l'appareil, mais uniquement aux applications tierces à l'aide de Camera.PreviewCallback .

7.5.2. Avant face à la caméra

A front-facing camera is a camera located on the same side of the device as the display; that is, a camera typically used to image the user, such as for video conferencing and similar applications.

Implémentations d'appareils :

  • MAY include a front-facing camera.

If device implementations include at least one front-facing camera, they:

  • [C-1-1] MUST report the feature flag android.hardware.camera.any and android.hardware.camera.front .
  • [C-1-2] MUST have a resolution of at least VGA (640x480 pixels).
  • [C-1-3] MUST NOT use a front-facing camera as the default for the Camera API and MUST NOT configure the API to treat a front-facing camera as the default rear-facing camera, even if it is the only camera on the device.
  • [C-1-4] The camera preview MUST be mirrored horizontally relative to the orientation specified by the application when the current application has explicitly requested that the Camera display be rotated via a call to the android.hardware.Camera.setDisplayOrientation() method . Conversely, the preview MUST be mirrored along the device's default horizontal axis when the current application does not explicitly request that the Camera display be rotated via a call to the android.hardware.Camera.setDisplayOrientation() method.
  • [C-1-5] MUST NOT mirror the final captured still image or video streams returned to application callbacks or committed to media storage.
  • [C-1-6] MUST mirror the image displayed by the postview in the same manner as the camera preview image stream.
  • MAY include features (such as auto-focus, flash, etc.) available to rear-facing cameras as described in section 7.5.1 .

If device implementations are capable of being rotated by user (such as automatically via an accelerometer or manually via user input):

  • [C-2-1] The camera preview MUST be mirrored horizontally relative to the device's current orientation.

7.5.3. External Camera

Implémentations d'appareils :

  • MAY include support for an external camera that is not necessarily always connected.

If device implementations include support for an external camera, they:

  • [C-1-1] MUST declare the platform feature flag android.hardware.camera.external and android.hardware camera.any .
  • [C-1-2] MUST support USB Video Class (UVC 1.0 or higher) if the external camera connects through the USB host port.
  • [C-1-3] MUST pass camera CTS tests with a physical external camera device connected. Details of camera CTS testing are available at source.android.com .
  • SHOULD support video compressions such as MJPEG to enable transfer of high-quality unencoded streams (ie raw or independently compressed picture streams).
  • MAY support multiple cameras.
  • MAY support camera-based video encoding.

If camera-based video encoding is supported:

  • [C-2-1] A simultaneous unencoded / MJPEG stream (QVGA or greater resolution) MUST be accessible to the device implementation.

7.5.4. Comportement de l'API de la caméra

Android includes two API packages to access the camera, the newer android.hardware.camera2 API expose lower-level camera control to the app, including efficient zero-copy burst/streaming flows and per-frame controls of exposure, gain, white balance gains, color conversion, denoising, sharpening, and more.

The older API package, android.hardware.Camera , is marked as deprecated in Android 5.0 but as it should still be available for apps to use. Android device implementations MUST ensure the continued support of the API as described in this section and in the Android SDK.

All features that are common between the deprecated android.hardware.Camera class and the newer android.hardware.camera2 package MUST have equivalent performance and quality in both APIs. For example, with equivalent settings, autofocus speed and accuracy must be identical, and the quality of captured images must be the same. Features that depend on the different semantics of the two APIs are not required to have matching speed or quality, but SHOULD match as closely as possible.

Device implementations MUST implement the following behaviors for the camera-related APIs, for all available cameras. Implémentations d'appareils :

  • [C-0-1] MUST use android.hardware.PixelFormat.YCbCr_420_SP for preview data provided to application callbacks when an application has never called android.hardware.Camera.Parameters.setPreviewFormat(int) .
  • [C-0-2] MUST further be in the NV21 encoding format when an application registers an android.hardware.Camera.PreviewCallback instance and the system calls the onPreviewFrame() method and the preview format is YCbCr_420_SP, the data in the byte[] passed into onPreviewFrame() . That is, NV21 MUST be the default.
  • [C-0-3] MUST support the YV12 format (as denoted by the android.graphics.ImageFormat.YV12 constant) for camera previews for both front- and rear-facing cameras for android.hardware.Camera . (The hardware video encoder and camera may use any native pixel format, but the device implementation MUST support conversion to YV12.)
  • [C-0-4] MUST support the android.hardware.ImageFormat.YUV_420_888 and android.hardware.ImageFormat.JPEG formats as outputs through the android.media.ImageReader API for android.hardware.camera2 devices that advertise REQUEST_AVAILABLE_CAPABILITIES_BACKWARD_COMPATIBLE capability in android.request.availableCapabilities .
  • [C-0-5] MUST still implement the full Camera API included in the Android SDK documentation, regardless of whether the device includes hardware autofocus or other capabilities. For instance, cameras that lack autofocus MUST still call any registered android.hardware.Camera.AutoFocusCallback instances (even though this has no relevance to a non-autofocus camera.) Note that this does apply to front-facing cameras; for instance, even though most front-facing cameras do not support autofocus, the API callbacks must still be “faked” as described.
  • [C-0-6] MUST recognize and honor each parameter name defined as a constant on the android.hardware.Camera.Parameters class. Conversely, device implementations MUST NOT honor or recognize string constants passed to the android.hardware.Camera.setParameters() method other than those documented as constants on the android.hardware.Camera.Parameters . That is, device implementations MUST support all standard Camera parameters if the hardware allows, and MUST NOT support custom Camera parameter types. For instance, device implementations that support image capture using high dynamic range (HDR) imaging techniques MUST support camera parameter Camera.SCENE_MODE_HDR .
  • [C-0-7] MUST report the proper level of support with the android.info.supportedHardwareLevel property as described in the Android SDK and report the appropriate framework feature flags .
  • [C-0-8] MUST also declare its individual camera capabilities of android.hardware.camera2 via the android.request.availableCapabilities property and declare the appropriate feature flags ; MUST define the feature flag if any of its attached camera devices supports the feature.
  • [C-0-9] MUST broadcast the Camera.ACTION_NEW_PICTURE intent whenever a new picture is taken by the camera and the entry of the picture has been added to the media store.
  • [C-0-10] MUST broadcast the Camera.ACTION_NEW_VIDEO intent whenever a new video is recorded by the camera and the entry of the picture has been added to the media store.
  • [C-SR] Are STRONGLY RECOMMENDED to support a logical camera device that lists capability CameraMetadata.REQUEST_AVAILABLE_CAPABILITIES_LOGICAL_MULTI_CAMERA , for devices with multiple cameras facing the same direction, consisting of each physical camera facing that direction, as long as the physical camera type is supported by the framework and CameraCharacteristics.INFO_SUPPORTED_HARDWARE_LEVEL for the physical cameras is either LIMITED , FULL , or LEVEL_3 .

7.5.5. Orientation de la caméra

If device implementations have a front- or a rear-facing camera, such camera(s):

  • [C-1-1] MUST be oriented so that the long dimension of the camera aligns with the screen's long dimension. That is, when the device is held in the landscape orientation, cameras MUST capture images in the landscape orientation. This applies regardless of the device's natural orientation; that is, it applies to landscape-primary devices as well as portrait-primary devices.

7.6. Mémoire et stockage

7.6.1. Mémoire et stockage minimum

Implémentations d'appareils :

  • [C-0-1] MUST include a Download Manager that applications MAY use to download data files and they MUST be capable of downloading individual files of at least 100MB in size to the default “cache” location.

7.6.2. Stockage partagé des applications

Implémentations d'appareils :

  • [C-0-1] MUST offer storage to be shared by applications, also often referred as “shared external storage”, "application shared storage" or by the Linux path "/sdcard" it is mounted on.
  • [C-0-2] MUST be configured with shared storage mounted by default, in other words “out of the box”, regardless of whether the storage is implemented on an internal storage component or a removable storage medium (eg Secure Digital card slot ).
  • [C-0-3] MUST mount the application shared storage directly on the Linux path sdcard or include a Linux symbolic link from sdcard to the actual mount point.
  • [C-0-4] MUST enforce the android.permission.WRITE_EXTERNAL_STORAGE permission on this shared storage as documented in the SDK. Le stockage partagé doit autrement être écrit par toute application qui obtient cette autorisation.

Device implementations MAY meet the above requirements using either of the following:

  • User-accessible removable storage, such as a Secure Digital (SD) card slot.
  • A portion of the internal (non-removable) storage as implemented in the Android Open Source Project (AOSP).

If device implementations use removable storage to satisfy the above requirements, they:

  • [C-1-1] MUST implement a toast or pop-up user interface warning the user when there is no storage medium inserted in the slot.
  • [C-1-2] MUST include a FAT-formatted storage medium (eg SD card) or show on the box and other material available at time of purchase that the storage medium has to be purchased separately.

If device implementations use a portion of the non-removable storage to satisfy the above requirements, they:

  • SHOULD use the AOSP implementation of the internal application shared storage.
  • MAY share the storage space with the application private data.

If device implementations include multiple shared storage paths (such as both an SD card slot and shared internal storage), they:

  • [C-2-1] MUST allow only preinstalled and privileged Android applications with the WRITE_EXTERNAL_STORAGE permission to write to the secondary external storage, except when writing to their package-specific directories or within the URI returned by firing the ACTION_OPEN_DOCUMENT_TREE intent.

If device implementations have a USB port with USB peripheral mode support, they:

  • [C-3-1] MUST provide a mechanism to access the data on the application shared storage from a host computer.
  • SHOULD expose content from both storage paths transparently through Android's media scanner service and android.provider.MediaStore .
  • MAY use USB mass storage, but SHOULD use Media Transfer Protocol to satisfy this requirement.

If device implementations have a USB port with USB peripheral mode and support Media Transfer Protocol, they:

  • SHOULD be compatible with the reference Android MTP host, Android File Transfer .
  • SHOULD report a USB device class of 0x00.
  • SHOULD report a USB interface name of 'MTP'.

7.6.3. Adoptable Storage

If the device is expected to be mobile in nature unlike Television, device implementations are:

  • [SR] STRONGLY RECOMMENDED to implement the adoptable storage in a long-term stable location, since accidentally disconnecting them can cause data loss/corruption.

If the removable storage device port is in a long-term stable location, such as within the battery compartment or other protective cover, device implementations are:

7.7. USB

If device implementations have a USB port, they:

  • SHOULD support USB peripheral mode and SHOULD support USB host mode.

7.7.1. USB peripheral mode

If device implementations include a USB port supporting peripheral mode:

  • [C-1-1] The port MUST be connectable to a USB host that has a standard type-A or type-C USB port.
  • [C-1-2] MUST report the correct value of iSerialNumber in USB standard device descriptor through android.os.Build.SERIAL .
  • [C-1-3] MUST detect 1.5A and 3.0A chargers per the Type-C resistor standard and MUST detect changes in the advertisement if they support Type-C USB.
  • [SR] The port SHOULD use micro-B, micro-AB or Type-C USB form factor. Existing and new Android devices are STRONGLY RECOMMENDED to meet these requirements so they will be able to upgrade to the future platform releases.
  • [SR] The port SHOULD be located on the bottom of the device (according to natural orientation) or enable software screen rotation for all apps (including home screen), so that the display draws correctly when the device is oriented with the port at bottom . Existing and new Android devices are STRONGLY RECOMMENDED to meet these requirements so they will be able to upgrade to future platform releases.
  • [SR] SHOULD implement support to draw 1.5 A current during HS chirp and traffic as specified in the USB Battery Charging specification, revision 1.2 . Existing and new Android devices are STRONGLY RECOMMENDED to meet these requirements so they will be able to upgrade to the future platform releases.
  • [SR] STRONGLY RECOMMENDED to not support proprietary charging methods that modify Vbus voltage beyond default levels, or alter sink/source roles as such may result in interoperability issues with the chargers or devices that support the standard USB Power Delivery methods. While this is called out as "STRONGLY RECOMMENDED", in future Android versions we might REQUIRE all type-C devices to support full interoperability with standard type-C chargers.
  • [SR] STRONGLY RECOMMENDED to support Power Delivery for data and power role swapping when they support Type-C USB and USB host mode.
  • SHOULD support Power Delivery for high-voltage charging and support for Alternate Modes such as display out.
  • SHOULD implement the Android Open Accessory (AOA) API and specification as documented in the Android SDK documentation.

If device implementations include a USB port and implement the AOA specification, they:

  • [C-2-1] MUST declare support for the hardware feature android.hardware.usb.accessory .
  • [C-2-2] The USB mass storage class MUST include the string "android" at the end of the interface description iInterface string of the USB mass storage
  • SHOULD NOT implement AOAv2 audio documented in the Android Open Accessory Protocol 2.0 documentation. AOAv2 audio is deprecated as of Android version 8.0 (API level 26).

7.7.2. USB host mode

If device implementations include a USB port supporting host mode, they:

  • [C-1-1] MUST implement the Android USB host API as documented in the Android SDK and MUST declare support for the hardware feature android.hardware.usb.host .
  • [C-1-2] MUST implement support to connect standard USB peripherals, in other words, they MUST either:
    • Have an on-device type C port or ship with cable(s) adapting an on-device proprietary port to a standard USB type-C port (USB Type-C device).
    • Have an on-device type A or ship with cable(s) adapting an on-device proprietary port to a standard USB type-A port.
    • Have an on-device micro-AB port, which SHOULD ship with a cable adapting to a standard type-A port.
  • [C-1-3] MUST NOT ship with an adapter converting from USB type A or micro-AB ports to a type-C port (receptacle).
  • [SR] STRONGLY RECOMMENDED to implement the USB audio class as documented in the Android SDK documentation.
  • SHOULD support charging the connected USB peripheral device while in host mode; advertising a source current of at least 1.5A as specified in the Termination Parameters section of the USB Type-C Cable and Connector Specification Revision 1.2 for USB Type-C connectors or using Charging Downstream Port(CDP) output current range as specified in the USB Battery Charging specifications, revision 1.2 for Micro-AB connectors.
  • SHOULD implement and support USB Type-C standards.

If device implementations include a USB port supporting host mode and the USB audio class, they:

  • [C-2-1] MUST support the USB HID class .
  • [C-2-2] MUST support the detection and mapping of the following HID data fields specified in the USB HID Usage Tables and the Voice Command Usage Request to the KeyEvent constants as below:
    • Usage Page (0xC) Usage ID (0x0CD): KEYCODE_MEDIA_PLAY_PAUSE
    • Usage Page (0xC) Usage ID (0x0E9): KEYCODE_VOLUME_UP
    • Usage Page (0xC) Usage ID (0x0EA): KEYCODE_VOLUME_DOWN
    • Usage Page (0xC) Usage ID (0x0CF): KEYCODE_VOICE_ASSIST

If device implementations include a USB port supporting host mode and the Storage Access Framework (SAF), they:

  • [C-3-1] MUST recognize any remotely connected MTP (Media Transfer Protocol) devices and make their contents accessible through the ACTION_GET_CONTENT , ACTION_OPEN_DOCUMENT , and ACTION_CREATE_DOCUMENT intents. .

If device implementations include a USB port supporting host mode and USB Type-C, they:

  • [C-4-1] MUST implement Dual Role Port functionality as defined by the USB Type-C specification (section 4.5.1.3.3).
  • [SR] STRONGLY RECOMMENDED to support DisplayPort, SHOULD support USB SuperSpeed Data Rates, and are STRONGLY RECOMMENDED to support Power Delivery for data and power role swapping.
  • [SR] STRONGLY RECOMMENDED to NOT support Audio Adapter Accessory Mode as described in the Appendix A of the USB Type-C Cable and Connector Specification Revision 1.2 .
  • SHOULD implement the Try.* model that is most appropriate for the device form factor. For example a handheld device SHOULD implement the Try.SNK model.

7.8. l'audio

7.8.1. Microphone

If device implementations include a microphone, they:

  • [C-1-1] MUST report the android.hardware.microphone feature constant.
  • [C-1-2] MUST meet the audio recording requirements in section 5.4 .
  • [C-1-3] MUST meet the audio latency requirements in section 5.6 .
  • [SR] Are STRONGLY RECOMMENDED to support near-ultrasound recording as described in section 7.8.3 .

If device implementations omit a microphone, they:

  • [C-2-1] MUST NOT report the android.hardware.microphone feature constant.
  • [C-2-2] MUST implement the audio recording API at least as no-ops, per section 7 .

7.8.2. Sortie audio

If device implementations include a speaker or an audio/multimedia output port for an audio output peripheral such as a 4 conductor 3.5mm audio jack or USB host mode port using USB audio class , they:

  • [C-1-1] MUST report the android.hardware.audio.output feature constant.
  • [C-1-2] MUST meet the audio playback requirements in section 5.5 .
  • [C-1-3] MUST meet the audio latency requirements in section 5.6 .
  • [SR] STRONGLY RECOMMENDED to support near-ultrasound playback as described in section 7.8.3 .

If device implementations do not include a speaker or audio output port, they:

  • [C-2-1] MUST NOT report the android.hardware.audio.output feature.
  • [C-2-2] MUST implement the Audio Output related APIs as no-ops at least.

For the purposes of this section, an "output port" is a physical interface such as a 3.5mm audio jack, HDMI, or USB host mode port with USB audio class. Support for audio output over radio-based protocols such as Bluetooth, WiFi, or cellular network does not qualify as including an "output port".

7.8.2.1. Analog Audio Ports

In order to be compatible with the headsets and other audio accessories using the 3.5mm audio plug across the Android ecosystem, if device implementations include one or more analog audio ports, they:

  • [C-SR] Are STRONGLY RECOMMENDED to include at least one of the audio port(s) to be a 4 conductor 3.5mm audio jack.

If device implementations have a 4 conductor 3.5mm audio jack, they:

  • [C-1-1] MUST support audio playback to stereo headphones and stereo headsets with a microphone.
  • [C-1-2] MUST support TRRS audio plugs with the CTIA pin-out order.
  • [C-1-3] MUST support the detection and mapping to the keycodes for the following 3 ranges of equivalent impedance between the microphone and ground conductors on the audio plug:
    • 70 ohm or less : KEYCODE_HEADSETHOOK
    • 210-290 ohm : KEYCODE_VOLUME_UP
    • 360-680 ohm : KEYCODE_VOLUME_DOWN
  • [C-1-4] MUST trigger ACTION_HEADSET_PLUG upon a plug insert, but only after all contacts on plug are touching their relevant segments on the jack.
  • [C-1-5] MUST be capable of driving at least 150mV ± 10% of output voltage on a 32 ohm speaker impedance.
  • [C-1-6] MUST have a microphone bias voltage between 1.8V ~ 2.9V.
  • [C-1-7] MUST detect and map to the keycode for the following range of equivalent impedance between the microphone and ground conductors on the audio plug:
    • 110-180 ohm: KEYCODE_VOICE_ASSIST
  • [C-SR] Are STRONGLY RECOMMENDED to support audio plugs with the OMTP pin-out order.
  • [C-SR] Are STRONGLY RECOMMEND to support audio recording from stereo headsets with a microphone.

If device implementations have a 4 conductor 3.5mm audio jack and support a microphone, and broadcast the android.intent.action.HEADSET_PLUG with the extra value microphone set as 1, they:

  • [C-2-1] MUST support the detection of microphone on the plugged in audio accessory.

7.8.3. Near-Ultrasound

Near-Ultrasound audio is the 18.5 kHz to 20 kHz band.

Implémentations d'appareils :

If PROPERTY_SUPPORT_MIC_NEAR_ULTRASOUND is "true", the following requirements MUST be met by the VOICE_RECOGNITION and UNPROCESSED audio sources:

  • [C-1-1] The microphone's mean power response in the 18.5 kHz to 20 kHz band MUST be no more than 15 dB below the response at 2 kHz.
  • [C-1-2] The microphone's unweighted signal to noise ratio over 18.5 kHz to 20 kHz for a 19 kHz tone at -26 dBFS MUST be no lower than 50 dB.

If PROPERTY_SUPPORT_SPEAKER_NEAR_ULTRASOUND is "true":

  • [C-2-1] The speaker's mean response in 18.5 kHz - 20 kHz MUST be no lower than 40 dB below the response at 2 kHz.

7.9. Réalité virtuelle

Android includes APIs and facilities to build "Virtual Reality" (VR) applications including high quality mobile VR experiences. Device implementations MUST properly implement these APIs and behaviors, as detailed in this section.

7.9.1. Virtual Reality Mode

Android includes support for VR Mode , a feature which handles stereoscopic rendering of notifications and disables monocular system UI components while a VR application has user focus.

7.9.2. Virtual Reality Mode - High Performance

If device implementations support VR mode, they:

  • [C-1-1] MUST have at least 2 physical cores.
  • [C-1-2] MUST declare the android.hardware.vr.high_performance feature.
  • [C-1-3] MUST support sustained performance mode.
  • [C-1-4] MUST support OpenGL ES 3.2.
  • [C-1-5] MUST support android.hardware.vulkan.level 0.
  • SHOULD support android.hardware.vulkan.level 1 or higher.
  • [C-1-6] MUST implement EGL_KHR_mutable_render_buffer , EGL_ANDROID_front_buffer_auto_refresh , EGL_ANDROID_get_native_client_buffer , EGL_KHR_fence_sync , EGL_KHR_wait_sync , EGL_IMG_context_priority , EGL_EXT_protected_content , EGL_EXT_image_gl_colorspace , and expose the extensions in the list of available EGL extensions.
  • [C-1-8] MUST implement GL_EXT_multisampled_render_to_texture2 , GL_OVR_multiview , GL_OVR_multiview2 , GL_OVR_multiview_multisampled_render_to_texture , GL_EXT_protected_textures , and expose the extensions in the list of available GL extensions.
  • [C-SR] Are STRONGLY RECOMMENDED to implement GL_EXT_external_buffer , GL_EXT_EGL_image_array , and expose the extensions in the list of available GL extensions.
  • [C-SR] Are STRONGLY RECOMMENDED to support Vulkan 1.1.
  • [C-SR] Are STRONGLY RECOMMENDED to implement VK_ANDROID_external_memory_android_hardware_buffer , VK_GOOGLE_display_timing , VK_KHR_shared_presentable_image , and expose it in the list of available Vulkan extensions.
  • [C-SR] Are STRONGLY RECOMMENDED to expose at least one Vulkan queue family where flags contain both VK_QUEUE_GRAPHICS_BIT and VK_QUEUE_COMPUTE_BIT , and queueCount is at least 2.
  • [C-1-7] The GPU and display MUST be able to synchronize access to the shared front buffer such that alternating-eye rendering of VR content at 60fps with two render contexts will be displayed with no visible tearing artifacts.
  • [C-1-9] MUST implement support for AHardwareBuffer flags AHARDWAREBUFFER_USAGE_GPU_DATA_BUFFER , AHARDWAREBUFFER_USAGE_SENSOR_DIRECT_DATA and AHARDWAREBUFFER_USAGE_PROTECTED_CONTENT as described in the NDK.
  • [C-1-10] MUST implement support for AHardwareBuffer s with any combination of the usage flags AHARDWAREBUFFER_USAGE_GPU_COLOR_OUTPUT , AHARDWAREBUFFER_USAGE_GPU_SAMPLED_IMAGE , AHARDWAREBUFFER_USAGE_PROTECTED_CONTENT for at least the following formats: AHARDWAREBUFFER_FORMAT_R5G6B5_UNORM , AHARDWAREBUFFER_FORMAT_R8G8B8A8_UNORM , AHARDWAREBUFFER_FORMAT_R10G10B10A2_UNORM , AHARDWAREBUFFER_FORMAT_R16G16B16A16_FLOAT .
  • [C-SR] Are STRONGLY RECOMMENDED to support the allocation of AHardwareBuffer s with more than one layer and flags and formats specified in C-1-10.
  • [C-1-11] MUST support H.264 decoding at least 3840 x 2160 at 30fps, compressed to an average of 40Mbps (equivalent to 4 instances of 1920 x1080 at 30 fps-10 Mbps or 2 instances of 1920 x 1080 at 60 fps-20 Mbps).
  • [C-1-12] MUST support HEVC and VP9, MUST be capable of decoding at least 1920 x 1080 at 30 fps compressed to an average of 10 Mbps and SHOULD be capable of decoding 3840 x 2160 at 30 fps-20 Mbps (equivalent to 4 instances of 1920 x 1080 at 30 fps-5 Mbps).
  • [C-1-13] MUST support HardwarePropertiesManager.getDeviceTemperatures API and return accurate values for skin temperature.
  • [C-1-14] MUST have an embedded screen, and its resolution MUST be at least 1920 x 1080.
  • [C-SR] Are STRONGLY RECOMMENDED to have a display resolution of at least 2560 x 1440.
  • [C-1-15] The display MUST update at least 60 Hz while in VR Mode.
  • [C-1-17] The display MUST support a low-persistence mode with ≤ 5 milliseconds persistence, persistence being defined as the amount of time for which a pixel is emitting light.
  • [C-1-18] MUST support Bluetooth 4.2 and Bluetooth LE Data Length Extension section 7.4.3 .
  • [C-1-19] MUST support and properly report Direct Channel Type for all of the following default sensor types:
    • TYPE_ACCELEROMETER
    • TYPE_ACCELEROMETER_UNCALIBRATED
    • TYPE_GYROSCOPE
    • TYPE_GYROSCOPE_UNCALIBRATED
    • TYPE_MAGNETIC_FIELD
    • TYPE_MAGNETIC_FIELD_UNCALIBRATED
  • [C-SR] Are STRONGLY RECOMMENDED to support the TYPE_HARDWARE_BUFFER direct channel type for all Direct Channel Types listed above.
  • [C-1-21] MUST meet the gyroscope, accelerometer, and magnetometer related requirements for android.hardware.hifi_sensors , as specified in section 7.3.9 .
  • [C-SR] Are STRONGLY RECOMMENDED to support the android.hardware.sensor.hifi_sensors feature.
  • [C-1-22] MUST have end-to-end motion to photon latency not higher than 28 milliseconds.
  • [C-SR] Are STRONGLY RECOMMENDED to have end-to-end motion to photon latency not higher than 20 milliseconds.
  • [C-1-23] MUST have first-frame ratio, which is the ratio between the brightness of pixels on the first frame after a transition from black to white and the brightness of white pixels in steady state, of at least 85%.
  • [C-SR] Are STRONGLY RECOMMENDED to have first-frame ratio of at least 90%.
  • MAY provide an exclusive core to the foreground application and MAY support the Process.getExclusiveCores API to return the numbers of the cpu cores that are exclusive to the top foreground application.

If exclusive core is supported, then the core:

  • [C-2-1] MUST not allow any other userspace processes to run on it (except device drivers used by the application), but MAY allow some kernel processes to run as necessary.

8. Performance and Power

Some minimum performance and power criteria are critical to the user experience and impact the baseline assumptions developers would have when developing an app.

8.1. User Experience Consistency

A smooth user interface can be provided to the end user if there are certain minimum requirements to ensure a consistent frame rate and response times for applications and games. Device implementations, depending on the device type, MAY have measurable requirements for the user interface latency and task switching as described in section 2 .

8.2. File I/O Access Performance

Providing a common baseline for a consistent file access performance on the application private data storage ( /data partition) allows app developers to set a proper expectation that would help their software design. Device implementations, depending on the device type, MAY have certain requirements described in section 2 for the following read and write operations:

  • Sequential write performance . Measured by writing a 256MB file using 10MB write buffer.
  • Random write performance . Measured by writing a 256MB file using 4KB write buffer.
  • Sequential read performance . Measured by reading a 256MB file using 10MB write buffer.
  • Random read performance . Measured by reading a 256MB file using 4KB write buffer.

8.3. Power-Saving Modes

If device implementations include features to improve device power management that are included in AOSP or extend the features that are included in AOSP, they:

  • [C-1-1] MUST NOT deviate from the AOSP implementation for the triggering, maintenance, wakeup algorithms and the use of global system settings of App Standby and Doze power-saving modes.
  • [C-1-2] MUST NOT deviate from the AOSP implementation for the use of global settings to manage the throttling of jobs, alarm and network for apps in each bucket for App standby.
  • [C-1-3] MUST NOT deviate from the AOSP implementation for the number of the App Standby Buckets used for App Standby.
  • [C-1-4] MUST implement App Standby Buckets and Doze as described in Power Management .
  • [C-1-5] MUST return true for PowerManager.isPowerSaveMode() when the device is on power save mode.
  • [C-SR] Are STRONGLY RECOMMENDED to provide user affordance to enable and disable the battery saver feature.
  • [C-SR] Are STRONGLY RECOMMENDED to provide user affordance to display all Apps that are exempted from App Standby and Doze power-saving modes.

In addition to the power-saving modes, Android device implementations MAY implement any or all of the 4 sleeping power states as defined by the Advanced Configuration and Power Interface (ACPI).

If device implementations implement S4 power states as defined by the ACPI, they:

  • [C-1-1] MUST enter this state only after the user has taken an explicit action to put the device in an inactive state (eg by closing a lid that is physically part of the device or turning off a vehicle or television) and before the user re-activates the device (eg by opening the lid or turning the vehicle or television back on).

If device implementations implement S3 power states as defined by the ACPI, they:

  • [C-2-1] MUST meet C-1-1 above, or, MUST enter S3 state only when third-party applications do not need the system resources (eg the screen, CPU).

    Conversely, MUST exit from S3 state when third-party applications need the system resources, as described on this SDK.

    For example, while the third party applications request to keep the screen on through FLAG_KEEP_SCREEN_ON or keep CPU running through PARTIAL_WAKE_LOCK , the device MUST NOT enter S3 state unless, as described in C-1-1, the user has taken explicit action to put the device in an inactive state. Conversely, at a time when a task that third party apps implement through JobScheduler is triggered or Firebase Cloud Messaging is delivered to third party apps, the device MUST exit the S3 state unless the user has put the device in an inactive state. These are not comprehensive examples and AOSP implements extensive wake-up signals that trigger a wakeup from this state.

8.4. Power Consumption Accounting

A more accurate accounting and reporting of the power consumption provides the app developer both the incentives and the tools to optimize the power usage pattern of the application.

Implémentations d'appareils :

  • [SR] STRONGLY RECOMMENDED to provide a per-component power profile that defines the current consumption value for each hardware component and the approximate battery drain caused by the components over time as documented in the Android Open Source Project site.
  • [SR] STRONGLY RECOMMENDED to report all power consumption values in milliampere hours (mAh).
  • [SR] STRONGLY RECOMMENDED to report CPU power consumption per each process's UID. The Android Open Source Project meets the requirement through the uid_cputime kernel module implementation.
  • [SR] STRONGLY RECOMMENDED to make this power usage available via the adb shell dumpsys batterystats shell command to the app developer.
  • SHOULD be attributed to the hardware component itself if unable to attribute hardware component power usage to an application.

8.5. Consistent Performance

Performance can fluctuate dramatically for high-performance long-running apps, either because of the other apps running in the background or the CPU throttling due to temperature limits. Android includes programmatic interfaces so that when the device is capable, the top foreground application can request that the system optimize the allocation of the resources to address such fluctuations.

Implémentations d'appareils :

If device implementations report support of Sustained Performance Mode, they:

  • [C-1-1] MUST provide the top foreground application a consistent level of performance for at least 30 minutes, when the app requests it.
  • [C-1-2] MUST honor the Window.setSustainedPerformanceMode() API and other related APIs.

If device implementations include two or more CPU cores, they:

  • SHOULD provide at least one exclusive core that can be reserved by the top foreground application.

If device implementations support reserving one exclusive core for the top foreground application, they:

  • [C-2-1] MUST report through the Process.getExclusiveCores() API method the ID numbers of the exclusive cores that can be reserved by the top foreground application.
  • [C-2-2] MUST not allow any user space processes except the device drivers used by the application to run on the exclusive cores, but MAY allow some kernel processes to run as necessary.

If device implementations do not support an exclusive core, they:

9. Compatibilité des modèles de sécurité

Implémentations d'appareils :

  • [C-0-1] MUST implement a security model consistent with the Android platform security model as defined in Security and Permissions reference document in the APIs in the Android developer documentation.

  • [C-0-2] MUST support installation of self-signed applications without requiring any additional permissions/certificates from any third parties/authorities. Specifically, compatible devices MUST support the security mechanisms described in the follow subsections.

9.1. Autorisations

Implémentations d'appareils :

  • [C-0-1] MUST support the Android permissions model as defined in the Android developer documentation. Specifically, they MUST enforce each permission defined as described in the SDK documentation; Aucune autorisation ne peut être omise, modifiée ou ignorée.

  • MAY add additional permissions, provided the new permission ID strings are not in the android.\* namespace.

  • [C-0-2] Permissions with a protectionLevel of PROTECTION_FLAG_PRIVILEGED MUST only be granted to apps preinstalled in the privileged path(s) of the system image and within the subset of the explicitly allowlisted permissions for each app. The AOSP implementation meets this requirement by reading and honoring the allowlisted permissions for each app from the files in the etc/permissions/ path and using the system/priv-app path as the privileged path.

Permissions with a protection level of dangerous are runtime permissions. Applications with targetSdkVersion > 22 request them at runtime.

Implémentations d'appareils :

  • [C-0-3] MUST show a dedicated interface for the user to decide whether to grant the requested runtime permissions and also provide an interface for the user to manage runtime permissions.
  • [C-0-4] MUST have one and only one implementation of both user interfaces.
  • [C-0-5] MUST NOT grant any runtime permissions to preinstalled apps unless:
    • The user's consent can be obtained before the application uses it.
    • The runtime permissions are associated with an intent pattern for which the preinstalled application is set as the default handler.
  • [C-0-6] MUST grant the android.permission.RECOVER_KEYSTORE permission only to system apps that register a properly secured Recovery Agent. A properly secured Recovery Agent is defined as an on-device software agent that synchronizes with an off-device remote storage, that is equipped with secure hardware with protection equivalent or stronger than what is described in Google Cloud Key Vault Service to prevent brute-force attacks on the lockscreen knowledge factor.

If device implementations include a preinstalled app or wish to allow third-party apps to access the usage statistics, they:

  • [SR] are STRONGLY RECOMMENDED provide user-accessible mechanism to grant or revoke access to the usage stats in response to the android.settings.ACTION_USAGE_ACCESS_SETTINGS intent for apps that declare the android.permission.PACKAGE_USAGE_STATS permission.

If device implementations intend to disallow any apps, including preinstalled apps, from accessing the usage statistics, they:

  • [C-1-1] MUST still have an activity that handles the android.settings.ACTION_USAGE_ACCESS_SETTINGS intent pattern but MUST implement it as a no-op, that is to have an equivalent behavior as when the user is declined for access.

9.2. UID et isolation des processus

Implémentations d'appareils :

  • [C-0-1] MUST support the Android application sandbox model, in which each application runs as a unique Unixstyle UID and in a separate process.
  • [C-0-2] MUST support running multiple applications as the same Linux user ID, provided that the applications are properly signed and constructed, as defined in the Security and Permissions reference .

9.3. Autorisations du système de fichiers

Implémentations d'appareils :

9.4. Environnements d'exécution alternatifs

Device implementations MUST keep consistency of the Android security and permission model, even if they include runtime environments that execute applications using some other software or technology than the Dalvik Executable Format or native code. Autrement dit:

  • [C-0-1] Alternate runtimes MUST themselves be Android applications, and abide by the standard Android security model, as described elsewhere in section 9 .

  • [C-0-2] Alternate runtimes MUST NOT be granted access to resources protected by permissions not requested in the runtime's AndroidManifest.xml file via the < uses-permission > mechanism.

  • [C-0-3] Alternate runtimes MUST NOT permit applications to make use of features protected by Android permissions restricted to system applications.

  • [C-0-4] Alternate runtimes MUST abide by the Android sandbox model and installed applications using an alternate runtime MUST NOT reuse the sandbox of any other app installed on the device, except through the standard Android mechanisms of shared user ID and signing certificate .

  • [C-0-5] Alternate runtimes MUST NOT launch with, grant, or be granted access to the sandboxes corresponding to other Android applications.

  • [C-0-6] Alternate runtimes MUST NOT be launched with, be granted, or grant to other applications any privileges of the superuser (root), or of any other user ID.

  • [C-0-7] When the .apk files of alternate runtimes are included in the system image of device implementations, it MUST be signed with a key distinct from the key used to sign other applications included with the device implementations.

  • [C-0-8] When installing applications, alternate runtimes MUST obtain user consent for the Android permissions used by the application.

  • [C-0-9] When an application needs to make use of a device resource for which there is a corresponding Android permission (such as Camera, GPS, etc.), the alternate runtime MUST inform the user that the application will be able to access that resource.

  • [C-0-10] When the runtime environment does not record application capabilities in this manner, the runtime environment MUST list all permissions held by the runtime itself when installing any application using that runtime.

  • Alternate runtimes SHOULD install apps via the PackageManager into separate Android sandboxes (Linux user IDs, etc.).

  • Alternate runtimes MAY provide a single Android sandbox shared by all applications using the alternate runtime.

9.5. Multi-User Support

Android includes support for multiple users and provides support for full user isolation.

  • Device implementations MAY but SHOULD NOT enable multi-user if they use removable media for primary external storage.

If device implementations include multiple users, they:

  • [C-1-1] MUST meet the following requirements related to multi-user support .
  • [C-1-2] MUST, for each user, implement a security model consistent with the Android platform security model as defined in Security and Permissions reference document in the APIs.
  • [C-1-3] MUST have separate and isolated shared application storage (aka /sdcard ) directories for each user instance.
  • [C-1-4] MUST ensure that applications owned by and running on behalf a given user cannot list, read, or write to the files owned by any other user, even if the data of both users are stored on the same volume or système de fichiers.
  • [C-1-5] MUST encrypt the contents of the SD card when multiuser is enabled using a key stored only on non-removable media accessible only to the system if device implementations use removable media for the external storage APIs. As this will make the media unreadable by a host PC, device implementations will be required to switch to MTP or a similar system to provide host PCs with access to the current user's data.

If device implementations include multiple users and do not declare the android.hardware.telephony feature flag, they:

  • [C-2-1] MUST support restricted profiles, a feature that allows device owners to manage additional users and their capabilities on the device. With restricted profiles, device owners can quickly set up separate environments for additional users to work in, with the ability to manage finer-grained restrictions in the apps that are available in those environments.

If device implementations include multiple users and declare the android.hardware.telephony feature flag, they:

  • [C-3-1] MUST NOT support restricted profiles but MUST align with the AOSP implementation of controls to enable /disable other users from accessing the voice calls and SMS.

9.6. Premium SMS Warning

Android includes support for warning users of any outgoing premium SMS message . Premium SMS messages are text messages sent to a service registered with a carrier that may incur a charge to the user.

If device implementations declare support for android.hardware.telephony , they:

  • [C-1-1] MUST warn users before sending a SMS message to numbers identified by regular expressions defined in /data/misc/sms/codes.xml file in the device. The upstream Android Open Source Project provides an implementation that satisfies this requirement.

9.7. Fonctions de sécurité

Device implementations MUST ensure compliance with security features in both the kernel and platform as described below.

The Android Sandbox includes features that use the Security-Enhanced Linux (SELinux) mandatory access control (MAC) system, seccomp sandboxing, and other security features in the Linux kernel. Implémentations d'appareils :

  • [C-0-1] MUST maintain compatibility with existing applications, even when SELinux or any other security features are implemented below the Android framework.
  • [C-0-2] MUST NOT have a visible user interface when a security violation is detected and successfully blocked by the security feature implemented below the Android framework, but MAY have a visible user interface when an unblocked security violation occurs resulting in a successful exploiter.
  • [C-0-3] MUST NOT make SELinux or any other security features implemented below the Android framework configurable to the user or app developer.
  • [C-0-4] MUST NOT allow an application that can affect another application through an API (such as a Device Administration API) to configure a policy that breaks compatibility.
  • [C-0-5] MUST split the media framework into multiple processes so that it is possible to more narrowly grant access for each process as described in the Android Open Source Project site.
  • [C-0-6] MUST implement a kernel application sandboxing mechanism which allows filtering of system calls using a configurable policy from multithreaded programs. The upstream Android Open Source Project meets this requirement through enabling the seccomp-BPF with threadgroup synchronization (TSYNC) as described in the Kernel Configuration section of source.android.com .

Kernel integrity and self-protection features are integral to Android security. Implémentations d'appareils :

  • [C-0-7] MUST implement kernel stack buffer overflow protections (eg CONFIG_CC_STACKPROTECTOR_STRONG ).
  • [C-0-8] MUST implement strict kernel memory protections where executable code is read-only, read-only data is non-executable and non-writable, and writable data is non-executable (eg CONFIG_DEBUG_RODATA or CONFIG_STRICT_KERNEL_RWX ).
  • [C-0-9] MUST implement static and dynamic object size bounds checking of copies between user-space and kernel-space (eg CONFIG_HARDENED_USERCOPY ) on devices originally shipping with API level 28 or higher.
  • [C-0-10] MUST NOT execute user-space memory when executing in the kernel mode (eg hardware PXN, or emulated via CONFIG_CPU_SW_DOMAIN_PAN or CONFIG_ARM64_SW_TTBR0_PAN ) on devices originally shipping with API level 28 or higher.
  • [C-0-11] MUST NOT read or write user-space memory in the kernel outside of normal usercopy access APIs (eg hardware PAN, or emulated via CONFIG_CPU_SW_DOMAIN_PAN or CONFIG_ARM64_SW_TTBR0_PAN ) on devices originally shipping with API level 28 or higher.
  • [C-0-12] MUST implement kernel page table isolation on all devices originally shipping with API level 28 or higher (eg CONFIG_PAGE_TABLE_ISOLATION or `CONFIG_UNMAP_KERNEL_AT_EL0).
  • [SR] STRONGLY RECOMMENDED to keep kernel data which is written only during initialization marked read-only after initialization (eg __ro_after_init ).
  • [SR] STRONGLY RECOMMENDED to randomize the layout of the kernel code and memory, and to avoid exposures that would compromise the randomization (eg CONFIG_RANDOMIZE_BASE with bootloader entropy via the /chosen/kaslr-seed Device Tree node or EFI_RNG_PROTOCOL ).

If device implementations use a Linux kernel, they:

  • [C-1-1] MUST implement SELinux.
  • [C-1-2] MUST set SELinux to global enforcing mode.
  • [C-1-3] MUST configure all domains in enforcing mode. No permissive mode domains are allowed, including domains specific to a device/vendor.
  • [C-1-4] MUST NOT modify, omit, or replace the neverallow rules present within the system/sepolicy folder provided in the upstream Android Open Source Project (AOSP) and the policy MUST compile with all neverallow rules present, for both AOSP SELinux domains as well as device/vendor specific domains.
  • [C-1-5] MUST run third-party applications targeting API level 28 or higher in per-application SELinux sandboxes with per-app SELinux restrictions on each application's private data directory.
  • SHOULD retain the default SELinux policy provided in the system/sepolicy folder of the upstream Android Open Source Project and only further add to this policy for their own device-specific configuration.

If device implementations use kernel other than Linux, they:

  • [C-2-1] MUST use a mandatory access control system that is equivalent to SELinux.

Android contains multiple defense-in-depth features that are integral to device security.

Implémentations d'appareils :

  • [C-SR] Are STRONGLY RECOMMENDED not to disable Control-Flow Integrity (CFI) or Integer Overflow Sanitization (IntSan) on components that have it enabled.
  • [C-SR] Are STRONGLY RECOMMENDED to enable both CFI and IntSan for any additional security-sensitive userspace components as explained in CFI and IntSan .

9.8. Confidentialité

9.8.1. Historique d'utilisation

Android stores the history of the user's choices and manages such history by UsageStatsManager .

Implémentations d'appareils :

  • [C-0-1] MUST keep a reasonable retention period of such user history.
  • [SR] Are STRONGLY RECOMMENDED to keep the 14 days retention period as configured by default in the AOSP implementation.

Android stores the system events using the StatsLog identifiers, and manages such history via the StatsManager and the IncidentManager System API.

Implémentations d'appareils :

  • [C-0-2] MUST only include the fields marked with DEST_AUTOMATIC in the incident report created by the System API class IncidentManager .
  • [C-0-3] MUST not use the system event identifiers to log any other event than what is described in the StatsLog SDK documents. If additional system events are logged, they MAY use a different atom identifier in the range between 100,000 and 200,000.

9.8.2. Enregistrement

Implémentations d'appareils :

  • [C-0-1] MUST NOT preload or distribute software components out-of-box that send the user's private information (eg keystrokes, text displayed on the screen) off the device without the user's consent or clear ongoing notifications.

If device implementations include functionality in the system that captures the contents displayed on the screen and/or records the audio stream played on the device, they:

  • [C-1-1] MUST have an ongoing notification to the user whenever this functionality is enabled and actively capturing/recording.

If device implementations include a component enabled out-of-box, capable of recording ambient audio to infer useful information about user's context, they:

  • [C-2-1] MUST NOT store in persistent on-device storage or transmit off the device the recorded raw audio or any format that can be converted back into the original audio or a near facsimile, except with explicit user consent.

9.8.3. Connectivité

If device implementations have a USB port with USB peripheral mode support, they:

  • [C-1-1] MUST present a user interface asking for the user's consent before allowing access to the contents of the shared storage over the USB port.

9.8.4. Network Traffic

Implémentations d'appareils :

  • [C-0-1] MUST preinstall the same root certificates for the system-trusted Certificate Authority (CA) store as provided in the upstream Android Open Source Project.
  • [C-0-2] MUST ship with an empty user root CA store.
  • [C-0-3] MUST display a warning to the user indicating the network traffic may be monitored, when a user root CA is added.

If device traffic is routed through a VPN, device implementations:

  • [C-1-1] MUST display a warning to the user indicating either:
    • That network traffic may be monitored.
    • That network traffic is being routed through the specific VPN application providing the VPN.

If device implementations have a mechanism, enabled out-of-box by default, that routes network data traffic through a proxy server or VPN gateway (for example, preloading a VPN service with android.permission.CONTROL_VPN granted), they:

  • [C-2-1] MUST ask for the user's consent before enabling that mechanism, unless that VPN is enabled by the Device Policy Controller via the DevicePolicyManager.setAlwaysOnVpnPackage() , in which case the user does not need to provide a separate consent, but MUST only be notified.

If device implementations implement a user affordance to toggle on the "always-on VPN" function of a 3rd-party VPN app, they:

  • [C-3-1] MUST disable this user affordance for apps that do not support always-on VPN service in the AndroidManifest.xml file via setting the SERVICE_META_DATA_SUPPORTS_ALWAYS_ON attribute to false .

9.9. Data Storage Encryption

If Advanced Encryption Standard (AES) crypto performance, measured with the most performant AES technology available on the device (eg the ARM Cryptography Extensions), is above 50 MiB/sec, device implementations:

  • [C-1-1] MUST support data storage encryption of the application private data ( /data partition), as well as the application shared storage partition ( /sdcard partition) if it is a permanent, non-removable part of the device, except for device implementations that are typically shared (eg Television).
  • [C-1-2] MUST enable the data storage encryption by default at the time the user has completed the out-of-box setup experience, except for device implementations that are typically shared (eg Television).

If the AES crypto performance is at or below 50 MiB/sec, device implementations MAY use Adiantum-XChaCha12-AES instead of the form of AES listed in any of the following: AES-256-XTS in Section 9.9.2 [C-1-5]; AES-256 in CBS-CTS mode in Section 9.9.2 [C-1-6]; AES in Section 9.9.3 [C-1-1]; AES in Section 9.9.3 [C-1-3].

If device implementations are already launched on an earlier Android version and cannot meet the requirement through a system software update, they MAY be exempted from the above requirements.

Implémentations d'appareils :

9.9.1. Direct Boot

Implémentations d'appareils :

  • [C-0-1] MUST implement the Direct Boot mode APIs even if they do not support Storage Encryption.

  • [C-0-2] The ACTION_LOCKED_BOOT_COMPLETED and ACTION_USER_UNLOCKED Intents MUST still be broadcast to signal Direct Boot aware applications that Device Encrypted (DE) and Credential Encrypted (CE) storage locations are available for user.

9.9.2. File Based Encryption

If device implementations support FBE, they:

  • [C-1-1] MUST boot up without challenging the user for credentials and allow Direct Boot aware apps to access to the Device Encrypted (DE) storage after the ACTION_LOCKED_BOOT_COMPLETED message is broadcasted.
  • [C-1-2] MUST only allow access to Credential Encrypted (CE) storage after the user has unlocked the device by supplying their credentials (eg. passcode, pin, pattern or fingerprint) and the ACTION_USER_UNLOCKED message is broadcasted.
  • [C-1-3] MUST NOT offer any method to unlock the CE protected storage without either the user-supplied credentials or a registered escrow key.
  • [C-1-4] MUST support Verified Boot and ensure that DE keys are cryptographically bound to the device's hardware root of trust.
  • [C-1-5] MUST support encrypting file contents using AES-256-XTS. AES-256-XTS refers to the Advanced Encryption Standard with a 256-bit key length, operated in XTS mode. The full length of the XTS key is 512 bits.
  • [C-1-6] MUST support encrypting file names using AES-256 in CBC-CTS mode.

  • The keys protecting CE and DE storage areas:

  • [C-1-7] MUST be cryptographically bound to a hardware-backed Keystore.

  • [C-1-8] CE keys MUST be bound to a user's lock screen credentials.
  • [C-1-9] CE keys MUST be bound to a default passcode when the user has not specified lock screen credentials.
  • [C-1-10] MUST be unique and distinct, in other words no user's CE or DE key matches any other user's CE or DE keys.

  • [C-1-11] MUST use the mandatorily supported ciphers, key lengths and modes by default.

  • [C-SR] Are STRONGLY RECOMMENDED to encrypt file system metadata, such as file sizes, ownership, modes, and Extended attributes (xattrs), with a key cryptographically bound to the device's hardware root of trust.

  • SHOULD make preinstalled essential apps (eg Alarm, Phone, Messenger) Direct Boot aware.

  • MAY support alternative ciphers, key lengths and modes for file content and file name encryption.

The upstream Android Open Source project provides a preferred implementation of this feature based on the Linux kernel ext4 encryption feature.

9.9.3. Chiffrement complet du disque

If device implementations support full disk encryption (FDE), they:

  • [C-1-1] MUST use AES in a mode designed for storage (for example, XTS or CBC-ESSIV), and with a cipher key length of 128 bits or greater.
  • [C-1-2] MUST use a default passcode to wrap the encryption key and MUST NOT write the encryption key to storage at any time without being encrypted.
  • [C-1-3] MUST AES encrypt the encryption key by default unless the user explicitly opts out, except when it is in active use, with the lock screen credentials stretched using a slow stretching algorithm (eg PBKDF2 or scrypt).
  • [C-1-4] The above default password stretching algorithm MUST be cryptographically bound to that keystore when the user has not specified a lock screen credentials or has disabled use of the passcode for encryption and the device provides a hardware-backed keystore.
  • [C-1-5] MUST NOT send encryption key off the device (even when wrapped with the user passcode and/or hardware bound key).

The upstream Android Open Source project provides a preferred implementation of this feature, based on the Linux kernel feature dm-crypt.

9.10. Device Integrity

The following requirements ensures there is transparency to the status of the device integrity. Implémentations d'appareils :

  • [C-0-1] MUST correctly report through the System API method PersistentDataBlockManager.getFlashLockState() whether their bootloader state permits flashing of the system image. The FLASH_LOCK_UNKNOWN state is reserved for device implementations upgrading from an earlier version of Android where this new system API method did not exist.

  • [C-0-2] MUST support Verified Boot for device integrity.

If device implementations are already launched without supporting Verified Boot on an earlier version of Android and can not add support for this feature with a system software update, they MAY be exempted from the requirement.

Verified Boot is a feature that guarantees the integrity of the device software. If device implementations support the feature, they:

  • [C-1-1] MUST declare the platform feature flag android.software.verified_boot .
  • [C-1-2] MUST perform verification on every boot sequence.
  • [C-1-3] MUST start verification from an immutable hardware key that is the root of trust and go all the way up to the system partition.
  • [C-1-4] MUST implement each stage of verification to check the integrity and authenticity of all the bytes in the next stage before executing the code in the next stage.
  • [C-1-5] MUST use verification algorithms as strong as current recommendations from NIST for hashing algorithms (SHA-256) and public key sizes (RSA-2048).
  • [C-1-6] MUST NOT allow boot to complete when system verification fails, unless the user consents to attempt booting anyway, in which case the data from any non-verified storage blocks MUST not be used.
  • [C-1-7] MUST NOT allow verified partitions on the device to be modified unless the user has explicitly unlocked the bootloader.
  • [C-SR] If there are multiple discrete chips in the device (eg radio, specialized image processor), the boot process of each of those chips is STRONGLY RECOMMENDED to verify every stage upon booting.
  • [C-1-8] MUST use tamper-evident storage: for storing whether the bootloader is unlocked. Tamper-evident storage means that the boot loader can detect if the storage has been tampered with from inside Android.
  • [C-1-9] MUST prompt the user, while using the device, and require physical confirmation before allowing a transition from boot loader locked mode to boot loader unlocked mode.
  • [C-1-10] MUST implement rollback protection for partitions used by Android (eg boot, system partitions) and use tamper-evident storage for storing the metadata used for determining the minimum allowable OS version.
  • [C-SR] Are STRONGLY RECOMMENDED to verify all privileged app APK files with a chain of trust rooted in /system , which is protected by Verified Boot.
  • [C-SR] Are STRONGLY RECOMMENDED to verify any executable artifacts loaded by a privileged app from outside its APK file (such as dynamically loaded code or compiled code) before executing them or STRONGLY RECOMMENDED not to execute them at all.
  • SHOULD implement rollback protection for any component with persistent firmware (eg modem, camera) and SHOULD use tamper-evident storage for storing the metadata used for determining the minimum allowable version.

If device implementations are already launched without supporting C-1-8 through C-1-10 on an earlier version of Android and can not add support for these requirements with a system software update, they MAY be exempted from the requirements.

The upstream Android Open Source Project provides a preferred implementation of this feature in the external/avb/ repository, which can be integrated into the boot loader used for loading Android.

Implémentations d'appareils :

If device implementations support the Android Protected Confirmation API they:

  • [C-3-1] MUST report true for the ConfirmationPrompt.isSupported() API.
  • [C-3-2] MUST ensure that secure hardware takes full control of display in such a way that Android OS cannot block it without detection by the secure hardware.
  • [C-3-3] MUST ensure that secure hardware takes full control of the touch screen.

9.11. Keys and Credentials

The Android Keystore System allows app developers to store cryptographic keys in a container and use them in cryptographic operations through the KeyChain API or the Keystore API . Implémentations d'appareils :

  • [C-0-1] MUST allow at least 8,192 keys to be imported or generated.
  • [C-0-2] The lock screen authentication MUST rate-limit attempts and MUST have an exponential backoff algorithm. Beyond 150 failed attempts, the delay MUST be at least 24 hours per attempt.
  • SHOULD not limit the number of keys that can be generated

When the device implementation supports a secure lock screen, it:

  • [C-1-1] MUST back up the keystore implementation with an isolated execution environment.
  • [C-1-2] MUST have implementations of RSA, AES, ECDSA and HMAC cryptographic algorithms and MD5, SHA1, and SHA-2 family hash functions to properly support the Android Keystore system's supported algorithms in an area that is securely isolated from the code running on the kernel and above. Secure isolation MUST block all potential mechanisms by which kernel or userspace code might access the internal state of the isolated environment, including DMA. The upstream Android Open Source Project (AOSP) meets this requirement by using the Trusty implementation, but another ARM TrustZone-based solution or a third-party reviewed secure implementation of a proper hypervisor-based isolation are alternative options.
  • [C-1-3] MUST perform the lock screen authentication in the isolated execution environment and only when successful, allow the authentication-bound keys to be used. Lock screen credentials MUST be stored in a way that allows only the isolated execution environment to perform lock screen authentication. The upstream Android Open Source Project provides the Gatekeeper Hardware Abstraction Layer (HAL) and Trusty, which can be used to satisfy this requirement.
  • [C-1-4] MUST support key attestation where the attestation signing key is protected by secure hardware and signing is performed in secure hardware. The attestation signing keys MUST be shared across large enough number of devices to prevent the keys from being used as device identifiers. One way of meeting this requirement is to share the same attestation key unless at least 100,000 units of a given SKU are produced. If more than 100,000 units of an SKU are produced, a different key MAY be used for each 100,000 units.
  • [C-1-5] MUST allow the user to choose the Sleep timeout for transition from the unlocked to the locked state, with a minimum allowable timeout up to 15 seconds.

Note that if a device implementation is already launched on an earlier Android version, such a device is exempted from the requirement to have a keystore backed by an isolated execution environment and support the key attestation, unless it declares the android.hardware.fingerprint feature which requires a keystore backed by an isolated execution environment.

9.11.1. Secure Lock Screen

The AOSP implementation follows a tiered authentication model where a knowledge-factory based primary authentication can be backed by either a secondary strong biometric, or by weaker tertiary modalities.

Implémentations d'appareils :

  • [C-SR] Are STRONGLY RECOMMENDED to set only one of the following as the primary authentication method:
    • A numerical PIN
    • An alphanumerical password
    • A swipe pattern on a grid of exactly 3x3 dots

Note that the above authentication methods are referred as the recommended primary authentication methods in this document.

If device implementations add or modify the recommended primary authentication methods and use a new authentication method as a secure way to lock the screen, the new authentication method:

If device implementations add or modify the authentication methods to unlock the lock screen if based on a known secret and use a new authentication method to be treated as a secure way to lock the screen:

  • [C-3-1] The entropy of the shortest allowed length of inputs MUST be greater than 10 bits.
  • [C-3-2] The maximum entropy of all possible inputs MUST be greater than 18 bits.
  • [C-3-3] The new authentication method MUST NOT replace any of the recommended primary authentication methods (ie PIN, pattern, password) implemented and provided in AOSP.
  • [C-3-4] The new authentication method MUST be disabled when the Device Policy Controller (DPC) application has set the password quality policy via the DevicePolicyManager.setPasswordQuality() method with a more restrictive quality constant than PASSWORD_QUALITY_SOMETHING .

If device implementations add or modify the recommended primary authentication methods to unlock the lock screen and use a new authentication method that is based on biometrics to be treated as a secure way to lock the screen, the new method:

  • [C-4-1] MUST meet all requirements described in section 7.3.10.2 .
  • [C-4-2] MUST have a fall-back mechanism to use one of the recommended primary authentication methods which is based on a known secret.
  • [C-4-3] MUST be disabled and only allow the recommended primary authentication to unlock the screen when the Device Policy Controller (DPC) application has set the keguard feature policy by calling the method DevicePolicyManager.setKeyguardDisabledFeatures() , with any of the associated biometric flags (ie KEYGUARD_DISABLE_BIOMETRICS , KEYGUARD_DISABLE_FINGERPRINT , KEYGUARD_DISABLE_FACE , or KEYGUARD_DISABLE_IRIS ).
  • [C-4-4] MUST challenge the user for the recommended primary authentication (eg PIN, pattern, password) at least once every 72 hours or less.
  • [C-4-5] MUST have a false acceptance rate that is equal or stronger than what is required for a fingerprint sensor as described in section section 7.3.10 , or otherwise MUST be disabled and only allow the recommended primary authentication to unlock the screen when the Device Policy Controller (DPC) application has set the password quality policy via the DevicePolicyManager.setPasswordQuality() method with a more restrictive quality constant than PASSWORD_QUALITY_BIOMETRIC_WEAK .
  • [C-SR] Are STRONGLY RECOMMENDED to have spoof and imposter acceptance rates that are equal to or stronger than what is required for a fingerprint sensor as described in section 7.3.10 .
  • [C-4-6] MUST have a secure processing pipeline such that an operating system or kernel compromise cannot allow data to be directly injected to falsely authenticate as the user.
  • [C-4-7] MUST be paired with an explicit confirm action (eg: a button press) to allow access to keystore keys if the application sets true for KeyGenParameterSpec.Built.setUserAuthenticationRequired() and the biometric is passive (eg face or iris where no explicit signal of intent exists).
  • [C-SR] The confirm action for passive biometrics is STRONGLY RECOMMENDED to be secured such that an operating system or kernel compromise cannot spoof it. For example, this means that the confirm action based on a physical button is routed through an input-only general-purpose input/output (GPIO) pin of a secure element (SE) that cannot be driven by any other means than a physical button presse.

If the biometric authentication methods do not meet the spoof and imposter acceptance rates as described in section 7.3.10 :

  • [C-5-1] The methods MUST be disabled if the Device Policy Controller (DPC) application has set the password quality policy via the DevicePolicyManager.setPasswordQuality() method with a more restrictive quality constant than PASSWORD_QUALITY_BIOMETRIC_WEAK .
  • [C-5-2] The user MUST be challenged for the recommended primary authentication (eg: PIN, pattern, password) after any 4-hour idle timeout period. The idle timeout period is reset after any successful confirmation of the device credentials.
  • [C-5-3] The methods MUST NOT be treated as a secure lock screen, and MUST meet the requirements that start with C-8 in this section below.

If device implementations add or modify the authentication methods to unlock the lock screen and a new authentication method is based on a physical token or the location:

  • [C-6-1] They MUST have a fall-back mechanism to use one of the recommended primary authentication methods which is based on a known secret and meet the requirements to be treated as a secure lock screen.
  • [C-6-2] The new method MUST be disabled and only allow one of the recommended primary authentication methods to unlock the screen when the Device Policy Controller (DPC) application has set the policy with either the DevicePolicyManager.setKeyguardDisabledFeatures(KEYGUARD_DISABLE_TRUST_AGENTS) method or the DevicePolicyManager.setPasswordQuality() method with a more restrictive quality constant than PASSWORD_QUALITY_UNSPECIFIED .
  • [C-6-3] The user MUST be challenged for one of the recommended primary authentication methods (egPIN, pattern, password) at least once every 72 hours or less.
  • [C-6-4] The new method MUST NOT be treated as a secure lock screen and MUST follow the constraints listed in C-8 below.

If device implementations have a secure lock screen and include one or more trust agent, which implements the TrustAgentService System API, they:

  • [C-7-1] MUST have clear indication in the settings menu and on the lock screen when device lock is deferred or can be unlocked by trust agent(s). For example, AOSP meets this requirement by showing a text description for the "Automatically lock setting" and "Power button instantly locks" in the settings menu and a distinguishable icon on the lock screen.
  • [C-7-2] MUST respect and fully implement all trust agent APIs in the DevicePolicyManager class, such as the KEYGUARD_DISABLE_TRUST_AGENTS constant.
  • [C-7-3] MUST NOT fully implement the TrustAgentService.addEscrowToken() function on a device that is used as a primary personal device (eg handheld) but MAY fully implement the function on device implementations that are typically shared (eg Android Television or Automotive device).
  • [C-7-4] MUST encrypt all stored tokens added by TrustAgentService.addEscrowToken() .
  • [C-7-5] MUST NOT store the encryption key on the same device where the key is used. For example, it is allowed for a key stored on a phone to unlock a user account on a TV.
  • [C-7-6] MUST inform the user about the security implications before enabling the escrow token to decrypt the data storage.
  • [C-7-7] MUST have a fall-back mechanism to use one of the recommended primary authentication methods.
  • [C-7-8] The user MUST be challenged for one of the recommended primary authentication (eg: PIN, pattern, password) methods at least once every 72 hours or less.
  • [C-7-9] The user MUST be challenged for one of the recommended primary authentication (eg: PIN, pattern, password) methods after any 4-hour idle timeout period. The idle timeout period is reset after any successful confirmation of the device credentials.
  • [C-7-10] MUST NOT be treated as a secure lock screen and MUST follow the constraints listed in C-8 below.

If device implementations add or modify the authentication methods to unlock the lock screen that is not a secure lock screen as described above, and use a new authentication method to unlock the keyguard:

9.11.2. StrongBox

The Android Keystore System allows app developers to store cryptographic keys in a dedicated secure processor as well as the isolated execution environment described above.

Implémentations d'appareils :

  • [C-SR] Are STRONGLY RECOMMENDED to support StrongBox.

If device implementations support StrongBox, they:

  • [C-1-1] MUST declare FEATURE_STRONGBOX_KEYSTORE .

  • [C-1-2] MUST provide dedicated secure hardware that is used to back keystore and secure user authentication.

  • [C-1-3] MUST have a discrete CPU that shares no cache, DRAM, coprocessors or other core resources with the application processor (AP).

  • [C-1-4] MUST ensure that any peripherals shared with the AP cannot alter StrongBox processing in any way, or obtain any information from the StrongBox. The AP MAY disable or block access to StrongBox.

  • [C-1-5] MUST have an internal clock with reasonable accuracy (+-10%) that is immune to manipulation by the AP.

  • [C-1-6] MUST have a true random number generator that produces uniformly-distributed and unpredictable output.

  • [C-1-7] MUST have tamper resistance, including resistance against physical penetration, and glitching.

  • [C-1-8] MUST have side-channel resistance, including resistance against leaking information via power, timing, electromagnetic radiation, and thermal radiation side channels.

  • [C-1-9] MUST have secure storage which ensures confidentiality, integrity, authenticity, consistency, and freshness of the contents. The storage MUST NOT be able to be read or altered, except as permitted by the StrongBox APIs.

  • To validate compliance with [C-1-3] through [C-1-9], device implementations:

    • [C-1-10] MUST include the hardware that is certified against the Secure IC Protection Profile BSI-CC-PP-0084-2014 or evaluated by a nationally accredited testing laboratory incorporating High attack potential vulnerability assessment according to the Common Criteria Application of Attack Potential to Smartcards .
    • [C-1-11] MUST include the firmware that is evaluated by a nationally accredited testing laboratory incorporating High attack potential vulnerability assessment according to the Common Criteria Application of Attack Potential to Smartcards .
    • [C-SR] Are STRONGLY RECOMMENDED to include the hardware that is evaluated using a Security Target, Evaluation Assurance Level (EAL) 5, augmented by AVA_VAN.5. EAL 5 certification will likely become a requirement in a future release.
  • [C-SR] are STRONGLY RECOMMENDED to provide insider attack resistance (IAR), which means that an insider with access to firmware signing keys cannot produce firmware that causes the StrongBox to leak secrets, to bypass functional security requirements or otherwise enable access to sensitive données d'utilisateur. The recommended way to implement IAR is to allow firmware updates only when the primary user password is provided via the IAuthSecret HAL.

9.12. Data Deletion

All device implementations:

  • [C-0-1] MUST provide users a mechanism to perform a "Factory Data Reset".
  • [C-0-2] MUST delete all user-generated data. That is, all data except for the following:
    • The system image
    • Any operating system files required by the system image
  • [C-0-3] MUST delete the data in such a way that will satisfy relevant industry standards such as NIST SP800-88.
  • [C-0-4] MUST trigger the above "Factory Data Reset" process when the DevicePolicyManager.wipeData() API is called by the primary user's Device Policy Controller app.
  • MAY provide a fast data wipe option that conducts only a logical data erase.

9.13. Safe Boot Mode

Android provides Safe Boot Mode, which allows users to boot up into a mode where only preinstalled system apps are allowed to run and all third-party apps are disabled. This mode, known as "Safe Boot Mode", provides the user the capability to uninstall potentially harmful third-party apps.

Device implementations are:

  • [SR] STRONGLY RECOMMENDED to implement Safe Boot Mode.

If device implementations implement Safe Boot Mode, they:

  • [C-1-1] MUST provide the user an option to enter Safe Boot Mode in such a way that is uninterruptible from third-party apps installed on the device, except when the third-party app is a Device Policy Controller and has set the UserManager.DISALLOW_SAFE_BOOT flag as true.

  • [C-1-2] MUST provide the user the capability to uninstall any third-party apps within Safe Mode.

  • SHOULD provide the user an option to enter Safe Boot Mode from the boot menu using a workflow that is different from that of a normal boot.

9.14. Automotive Vehicle System Isolation

Android Automotive devices are expected to exchange data with critical vehicle subsystems by using the vehicle HAL to send and receive messages over vehicle networks such as CAN bus.

The data exchange can be secured by implementing security features below the Android framework layers to prevent malicious or unintentional interaction with these subsystems.

9.15. Plans d'abonnement

"Subscription plans" refer to the billing relationship plan details provided by a mobile carrier through SubscriptionManager.setSubscriptionPlans() .

All device implementations:

  • [C-0-1] MUST return subscription plans only to the mobile carrier app that has originally provided them.
  • [C-0-2] MUST NOT remotely back up or upload subscription plans.
  • [C-0-3] MUST only allow overrides, such as SubscriptionManager.setSubscriptionOverrideCongested() , from the mobile carrier app currently providing valid subscription plans.

10. Tests de compatibilité logicielle

Device implementations MUST pass all tests described in this section. However, note that no software test package is fully comprehensive. For this reason, device implementers are STRONGLY RECOMMENDED to make the minimum number of changes as possible to the reference and preferred implementation of Android available from the Android Open Source Project. This will minimize the risk of introducing bugs that create incompatibilities requiring rework and potential device updates.

10.1. Suite de tests de compatibilité

Implémentations d'appareils :

  • [C-0-1] MUST pass the Android Compatibility Test Suite (CTS) available from the Android Open Source Project, using the final shipping software on the device.

  • [C-0-2] MUST ensure compatibility in cases of ambiguity in CTS and for any reimplementations of parts of the reference source code.

Le CTS est conçu pour être exécuté sur un appareil réel. Comme tout logiciel, le CTS peut lui-même contenir des bogues. The CTS will be versioned independently of this Compatibility Definition, and multiple revisions of the CTS may be released for Android 9.

Implémentations d'appareils :

  • [C-0-3] MUST pass the latest CTS version available at the time the device software is completed.

  • SHOULD use the reference implementation in the Android Open Source tree as much as possible.

10.2. Vérificateur CTS

The CTS Verifier is included with the Compatibility Test Suite, and is intended to be run by a human operator to test functionality that cannot be tested by an automated system, such as correct functioning of a camera and sensors.

Implémentations d'appareils :

  • [C-0-1] MUST correctly execute all applicable cases in the CTS verifier.

The CTS Verifier has tests for many kinds of hardware, including some hardware that is optional.

Implémentations d'appareils :

  • [C-0-2] MUST pass all tests for hardware that they possess; for instance, if a device possesses an accelerometer, it MUST correctly execute the Accelerometer test case in the CTS Verifier.

Test cases for features noted as optional by this Compatibility Definition Document MAY be skipped or omitted.

  • [C-0-2] Every device and every build MUST correctly run the CTS Verifier, as noted above. However, since many builds are very similar, device implementers are not expected to explicitly run the CTS Verifier on builds that differ only in trivial ways. Specifically, device implementations that differ from an implementation that has passed the CTS Verifier only by the set of included locales, branding, etc. MAY omit the CTS Verifier test.

11. Logiciel pouvant être mis à jour

  • [C-0-1] Device implementations MUST include a mechanism to replace the entirety of the system software. The mechanism need not perform “live” upgrades—that is, a device restart MAY be required. Toute méthode peut être utilisée, à condition qu'il puisse remplacer l'intégralité du logiciel préinstallé sur l'appareil. For instance, any of the following approaches will satisfy this requirement:

    • “Over-the-air (OTA)” downloads with offline update via reboot.
    • “Tethered” updates over USB from a host PC.
    • “Offline” updates via a reboot and update from a file on removable storage.
  • [C-0-2] The update mechanism used MUST support updates without wiping user data. That is, the update mechanism MUST preserve application private data and application shared data. Notez que le logiciel Android en amont comprend un mécanisme de mise à jour qui satisfait à cette exigence.

If the device implementations includes support for an unmetered data connection such as 802.11 or Bluetooth PAN (Personal Area Network) profile, then, they:

  • [C-1-1] MUST support OTA downloads with offline update via reboot.

For device implementations that are launching with Android 6.0 and later, the update mechanism SHOULD support verifying that the system image is binary identical to expected result following an OTA. The block-based OTA implementation in the upstream Android Open Source Project, added since Android 5.1, satisfies this requirement.

Also, device implementations SHOULD support A/B system updates . The AOSP implements this feature using the boot control HAL.

If an error is found in a device implementation after it has been released but within its reasonable product lifetime that is determined in consultation with the Android Compatibility Team to affect the compatibility of third-party applications, then:

  • [C-2-1] The device implementer MUST correct the error via a software update available that can be applied per the mechanism just described.

Android includes features that allow the Device Owner app (if present) to control the installation of system updates. If the system update subsystem for devices report android.software.device_admin then, they:

12. Document Changelog

For a summary of changes to the Compatibility Definition in this release:

For a summary of changes to individuals sections:

  1. Introduction
  2. Types d'appareils
  3. Logiciel
  4. Application Packaging
  5. Multimédia
  6. Developer Tools and Options
  7. Hardware Compatibility
  8. Performance and Power
  9. Security Model
  10. Software Compatibility Testing
  11. Updatable Software
  12. Document Changelog
  13. Contactez-nous

12.1. Changelog Viewing Tips

Changes are marked as follows:

  • CDD
    Substantive changes to the compatibility requirements.

  • Documents
    Cosmetic or build related changes.

For best viewing, append the pretty=full and no-merges URL parameters to your changelog URLs.

13. Contact Us

You can join the android-compatibility forum and ask for clarifications or bring up any issues that you think the document does not cover.